2006-05-13 18:11:23 +02:00
|
|
|
/*
|
|
|
|
* QEMU i440FX/PIIX3 PCI Bridge Emulation
|
|
|
|
*
|
|
|
|
* Copyright (c) 2006 Fabrice Bellard
|
2007-09-16 23:08:06 +02:00
|
|
|
*
|
2006-05-13 18:11:23 +02:00
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
|
|
* in the Software without restriction, including without limitation the rights
|
|
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
|
|
* furnished to do so, subject to the following conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice shall be included in
|
|
|
|
* all copies or substantial portions of the Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
|
|
* THE SOFTWARE.
|
|
|
|
*/
|
|
|
|
|
2016-01-26 19:17:03 +01:00
|
|
|
#include "qemu/osdep.h"
|
2013-02-04 15:40:22 +01:00
|
|
|
#include "hw/hw.h"
|
2013-02-05 17:06:20 +01:00
|
|
|
#include "hw/i386/pc.h"
|
2013-02-04 15:40:22 +01:00
|
|
|
#include "hw/pci/pci.h"
|
|
|
|
#include "hw/pci/pci_host.h"
|
2013-02-05 17:06:20 +01:00
|
|
|
#include "hw/isa/isa.h"
|
2013-02-04 15:40:22 +01:00
|
|
|
#include "hw/sysbus.h"
|
include/qemu/osdep.h: Don't include qapi/error.h
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-14 09:01:28 +01:00
|
|
|
#include "qapi/error.h"
|
2012-12-17 18:20:00 +01:00
|
|
|
#include "qemu/range.h"
|
2013-02-05 17:06:20 +01:00
|
|
|
#include "hw/xen/xen.h"
|
|
|
|
#include "hw/pci-host/pam.h"
|
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set
Traditional PCI config space access is achieved by writing a 32 bit
value to io port 0xcf8 to identify the bus, device, function and config
register. Port 0xcfc then contains the register in question. But if you
write the appropriate pair of magic values to 0xcf9, the machine will
reboot. Spectacular! And not standardised in any way (certainly not part
of the PCI spec), so different chipsets may have different requirements.
Booo.
In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control
Register. Bit 1 (System Reset, SRST) would normally differentiate between
soft reset and hard reset, but we ignore the difference beyond allowing
the guest to read it back.
RHBZ reference: 890459
This patch introduces the following overlap between the preexistent
"pci-conf-idx" region and the "piix3-reset-control" region just being
added. Partial output from "info mtree":
I/O
0000000000000000-000000000000ffff (prio 0, RW): io
0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx
0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control
I sanity-checked the patch by booting a RHEL-6.3 guest and found no
problems. I summoned gdb and set a breakpoint on rcr_write() in order to
gather a bit more confidence. Relevant frames of the stack:
kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1,
count=1) [kvm-all.c:1422]
cpu_outb (addr=3321, val=6 '\006') [ioport.c:289]
ioport_write (index=0, address=3321, data=6) [ioport.c:83]
ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6)
[ioport.c:212]
memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0,
width=1, data=6) [memory.c:439]
access_with_adjusted_size (addr=0, value=0x7f3f531fbac0,
size=1, access_size_min=1,
access_size_max=4,
access=0x7f3f5f6e0f90
<memory_region_write_accessor>,
opaque=0x7f3f6227b668)
[memory.c:364]
memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0,
value=0x7f3f531fbac0, size=1,
shift=0, mask=255)
[memory.c:334]
rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1)
[hw/piix_pci.c:498]
The dispatch happens in ioport_write(); "index=0" means byte-wide access:
static void ioport_write(int index, uint32_t address, uint32_t data)
{
static IOPortWriteFunc * const default_func[3] = {
default_ioport_writeb,
default_ioport_writew,
default_ioport_writel
};
IOPortWriteFunc *func = ioport_write_table[index][address];
if (!func)
func = default_func[index];
func(ioport_opaque[address], address, data);
}
The "ioport_write_table" and "ioport_opaque" arrays describe the flattened
IO port space. The first array is less interesting (it selects a thunk
function). The "ioport_opaque" array is interesting because it decides how
writing to the port is implemented ultimately.
4-byte wide access to 0xcf8 (pci-conf-idx):
(gdb) print ioport_write_table[2][0xcf8]
$1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write
$2 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f5575cb <pci_host_config_write>
1-byte wide access to 0xcf9 (piix3-reset-control):
(gdb) print ioport_write_table[0][0xcf9]
$3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write
$4 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f6b42f1 <rcr_write>
The higher priority of "piix3-reset-control" ensures that the 0xcf9
entries in ioport_write_table / ioport_opaque will always belong to it,
independently of its relative registration order versus "pci-conf-idx".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
|
|
|
#include "sysemu/sysemu.h"
|
2013-07-29 16:47:57 +02:00
|
|
|
#include "hw/i386/ioapic.h"
|
|
|
|
#include "qapi/visitor.h"
|
2015-11-13 07:55:48 +01:00
|
|
|
#include "qemu/error-report.h"
|
2007-11-17 18:14:51 +01:00
|
|
|
|
2009-12-15 12:26:07 +01:00
|
|
|
/*
|
|
|
|
* I440FX chipset data sheet.
|
2018-10-24 00:44:25 +02:00
|
|
|
* https://wiki.qemu.org/File:29054901.pdf
|
2009-12-15 12:26:07 +01:00
|
|
|
*/
|
|
|
|
|
2013-07-29 16:47:52 +02:00
|
|
|
#define I440FX_PCI_HOST_BRIDGE(obj) \
|
|
|
|
OBJECT_CHECK(I440FXState, (obj), TYPE_I440FX_PCI_HOST_BRIDGE)
|
|
|
|
|
2012-08-20 19:08:09 +02:00
|
|
|
typedef struct I440FXState {
|
|
|
|
PCIHostState parent_obj;
|
2016-06-15 19:56:31 +02:00
|
|
|
Range pci_hole;
|
2013-07-29 16:47:57 +02:00
|
|
|
uint64_t pci_hole64_size;
|
2017-11-11 16:25:00 +01:00
|
|
|
bool pci_hole64_fix;
|
2013-11-06 00:46:27 +01:00
|
|
|
uint32_t short_root_bus;
|
2012-08-20 19:08:09 +02:00
|
|
|
} I440FXState;
|
2006-05-13 18:11:23 +02:00
|
|
|
|
2011-04-01 13:43:23 +02:00
|
|
|
#define PIIX_NUM_PIC_IRQS 16 /* i8259 * 2 */
|
2011-04-01 13:43:22 +02:00
|
|
|
#define PIIX_NUM_PIRQS 4ULL /* PIRQ[A-D] */
|
2011-06-15 18:36:56 +02:00
|
|
|
#define XEN_PIIX_NUM_PIRQS 128ULL
|
2011-04-01 13:43:23 +02:00
|
|
|
#define PIIX_PIRQC 0x60
|
2011-04-01 13:43:22 +02:00
|
|
|
|
2009-08-28 15:28:18 +02:00
|
|
|
typedef struct PIIX3State {
|
|
|
|
PCIDevice dev;
|
2011-04-01 13:43:23 +02:00
|
|
|
|
|
|
|
/*
|
|
|
|
* bitmap to track pic levels.
|
|
|
|
* The pic level is the logical OR of all the PCI irqs mapped to it
|
|
|
|
* So one PIC level is tracked by PIIX_NUM_PIRQS bits.
|
|
|
|
*
|
|
|
|
* PIRQ is mapped to PIC pins, we track it by
|
|
|
|
* PIIX_NUM_PIRQS * PIIX_NUM_PIC_IRQS = 64 bits with
|
|
|
|
* pic_irq * PIIX_NUM_PIRQS + pirq
|
|
|
|
*/
|
|
|
|
#if PIIX_NUM_PIC_IRQS * PIIX_NUM_PIRQS > 64
|
|
|
|
#error "unable to encode pic state in 64bit in pic_levels."
|
|
|
|
#endif
|
|
|
|
uint64_t pic_levels;
|
|
|
|
|
2009-08-28 15:28:19 +02:00
|
|
|
qemu_irq *pic;
|
2011-04-01 13:43:22 +02:00
|
|
|
|
|
|
|
/* This member isn't used. Just for save/load compatibility */
|
|
|
|
int32_t pci_irq_levels_vmstate[PIIX_NUM_PIRQS];
|
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set
Traditional PCI config space access is achieved by writing a 32 bit
value to io port 0xcf8 to identify the bus, device, function and config
register. Port 0xcfc then contains the register in question. But if you
write the appropriate pair of magic values to 0xcf9, the machine will
reboot. Spectacular! And not standardised in any way (certainly not part
of the PCI spec), so different chipsets may have different requirements.
Booo.
In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control
Register. Bit 1 (System Reset, SRST) would normally differentiate between
soft reset and hard reset, but we ignore the difference beyond allowing
the guest to read it back.
RHBZ reference: 890459
This patch introduces the following overlap between the preexistent
"pci-conf-idx" region and the "piix3-reset-control" region just being
added. Partial output from "info mtree":
I/O
0000000000000000-000000000000ffff (prio 0, RW): io
0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx
0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control
I sanity-checked the patch by booting a RHEL-6.3 guest and found no
problems. I summoned gdb and set a breakpoint on rcr_write() in order to
gather a bit more confidence. Relevant frames of the stack:
kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1,
count=1) [kvm-all.c:1422]
cpu_outb (addr=3321, val=6 '\006') [ioport.c:289]
ioport_write (index=0, address=3321, data=6) [ioport.c:83]
ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6)
[ioport.c:212]
memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0,
width=1, data=6) [memory.c:439]
access_with_adjusted_size (addr=0, value=0x7f3f531fbac0,
size=1, access_size_min=1,
access_size_max=4,
access=0x7f3f5f6e0f90
<memory_region_write_accessor>,
opaque=0x7f3f6227b668)
[memory.c:364]
memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0,
value=0x7f3f531fbac0, size=1,
shift=0, mask=255)
[memory.c:334]
rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1)
[hw/piix_pci.c:498]
The dispatch happens in ioport_write(); "index=0" means byte-wide access:
static void ioport_write(int index, uint32_t address, uint32_t data)
{
static IOPortWriteFunc * const default_func[3] = {
default_ioport_writeb,
default_ioport_writew,
default_ioport_writel
};
IOPortWriteFunc *func = ioport_write_table[index][address];
if (!func)
func = default_func[index];
func(ioport_opaque[address], address, data);
}
The "ioport_write_table" and "ioport_opaque" arrays describe the flattened
IO port space. The first array is less interesting (it selects a thunk
function). The "ioport_opaque" array is interesting because it decides how
writing to the port is implemented ultimately.
