The code that checks if an auto-increment from i0 or i1 is not lost is
a bit shaky. The code to check the same for i2 is non-existent, and
cannot be implemented in a similar way at all. So, this patch counts
all auto-increments, and makes sure we end up with the same number as
we started with. This works because we still have a check that we
will not duplicate any.
We should do this some better way, but not while we are in stage 4.
PR rtl-optimization/89794
* combine.c (count_auto_inc): New function.
(try_combine): Count how many auto_inc expressions there were in the
original instructions. Ensure we have the same number in the new
instructions. Remove the code that tried to ensure auto_inc side
effects on i1 and i0 are not lost.
gcc/testsuite/
PR rtl-optimization/89794
* gcc.dg/torture/pr89794.c: New testcase.
From-SVN: r270368
PR d/87799
* d-system.h (_mkdir): Forward _mkdir on MinGW to mkdir in system.h.
* configure.ac: Remove d from unsupported languages on mingw and cygwin.
* configure: Regenerate.
From-SVN: r270349
toplevel:
* configure.ac (enable_libphobos): Check LIBPHOBOS_SUPPORTED.
* configure: Regenerate.
libphobos:
* configure.tgt (LIBPHOBOS_SUPPORTED): Default to no.
Set to yes explicitly.
* configure.ac: Handle --enable-libphobos.
(x86_64-*-solaris2.* | i?86-*-solaris2.*): Only mark supported
with gas.
(ENABLE_LIBPHOBOS): New conditional.
* configure: Regenerate.
* Makefile.am (SUBDIRS): Only set if ENABLE_LIBPHOBOS.
* Makefile.in: Regenerate.
From-SVN: r270348
2019-04-09 Martin Liska <mliska@suse.cz>
* Makefile.in: Regenerate.
* Makefile.tpl: Pass GENERATOR_CFLAGS
in all stages.
2019-04-09 Martin Liska <mliska@suse.cz>
* bootstrap-lto-lean.mk: New file.
2019-04-09 Martin Liska <mliska@suse.cz>
* Makefile.in: Use GENERATOR_CFLAGS for all generators.
* doc/install.texi: Document the new config.
From-SVN: r270223
ChangeLog
2019-01-24 Xiong Hu Luo <luoxhu@linux.vnet.ibm.com>
* ChangeLog: replace space with tab.
* MAINTAINERS: delete 1 tab to keep alignment.
From-SVN: r268228
This patch contains the configuration adjustments needed to enable the GCN
back-end.
The new configure check for dlopen is required to allow building the new
gcn-run tool. This tool uses libdl to load the HSA runtime libraries, which
are required to run programs on the GPU. The tool is disabled if libdl is not
available.
2019-01-17 Andrew Stubbs <ams@codesourcery.com>
Kwok Cheung Yeung <kcy@codesourcery.com>
Julian Brown <julian@codesourcery.com>
Tom de Vries <tom@codesourcery.com>
Jan Hubicka <hubicka@ucw.cz>
Martin Jambor <mjambor@suse.cz>
* configure.ac: Likewise.
* configure: Regenerate.
* contrib/config-list.mk: Add amdgcn-amdhsa.
gcc/
* config.gcc: Add amdgcn*-*-amdhsa configuration.
* configure.ac: Check for dlopen.
* configure: Regenerate.
Co-Authored-By: Jan Hubicka <hubicka@ucw.cz>
Co-Authored-By: Julian Brown <julian@codesourcery.com>
Co-Authored-By: Kwok Cheung Yeung <kcy@codesourcery.com>
Co-Authored-By: Martin Jambor <mjambor@suse.cz>
Co-Authored-By: Tom de Vries <tom@codesourcery.com>
From-SVN: r268024
This deletes powerpcspe, which was deprecated for GCC 8.
This does not change the testsuite, or libgcc for rs6000 (which still
is shared code with powerpcspe, so can use some cleanup after this).
/
* contrib/config-list.mk: Remove powerpc-eabispe and powerpc-linux_spe.
gcc/
* config.gcc (Obsolete configurations): Delete powerpc*-*-*spe*.
(Unsupported targets): Add powerpc*-*-*spe*.
(powerpc*-*-*spe*): Delete.
(powerpc-*-eabispe*): Delete.
(powerpc-*-rtems*spe*): Delete.
(powerpc*-*-linux*spe*): Delete.
(powerpc*-*-linux*): Do not handle the linux*spe* targets.
(powerpc-wrs-vxworks*spe): Delete.
(with_cpu setting code): Delete powerpc*-*-*spe* handling.
* config.host (target powerpc*-*-*spe*): Delete.
* doc/invoke.texi (PowerPC SPE Options): Delete.
(PowerPC SPE Options): Delete.
* config/powerpcspe: Delete.
From-SVN: r266961
This patch updates GCC to use autoconf 2.69 and automake 1.15.1.
(That's not the latest automake version, but it's the one used by
binutils-gdb, with which consistency is desirable, and in any case
seems a useful incremental update that should make a future update to
1.16.1 easier.)
The changes are generally similar to the binutils-gdb ones, and are
copied from there where shared files and directories are involved
(there are some further changes to such shared directories, however,
which I'd expect to apply to binutils-gdb once this patch is in GCC).
