2007-02-24 Richard Guenther <rguenther@suse.de>
PR middle-end/30951
* fold-const.c (fold_binary): Fold x +- CST op x for
EQ_EXPR and NE_EXPR.
* gcc.dg/pr30951.c: New testcase.
From-SVN: r122295
* loop-iv.c (implies_p): Detect additional cases where A implies B.
(determine_max_iter): Take additional LOOP arg; all callers changed.
Lose broken logic dealing with PLUS. Try to limit the upper bound by
one using simplifications.
From-SVN: r122288
2007-02-23 H.J. Lu <hongjiu.lu@intel.com>
* config/i386/i386.c (bdesc_1arg): Initialize
IX86_BUILTIN_MOVSHDUP and IX86_BUILTIN_MOVSLDUP with
"__builtin_ia32_movshdup" and "__builtin_ia32_movsldup".
(ix86_init_mmx_sse_builtins): Remove IX86_BUILTIN_MOVSHDUP
and IX86_BUILTIN_MOVSLDUP.
From-SVN: r122254
* gcc.c (getenv_spec_function): New function.
(static_spec_functions): Add it.
* config/vxworks.h (VXWORKS_TARGET_DIR): Remove.
(VXWORKS_ADDITIONAL_CPP_SPEC): Use getenv to find the VxWorks
header files.
From-SVN: r122240
PR tree-optimization/30843
* tree-vect-transform.c (vect_transform_loop): Remove strided scalar
stores only after all the group is vectorized.
From-SVN: r122225
PR tree-optimization/30858
* tree-vectorizer.c (vect_is_simple_reduction): Check that the stmts
in the reduction cycle have a single use in the loop.
* tree-vectorizer.h (relevant): Add documentation.
From-SVN: r122220
2007-02-21 Trevor Smigiel <trevor_smigiel@playstation.sony.com>
Change the defaults of some parameters and options.
* config/spu/spu-protos.h (spu_optimization_options): Declare.
* config/spu/spu.c (spu_optimization_options): Add.
(spu_override_options): Change params in spu_optimization_options.
* config/spu/spu.h (OPTIMIZATION_OPTIONS): Define.
Register 127 is only 16 byte aligned when used as a frame pointer.
* config/spu/spu-protos.h (spu_init_expanders): Declare.
* config/spu/spu.c (spu_expand_prologue): Set REGNO_POINTER_ALIGN for
HARD_FRAME_POINTER_REGNUM.
(spu_legitimate_address): Use regno_aligned_for_reload.
(regno_aligned_for_load): HARD_FRAME_POINTER_REGNUM is only 16 byte
aligned when frame_pointer_needed is true.
(spu_init_expanders): New. Set alignment of HARD_FRAME_POINTER_REGNUM
to 8 bits.
* config/spu/spu.h (INIT_EXPANDERS): Define.
Make sure shift and rotate instructions have valid immediate operands.
* config/spu/predicates.md (spu_shift_operand): Remove.
* config/spu/spu.c (print_operand): Add [efghEFGH] modifiers.
* config/spu/constraints.md (W, O): Extend range.
* config/spu/spu.md (umask, nmask): Define.
(ashl<mode>3, ashldi3, ashlti3_imm, shlqbybi_ti, shlqbi_ti, shlqby_ti,
lshr<mode>3, rotm_<mode>, lshr<mode>3_imm, rotqmbybi_<mode>,
rotqmbi_<mode>, rotqmby_<mode>, ashr<mode>3, rotma_<mode>,
rotl<mode>3, rotlti3, rotqbybi_ti, rotqby_ti, rotqbi_ti): Use
spu_nonmem_operand instead of spu_shift_operands. Use new modifiers.
(lshr<mode>3_reg): Fix rtl description.
Make sure mulhisi immediate operands are valid.
* config/spu/predicates.md (imm_K_operand): Add.
* config/spu/spu.md (mulhisi3_imm, umulhisi3_imm): Use imm_K_operand.
Generate constants using fsmbi and andi.
* config/spu/spu.c (enum immediate_class): Add IC_FSMBI2.
(print_operand, spu_split_immediate, classify_immediate,
fsmbi_const_p): Handle IC_FSMBI2.
Correctly handle a CONST_VECTOR containing symbols.
* config/spu/spu.c (print_operand): Handle HIGH correctly.
(spu_split_immediate): Split CONST_VECTORs with -mlarge-mem.
(immediate_load_p): Allow symbols that use 2 instructions to create.
(classify_immediate, spu_builtin_splats): Don't accept a CONST_VECTOR
with symbols when flag_pic is set.
(const_vector_immediate_p): New.
(logical_immediate_p, iohl_immediate_p, arith_immediate_p): Don't
accept a CONST_VECTOR with symbols.
(spu_legitimate_constant_p): Use const_vector_immediate_p. Don't
accept a CONST_VECTOR with symbols when flag_pic is set. Handle HIGH
correctly.
* config/spu/spu.md (high, low): Delete.
(low_<mode>): Define.
Remove INTRmode and INTR_REGNUM, which didn't work.
* config/spu/spu.c (spu_conditional_register_usage): Remove reference
of INTR_REGNUM.
* config/spu/spu-builtins.md (spu_idisable, spu_ienable, set_intr,
set_intr_pic, set_intr_cc, set_intr_cc_pic, set_intr_return, unnamed
peephole2 pattern): Don't use INTR or 131.
(movintrcc): Delete.
* config/spu/spu.h (FIRST_PSEUDO_REGISTER, FIXED_REGISTERS,
CALL_USED_REGISTERS, REGISTER_NAMES, INTR_REGNUM): Remove INTR_REGNUM.
* config/spu/spu.md (UNSPEC_IDISABLE, UNSPEC_IENABLE): Remove.
(UNSPEC_SET_INTR): Add.
* config/spu/spu-modes.def (INTR): Remove.
More accurate warnings about run-time relocations.
* config/spu/spu.c (reloc_diagnostic): Test in_section.
Correctly warn about immediate arguments to specific intrinsics.
* config/spu/spu.c (spu_check_builtin_parm): Handle CONST_VECTORs.
(spu_expand_builtin_1): Call spu_check_builtin_parm before checking
the instruction predicate.
Fix tree check errors with latest update.
* config/spu/spu.c (expand_builtin_args, spu_expand_builtin_1): Use
CALL_EXPR_ARG.
(spu_expand_builtin): Use CALL_EXPR_FN.
Add missing specific intrinsics.
* config/spu/spu-builtins.def: Add si_bisled, si_bisledd and
si_bislede.
* config/spu/spu_internals.h: Ditto.
Fix incorrect operand modifiers.
* config/spu/spu-builtins.md (spu_mpy, spu_mpyu): Remove use of %H.
* config/spu/spu.md (xor<mode>3): Change %S to %J.
Optimize one case of zero_extend of a vec_select.
* config/spu/spu.md (_vec_extractv8hi_ze): Add.
Accept any immediate for hbr.
* config/spu/spu.md (hbr): Change s constraints to i.
From-SVN: r122210
2007-02-21 Paul Brook <paul@codesourcery.com>
* config/arm/arm.c (thumb2_final_prescan_insn): Don't incrememnt
condexec_count when skipping USE and CLOBBER.
From-SVN: r122205
PR middle-end/30761
* reload1.c (eliminate_regs_in_insn): In the single_set special
case, attempt to re-recognize the insn before falling back to
having reload fix it up.
From-SVN: r122199
* doc/invoke.texi (RS/6000 and PowerPC Options): Add -mcmpb and -mdfp.
* configure.ac (HAVE_GAS_CMPB): Check for assembler support of the
cmpb instruction.
