Add ifunc_resolvers to elf_link_hash_table and use it for both x86 and
ppc64. Before glibc commit b5c45e837, DT_TEXTREL is incompatible with
IFUNC resolvers. Set ifunc_resolvers if there are IFUNC resolvers and
issue a warning for IFUNC resolvers with DT_TEXTREL.
bfd/
PR ld/18801
* elf-bfd.h (elf_link_hash_table): Add ifunc_resolvers.
(_bfd_elf_allocate_ifunc_dyn_relocs): Remove the
bfd_boolean * argument. Set ifunc_resolvers if there are IFUNC
resolvers.
* elf-ifunc.c (_bfd_elf_allocate_ifunc_dyn_relocs): Updated.
Set ifunc_resolvers if there are FUNC resolvers.
* elf64-ppc.c (ppc_link_hash_table): Remove local_ifunc_resolver.
(build_global_entry_stubs_and_plt): Replace local_ifunc_resolver
with elf.ifunc_resolvers.
(write_plt_relocs_for_local_syms): Likewise.
(ppc64_elf_relocate_section): Likewise.
(ppc64_elf_finish_dynamic_sections): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_allocate_ifunc_dynrelocs):
Updated.
* elfxx-x86.c (elf_x86_allocate_dynrelocs): Likewise.
(_bfd_x86_elf_size_dynamic_sections): Check elf.ifunc_resolvers
instead of readonly_dynrelocs_against_ifunc.
* elfxx-x86.h (elf_x86_link_hash_table): Remove
readonly_dynrelocs_against_ifunc.
ld/
PR ld/18801
* testsuite/ld-i386/i386.exp: Run ifunc-textrel-1a,
ifunc-textrel-1b, ifunc-textrel-2a and ifunc-textrel-2b.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/ifunc-textrel-1a.d: Likewise.
* testsuite/ld-i386/ifunc-textrel-1b.d: Likewise.
* testsuite/ld-i386/ifunc-textrel-2a.d: Likewise.
* testsuite/ld-i386/ifunc-textrel-2b.d: Likewise.
* testsuite/ld-x86-64/ifunc-textrel-1.s: Likewise.
* testsuite/ld-x86-64/ifunc-textrel-1a.d: Likewise.
* testsuite/ld-x86-64/ifunc-textrel-1b.d: Likewise.
* testsuite/ld-x86-64/ifunc-textrel-2.s: Likewise.
* testsuite/ld-x86-64/ifunc-textrel-2a.d: Likewise.
* testsuite/ld-x86-64/ifunc-textrel-2b.d: Likewise.
* testsuite/ld-i386/pr18801a.d: Expect warning for IFUNC
resolvers.
* testsuite/ld-i386/pr18801b.d: Likewise.
* estsuite/ld-x86-64/pr18801a.d: Likewise.
* estsuite/ld-x86-64/pr18801b.d: Likewise.
$LFLAGS is needed for -shared test. This fixes
FAIL: PR ld/21703 shared
for tic6x-*-elf.
* testsuite/ld-elf/shared.exp: Pass $LFLAGS to PR ld/21703
shared test.
It looks like this one was previously just swept under the rug. Prior
to git commit c4b126b87a, the arm backend emitted an absolute
dynamic symbol "foo" with value zero for what was originally a common
symbol. That was just wrong.
The patch also removes an xfail for bfin-linux-uclibc.
PR 13802
* testsuite/ld-elf/comm-data.exp: Don't xfail arm or bfin-linux.
This patch makes ld accept and ignore -plugin options when configured
with --disable-plugins. The idea is to allow using a linker built
without plugin support with a gcc built with plugin support. Quite
obviously such a combination won't work if using LTO, but gcc has a
habit of passing a bunch of -plugin and -plugin-opt arguments to ld
even when not generating or linking LTO objects.
Why do I want to do this? Well, it lets me and other binutils
developers answer the question as to whether plugin support breaks
binutils in some areas. Which it does for some targets.
* lexsup.c (ld_options): Accept -plugin and -plugin-opt when
!ENABLE_PLUGINS.
* testsuite/lib/ld-lib.exp (check_plugin_api_available): Adjust.
bfd/
* elfnn-riscv.c (riscv_merge_attributes): Add new boolean
priv_may_conflict, in_priv_zero and out_priv_zero to decide whether
the object can be linked according to it's priv attributes. The object
without any priv spec attributes can be linked with others. If the first
input object doesn't contain any priv attributes, then we need to copy
the setting from the next input one. Also report more detailed error
messages to user.
ld/
* testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Rename to
attr-merge-priv-spec-01.d.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-c.s: Set priv spec
to 1.11.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-d.s: Empty priv spec
setting.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-02.d: New testcase.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-05.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-06.d: Likewise.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
gas/
* config/tc-riscv.c (explicit_csr): New static boolean.
Used to indicate CSR are explictly used.