Largely, obsolete AC_PREREQ calls are removed, while many
AC_LANG_SOURCE calls are added to avoid warnings from aclocal and
autoconf. Multilib support is no longer included in core automake,
meaning that multilib.am needs copying from automake's contrib
directory into the GCC source tree. Autoconf 2.69 has Go support, so
local copies of that support are removed. I hope the D support will
soon be submitted to upstream autoconf so the local copy of that can
be removed in a future update. Changes to how automake generates
runtest calls mean quotes are removed from RUNTEST definitions in five
lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm,
libphobos, libvtv; some others have RUNTEST definitions without
quotes, which are still OK); libgo and libphobos also get
-Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST
do not generate automake warnings.
Note that the regeneration did not include regeneration of
fixincludes/config.h.in (attempting such regeneration resulted in all
the USED_FOR_TARGET conditionals disappearing; and I don't see
anything in the fixincludes/ directory that would result in such
conditionals being generated, unlike in the gcc/ directory). Also
note that libvtv/testsuite/other-tests/Makefile.in was not
regenerated; that directory is not listed as a subdirectory for which
Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm
not sure how it's meant to be regenerated.
While I mostly fixed warnings should running aclocal / automake /
autoconf, there were various such warnings from automake in the
libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos
directories that I did not fix, preferring to leave those to the
relevant subsystem maintainers. Specifically, most of those warnings
were of the following form (example from libgfortran):
Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory,
Makefile.am:48: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they
will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
I think it's best for the relevant maintainers to add subdir-objects
and do any other associated Makefile.am changes needed. In some cases
the paths in the warnings involved ../; I don't know if that adds any
extra complications to the use of subdir-objects.
I've tested this with native, cross and Canadian cross builds. The
risk of any OS-specific issues should I hope be rather lower than if a
libtool upgrade were included (we *should* do such an upgrade at some
point, but it's more complicated - it involves identifying all our
local libtool changes to see if any aren't included in the upstream
version we update to, and reverting an upstream libtool patch that's
inappropriate for use in GCC); I think it would be better to get this
update into GCC so that people can test in different configurations
and we can fix any issues found, rather than to try to get more and
more testing done before it goes in.
top level:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* multilib.am: New file. From automake.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
config:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* math.m4, tls.m4: Use AC_LANG_SOURCE.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
fixincludes:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, configure: Regenerate.
gcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single
line for second argument of AC_DEFINE_UNQUOTED.
* doc/install.texi (Tools/packages necessary for modifying GCC):
Update to autoconf 2.69 and automake 1.15.1.
* aclocal.m4, config.in, configure: Regenerate.
gnattools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
gotools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* config/go.m4: Remove file.
* Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config.
* configure.ac: Remove AC_PREREQ. Do not include config/go.m4.
* Makefile.in, aclocal.m4, configure: Regenerate.
intl:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
libada:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
libatomic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* acinclude.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libbacktrace:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libcc1:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libcpp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* aclocal.m4, config.in, configure: Regenerate.
libdecnumber:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libffi:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove doc/libffi.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, fficonfig.h.in,
include/Makefile.in, man/Makefile.in, testsuite/Makefile.in:
Regenerate.
libgcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* configure: Regenerate.
libgfortran:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libgo [logically part of this change but omitted from the commit]:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* config/go.m4: Remove file.
* config/libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use
-Wno-override in AM_INIT_AUTOMAKE call.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libgomp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libgomp.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libhsail-rt:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libiberty:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
libitm:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libitm.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libobjc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, config.h.in, configure: Regenerate.
liboffloadmic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* plugin/Makefile.am: Include multilib.am.
* plugin/configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, plugin/Makefile.in,
plugin/aclocal.m4, plugin/configure: Regenerate.
libphobos:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use -Wno-override in
AM_INIT_AUTOMAKE call.
* m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call.
* m4/druntime/os.m4: Use AC_LANG_SOURCE.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in,
src/Makefile.in, testsuite/Makefile.in: Regenerate.
libquadmath:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir.
(all-local): Define outside conditional code.
(CLEANFILES): Remove libquadmath.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libsanitizer:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, asan/Makefile.in, configure,
interception/Makefile.in, libbacktrace/Makefile.in,
lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in,
ubsan/Makefile.in: Regenerate.
libssp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.9.5.
* configure.ac: Remove AC_PREREQ. Quote argument to
AC_RUN_IFELSE.
* Makefile.in, aclocal.m4, configure: Regenerate.
libstdc++-v3:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, doc/Makefile.in,
include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in,
python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in,
src/c++17/Makefile.in, src/c++98/Makefile.in,
src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate.
libvtv:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
lto-plugin:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
zlib:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
From-SVN: r265695
ChangeLog:
2018-10-31 Iain Buclaw <ibuclaw@gdcproject.org>
PR bootstrap/87788
PR d/87799
* configure: Rebuild.
* configure.ac: Disable D on systems where it is known not to work.
libphobos/ChangeLog:
2018-10-31 Iain Buclaw <ibuclaw@gdcproject.org>
PR bootstrap/87789
PR d/87818
PR d/87819
* configure.tgt: New file.
