include:
* dis-asm.h (print_insn_shl, print_insn_sh64l): Remove prototype.
gdb:
* sh-tdep.c (gdb_print_insn_sh64): Delete.
(gdb_print_insn_sh): Just set info->endian and use print_insn_sh.
(sh_gdbarch_init): Always use gdb_print_insn_sh.
opcodes:
* disassemble.c (disassembler): Just use print_insn_sh for bfd_arch_sh.
* sh-dis.c (LITTLE_BIT): Delete.
(print_insn_sh, print_insn_shl): Deleted.
(print_insn_shx): Renamed to
(print_insn_sh). No longer static. Handle SHmedia instructions.
Use info->endian to determine endianness.
* sh64-dis.c (print_insn_sh64, print_insn_sh64l): Delete.
(print_insn_sh64x): No longer static. Renamed to
(print_insn_sh64). Removed pfun_compact and endian arguments.
If we got an uneven address to indicate SHmedia, adjust it.
Return -2 for SHcompact instructions.
sim/sh64:
* sim-if.c (sh64_disassemble_insn): Use print_insn_sh instead of
print_insn_shl.
2002-05-01 Graydon Hoare <graydon@redhat.com>
* desc-cpu.scm (@arch@_cgen_cpu_close): Fix memory leaks.
[ opcodes/ChangeLog ]
2002-05-07 Graydon Hoare <graydon@redhat.com>
* cgen-dis.in: (print_insn_@arch@): Cache list of opened CPUs rather
than just most-recently-opened.
a crash of the assembler with some malformed source input.
Long segmented addresses are now correctly relocated.
Finally it updates my email address in the MAINTAINERS file.
* mips-opc.c (M3D): Tweak comment.
(mips_builtin_op): Add comment indicating that opcodes of the
same name must be placed together in the table, and sort
the "recip.fmt", "recip1.fmt", "recip2.fmt", "rsqrt.fmt",
"rsqrt1.fmt", and "rsqrt2.fmt" opcodes by name.
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* config/tc-mips.c (mips_set_options): New "ase_mips3d" member.
(mips_opts): Initialize "ase_mips3d" member.
(file_ase_mips3d): New variable.
(CPU_HAS_MIPS3D): New macro.
(md_begin): Initialize mips_opts.ase_mips3d and file_ase_mips3d
based on command line options and configuration defaults.
(macro_build, mips_ip): Accept MIPS-3D instructions if
mips_opts.ase_mips3d is set.
(OPTION_MIPS3D, OPTION_NO_MIPS3D, md_longopts, md_parse_option):
Add support for "-mips3d" and "-no-mips3d" options.
(OPTION_ELF_BASE): Move to accomodate new options.
(s_mipsset): Support ".set mips3d" and ".set nomips3d".
(mips_elf_final_processing): Add a comment indicating that a
MIPS-3D ASE ELF header flag should be set, when one exists.
* doc/as.texinfo: Document -mips3d and -no-mips3d options.
* doc/c-mips.texi: Likewise, and document ".set mips3d" and ".set
nomips3d" directives.
[ gas/testsuite/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* gas/mips/mips64-mips3d.s: New file.
* gas/mips/mips64-mips3d.d: Likewise.
* gas/mips/mips.exp: Run new "mips64-mips3d" test.
[ include/opcode/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* mips.h (INSN_MIPS3D): New definition used to mark MIPS-3D
instructions.
(OPCODE_IS_MEMBER): Adjust comments to indicate that ASE bit masks
may be passed along with the ISA bitmask.
[ opcodes/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_isa_type): Add MIPS3D instructions to the ISA
bit masks for bfd_mach_mips_sb1 and bfd_mach_mipsisa64. Add
comments for bfd_mach_mipsisa32 and bfd_mach_mipsisa64 that
indicate that they should dissassemble all applicable
MIPS-specified ASEs.
* mips-opc.c: Add support for MIPS-3D instructions.
(M3D): New definition.
* mips-opc.c: Update copyright years.
for float opcodes that take float operands. Add alternate
names (xxxD vs. xxxF) for float opcodes.
* pdp11-dis.c (print_operand): Clean up formatting for mode 67.
(print_foperand): New function to handle float opcode operands.