(HAVE_GAS_DFP): Check for assembler support of decimal floating
point instructions.
* configure: Regenerate.
* config.in: Regenerate.
* config/rs6000/rs6000.opt (mcmpb, mdfp): New.
* config/rs6000/rs6000.c (rs6000_override_options): Add CMPB and DFP
masks to power6 and power6x and to POWERPC_MASKS.
* config/rs6000/rs6000-c.c (rs6000_cpu_cpp_builtins): Define
_ARCH_PWR6.
* config/rs6000/rs6000.h: Check assembler support for CMPB and DFP.
* config/rs6000/sysv4.opt (mprototype): Use variable, not mask.
* config/rs6000/linux64.h (SUBSUBTARGET_OVERRIDE_OPTIONS):
Access PROTOTYPE as variable, not mask.
From-SVN: r122179
* rtlanal.c (find_reg_equal_equiv_note): Do not find REG_EQ*
notes on an insn with multiple sets, even if single_set returns
non-NULL for that insn.
From-SVN: r122177
2007-02-20 Manuel Lopez-Ibanez <manu@gcc.gnu.org>
DJ Delorie <dj@redhat.com>
PR other/30824
* diagnostic.c (diagnostic_count_diagnostic): Move -Werror
logic to...
(diagnostic_report_diagnostic): ... here, and turn them into
real errors. If warnings are inhibited, no need to do
anything.
testsuite/
* gcc.dg/Wfatal.c: New.
* gcc.dg/Wfatal-2.c: New.
* gcc.dg/Werror-1.c: Adjust expectations.
* gcc.dg/Werror-5.c: Likewise.
* gcc.dg/Werror-7.c: Likewise.
* gcc.dg/Werror-10.c: Likewise.
* gcc.dg/Werror-11.c: Likewise.
Co-Authored-By: DJ Delorie <dj@redhat.com>
From-SVN: r122159
* config/ia64/ia64.c (ia64_expand_builtin): Use the
new CALL_EXPR_FN macro for retrieving the function
declaration of the input expression.
From-SVN: r122139
2007-02-19 Andreas Krebbel <krebbel1@de.ibm.com>
* config/s390/s390.c (s390_call_saved_register_used,
s390_function_ok_for_sibcall): Adjust the way CALL_EXPR arguments are
accessed to the new scheme.
From-SVN: r122129
2007-02-18 Eric Christopher <echristo@gmail.com>
* mips.c (mips_prepare_builtin_arg): Add argnum parameter.
Remove use of arglist.
(mips_expand_builtin): Remove use of arglist, pass in expr.
(mips_expand_builtin_direct): Rewrite handling for arglist removal.
(mips_expand_builtin_movtf): Ditto.
(mips_expand_builtin_compare): Ditto.
From-SVN: r122126
2007-02-18 David Edelsohn <edelsohn@gnu.org>
Roger Sayle <roger@eyesopen.com>
* config/rs6000/rs6000.md (bswapsi2): New define_insn and splitter.
Co-Authored-By: Roger Sayle <roger@eyesopen.com>
From-SVN: r122104
2007-02-18 Sandra Loosemore <sandra@codesourcery.com>
* calls.c (initialize_argument_information): Pass original EXP
and STRUCT_VALUE_ADDR_VALUE instead of a list of arguments. Move
code to split complex arguments here, as part of initializing the
ARGS array.
(expand_call): Remove code that builds a list of arguments and
inserts implicit arguments into it. Instead, just count how many
implicit arguments there will be so we can determine the size of
the ARGS array, and let initialize_argument_information do the work.
(split_complex_values): Delete unused function.
From-SVN: r122101
* config/i386/i386.h (x86_use_xchgb): New.
(TARGET_USE_XCHGB): New macro.
* config/i386/i386.c (x86_use_xchgb): Set for PENT4.
* config/i386/i386.md (*rotlhi3_1 splitter, *rotrhi3_1 splitter):
Split after reload into bswaphi for shifts of 8.
(bswaphi_lowpart): Generate rolw insn for HImode byte swaps.
(*bswaphi_lowpart_1): Generate xchgb for Q registers for TARGET_XCHGB
or when optimizing for size.
testsuite/ChangeLog:
* gcc.target/i386/builtin-bswap-1.c: Remove -march=nocona.
* gcc.target/i386/builtin-bswap-3.c: Ditto.
* gcc.target/i386/xchg-1.c: New test.
* gcc.target/i386/xchg-2.c: New test.
From-SVN: r122049
2007-02-16 Richard Guenther <rguenther@suse.de>
Christian Bruel <christian.bruel@st.com>
* fold-const.c (tree_swap_operands_p): Treat SSA_NAMEs like
DECLs but prefer SSA_NAMEs over DECLs.
* gcc.dg/strict-overflow-5.c: New testcase.
Co-Authored-By: Christian Bruel <christian.bruel@st.com>
From-SVN: r122040
2007-02-16 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
PR other/27843
* Makefile.in (SYSTEM_HEADER_DIR): Use single quotes to avoid
nested double- and backquotes.
From-SVN: r122032
PR middle-end/30391
* tree.c (expr_align): Handle MODIFY_EXPR. GIMPLE_MODIFY_STMT
should be unreachable.
(build2_stat): Allow construction of MODIFY_EXPR at any time.
For the time being redirect GIMPLE_MODIFY_STMT to the new
(renamed) build_gimple_modify_stmt_stat.
(build2_gimple_stat): Rename to...
(build_gimple_modify_stmt_stat): Now longer take a CODE argument.
Always build a GIMPLE_MODIFY_STMT node.
* tree.h (build2_gimple, build2_gimple_stat): Delete.
(build_gimple_modify_stmt, build_gimple_modify_stmt_stat): New
declarations.
* tree-cfg.c (factor_computed_gotos, tree_merge_blocks,
gimplify_val): Use build_gimple_modify_stmt instead of build2_gimple.
* tree-complex.c (set_component_ssa_name, expand_complex_move,
expand_complex_div_wide): Likewise.
* tree-ssa-dom.c (record_equivalences_from_stmt): Likewise.
* tree-ssa-loop-im.c (schedule_sm): Likewise.
* tree-ssa-loop-ivopts.c (rewrite_use_nonlinear_expr): Likewise.
* tree-ssa-loop-manip.c (create_iv): Likewise.
* tree-ssa-phiopt.c (conditional_replacement, minmax_replacement,
abs_replacement): Likewise.
* tree-ssa-pre.c (create_expression_by_pieces, poolify_modify_stmt,
realify_fake_stores): Likewise.
* builtins.c (std_expand_builtin_va_start): Build a MODIFY_EXPR
node rather than a GIMPLE_MODIFY_STMT node.
(std_gimpify_va_arg_expr, expand_builtin_va_copy,
fold_builtin_memset, fold_builtin_memory_op, do_mpfr_sincos):
Likewise.
(integer_valued_real_p): Handle MODIFY_EXPR, not GIMPLE_MODIFY_STMT.
* expr.c (expand_expr_real_1): Handle both MODIFY_EXPR and
GIMPLE_MODIFY_STMT.
* gfortran.dg/pr30391-1.f90: New test case.
From-SVN: r122030
2007-02-15 Andrew Pinski <andrew_pinski@playstation.sony.com>
PR middle-end/30433
* fold-const.c (fold_comparison): Add back the
folding of constant complex comparisions.
2007-02-15 Andrew Pinski <andrew_pinski@playstation.sony.com>
PR middle-end/30433
* gcc.c-torture/compile/pr30433.c: New testcase to check
that complex constants comparisions are foldded.