From-SVN: r265658
ChangeLog:
* Makefile.def (target_modules): Add libphobos.
(flags_to_pass): Add GDC, GDCFLAGS, GDC_FOR_TARGET and
GDCFLAGS_FOR_TARGET.
(dependencies): Make libphobos depend on libatomic, libbacktrace
configure, and zlib configure.
(language): Add language d.
* Makefile.in: Rebuild.
* Makefile.tpl (BUILD_EXPORTS): Add GDC and GDCFLAGS.
(HOST_EXPORTS): Add GDC.
(POSTSTAGE1_HOST_EXPORTS): Add GDC and GDC_FOR_BUILD.
(BASE_TARGET_EXPORTS): Add GDC.
(GDC_FOR_BUILD, GDC, GDCFLAGS): New variables.
(GDC_FOR_TARGET, GDC_FLAGS_FOR_TARGET): New variables.
(EXTRA_HOST_FLAGS): Add GDC.
(STAGE1_FLAGS_TO_PASS): Add GDC.
(EXTRA_TARGET_FLAGS): Add GDC and GDCFLAGS.
* config-ml.in: Treat GDC and GDCFLAGS like other compiler/flag
environment variables.
* configure: Rebuild.
* configure.ac: Add target-libphobos to target_libraries. Set and
substitute GDC_FOR_BUILD and GDC_FOR_TARGET.
config/ChangeLog:
* multi.m4: Set GDC.
gcc/ChangeLog:
* Makefile.in (tm_d_file_list, tm_d_include_list): New variables.
(TM_D_H, D_TARGET_DEF, D_TARGET_H, D_TARGET_OBJS): New variables.
(tm_d.h, cs-tm_d.h, default-d.o): New rules.
(d/d-target-hooks-def.h, s-d-target-hooks-def-h): New rules.
(s-tm-texi): Also check timestamp on d-target.def.
(generated_files): Add TM_D_H and d-target-hooks-def.h.
(build/genhooks.o): Also depend on D_TARGET_DEF.
* config.gcc (tm_d_file, d_target_objs, target_has_targetdm): New
variables.
* config/aarch64/aarch64-d.c: New file.
* config/aarch64/aarch64-linux.h (GNU_USER_TARGET_D_CRITSEC_SIZE):
Define.
* config/aarch64/aarch64-protos.h (aarch64_d_target_versions): New
prototype.
* config/aarch64/aarch64.h (TARGET_D_CPU_VERSIONS): Define.
* config/aarch64/t-aarch64 (aarch64-d.o): New rule.
* config/arm/arm-d.c: New file.
* config/arm/arm-protos.h (arm_d_target_versions): New prototype.
* config/arm/arm.h (TARGET_D_CPU_VERSIONS): Define.
* config/arm/linux-eabi.h (EXTRA_TARGET_D_OS_VERSIONS): Define.
* config/arm/t-arm (arm-d.o): New rule.
* config/default-d.c: New file.
* config/glibc-d.c: New file.
* config/gnu.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/i386/i386-d.c: New file.
* config/i386/i386-protos.h (ix86_d_target_versions): New prototype.
* config/i386/i386.h (TARGET_D_CPU_VERSIONS): Define.
* config/i386/linux-common.h (EXTRA_TARGET_D_OS_VERSIONS): Define.
(GNU_USER_TARGET_D_CRITSEC_SIZE): Define.
* config/i386/t-i386 (i386-d.o): New rule.
* config/kfreebsd-gnu.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/kopensolaris-gnu.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/linux-android.h (ANDROID_TARGET_D_OS_VERSIONS): Define.
* config/linux.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/mips/linux-common.h (EXTRA_TARGET_D_OS_VERSIONS): Define.
* config/mips/mips-d.c: New file.
* config/mips/mips-protos.h (mips_d_target_versions): New prototype.
* config/mips/mips.h (TARGET_D_CPU_VERSIONS): Define.
* config/mips/t-mips (mips-d.o): New rule.
* config/powerpcspe/linux.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/powerpcspe/linux64.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/powerpcspe/powerpcspe-d.c: New file.
* config/powerpcspe/powerpcspe-protos.h (rs6000_d_target_versions):
New prototype.
* config/powerpcspe/powerpcspe.c (rs6000_output_function_epilogue):
Support GNU D by using 0 as the language type.
* config/powerpcspe/powerpcspe.h (TARGET_D_CPU_VERSIONS): Define.
* config/powerpcspe/t-powerpcspe (powerpcspe-d.o): New rule.
* config/riscv/riscv-d.c: New file.
* config/riscv/riscv-protos.h (riscv_d_target_versions): New
prototype.
* config/riscv/riscv.h (TARGET_D_CPU_VERSIONS): Define.
* config/riscv/t-riscv (riscv-d.o): New rule.
* config/rs6000/linux.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/rs6000/linux64.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/rs6000/rs6000-d.c: New file.
* config/rs6000/rs6000-protos.h (rs6000_d_target_versions): New
prototype.
* config/rs6000/rs6000.c (rs6000_output_function_epilogue):
Support GNU D by using 0 as the language type.
* config/rs6000/rs6000.h (TARGET_D_CPU_VERSIONS): Define.
