2005-09-28 Jan Beulich <jbeulich@novell.com>
* gas/i386/x86-64-stack.s, gas/i386/x86-64-stack.d,
gas/i386/x86-64-stack-suffix.d, gas/i386/x86-64-stack-intel.d: New.
* gas/i386/i386.exp: Run new tests.
ld/testsuite/
2005-09-28 Jan Beulich <jbeulich@novell.com>
* ld-x86-64/tlspic.dd: Adjust.
opcodes/
2005-09-28 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (stack_v_mode): Renamed from branch_v_mode.
(indirEv): Use it.
(stackEv): New.
(Ob64, Ov64): Rename to Ob, Ov. Delete unused original definitions.
(dis386): Document and use new 'V' meta character. Use it for
single-byte push/pop opcode forms. Use stackEv for mod-r/m push/pop
opcode forms. Correct typo in 'pop ss'. Replace Ob64/Ov64 by Ob/Ov.
(putop): 'q' suffix for 'T' and 'U' meta depends on DFLAG. Mark
data prefix as used whenever DFLAG was examined. Handle 'V'.
(intel_operand_size): Use stack_v_mode.
(OP_E): Use stack_v_mode, but handle only the special case of
64-bit mode without operand size override here; fall through to
v_mode case otherwise.
(OP_REG): Special case rAX_reg ... rDI_reg only when 64-bit mode
and no operand size override is present.
(OP_J): Use get32s for obtaining the displacement also when rex64
is present.
(mips_builtin_opcodes): Move "bc0f", "bc0fl", "bc0t", "bc0tl" to the
bottom to avoid opcode collision with "mftr" and "mttr".
Add MT instructions.
* mips-dis.c (mips_arch_choices): Enable INSN_MT for mips32r2.
(print_insn_args): Add supports for +t, +T, !, $, *, &, g operand
formats.
bfd/
* libbdf.h: Regenerate.
* bfd-in2.h: Regenerate.
* reloc.c: Add BFD_RELOC_ARM_T32_CP_OFF_IMM and
BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.
gas/
* config/tc-arm.c (encode_arm_cp_address): Use
BFD_RELOC_ARM_T32_CP_OFF_IMM in thumb mode.
(do_iwmmxt_wldstbh): Use BFD_RELOC_ARM_T32_CP_OFF_IMM_S2 in thumb
mode.
(md_assemble): Only allow coprocessor instructions when Thumb-2 is
available.
(cCE, cC3): Define.
(insns): Use them for coprocessor instructions.
(md_pcrel_from_section): Handle BFD_RELOC_ARM_T32_CP_OFF_IMM.
(get_thumb32_insn): New function.
(put_thumb32_insn): New function.
(md_apply_fix): Handle BFD_RELOC_ARM_T32_CP_OFF_IMM and
BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.
gas/testsuite/
* gas/arm/vfp-bad_t2.d, gas/arm/vfp-bad_t2.l, arm/vfp-bad_t2.s,
gas/arm/vfp1_t2.d, gas/arm/vfp1_t2.s, gas/arm/vfp1xD_t2.d,
gas/arm/vfp1xD_t2.s, gas/arm/vfp2_t2.d, gas/arm/vfp2_t2.s): New files.
opcodes/
* arm-dis.c (coprocessor_opcodes): New.
(arm_opcodes, thumb32_opcodes): Remove coprocessor insns.
(print_insn_coprocessor): New function.
(print_insn_arm): Use print_insn_coprocessor. Remove coprocessor
format characters.
(print_insn_thumb32): Use print_insn_coprocessor.
2005-08-26 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (intel_operand_size): New, broken out from OP_E for
re-use.
(OP_E): Call intel_operand_size, move call site out of mode
dependent code.
(OP_OFF): Call intel_operand_size if suffix_always. Remove
ATTRIBUTE_UNUSED from parameters.
(OP_OFF64): Likewise.
(OP_ESreg): Call intel_operand_size.
(OP_DSreg): Likewise.
(OP_DIR): Use colon rather than semicolon as separator of far
jump/call operands.
gas/testsuite/
2005-08-26 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.d: Adjust.
* s390-mkopc.c (s390_opcode_cpu_val): Add support for cpu type z9-109.
(main): Likewise.
* s390-opc.c (I32_16, U32_16, M_16): Add defines 32 bit immediates
and 4 bit optional masks.
