bfd/
* archures.c (bfd_mach_avr25, bfd_mach_avr31, bfd_mach_avr35,
bfd_mach_avr51): New.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): Add avr25, avr31, avr35, and avr51
architectures. Change comments to match architecture comments in GCC.
(compatible): Add test for new AVR architectures.
* elf32-avr.c (bfd_elf_avr_final_write_processing): Recognize
bfd_mach_avr25, bfd_mach_avr31, bfd_mach_avr35 and bfd_mach_avr51.
(elf32_avr_object_p): Recognize E_AVR_MACH_AVR25, E_AVR_MACH_AVR31,
E_AVR_MACH_AVR35 and E_AVR_MACH_AVR51.
gas/
* config/tc-avr.c (mcu_types): Add avr25, avr31, avr35, and avr51
architectures. Reorganize list to put mcu types in correct architectures
and to order list same as in GCC. Use new ISA definitions in
include/opcode/avr.h.
* doc/c-avr.texi: Add avr25, avr31, avr35, and avr51 architecture
descriptions. Reorganize descriptions to put mcu types in correct
architectures and to order lists same as in GCC.
include/
* elf/avr.h (E_AVR_MACH_AVR25, E_AVR_MACH_AVR31,
E_AVR_MACH_AVR35, E_AVR_MACH_AVR51): Define.
(EF_AVR_MACH): Redefine to 0x7F.
* opcode/avr.h (AVR_ISA_TINY3, AVR_ISA_ALL, AVR_ISA_USB162): Remove.
(AVR_ISA_AVR3): Redefine.
(AVR_ISA_AVR1, AVR_ISA_AVR2, AVR_ISA_AVR31, AVR_ISA_AVR35,
AVR_ISA_AVR3_ALL, AVR_ISA_AVR4, AVR_ISA_AVR5, AVR_ISA_AVR51,
AVR_ISA_AVR6): Define.
ld/
* Makefile.am (ALL_EMULATIONS): Add eavr25.o, eavr31.o, eavr35.o,
and eavr51.o.
Add rules for eavr25.c, eavr31.c, eavr35.c, eavr51.c.
* Makefile.in: Regenerate.
* configure.tgt (avr-*-*, targ_extra_emuls): Add avr25, avr31, avr35
and avr51.
* emulparams/avr25.sh: New file.
* emulparams/avr31.sh: New file.
* emulparams/avr35.sh: New file.
* emulparams/avr51.sh: New file.
2006-08-02 Richard Sandiford <richard@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
* config.bfd (sh-*-vxworks): Use bfd_elf32_shvxworks_vec and
bfd_elf32_shlvxworks_vec.
* configure.in (bfd_elf32_sh64_vec): Add elf-vxworks.lo.
(bfd_elf32_sh64l_vec, bfd_elf32_sh64lin_vec): Likewise.
(bfd_elf32_sh64blin_vec, bfd_elf32_sh64lnbsd_vec): Likewise.
(bfd_elf32_sh64nbsd_vec, bfd_elf32_sh_vec): Likewise.
(bfd_elf32_shblin_vec, bfd_elf32_shl_vec): Likewise.
(bfd_elf32_shl_symbian_vec, bfd_elf32_shlin_vec): Likewise.
(bfd_elf32_shlnbsd_vec, bfd_elf32_shnbsd_vec): Likewise.
(bfd_elf32_shlvxworks_vec, bfd_elf32_shvxworks_vec): New stanzas.
* configure: Regenerate.
* Makefile.am: Regenerate dependencies.
* Makefile.in: Regenerate.
* elf-vxworks.c (elf_vxworks_gott_symbol_p): New function.
(elf_vxworks_add_symbol_hook): Use it.
(elf_vxworks_link_output_symbol_hook): Likewise. Use the hash
table entry to check for weak undefined symbols and to obtain
the original bfd.
(elf_vxworks_emit_relocs): Use target_index instead of this_idx.
* elf32-sh-relocs.h: New file, split from elf32-sh.c.
(R_SH_DIR32): Use SH_PARTIAL32 for the partial_inplace field,
SH_SRC_MASK32 for the src_mask field, and SH_ELF_RELOC for the
special_function field.
(R_SH_REL32): Use SH_PARTIAL32 and SH_SRC_MASK32 here too.