From-SVN: r122029
2007-02-15 Andrew Pinski <andrew_pinski@playstation.sony.com>
PR middle-end/30729
* stmt.c (warn_if_unused_value): VA_ARG_EXPR has side
effects unknown to this function, return early.
2007-02-15 Andrew Pinski <andrew_pinski@playstation.sony.com>
PR middle-end/30729
* gcc.dg/Wunused-value-2.c: New testcase.
From-SVN: r122027
./: * lower-subreg.c (move_eh_region_note): New static function.
(resolve_simple_move): Call it.
(decompose_multiword_subregs): Track blocks for which we resolve a
simple move which is also a control flow insn. Pass them to
find_many_sub_basic_blocks.
(pass_lower_subreg): Add TODO_verify_flow.
(pass_lower_subreg2): Likewise.
testsuite/:
* g++.dg/eh/subreg-1.C: New test.
From-SVN: r122025
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* tree.h (enum tree_code_class): Add tcc_vl_exp.
(VL_EXP_CLASS_P): New.
(TREE_OPERAND_CHECK): Use TREE_OPERAND_LENGTH instead of
TREE_CODE_LENGTH.
(TREE_OPERAND_CHECK_CODE): Likewise.
(GIMPLE_STMT_OPERAND_CHECK): Likewise.
(TREE_RTL_OPERAND_CHECK): Likewise.
(tree_operand_check_failed): Make second parameter the whole tree
instead of its code. Fixed callers.
(VL_EXP_CHECK): New.
(TREE_OPERAND_LENGTH): New.
(VL_EXP_OPERAND_LENGTH): New.
(CALL_EXPR_FN): New.
(CALL_EXPR_STATIC_CHAIN): New.
(CALL_EXPR_ARGS): New.
(CALL_EXPR_ARG): New.
(call_expr_nargs): New.
(CALL_EXPR_ARGP): New.
(build_nt_call_list): Declare.
(build_vl_exp_stat): Declare.
(build_vl_exp): New.
(build_call_list): Declare.
(build_call_nary): Declare.
(build_call_valist): Declare.
(build_call_array): Declare.
(call_expr_arg): Declare.
(call_expr_argp): Declare.
(call_expr_arglist): Declare.
(fold_build_call_list): Declare.
(fold_build_call_list_initializer): Declare.
(fold_call_expr): Declare to replace fold_builtin.
(fold_builtin_fputs): Update to agree with modified definition.
(fold_builtin_strcpy): Likewise.
(fold_builtin_strncpy): Likewise.
(fold_builtin_memory_chk): Likewise.
(fold_builtin_stxcpy_chk): Likewise.
(fold_builtin_strncpy_chk): Likewise.
(fold_builtin_next_arg): Likewise.
(fold_build_call_expr): Declare.
(fold_builtin_call_list): Declare.
(fold_builtin_call_valist): Declare.
(build_call_expr): Declare.
(validate_arglist): Update to agree with modified definition.
(tree_operand_length): New.
(call_expr_arg_iterator): New.
(init_call_expr_arg_iterator): New.
(next_call_expr_arg): New.
(first_call_expr_arg): New.
(more_call_expr_args_p): New.
(FOR_EACH_CALL_EXPR_ARG): New.
* tree.c (tree_code_class_string): Add entries for tcc_vl_exp
and tcc_gimple_stmt.
(tree_code_size): Update documentation. Use sizeof (tree) rather
than sizeof (char *).
(tree_size): Likewise. Add case for tcc_vl_exp.
(tree_node_structure): Add case for tcc_vl_exp.
(contains_placeholder_p): Likewise.
(substitute_in_expr): Likewise.
(substitute_placeholder_in_expr): Likewise.
(stabilize_reference_1): Likewise.
(build3_stat): Remove logic for CALL_EXPRs. Replace with assertion
to diagnose breakage of this interface for constructing CALL_EXPRs.
(build_nt): Add similar assertion here.
(build_nt_call_list): New.
(simple_cst_equal) <CALL_EXPR>: Rewrite to use new accessors.
(iterative_hash_expr): Use TREE_OPERAND_LENGTH instead of
TREE_CODE_LENGTH.
(get_callee_fndecl): Use new CALL_EXPR accessors.
(tree_operand_check_failed): Change parameters to pass entire node
instead of its code, so that we can call TREE_OPERAND_LENGTH on it.
(process_call_operands): New.
(build_vl_exp_stat): New.
(build_call_list): New.
(build_call_nary): New.
(build_call_valist): New.
(build_call_array): New.
(walk_tree): Use TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
(call_expr_arglist): New.
* tree.def (CALL_EXPR): Change representation of CALL_EXPRs to use
tcc_vl_exp instead of a fixed-size tcc_expression.
* doc/c-tree.texi (CALL_EXPR): Document new representation and
accessors for CALL_EXPRs.
(AGGR_INIT_EXPR): Likewise.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* builtins.c (c_strlen): Return NULL_TREE instead of 0.
(expand_builtin_nonlocal_goto): Change parameter to be entire
CALL_EXPR instead of an arglist. Use new CALL_EXPR accessors.
(expand_builtin_prefetch): Likewise.
(expand_builtin_classify_type): Likewise.
(mathfn_built_in): Return NULL_TREE instead of 0.
(expand_errno_check): Use new CALL_EXPR accessors.
(expand_builtin_mathfn): Use new CALL_EXPR accessors and constructors.
Return NULL_RTX instead of 0.
(expand_builtin_mathfn_2): Likewise.
(expand_builtin_mathfn_3): Likewise.
(expand_builtin_interclass_mathfn): Likewise.
(expand_builtin_sincos): Likewise.
(expand_builtin_cexpi): Likewise.
(expand_builtin_int_roundingfn): Likewise.
(expand_builtin_int_roundingfn_2): Likewise.
(expand_builtin_pow): Likewise.
(expand_builtin_powi): Likewise.
(expand_builtin_strlen): Pass entire CALL_EXPR as parameter instead
of arglist, fixing callers appropriately. Use new CALL_EXPR
accessors and constructors. Return NULL_RTX instead of 0.
(expand_builtin_strstr): Likewise.
(expand_builtin_strchr): Likewise.
(expand_builtin_strrchr): Likewise.
(expand_builtin_strpbrk): Likewise.
(expand_builtin_memcpy): Likewise.
(expand_builtin_mempcpy): Likewise.
(expand_builtin_mempcpy_args): New.
(expand_builtin_memmove): Similarly to expand_builtin_mempcpy.
(expand_builtin_memmove_args): New.
(expand_builtin_bcopy): Similarly to expand_builtin_mempcpy.
(expand_movstr): Likewise.
(expand_builtin_strcpy): Likewise.
(expand_builtin_strcpy_args): New.
(expand_builtin_stpcpy): Similarly to expand_builtin_strcpy.
(expand_builtin_strncpy): Likewise.
(expand_builtin_memset): Likewise.
(expand_builtin_memset_args): New.
(expand_builtin_bzero): Similarly to expand_builtin_memset.
(expand_builtin_memcmp): Likewise.
(expand_builtin_strcmp): Likewise.
(expand_builtin_strncmp): Likewise.
(expand_builtin_strcat): Likewise.
(expand_builtin_strncat): Likewise.
(expand_builtin_strspn): Likewise.
(expand_builtin_strcspn): Likewise.
(expand_builtin_args_info): Likewise.
(expand_builtin_va_start): Likewise.
(gimplify_va_arg_expr): Likewise.
(expand_builtin_va_end): Likewise.
(expand_builtin_va_copy): Likewise.
(expand_builtin_frame_address): Likewise.
(expand_builtin_alloca): Likewise.
(expand_builtin_bswap): Likewise.
(expand_builtin_unop): Likewise.
(expand_builtin_fputs): Likewise.