4-byte wide access to 0xcf8 (pci-conf-idx):
(gdb) print ioport_write_table[2][0xcf8]
$1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write
$2 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f5575cb <pci_host_config_write>
1-byte wide access to 0xcf9 (piix3-reset-control):
(gdb) print ioport_write_table[0][0xcf9]
$3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write
$4 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f6b42f1 <rcr_write>
The higher priority of "piix3-reset-control" ensures that the 0xcf9
entries in ioport_write_table / ioport_opaque will always belong to it,
independently of its relative registration order versus "pci-conf-idx".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
|
|
|
|
|
|
|
/* Reset Control Register contents */
|
|
|
|
uint8_t rcr;
|
|
|
|
|
|
|
|
/* IO memory region for Reset Control Register (RCR_IOPORT) */
|
|
|
|
MemoryRegion rcr_mem;
|
2009-09-16 22:25:33 +02:00
|
|
|
} PIIX3State;
|
2009-08-28 15:28:19 +02:00
|
|
|
|
2015-05-13 02:43:23 +02:00
|
|
|
#define TYPE_PIIX3_PCI_DEVICE "pci-piix3"
|
|
|
|
#define PIIX3_PCI_DEVICE(obj) \
|
|
|
|
OBJECT_CHECK(PIIX3State, (obj), TYPE_PIIX3_PCI_DEVICE)
|
|
|
|
|
2013-02-23 01:40:37 +01:00
|
|
|
#define I440FX_PCI_DEVICE(obj) \
|
|
|
|
OBJECT_CHECK(PCII440FXState, (obj), TYPE_I440FX_PCI_DEVICE)
|
|
|
|
|
2018-10-11 14:38:54 +02:00
|
|
|
#define TYPE_PIIX3_DEVICE "PIIX3"
|
|
|
|
#define TYPE_PIIX3_XEN_DEVICE "PIIX3-xen"
|
|
|
|
|
2009-08-28 15:28:15 +02:00
|
|
|
struct PCII440FXState {
|
2013-07-01 12:18:21 +02:00
|
|
|
/*< private >*/
|
|
|
|
PCIDevice parent_obj;
|
|
|
|
/*< public >*/
|
|
|
|
|
2011-08-15 16:17:38 +02:00
|
|
|
MemoryRegion *system_memory;
|
|
|
|
MemoryRegion *pci_address_space;
|
|
|
|
MemoryRegion *ram_memory;
|
|
|
|
PAMMemoryRegion pam_regions[13];
|
|
|
|
MemoryRegion smram_region;
|
2015-03-31 14:10:22 +02:00
|
|
|
MemoryRegion smram, low_smram;
|
2009-08-28 15:28:15 +02:00
|
|
|
};
|
|
|
|
|
2009-12-15 12:26:05 +01:00
|
|
|
|
|
|
|
#define I440FX_PAM 0x59
|
|
|
|
#define I440FX_PAM_SIZE 7
|
|
|
|
#define I440FX_SMRAM 0x72
|
|
|
|
|
2017-11-11 16:25:00 +01:00
|
|
|
/* Keep it 2G to comply with older win32 guests */
|
|
|
|
#define I440FX_PCI_HOST_HOLE64_SIZE_DEFAULT (1ULL << 31)
|
|
|
|
|
2015-08-07 21:15:31 +02:00
|
|
|
/* Older coreboot versions (4.0 and older) read a config register that doesn't
|
|
|
|
* exist in real hardware, to get the RAM size from QEMU.
|
|
|
|
*/
|
|
|
|
#define I440FX_COREBOOT_RAM_SIZE 0x57
|
|
|
|
|
2011-04-01 13:43:23 +02:00
|
|
|
static void piix3_set_irq(void *opaque, int pirq, int level);
|
2012-07-19 16:11:47 +02:00
|
|
|
static PCIINTxRoute piix3_route_intx_pin_to_irq(void *opaque, int pci_intx);
|
2011-06-15 18:36:56 +02:00
|
|
|
static void piix3_write_config_xen(PCIDevice *dev,
|
|
|
|
uint32_t address, uint32_t val, int len);
|
2006-09-24 02:16:34 +02:00
|
|
|
|
|
|
|
/* return the global irq number corresponding to a given device irq
|
|
|
|
pin. We could also use the bus number to have a more precise
|
|
|
|
mapping. */
|
2011-04-01 13:43:23 +02:00
|
|
|
static int pci_slot_get_pirq(PCIDevice *pci_dev, int pci_intx)
|
2006-09-24 02:16:34 +02:00
|
|
|
{
|
|
|
|
int slot_addend;
|
|
|
|
slot_addend = (pci_dev->devfn >> 3) - 1;
|
2011-04-01 13:43:23 +02:00
|
|
|
return (pci_intx + slot_addend) & 3;
|
2006-09-24 02:16:34 +02:00
|
|
|
}
|
2006-05-13 18:11:23 +02:00
|
|
|
|
2009-08-28 15:28:15 +02:00
|
|
|
static void i440fx_update_memory_mappings(PCII440FXState *d)
|
2006-09-24 20:49:13 +02:00
|
|
|
{
|
2012-11-14 21:54:02 +01:00
|
|
|
int i;
|
2013-07-01 12:18:21 +02:00
|
|
|
PCIDevice *pd = PCI_DEVICE(d);
|
2006-09-24 21:31:43 +02:00
|
|
|
|
2011-08-01 10:04:39 +02:00
|
|
|
memory_region_transaction_begin();
|
2018-10-11 14:14:03 +02:00
|
|
|
for (i = 0; i < ARRAY_SIZE(d->pam_regions); i++) {
|
2012-11-14 21:54:02 +01:00
|
|
|
pam_update(&d->pam_regions[i], i,
|
2018-07-05 17:58:10 +02:00
|
|
|
pd->config[I440FX_PAM + DIV_ROUND_UP(i, 2)]);
|
2006-09-24 20:49:13 +02:00
|
|
|
}
|
2015-03-31 14:14:28 +02:00
|
|
|
memory_region_set_enabled(&d->smram_region,
|
|
|
|
!(pd->config[I440FX_SMRAM] & SMRAM_D_OPEN));
|
2015-03-31 14:10:22 +02:00
|
|
|
memory_region_set_enabled(&d->smram,
|
|
|
|
pd->config[I440FX_SMRAM] & SMRAM_G_SMRAME);
|
2011-08-01 10:04:39 +02:00
|
|
|
memory_region_transaction_commit();
|
2006-09-24 20:49:13 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
2009-08-28 15:28:15 +02:00
|
|
|
static void i440fx_write_config(PCIDevice *dev,
|
2006-09-24 20:49:13 +02:00
|
|
|
uint32_t address, uint32_t val, int len)
|
|
|
|
{
|
2013-02-23 01:40:37 +01:00
|
|
|
PCII440FXState *d = I440FX_PCI_DEVICE(dev);
|
2009-08-28 15:28:15 +02:00
|
|
|
|
2006-09-24 20:49:13 +02:00
|
|
|
/* XXX: implement SMRAM.D_LOCK */
|
2009-08-28 15:28:15 +02:00
|
|
|
pci_default_write_config(dev, address, val, len);
|
2009-12-15 12:26:06 +01:00
|
|
|
if (ranges_overlap(address, len, I440FX_PAM, I440FX_PAM_SIZE) ||
|
|
|
|
range_covers_byte(address, len, I440FX_SMRAM)) {
|
2006-09-24 20:49:13 +02:00
|
|
|
i440fx_update_memory_mappings(d);
|
2009-12-15 12:26:06 +01:00
|
|
|
}
|
2006-09-24 20:49:13 +02:00
|
|
|
}
|
|
|
|
|
2009-08-28 15:28:26 +02:00
|
|
|
static int i440fx_load_old(QEMUFile* f, void *opaque, int version_id)
|
2006-09-24 20:49:13 +02:00
|
|
|
{
|
2009-08-28 15:28:15 +02:00
|
|
|
PCII440FXState *d = opaque;
|
2013-07-01 12:18:21 +02:00
|
|
|
PCIDevice *pd = PCI_DEVICE(d);
|
2007-12-10 00:56:13 +01:00
|
|
|
int ret, i;
|
2015-03-31 14:12:25 +02:00
|
|
|
uint8_t smm_enabled;
|
2006-09-24 20:49:13 +02:00
|
|
|
|
2013-07-01 12:18:21 +02:00
|
|
|
ret = pci_device_load(pd, f);
|
2006-09-24 20:49:13 +02:00
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
i440fx_update_memory_mappings(d);
|
2015-03-31 14:12:25 +02:00
|
|
|
qemu_get_8s(f, &smm_enabled);
|
2007-12-10 00:56:13 +01:00
|
|
|
|
2011-04-01 13:43:22 +02:00
|
|
|
if (version_id == 2) {
|
|
|
|
for (i = 0; i < PIIX_NUM_PIRQS; i++) {
|
|
|
|
qemu_get_be32(f); /* dummy load for compatibility */
|
|
|
|
}
|
|
|
|
}
|
2007-12-10 00:56:13 +01:00
|
|
|
|
2006-09-24 20:49:13 +02:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-09-29 22:48:21 +02:00
|
|
|
static int i440fx_post_load(void *opaque, int version_id)
|
2009-08-28 15:28:26 +02:00
|
|
|
{
|
|
|
|
PCII440FXState *d = opaque;
|
|
|
|
|
|
|
|
i440fx_update_memory_mappings(d);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const VMStateDescription vmstate_i440fx = {
|
|
|
|
.name = "I440FX",
|
|
|
|
.version_id = 3,
|
|
|
|
.minimum_version_id = 3,
|
|
|
|
.minimum_version_id_old = 1,
|
|
|
|
.load_state_old = i440fx_load_old,
|
2009-09-10 03:04:30 +02:00
|
|
|
.post_load = i440fx_post_load,
|
2014-04-16 15:32:32 +02:00
|
|
|
.fields = (VMStateField[]) {
|
2013-07-01 12:18:21 +02:00
|
|
|
VMSTATE_PCI_DEVICE(parent_obj, PCII440FXState),
|
2015-03-31 14:12:25 +02:00
|
|
|
/* Used to be smm_enabled, which was basically always zero because
|
|
|
|
* SeaBIOS hardly uses SMM. SMRAM is now handled by CPU code.