* config/rs6000/t-rs6000 (rs6000-d.o): New rule.
* config/s390/s390-d.c: New file.
* config/s390/s390-protos.h (s390_d_target_versions): New prototype.
* config/s390/s390.h (TARGET_D_CPU_VERSIONS): Define.
* config/s390/t-s390 (s390-d.o): New rule.
* config/sparc/sparc-d.c: New file.
* config/sparc/sparc-protos.h (sparc_d_target_versions): New
prototype.
* config/sparc/sparc.h (TARGET_D_CPU_VERSIONS): Define.
* config/sparc/t-sparc (sparc-d.o): New rule.
* config/t-glibc (glibc-d.o): New rule.
* configure: Regenerated.
* configure.ac (tm_d_file): New variable.
(tm_d_file_list, tm_d_include_list, d_target_objs): Add substitutes.
* doc/contrib.texi (Contributors): Add self for the D frontend.
* doc/frontends.texi (G++ and GCC): Mention D as a supported language.
* doc/install.texi (Configuration): Mention libphobos as an option for
--enable-shared. Mention d as an option for --enable-languages.
(Testing): Mention check-d as a target.
* doc/invoke.texi (Overall Options): Mention .d, .dd, and .di as file
name suffixes. Mention d as a -x option.
* doc/sourcebuild.texi (Top Level): Mention libphobos.
* doc/standards.texi (Standards): Add section on D language.
* doc/tm.texi: Regenerated.
* doc/tm.texi.in: Add @node for D language and ABI, and @hook for
TARGET_CPU_VERSIONS, TARGET_D_OS_VERSIONS, and TARGET_D_CRITSEC_SIZE.
* dwarf2out.c (is_dlang): New function.
(gen_compile_unit_die): Use DW_LANG_D for D.
(declare_in_namespace): Return module die for D, instead of adding
extra declarations into the namespace.
(gen_namespace_die): Generate DW_TAG_module for D.
(gen_decl_die): Handle CONST_DECLSs for D.
(dwarf2out_decl): Likewise.
(prune_unused_types_walk_local_classes): Handle DW_tag_interface_type.
(prune_unused_types_walk): Handle DW_tag_interface_type same as other
kinds of aggregates.
* gcc.c (default_compilers): Add entries for .d, .dd and .di.
* genhooks.c: Include d/d-target.def.
gcc/po/ChangeLog:
* EXCLUDES: Add sources from d/dmd.
gcc/testsuite/ChangeLog:
* gcc.misc-tests/help.exp: Add D to option descriptions check.
* gdc.dg/asan/asan.exp: New file.
* gdc.dg/asan/gdc272.d: New test.
* gdc.dg/compilable.d: New test.
* gdc.dg/dg.exp: New file.
* gdc.dg/gdc254.d: New test.
* gdc.dg/gdc260.d: New test.
* gdc.dg/gdc270a.d: New test.
* gdc.dg/gdc270b.d: New test.
* gdc.dg/gdc282.d: New test.
* gdc.dg/gdc283.d: New test.
* gdc.dg/imports/gdc170.d: New test.
* gdc.dg/imports/gdc231.d: New test.
* gdc.dg/imports/gdc239.d: New test.
* gdc.dg/imports/gdc241a.d: New test.
* gdc.dg/imports/gdc241b.d: New test.
* gdc.dg/imports/gdc251a.d: New test.
* gdc.dg/imports/gdc251b.d: New test.
* gdc.dg/imports/gdc253.d: New test.
* gdc.dg/imports/gdc254a.d: New test.
* gdc.dg/imports/gdc256.d: New test.
* gdc.dg/imports/gdc27.d: New test.
* gdc.dg/imports/gdcpkg256/package.d: New test.
* gdc.dg/imports/runnable.d: New test.
* gdc.dg/link.d: New test.
* gdc.dg/lto/lto.exp: New file.
* gdc.dg/lto/ltotests_0.d: New test.
* gdc.dg/lto/ltotests_1.d: New test.
* gdc.dg/runnable.d: New test.
* gdc.dg/simd.d: New test.
* gdc.test/gdc-test.exp: New file.
* lib/gdc-dg.exp: New file.
* lib/gdc.exp: New file.
libphobos/ChangeLog:
* Makefile.am: New file.
* Makefile.in: New file.
* acinclude.m4: New file.
* aclocal.m4: New file.
* config.h.in: New file.
* configure: New file.
* configure.ac: New file.
* d_rules.am: New file.
* libdruntime/Makefile.am: New file.
* libdruntime/Makefile.in: New file.
* libdruntime/__entrypoint.di: New file.
* libdruntime/__main.di: New file.
* libdruntime/gcc/attribute.d: New file.
* libdruntime/gcc/backtrace.d: New file.
* libdruntime/gcc/builtins.d: New file.
* libdruntime/gcc/config.d.in: New file.
* libdruntime/gcc/deh.d: New file.
* libdruntime/gcc/libbacktrace.d.in: New file.
* libdruntime/gcc/unwind/arm.d: New file.
* libdruntime/gcc/unwind/arm_common.d: New file.
* libdruntime/gcc/unwind/c6x.d: New file.