(riscv_ip): Set explicit_csr to TRUE if any CSR is used.
(riscv_write_out_attrs): If we already have set elf priv
attributes, then generate them. Otherwise, don't generate
them when no CSR are used.
* testsuite/gas/riscv/attribute-01.d: Remove the priv attributes.
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: Likewise.
* testsuite/gas/riscv/attribute-10.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-11.s: New testcase.
* testsuite/gas/riscv/attribute-11.d: New testcase. The CSR is
used, so we should output the ELF priv attributes.
* testsuite/gas/riscv/attribute-12.d: New testcase. The CSR is
used, so output the priv attributes according to the -mpriv-spec.
* testsuite/gas/riscv/attribute-13.d: New testcase. The CSR isn't
used, so ignore the -mpriv-spec setting.
ld/
* testsuite/ld-riscv-elf/attr-merge-arch-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise.
* testsuite/ld-riscv-elf/call-relax.d: Add -mno-arch-attr.
Don't do anything special with non-loaded, non-alloced sections.
In particular, any relocs in such sections should not affect GOT
and PLT reference counting (ie. we don't allow them to create GOT
or PLT entries), there's no possibility or desire to optimize TLS
relocs, and there's not much point in propagating relocs to shared
libs that the dynamic linker won't relocate.
Since check_relocs is no longer called on non-loaded, non-alloced
sections, remove SEC_ALLOC check. Resolve relocation in debug section
against symbol defined in shared library to 0.
bfd/
PR ld/26080
* elf-m10300.c (mn10300_elf_relocate_section): Resolve relocation
in debug section against symbol defined in shared library to 0.
* elf32-i386.c (elf_i386_check_relocs): Remove SEC_ALLOC check.
* elf32-lm32.c (lm32_elf_check_relocs): Likewise.
* elf32-m32r.c (m32r_elf_check_relocs): Likewise.
* elf32-nds32.c (nds32_elf_check_relocs): Likewise.
* elf32-nios2.c (nios2_elf32_check_relocs): Likewise.
* elf32-or1k.c (or1k_elf_check_relocs): Likewise.
* elf32-ppc.c (ppc_elf_check_relocs): Likewise.
* elf32-sh.c (sh_elf_check_relocs): Likewise.
* elf32-xtensa.c (elf_xtensa_check_relocs): Likewise.
* elf64-alpha.c (elf64_alpha_check_relocs): Likewise.
* elf64-ppc.c (ppc64_elf_check_relocs): Likewise.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
* elfxx-mips.c (_bfd_mips_elf_check_relocs): Likewise.
* elf32-vax.c (elf_vax_check_relocs): Set non_got_ref for non-GOT
reference.
(elf_vax_adjust_dynamic_symbol): Generate a copy reloc only if
there is non-GOT reference.
* elflink.c (_bfd_elf_link_check_relocs): Skip non-loaded,
non-alloced sections.
ld/
PR ld/26080
* testsuite/ld-elf/comm-data.exp: Remove copy_reloc.
* testsuite/ld-elf/comm-data2r.rd: Removed.
* testsuite/ld-elf/comm-data2r.sd: Likewise.
* testsuite/ld-elf/comm-data2r.xd: Likewise.
When binutils is compiled with -fsanitize=undefined, many tests with
linker, instead of $CC, fail with undefined symbol references to sanitize
library. Define NOSANTIZE_CFLAGS to -fno-sanitize=all if target compiler
supports it and compile such tests with $NOSANTIZE_CFLAGS.
* testsuite/config/default.exp (NOSANTIZE_CFLAGS): New.
* testsuite/ld-elf/linux-x86.exp: Add $NOSANTIZE_CFLAGS to
tests with run_ld_link_exec_tests.
* testsuite/ld-elf/shared.exp: Add $NOSANTIZE_CFLAGS to tests
with run_ld_link_tests.
* testsuite/ld-elf/tls.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Add $NOSANTIZE_CFLAGS to
tests with ld_link.
* testsuite/ld-gc/gc.exp: Add $NOSANTIZE_CFLAGS to cflags.
* testsuite/ld-plugin/lto.exp: Add $NOSANTIZE_CFLAGS to tests
with run_ld_link_tests.a
* testsuite/ld-plugin/plugin.exp: Append $NOSANTIZE_CFLAGS to
CFLAGS.
* testsuite/ld-selective/selective.exp: Add $NOSANTIZE_CFLAGS
to cflags and cxxflags.
* testsuite/ld-srec/srec.exp: Append $NOSANTIZE_CFLAGS to CC
and CXX.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Updated for
-fsanitize=undefined.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Add $NOSANTIZE_CFLAGS to
tests with run_cc_link_tests and run_ld_link_tests.
--export-dynamic-symbol-list is like a dynamic list, but without
the symbolic property for unspecified symbols.
When creating an executable, --export-dynamic-symbol-list is treated
like --dynamic-list.