|
|
|
|
*/
|
|
|
|
VMSTATE_UNUSED(1),
|
2009-08-28 15:28:26 +02:00
|
|
|
VMSTATE_END_OF_LIST()
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
2013-07-29 16:47:57 +02:00
|
|
|
static void i440fx_pcihost_get_pci_hole_start(Object *obj, Visitor *v,
|
qom: Swap 'name' next to visitor in ObjectPropertyAccessor
Similar to the previous patch, it's nice to have all functions
in the tree that involve a visitor and a name for conversion to
or from QAPI to consistently stick the 'name' parameter next
to the Visitor parameter.
Done by manually changing include/qom/object.h and qom/object.c,
then running this Coccinelle script and touching up the fallout
(Coccinelle insisted on adding some trailing whitespace).
@ rule1 @
identifier fn;
typedef Object, Visitor, Error;
identifier obj, v, opaque, name, errp;
@@
void fn
- (Object *obj, Visitor *v, void *opaque, const char *name,
+ (Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp) { ... }
@@
identifier rule1.fn;
expression obj, v, opaque, name, errp;
@@
fn(obj, v,
- opaque, name,
+ name, opaque,
errp)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:55 +01:00
|
|
|
const char *name, void *opaque,
|
2013-07-29 16:47:57 +02:00
|
|
|
Error **errp)
|
|
|
|
{
|
|
|
|
I440FXState *s = I440FX_PCI_HOST_BRIDGE(obj);
|
2016-07-01 13:47:47 +02:00
|
|
|
uint64_t val64;
|
|
|
|
uint32_t value;
|
2013-07-29 16:47:57 +02:00
|
|
|
|
2016-07-01 13:47:47 +02:00
|
|
|
val64 = range_is_empty(&s->pci_hole) ? 0 : range_lob(&s->pci_hole);
|
|
|
|
value = val64;
|
|
|
|
assert(value == val64);
|
qapi: Swap visit_* arguments for consistent 'name' placement
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
|
|
|
visit_type_uint32(v, name, &value, errp);
|
2013-07-29 16:47:57 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static void i440fx_pcihost_get_pci_hole_end(Object *obj, Visitor *v,
|
qom: Swap 'name' next to visitor in ObjectPropertyAccessor
Similar to the previous patch, it's nice to have all functions
in the tree that involve a visitor and a name for conversion to
or from QAPI to consistently stick the 'name' parameter next
to the Visitor parameter.
Done by manually changing include/qom/object.h and qom/object.c,
then running this Coccinelle script and touching up the fallout
(Coccinelle insisted on adding some trailing whitespace).
@ rule1 @
identifier fn;
typedef Object, Visitor, Error;
identifier obj, v, opaque, name, errp;
@@
void fn
- (Object *obj, Visitor *v, void *opaque, const char *name,
+ (Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp) { ... }
@@
identifier rule1.fn;
expression obj, v, opaque, name, errp;
@@
fn(obj, v,
- opaque, name,
+ name, opaque,
errp)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:55 +01:00
|
|
|
const char *name, void *opaque,
|
2013-07-29 16:47:57 +02:00
|
|
|
Error **errp)
|
|
|
|
{
|
|
|
|
I440FXState *s = I440FX_PCI_HOST_BRIDGE(obj);
|
2016-07-01 13:47:47 +02:00
|
|
|
uint64_t val64;
|
|
|
|
uint32_t value;
|
2013-07-29 16:47:57 +02:00
|
|
|
|
2016-07-01 13:47:47 +02:00
|
|
|
val64 = range_is_empty(&s->pci_hole) ? 0 : range_upb(&s->pci_hole) + 1;
|
|
|
|
value = val64;
|
|
|
|
assert(value == val64);
|
qapi: Swap visit_* arguments for consistent 'name' placement
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
|
|
|
visit_type_uint32(v, name, &value, errp);
|
2013-07-29 16:47:57 +02:00
|
|
|
}
|
|
|
|
|
2017-11-11 16:25:00 +01:00
|
|
|
/*
|
|
|
|
* The 64bit PCI hole start is set by the Guest firmware
|
|
|
|
* as the address of the first 64bit PCI MEM resource.
|
|
|
|
* If no PCI device has resources on the 64bit area,
|
|
|
|
* the 64bit PCI hole will start after "over 4G RAM" and the
|
|
|
|
* reserved space for memory hotplug if any.
|
|
|
|
*/
|
2018-09-27 23:24:37 +02:00
|
|
|
static uint64_t i440fx_pcihost_get_pci_hole64_start_value(Object *obj)
|
2013-07-29 16:47:57 +02:00
|
|
|
{
|
2013-09-02 11:58:57 +02:00
|
|
|
PCIHostState *h = PCI_HOST_BRIDGE(obj);
|
2017-11-11 16:25:00 +01:00
|
|
|
I440FXState *s = I440FX_PCI_HOST_BRIDGE(obj);
|
2013-09-02 11:58:57 +02:00
|
|
|
Range w64;
|
2016-07-01 13:47:47 +02:00
|
|
|
uint64_t value;
|
2013-09-02 11:58:57 +02:00
|
|
|
|
|
|
|
pci_bus_get_w64_range(h->bus, &w64);
|
2016-07-01 13:47:47 +02:00
|
|
|
value = range_is_empty(&w64) ? 0 : range_lob(&w64);
|
2017-11-11 16:25:00 +01:00
|
|
|
if (!value && s->pci_hole64_fix) {
|
|
|
|
value = pc_pci_hole64_start();
|
|
|
|
}
|
2018-09-27 23:24:37 +02:00
|
|
|
return value;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void i440fx_pcihost_get_pci_hole64_start(Object *obj, Visitor *v,
|
|
|
|
const char *name,
|
|
|
|
void *opaque, Error **errp)
|
|
|
|
{
|
|
|
|
uint64_t hole64_start = i440fx_pcihost_get_pci_hole64_start_value(obj);
|
|
|
|
|
|
|
|
visit_type_uint64(v, name, &hole64_start, errp);
|
2013-07-29 16:47:57 +02:00
|
|
|
}
|
|
|
|
|
2017-11-11 16:25:00 +01:00
|
|
|
/*
|
|
|
|
* The 64bit PCI hole end is set by the Guest firmware
|
|
|
|
* as the address of the last 64bit PCI MEM resource.
|
|
|
|
* Then it is expanded to the PCI_HOST_PROP_PCI_HOLE64_SIZE
|
|
|
|
* that can be configured by the user.
|
|
|
|
*/
|
2013-07-29 16:47:57 +02:00
|
|
|
static void i440fx_pcihost_get_pci_hole64_end(Object *obj, Visitor *v,
|
qom: Swap 'name' next to visitor in ObjectPropertyAccessor
Similar to the previous patch, it's nice to have all functions
in the tree that involve a visitor and a name for conversion to
or from QAPI to consistently stick the 'name' parameter next
to the Visitor parameter.
Done by manually changing include/qom/object.h and qom/object.c,
then running this Coccinelle script and touching up the fallout
(Coccinelle insisted on adding some trailing whitespace).
@ rule1 @
identifier fn;
typedef Object, Visitor, Error;
identifier obj, v, opaque, name, errp;
@@
void fn
- (Object *obj, Visitor *v, void *opaque, const char *name,
+ (Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp) { ... }
@@
identifier rule1.fn;
expression obj, v, opaque, name, errp;
@@
fn(obj, v,
- opaque, name,
+ name, opaque,
errp)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:55 +01:00
|
|
|
const char *name, void *opaque,
|
2013-07-29 16:47:57 +02:00
|
|
|
Error **errp)
|
|
|
|
{
|
2013-09-02 11:58:57 +02:00
|
|
|
PCIHostState *h = PCI_HOST_BRIDGE(obj);
|
2017-11-11 16:25:00 +01:00
|
|
|
I440FXState *s = I440FX_PCI_HOST_BRIDGE(obj);
|
hw/pci-host/x86: extend the 64-bit PCI hole relative to the fw-assigned base
In commit 9fa99d2519cb ("hw/pci-host: Fix x86 Host Bridges 64bit PCI
hole", 2017-11-16), we meant to expose such a 64-bit PCI MMIO aperture in
the ACPI DSDT that would be at least as large as the new "pci-hole64-size"
property (2GB on i440fx, 32GB on q35). The goal was to offer "enough"
64-bit MMIO aperture to the guest OS for hotplug purposes.