(expand_builtin_expect): Likewise.
(expand_builtin_fabs): Likewise.
(expand_builtin_copysign): Likewise.
(expand_builtin_printf): Likewise.
(expand_builtin_fprintf): Likewise.
(expand_builtin_sprintf): Likewise.
(expand_builtin_init_trampoline): Likewise.
(expand_builtin_signbit): Likewise.
(expand_builtin_fork_or_exec): Likewise.
(expand_builtin_sync_operation): Likewise.
(expand_builtin_compare_and_swap): Likewise.
(expand_builtin_lock_test_and_set): Likewise.
(expand_builtin_lock_release): Likewise.
(expand_builtin): Likewise.
(builtin_mathfn_code): Likewise.
(fold_builtin_constant_p): Pass call arguments individually instead
of as an arglist, fixing callers appropriately. Use new CALL_EXPR
accessors and constructors. Return NULL_TREE instead of 0.
(fold_builtin_expect): Likewise.
(fold_builtin_classify_type): Likewise.
(fold_builtin_strlen): Likewise.
(fold_builtin_nan): Likewise.
(integer_valued_real_p): Likewise.
(fold_trunc_transparent_mathfn): Likewise.
(fold_fixed_mathfn): Likewise.
(fold_builtin_cabs): Likewise.
(fold_builtin_sqrt): Likewise.
(fold_builtin_cbrt): Likewise.
(fold_builtin_cos): Likewise.
(fold_builtin_cosh): Likewise.
(fold_builtin_tan): Likewise.
(fold_builtin_sincos): Likewise.
(fold_builtin_cexp): Likewise.
(fold_builtin_trunc): Likewise.
(fold_builtin_floor): Likewise.
(fold_builtin_ceil): Likewise.
(fold_builtin_round): Likewise.
(fold_builtin_int_roundingfn): Likewise.
(fold_builtin_bitop): Likewise.
(fold_builtin_bswap): Likewise.
(fold_builtin_logarithm): Likewise.
(fold_builtin_hypot): Likewise.
(fold_builtin_pow): Likewise.
(fold_builtin_powi): Likewise.
(fold_builtin_exponent): Likewise.
(fold_builtin_memset): Likewise.
(fold_builtin_bzero): Likewise.
(fold_builtin_memory_op): Likewise.
(fold_builtin_bcopy): Deleted; call site changed to invoke
fold_builtin_memory_op directly.
(fold_builtin_strcpy): Similarly as for fold_builtin_memory_op.
(fold_builtin_strncpy): Likewise.
(fold_builtin_memcmp): Likewise.
(fold_builtin_strcmp): Likewise.
(fold_builtin_strncmp): Likewise.
(fold_builtin_signbit): Likewise.
(fold_builtin_copysign): Likewise.
(fold_builtin_isascii): Likewise.
(fold_builtin_toascii): Likewise.
(fold_builtin_isdigit): Likewise.
(fold_builtin_fabs): Likewise.
(fold_builtin_abs): Likewise.
(fold_builtin_fmin_fmax): Likewise.
(fold_builtin_carg): Likewise.
(fold_builtin_classify): Likewise.
(fold_builtin_unordered_cmp): Likewise.
(fold_builtin_0, fold_builtin_2, fold_builtin_3, fold_builtin_4):
New functions split out from fold_builtin_1.
(fold_builtin_n): New.
(fold_builtin_varargs): New.
(fold_builtin): Deleted. Most callers changed to use fold_call_expr
instead.
(fold_call_expr): New.
(build_function_call_expr): Rewrite to use new helper function.
(fold_builtin_call_list): New.
(build_call_expr): New.
(fold_builtin_call_valist): New.
(rewrite_call_expr): New.
(validate_arg): New.
(validate_arglist): Change parameter to be entire CALL_EXPR instead
of an arglist. Change return type to bool. Use new CALL_EXPR
accessors.
(fold_builtin_strstr): Pass call arguments individually instead
of as an arglist, fixing callers appropriately. Use new CALL_EXPR
accessors and constructors. Return NULL_TREE instead of 0.
(fold_builtin_strchr): Likewise.
(fold_builtin_strrchr): Likewise.
(fold_builtin_strpbrk): Likewise.
(fold_builtin_strcat): Likewise.
(fold_builtin_strncat): Likewise.
(fold_builtin_strspn): Likewise.
(fold_builtin_strcspn): Likewise.
(fold_builtin_fputs): Likewise.
(fold_builtin_next_arg): Likewise.
(fold_builtin_sprintf): Likewise.
(expand_builtin_object_size): Use new CALL_EXPR accessors. Use
NULL_RTX instead of 0.
(expand_builtin_memory_chk): Likewise.
(maybe_emit_chk_warning): Likewise.
(maybe_emit_sprintf_chk_warning): Likewise.
(fold_builtin_object_size): Pass call arguments individually instead
of as an arglist, fixing callers appropriately. Use new CALL_EXPR
accessors and constructors. Return NULL_TREE instead of 0.
(fold_builtin_memory_chk): Likewise.
(fold_builtin_stxcpy_chk): Likewise.
(fold_builtin_strncpy_chk): Likewise.
(fold_builtin_strcat_chk): Likewise.
(fold_builtin_strcat_chk): Likewise.
(fold_builtin_strncat_chk): Likewise.
(fold_builtin_sprintf_chk): Likewise.
(fold_builtin_snprintf_chk): Likewise.
(fold_builtin_printf): Likewise.
(fold_builtin_vprintf): Likewise.
* fold-const.c (negate_expr_p): Use new CALL_EXPR accessors and
constructors.
(operand_equal_p): Add separate tcc_vl_exp/CALL_EXPR case.
(make_range): Use TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
(extract_muldiv_1): Add VL_EXP_CLASS_P case.
(fold_mathfn_compare): Use new CALL_EXPR accessors and constructors.
(fold_unary): Likewise.
(fold_binary): Likewise.
(fold_ternary): Remove CALL_EXPR case, since they are no longer
ternary expressions.
(fold): Add logic for tcc_vl_exp.
(fold_checksum_tree): Make it know about tcc_vl_exp. Use
TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
(fold_build3_stat): Add assertion to flag broken interface for
constructing CALL_EXPRs.
(fold_build_call_list): New.
(fold_build_call_list_initializer): New.
(tree_expr_nonnegative_p): Use new CALL_EXPR accessors and
constructors.
(fold_strip_sign_ops): Likewise.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* tree-dump.c (dequeue_and_dump) <CALL_EXPR>: Use new CALL_EXPR
accessors and dump arguments explicitly.
* tree-pretty-print.c (do_niy): Use TREE_OPERAND_LENGTH instead of
TREE_CODE_LENGTH.
(dump_generic_node): Use new CALL_EXPR accessors and walk arguments
explicitly.
(print_call_name): Use new CALL_EXPR accessors.
* print-tree.c (print_node): Add case tcc_vl_exp. Print
CALL_EXPR arguments explicitly instead of as a list. Use
TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
* tree-vrp.c (stmt_interesting_for_vrp): Use new CALL_EXPR accessors.
(vrp_visit_stmt): Likewise.
* tree-ssa-loop-im.c (outermost_invariant_loop_expr): Make it
know about tcc_vl_exp. Use TREE_OPERAND_LENGTH instead of
TREE_CODE_LENGTH.
(force_move_till_expr): Likewise.
* targhooks.c (default_external_stack_protect_fail): Use
build_call_expr instead of build_function_call_expr.
(default_hidden_stack_protect_fail): Likewise.
* tree-complex.c (expand_complex_libcall): Use build_call_expr to
build the call.