When creating a shared library, it is treated like --dynamic-list if
-Bsymbolic or --dynamic-list are used, otherwise, it is ignored, so
that references to matched symbols will not be bound to the definitions
within the shared library.
PR ld/25910
* NEWS: Mention --export-dynamic-symbol[-list].
* ld.texi: Document --export-dynamic-symbol[-list].
* ldgram.y: Pass current_dynamic_list_p to
lang_append_dynamic_list.
* ldlang.c (current_dynamic_list_p): New.
(ang_append_dynamic_list): Updated to take a pointer to
struct bfd_elf_dynamic_list * argument instead of using
link_info.dynamic_list.
(lang_append_dynamic_list_cpp_typeinfo): Pass
&link_info.dynamic_list to ang_append_dynamic_list.
(lang_append_dynamic_list_cpp_new): Likewise.
* ldlang.h (current_dynamic_list_p): New.
(lang_append_dynamic_list): Add a pointer to
struct bfd_elf_dynamic_list * argument.
* ldlex.h (option_values): Add OPTION_EXPORT_DYNAMIC_SYMBOL and
OPTION_EXPORT_DYNAMIC_SYMBOL_LIST.
* lexsup.c (ld_options): Add entries for
OPTION_EXPORT_DYNAMIC_SYMBOL and
OPTION_EXPORT_DYNAMIC_SYMBOL_LIST.
(parse_args): Handle --export-dynamic-symbol and
--export-dynamic-symbol-list.
* testsuite/ld-dynamic/export-dynamic-symbol-1.d: New.
* testsuite/ld-dynamic/export-dynamic-symbol-2.d: New.
* testsuite/ld-dynamic/export-dynamic-symbol-glob.d: New.
* testsuite/ld-dynamic/export-dynamic-symbol-list-1.d: New.
* testsuite/ld-dynamic/export-dynamic-symbol-list-2.d: New.
* testsuite/ld-dynamic/export-dynamic-symbol-list-glob.d: New.
* testsuite/ld-dynamic/export-dynamic-symbol.exp: New.
* testsuite/ld-dynamic/export-dynamic-symbol.s: New.
* testsuite/ld-dynamic/foo-bar.list: New.
* testsuite/ld-dynamic/foo.list: New.
* testsuite/ld-dynamic/foo.s: New.
* testsuite/ld-dynamic/fstar.list: New.
* testsuite/ld-elf/dlempty.list: New.
* testsuite/ld-elf/shared.exp: Add tests for
--export-dynamic-symbol and --export-dynamic-symbol-list.
Noticed by my autotester covering cris-axis-linux-gnu:
...
Running <x>/src/ld/testsuite/ld-elf/elf.exp ...
XPASS: ld-elf/pr19539
...
This was apparently as intended, so I'm just adjusting the xfail.
PR ld/22909
* testsuite/ld-elf/pr19539.d: Don't xfail for cris*-*-*.
* lexsup.c (parse_args): If the map filename is defined but empty
create a name based upon the output file name. If the name is
defined but refers to a directory create a file inside the
directory based on the output file name.
* ld.texi: Document the new feature.
* testsuite/ld-script/map-address.exp: Add test of new feature.
* NEWS: Mention the new feature.
--dynamic-list* should work both before and after -Bsymbolic and
-Bsymbolic-functions.
PR ld/26018
* lexsup.c (parse_args): Simplify.
* testsuite/ld-elf/dl4e.out: New.
* testsuite/ld-elf/shared.exp: Updated for PR ld/26018 tests.
1. Remove the -mriscv-isa-version and --with-riscv-isa-version options.
We can still use -march to choose the version for each extensions, so there is
no need to add these.
2. Change the arguments of options from [1p9|1p9p1|...] to [1.9|1.9.1|...].
Unlike the architecture string has specified by spec, ther is no need to do
the same thing for options.
3. Spilt the patches to reduce the burdens of review.
[PATCH 3/7] RISC-V: Support new GAS options and configure options to set ISA versions
to
[PATCH v2 3/9] RISC-V: Support GAS option -misa-spec to set ISA versions
[PATCH v2 4/9] RISC-V: Support configure options to set ISA versions by default.
[PATCH 4/7] RISC-V: Support version checking for CSR according to privilege version.
to
[PATCH v2 5/9] RISC-V: Support version checking for CSR according to privilege spec version.
[PATCH v2 6/9] RISC-V: Support configure option to choose the privilege spec version.
4. Use enum class rather than string to compare the choosen ISA spec in opcodes/riscv-opc.c.
The behavior is same as comparing the choosen privilege spec.
include * opcode/riscv.h: Include "bfd.h" to support bfd_boolean.
(enum riscv_isa_spec_class): New enum class. All supported ISA spec
belong to one of the class
(struct riscv_ext_version): New structure holds version information
for the specific ISA.