(R_SH_REL32, R_SH_TLS_GD_32, R_SH_TLS_LD_32): Likewise.
(R_SH_TLS_LDO_32, R_SH_TLS_IE_32, R_SH_TLS_LE_32): Likewise.
(R_SH_TLS_DTPMOD32, R_SH_TLS_DTPOFF32, R_SH_TLS_TPOFF32): Likewise.
(R_SH_GOT32, R_SH_PLT32, R_SH_COPY, R_SH_GLOB_DAT): Likewise.
(R_SH_JMP_SLOT, R_SH_RELATIVE, R_SH_GOTOFF, R_SH_GOTPC): Likewise.
(SH_PARTIAL32, SH_SRC_MASK32, SH_ELF_RELOC): Undefine at end of file.
* elf32-sh.c: Include elf32-vxworks.h.
(MINUS_ONE): Define.
(sh_elf_howto_table): Include elf32-sh-relocs.h with SH_PARTIAL32
set to TRUE, SH_SRC_MASK32 set to 0xffffffff, and SH_ELF_RELOC set
to sh_elf_reloc.
(sh_vxworks_howto_table): New variable. Include elf32-sh-relocs.h
with SH_PARTIAL32 set to FALSE, SH_SRC_MASK32 set to 0, and
SH_ELF_RELOC set to bfd_elf_generic_reloc.
(vxworks_object_p, get_howto_table): New functions.
(sh_elf_reloc_type_lookup): Fix typo. Use get_howto_table.
(sh_elf_info_to_howto): Use get_howto_table.
(sh_elf_relax_section): Honor the partial_inplace field of the
R_SH_DIR32 howto.
(sh_elf_relax_delete_bytes): Likewise.
(elf_sh_plt_info): New structure.
(PLT_ENTRY_SIZE): Replace both definitions with...
(ELF_PLT_ENTRY_SIZE): ...this new macro, with separate definitions for
INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_entry_be): Update sizes of both definitions accordingly.
(elf_sh_plt0_entry_le): Likewise.
(elf_sh_plt_entry_be, elf_sh_plt_entry_le): Likewise.
(elf_sh_pic_plt_entry_be, elf_sh_pic_plt_entry_le): Likewise.
(elf_sh_plts): New structure, with separate definitions for
INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_entry): Delete both definitions.
(elf_sh_plt_entry, elf_sh_pic_plt_entry): Likewise.
(elf_sh_sizeof_plt, elf_sh_plt_plt0_offset): Likewise.
(elf_sh_plt_temp_offset, elf_sh_plt_symbol_offset): Likewise.
(elf_sh_plt_reloc_offset): Likewise.
(movi_shori_putval): Delete in favor of...
(install_plt_field): ...this new function, with separate definitions
for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(get_plt_info): New function, with separate definitions
for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_linker_offset, elf_sh_plt0_gotid_offset): Delete.
(VXWORKS_PLT_HEADER_SIZE, VXWORKS_PLT_ENTRY_SIZE): New macros.
(vxworks_sh_plt0_entry_be, vxworks_sh_plt0_entry_le): New constants.
(vxworks_sh_plt_entry_be, vxworks_sh_plt_entry_le): Likewise.
(vxworks_sh_pic_plt_entry_be, vxworks_sh_pic_plt_entry_le): Likewise.
(get_plt_index, get_plt_offset): New functions.
(elf_sh_link_hash_table): Add srelplt2, plt_info and vxworks_p fields.
(sh_elf_link_hash_table_create): Initialize them.
(sh_elf_create_dynamic_sections): Call
elf_vxworks_create_dynamic_sections for VxWorks.
(allocate_dynrelocs): Use htab->plt_info to get the size of PLT
entries. Allocate relocation entries in .rela.plt.unloaded if
generating a VxWorks executable.
(sh_elf_always_size_sections): New function.
(sh_elf_size_dynamic_sections): Extend .rela.plt handling to
.rela.plt.unloaded.
(sh_elf_relocate_section): Use get_howto_table. Honor
partial_inplace when calculating the addend for dynamic
relocations. Use get_plt_index.
(sh_elf_finish_dynamic_symbol): Use get_plt_index, install_plt_field
and htab->plt_info. Fill in the bra .plt offset for VxWorks
executables. Populate .rela.plt.unloaded. Do not make
_GLOBAL_OFFSET_TABLE_ absolute on VxWorks.