In that commit, we added or modified five functions:
- pc_pci_hole64_start(): shared between i440fx and q35. Provides a default
64-bit base, which starts beyond the cold-plugged 64-bit RAM, and skips
the DIMM hotplug area too (if any).
- i440fx_pcihost_get_pci_hole64_start(), q35_host_get_pci_hole64_start():
board-specific 64-bit base property getters called abstractly by the
ACPI generator. Both of these fall back to pc_pci_hole64_start() if the
firmware didn't program any 64-bit hole (i.e. if the firmware didn't
assign a 64-bit GPA to any MMIO BAR on any device). Otherwise, they
honor the firmware's BAR assignments (i.e., they treat the lowest 64-bit
GPA programmed by the firmware as the base address for the aperture).
- i440fx_pcihost_get_pci_hole64_end(), q35_host_get_pci_hole64_end():
these intended to extend the aperture to our size recommendation,
calculated relative to the base of the aperture.
Despite the original intent, i440fx_pcihost_get_pci_hole64_end() and
q35_host_get_pci_hole64_end() currently only extend the aperture relative
to the default base (pc_pci_hole64_start()), ignoring any programming done
by the firmware. This means that our size recommendation may not be met.
Fix it by honoring the firmware's address assignments.
The strange extension sizes were spotted by Alex, in the log of a guest
kernel running on top of OVMF (which prefers to assign 64-bit GPAs to
64-bit BARs).
This change only affects DSDT generation, therefore no new compat property
is being introduced.
Using an i440fx OVMF guest with 5GB RAM, an example _CRS change is:
> @@ -881,9 +881,9 @@
> QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
> 0x0000000000000000, // Granularity
> 0x0000000800000000, // Range Minimum
> - 0x000000080001C0FF, // Range Maximum
> + 0x000000087FFFFFFF, // Range Maximum
> 0x0000000000000000, // Translation Offset
> - 0x000000000001C100, // Length
> + 0x0000000080000000, // Length
> ,, , AddressRangeMemory, TypeStatic)
> })
> Device (GPE0)
(On i440fx, the low RAM split is at 3GB, in this case. Therefore, with 5GB
guest RAM and no DIMM hotplug range, pc_pci_hole64_start() returns 4 +
(5-3) = 6 GB. Adding the 2GB extension to that yields 8GB, which is below
the firmware-programmed base of 32GB, before the patch. Therefore, before
the patch, the extension is ineffective. After the patch, we add the 2GB
extension to the firmware-programmed base, namely 32GB.)
Using a q35 OVMF guest with 5GB RAM, an example _CRS change is:
> @@ -3162,9 +3162,9 @@
> QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
> 0x0000000000000000, // Granularity
> 0x0000000800000000, // Range Minimum
> - 0x00000009BFFFFFFF, // Range Maximum
> + 0x0000000FFFFFFFFF, // Range Maximum
> 0x0000000000000000, // Translation Offset
> - 0x00000001C0000000, // Length
> + 0x0000000800000000, // Length
> ,, , AddressRangeMemory, TypeStatic)
> })
> Device (GPE0)
(On Q35, the low RAM split is at 2GB. Therefore, with 5GB guest RAM and no
DIMM hotplug range, pc_pci_hole64_start() returns 4 + (5-2) = 7 GB. Adding
the 32GB extension to that yields 39GB (0x0000_0009_BFFF_FFFF + 1), before
the patch. After the patch, we add the 32GB extension to the
firmware-programmed base, namely 32GB.)
The ACPI test data for the bios-tables-test case that we added earlier in
this series are corrected too, as follows:
> @@ -3339,9 +3339,9 @@
> QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
> 0x0000000000000000, // Granularity
> 0x0000000200000000, // Range Minimum
> - 0x00000009BFFFFFFF, // Range Maximum
> + 0x00000009FFFFFFFF, // Range Maximum
> 0x0000000000000000, // Translation Offset
> - 0x00000007C0000000, // Length
> + 0x0000000800000000, // Length
> ,, , AddressRangeMemory, TypeStatic)
> })
> Device (GPE0)
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Fixes: 9fa99d2519cbf71f871e46871df12cb446dc1c3e
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-09-27 23:24:38 +02:00
|
|
|
uint64_t hole64_start = i440fx_pcihost_get_pci_hole64_start_value(obj);
|
2013-09-02 11:58:57 +02:00
|
|
|
Range w64;
|
2017-11-11 16:25:00 +01:00
|
|
|
uint64_t value, hole64_end;
|
2013-09-02 11:58:57 +02:00
|
|
|
|
|
|
|
pci_bus_get_w64_range(h->bus, &w64);
|
2016-07-01 13:47:47 +02:00
|
|
|
value = range_is_empty(&w64) ? 0 : range_upb(&w64) + 1;
|
2017-11-11 16:25:00 +01:00
|
|
|
hole64_end = ROUND_UP(hole64_start + s->pci_hole64_size, 1ULL << 30);
|
|
|
|
if (s->pci_hole64_fix && value < hole64_end) {
|
|
|
|
value = hole64_end;
|
|
|
|
}
|
2016-07-01 13:47:47 +02:00
|
|
|
visit_type_uint64(v, name, &value, errp);
|
2013-07-29 16:47:57 +02:00
|
|
|
}
|
|
|
|
|
2013-07-01 12:18:20 +02:00
|
|
|
static void i440fx_pcihost_initfn(Object *obj)
|
2006-05-13 18:11:23 +02:00
|
|
|
{
|
2013-07-01 12:18:20 +02:00
|
|
|
PCIHostState *s = PCI_HOST_BRIDGE(obj);
|
2006-05-13 18:11:23 +02:00
|
|
|
|
2013-07-01 12:18:20 +02:00
|
|
|
memory_region_init_io(&s->conf_mem, obj, &pci_host_conf_le_ops, s,
|
2011-07-24 16:47:18 +02:00
|
|
|
"pci-conf-idx", 4);
|
2013-07-01 12:18:20 +02:00
|
|
|
memory_region_init_io(&s->data_mem, obj, &pci_host_data_le_ops, s,
|
2011-07-24 16:47:18 +02:00
|
|
|
"pci-conf-data", 4);
|
2013-07-29 16:47:57 +02:00
|
|
|
|
2017-06-07 18:36:06 +02:00
|
|
|
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE_START, "uint32",
|
2013-07-29 16:47:57 +02:00
|
|
|
i440fx_pcihost_get_pci_hole_start,
|
|
|
|
NULL, NULL, NULL, NULL);
|
|
|
|
|
2017-06-07 18:36:06 +02:00
|
|
|
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE_END, "uint32",
|
2013-07-29 16:47:57 +02:00
|
|
|
i440fx_pcihost_get_pci_hole_end,
|
|
|
|
NULL, NULL, NULL, NULL);
|
|
|
|
|
2017-06-07 18:36:06 +02:00
|
|
|
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE64_START, "uint64",
|
2013-07-29 16:47:57 +02:00
|
|
|
i440fx_pcihost_get_pci_hole64_start,
|
|
|
|
NULL, NULL, NULL, NULL);
|
|
|
|
|
2017-06-07 18:36:06 +02:00
|
|
|
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE64_END, "uint64",
|
2013-07-29 16:47:57 +02:00
|
|
|
i440fx_pcihost_get_pci_hole64_end,
|
|
|
|
NULL, NULL, NULL, NULL);
|
2013-07-01 12:18:20 +02:00
|
|
|
}
|
2006-05-13 18:11:23 +02:00
|
|
|
|
2013-07-01 12:18:20 +02:00
|
|
|
static void i440fx_pcihost_realize(DeviceState *dev, Error **errp)
|
|
|
|
{
|
|
|
|
PCIHostState *s = PCI_HOST_BRIDGE(dev);
|
|
|
|
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
|
|
|
|
|
|
|
|
sysbus_add_io(sbd, 0xcf8, &s->conf_mem);
|
|
|
|
sysbus_init_ioports(sbd, 0xcf8, 4);
|
|
|
|
|
|
|
|
sysbus_add_io(sbd, 0xcfc, &s->data_mem);
|
|
|
|
sysbus_init_ioports(sbd, 0xcfc, 4);
|
2018-10-17 18:52:56 +02:00
|
|
|
|
|
|
|
/* register i440fx 0xcf8 port as coalesced pio */
|
|
|
|
memory_region_set_flush_coalesced(&s->data_mem);
|
|
|
|
memory_region_add_coalescing(&s->conf_mem, 0, 4);
|
2009-07-22 15:17:01 +02:00
|
|
|
}
|
2006-05-13 18:11:23 +02:00
|
|
|
|
2015-01-19 15:52:30 +01:00
|
|
|
static void i440fx_realize(PCIDevice *dev, Error **errp)
|
2009-07-22 15:17:01 +02:00
|
|
|
{
|
2013-07-01 12:18:21 +02:00
|
|
|
dev->config[I440FX_SMRAM] = 0x02;
|
2015-11-13 07:55:48 +01:00
|
|
|
|
|
|
|
if (object_property_get_bool(qdev_get_machine(), "iommu", NULL)) {
|
2017-07-12 15:57:41 +02:00