* opcode/riscv-opc.h (DECLARE_CSR): There are two version information,
define_version and abort_version. The define_version means which
privilege spec is started to define the CSR, and the abort_version
means which privilege spec is started to abort the CSR. If the CSR is
valid for the newest spec, then the abort_version should be
PRIV_SPEC_CLASS_DRAFT.
(DECLARE_CSR_ALIAS): Same as DECLARE_CSR, but only for the obselete CSR.
* opcode/riscv.h (enum riscv_priv_spec_class): New enum class. Define
the current supported privilege spec versions.
(struct riscv_csr_extra): Add new fields to store more information
about the CSR. We use these information to find the suitable CSR
address when user choosing a specific privilege spec.
binutils * dwarf.c: Updated since DECLARE_CSR is changed.
opcodes * riscv-opc.c (riscv_ext_version_table): The table used to store
all information about the supported spec and the corresponding ISA
versions. Currently, only Zicsr is supported to verify the
correctness of Z sub extension settings. Others will be supported
in the future patches.
(struct isa_spec_t, isa_specs): List for all supported ISA spec
classes and the corresponding strings.
(riscv_get_isa_spec_class): New function. Get the corresponding ISA
spec class by giving a ISA spec string.
* riscv-opc.c (struct priv_spec_t): New structure.
(struct priv_spec_t priv_specs): List for all supported privilege spec
classes and the corresponding strings.
(riscv_get_priv_spec_class): New function. Get the corresponding
privilege spec class by giving a spec string.
(riscv_get_priv_spec_name): New function. Get the corresponding
privilege spec string by giving a CSR version class.
* riscv-dis.c: Updated since DECLARE_CSR is changed.
* riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR
according to the chosen version. Build a hash table riscv_csr_hash to
store the valid CSR for the chosen pirv verison. Dump the direct
CSR address rather than it's name if it is invalid.
(parse_riscv_dis_option_without_args): New function. Parse the options
without arguments.
(parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to
parse the options without arguments first, and then handle the options
with arguments. Add the new option -Mpriv-spec, which has argument.
* riscv-dis.c (print_riscv_disassembler_options): Add description
about the new OBJDUMP option.
ld * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated
priv attributes according to the -mpriv-spec option.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise.
bfd * elfxx-riscv.h (riscv_parse_subset_t): Add new callback function
get_default_version. It is used to find the default version for
the specific extension.
* elfxx-riscv.c (riscv_parsing_subset_version): Remove the parameters
default_major_version and default_minor_version. Add new bfd_boolean
parameter *use_default_version. Set it to TRUE if we need to call
the callback rps->get_default_version to find the default version.
(riscv_parse_std_ext): Call rps->get_default_version if we fail to find
the default version in riscv_parsing_subset_version, and then call
riscv_add_subset to add the subset into subset list.
(riscv_parse_prefixed_ext): Likewise.
(riscv_std_z_ext_strtab): Support Zicsr extensions.
* elfnn-riscv.c (riscv_merge_std_ext): Use strcasecmp to compare the
strings rather than characters.
riscv_merge_arch_attr_info): The callback function get_default_version
is only needed for assembler, so set it to NULL int the linker.
* elfxx-riscv.c (riscv_estimate_digit): Remove the static.
* elfxx-riscv.h: Updated.
gas * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated.
* config/tc-riscv.c (default_arch_with_ext, default_isa_spec):
Static variables which are used to set the ISA extensions. You can
use -march (or ELF build attributes) and -misa-spec to set them,
respectively.
(ext_version_hash): The hash table used to handle the extensions
with versions.
(init_ext_version_hash): Initialize the ext_version_hash according
to riscv_ext_version_table.
(riscv_get_default_ext_version): The callback function of
riscv_parse_subset_t. According to the choosed ISA spec,
get the default version for the specific extension.
(riscv_set_arch): Set the callback function.
(enum options, struct option md_longopts): Add new option -misa-spec.
(md_parse_option): Do not call riscv_set_arch for -march. We will
call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class
to set default_isa_spec class.
(riscv_after_parse_args): Call init_ext_version_hash to initialize the
ext_version_hash, and then call riscv_set_arch to set the architecture
with versions according to default_arch_with_ext.
* testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for
x extensions.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we
already set it's version to 2p1 by march, so no need to use the default
2p2 version. For m-ext, we do not set the version by -march and ELF arch
attribute, so set the default 2p0 to it. For zicsr, it is not defined in
ISA spec 2p2, so set 0p0 to it.
* testsuite/gas/riscv/attribute-10.d: New testcase. The version of
zicsr is 2p0 according to ISA spec 20191213.
* config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT)
(DEFAULT_RISCV_ISA_SPEC): Default configure option settings.
You can set them by configure options --with-arch and
--with-isa-spec, respectively.
(riscv_set_default_isa_spec): New function used to set the
default ISA spec.