(sh_elf_finish_dynamic_sections): Use install_plt_field and
htab->plt_info. Handle cases where there is no special PLT header.
Populate the first relocation in .rela.plt.unloaded and fix up
the remaining entries.
(sh_elf_plt_sym_val): Use get_plt_info.
(elf_backend_always_size_sections): Define.
(TARGET_BIG_SYM, TARGET_BIG_NAME): Override for VxWorks.
(TARGET_LITTLE_SYM, TARGET_BIG_SYM): Likewise.
(elf32_bed, elf_backend_want_plt_sym): Likewise.
(elf_symbol_leading_char, elf_backend_want_got_underscore): Likewise.
(elf_backend_grok_prstatus, elf_backend_grok_psinfo): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing): Likewise.
(ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): Likewise.
* targets.c (bfd_elf32_shlvxworks_vec): Declare.
(bfd_elf32_shvxworks_vec): Likewise.
(_bfd_target_vector): Include bfd_elf32_shlvxworks_vec and
bfd_elf32_shvxworks_vec.
gas/
* config/tc-sh.c (apply_full_field_fix): New function.
(md_apply_fix): Use it instead of md_number_to_chars. Do not fill
in fx_addnumber for BFD_RELOC_32_PLT_PCREL.
(tc_gen_reloc): Use fx_addnumber rather than 0 as the default case.
* config/tc-sh.h (TARGET_FORMAT): Override for TE_VXWORKS.
ld/
2006-08-02 Richard Sandiford <richard@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* Makefile.am (ALL_EMULATIONS): Add eshelf_vxworks.o and
eshlelf_vxworks.o.
(eshelf_vxworks.c, eshlelf_vxworks.c): New rules.
* Makefile.in: Regenerate.
* configure.tgt (sh-*-vxworks): Use shelf_vxworks and
shlelf_vxworks.
* emulparams/shelf_vxworks.sh: New file.
* emulparams/shlelf_vxworks.sh: Likewise.
* emulparams/vxworks.sh (FINI): Prefix _etext with ${SYMPREFIX}.
(OTHER_END_SYMBOLS): Likewise _ehdr.
(DATA_END_SYMBOLS): Likewise _edata.
* emultempl/vxworks.em (vxworks_after_open): Check whether output_bfd
is indeed an ELF file before dealing with --force-dynamic.
ld/testsuite/
* ld-sh/rd-sh.exp: Treat vxworks1-static.d specially.
* ld-sh/sh-vxworks.exp: New file.
* ld-sh/sh.exp: Extend sh-linux SIZEOF_HEADERS handling to
sh-*-vxworks.
* ld-sh/vxworks1-le.dd, ld-sh/vxworks1-lib-le.dd,
* ld-sh/vxworks1-lib.dd, ld-sh/vxworks1-lib.nd,
* ld-sh/vxworks1-lib.rd, ld-sh/vxworks1-lib.s,
* ld-sh/vxworks1-static.d, ld-sh/vxworks1.dd,
* ld-sh/vxworks1.ld, ld-sh/vxworks1.rd, ld-sh/vxworks1.s,
* ld-sh/vxworks2-static.sd, ld-sh/vxworks2.s,
* ld-sh/vxworks2.sd, ld-sh/vxworks3-le.dd,
* ld-sh/vxworks3-lib-le.dd, ld-sh/vxworks3-lib.dd,
* ld-sh/vxworks3-lib.s, ld-sh/vxworks3.dd, ld-sh/vxworks3.s,
* ld-sh/vxworks4.d, ld-sh/vxworks4a.s, ld-sh/vxworks4b.s,
* ld-sh/reloc1.s, ld-sh/reloc1.d: New tests.
Daniel Jacobowitz <dan@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Zack Weinberg <zack@codesourcery.com>
Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
bfd/
* bfd-in2.h: Regenerate.
* config.bfd (mips*-*-vxworks*, mips*el-*-vxworks*): New stanzas.
* configure.in (bfd_elf32_bigmips_vxworks_vec): New stanza.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(bfd_elf32_bigmips_vec): Add elf-vxworks.lo.
(bfd_elf32_littlemips_vec): Likewise.
(bfd_elf32_nbigmips_vec): Likewise.
(bfd_elf32_nlittlemips_vec): Likewise.