* libdruntime/gcc/unwind/generic.d: New file.
* libdruntime/gcc/unwind/package.d: New file.
* libdruntime/gcc/unwind/pe.d: New file.
* m4/autoconf.m4: New file.
* m4/druntime.m4: New file.
* m4/druntime/cpu.m4: New file.
* m4/druntime/libraries.m4: New file.
* m4/druntime/os.m4: New file.
* m4/gcc_support.m4: New file.
* m4/gdc.m4: New file.
* m4/libtool.m4: New file.
* src/Makefile.am: New file.
* src/Makefile.in: New file.
* src/libgphobos.spec.in: New file.
* testsuite/Makefile.am: New file.
* testsuite/Makefile.in: New file.
* testsuite/config/default.exp: New file.
* testsuite/lib/libphobos-dg.exp: New file.
* testsuite/lib/libphobos.exp: New file.
* testsuite/testsuite_flags.in: New file.
From-SVN: r265573
This patch turns dependencies of non-bootstrap targets on bootstrap
targets for bootstrap builds into dependencies on stage_last. This
arrangement gets stage1-bubble to run from stage_last if we haven't
started a bootstrap yet, and to use the current stage otherwise. This
was already the case of target libs, just not of non-bootstrapped host
modules.
In order to retain preexisting dependencies in non-bootstrap builds,
or in gcc-less builds, this introduces support for @unless/@endunless
pairs in Makefile.in.
There is a remaining possibility of problem if activating, in a tree
configured for bootstrap, a parallel build of two or more modules, at
least one bootstrapped and one not. In this case, make might decide
to build stage_current and stage_last in parallel, the latter will
start a submake to build stage1 while the initial make, having
satisfied stage_current, proceeds to build the bootstrapped module in
non-bootstrapped configurations. The two builds will overlap and will
likely conflict. This situation does NOT arise in normal settings,
however: a post-bootstrap build of all-host all-target will indeed
activate such targets concurrently, but only after building all
bootstrapped modules successfully, and it will have both stage_last
and stage_current targets already satisfied, so the potential race
between builds will not arise.
Another remaining problem, that is slightly expanded with this patch,
is that of an interrupted build in a tree configured for bootstrap,
continued with a non-bootstrapped target. Target modules that were
not bootstrapped would already fail to complete the current stage when
activated explicitly in the command line for a retry; host modules,
however, would attempt to build their bootstrapped dependencies, which
is what led to the problem of concurrent builds addressed with this
patch. An interrupted or failed build might still recover correctly,
if the non-bootstrapped target is activated in both builds, because
then make will remove stage_last when its build command is
interrupted, so that it will attempt to recreate it with stage1-bubble
in the second try. A bootstrap build, however, will not be attempting
to build stage_last, so the file will remain and the retry won't go
through stage1-bubble. We have lived with that for target modules, so
we can probably live with that for host modules too.
Another undesirable consequence of this change is that non-boostrapped
host modules, in a tree configured for bootstrap, when activated as
make all-<module>, will build all of stage1 instead of only the
module's usual dependencies. This is intentional and necessary to fix
the parallel-build problem. If it's not desirable, disabling the
unnecessary bootstrap configuration will suffice to restore the
original set of dependencies.
for ChangeLog
* configure.ac: Introduce support for @unless/@endunless.
* Makefile.tpl (dep-kind): Rewrite with cond; return
postbootstrap in some cases.
(make-postboot-dep, postboot-targets): New.
(dependencies): Do not output postbootstrap dependencies at
first. Output non-target ones changed for configure to depend
on stage_last @if gcc-bootstrap, and the original deps @unless
gcc-bootstrap.
* configure.in, Makefile.in: Rebuilt.
From-SVN: r262267
* zlib/configure.ac: Restore old behaviour of only enabling
multilibs when a target subdirectory is defined. This allows
building with srcdir == builddir.
* zlib/configure: Regenerate.
From-SVN: r261739
2018-03-30 Bill Schmidt <wschmidt@linux.ibm.com>
* MAINTAINERS: Update my email address and disambiguate myself
a bit from Will Schmidt.
From-SVN: r258980
Remove an LD subdirectory configuration error:
*** ld does not support target wasm32-unknown-none
*** see ld/configure.tgt for supported targets
make[1]: *** [configure-ld] Error 1
which prevents binutils for the WebAssembly target from being built
unless an explicit `--disable-ld' configuration option has been given.
Users must not have to disable features selected by default to get a
working configuration.
/
* configure.ac <wasm32-*-*> (noconfigdirs): Add `ld'.
* configure: Regenerate.
From-SVN: r257624
Jim has recently started working at SiFive, where he'll be contributing
to our GCC port. Andrew, Kito and I would like him to be a mainatiner.
My understand is that this is the right place to ask.
I've also changed my address to my SiFive one, where I also work -- it
seems cleaner to have everyone use our proper email address.
ChangeLog
2017-11-15 Palmer Dabbelt <palmer@sifive.com>
* MAINTAINERS (RISC-V): Add Jim Wilson as a maintainer.
Use my SiFive email address.
From-SVN: r254774
2017-10-27 Martin Liska <mliska@suse.cz>
* Makefile.tpl: Use proper name of folder as it was renamed
during transition to 4 stages.