(md_parse_option): Call riscv_set_default_isa_spec rather than
call riscv_get_isa_spec_class directly.
(riscv_after_parse_args): If the -isa-spec is not set, then we
set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by
calling riscv_set_default_isa_spec.
* testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since
the --with-isa-spec may be set to different ISA spec.
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* configure.ac: Add configure options, --with-arch and
--with-isa-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (default_priv_spec): Static variable which is
used to check if the CSR is valid for the chosen privilege spec. You
can use -mpriv-spec to set it.
(enum reg_class): We now get the CSR address from csr_extra_hash rather
than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX.
(riscv_init_csr_hashes): Only need to initialize one hash table
csr_extra_hash.
(riscv_csr_class_check): Change the return type to void. Don't check
the ISA dependency if -mcsr-check isn't set.
(riscv_csr_version_check): New function. Check and find the CSR address
from csr_extra_hash, according to default_priv_spec. Report warning
for the invalid CSR if -mcsr-check is set.
(reg_csr_lookup_internal): Updated.
(reg_lookup_internal): Likewise.
(md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed.
(enum options, struct option md_longopts): Add new GAS option -mpriv-spec.
(md_parse_option): Call riscv_set_default_priv_version to set
default_priv_spec.
(riscv_after_parse_args): If -mpriv-spec isn't set, then set the default
privilege spec to the newest one.
(enum riscv_csr_class, struct riscv_csr_extra): Move them to
include/opcode/riscv.h.
* testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want
to check the ISA dependency for CSR, so fix the spec version by adding
-mpriv-spec=1.11.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some
version warnings for the test case.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case.
Check whether the CSR is valid when privilege version 1.9 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case.
Check whether the CSR is valid when privilege version 1.9.1 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case.
Check whether the CSR is valid when privilege version 1.10 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case.
Check whether the CSR is valid when privilege version 1.11 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option
setting. You can set it by configure option --with-priv-spec.
(riscv_set_default_priv_spec): New function used to set the default
privilege spec.
(md_parse_option): Call riscv_set_default_priv_spec rather than
call riscv_get_priv_spec_class directly.
(riscv_after_parse_args): If -mpriv-spec isn't set, then we set the
default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by
calling riscv_set_default_priv_spec.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since
the --with-priv-spec may be set to different privilege spec.
* testsuite/gas/riscv/priv-reg.d: Likewise.
* configure.ac: Add configure option --with-priv-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to
explicit_attr. Set it to TRUE if any ELF attribute is found.
(riscv_set_default_priv_spec): Try to set the default_priv_spec if
the priv attributes are set.
(md_assemble): Set the default_priv_spec according to the priv
attributes when we start to assemble instruction.
(riscv_write_out_attrs): Rename riscv_write_out_arch_attr to
riscv_write_out_attrs. Update the arch and priv attributes. If we
don't set the corresponding ELF attributes, then try to output the
default ones.
(riscv_set_public_attributes): If any ELF attribute or -march-attr
options is set (explicit_attr is TRUE), then call riscv_write_out_attrs
to update the arch and priv attributes.
(s_riscv_attribute): Make sure all arch and priv attributes are set
before any instruction.
* testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any
ELF attribute or -march-attr is set. If the priv attributes are not
set, then try to update them by the default setting (-mpriv-spec or
--with-priv-spec).
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: Likewise.
* testsuite/gas/riscv/attribute-10.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec
set by priv attributes must be supported.
* testsuite/gas/riscv/attribute-05.s: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated
priv attributes according to the -mpriv-spec option.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg.d: Removed.
* testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the
CSR according to the priv spec 1.9.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the
CSR according to the priv spec 1.9.1.
* testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the
CSR according to the priv spec 1.10.
* testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the
CSR according to the priv spec 1.11.
* config/tc-riscv.c (md_show_usage): Add descriptions about
the new GAS options.
* doc/c-riscv.texi: Likewise.
The linker silently writes out a conditional branch to 0 if the
target symbol in R_AARCH64_CONDBR19 or R_AARCH64_TSTBR14 relocations is
undefined. Emit a PLT instead so that behaviour is the same for these
relocations as the llvm linker.
The special behaviour for undefined weak symbols, where conditional
branches to such symbols result in a branch unto themselves, has been
retained. This is because the weak-undefined.s test explicitly checks
for that, leading me to conclude that it's expected behaviour.
bfd * elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Club
BFD_RELOC_AARCH64_BRANCH19 and BFD_RELOC_AARCH64_TSTBR14
cases with BFD_RELOC_AARCH64_JUMP26.
(elfNN_aarch64_check_relocs): Likewise.
ld * testsuite/ld-aarch64/aarch64-elf.exp: New test
emit-relocs-560.
* testsuite/ld-aarch64/emit-relocs-560.d: New file.
* testsuite/ld-aarch64/emit-relocs-560.s: New file.
