PR sanitizer/83392
* sanopt.c (maybe_optimize_ubsan_ptr_ifn): Handle also
INTEGER_CST offset, add it together with bitpos / 8 and
sign extend based on POINTER_SIZE.
* c-c++-common/ubsan/ptr-overflow-sanitization-1.c: Adjust expected
check count from 17 to 14.
From-SVN: r258516
2018-03-14 Richard Biener <rguenther@suse.de>
PR tree-optimization/84830
* tree-ssa-pre.c (compute_antic_aux): Intersect the new ANTIC_IN
with the old one to avoid oscillations.
* gcc.dg/torture/pr84830.c: New testcase.
From-SVN: r258514
2018-03-13 Vladimir Makarov <vmakarov@redhat.com>
PR target/83712
* lra-assigns.c (find_all_spills_for): Ignore uninteresting
pseudos.
(assign_by_spills): Return a flag of reload assignment failure.
Do not process the reload assignment failures. Do not spill other
reload pseudos if they has the same reg class. Update n if
necessary.
(lra_assign): Add a return arg. Set up from the result of
assign_by_spills call.
(find_reload_regno_insns, lra_split_hard_reg_for): New functions.
* lra-constraints.c (split_reg): Add a new arg. Use it instead of
usage_insns if it is not NULL.
(spill_hard_reg_in_range): New function.
(split_if_necessary, inherit_in_ebb): Pass a new arg to split_reg.
* lra-int.h (spill_hard_reg_in_range, lra_split_hard_reg_for): New
function prototypes.
(lra_assign): Change prototype.
* lra.c (lra): Add code to deal with fails by splitting hard reg
live ranges.
From-SVN: r258504
PR c++/84843
* decl.c (duplicate_decls): For redefinition of built-in, use error
and return error_mark_node. For redeclaration, return error_mark_node
rather than olddecl if !flag_permissive.
* g++.dg/ext/pr84843-1.C: New test.
* g++.dg/ext/pr84843-2.C: New test.
From-SVN: r258503
RISC-V relies on aggressive linker relaxation to get good code size. As
a result no text symbol addresses can be known until link time, which
means that alignment must be handled during the link. This alignment
pass is essentially just another linker relaxation, so this has the
unfortunate side effect that linker relaxation is required for
correctness on many RISC-V targets.
The RISC-V assembler has supported an ".option norelax" for a long time
because there are situations in which linker relaxation is a bad idea --
the canonical example is when trying to materialize the initial value of
the global pointer into a register, which would otherwise be relaxed to
a NOP. We've been relying on users who want to disable relaxation for
an entire link to pass "-Wl,--no-relax", but that still relies on the
linker relaxing R_RISCV_ALIGN to handle alignment despite it not being
strictly necessary.
This patch adds a GCC option, "-mno-relax", that disable linker
relaxation by adding ".option norelax" to the top of every generated
assembly file. The assembler is smart enough to handle alignment at
assemble time for files that have never emitted a relaxable relocation,
so this is sufficient to really disable all relaxations in the linker,
which results in significantly faster link times for large objects.
This also has the side effect of allowing toolchains that don't support
linker relaxation (LLVM and the Linux module loader) to function
correctly. Toolchains that don't support linker relaxation should
default to "-mno-relax" and error when presented with any R_RISCV_ALIGN
relocation as those need to be handled for correctness.
gcc/ChangeLog
2018-03-13 Palmer Dabbelt <palmer@sifive.com>
* config/riscv/riscv.opt (mrelax): New option.
* config/riscv/riscv.c (riscv_file_start): Emit ".option
"norelax" when riscv_mrelax is disabled.
* doc/invoke.texi (RISC-V): Document "-mrelax" and "-mno-relax".
From-SVN: r258499
This patch fixes improper handling of comma operator expression in a
struct field initializer as described in:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=46921
Currently, function output_init_element () does not evaluate the left
hand expression in a comma operator that's used for a struct
initializer field if the right hand side is zero-sized. However, the
left hand expression must be evaluated if it's found to have side
effects (for example, a function call).
Patch was successfully bootstrapped and tested on x86_64-linux.
gcc/c:
2018-03-13 David Pagan <dave.pagan@oracle.com>
PR c/46921
* c-typeck.c (output_init_element): Ensure field initializer
expression is always evaluated if there are side effects.
gcc/testsuite:
2018-03-13 David Pagan <dave.pagan@oracle.com>
PR c/46921
* gcc.dg/pr46921.c: New test.