* cgraphbuild.c (build_cgraph_edges): Use new CALL_EXPR accessors
and walk arguments explicitly.
* tree-ssa-loop-niter.c (simplify_replace_tree): Use
TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
(expand_simple_operations): Likewise.
(infer_loop_bounds_from_array): Use new CALL_EXPR accessors.
* gengtype.c (adjust_field_tree_exp): Use TREE_OPERAND_LENGTH instead
of TREE_CODE_LENGTH.
(walk_type): Tweak walking of arrays not to blow up on CALL_EXPRs.
* optabs.c (expand_widen_pattern-expr): Use TREE_OPERAND_LENGTH
instead of TREE_CODE_LENGTH.
* value_prof.c (tree_ic): Use new CALL_EXPR accessors.
(tree_ic_transform): Likewise.
(interesting_stringop_to_profile_p): Pass entire CALL_EXPR as
parameter instead of arglist. Fix callers.
(tree_stringop_fixed_value): Use new CALL_EXPR accessors.
(tree_stringops_transform): Likewise.
(tree_indirect_call_to_profile): Likewise.
(tree_stringops_values_to_profile): Likewise.
* tree-tailcall.c (find_tail_calls): Use new CALL_EXPR iterator.
(eliminate_tail_call): Likewise.
* ipa-cp.c (ipcp_update_callgraph): Use new CALL_EXPR accessors.
* tree-scalar-evolution.c (chrec_contains_symbols_defined_in_loop):
Use TREE_OPERAND_LENGTH and generalize to handle any number of
operands.
(instantiate_parameters_1): Can't handle tcc_vl_exp here.
* omp-low.c (build_omp_barrier): Use build_call_expr.
(lower_rec_input_clauses): Likewise.
(lower_reduction_clauses): Likewise.
(expand_parallel_call): Likewise.
(maybe_catch_exception): Likewise.
(expand_omp_for_generic): Likewise.
(expand_omp_for_static_nochunk): Likewise.
(expand_omp_sections): Likewise.
(lower_omp_single_simple): Likewise.
(lower_omp_single_copy): Likewise.
(lower_omp_master): Likewise.
(lower_omp_ordered): Likewise.
(lower_omp_critical): Likewise.
* ipa-reference.c (check-call): Use new CALL_EXPR iterator.
(scan_for_static_refs): Create tcc_vl_exp case for CALL_EXPR.
* tree-gimple.c (is_gimple_call_addr): Fix doc.
(recalculate_side_effects): Use TREE_OPERAND_LENGTH instead of
TREE_CODE_LENGTH. Add tcc_vl_exp case.
* tree-chrec.c (chrec_contains_symbols): Use TREE_OPERAND_LENGTH
and generalize to handle any number of operands.
(chrec_contains_undetermined): Likewise.
(tree_contains_chrecs): Likewise.
(evolution_function_is_invariant_rec_p): Use TREE_OPERAND_LENGTH.
* cgraphunit.c (update_call_expr): Use new CALL_EXPR accessors.
* tree-ssa-ccp.c (ccp_fold): Use new CALL_EXPR accessors. Use
fold_call_expr instead of fold_builtin.
(ccp_fold_builtin): Likewise. Update calls into builtins.c to
match declarations there.
(fold_stmt): Use new CALL_EXPR constructor and accessors. Doc
updates.
* tree-ssa-loop-ivopts.c (expr_invariant_in_loop_p): Use
TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
* ipa-pure-const.c (check_call): Use new CALL_EXPR accessors.
(scan_function): Add case tcc_vl_exp for CALL_EXPR.
* tree-stdarg.c (execute_optimize_stdarg): Use new CALL_EXPR
accessors.
* tree-ssa-math-opts.c (execute_cse_sincos_1): Use build_call_expr.
(execute_cse_sincos): Use new CALL_EXPR accessors.
* tree-ssa-alias.c (find_used_portions): Use new CALL_EXPR iterator.
* gimple-low.c (lower_function_body): Use build_call_expr.
(lower_builtin_setjmp): Likewise.
* expr.c (emit_block_move_via_libcall): Use build_call_expr.
(set_storage_via_libcall): Likewise.
(safe_from_p): Add tcc_vl_exp case. Use TREE_OPERAND_LENGTH
instead of TREE_CODE_LENGTH.
(expand_expr_real_1): Use new CALL_EXPR accessors.
* tree-browser.c (store_child_info): Use TREE_OPERAND_LENGTH and
generalize to handle any number of operands.
(TB_parent_eq): Likewise.
* predict.c (expr_expected_value): Use new CALL_EXPR accessors.
(strip_builtin_expect): Likewise.
* function.c (gimplify_parameters): Use build_call_expr.
* tree-vectorizer.c (vect_is_simple_reduction): Use TREE_OPERAND_LENGTH
instead of TREE_CODE_LENGTH.
* ipa-type-escape.c (check_call): Use new CALL_EXPR iterators.
(scan_for_refs): Add case tcc_vl_exp for CALL_EXPR.
* tree-data-ref.c (get_references_in_stmt): Use new CALL_EXPR
iterators.
* gimplify.c (build_stack_save_restore): Use build_call_expr.
(gimplify_decl_expr): Likewise.
(gimplify_call_expr): Use fold_call_expr instead of fold_builtin.
Use new CALL_EXPR iterators.
(gimplify_modify_expr_to_memcpy): Use build_call_expr.
(gimplify_modify_expr_to_memset): Likewise.
(gimplify_variable_sized_compare): Likewise.
(gimplify_omp_atomic_fetch_op): Likewise.
(gimplify_omp_atomic_pipeline): Likewise.
(gimplify_omp_atomic_mutex): Likewise.
(gimplify_function_tree): Likewise.
* calls.c (alloca_call_p): Use new CALL_EXPR accessors.
(call_expr_flags): Likewise.
(expand_call): Likewise.
* except.c (expand_builtin_eh_return_data_regno): Pass entire
CALL_EXPR as parameter instead of arglist. Use new CALL_EXPR
accessors.
* coverage.c (create_coverage): Use build_call_expr.
* tree-ssa-pre.c (expression_node_pool, list_node_pool): Delete.
(temp_call_expr_obstack): New.
(pool_copy_list): Delete.
(temp_copy_call_expr): New.
(phi_translate): Add case tcc_vl_exp for CALL_EXPR. Use new
CALL_EXPR accessors. Get rid of special goo for copying argument
lists and use temp_copy_call_expr instead.
(valid_in_sets): Add case tcc_vl_exp for CALL_EXPR. Use new
CALL_EXPR accessors.
(create_expression_by_pieces): Likewise. Use build_call_array
to construct the result instead of fold_build3.
(create_value_expr_from): Add tcc_vl_exp. Delete special goo for
dealing with argument lists.
(init_pre): Remove references to expression_node_pool and
list_node_pool. Init temp_call_expr_obstack instead.
(fini_pre): Remove references to expression_node_pool and
list_node_pool.
* tree-sra.c (sra_walk_call_expr): Use new CALL_EXPR accessors
and walk arguments explicitly instead of as a list.
* tree-mudflap.c (mf_build_check_statement_for): Use build_call_expr.
(mx_register_decls): Likewise.
(mudflap_register_call): Likewise.
(mudflap_finish_file): Likewise.
* ipa-prop.c (ipa_callsite_compute_count): Use new CALL_EXPR accessors.
(ipa_callsite_compute_param): Likewise.
* tree-vect-patterns.c (vect_recog_pow_pattern): Use new CALL_EXPR
accessors and constructor.
* tree-nested.c (convert_nl_goto_reference): Use new CALL_EXPR
accessors and constructor.
(convert_tramp_reference): Likewise.
(convert_call_expr): Likewise.