Now that ISA3.1 is out we can finish with the powerxx silliness.
bfd/
* elf64-ppc.c: Rename powerxx to power10 throughout.
gas/
* config/tc-ppc.c (md_assemble): Update for PPC_OPCODE_POWER10
renaming.
* testsuite/gas/ppc/prefix-align.d: Use -mpower10/-Mpower10 in
place of -mfuture/-Mfuture.
* testsuite/gas/ppc/prefix-pcrel.d: Likewise.
* testsuite/gas/ppc/prefix-reloc.d: Likewise.
gold/
* powerpc.cc: Rename powerxx to power10 throughout.
include/
* elf/ppc64.h: Update comment.
* opcode/ppc.h (PPC_OPCODE_POWER10): Rename from PPC_OPCODE_POWERXX.
ld/
* testsuite/ld-powerpc/callstub-1.d: Use -mpower10/-Mpower10 in
place of -mfuture/-Mfuture.
* testsuite/ld-powerpc/notoc2.d: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Likewise.
* testsuite/ld-powerpc/tlsgd.d: Likewise.
* testsuite/ld-powerpc/tlsie.d: Likewise.
* testsuite/ld-powerpc/tlsld.d: Likewise.
opcodes/
* ppc-dis.c (ppc_opts): Add "power10" entry.
(print_insn_powerpc): Update for PPC_OPCODE_POWER10 renaming.
* ppc-opc.c (POWER10): Rename from POWERXX. Update all uses.
PR ld/25665
* bfd/elfnn-aarch64.c (group_sections): Copy implementation
from elf32-arm.c.
* testsuite/ld-aarch64/aarch64-elf.exp: Add new test.
* testsuite/ld-aarch64/farcall-group.s: New large group test.
* testsuite/ld-aarch64/farcall-group.d: Likewise.
Fields marked with XTENSA_NDIFF relocations are not negated, they only
have sign bits removed. Don't negate their values when relaxation is
performed. Don't add sign bits when the value is zero. Report overflow
when the result has negative sign but all significant bits are zero.
2020-04-29 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (relax_section): Don't negate diff_value for
XTENSA_NDIFF relocations. Don't add sign bits whe diff_value
equals 0. Report overflow when the result has negative sign but
all significant bits are zero.
ld/
* testsuite/ld-xtensa/relax-diff1.d: New test definition.
* testsuite/ld-xtensa/relax-diff1.s: New test source.
* testsuite/ld-xtensa/relax-ndiff.d: New test definition.
* testsuite/ld-xtensa/relax-ndiff.s: New test source.
* testsuite/ld-xtensa/xtensa.exp: (relax-diff1)
(relax-ndiff): New tests.
Introduce new relaxations XTENSA_PDIFF{8,16,32} for positive differences
(subtracted symbol precedes diminished symbol) and XTENSA_NDIFF{8,16,32}
for negative differences (subtracted symbol follows diminished symbol).
Don't generate XTENSA_DIFF relocations in the assembler, generate
XTENSA_PDIFF or XTENSA_NDIFF based on relative symbol position.
Handle XTENSA_DIFF in BFD for compatibility with old object files.
Handle XTENSA_PDIFF and XTENSA_NDIFF in BFD, treating difference value
as unsigned.
2020-04-22 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* bfd-in2.h: Regenerated.
* elf32-xtensa.c (elf_howto_table): New entries for
R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}.
(elf_xtensa_reloc_type_lookup, elf_xtensa_do_reloc)
(relax_section): Add cases for R_XTENSA_PDIFF{8,16,32} and
R_XTENSA_NDIFF{8,16,32}.
* libbfd.h (bfd_reloc_code_real_names): Add names for
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32}.
* reloc.c: Add documentation for BFD_RELOC_XTENSA_PDIFF{8,16,32}
and BFD_RELOC_XTENSA_NDIFF{8,16,32}.
binutils/
* readelf.c (is_none_reloc): Recognize
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32}.
gas/
* config/tc-xtensa.c (md_apply_fix): Replace
BFD_RELOC_XTENSA_DIFF{8,16,32} generation with
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32} generation.
* testsuite/gas/xtensa/loc.d: Replace BFD_RELOC_XTENSA_DIFF16
with BFD_RELOC_XTENSA_PDIFF16 in the expected output.
include/
* elf/xtensa.h (elf_xtensa_reloc_type): New entries for
R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}.
ld/
* testsuite/ld-xtensa/relax-loc.d: New test definition.
* testsuite/ld-xtensa/relax-loc.s: New test source.
* testsuite/ld-xtensa/xtensa.exp (relax-loc): New test.
ELF size_dynamic_sections is called by the ELF backend linker after all
the linker input files have been seen but before the section sizes have
been set. After the sections sizes have been set, target-specific,
global optimizations may make some dynamic sections zero-sized if they
are no longer needed.