(INSTR_RIL_RI, INSTR_RIL_RU, INSTR_RRF_M0RR, INSTR_RSE_CCRD,
INSTR_RSY_CCRD, INSTR_SSF_RRDRD): Add new instruction formats.
(MASK_RIL_RI, MASK_RIL_RU, MASK_RRF_M0RR, MASK_RSE_CCRD,
MASK_RSY_CCRD, MASK_SSF_RRDRD): Likewise.
(s390_opformats): Likewise.
* s390-opc.txt: Add new instructions for cpu type z9-109.
2005-07-14 Jim Blandy <jimb@redhat.com>
* configure.in: Add cases for Renesas m32c.
* configure: Regenerated.
bfd/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for m32c-*-elf (Renesas m32c and m16c).
* Makefile.am (ALL_MACHINES): Add cpu-m32c.lo.
(ALL_MACHINES_CFILES): Add cpu-m32c.c.
(BFD32_BACKENDS): Add elf32-m32c.lo.
(BFD32_BACKENDS_CFILES): Add elf32-m32c.c.
(cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'.
* Makefile.in: Regenerated.
* archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New
arch and mach codes.
(bfd_m32c_arch): New arch info object.
(bfd_archures_list): List bfd_m32c_arch.
* bfd-in2.h: Regenerated.
* config.bfd: Add case for the m32c.
* configure.in: Add case for the m32c.
* configure: Regenerated.
* cpu-m32c.c, elf32-m32c.c: New files.
* libbfd.h: Regenerated.
* targets.c (bfd_elf32_m32c_vec): Declare.
(_bfd_target_vector): List bfd_elf32_m32c_vec.
binutils/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* readelf.c: #include "elf/m32c.h"
(guess_is_rela, dump_relocations, get_machine_name): Add cases for
EM_M32C.
* Makefile.am (readelf.o): Update dependencies.
* Makefile.in: Regenerated.
cpu/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* m32c.cpu, m32c.opc: Machine description for the Renesas M32C.
gas/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C.
* Makefile.am (CPU_TYPES): List m32c.
(TARGET_CPU_CFILES): List config/tc-m32c.c.
(TARGET_CPU_HFILES): List config/tc-m32c.h.
* configure.in: Add case for m32c.
* configure.tgt: Add cases for m32c and m32c-*-elf.
* configure: Regenerated.
* config/tc-m32c.c, config/tc-m32c.h: New files.
* doc/Makefile.am (CPU_DOCS): Add c-m32c.texi.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set M32C.
* doc/as.texinfo: Add text for the M32C-specific options and line
comment characters, and refer to c-m32c.texi.
* doc/c-m32c.texi: New file.
include/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* dis-asm.h (print_insn_m32c): New declaration.
include/elf/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for Renesas M32C and M16C.
* common.h (EM_M32C): New machine number.
* m32c.h: New file.
ld/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o.
(eelf32m32c.c): New target.
* Makefile.in: Regenerated.
* configure.tgt: Add case for m32c-*-elf.
* emulparams/elf32m32c.sh: New file.
opcodes/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New.
* m32c-desc.h, m32c-opc.h: New.
* Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h.
(CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c,
m32c-opc.c.
(ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo,
m32c-ibld.lo, m32c-opc.lo.
(CLEANFILES): List stamp-m32c.
(M32C_DEPS): List stamp-m32c, if CGEN_MAINT.
(CGEN_CPUS): Add m32c.
(m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c)
(m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS.
(m32c_opc_h): New variable.
(stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo)
(m32c-opc.lo): New rules.
* Makefile.in: Regenerated.
* configure.in: Add case for bfd_m32c_arch.
* configure: Regenerated.
* disassemble.c (ARCH_m32c): New.
[ARCH_m32c]: #include "m32c-desc.h".
(disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c.
(disassemble_init_for_target) [ARCH_m32c]: Same.
* cgen-ops.h, cgen-types.h: New files.
* Makefile.am (HFILES): List them.
* Makefile.in: Regenerated.
2005-07-05 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.h (CpuSVME): New.
(CpuUnknownFlags): Include CpuSVME.
* config/tc-i386.c (cpu_arch): Add .pacifica and .svme. Add opteron
as alias of sledgehammer.
(md_assemble): Include invlpga in the check for insns with two source
operands.