* Makefile.in: Regenerate.
From-SVN: r254150
When I originally started work on the new options framework for ARM
I'd worked on the assumption that AWK might not be available on every
build machine (only on developer's machines). However, looking again
I notice that all the options framework relies on it being present for
every build. This means that some of the generated files that come
from running parsecpu.awk do not need to be kept under revision
control.
Unfortunately, it's not _all_ generated files. The build
infrastructure assumes that all .md fragments are in the source tree
and similarly that all .opt fragments are there as well.
Still, eliminating the very big .h files is a step forward as they are
very regular in structure and diff/patch/merge tools can sometimes
make mistakes when resolving conflicts.
So this patch removes the generated .h files from the source tree and
tweaks the make rules accordingly. I've also changed the build rules
to use the stamp technique to eliminate some false dependencies in a
rebuild.
Top-level:
* contrib/gcc_update (files_and_dependencies): Remove stamp rules for
arm-specific auto-generated header files.
gcc:
* common/config/arm/arm-common.c: Adjust include path for
arm-cpu-cdata.h
* t-arm (TM_H): Adjust path for arm-cpu.h.
(arm-cpu.h): Create in build directory. Adjust dependency rules.
(arm-cpu-data.h): Likewise.
(arm-cpu-cdata.h): Likewise.
* config/arm/arm-cpu.h: Delete.
* config/arm/arm-cpu-cdata.h: Delete.
* config/arm/arm-cpu-data.h: Delete.
From-SVN: r249971
2017-05-31 Martin Liska <mliska@suse.cz>
* configure.ac: Add handling of stage2_werror_flags to
action-if-given and to action-if-not-given.
* configure: Regenerate.
From-SVN: r248737
* configure.ac: Add --enable-languages=default to mean default and
make --enable-languages=all mean all supported languages.
* configure: Regenerated.
gcc/
* doc/invoke.texi (--enable-languages): Update documentation.
From-SVN: r248454
* config/powerpcspe: New port. Files are copied from the rs6000
port, with "rs6000" in filenames replaced by "powerpcspe".
* config.gcc (powerpc*-*-*spe*): New.
(powerpc-*-eabispe*): Use ${cpu_type} instead of hardcoded pathnames.
(powerpc-*-rtems*spe*): New.
(powerpc*-*-linux*spe*): New.
(powerpc-wrs-vxworksspe): New.
(powerpc*-*-*, rs6000-*-*): Use ${cpu_type}.
(misc flags) [powerpc*-*-*, rs6000-*-*): Use ${cpu_type}.
* config.host (powerpc*-*-*spe*): New.
From-SVN: r248429
2017-05-19 Martin Liska <mliska@suse.cz>
* configure.ac: Add --enable-werror-always just for
bootstrap-debug (or none build config) and do not add it
when we are on a release branch.
* configure: Regenerated.
From-SVN: r248276
When a processor enters a fast interrupts handler, and duplicate
register banks are configured, the processor saves the user context by
saving the registers in the main register bank to these additional
registers in the duplicate register bank. In this fast interrupt
context, when you specify the rgf_banked_regs option,the compiler does
not save the registers duplicated in the additional register bank are
not saved.
gcc/
2017-05-09 Claudiu Zissulescu <claziss@synopsys.com>
Andrew Burgess <andrew.burgess@embecosm.com>
* config/arc/arc.c (ARC_AUTOBLINK_IRQ_P): Consider fast interrupts
case also.
(ARC_AUTOFP_IRQ_P): Likewise.
(ARC_AUTO_IRQ_P): Likewise.
(rgf_banked_register_count): New variable.
(parse_mrgf_banked_regs_option): New function.
(arc_override_options): Handle rgf_banked_regs option.
(arc_handle_interrupt_attribute): Add firq option.
(arc_compute_function_type): Return fast irq type when required.
(arc_must_save_register): Handle fast interrupts.
(arc_expand_prologue): Do not emit dwarf info for fast interrupts.
(arc_return_address_regs): Update.
* config/arc/arc.h (arc_return_address_regs): Update.
(arc_function_type): Add fast interrupt type.
(ARC_INTERRUPT_P): Update.
(RC_FAST_INTERRUPT_P): Define.
* config/arc/arc.md (simple_return): Update for fast interrupts.
(p_return_i): Likewise.
* config/arc/arc.opt (mrgf-banked-regs): New option.
* doc/invoke.texi (mrgf-banked-regs): Document.
testsuite/
2017-05-09 Claudiu Zissulescu <claziss@synopsys.com>
Andrew Burgess <andrew.burgess@embecosm.com>
* gcc.target/arc/firq-1.c: New file.
* gcc.target/arc/firq-2.c: Likewise.
* gcc.target/arc/firq-3.c: Likewise.
* gcc.target/arc/firq-4.c: Likewise.
* gcc.target/arc/firq-5.c: Likewise.
* gcc.target/arc/firq-6.c: Likewise.
Co-Authored-By: Andrew Burgess <andrew.burgess@embecosm.com>
From-SVN: r247796
The AUX_IRQ_CTRL register controls the behavior of automated register
save and restore or prologue and epilogue sequences during a non-fast
interrupt entry and exit, and context save and restore instructions.