From-SVN: r258497
gcc/c-family/ChangeLog:
PR tree-optimization/84725
* c-attribs.c (handle_nonstring_attribute): Allow attribute nonstring
with all three narrow character types, including their qualified forms.
gcc/testsuite/ChangeLog:
PR tree-optimization/84725
* c-c++-common/Wstringop-truncation-4.c: New test.
* c-c++-common/attr-nonstring-5.c: New test.
From-SVN: r258492
I hadn't realised that on big-endian targets, VEC_UNPACK*HI_EXPR unpacks
the low-numbered lanes and VEC_UNPACK*LO_EXPR unpacks the high-numbered
lanes. This meant that both the SVE patterns and the handling of
fully-masked loops were wrong.
The patch deals with that by making sure that all vec_unpack* optabs
are define_expands, using BYTES_BIG_ENDIAN to choose the appropriate
define_insn. This in turn meant that we can get rid of the duplication
between the signed and unsigned patterns for predicates. (We provide
implementations of both the signed and unsigned optabs because the sign
doesn't matter for predicates: every element contains only one
significant bit.)
Also, the float unpacks need to unpack one half of the input vector,
but the unpacked upper bits are "don't care". There are two obvious
ways of handling that: use an unpack (filling with zeros) or use a ZIP
(filling with a duplicate of the low bits). The code previously used
unpacks, but the sequence involved a subreg that is semantically an
element reverse on big-endian targets. Using the ZIP patterns avoids
that, and at the moment there's no reason to prefer one over the other
for performance reasons, so the patch switches to ZIP unconditionally.
As the comment says, it would be easy to optimise this later if UUNPK
turns out to be better for some implementations.
2018-03-13 Richard Sandiford <richard.sandiford@linaro.org>
gcc/
* tree-vect-loop-manip.c (vect_maybe_permute_loop_masks):
Reverse the choice between VEC_UNPACK_LO_EXPR and VEC_UNPACK_HI_EXPR
for big-endian.
* config/aarch64/iterators.md (hi_lanes_optab): New int attribute.
* config/aarch64/aarch64-sve.md
(*aarch64_sve_<perm_insn><perm_hilo><mode>): Rename to...
(aarch64_sve_<perm_insn><perm_hilo><mode>): ...this.
(*extend<mode><Vwide>2): Rename to...
(aarch64_sve_extend<mode><Vwide>2): ...this.
(vec_unpack<su>_<perm_hilo>_<mode>): Turn into a define_expand,
renaming the old pattern to...
(aarch64_sve_punpk<perm_hilo>_<mode>): ...this. Only define
unsigned packs.
(vec_unpack<su>_<perm_hilo>_<SVE_BHSI:mode>): Turn into a
define_expand, renaming the old pattern to...
(aarch64_sve_<su>unpk<perm_hilo>_<SVE_BHSI:mode>): ...this.
(*vec_unpacku_<perm_hilo>_<mode>_no_convert): Delete.
(vec_unpacks_<perm_hilo>_<mode>): Take BYTES_BIG_ENDIAN into
account when deciding which SVE instruction the optab should use.
(vec_unpack<su_optab>_float_<perm_hilo>_vnx4si): Likewise.
gcc/testsuite/
* gcc.target/aarch64/sve/unpack_fcvt_signed_1.c: Expect zips rather
than unpacks.
* gcc.target/aarch64/sve/unpack_fcvt_unsigned_1.c: Likewise.
* gcc.target/aarch64/sve/unpack_float_1.c: Likewise.
From-SVN: r258489
tlsdesc calls are guaranteed to preserve all Advanced SIMD registers,
but are not guaranteed to preserve the SVE extension of them.
The calls also don't preserve the SVE predicate registers.
The long-term plan for handling the SVE vector registers is CLOBBER_HIGH,
which adds a clobber equivalent of TARGET_HARD_REGNO_CALL_PART_CLOBBERED.
The pattern can then directly model the fact that the low 128 bits are
preserved and the upper bits are clobbered.
However, it's too late now for that to be included in GCC 8, so this
patch conservatively treats the whole vector register as being clobbered.
This has the obvious disadvantage that compiling for SVE can make NEON
code worse, but I don't think there's much we can do about that until
CLOBBER_HIGH is in.