(process_operands): Include SVME insns in the check for ignored
segment overrides. Adjust diagnostic.
(i386_index_check): Special-case SVME insns with memory operands.
gas/testsuite/
2005-07-05 Jan Beulich <jbeulich@novell.com>
* gas/i386/svme.d: New.
* gas/i386/svme.s: New.
* gas/i386/svme64.d: New.
* gas/i386/i386.exp: Run new tests.
include/opcode/
2005-07-05 Jan Beulich <jbeulich@novell.com>
* i386.h (i386_optab): Add new insns.
opcodes/
2005-07-05 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (SVME_Fixup): New.
(grps): Use it for the lidt entry.
(PNI_Fixup): Call OP_M rather than OP_E.
(INVLPG_Fixup): Likewise.
* arm-opc.h: Delete; fold contents into ...
* arm-dis.c: ... here. Move includes of internal COFF headers
next to includes of internal ELF headers.
(streq, WORD_ADDRESS, BDISP, BDISP23): Delete, unused.
(struct arm_opcode): Rename struct opcode32. Make 'assembler' const.
(struct thumb_opcode): Rename struct opcode16. Make 'assembler' const.
(arm_conditional, arm_fp_const, arm_shift, arm_regname, regnames)
(iwmmxt_wwnames, iwmmxt_wwssnames):
Make const.
(regnames): Remove iWMMXt coprocessor register sets.
(iwmmxt_regnames, iwmmxt_cregnames): New statics.
(get_arm_regnames): Adjust fourth argument to match above changes.
(set_iwmmxt_regnames): Delete.
(print_insn_arm): Constify 'c'. Use ISO syntax for function
pointer calls. Expand sole use of BDISP. Use iwmmxt_regnames
and iwmmxt_cregnames, not set_iwmmxt_regnames.
(print_insn_thumb16, print_insn_thumb32): Constify 'c'. Use
ISO syntax for function pointer calls.
include:
* dis-asm.h (get_arm_regnames): Update prototype.
that the ARM and 16-bit Thumb opcode tables each have comments
preceding them that describe all the codes, and only the codes,
valid in those tables. (32-bit Thumb table is already like this.)
Reorder the lists in all three comments to match the order in
which the codes are implemented.
Remove all forward declarations of static functions. Convert all
function definitions to ISO C format.
(print_insn_arm, print_insn_thumb16, print_insn_thumb32):
Return nothing.
(print_insn_thumb16): Remove unused case 'I'.
(print_insn): Update for changed calling convention of subroutines.
2005-05-25 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.d: Account for 32-bit displacements being shown
in hex.
opcodes/
2005-05-25 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (OP_E): In Intel mode, display 32-bit displacements in
hex (but retain it being displayed as signed). Remove redundant
checks. Add handling of displacements for 16-bit addressing in Intel
mode.
* arm.h: Import complete list of official relocation names
and numbers from AAELF. Define FAKE_RELOCs for old names.
Remove a few old names no longer used anywhere.
bfd:
* elf32-arm.c: Wherever possible, use official reloc names
from AAELF.
(elf32_arm_howto_table, elf32_arm_tls_gd32_howto)
(elf32_arm_tls_ldo32_howto, elf32_arm_tls_ldm32_howto)
(elf32_arm_tls_le32_howto, elf32_arm_tls_ie32_howto)
(elf32_arm_vtinherit_howto, elf32_arm_vtentry_howto)
(elf32_arm_pc11_howto, elf32_arm_thm_pc9_howto, elf32_arm_got_prel)
(elf32_arm_r_howto): Replace with elf32_arm_howto_table_1,
elf32_arm_howto_table_2, and elf32_arm_howto_table_3.
Add many new relocations from AAELF.
(elf32_arm_howto_from_type): Update to match.
(elf32_arm_reloc_map): Add entries for R_ARM_THM_JUMP24,
R_ARM_THM_JUMP11, R_ARM_THM_JUMP19, R_ARM_THM_JUMP8,
R_ARM_THM_JUMP6, R_ARM_GNU_VTINHERIT, and R_ARM_GNU_VTENTRY.
(elf32_arm_reloc_type_lookup): Use elf32_arm_howto_from_type.
(elf32_arm_final_link_relocate): Add support for
R_ARM_THM_JUMP24, R_ARM_THM_JUMP19, R_ARM_THM_JUMP6. Remove
case entries redundant with default.