(bfd_elf32_ntradbigmips_vec): Likewise.
(bfd_elf32_ntradlittlemips_vec): Likewise.
(bfd_elf32_tradbigmips_vec): Likewise.
(bfd_elf32_tradlittlemips_vec): Likewise.
(bfd_elf64_bigmips_vec): Likewise.
(bfd_elf64_littlemips_vec): Likewise.
(bfd_elf64_tradbigmips_vec): Likewise.
(bfd_elf64_tradlittlemips_vec): Likewise.
* elf32-mips.c: Include elf-vxworks.h.
(mips_info_to_howto_rel): Use elf_backend_mips_rtype_to_howto
instead of calling mips_elf32_rtype_to_howto directly.
(mips_vxworks_copy_howto_rela): New reloc howto.
(mips_vxworks_jump_slot_howto_rela): Likewise.
(mips_vxworks_bfd_reloc_type_lookup): New function.
(mips_vxworks_rtype_to_howto): Likewise.
(mips_vxworks_final_write_processing): Likewise.
(TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Override for VxWorks.
(TARGET_BIG_SYM, TARGET_BIG_NAME, elf_bed, ELF_MAXPAGESIZE): Likewise.
(elf_backend_want_got_plt): Likewise.
(elf_backend_want_plt_sym): Likewise.
(elf_backend_got_symbol_offset): Likewise.
(elf_backend_want_dynbss): Likewise.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_got_header_size: Likewise.
(elf_backend_plt_readonly): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Likewise.
(elf_backend_mips_rtype_to_howto): Likewise.
(elf_backend_adjust_dynamic_symbol): Likewise.
(elf_backend_finish_dynamic_symbol): Likewise.
(bfd_elf32_bfd_link_hash_table_create): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing: Likewise.
(elf_backend_additional_program_headers): Likewise.
(elf_backend_modify_segment_map): Likewise.
(elf_backend_symbol_processing): Likewise.
* elfxx-mips.c: Include elf-vxworks.h.
(mips_elf_link_hash_entry): Add is_relocation_target and
is_branch_target fields.
(mips_elf_link_hash_table): Add is_vxworks, srelbss, sdynbss, srelplt,
srelplt2, sgotplt, splt, plt_header_size and plt_entry_size fields.
(MIPS_ELF_RELA_SIZE, MIPS_ELF_REL_DYN_NAME): New macros.
(MIPS_RESERVED_GOTNO): Take a mips_elf_link_hash_table argument.
Return 3 for VxWorks.
(ELF_MIPS_GP_OFFSET): Change the argument from a bfd to a
mips_elf_link_hash_table. Return 0 for VxWorks.
(MIPS_ELF_GOT_MAX_SIZE): Change the argument from a bfd to a
mips_elf_link_hash_table. Update the call to ELF_MIPS_GP_OFFSET.
(mips_vxworks_exec_plt0_entry): New variable.
(mips_vxworks_exec_plt_entry): Likewise.
(mips_vxworks_shared_plt0_entry): Likewise.
(mips_vxworks_shared_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize the new hash_entry fields.
(mips_elf_rel_dyn_section): Change the bfd argument to a
mips_elf_link_hash_table. Use MIPS_ELF_REL_DYN_NAME to get
the name of the section.
(mips_elf_initialize_tls_slots): Update the call to
mips_elf_rel_dyn_section.
(mips_elf_gotplt_index): New function.
(mips_elf_local_got_index): Add an input_section argument.
Update the call to mips_elf_create_local_got_entry.
(mips_elf_got_page): Likewise.
(mips_elf_got16_entry): Likewise.
(mips_elf_create_local_got_entry): Add bfd_link_info and input_section
arguments. Create dynamic relocations for each entry on VxWorks.
(mips_elf_merge_gots): Update the use of MIPS_ELF_GOT_MAX_SIZE.
(mips_elf_multi_got): Update the uses of MIPS_ELF_GOT_MAX_SIZE
and MIPS_RESERVED_GOTNO.
(mips_elf_create_got_section): Update the uses of
MIPS_ELF_GOT_MAX_SIZE. Create .got.plt on VxWorks.
(is_gott_symbol): New function.
(mips_elf_calculate_relocation): Use a dynobj local variable.