|
|
|
warn_report("i440fx doesn't support emulated iommu");
|
2015-11-13 07:55:48 +01:00
|
|
|
}
|
2009-07-22 15:17:01 +02:00
|
|
|
}
|
|
|
|
|
2015-07-15 07:37:41 +02:00
|
|
|
PCIBus *i440fx_init(const char *host_type, const char *pci_type,
|
|
|
|
PCII440FXState **pi440fx_state,
|
2013-07-29 16:47:53 +02:00
|
|
|
int *piix3_devfn,
|
|
|
|
ISABus **isa_bus, qemu_irq *pic,
|
|
|
|
MemoryRegion *address_space_mem,
|
|
|
|
MemoryRegion *address_space_io,
|
|
|
|
ram_addr_t ram_size,
|
2013-12-21 03:02:50 +01:00
|
|
|
ram_addr_t below_4g_mem_size,
|
2013-07-29 16:47:57 +02:00
|
|
|
ram_addr_t above_4g_mem_size,
|
2013-07-29 16:47:53 +02:00
|
|
|
MemoryRegion *pci_address_space,
|
|
|
|
MemoryRegion *ram_memory)
|
2009-07-22 15:17:01 +02:00
|
|
|
{
|
|
|
|
DeviceState *dev;
|
|
|
|
PCIBus *b;
|
|
|
|
PCIDevice *d;
|
2012-08-20 19:08:08 +02:00
|
|
|
PCIHostState *s;
|
2009-09-16 22:25:33 +02:00
|
|
|
PIIX3State *piix3;
|
2011-08-15 16:17:38 +02:00
|
|
|
PCII440FXState *f;
|
2012-10-17 17:10:04 +02:00
|
|
|
unsigned i;
|
2013-07-29 16:47:57 +02:00
|
|
|
I440FXState *i440fx;
|
2009-07-22 15:17:01 +02:00
|
|
|
|
2015-07-15 07:37:41 +02:00
|
|
|
dev = qdev_create(NULL, host_type);
|
2012-08-20 19:08:08 +02:00
|
|
|
s = PCI_HOST_BRIDGE(dev);
|
2017-11-29 09:46:22 +01:00
|
|
|
b = pci_root_bus_new(dev, NULL, pci_address_space,
|
|
|
|
address_space_io, 0, TYPE_PCI_BUS);
|
2009-07-22 15:17:01 +02:00
|
|
|
s->bus = b;
|
2012-03-28 16:34:12 +02:00
|
|
|
object_property_add_child(qdev_get_machine(), "i440fx", OBJECT(dev), NULL);
|
2012-03-27 18:38:46 +02:00
|
|
|
qdev_init_nofail(dev);
|
2009-07-22 15:17:01 +02:00
|
|
|
|
2015-07-15 07:37:41 +02:00
|
|
|
d = pci_create_simple(b, 0, pci_type);
|
2013-02-23 01:40:37 +01:00
|
|
|
*pi440fx_state = I440FX_PCI_DEVICE(d);
|
2011-08-15 16:17:38 +02:00
|
|
|
f = *pi440fx_state;
|
|
|
|
f->system_memory = address_space_mem;
|
|
|
|
f->pci_address_space = pci_address_space;
|
|
|
|
f->ram_memory = ram_memory;
|
2013-07-29 16:47:57 +02:00
|
|
|
|
|
|
|
i440fx = I440FX_PCI_HOST_BRIDGE(dev);
|
2016-07-01 13:47:47 +02:00
|
|
|
range_set_bounds(&i440fx->pci_hole, below_4g_mem_size,
|
|
|
|
IO_APIC_DEFAULT_ADDRESS - 1);
|
2013-07-29 16:47:57 +02:00
|
|
|
|
2013-10-29 13:57:34 +01:00
|
|
|
/* setup pci memory mapping */
|
|
|
|
pc_pci_as_mapping_init(OBJECT(f), f->system_memory,
|
|
|
|
f->pci_address_space);
|
|
|
|
|
2015-03-31 14:10:22 +02:00
|
|
|
/* if *disabled* show SMRAM to all CPUs */
|
2013-06-07 03:25:08 +02:00
|
|
|
memory_region_init_alias(&f->smram_region, OBJECT(d), "smram-region",
|
2011-08-15 16:17:38 +02:00
|
|
|
f->pci_address_space, 0xa0000, 0x20000);
|
2011-12-04 19:06:16 +01:00
|
|
|
memory_region_add_subregion_overlap(f->system_memory, 0xa0000,
|
|
|
|
&f->smram_region, 1);
|
2015-03-31 14:10:22 +02:00
|
|
|
memory_region_set_enabled(&f->smram_region, true);
|
|
|
|
|
|
|
|
/* smram, as seen by SMM CPUs */
|
|
|
|
memory_region_init(&f->smram, OBJECT(d), "smram", 1ull << 32);
|
|
|
|
memory_region_set_enabled(&f->smram, true);
|
|
|
|
memory_region_init_alias(&f->low_smram, OBJECT(d), "smram-low",
|
2015-03-31 14:12:25 +02:00
|
|
|
f->ram_memory, 0xa0000, 0x20000);
|
2015-03-31 14:10:22 +02:00
|
|
|
memory_region_set_enabled(&f->low_smram, true);
|
|
|
|
memory_region_add_subregion(&f->smram, 0xa0000, &f->low_smram);
|
|
|
|
object_property_add_const_link(qdev_get_machine(), "smram",
|
|
|
|
OBJECT(&f->smram), &error_abort);
|
|
|
|
|
2013-06-25 12:33:01 +02:00
|
|
|
init_pam(dev, f->ram_memory, f->system_memory, f->pci_address_space,
|
2012-11-14 21:54:02 +01:00
|
|
|
&f->pam_regions[0], PAM_BIOS_BASE, PAM_BIOS_SIZE);
|
2018-10-11 14:14:03 +02:00
|
|
|
for (i = 0; i < ARRAY_SIZE(f->pam_regions) - 1; ++i) {
|
2013-06-25 12:33:01 +02:00
|
|
|
init_pam(dev, f->ram_memory, f->system_memory, f->pci_address_space,
|
2012-11-14 21:54:02 +01:00
|
|
|
&f->pam_regions[i+1], PAM_EXPAN_BASE + i * PAM_EXPAN_SIZE,
|
|
|
|
PAM_EXPAN_SIZE);
|
2012-10-17 17:10:04 +02:00
|
|
|
}
|
2009-07-22 15:17:01 +02:00
|
|
|
|
2011-06-15 18:36:56 +02:00
|
|
|
/* Xen supports additional interrupt routes from the PCI devices to
|
|
|
|
* the IOAPIC: the four pins of each PCI device on the bus are also
|
|
|
|
* connected to the IOAPIC directly.
|
|
|
|
* These additional routes can be discovered through ACPI. */
|
|
|
|
if (xen_enabled()) {
|
2015-05-13 02:43:23 +02:00
|
|
|
PCIDevice *pci_dev = pci_create_simple_multifunction(b,
|
2018-10-11 14:38:54 +02:00
|
|
|
-1, true, TYPE_PIIX3_XEN_DEVICE);
|
2015-05-13 02:43:23 +02:00
|
|
|
piix3 = PIIX3_PCI_DEVICE(pci_dev);
|
2011-06-15 18:36:56 +02:00
|
|
|
pci_bus_irqs(b, xen_piix3_set_irq, xen_pci_slot_get_pirq,
|
|
|
|
piix3, XEN_PIIX_NUM_PIRQS);
|
|
|
|
} else {
|
2015-05-13 02:43:23 +02:00
|
|
|
PCIDevice *pci_dev = pci_create_simple_multifunction(b,
|
2018-10-11 14:38:54 +02:00
|
|
|
-1, true, TYPE_PIIX3_DEVICE);
|
2015-05-13 02:43:23 +02:00
|
|
|
piix3 = PIIX3_PCI_DEVICE(pci_dev);
|
2011-06-15 18:36:56 +02:00
|
|
|
pci_bus_irqs(b, piix3_set_irq, pci_slot_get_pirq, piix3,
|
|
|
|
PIIX_NUM_PIRQS);
|
2012-07-19 16:11:47 +02:00
|
|
|
pci_bus_set_route_irq_fn(b, piix3_route_intx_pin_to_irq);
|
2011-06-15 18:36:56 +02:00
|
|
|
}
|
2009-09-16 22:25:33 +02:00
|
|
|
piix3->pic = pic;
|
2013-02-23 01:40:38 +01:00
|
|
|
*isa_bus = ISA_BUS(qdev_get_child_bus(DEVICE(piix3), "isa.0"));
|
2010-07-16 15:55:39 +02:00
|
|
|
|
2009-09-16 22:25:33 +02:00
|
|
|
*piix3_devfn = piix3->dev.devfn;
|
2009-08-28 15:28:20 +02:00
|
|
|
|
2010-04-20 20:48:06 +02:00
|
|
|
ram_size = ram_size / 8 / 1024 / 1024;
|
2013-07-01 12:18:21 +02:00
|
|
|
if (ram_size > 255) {
|
2010-04-20 20:48:06 +02:00
|
|
|
ram_size = 255;
|
2013-07-01 12:18:21 +02:00
|
|
|
}
|
2015-08-07 21:15:31 +02:00
|
|
|
d->config[I440FX_COREBOOT_RAM_SIZE] = ram_size;
|
2010-04-20 20:48:06 +02:00
|
|
|
|
2011-08-15 16:17:38 +02:00
|
|
|
i440fx_update_memory_mappings(f);
|
|
|
|
|
2006-05-13 18:11:23 +02:00
|
|
|
return b;
|
|
|
|
}
|
|
|
|
|
2013-07-24 17:56:11 +02:00
|
|
|
PCIBus *find_i440fx(void)
|
|
|
|
{
|
|
|
|
PCIHostState *s = OBJECT_CHECK(PCIHostState,
|
|
|
|
object_resolve_path("/machine/i440fx", NULL),
|
|
|
|
TYPE_PCI_HOST_BRIDGE);
|
|
|
|
return s ? s->bus : NULL;
|
|
|
|
}
|
|
|
|
|
2006-05-13 18:11:23 +02:00
|
|
|
/* PIIX3 PCI to ISA bridge */
|
2011-04-01 13:43:23 +02:00
|
|
|
static void piix3_set_irq_pic(PIIX3State *piix3, int pic_irq)
|
|
|
|
{
|
|
|
|
qemu_set_irq(piix3->pic[pic_irq],
|
|
|
|
!!(piix3->pic_levels &
|
2011-05-16 13:50:55 +02:00
|
|
|
(((1ULL << PIIX_NUM_PIRQS) - 1) <<
|
2011-04-01 13:43:23 +02:00
|
|
|
(pic_irq * PIIX_NUM_PIRQS))));
|
|
|
|
}
|
2006-05-13 18:11:23 +02:00
|
|
|
|
2014-08-28 13:19:19 +02:00
|
|
|
static void piix3_set_irq_level_internal(PIIX3State *piix3, int pirq, int level)
|
2011-04-01 13:43:23 +02:00
|
|
|
{
|
|
|
|
int pic_irq;
|
|
|
|
uint64_t mask;
|
|
|
|
|
|
|
|
pic_irq = piix3->dev.config[PIIX_PIRQC + pirq];
|
|
|
|
if (pic_irq >= PIIX_NUM_PIC_IRQS) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
mask = 1ULL << ((pic_irq * PIIX_NUM_PIRQS) + pirq);
|
|
|
|
piix3->pic_levels &= ~mask;
|
|
|
|
piix3->pic_levels |= mask * !!level;
|