Add ELF strip_zero_sized_dynamic_sections so that ELF backend linker can
strip zero-sized dynamic sections after the sections sizes have been set.
bfd/
PR ld/25849
* elf-bfd.h (elf_backend_data): Add
elf_backend_strip_zero_sized_dynamic_sections.
(_bfd_elf_strip_zero_sized_dynamic_sections): New prototype.
* elf64-alpha.c (elf_backend_strip_zero_sized_dynamic_sections):
New macro.
* elflink.c (_bfd_elf_strip_zero_sized_dynamic_sections): New
function.
* elfxx-target.h (elf_backend_strip_zero_sized_dynamic_sections):
New macro.
(elfNN_bed): Add elf_backend_strip_zero_sized_dynamic_sections.
ld/
PR ld/25849
* ldelfgen.c (ldelf_map_segments): Call
elf_backend_strip_zero_sized_dynamic_sections.
* testsuite/ld-alpha/tlsbinr.rd: Updated.
Stripping .rela.branch_lt is easy enough but messes with the
testsuite due to stub symbols (that use section id) changing. Tests
that run on more than one target variant can be tricky to fix, this
renaming happened to work.
bfd/
* elf64-ppc.c (ppc64_elf_size_stubs): Strip relbrlt too.
ld/
* testsuite/ld-powerpc/tlsopt5.s: Rename foo to aaaaa.
* testsuite/ld-powerpc/tlsopt5.d: Adjust to suit.
* testsuite/ld-powerpc/tlsopt6.d: Likewise.
Two ld tests currently XPASS on 64-bit Solaris/SPARC:
XPASS: ld-elf/warn1
XPASS: ld-elf/warn2
They were xfail'ed on Solaris/SPARCv9 back in 2005
https://sourceware.org/pipermail/binutils/2005-February/039268.html
but obviously this no longer appplies.
Fixed by removing the xfail's.
Tested on sparcv9-sun-solaris2.11 and sparc-sun-solaris2.11.
* testsuite/ld-elf/warn1.d: Don't xfail on 64-bit Solaris/SPARC.
* testsuite/ld-elf/warn2.d: Likewise.
Since the .set directive of ELF/alpha target is different, define NO_SET
to 1 to use "=" for ELF/alpha target.
* testsuite/ld-elf/elf.exp (ASFLAGS): Add "--defsym NO_SET=1" for
alpha target.
* testsuite/ld-elf/pr19789.s: Use "=" if NO_SET is defined.
* testsuite/config/default.exp: If not already set then create the
CCC_OVERRIDE_OPTIONS environment variable to help when running the
testsuite with clang.
* testsuite/ld-elf/pr22269-1.c: Add a missing return statement.
* testsuite/ld-elfvers/vers.exp: Add checks to detect if files
were built before attempting to copy them.
PR ld/18963
* testsuite/ld-scripts/pr18963.s: New, replaces empty data.s to
allocate space in text, data, bss here rather than pr18963.t.
* testsuite/ld-scripts/pr18963.t: Remove assignments to dot.
* testsuite/ld-scripts/pr18963.d: Change addresses to fit 16 bits.
When reconstructing dynamic symbol table from the PT_DYNAMIC segment,
compute dynamic symbol table size from hash table. For DT_HASH, the
number of dynamic symbol table entries equals the number of chains.
For DT_GNU_HASH/DT_MIPS_XHASH, only defined symbols with non-STB_LOCAL
indings are in hash table. Since DT_GNU_HASH/DT_MIPS_XHASH place all
symbols with STB_LOCAL binding before symbols with other bindings and
all undefined symbols defined ones in dynamic symbol table, the highest
symbol index in DT_GNU_HASH/DT_MIPS_XHASH is the highest dynamic symbol
table index.
Rewrite print_dynamic_symbol to dump dynamic symbol table for --dyn-syms
and --syms --use-dynamic.
binutils/
PR binutils/25707
* readelf.c (nbuckets): New.
(nchains): Likewise.
(buckets): Likewise.
(chains): Likewise.
(ngnubuckets): Likewise.
(gnubuckets): Likewise.
(gnuchains): Likewise.
(mipsxlat): Likewise.
(ngnuchains): Likewise.
(gnusymidx): Likewise.
(VALID_SYMBOL_NAME): Likewise.
(VALID_DYNAMIC_NAME): Use it.
(get_dynamic_data): Moved before process_dynamic_section.
(get_num_dynamic_syms): New function.
(process_dynamic_section): Use DT_SYMTAB, DT_SYMENT, DT_HASH,
DT_GNU_HASH and DT_MIPS_XHASH to reconstruct dynamic symbol
table. Use DT_STRTAB and DT_STRSZ to reconstruct dynamic string
table.
(get_symbol_index_type): Don't print "bad section index" when
there is no section header.
(print_dynamic_symbol): Rewrite.
(process_symbol_table): Call print_dynamic_symbol to dump dynamic
symbol table.
ld/
PR binutils/25707
* testsuite/ld-arm/armthumb-lib.sym: Updated.