A user passes to the compiler the configuration of the AUX_IRQ_CTRL
register via mirq-ctrl-saved option. This option, specifies
gneral-purposes registers that the processor saves/restores on
interrupt entry and exit, and it is only valid for ARC EM and ARC HS
cores.
gcc/
2017-05-09 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.c (irq_ctrl_saved): New variable.
(ARC_AUTOBLINK_IRQ_P): Define.
(ARC_AUTOFP_IRQ_P): Likewise.
(ARC_AUTO_IRQ_P): Likewise.
(irq_range): New function.
(arc_must_save_register): Likewise.
(arc_must_save_return_addr): Likewise.
(arc_dwarf_emit_irq_save_regs): Likewise.
(arc_override_options): Handle deferred options.
(MUST_SAVE_REGISTER): Deleted, replaced by arc_must_save_register.
(MUST_SAVE_RETURN_ADDR): Deleted, replaced by
arc_must_save_return_addr.
(arc_compute_frame_size): Handle automated save and restore of
registers.
(arc_expand_prologue): Likewise.
(arc_expand_epilogue): Likewise.
* config/arc/arc.md (stack_irq_dwarf): New unspec instruction.
* config/arc/arc.opt (mirq-ctrl-saved): New option.
* doc/invoke.texi (mirq-ctrl-saved): Document option.
testsuite/
2017-05-09 Claudiu Zissulescu <claziss@synopsys.com>
* gcc.target/arc/interrupt-5.c: Newfile.
* gcc.target/arc/interrupt-6.c: Likewise.
* gcc.target/arc/interrupt-7.c: Likewise.
* gcc.target/arc/interrupt-8.c: Likewise.
* gcc.target/arc/interrupt-9.c: Likewise.
From-SVN: r247795
2017-03-20 Palmer Dabbelt <palmer@dabbelt.com>
* MAINTAINERS (CPU Port Maintainers): Add Kito Cheng, Palmer Dabbelt,
and Andrew Waterman as the RISC-V maintainers.
From-SVN: r246280
2017-01-27 Pekka Jaaskelainen <pekka.jaaskelainen@parmance.com>
* configure.ac: Moved the white list of enabling BRIG FE to
libhsail-rt/configure.tgt.
* configure: Regenerated.
* MAINTAINERS: Updated maintainers for BRIG FE and libhsail-rt.
gcc/
* builtin-types.def: Use unsigned_char_type_node for BT_UINT8. Use
uint16_type_node for BT_UINT16.
gcc/brig/
* config-lang.in: Removed stale target-libbrig reference.
libhsail-rt/
* configure.tgt: Moved the white list of supported targets here
from configure.ac. Added i[3456789]86-*-linux* as a supported env
for the BRIG FE.
* README: Added a proper description of what libhsail-rt is.
From-SVN: r244978
PR other/79046
* configure: Regenerated.
config/
* acx.m4 (GCC_BASE_VER): New m4 function.
(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
--with-gcc-major-version-only use just major number from BASE-VER.
gcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
(CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s).
(gcc.o): Depend on $(BASEVER).
* common.opt (dumpfullversion): New option.
* gcc.c (driver_handle_option): Handle OPT_dumpfullversion.
* doc/invoke.texi: Document -dumpfullversion.
* doc/install.texi: Document --with-gcc-major-version-only.
* configure: Regenerated.
libatomic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgomp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
libssp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
liboffloadmic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libquadmath/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libmpx/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libada/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
lto-plugin/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libitm/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
fixincludes/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libcilkrts/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libcc1/
* configure.ac: Add GCC_BASE_VER. For --with-gcc-major-version-only
use just major number from BASE-VER.
* configure: Regenerated.
* Makefile.in: Regenerated.
libobjc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libstdc++-v3/
* configure.ac: Add GCC_BASE_VER.
* fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* po/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/filesystem/Makefile.in: Regenerated.
libvtv/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libsanitizer/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* libbacktrace/Makefile.in: Regenerated.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* configure: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libgfortran/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
From-SVN: r244521
Also fix a stray changelog entry. Some of the regen here is due to
previous changes not being regenerated properly, in part due to the
missing configure dependencies.
* configure: Regenerate.
config/
* picflag.m4: Remove stray \xA0 in comment.
gcc/
* Makefile.in (aclocal_deps): Update and order as per aclocal.m4.
* configure: Regenerate.
* config.in: Regenerate.
libada/
* Makefile.in (configure_deps): Update and order as per
configure.ac sinclude.
* configure: Regenerate.
libgcc/
* Makefile.in (configure_deps): Update.
* configure: Regenerate.
libiberty/
* Makefile.in (configure_deps): Update.
* configure: Regenerate.
libitm/
* Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
From-SVN: r244049
<toplevel>
* configure.ac: Don't use pkg-config to check for bdw-gc.
* configure: Regenerate.
config/
* pkg.m4: Remove.
libobjc/
* configure.ac: Don't use pkg-config to check for bdw-gc.
* configure: Regenerate.
gcc/
* doc/install.texi: Don't use pkg-config to check for bdw-gc.