2014-08-28 13:19:19 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static void piix3_set_irq_level(PIIX3State *piix3, int pirq, int level)
|
|
|
|
{
|
|
|
|
int pic_irq;
|
|
|
|
|
|
|
|
pic_irq = piix3->dev.config[PIIX_PIRQC + pirq];
|
|
|
|
if (pic_irq >= PIIX_NUM_PIC_IRQS) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
piix3_set_irq_level_internal(piix3, pirq, level);
|
2011-04-01 13:43:23 +02:00
|
|
|
|
2011-04-01 13:43:24 +02:00
|
|
|
piix3_set_irq_pic(piix3, pic_irq);
|
2011-04-01 13:43:23 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static void piix3_set_irq(void *opaque, int pirq, int level)
|
2006-05-13 18:11:23 +02:00
|
|
|
{
|
2009-09-16 22:25:33 +02:00
|
|
|
PIIX3State *piix3 = opaque;
|
2011-04-01 13:43:24 +02:00
|
|
|
piix3_set_irq_level(piix3, pirq, level);
|
2011-04-01 13:43:23 +02:00
|
|
|
}
|
2006-05-13 18:11:23 +02:00
|
|
|
|
2012-07-19 16:11:47 +02:00
|
|
|
static PCIINTxRoute piix3_route_intx_pin_to_irq(void *opaque, int pin)
|
|
|
|
{
|
|
|
|
PIIX3State *piix3 = opaque;
|
|
|
|
int irq = piix3->dev.config[PIIX_PIRQC + pin];
|
|
|
|
PCIINTxRoute route;
|
|
|
|
|
|
|
|
if (irq < PIIX_NUM_PIC_IRQS) {
|
|
|
|
route.mode = PCI_INTX_ENABLED;
|
|
|
|
route.irq = irq;
|
|
|
|
} else {
|
|
|
|
route.mode = PCI_INTX_DISABLED;
|
|
|
|
route.irq = -1;
|
|
|
|
}
|
|
|
|
return route;
|
|
|
|
}
|
|
|
|
|
2011-04-01 13:43:23 +02:00
|
|
|
/* irq routing is changed. so rebuild bitmap */
|
|
|
|
static void piix3_update_irq_levels(PIIX3State *piix3)
|
|
|
|
{
|
2017-11-29 09:46:27 +01:00
|
|
|
PCIBus *bus = pci_get_bus(&piix3->dev);
|
2011-04-01 13:43:23 +02:00
|
|
|
int pirq;
|
|
|
|
|
|
|
|
piix3->pic_levels = 0;
|
|
|
|
for (pirq = 0; pirq < PIIX_NUM_PIRQS; pirq++) {
|
2017-11-29 09:46:27 +01:00
|
|
|
piix3_set_irq_level(piix3, pirq, pci_bus_get_irq_level(bus, pirq));
|
2011-04-01 13:43:23 +02:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void piix3_write_config(PCIDevice *dev,
|
|
|
|
uint32_t address, uint32_t val, int len)
|
|
|
|
{
|
|
|
|
pci_default_write_config(dev, address, val, len);
|
|
|
|
if (ranges_overlap(address, len, PIIX_PIRQC, 4)) {
|
2015-05-13 02:43:23 +02:00
|
|
|
PIIX3State *piix3 = PIIX3_PCI_DEVICE(dev);
|
2011-04-01 13:43:23 +02:00
|
|
|
int pic_irq;
|
2012-07-02 14:38:47 +02:00
|
|
|
|
2017-11-29 09:46:27 +01:00
|
|
|
pci_bus_fire_intx_routing_notifier(pci_get_bus(&piix3->dev));
|
2011-04-01 13:43:23 +02:00
|
|
|
piix3_update_irq_levels(piix3);
|
|
|
|
for (pic_irq = 0; pic_irq < PIIX_NUM_PIC_IRQS; pic_irq++) {
|
|
|
|
piix3_set_irq_pic(piix3, pic_irq);
|
2006-09-24 02:16:34 +02:00
|
|
|
}
|
2006-05-13 18:11:23 +02:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2011-06-15 18:36:56 +02:00
|
|
|
static void piix3_write_config_xen(PCIDevice *dev,
|
|
|
|
uint32_t address, uint32_t val, int len)
|
|
|
|
{
|
|
|
|
xen_piix_pci_write_config_client(address, val, len);
|
|
|
|
piix3_write_config(dev, address, val, len);
|
|
|
|
}
|
|
|
|
|
2009-06-17 18:32:01 +02:00
|
|
|
static void piix3_reset(void *opaque)
|
2006-05-13 18:11:23 +02:00
|
|
|
{
|
2009-08-28 15:28:18 +02:00
|
|
|
PIIX3State *d = opaque;
|
|
|
|
uint8_t *pci_conf = d->dev.config;
|
2006-05-13 18:11:23 +02:00
|
|
|
|
2013-02-23 01:40:39 +01:00
|
|
|
pci_conf[0x04] = 0x07; /* master, memory and I/O */
|
2006-05-13 18:11:23 +02:00
|
|
|
pci_conf[0x05] = 0x00;
|
|
|
|
pci_conf[0x06] = 0x00;
|
2013-02-23 01:40:39 +01:00
|
|
|
pci_conf[0x07] = 0x02; /* PCI_status_devsel_medium */
|
2006-05-13 18:11:23 +02:00
|
|
|
pci_conf[0x4c] = 0x4d;
|
|
|
|
pci_conf[0x4e] = 0x03;
|
|
|
|
pci_conf[0x4f] = 0x00;
|
|
|
|
pci_conf[0x60] = 0x80;
|
2008-03-28 23:28:45 +01:00
|
|
|
pci_conf[0x61] = 0x80;
|
|
|
|
pci_conf[0x62] = 0x80;
|
|
|
|
pci_conf[0x63] = 0x80;
|
2006-05-13 18:11:23 +02:00
|
|
|
pci_conf[0x69] = 0x02;
|
|
|
|
pci_conf[0x70] = 0x80;
|
|
|
|
pci_conf[0x76] = 0x0c;
|
|
|
|
pci_conf[0x77] = 0x0c;
|
|
|
|
pci_conf[0x78] = 0x02;
|
|
|
|
pci_conf[0x79] = 0x00;
|
|
|
|
pci_conf[0x80] = 0x00;
|
|
|
|
pci_conf[0x82] = 0x00;
|
|
|
|
pci_conf[0xa0] = 0x08;
|
|
|
|
pci_conf[0xa2] = 0x00;
|
|
|
|
pci_conf[0xa3] = 0x00;
|
|
|
|
pci_conf[0xa4] = 0x00;
|
|
|
|
pci_conf[0xa5] = 0x00;
|
|
|
|
pci_conf[0xa6] = 0x00;
|
|
|
|
pci_conf[0xa7] = 0x00;
|
|
|
|
pci_conf[0xa8] = 0x0f;
|
|
|
|
pci_conf[0xaa] = 0x00;
|
|
|
|
pci_conf[0xab] = 0x00;
|
|
|
|
pci_conf[0xac] = 0x00;
|
|
|
|
pci_conf[0xae] = 0x00;
|
2011-04-01 13:43:23 +02:00
|
|
|
|
|
|
|
d->pic_levels = 0;
|
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set
Traditional PCI config space access is achieved by writing a 32 bit
value to io port 0xcf8 to identify the bus, device, function and config
register. Port 0xcfc then contains the register in question. But if you
write the appropriate pair of magic values to 0xcf9, the machine will
reboot. Spectacular! And not standardised in any way (certainly not part
of the PCI spec), so different chipsets may have different requirements.
Booo.
In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control
Register. Bit 1 (System Reset, SRST) would normally differentiate between
soft reset and hard reset, but we ignore the difference beyond allowing
the guest to read it back.
RHBZ reference: 890459
This patch introduces the following overlap between the preexistent
"pci-conf-idx" region and the "piix3-reset-control" region just being
added. Partial output from "info mtree":
I/O
0000000000000000-000000000000ffff (prio 0, RW): io
0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx
0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control
I sanity-checked the patch by booting a RHEL-6.3 guest and found no
problems. I summoned gdb and set a breakpoint on rcr_write() in order to
gather a bit more confidence. Relevant frames of the stack:
kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1,
count=1) [kvm-all.c:1422]
cpu_outb (addr=3321, val=6 '\006') [ioport.c:289]
ioport_write (index=0, address=3321, data=6) [ioport.c:83]
ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6)
[ioport.c:212]
memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0,
width=1, data=6) [memory.c:439]
access_with_adjusted_size (addr=0, value=0x7f3f531fbac0,
size=1, access_size_min=1,
access_size_max=4,
access=0x7f3f5f6e0f90
<memory_region_write_accessor>,
opaque=0x7f3f6227b668)
[memory.c:364]
memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0,
value=0x7f3f531fbac0, size=1,
shift=0, mask=255)
[memory.c:334]
rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1)
[hw/piix_pci.c:498]
The dispatch happens in ioport_write(); "index=0" means byte-wide access:
static void ioport_write(int index, uint32_t address, uint32_t data)
{
static IOPortWriteFunc * const default_func[3] = {
default_ioport_writeb,
default_ioport_writew,
default_ioport_writel
};
IOPortWriteFunc *func = ioport_write_table[index][address];
if (!func)
func = default_func[index];
func(ioport_opaque[address], address, data);
}
The "ioport_write_table" and "ioport_opaque" arrays describe the flattened
IO port space. The first array is less interesting (it selects a thunk
function). The "ioport_opaque" array is interesting because it decides how
writing to the port is implemented ultimately.