Update the calls to mips_elf_local_got_index, mips_elf_got16_entry and
mips_elf_got_page_entry. Set G to the .got.plt entry when calculating
VxWorks R_MIPS_CALL* relocations. Calculate and use G for all GOT
relocations on VxWorks. Add dynamic relocations for references
to the VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Don't
create dynamic relocations for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64
in VxWorks executables.
(mips_elf_allocate_dynamic_relocations): Add a bfd_link_info argument.
Use MIPS_ELF_RELA_SIZE to calculate the size of a VxWorks entry.
Don't allocate a null entry on VxWorks.
(mips_elf_create_dynamic_relocation): Update the call to
mips_elf_rel_dyn_section. Use absolute rather than relative
relocations for VxWorks, and make them RELA rather than REL.
(_bfd_mips_elf_create_dynamic_sections): Don't make .dynamic
read-only on VxWorks. Update the call to mips_elf_rel_dyn_section.
Create the .plt, .rela.plt, .dynbss and .rela.bss sections on
VxWorks. Likewise create the _PROCEDURE_LINKAGE_TABLE symbol.
Call elf_vxworks_create_dynamic_sections for VxWorks and
initialize the plt_header_size and plt_entry_size fields.
(_bfd_mips_elf_check_relocs): Don't allow GOT relocations to be
used in VxWorks executables. Don't allocate dynamic relocations
for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 in VxWorks executables.
Set is_relocation_target for each symbol referenced by a relocation.
Allocate .rela.dyn entries for relocations against the special
VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Create GOT
entries for all VxWorks R_MIPS_GOT16 relocations. Don't allocate
a global GOT entry for symbols mentioned in VxWorks R_MIPS_CALL*,
R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 relocations. Update the calls
to mips_elf_rel_dyn_section and mips_elf_allocate_dynamic_relocations.
Set is_branch_target for symbols mentioned in R_MIPS_PC16 or R_MIPS_26
relocations. Don't set no_fn_stub on VxWorks.
(_bfd_mips_elf_adjust_dynamic_symbol): Update the call to
mips_elf_allocate_dynamic_relocations.
(_bfd_mips_vxworks_adjust_dynamic_symbol): New function.
(_bfd_mips_elf_always_size_sections): Do not allocate GOT page
entries for VxWorks, and do not create multiple GOTs.
(_bfd_mips_elf_size_dynamic_sections): Use MIPS_ELF_REL_DYN_NAME.
Handle .got specially for VxWorks. Update the uses of
MIPS_RESERVED_GOTNO and mips_elf_allocate_dynamic_relocations.
Check for sgotplt and splt. Allocate the .rel(a).dyn contents last,
once its final size is known. Set DF_TEXTREL for VxWorks. Add
DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL, DT_PLTRELSZ and DT_JMPREL
tags on VxWorks. Do not add the MIPS-specific tags for VxWorks.
(_bfd_mips_vxworks_finish_dynamic_symbol): New function.
(mips_vxworks_finish_exec_plt): Likewise.
(mips_vxworks_finish_shared_plt): Likewise.
(_bfd_mips_elf_finish_dynamic_sections): Remove an unncessary call
to mips_elf_rel_dyn_section. Use a VxWorks-specific value of
DT_PLTGOT. Handle DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL,
DT_PLTRELSZ and DT_JMPREL. Update the uses of MIPS_RESERVED_GOTNO
and mips_elf_rel_dyn_section. Use a different GOT header for
VxWorks. Don't sort .rela.dyn on VxWorks. Finish the PLT on VxWorks.
(_bfd_mips_elf_link_hash_table_create): Initialize the new
mips_elf_link_hash_table fields.
(_bfd_mips_vxworks_link_hash_table_create): New function.
(_bfd_mips_elf_final_link): Set the GP value to _GLOBAL_OFFSET_TABLE_
on VxWorks. Update the call to ELF_MIPS_GP_OFFSET.
* elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Declare.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_vxworks_link_hash_table_create): Likewise.
* libbfd.h: Regenerate.
* Makefile.am (elfxx-mips.lo): Depend on elf-vxworks.h.
(elf32-mips.lo): Likewise.
* Makefile.in: Regenerate.
* reloc.c (BFD_RELOC_MIPS_COPY, BFD_RELOC_MIPS_JUMP_SLOT): Declare.