(finalize_nesting_tree_1): Likewise.
* tree-ssa.c (tree_ssa_useless_type_conversion): Use new CALL_EXPR
accessors.
* tree-ssa-loop-prefetch.c (issue_prefetch_ref): Use build_call_expr.
* tree-inline.c (initialize_inlined_parameters): Pass entire
CALL_EXPR as parameter instead of arglist. Use new CALL_EXPR
accessors.
(estimate_num_insns_1): Use new CALL_EXPR accessors.
(expand_call_inline): Tidy up call to initialize_inlined_parameters.
* tree-vect-transform.c (vect_create_epilog_for_reduction): Use
TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
(vectorizable_reduction): Likewise.
(vectorizable_call): Use new CALL_EXPR iterators.
(vectorizable_conversion): Use build_call_expr.
(vectorizable_operation): Use TREE_OPERAND_LENGTH.
(vect_gen_widened_results_half): Use build_call_expr.
(vect_setup_realignment): Likewise.
(vectorizable_live_operation): Use TREE_OPERAND_LENGTH.
* tree-object-size.c (alloc_object_size): Use new CALL_EXPR accessors.
(pass_through_call): Likewise.
(compute_object_sizes): Likewise. Use fold_call_expr instead of
fold_builtin.
* tree-profile.c (tree_gen_interval_profiler): Use build_call_expr.
(tree_gen_pow2_profiler): Likewise.
(tree_gen_one_value_profiler): Likewise.
(tree_gen_ic_func_profiler): Likewise.
(tree_gen_average_profiler): Likewise.
(tree_gen_ior_profiler): Likewise.
* tree-ssa-structalias.c (get_constraint_for): Add case tcc_vl_exp.
(find_func_aliases): Use new CALL_EXPR accessors. Add case
tcc_vl_exp. Use TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
* tree-ssa-reassoc.c (get_rank): Use TREE_OPERAND_LENGTH instead
of TREE_CODE_LENGTH.
* stmt.c (warn_if_unused_value): Use TREE_OPERAND_LENGTH instead
of TREE_CODE_LENGTH.
* convert.c (convert_to_real): Use new CALL_EXPR accessors and
constructor.
(convert_to_integer): Likewise.
* tree-ssa-operands.c (get_call_expr_operands): Use new CALL_EXPR
accessors.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* config/alpha/alpha.c (alpha_expand_builtin): Use new CALL_EXPR
accessors.
* config/frv/frv.c (frv_expand_builtin): Likewise.
* config/s390/s390.c (s390_expand_builtin): Likewise.
* config/sparc/sparc.c (sparc_gimplify_va_arg): Use build_call_expr.
(sparc_expand_builtin): Use new CALL_EXPR accessors.
* config/i386/i386.c (ix86_function_ok_for_sibcall): Likewise.
(ix86_expand_binop_builtin): Pass entire CALL_EXPR as parameter
instead of arglist. Use new CALL_EXPR accessors on it. Fix callers.
(ix86_expand_store_builtin): Likewise.
(ix86_expand_unop_builtin): Likewise.
(ix86_expand_unop1_builtin): Likewise.
(ix86_expand_sse_compare): Likewise.
(ix86_expand_sse_comi): Likewise.
(ix86_expand_vec_init_builtin): Likewise.
(ix86_expand_vec_ext_builtin): Likewise.
(ix86_expand_vec_set_builtin): Likewise.
(ix86_expand_builtin): Use new CALL_EXPR accessors.
* config/sh/sh.c (sh_expand_builtin): Use new CALL_EXPR accessors.
* config/c4x/c4x.c (c4x_expand_builtin): Likewise.
* config/iq2000/iq2000.c (expand_one_builtin): Pass entire CALL_EXPR
instead of arglist. Use new CALL_EXPR accessors. Fix callers.
(iq2000_expand_builtin): Use new CALL_EXPR accessors.
* config/rs6000/rs6000-c.c (altivec_build_resolved_builtin): Use
build_call_expr.
* config/rs6000/rs6000.c (rs6000_gimplify_va_arg): Likewise.
(rs6000_expand_unop_builtin): Pass entire CALL_EXPR instead of
arglist. Use new CALL_EXPR accessors. Fix callers.
(altivec_expand_abs_builtin): Likewise.
(rs6000_expand_binop_builtin): Likewise.
(altivec_expand_predicate_builtin): Likewise.
(altivec_expand_lv_builtin): Likewise.
(spe_expand_stv_builtin): Likewise.
(altivec_expand_stv_builtin): Likewise.
(rs6000_expand_ternop_builtin): Likewise.
(altivec_expand_ld_builtin): Use new CALL_EXPR accessors.
(altivec_expand_st_builtin): Likewise.
(altivec_expand_dst_builtin): Likewise.
(altivec_expand_vec_init_builtin): Pass entire CALL_EXPR instead of
arglist. Use new CALL_EXPR accessors. Fix callers.
(altivec_expand_vec_set_builtin): Likewise.
(altivec_expand_vec_ext_builtin): Likewise.
(altivec_expand_builtin): Use new CALL_EXPR accessors.
(spe_expand_builtin): Likewise.
(spe_expand_predicate_builtin): Pass entire CALL_EXPR instead of
arglist. Use new CALL_EXPR accessors. Fix callers.
(spe_expand_evsel_builtin): Likewise.
(rs6000_expand_builtin): Use new CALL_EXPR accessors. VCFUX and
FCFSX cases must construct whole new CALL_EXPR, not just arglist.
* config/arm/arm.c (arm_expand_binop_builtin): Pass entire CALL_EXPR
instead of arglist. Use new CALL_EXPR accessors. Fix callers.
(arm_expand_unop_builtin): Likewise.
(arm_expand_builtin): Use new CALL_EXPR accessors.
* config/mips/mips.c (mips_expand_builtin): Use new CALL_EXPR
accessors.
* config/bfin/bfin.c (bfin_expand_binop_builtin): Pass entire CALL_EXPR
instead of arglist. Use new CALL_EXPR accessors. Fix callers.
(bfin_expand_unop_builtin): Likewise.
(bfin_expand_builtin): Use new CALL_EXPR accessors.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* c-semantics.c (build_stmt): Add internal diagnostic check.
* c-pretty-print.c (pp_c_postfix_expression): Use new CALL_EXPR
accessors. Print arguments explicitly instead of as a list.
* c-typeck.c (build_function_call): Use new CALL_EXPR constructors.
* c-omp.c (c_finish_omp_barrier): Use build_call_expr.
(c_finish_omp_flish): Likewise.
* c-common.c (verify_tree): Use new CALL_EXPR accessors. Traverse
arguments explicitly instead of as a list. Use TREE_OPERAND_LENGTH
instead of TREE_CODE_LENGTH.
(check_function_arguments_recurse): Use new CALL_EXPR accessors.
(c_warn_unused_result): Likewise.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* cp-tree.def (AGGR_INIT_EXPR): Adjust documentation.
Change class to tcc_vl_exp.
* call.c (build_call): Use build_call_list instead
of build3.
(build_over_call): Likewise.
(build_new_method_call): Use build_min_non_dep_call_list
instead of build_min_non_dep.
* error.c (dump_call_expr_args): New function.
(dump_aggr_init_expr_args): New function.
(dump_expr) <AGGR_INIT_EXPR, CALL_EXPR, INDIRECT_REF>: Use them.
Update to use new CALL_EXPR and AGGR_INIT_EXPR accessor macros.
* cvt.c (convert_to_void): Use build_call_array instead
of build3; use new AGGR_INIT_EXPR accessor macros.
* mangle.c (write_expression): Use TREE_OPERAND_LENGTH
instead of TREE_CODE_LENGTH.
