(load_address, macro): Use load_delay_nop() to build a nop
which can be omitted with gpr_interlocks.
* gas/mips/lb-xgot-ilocks.d: Remove nops in load delay slot.
* gas/mips/mips-abi32-pic.d: Likewise.
* gas/mips/mips-abi32-pic2.d: Likewise.
* gas/mips/mips-gp32-fp32-pic.d: Likewise.
* gas/mips/mips-gp32-fp64-pic.d: Likewise.
* gas/mips/mips-gp64-fp32-pic.d: Likewise.
* gas/mips/mips-gp64-fp64-pic.d: Likewise.
* gas/mips/relax-swap1-mips2.d: Likewise.
* gas/mips/lb-svr4pic-ilocks.d: New test.
* gas/mips/mips.exp: Run it.
2004-04-20 Chris Demetriou <cgd@broadcom.com>
* NEWS: Note that MIPS -membedded-pic option is deprecated.
[ ld/ChangeLog ]
2004-04-20 Chris Demetriou <cgd@broadcom.com>
* NEWS: Note that MIPS --embedded-relocs option is deprecated.
* elf32-xtensa.c (elf_xtensa_check_relocs): Remove code to read
literal tables and check for relocs outside of literal pools.
(elf_xtensa_make_sym_local): Don't clear ELF_LINK_NON_GOT_REF flag.
(elf_xtensa_fix_refcounts): Don't check ELF_LINK_NON_GOT_REF or
set DF_TEXTREL.
(elf_xtensa_size_dynamic_sections): Don't add DT_TEXTREL entry.
(elf_xtensa_relocate_section): Read literal tables and check for
dynamic relocations in read-only sections and not in literal pools.
gas/ChangeLog:
* config/tc-xtensa.c (xtensa_post_relax_hook): Create literal
tables even when use_literal_section flag is not set.
--mul-bug-abort and the default behavior.
* config/tc-cris.c (cris_insn_kind): New member CRIS_INSN_MUL.
(err_for_dangerous_mul_placement): New variable.
(STATE_MUL, OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): New
macros.
(md_cris_relax_table): Have placeholder for STATE_MUL.
(md_longopts): New options --mul-bug-abort and --no-mul-bug-abort.
(cris_relax_frag) <case ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: New
case doing nothing.
(md_estimate_size_before_relax) <case ENCODE_RELAX (STATE_MUL,
STATE_BYTE)>: Ditto.
(md_convert_frag) <ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: Check
alignment and position of this frag, emit error message if
suspicious.
(md_assemble): For a multiply insn and when checking it,
transform the current frag into a special frag for that purpose.
(md_parse_option) <case OPTION_MULBUG_ABORT_OFF, case
OPTION_MULBUG_ABORT_ON>: Handle new options.
(xtensa_move_literals): Call mark_literal_frags for all literal
segments, including init and fini literal segments.
(xtensa_post_relax_hook): Swap use of xt_insn_sec and xt_literal_sec.
R_PARISC_PCREL32 and R_PARISC_PCREL64 relocations.
* tc-hppa.c (cons_fix_new_hppa): Check for PC relative base type.
(pa_comm): Set BSF_OBJECT in symbol flags.
(M, Mp): Use OP_M.
(None, PADLOCK_SPECIAL, PADLOCK_0): Delete.
(GRPPADLCK): Define.
(dis386): Use NOP_Fixup on "nop".
(dis386_twobyte): Use GRPPADLCK on opcode 0xa7.
(twobyte_has_modrm): Set for 0xa7.
(padlock_table): Delete. Move to..
(grps): ..here, using OP_0f07. Use OP_Ofae on lfence, mfence
and clflush.
(print_insn): Revert PADLOCK_SPECIAL code.
(OP_E): Delete sfence, lfence, mfence checks.
* gas/i386/katmai.d: Revert last change.
* i386-dis.c (grps): Use clflush by default for 0x0fae/7.
(OP_E): Twiddle clflush to sfence here.
gas/testsuite/
* gas/i386/katmai.d: Adjust for clflush change.
* config/tc-ia64.c (dot_align): New.
(ia64_do_align): Make it static.
(md_pseudo_table): Use "dot_align" for "align".
(ia64_md_do_align): Don't set align_frag here.
(ia64_handle_align): Add a stop bit to the previous bundle if
needed.
* config/tc-ia64.h (ia64_do_align): Removed.
opcodes:
* sh-dis.c (print_insn_sh): Don't disassemble fp instructions in
nofpu mode. Add BFD type bfd_mach_sh4_nommu_nofpu.
* sh-opc.h: Add sh4_nommu_nofpu architecture and adjust instructions
accordingly.
bfd:
* archures.c: Add bfd_mach_sh4_nommu_nofpu.
* cpu-sh.c: Ditto.
* elf32-sh.c: Ditto.
* bfd-in2.h: Regenerate.
include/elf:
* sh.h: Add EF_SH4_NOMMU_NOFPU.
gas:
* config/tc-sh.c (md_parse_option): Add -isa=sh4-nofpu and
-isa=sh4-nommu-nofpu options. Adjust help messages accordingly.
(sh_elf_final_processing): Output BFD type sh4_nofpu if that is
the most general type or the user specifically requested it.
(md_assemble): Add a new error message for when an instruction
is understood, but is not allowed due to an -isa option.
* config/tc-ia64.c (align_frag): New.
(md_assemble): Set the tc_frag_data field in align_frag for
IA64_OPCODE_FIRST instructions.