* targets.c (bfd_elf32_bigmips_vxworks_vec): Declare.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(_bfd_target_vector): Add entries for them.
gas/
* config/tc-mips.c (mips_target_format): Handle vxworks targets.
(md_begin): Complain about -G being used for PIC. Don't change
the text, data and bss alignments on VxWorks.
(reloc_needs_lo_p): Don't return true for R_MIPS_GOT16 when
generating VxWorks PIC.
(load_address): Extend SVR4_PIC handling to VXWORKS_PIC.
(macro): Likewise, but do not treat la $25 specially for
VxWorks PIC, and do not handle jal.
(OPTION_MVXWORKS_PIC): New macro.
(md_longopts): Add -mvxworks-pic.
(md_parse_option): Don't complain about using PIC and -G together here.
Handle OPTION_MVXWORKS_PIC.
(md_estimate_size_before_relax): Always use the first relaxation
sequence on VxWorks.
* config/tc-mips.h (VXWORKS_PIC): New.
gas/testsuite/
* gas/mips/vxworks1.s, gas/mips/vxworks1.d,
* gas/mips/vxworks1-xgot.d: New tests.
* gas/mips/mips.exp: Run them. Do not run other tests on VxWorks.
include/elf/
* mips.h (R_MIPS_COPY, R_MIPS_JUMP_SLOT): New relocs.
ld/
* configure.tgt (mips*el-*-vxworks*, mips*-*-vxworks*): Use
separate VxWorks emulations.
* emulparams/elf32ebmipvxworks.sh: New file.
* emulparams/elf32elmipvxworks.sh: New file.
* Makefile.am (ALL_EMULATIONS): Add eelf32ebmipvxworks.o and
eelf32elmipvxworks.o.
(eelf32ebmipvxworks.c, eelf32elmipvxworks.c): New rules.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-mips/vxworks1.dd, ld-mips/vxworks1.ld, ld-mips/vxworks1-lib.dd,
* ld-mips/vxworks1-lib.nd, ld-mips/vxworks1-lib.rd,
* ld-mips/vxworks1-lib.s, ld-mips/vxworks1.rd, ld-mips/vxworks1.s,
* ld-mips/vxworks1-static.d, ld-mips/vxworks2.s, ld-mips/vxworks2.sd,
* ld-mips/vxworks2-static.sd: New tests.
* ld-mips/mips-elf.exp: Run them.
* config.bfd (mips*el-*-netbsd*, mips*-*-netbsd*): Use
traditional MIPS ELF targets.
gas:
* configure.tgt: set emulation for mips-*-netbsd*
ld:
* configure.tgt (mips*el-*-netbsd*, mips*-*-netbsd*):
Use the traditional target.
2005-07-14 Jim Blandy <jimb@redhat.com>
* configure.in: Add cases for Renesas m32c.
* configure: Regenerated.
bfd/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for m32c-*-elf (Renesas m32c and m16c).
* Makefile.am (ALL_MACHINES): Add cpu-m32c.lo.
(ALL_MACHINES_CFILES): Add cpu-m32c.c.
(BFD32_BACKENDS): Add elf32-m32c.lo.
(BFD32_BACKENDS_CFILES): Add elf32-m32c.c.
(cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'.
* Makefile.in: Regenerated.
* archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New
arch and mach codes.
(bfd_m32c_arch): New arch info object.
(bfd_archures_list): List bfd_m32c_arch.
* bfd-in2.h: Regenerated.
* config.bfd: Add case for the m32c.
* configure.in: Add case for the m32c.
* configure: Regenerated.
* cpu-m32c.c, elf32-m32c.c: New files.
* libbfd.h: Regenerated.
* targets.c (bfd_elf32_m32c_vec): Declare.
(_bfd_target_vector): List bfd_elf32_m32c_vec.
binutils/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* readelf.c: #include "elf/m32c.h"
(guess_is_rela, dump_relocations, get_machine_name): Add cases for
EM_M32C.
* Makefile.am (readelf.o): Update dependencies.
* Makefile.in: Regenerated.
cpu/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* m32c.cpu, m32c.opc: Machine description for the Renesas M32C.
gas/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C.
* Makefile.am (CPU_TYPES): List m32c.
(TARGET_CPU_CFILES): List config/tc-m32c.c.
(TARGET_CPU_HFILES): List config/tc-m32c.h.
* configure.in: Add case for m32c.