From-SVN: r243108
Index: ChangeLog
===================================================================
--- ChangeLog (revision 241702)
+++ ChangeLog (working copy)
@@ -1,5 +1,10 @@
2016-10-27 Carl Love <cel@us.ibm.com>
+ * MAINTAINERS (Write After Approval): Fix my entry in the Write After
+ Approval list to make it alphabetical.
+
+2016-10-27 Carl Love <cel@us.ibm.com>
+
* MAINTAINERS (Write After Approval): Add myself.
2016-10-27 Andrew Burgess <andrew.burgess@embecosm.com>
Index: MAINTAINERS
===================================================================
--- MAINTAINERS (revision 241702)
+++ MAINTAINERS (working copy)
@@ -477,9 +477,9 @@
Gabor Loki <loki@inf.u-szeged.hu>
Sandra Loosemore <sandra@codesourcery.com>
Manuel López-Ibáñez <manu@gcc.gnu.org>
+Carl Love <cel@us.ibm.com>
Martin v. Löwis <loewis@informatik.hu-berlin.de>
H.J. Lu <hjl.tools@gmail.com>
-Carl Love <cel@us.ibm.com>
Christophe Lyon <christophe.lyon@st.com>
Luis Machado <luisgpm@br.ibm.com>
Ziga Mahkovec <ziga.mahkovec@klika.si>
From-SVN: r241703
* configure.ac: Add target-libffi to target_libraries.
Readd libgcj target disablings, modified to only target-libffi.
Readd target addition of go to unsupported languages.
* configure: Regenerated.
From-SVN: r240684
2016-09-30 Andrew Haley <aph@redhat.com>
* MAINTAINERS: Remove Per Bothner, Andrew Haley, and Tom Tromey rom
write-after approval. Remove Tom Tromey and Bryce McKinlay from
libgcj.
From-SVN: r240665
2016-09-30 Andrew Haley <aph@redhat.com>
* MAINTAINERS: Move Per Bothner, Andrew Haley, and Tom Tromey to
write-after approval after GCJ deletion.
From-SVN: r240663
Dimitar Dimitrov
Matthew Beliveau
Matthew Beliveau
Nick Clifton
Vladislav Ivanishin
Peter Bergner
Thomas Rodgers
Jun Ma
Jim Wilson
Roland Illig
Richard Biener
Roman Zhuykov
Iain Sandoe
Segher Boessenkool
Segher Boessenkool
Johannes Pfau
Rainer Orth
Iain Buclaw
Martin Liska
Ben Elliston
Alexander Monakov
Alejandro Martinez
Alejandro Martinez
Andrew Stubbs
Harald Anlauf
Kwok Cheung Yeung
Xiong Hu Luo
Jiufu Guo
Li Jia He
Kewen Lin
Xiong Hu Luo
Rainer Orth
Thomas Preud'homme
Gergö Barany
Stafford Horne
Hafiz Abid Qadeer
Joseph Myers
Michael Ploujnikov
Iain Buclaw
Ilya Leoshkevich
Bin Cheng
Thomas Schwinge
Matthew Malcomson
Sam Tebbs
Xuepeng Guo
Vlad Lazar
Martin Liska
Richard Sandiford
Sandra Loosemore
Naveen H.S
DJ Delorie
Andreas Krebbel
H.J. Lu
Sebastian Huber
Bernhard M. Wiedemann
Alexandre Oliva
Jackson Woodruff
Rasmus Villemoes
Eric Botcazou
Matthew Fortune
Tom de Vries
Jozef Lawrynowicz
Bin Cheng
Bin Cheng
Francois H. Theron
Catherine Moore
Paul Clarke
Aaron Sawdey
Joel Sherrill
Amaan Cheval
Bill Schmidt
Nathan Sidwell
Maciej W. Rozycki
Boris Kolpackov
Siddhesh Poyarekar
Sebastian Perta
Jakub Jelinek
Ben Elliston
Qing Zhao
Julia Koval
Sudakshina Das
Palmer Dabbelt
Sebastian Peryt
Igor Tsimbalist
Gerald Pfeifer
Tom de Vries
Pierre-Marie de Rodat
Kyrylo Tkachov
James Greenhalgh
Robin Dapp
Tony Reix
Yury Gribov
Trevor Saunders
Richard Earnshaw
Bernd Schmidt
Maxim Ostapenko
Andrew Jenner
Ian Lance Taylor
Eric Botcazou
Prakhar Bahuguna
Eric Gallager
Sheldon Lobo
Kaz Kojima
Claudiu Zissulescu
Richard Sandiford
Thomas Koenig
Francois-Xavier Coudert
Palmer Dabbelt
Nicolas Koenig
Mark Wielaard
John David Anglin
Martin Jambor
Uros Bizjak
Pekka Jääskeläinen
Uros Bizjak
Jakub Jelinek
Alan Modra
Alexander Ivchenko
Will Schmidt
Will Schmidt
Chenghua Xu
Ma Jiang
Matthias Klose
Matthias Klose
Toma Tabacu
Josh Conner
Carl Love
Andrew Burgess
Hartmut Penner
Andreas Tobler
Steve Ellcey
Jeff Law
Andrew Haley
Andrew Haley