4-byte wide access to 0xcf8 (pci-conf-idx):
(gdb) print ioport_write_table[2][0xcf8]
$1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write
$2 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f5575cb <pci_host_config_write>
1-byte wide access to 0xcf9 (piix3-reset-control):
(gdb) print ioport_write_table[0][0xcf9]
$3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write
$4 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f6b42f1 <rcr_write>
The higher priority of "piix3-reset-control" ensures that the 0xcf9
entries in ioport_write_table / ioport_opaque will always belong to it,
independently of its relative registration order versus "pci-conf-idx".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
|
|
|
d->rcr = 0;
|
2011-04-01 13:43:23 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static int piix3_post_load(void *opaque, int version_id)
|
|
|
|
{
|
|
|
|
PIIX3State *piix3 = opaque;
|
2014-08-28 13:19:19 +02:00
|
|
|
int pirq;
|
|
|
|
|
|
|
|
/* Because the i8259 has not been deserialized yet, qemu_irq_raise
|
|
|
|
* might bring the system to a different state than the saved one;
|
|
|
|
* for example, the interrupt could be masked but the i8259 would
|
|
|
|
* not know that yet and would trigger an interrupt in the CPU.
|
|
|
|
*
|
|
|
|
* Here, we update irq levels without raising the interrupt.
|
|
|
|
* Interrupt state will be deserialized separately through the i8259.
|
|
|
|
*/
|
|
|
|
piix3->pic_levels = 0;
|
|
|
|
for (pirq = 0; pirq < PIIX_NUM_PIRQS; pirq++) {
|
|
|
|
piix3_set_irq_level_internal(piix3, pirq,
|
2017-11-29 09:46:27 +01:00
|
|
|
pci_bus_get_irq_level(pci_get_bus(&piix3->dev), pirq));
|
2014-08-28 13:19:19 +02:00
|
|
|
}
|
2011-04-01 13:43:23 +02:00
|
|
|
return 0;
|
2011-04-01 13:43:22 +02:00
|
|
|
}
|
2009-06-17 18:32:01 +02:00
|
|
|
|
2017-09-25 13:29:12 +02:00
|
|
|
static int piix3_pre_save(void *opaque)
|
2011-04-01 13:43:22 +02:00
|
|
|
{
|
|
|
|
int i;
|
|
|
|
PIIX3State *piix3 = opaque;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(piix3->pci_irq_levels_vmstate); i++) {
|
|
|
|
piix3->pci_irq_levels_vmstate[i] =
|
2017-11-29 09:46:27 +01:00
|
|
|
pci_bus_get_irq_level(pci_get_bus(&piix3->dev), i);
|
2011-04-01 13:43:22 +02:00
|
|
|
}
|
2017-09-25 13:29:12 +02:00
|
|
|
|
|
|
|
return 0;
|
2006-05-13 18:11:23 +02:00
|
|
|
}
|
|
|
|
|
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set
Traditional PCI config space access is achieved by writing a 32 bit
value to io port 0xcf8 to identify the bus, device, function and config
register. Port 0xcfc then contains the register in question. But if you
write the appropriate pair of magic values to 0xcf9, the machine will
reboot. Spectacular! And not standardised in any way (certainly not part
of the PCI spec), so different chipsets may have different requirements.
Booo.
In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control
Register. Bit 1 (System Reset, SRST) would normally differentiate between
soft reset and hard reset, but we ignore the difference beyond allowing
the guest to read it back.
RHBZ reference: 890459
This patch introduces the following overlap between the preexistent
"pci-conf-idx" region and the "piix3-reset-control" region just being
added. Partial output from "info mtree":
I/O
0000000000000000-000000000000ffff (prio 0, RW): io
0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx
0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control
I sanity-checked the patch by booting a RHEL-6.3 guest and found no
problems. I summoned gdb and set a breakpoint on rcr_write() in order to
gather a bit more confidence. Relevant frames of the stack:
kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1,
count=1) [kvm-all.c:1422]
cpu_outb (addr=3321, val=6 '\006') [ioport.c:289]
ioport_write (index=0, address=3321, data=6) [ioport.c:83]
ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6)
[ioport.c:212]
memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0,
width=1, data=6) [memory.c:439]
access_with_adjusted_size (addr=0, value=0x7f3f531fbac0,
size=1, access_size_min=1,
access_size_max=4,
access=0x7f3f5f6e0f90
<memory_region_write_accessor>,
opaque=0x7f3f6227b668)
[memory.c:364]
memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0,
value=0x7f3f531fbac0, size=1,
shift=0, mask=255)
[memory.c:334]
rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1)
[hw/piix_pci.c:498]
The dispatch happens in ioport_write(); "index=0" means byte-wide access:
static void ioport_write(int index, uint32_t address, uint32_t data)
{
static IOPortWriteFunc * const default_func[3] = {
default_ioport_writeb,
default_ioport_writew,
default_ioport_writel
};
IOPortWriteFunc *func = ioport_write_table[index][address];
if (!func)
func = default_func[index];
func(ioport_opaque[address], address, data);
}
The "ioport_write_table" and "ioport_opaque" arrays describe the flattened
IO port space. The first array is less interesting (it selects a thunk
function). The "ioport_opaque" array is interesting because it decides how
writing to the port is implemented ultimately.
4-byte wide access to 0xcf8 (pci-conf-idx):
(gdb) print ioport_write_table[2][0xcf8]
$1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write
$2 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f5575cb <pci_host_config_write>
1-byte wide access to 0xcf9 (piix3-reset-control):
(gdb) print ioport_write_table[0][0xcf9]
$3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write
$4 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f6b42f1 <rcr_write>
The higher priority of "piix3-reset-control" ensures that the 0xcf9
entries in ioport_write_table / ioport_opaque will always belong to it,
independently of its relative registration order versus "pci-conf-idx".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
|
|
|
static bool piix3_rcr_needed(void *opaque)
|
|
|
|
{
|
|
|
|
PIIX3State *piix3 = opaque;
|
|
|
|
|
|
|
|
return (piix3->rcr != 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const VMStateDescription vmstate_piix3_rcr = {
|
|
|
|
.name = "PIIX3/rcr",
|
|
|
|
.version_id = 1,
|
|
|
|
.minimum_version_id = 1,
|
2014-09-23 14:09:54 +02:00
|
|
|
.needed = piix3_rcr_needed,
|
2014-04-16 15:32:32 +02:00
|
|
|
.fields = (VMStateField[]) {
|
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set
Traditional PCI config space access is achieved by writing a 32 bit
value to io port 0xcf8 to identify the bus, device, function and config
register. Port 0xcfc then contains the register in question. But if you
write the appropriate pair of magic values to 0xcf9, the machine will
reboot. Spectacular! And not standardised in any way (certainly not part
of the PCI spec), so different chipsets may have different requirements.
Booo.
In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control
Register. Bit 1 (System Reset, SRST) would normally differentiate between
soft reset and hard reset, but we ignore the difference beyond allowing
the guest to read it back.
RHBZ reference: 890459
This patch introduces the following overlap between the preexistent
"pci-conf-idx" region and the "piix3-reset-control" region just being
added. Partial output from "info mtree":
I/O
0000000000000000-000000000000ffff (prio 0, RW): io
0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx
0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control
I sanity-checked the patch by booting a RHEL-6.3 guest and found no
problems. I summoned gdb and set a breakpoint on rcr_write() in order to
gather a bit more confidence. Relevant frames of the stack:
kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1,
count=1) [kvm-all.c:1422]
cpu_outb (addr=3321, val=6 '\006') [ioport.c:289]
ioport_write (index=0, address=3321, data=6) [ioport.c:83]
ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6)
[ioport.c:212]
memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0,
width=1, data=6) [memory.c:439]
access_with_adjusted_size (addr=0, value=0x7f3f531fbac0,
size=1, access_size_min=1,
access_size_max=4,
access=0x7f3f5f6e0f90
<memory_region_write_accessor>,
opaque=0x7f3f6227b668)
[memory.c:364]
memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0,
value=0x7f3f531fbac0, size=1,
shift=0, mask=255)
[memory.c:334]
rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1)
[hw/piix_pci.c:498]
The dispatch happens in ioport_write(); "index=0" means byte-wide access:
static void ioport_write(int index, uint32_t address, uint32_t data)
{
static IOPortWriteFunc * const default_func[3] = {
default_ioport_writeb,
default_ioport_writew,
default_ioport_writel
};
IOPortWriteFunc *func = ioport_write_table[index][address];
if (!func)
func = default_func[index];
func(ioport_opaque[address], address, data);
}
The "ioport_write_table" and "ioport_opaque" arrays describe the flattened
IO port space. The first array is less interesting (it selects a thunk
function). The "ioport_opaque" array is interesting because it decides how
writing to the port is implemented ultimately.