* dump.c (cp_dump_tree) <AGGR_INIT_EXPR>: Update to use new
AGGR_INIT_EXPR accessor macros.
* cp-gimplify.c (cp_gimplify_init_expr): Use
AGGR_INIT_EXPR_SLOT to set the slot operand.
* cp-tree.h (AGGR_INIT_EXPR_FN): New macro.
(AGGR_INIT_EXPR_SLOT): New macro.
(AGGR_INIT_EXPR_ARG): New macro.
(aggr_init_expr_nargs): New macro.
(AGGR_INIT_EXPR_ARGP): New macro.
(aggr_init_expr_arg_iterator): New.
(init_aggr_init_expr_arg_iterator): New.
(next_aggr_init_expr_arg): New.
(first_aggr_init_expr_arg): New.
(more_aggr_init_expr_args_p): New.
(FOR_EACH_AGGR_INIT_EXPR_ARG): New.
(stabilize_aggr_init): New declaration.
(build_min_non_dep_call_list): Likewise.
* tree.c (process_aggr_init_operands): New function.
(build_aggr_init_array) New function.
(build_cplus_new): Update to use new CALL_EXPR and
AGGR_INIT_EXPR accessor macros. Replace use of build3 with
build_aggr_init_array.
(build_min_non_dep_call_list) New function.
(build_min_nt): Assert input code parameter is not a variable
length expression class.
(build_min, build_min_non_dep): Likewise.
(cp_tree_equal) <CALL_EXPR>: Iterate through the arguments
to check for equality instead of recursing. Handle tcc_vl_exp
tree code classes.
(stabilize_call): Update to only handle CALL_EXPRs, not
AGGR_INIT_EXPRs; use new CALL_EXPR accessor macros.
(stabilize_aggr_init): New function.
(stabilize_init): Use it.
* cxx-pretty-print.c (pp_cxx_postfix_expression)
<AGGR_INIT_EXPR, CALL_EXPR>: Update to use new CALL_EXPR and
AGGR_INIT_EXPR accessor macros and argument iterators.
* pt.c (tsubst_copy) <CALL_EXPR>: Replace build_nt with
build_vl_exp. Iterate through the operands, recursively
processing each one.
(tsubst_copy_and_build) <CALL_EXPR>: Update to use new
CALL_EXPR accessor macros.
(value_dependent_expression_p) <default>: Handle tcc_vl_exp
tree code classes. Use TREE_OPERAND_LENGTH instead of
TREE_CODE_LENGTH.
* semantics.c (finish_call_expr): Use build_nt_call_list
instead of build_nt.
(simplify_aggr_init_expr): Update to use new AGGR_INIT_EXPR
accessor macros. Use build_call_array to construct the
CALL_EXPR node instead of build3
* decl2.c (build_offset_ref_call_from_tree): Use
build_nt_call_list and build_min_non_dep_call_list instead
of build_min_nt and build_min_non_dep.
* parser.c (cp_parser_postfix_expression) <CPP_OPEN_PAREN>:
Use build_nt_call_list instead of build_min_nt.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* java-tree.h (BUILD_MONITOR_ENTER): Use build_call_nary instead
of build3.
(BUILD_MONITOR_EXIT): Likewise.
* java-gimplify.c (java_gimplify_component_ref): Use build_call_expr.
(java_gimplify_modify_expr): Likewise.
* class.c (cache_this_class_ref): Use build_call_expr.
(build_static_field_ref): Likewise.
(emit_indirect_register_classes): Likewise.
(emit_register_classes): Likewise.
* resource.c (write_resource_constructor): Use build_call_expr.
* builtins.c (builtin_creator_function): Change interpretation of
the second parameter to be the whole CALL_EXPR instead of the arglist.
(max_builtin): Tweak parameter list. Use new CALL_EXPR accessors.
(min_builtin): Likewise.
(abs_builtin): Likewise.
(java_build_function_call_expr): Likewise.
(convert_real): Likewise.
(UNMARSHAL3): Likewise.
(UNMARSHAL4): Likewise.
(UNMARSHAL5): Likewise.
(build_arglist_for_builtin): Delete. Fix callers to use
build_call_expr instead.
(putObject_builtin): Tweak parameter list. Use new CALL_EXPR
accessors.
(compareAndSwapInt_builtin): Likewise.
(compareAndSwapLong_builtin): Likewise.
(compareAndSwapObject_builtin): Likewise.
(putVolatile_builtin): Likewise.
(getVolatile_builtin): Likewise.
(VMSupportsCS8_builtin): Likewise.
(check_for_builtin): Pass entire CALL_EXPR to builtin expander
instead of arglist.
* expr.c (build_java_athrow): Use build_call_nary instead of build3.
(build_java_throw_out_of_bounds_exception): Likewise.
(java_check_reference): Likewise.
(build_java_arraystore_check): Likewise.
(build_newarray): Likewise.
(build_anewarray): Likewise.
(expand_java_multinewarray): Use build_call_list instead of build3.
(build_java_monitor): Use build_call_nary instead of build3.
(java_create_object): Likewise.
(expand_java_NEW): Likewise.
(build_instanceof): Likewise.
(expand_java_CHECKCAST): Likewise.
(build_java_soft_divmod): Likewise.
(build_java_binop): Likewise.
(build_field_ref): Likewise.
(build_class_init): Likewise.
(rewrite_arglist_getcaller): Use build_call_expr.
(build_invokeinterface): Use build_call_nary instead of build3.
(expand_invoke): Use build_call_list instead of build3.
(build_jni_stub): Use build_call_nary, build_call_list, or
build_call_expr instead of build3.
(expand_java_field_op): Use build_call_expr instead of build3.
(force_evaluation_order): Use new CALL_EXPR accessors.
* lang.c (java_get_callee_fndecl): Use new CALL_EXPR accessors.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* objc-act.c (receiver_is_class_object): Use new CALL_EXPR accessors.
(objc_get_callee_fndecl): Likewise.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* trans-expr.c (gfc_conv_power_op): Use build_call_expr.
(gfc_conv_string_tmp): Likewise.
(gfc_conv_concat_op): Likewise.
(gfc_build_compare_string): Likewise.
(gfc_conv_function_call): Use build_call_list instead of build3.
* trans-array.c (gfc_trans_allocate_array_storage): Use
build_call_expr.
(gfc_grow_array): Likewise.
(gfc_trans_array_ctor_element): Likewise.
(gfc_trans_array_constructor_value): Likewise.
(gfc_array_allocate): Likewise.
(gfc_array_deallocate): Likewise.
(gfc_trans_auto_array_allocation): Likewise.
(gfc_trans_dummy_array_bias): Likewise.
(gfc_conv_array_parameter): Likewise.
(gfc_trans_dealloc_allocated): Likewise.
(gfc_duplicate_allocatable): Likewise.
* trans-openmp.c (gfc_trans_omp_barrier): Use build_call_expr.
(gfc_trans_omp_flush): Likewise.
* trans-stmt.c (gfc_conv_elementel_dependencies): Use build_call_expr.
(gfc_trans_pause): Likewise.
(gfc_trans_stop): Likewise.
(gfc_trans_character_select): Likewise.
(gfc_do_allocate): Likewise.
(gfc_trans_assign_need_temp): Likewise.
(gfc_trans_pointer_assign_need_temp): Likewise.
(gfc_trans_forall_1): Likewise.
(gfc_trans_where_2): Likewise.
(gfc_trans_allocate): Likewise.
(gfc_trans_deallocate): Likewise.
* trans.c (gfc_trans_runtime_check): Use build_call_expr.
* trans-io.c (gfc_trans_open): Use build_call_expr.