* reloc.c: Reorganize ARM relocations. Add Thumb
assembler-internal relocations BFD_RELOC_ARM_T32_OFFSET_U8,
BFD_RELOC_ARM_T32_OFFSET_IMM, BFD_RELOC_ARM_T32_IMMEDIATE.
Add visible relocations BFD_RELOC_THUMB_PCREL_BRANCH7,
BFD_RELOC_THUMB_BRANCH20, BFD_RELOC_THUMB_BRANCH25.
Delete unused relocations BFD_RELOC_ARM_GOT12, BFD_RELOC_ARM_COPY.
* bfd-in2.h, libbfd.h: Regenerate.
opcodes:
* arm-dis.c (thumb_opcodes): Add disassembly for V6T2 16-bit
instructions. Adjust disassembly of some opcodes to match
unified syntax.
(thumb32_opcodes): New table.
(print_insn_thumb): Rename print_insn_thumb16; don't handle
two-halfword branches here.
(print_insn_thumb32): New function.
(print_insn): Choose among print_insn_arm, print_insn_thumb16,
and print_insn_thumb32. Be consistent about order of
halfwords when printing 32-bit instructions.
gas:
* hash.c (hash_lookup): Add len parameter. All callers changed.
(hash_find_n): New interface.
* hash.h: Prototype hash_find_n.
* sb.c: Include as.h.
(scrub_from_sb, sb_to_scrub, scrub_position): New statics.
(sb_scrub_and_add_sb): New interface.
* sb.h: Prototype sb_scrub_and_add_sb.
* input-scrub.c (input_scrub_include_sb): Use sb_scrub_and_add_sb.
* config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Remove
reference to BFD_RELOC_ARM_GOT12 which is never generated.
* config/tc-arm.c: Rewrite, adding Thumb-2 support.
gas/testsuite:
* gas/arm/arm.exp: Convert all existing "gas_test" tests to
"run_dump_test" tests. Run more tests unconditionally. Run new tests.
* gas/arm/arch4t.s, gas/arm/arch6zk.s, gas/arm/arm3.s, gas/arm/arm6.s
* gas/arm/arm7dm.s, gas/arm/bignum1.s, gas/arm/float.s
* gas/arm/immed.s, gas/arm/iwmmxt.s, gas/arm/offset.s, gas/arm/thumb.s:
Adjust to work as a dump test.
* gas/arm/arch4t.d, gas/arm/arch6zk.d, gas/arm/arm3.d, gas/arm/arm6.d
* gas/arm/arm7dm.d, gas/arm/bignum1.d, gas/arm/float.d
* gas/arm/immed.d, gas/arm/iwmmxt.d, gas/arm/offset.d, gas/arm/thumb.d:
New files.
* gas/arm/armv1-bad.l, gas/arm/armv1-bad.s: Remove tests for
diagnostics that don't happen in the first pass anymore.
* gas/arm/iwmmxt-bad.l, gas/arm/r15-bad.l, gas/arm/req.l
* gas/arm/vfp-bad.l:
Update expected diagnostics.
* gas/arm/pic.d: Update expected reloc name.
* gas/arm/thumbv6.d: CPY no longer appears in disassembly.
* gas/arm/r15-bad.s: Avoid two-argument mul.
* gas/arm/req.s: Adjust comments.
* gas/arm/maverick.d, gas/arm/maverick.s: Avoid inappropriate
use of PC.
* gas/arm/macro-1.d, gas/arm/macro1.s
* gas/arm/t16-bad.l, gas/arm/t16-bad.s
* gas/arm/tcompat.d, gas/arm/tcompat.s
* gas/arm/tcompat2.d, gas/arm/tcompat2.s
* gas/arm/thumb32.d, gas/arm/thumb32.s
New test pair.
ld/testsuite:
* ld-arm/mixed-app.d: Adjust expected disassembly a little.
Nick Clifton
H.J. Lu
Catherine Moore
Jan Beulich
Paul Brook
Chao-ying Fu
David Ung
Alan Modra
Daniel Jacobowitz
Dave Anglin
Martin Schwidefsky
DJ Delorie
Jim Blandy
Jim Wilson
Ben Elliston
Dave Brolley
Zack Weinberg
Kelley Cook