2018-03-13 Richard Sandiford <richard.sandiford@linaro.org>
gcc/
* config/aarch64/aarch64.md (V4_REGNUM, V8_REGNUM, V12_REGNUM)
(V20_REGNUM, V24_REGNUM, V28_REGNUM, P1_REGNUM, P2_REGNUM, P3_REGNUM)
(P4_REGNUM, P5_REGNUM, P6_REGNUM, P8_REGNUM, P9_REGNUM, P10_REGNUM)
(P11_REGNUM, P12_REGNUM, P13_REGNUM, P14_REGNUM): New define_constants.
(tlsdesc_small_<mode>): Turn a define_expand and use
tlsdesc_small_sve_<mode> for SVE. Rename original define_insn to...
(tlsdesc_small_advsimd_<mode>): ...this.
(tlsdesc_small_sve_<mode>): New pattern.
gcc/testsuite/
* gcc.target/aarch64/sve/tls_1.c: New test.
* gcc.target/aarch64/sve/tls_2.C: Likewise.
From-SVN: r258488
One advantage of the new permute handling compared to the old way is
that we can now easily take advantage of the vectoriser's divmod patterns
for SVE.
2018-03-13 Richard Sandiford <richard.sandiford@linaro.org>
gcc/
* config/aarch64/iterators.md (UNSPEC_SMUL_HIGHPART)
(UNSPEC_UMUL_HIGHPART): New constants.
(MUL_HIGHPART): New int iteraor.
(su): Handle UNSPEC_SMUL_HIGHPART and UNSPEC_UMUL_HIGHPART.
* config/aarch64/aarch64-sve.md (<su>mul<mode>3_highpart): New
define_expand.
(*<su>mul<mode>3_highpart): New define_insn.
gcc/testsuite/
* gcc.target/aarch64/sve/mul_highpart_1.c: New test.
* gcc.target/aarch64/sve/mul_highpart_1_run.c: Likewise.
From-SVN: r258487
PR middle-end/84834
* match.pd ((A & C) != 0 ? D : 0): Use INTEGER_CST@2 instead of
integer_pow2p@2 and test integer_pow2p in condition.
(A < 0 ? C : 0): Similarly for @1.
* gcc.dg/pr84834.c: New test.
From-SVN: r258479
PR target/84828
* reg-stack.c (change_stack): Change update_end var from int to
rtx_insn *, if non-NULL don't update just BB_END (current_block), but
also call set_block_for_insn on the newly added insns and rescan.
* g++.dg/ext/pr84828.C: New test.
From-SVN: r258476
PR target/84786
* config/i386/sse.md (sse2_loadhpd): Use Yv constraint rather than v
on the last operand.
* gcc.target/i386/avx512f-pr84786-1.c: New test.
* gcc.target/i386/avx512f-pr84786-2.c: New test.
From-SVN: r258475
PR c++/84704
* tree.c (stabilize_reference_1): Return save_expr (e) for
STATEMENT_LIST even if it doesn't have side-effects.
* g++.dg/debug/pr84704.C: New test.
From-SVN: r258470
This makes the float32-basic.c testcase work on sysv (32-bit Linux).
"float" is promoted to "double" for varargs. The ABI also only defines
the use of double precision in varargs. But _Float32 is not promoted.
Since there is no way of passing single-precision float in FPRs we
should pass SFmode in GPRs (or memory) instead. This is similar to
the 64-bit ABI.
From-SVN: r258454
There still are situations where we have stale LOG_LINKS. This causes
combine to try two-insn combinations I2->I3 where the register set by
I2 is used before I3 as well. Not good.
This patch fixes it by checking for this situation in can_combine_p
(similar to what we already do for three and four insn combinations).
From-SVN: r258452
2018-03-12 Richard Biener <rguenther@suse.de>
PR tree-optimization/84803
* tree-if-conv.c (ifcvt_memrefs_wont_trap): Don't do anything
for refs DR analysis didn't process.
* gcc.dg/torture/pr84803.c: New testcase.
From-SVN: r258446
2018-03-12 Richard Biener <rguenther@suse.de>
PR tree-optimization/84777
* tree-ssa-loop-ch.c (should_duplicate_loop_header_p): For
force-vectorize loops ignore whether we are optimizing for size.
From-SVN: r258444