(gfc_trans_close): Likewise.
(build_filepos): Likewise.
(gfc_trans_inquire): Likewise.
(NML_FIRST_ARG): Delete.
(NML_ADD_ARG): Delete.
(transfer_namelist_element): Use build_call_expr.
(build_dt): Likewise.
(gfc_trans_dt_end): Likewise.
(transfer_expr): Likewise.
(transfer_array-desc): Likewise.
* trans-decl.c (gfc_generate_function_code): Use build_call_expr.
(gfc_generate_constructors): Likewise.
* trans-intrinsic.c (gfc_conv_intrinsic_ctime): Use build_call_expr.
(gfc_conv_intrinsic_fdate): Likewise.
(gfc_conv_intrinsic_ttynam): Likewise.
(gfc_conv_intrinsic_array_transfer): Likewise.
(gfc_conv_associated): Likewise.
(gfc_conv_intrinsic_si_kind): Likewise.
(gfc_conv_intrinsic_trim): Likewise.
(gfc_conv_intrinsic_repeat: Likewise.
(gfc_conv_intrinsic_iargc): Likewise.
Co-Authored-By: Brooks Moses <brooks.moses@codesourcery.com>
Co-Authored-By: Lee Millward <lee.millward@codesourcery.com>
From-SVN: r122018
* gimplify.c (gimplify_modify_expr): During gimplification, attach a
DECL on the rhs to a DECL on the lhs for debug info purposes if the
former is ignored but not the latter.
From-SVN: r122015
* expr.c (expand_expr_real_1) <normal_inner_ref>: If a temporary
is made and the reference doesn't use the alias set of its type,
do not create the temporary using that type.
From-SVN: r122014
* tree-dump.c (dump_switch_p_1): Require exact match of the option
name.
* gcc.dg/tree-prof/update-tailcall.c: Use -fdump-tree-tailc
instead of -fdump-tree-tailcall.
From-SVN: r121967
PR tree-optimization/30771
* tree-vect-analyze.c (vect_determine_vectorization_factor): Traverse
also phi nodes.
(vect_analyze_operations): Induction phis can now be marked as
used_in_loop.
(vect_mark_stmts_to_be_vectorized): No special treatment for phis.
Update documentation accordingly.
From-SVN: r121950
* builtin-types.def (DEF_FUNCTION_TYPE_x): Do not imply that at most 3 arguments are supported.
(DEF_FUNCTION_TYPE_VAR_5): Fix typo in its description.
From-SVN: r121946
* config/i386/i386.md (fixuns_trunc<SSEMODEF>si_1): New insn.
(fixuns_trunc<SSEMODEF>si2): Use it.
* config/i386/sse.md (vec_setv4sf_0): Export.
* config/i386/i386.c (ix86_build_const_vector): Export.
(ix86_split_convert_uns_si_sse): Rename from
ix86_expand_convert_uns_si_sse and rewrite as a splitter.
* config/i386/i386-protos.h: Update.
From-SVN: r121877
* config/i386/i386.md (paritydi2, paritysi2): New expanders.
(paritydi2_cmp, paritydi2_cmp): New insn and split patterns.
(*parityhi2_cmp, *parityqi2_cmp): New insn patterns.
testsuite/ChangeLog:
* gcc.target/i386/parity-1.c: New test.
* gcc.target/i386/parity-2.c: New test.
From-SVN: r121863
* tree.h (DECL_IGNORED_P): Document further effect for FUNCTION_DECL.
* cgraphunit.c (cgraph_expand_function): If DECL_IGNORED_P is set on
the function, temporarily point the debug interface to the null one.
From-SVN: r121861
* config/i386/i386.md (*bswapdi2_rex): Renamed from bswapdi2.
(bswapdi2): New define_expand to implement 32-bit implementation.
* gcc.target/i386/builtin-bswap-3.c: New test case.
From-SVN: r121851
* doc/invoke.texi (Overall Options): Document --help=.
* gcc.c (target_help_flag): Rename to print_subprocess_flag.
(cc1_options): Pass --help= on to cc1.
(display_help): Add description of --help=.
(process_command): Add code to handle --help=. Allow translated
--help and --target-help switches to be passed on to compiler sub-process.
(main): Remove unused if statement.
* opts.c (columns): Remove.
(LEFT_COLUMN): Define.
(wrap_help): Add columns argument.
(print_filtered_help): Change parameters to be an include bitmask,
an exclude bitmask, an any bitmask and the column width. Move the
code to display the params list here. Add code to display the
status of options rather than their descriptions if the quiet flag
is not active.
(print_specific_help): Change parameters to be an include bitmask,
an exclude bitmask and an any bitmask. Move code to look up the
column width here. Decide upon the title for an options listing.
(common_handle_options): Add code to handle --help=. Adapt code
for --help and --target-help to use the revised form of the
print_specific_help function.
(print_help): Delete.
(print_param_help): Delete.
(print_switch): Delete.
* opts.h (cl_lang_count): Add prototype.
(CL_PARAMS, CL_WARNING, CL_OPTIMIZATION, CL_MIN_OPTION_CLASS, CL_MAX_OPTION_CLASS): New defines.
* optc-gen.awk: Add construction of cl_lang_count.
* c.opt: Add Warning attribute to warning options and Optimization attribute to optimization options.
* common.opt: Likewise.
Add --help=.
Add -fhelp and -ftarget-help as aliases for the transformed --help and --target-help options.
* opt-functions.awk: Add code to handle Warning and Optimization attributes.
From-SVN: r121849
PR tree-optimization/29145
* tree-data-ref.c (base_addr_differ_p): Make us more conservative
in our handling of restrict qualified pointers.
From-SVN: r121844
2007-02-12 Manuel Lopez-Ibanez <manu@gcc.gnu.org>
PR middle-end/7651
* doc/invoke.texi (Wunused-value): Update description.
(Wextra): Delete item.
* opts.c (set_Wextra): Don't use the value of Wextra to set the
value of Wunused-value.
* c-typeck.c (c_process_expr_stmt): Don't check extra_warnings.
(c_finish_stmt_expr): Don't check extra_warnings.
(emit_side_effect_warnings): The caller is responsible to check
warn_unused_value.
cp/
* cp-gimplify.c (gimplify_expr_stmt): Don't check extra_warnings.
Check warn_unused_value just once.
From-SVN: r121843
* fwprop.c (try_fwprop_subst): Use set_unique_reg_note
to add the REG_EQ* note.
* see.c (see_merge_one_use_extension): Likewise.
* local-alloc.c (update_equiv_regs): Likewise. Also don't
turn REG_EQUAL notes into REG_EQUIV notes if the target
register may have more than one set.
* function.c (assign_parm_setup_reg): Use set_unique_reg_note.
* gcse.c (try_replace_reg): Likewise.
* alias.c (init_alias_analysis): Use find_reg_equal_equiv_note.
* calls.c (fixup_tail_calls): Likewise. Abort if there is
more than one REG_EQUIV note.
* reload1.c (gen_reload): Use set_unique_reg_note.
From-SVN: r121821
PR target/30634
* pa.md (movdf): For 64-bit target, fail if operand 1 is a non-zero
CONST_DOUBLE and operand 0 is a hard register.
(movdi): For 64-bit target, remove code to force CONST_DOUBLE to
memory. Fail if operand 1 is a non-zero CONST_INT and operand 0
is a hard floating-point register.
From-SVN: r121802
* calls.c (store_one_arg): Pass correct alignment to
emit_push_insn for non-BLKmode values.
* expr.c (emit_push_insn): If STRICT_ALIGNMENT, copy to an
unaligned stack slot via a suitably aligned slot.
From-SVN: r121736