(print_insn_pdp11): Use print_foperand to disassemble float ops.
* ppc-opc.c (insert_bdm): Correct description of "at" branch
hints. Test PPC_OPCODE_POWER4 to determine branch hint flavour.
(extract_bdm, insert_bdp, extract_bdp, valid_bo): Likewise.
(BOFM64, BOFP64, BOTM64, BOFP64): Rename to BOFM4, BOFP4 etc.
(BODNZM64, BODNZP64, BODZM64, BODZP64): Likewise.
(PPCCOM32, PPCCOM64): Delete.
(NOPOWER4, POWER4): Define.
(powerpc_opcodes): Replace occurences of PPCCOM32 with NOPOWER4,
and PPCCOM4 with POWER4 so that "at" style branch hint opcodes
are enabled for power4 rather than ppc64.
2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
* sh64-opc.c: Regenerate.
2001-03-13 DJ Delorie <dj@redhat.com>
* sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
purpose is more obvious.
* sh64-opc.c (shmedia_table): Ditto.
* sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
(print_insn_shmedia): Ditto.
2001-03-12 DJ Delorie <dj@redhat.com>
* sh64-opc.c: Adjust comments to reflect reality: replace bits
3:0 with zeros (not "reserved"), replace "rrrrrr" with
"gggggg" for two-operand floating point opcodes. Remove
"fsina".
2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
Correct printing of .byte:s. Return number of printed bytes or
-1; never 0.
(print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
to next four-byte-alignment if insn or data is not aligned.
2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c: Update comments and fix comment formatting.
(initialize_shmedia_opcode_mask_table) <case A_IMMM>:
Abort instead of setting length to 0.
(crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
crange_bsearch_cmpl, sh64_get_contents_type,
sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.c: Remove #if 0:d entries for instructions not found in
SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
address with same prefix as SHcompact.
In the disassembler, use a .cranges section for linked executables.
* sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
and update for using structure in info->private_data.
(struct sh64_disassemble_info): New.
(is_shmedia_p): Delete.
(crange_qsort_cmpb): New function.
(crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
(crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
(init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
(sh64_get_contents_type, sh64_address_is_shmedia): New functions.
(print_insn_shmedia): Correct displaying of address after MOVI/SHORI
pair. Display addresses for linked executables only.
(print_insn_sh64x_media): Initialize info->private_data by calling
init_sh64_disasm_info.
(print_insn_sh64x): Ditto. Find out type of contents by calling
sh64_contents_type_disasm. Display data regions using ".long" and
".byte" similar to unrecognized opcodes.
2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
information in section flags before considering symbols. Don't
assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
* configure.in (bfd_sh_arch): Check presence of sh64 insns by
matching $target $canon_targets instead of looking at the
now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
* configure: Regenerate.
2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.c (shmedia_creg_table): New.
* sh64-opc.h (shmedia_creg_info): New type.
(shmedia_creg_table): Declare.
* sh64-dis.c (creg_name): New function.
(print_insn_shmedia): Use it.
* disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
bfd_mach_sh5 to print_insn_sh64 if big-endian and to
print_insn_sh64l if little-endian.
* sh64-dis.c (print_insn_shmedia): Make r unsigned.
(print_insn_sh64l): New.
(print_insn_sh64x): New.
(print_insn_sh64x_media): New.
(print_insn_sh64): Break out code to print_insn_sh64x and
print_insn_sh64x_media.
2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.h: New file
* sh64-opc.c: New file
* sh64-dis.c: New file
* Makefile.am: Add sh64 targets.
(HFILES): Add sh64-opc.h.
(CFILES): Add sh64-opc.c and sh64-dis.c.
(ALL_MACHINES): Add sh64 files.
* Makefile.in: Regenerate.
* configure.in: Add support for sh64 to bfd_sh_arch.
* configure: Regenerate.
* disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
(disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
print_insn_sh64.
* sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.
[includes]
2002-02-04 Frank Ch. Eigler <fche@redhat.com>
* dis-asm.h (disassemble_info): New field `insn_sets'.
(INIT_DISASSEMBLE_INFO): Clear it.
[opcodes]
2002-02-04 Frank Ch. Eigler <fche@redhat.com>
* cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
Joern Rennecke