* configure.tgt: Add cases for m32c and m32c-*-elf.
* configure: Regenerated.
* config/tc-m32c.c, config/tc-m32c.h: New files.
* doc/Makefile.am (CPU_DOCS): Add c-m32c.texi.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set M32C.
* doc/as.texinfo: Add text for the M32C-specific options and line
comment characters, and refer to c-m32c.texi.
* doc/c-m32c.texi: New file.
include/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* dis-asm.h (print_insn_m32c): New declaration.
include/elf/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for Renesas M32C and M16C.
* common.h (EM_M32C): New machine number.
* m32c.h: New file.
ld/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o.
(eelf32m32c.c): New target.
* Makefile.in: Regenerated.
* configure.tgt: Add case for m32c-*-elf.
* emulparams/elf32m32c.sh: New file.
opcodes/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New.
* m32c-desc.h, m32c-opc.h: New.
* Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h.
(CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c,
m32c-opc.c.
(ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo,
m32c-ibld.lo, m32c-opc.lo.
(CLEANFILES): List stamp-m32c.
(M32C_DEPS): List stamp-m32c, if CGEN_MAINT.
(CGEN_CPUS): Add m32c.
(m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c)
(m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS.
(m32c_opc_h): New variable.
(stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo)
(m32c-opc.lo): New rules.
* Makefile.in: Regenerated.
* configure.in: Add case for bfd_m32c_arch.
* configure: Regenerated.
* disassemble.c (ARCH_m32c): New.
[ARCH_m32c]: #include "m32c-desc.h".
(disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c.
(disassemble_init_for_target) [ARCH_m32c]: Same.
* cgen-ops.h, cgen-types.h: New files.
* Makefile.am (HFILES): List them.
* Makefile.in: Regenerated.
bfd/
* config.bfd: Use bfd_elf32_i386_vxworks_vec for i?86-*-vxworks.
* configure.in: Add bfd_elf32_i386_vxworks_vec. i386 targets need
elf-vxworks.lo.
* configure: Regenerate.
* Makefile.am (BFD32_BACKENDS): Add elf-vxworks.lo.
(BFD32_BACKENDS_CFILES): Add elf-vxworks.c.
(elf32-i386.lo): Depend on elf-vxworks.h.
(elf-vxworks.lo): New rule.
* Makefile.in: Regenerate.
* elf-bfd.h (elf_backend_data): Update type of
elf_backend_emit_relocs.
(_bfd_elf_link_output_relocs): Update prototype.
* elflink.c (_bfd_elf_link_output_relocs): Always use
bed->elf_backend_emit_relocs when outputting relocations.
* elfxx-target.h (elf_backend_emit_relocs): Default to
_bfd_elf_link_output_relocs.
* targets.c (bfd_elf32_i386_vxworks_vec): Declare.
(_bfd_target_vector): Add bfd_elf32_i386_vxworks_vec.
* elf32-i386.c: Add elf32-i386-vxworks target BFD.
(elf_i386_plt0_entry): Remove padding.
(elf_i386_pic_plt0_entry): Ditto.
(PLTRESOLVE_RELOCS_SHLIB, PLTRESOLVE_RELOCS): Define.
(PLT_NON_JUMP_SLOT_RELOCS): Define.
(elf_i386_link_hash_table): Add srelplt2, hgot, hplt, is_vxworks and
plt0_pad_byte fields.
(elf_i386_link_hash_table_create): Zero them.
(elf_i386_create_dynamic_sections): Create static relocation section.
(allocate_dynrelocs): Allocate space for static PLT relocations.
(elf_i386_size_dynamic_sections): Save shortcuts to PLT and GOT
symbols. Give PLT symbols function type. Don't strip PLT sections
if we have exported symbols from them.
(elf_i386_finish_dynamic_symbol): Fill in VxWorks PLT static
relocation section. Don't mark _GLOBAL_OFFSET_TABLE_ as absolute on
VxWorks.
(elf_i386_finish_dynamic_sections): Allow different pad bytes.
Add relocation for GOT location. Fill in PLT static relocations.
(elf_i386_vxworks_link_hash_table_create): New function.
(elf_i386_vxworks_link_output_symbol_hook): New function.