* testsuite/ld-arm/farcall-mixed-app.sym: Likewise.
* testsuite/ld-arm/farcall-mixed-app2.sym: Likewise.
* testsuite/ld-arm/fdpic-main-m.sym: Likewise.
* testsuite/ld-arm/fdpic-main.sym: Likewise.
* testsuite/ld-arm/fdpic-shared-m.sym: Likewise.
* testsuite/ld-arm/fdpic-shared.sym: Likewise.
* testsuite/ld-arm/mixed-app.sym: Likewise.
* testsuite/ld-arm/mixed-lib.sym: Likewise.
* testsuite/ld-arm/preempt-app.sym: Likewise.
* testsuite/ld-elf/hash.d: Likewise.
* testsuite/ld-elf/pr13195.d: Likewise.
* testsuite/ld-elfvsb/hidden2.d: Likewise.
* testsuite/ld-mips-elf/hash2.d: Likewise.
Three ld tests currently FAIL on Solaris/SPARC:
FAIL: shared (non PIC)
FAIL: shared (non PIC, load offset)
FAIL: shared (PIC main, non PIC so)
all of them in the same way:
/var/gcc/binutils/sparcv7/obj/binutils/ld/tmpdir/ld/collect-ld: read-only
segment has dynamic relocations
Given that Solaris defaults to -z text, this is to be expected, thus
this patch xfail's them.
Tested on sparc-sun-solaris2.11 and sparcv9-sun-solaris2.11.
* testsuite/ld-shared/shared.exp: Remove dangling comments.
xfail shared non PIC tests on Solaris.
pr22269-1.s currently FAILs to assemble on 32-bit Solaris/SPARC:
ERROR: -K PIC tmpdir/pr22269-1.s: assembly failed
UNRESOLVED: pr22269-1 (static pie undefined weak)
tmpdir/pr22269-1.s: Assembler messages:
tmpdir/pr22269-1.s:27: Error: Architecture mismatch on "be,pn %icc,.LL4 ,pn %icc,.LL4".
tmpdir/pr22269-1.s:27: (Requires v9|v9a|v9b|v9c|v9d|v9e|v9v|v9m|m8; requested architecture is sparclite.)
tmpdir/pr22269-1.s:32: Error: Architecture mismatch on "return %i7+8".
tmpdir/pr22269-1.s:32: (Requires v9|v9a|v9b|v9c|v9d|v9e|v9v|v9m|m8; requested architecture is sparclite.)
tmpdir/pr22269-1.s:36: Error: Architecture mismatch on "return %i7+8".
tmpdir/pr22269-1.s:36: (Requires v9|v9a|v9b|v9c|v9d|v9e|v9v|v9m|m8; requested architecture is sparclite.)
I could trace this to the fact that gcc on sparc-sun-solaris2.* defaults
to --with-cpu=v9. So the gcc -S step of compiling the testcase is run
with -mcpu=v9, while the manual invocation of as-new lacks the
corresponding -Av9, creating a mismatch.
Solaris seems to be the only affected target, otherwise only
64-bit-default configurations default to --with-cpu=v9 or
--with-cpu=ultrasparc: sparcv9-*-*, sparc64-*-*,
sparc64-*-freebsd*, ultrasparc-*-freebsd*, and sparc64-*-openbsd*.
This patch just adds -Av9 to AFLAGS_PIC in ld-elf/shared.exp. It has a
precedent in ld-elfvers/vers.exp where -Av9a is added to as_options on
sparc-*-*. It lets the test pass and causes no other changes in
sparc-sun-solaris2.11 test results.
* testsuite/ld-elf/shared.exp: Add -Av9 to AFLAGS_PIC on sparc*-*-*.
GCC in Ubuntu 20.04 enables -fcf-protection by default, which leads to
FAIL: S-records
FAIL: S-records with constructors
FAIL: Build plt-main with -z bndplt
FAIL: Build plt-main with PIE and -z bndplt
FAIL: Build plt-main with -z bndplt -z now
FAIL: Build plt-main with PIE and -z bndplt -z now
on x86-64. Add NOCF_PROTECTION_CFLAGS to pass -fcf-protection=none on
these tests.
* testsuite/config/default.exp (NOCF_PROTECTION_CFLAGS): New.
Set to "-fcf-protection=none" if target compiler supports it.
* testsuite/ld-srec/srec.exp: Add $NOCF_PROTECTION_CFLAGS to
CC and CXX.
* testsuite/ld-x86-64/x86-64.exp: Add $NOCF_PROTECTION_CFLAGS
to PLT BND tests.
Compile with -I../bfd to include <bfd_stdint.h> in PR ld/25749 tests.
* testsuite/ld-elf/linux-x86.exp (check_pr25749a): Compile with
-I../bfd.
(check_pr25749b): Likewise.