(ia64_md_do_align): Set align_frag.
(ia64_handle_align): Add a stop bit if needed.
* config/tc-ia64.h (TC_FRAG_TYPE): New.
(TC_FRAG_INIT): New.
gas:
* tc-sh.c (build_Mytes): Add REG_N_D and REG_N_B01
nibble types to assembler.
opcodes:
* sh-dis.c (print_insn_sh): Add REG_N_D nibble type to
ensure that double registers have even numbers.
Add REG_N_B01 for nn01 (binary 01) nibble to ensure
that reserved instruction 0xfffd does not decode the same
as 0xfdfd (ftrv).
* sh-opc.h: Add REG_N_D nibble type and use it whereever
REG_N refers to a double register.
Add REG_N_B01 nibble type and use it instead of REG_NM
in ftrv.
Adjust the bit patterns in a few comments.
* dwarf2dbg.c (DWARF2_ADDR_SIZE): Remove trailing ';'
* read.h (SKIP_WHITESPACE): Turn into an expression.
* read.c (read_a_source_file): A pseudo is removed by having a
NULL handler.
testsuite:
* gas/macros/test2.s: Lowercase it.
* config/tc-ia64.c (output_endp): New.
(count_bits): Delete.
(ia64_flush_insns, process_one_record, optimize_unw_records): Handle
endp unwind records.
(fixup_unw_records): Handle endp unwind records. Delete code for
shortening prologue regions not followed by a body record.
(dot_endp): Call add_unwind_entry to emit endp unwind record.
* config/tc-ia64.h (unw_record_type): Add endp.
* config/tc-ia64.c (ia64_convert_frag): Call md_number_to_chars to
fill padding bytes with zeroes.
(emit_one_bundle): New locals last_ptr, end_ptr. Rewrite code that
sets unwind_record slot_number and slot_frag fields.
* config/tc-mips.c (hilo_interlocks): Change definition
so that MIPS32, MIPS64 and later ISAs are included, along with
the already-included machines. Update comments.
* gas/mips/relax-swap1.s: Add extra space at end, so the
disassembly will consistently have "..." at its end.
* gas/mips/relax-swap2.s: Likewise.
* gas/mips/relax-swap1-mips2.d: Expect "..." at end of disassembly.
(RELAX_FIRST, RELAX_SECOND): Turn into 8-bit quantities.
(RELAX_USE_SECOND): Bump to 0x10000.
(RELAX_SECOND_LONGER, RELAX_NOMACRO, RELAX_DELAY_SLOT): New flags.
(mips_macro_warning): New variable.
(md_assemble): Wrap macro expansion in macro_start() and macro_end().
(s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Likewise.
(relax_close_frag): Set mips_macro_warning.first_frag. Adjust use
of RELAX_ENCODE.
(append_insn): Update mips_macro_warning.sizes.
(macro_start, macro_warning, macro_end): New functions.
(macro_build): Don't emit warnings here.
(macro_build_lui, md_estimate_size_before_relax): ...or here.
(md_convert_frag): Check for cases where one macro alternative
needs a warning and the other doesn't. Emit a warning if the
longer sequence was chosen.
* config/tc-mips.c (RELAX_ENCODE): Take three arguments: the size of
the first sequence, the size of the second sequence, and a flag
that says whether we should warn.
(RELAX_OLD, RELAX_NEW, RELAX_RELOC[123]): Delete.
(RELAX_FIRST, RELAX_SECOND): New.
(mips_relax): New variable.
(relax_close_frag, relax_start, relax_switch, relax_end): New fns.
(append_insn): Remove "place" argument. Use mips_relax.sequence
rather than "place" to check whether we're expanding the second
alternative of a relaxable macro. Remove redundant check for
branch relaxation. If generating a normal insn, and there
is not enough room in the current frag, call relax_close_frag()
to close it. Update mips_relax.sizes[]. Emit fixups for the
second version of a relaxable macro. Record the first relaxable
fixup in mips_relax. Remove tc_gen_reloc workaround.
(macro_build): Remove all uses of "place". Use mips_relax.sequence
in the same way as in append_insn.
(mips16_macro_build): Remove "place" argument.
(macro_build_lui): As for macro_build. Don't drop the add_symbol
when generating the second version of a relaxable macro.
(load_got_offset, add_got_offset): New functions.
(load_address, macro): Use new relaxation machinery. Remove
tc_gen_reloc workarounds.
(md_estimate_size_before_relax): Set RELAX_USE_SECOND if the second
version of a relaxable macro is needed. Return -RELAX_SECOND if the
first version is needed.
(tc_gen_reloc): Remove relaxation handling.
(md_convert_frag): Go through the fixups for a relaxable macro and
mark those that belong to the unneeded alternative as done. If the
second alternative is needed, adjust the fixup addresses to account
for the deleted first alternative.
testsuite/
* gas/mips/elf-rel19.[sd]: New test.
* gas/mips/mips.exp: Run it.
Thiemo Seufer
Paul Brook
Nick Clifton
Chris Demetriou
Eric Christopher
Jakub Jelinek
Nathan Sidwell
Alan Modra
H.J. Lu
Richard Sandiford
Bob Wilson
Kaz Kojima
Stan Shebs
Andreas Schwab
Hans-Peter Nilsson
Dave Anglin
Michal Ludvig
Andreas Jaeger
Richard Henderson
Joern Rennecke
Martin Schwidefsky
Fred Fish
Jim Wilson
Daniel Jacobowitz
Maciej W. Rozycki