* elf-vxworks.h: New file.
gas/
* config/tc-i386.h (ELF_TARGET_FORMAT): Define for TE_VXWORKS.
gas/testsuite/
* gas/i386/i386.exp: Don't run divide test on vxworks.
ld/
* Makefile.am: Add eelf_i386_vxworks.
* Makefile.in: Regenerate.
* configure.tgt: Make i?86-*-vxworks use targ_emul=elf_i386_vxworks.
* emulparams/elf_i386_vxworks.sh: New file.
* emulparams/vxworks.sh: New file.
* scripttempl/elf.sc: Add DATA_END_SYMBOLS and ETEXT_NAME.
(earmelfb_linux_eabi.c): New target.
* Makefile.in: Regenerated.
* configure.tgt (arm*b-*-linux-gnueabi): New target.
* emulparams/armelfb_linux_eabi.sh: New file.
(earmelf_linux_eabi.c): New target.
* configure.tgt (arm*-*-linux-gnueabi): Handle it.
* emulparams/armelf_linux_eabi.sh: New file.
* Makefile.in: Regenerated.
* config.bfd: Include 64-bit support for i[3-7]86-*-solaris2*.
* elf64-x86-64.c (elf64_x86_64_section_from_shdr): New function.
(elf_backend_section_from_shdr): Define.
binutils/
* readelf.c (get_x86_64_section_type_name): New function.
(get_section_type_name): Use it.
gas/
* config/tc-i386.c: Include "elf/x86-64.h".
(i386_elf_section_type): New function.
* config/tc-i386.h (md_elf_section_type): Define.
(i386_elf_section_type): New prototype.
gas/testsuite/
* gas/i386/i386.exp: Don't run divide test for targets where '/'
is a comment. Run x86-64-unwind for 64-bit ELF targets.
* gas/i386/x86-64-unwind.d, gas/i386/x86-64-unwind.s: New.
include/
* elf/common.h (PT_SUNW_EH_FRAME): Define.
* elf/x86-64.h (SHT_X86_64_UNWIND): Define.
ld/
* configure.tgt: Include elf_x86_64 for i[3-7]86-*-solaris2*.
* configure.in (bfd_elf32_bigarm_symbian_vec): Add it.
(bfd_elf32_littlearm_symbian_vec): Likewise.
* configure: Regenerated.
* elf-bfd.h (elf_backend_data): Add dynamic_sec_flags.
* elf32-arm.h (PLT_HEADER_SIZE): Do not define.
(PLT_ENTRY_SIZE): Likewise.
(bfd_vma_elf32_arm_symbian_plt_entry): New
variable.
(elf32_arm_link_hash_table): Add plt_header_size, plt_entry_size,
and symbian_p.
(create_got_section): Don't create sections when generating BPABI
objects.
(elf32_arm_create_dynamic_sections): Tidy.
(elf32_arm_link_hash_table_create): Set plt_header_size,
plt_entry_size, and symbian_p.
(elf32_arm_check_relocs): Do not mark .rel.dyn as loadable when
generating BPABI objects.
(allocate_dynrelocs): Use htab->plt_header_size, not
PLT_HEADER_SIZE. Do not add to .got.plt when
generating BPABI objects.
(elf32_arm_finish_dynamic_symbol): Generate Symbian OS PLTs.
* elfarm-nabi.c: Add SymbianOS target vectors.
* elflink.c (_bfd_elf_create_got_section): Use dynamic_sec_flags.
(_bfd_elf_link_create_dynamic_sections): Likewise.
* elfxx-target.h (ELF_DYNAMIC_SEC_FLAGS): New macro.
(elfNN_bed): Use it.
* targets.c (bfd_elf32_bigarm_symbian_vec): New variable.
(bfd_elf32_littlearm_symbian_vec): Likewise.
(_bfd_target_vector): Add them.
* Makefile.am (TARG_ENV_HFILES): Add te-symbian.h.
* Makefile.in: Regenerated.
* configure.in: Set em for arm*-*-symbianelf*.
* configure: Regenerated.
* config/tc-arm.c (elf32_arm_target_format): Use Symbian target
vectors when appropriate.
* config/te-symbian.h: New file.
* Makefile.am (ALL_EMULATIONS): Add earmsymbian.o.
(earmsymbian.c): New target.
* configure.tgt: Use armsymbian emulation for arm*-*-symbianelf*.
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.
* emulparams/armsymbian.sh: New file.
H.J. Lu