4-byte wide access to 0xcf8 (pci-conf-idx):
(gdb) print ioport_write_table[2][0xcf8]
$1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write
$2 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f5575cb <pci_host_config_write>
1-byte wide access to 0xcf9 (piix3-reset-control):
(gdb) print ioport_write_table[0][0xcf9]
$3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write
$4 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f6b42f1 <rcr_write>
The higher priority of "piix3-reset-control" ensures that the 0xcf9
entries in ioport_write_table / ioport_opaque will always belong to it,
independently of its relative registration order versus "pci-conf-idx".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
|
|
|
VMSTATE_UINT8(rcr, PIIX3State),
|
|
|
|
VMSTATE_END_OF_LIST()
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
2009-08-28 15:28:27 +02:00
|
|
|
static const VMStateDescription vmstate_piix3 = {
|
|
|
|
.name = "PIIX3",
|
|
|
|
.version_id = 3,
|
|
|
|
.minimum_version_id = 2,
|
2011-04-01 13:43:23 +02:00
|
|
|
.post_load = piix3_post_load,
|
2011-04-01 13:43:22 +02:00
|
|
|
.pre_save = piix3_pre_save,
|
2014-04-16 15:32:32 +02:00
|
|
|
.fields = (VMStateField[]) {
|
2009-08-28 15:28:27 +02:00
|
|
|
VMSTATE_PCI_DEVICE(dev, PIIX3State),
|
2011-04-01 13:43:22 +02:00
|
|
|
VMSTATE_INT32_ARRAY_V(pci_irq_levels_vmstate, PIIX3State,
|
|
|
|
PIIX_NUM_PIRQS, 3),
|
2009-08-28 15:28:27 +02:00
|
|
|
VMSTATE_END_OF_LIST()
|
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set
Traditional PCI config space access is achieved by writing a 32 bit
value to io port 0xcf8 to identify the bus, device, function and config
register. Port 0xcfc then contains the register in question. But if you
write the appropriate pair of magic values to 0xcf9, the machine will
reboot. Spectacular! And not standardised in any way (certainly not part
of the PCI spec), so different chipsets may have different requirements.
Booo.
In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control
Register. Bit 1 (System Reset, SRST) would normally differentiate between
soft reset and hard reset, but we ignore the difference beyond allowing
the guest to read it back.
RHBZ reference: 890459
This patch introduces the following overlap between the preexistent
"pci-conf-idx" region and the "piix3-reset-control" region just being
added. Partial output from "info mtree":
I/O
0000000000000000-000000000000ffff (prio 0, RW): io
0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx
0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control
I sanity-checked the patch by booting a RHEL-6.3 guest and found no
problems. I summoned gdb and set a breakpoint on rcr_write() in order to
gather a bit more confidence. Relevant frames of the stack:
kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1,
count=1) [kvm-all.c:1422]
cpu_outb (addr=3321, val=6 '\006') [ioport.c:289]
ioport_write (index=0, address=3321, data=6) [ioport.c:83]
ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6)
[ioport.c:212]
memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0,
width=1, data=6) [memory.c:439]
access_with_adjusted_size (addr=0, value=0x7f3f531fbac0,
size=1, access_size_min=1,
access_size_max=4,
access=0x7f3f5f6e0f90
<memory_region_write_accessor>,
opaque=0x7f3f6227b668)
[memory.c:364]
memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0,
value=0x7f3f531fbac0, size=1,
shift=0, mask=255)
[memory.c:334]
rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1)
[hw/piix_pci.c:498]
The dispatch happens in ioport_write(); "index=0" means byte-wide access:
static void ioport_write(int index, uint32_t address, uint32_t data)
{
static IOPortWriteFunc * const default_func[3] = {
default_ioport_writeb,
default_ioport_writew,
default_ioport_writel
};
IOPortWriteFunc *func = ioport_write_table[index][address];
if (!func)
func = default_func[index];
func(ioport_opaque[address], address, data);
}
The "ioport_write_table" and "ioport_opaque" arrays describe the flattened
IO port space. The first array is less interesting (it selects a thunk
function). The "ioport_opaque" array is interesting because it decides how
writing to the port is implemented ultimately.
4-byte wide access to 0xcf8 (pci-conf-idx):
(gdb) print ioport_write_table[2][0xcf8]
$1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write
$2 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f5575cb <pci_host_config_write>
1-byte wide access to 0xcf9 (piix3-reset-control):
(gdb) print ioport_write_table[0][0xcf9]
$3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write
$4 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f6b42f1 <rcr_write>
The higher priority of "piix3-reset-control" ensures that the 0xcf9
entries in ioport_write_table / ioport_opaque will always belong to it,
independently of its relative registration order versus "pci-conf-idx".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
|
|
|
},
|
2014-09-23 14:09:54 +02:00
|
|
|
.subsections = (const VMStateDescription*[]) {
|
|
|
|
&vmstate_piix3_rcr,
|
|
|
|
NULL
|
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set
Traditional PCI config space access is achieved by writing a 32 bit
value to io port 0xcf8 to identify the bus, device, function and config
register. Port 0xcfc then contains the register in question. But if you
write the appropriate pair of magic values to 0xcf9, the machine will
reboot. Spectacular! And not standardised in any way (certainly not part
of the PCI spec), so different chipsets may have different requirements.
Booo.
In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control
Register. Bit 1 (System Reset, SRST) would normally differentiate between
soft reset and hard reset, but we ignore the difference beyond allowing
the guest to read it back.
RHBZ reference: 890459
This patch introduces the following overlap between the preexistent
"pci-conf-idx" region and the "piix3-reset-control" region just being
added. Partial output from "info mtree":
I/O
0000000000000000-000000000000ffff (prio 0, RW): io
0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx
0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control
I sanity-checked the patch by booting a RHEL-6.3 guest and found no
problems. I summoned gdb and set a breakpoint on rcr_write() in order to
gather a bit more confidence. Relevant frames of the stack:
kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1,
count=1) [kvm-all.c:1422]
cpu_outb (addr=3321, val=6 '\006') [ioport.c:289]
ioport_write (index=0, address=3321, data=6) [ioport.c:83]
ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6)
[ioport.c:212]
memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0,
width=1, data=6) [memory.c:439]
access_with_adjusted_size (addr=0, value=0x7f3f531fbac0,
size=1, access_size_min=1,
access_size_max=4,
access=0x7f3f5f6e0f90
<memory_region_write_accessor>,
opaque=0x7f3f6227b668)
[memory.c:364]
memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0,
value=0x7f3f531fbac0, size=1,
shift=0, mask=255)
[memory.c:334]
rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1)
[hw/piix_pci.c:498]
The dispatch happens in ioport_write(); "index=0" means byte-wide access:
static void ioport_write(int index, uint32_t address, uint32_t data)
{
static IOPortWriteFunc * const default_func[3] = {
default_ioport_writeb,
default_ioport_writew,
default_ioport_writel
};
IOPortWriteFunc *func = ioport_write_table[index][address];
if (!func)
func = default_func[index];
func(ioport_opaque[address], address, data);
}
The "ioport_write_table" and "ioport_opaque" arrays describe the flattened
IO port space. The first array is less interesting (it selects a thunk
function). The "ioport_opaque" array is interesting because it decides how
writing to the port is implemented ultimately.
4-byte wide access to 0xcf8 (pci-conf-idx):
(gdb) print ioport_write_table[2][0xcf8]
$1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write
$2 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f5575cb <pci_host_config_write>
1-byte wide access to 0xcf9 (piix3-reset-control):
(gdb) print ioport_write_table[0][0xcf9]
$3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write
$4 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f6b42f1 <rcr_write>
The higher priority of "piix3-reset-control" ensures that the 0xcf9
entries in ioport_write_table / ioport_opaque will always belong to it,
independently of its relative registration order versus "pci-conf-idx".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
static void rcr_write(void *opaque, hwaddr addr, uint64_t val, unsigned len)
|
|
|
|
{
|
|
|
|
PIIX3State *d = opaque;
|
|
|
|
|
|
|
|
if (val & 4) {
|
2017-05-15 23:41:13 +02:00
|
|
|
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
|
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set
Traditional PCI config space access is achieved by writing a 32 bit
value to io port 0xcf8 to identify the bus, device, function and config
register. Port 0xcfc then contains the register in question. But if you
write the appropriate pair of magic values to 0xcf9, the machine will
reboot. Spectacular! And not standardised in any way (certainly not part
of the PCI spec), so different chipsets may have different requirements.
Booo.
In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control
Register. Bit 1 (System Reset, SRST) would normally differentiate between
soft reset and hard reset, but we ignore the difference beyond allowing
the guest to read it back.
RHBZ reference: 890459
This patch introduces the following overlap between the preexistent
"pci-conf-idx" region and the "piix3-reset-control" region just being
added. Partial output from "info mtree":
I/O
0000000000000000-000000000000ffff (prio 0, RW): io
0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx
0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control
I sanity-checked the patch by booting a RHEL-6.3 guest and found no
problems. I summoned gdb and set a breakpoint on rcr_write() in order to
gather a bit more confidence. Relevant frames of the stack:
kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1,
count=1) [kvm-all.c:1422]
cpu_outb (addr=3321, val=6 '\006') [ioport.c:289]
ioport_write (index=0, address=3321, data=6) [ioport.c:83]
ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6)
[ioport.c:212]
memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0,
width=1, data=6) [memory.c:439]
access_with_adjusted_size (addr=0, value=0x7f3f531fbac0,
size=1, access_size_min=1,
access_size_max=4,
access=0x7f3f5f6e0f90
<memory_region_write_accessor>,
opaque=0x7f3f6227b668)
[memory.c:364]
memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0,
value=0x7f3f531fbac0, size=1,
shift=0, mask=255)
[memory.c:334]
rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1)
[hw/piix_pci.c:498]
The dispatch happens in ioport_write(); "index=0" means byte-wide access:
static void ioport_write(int index, uint32_t address, uint32_t data)
{
static IOPortWriteFunc * const default_func[3] = {
default_ioport_writeb,
default_ioport_writew,
default_ioport_writel
};
IOPortWriteFunc *func = ioport_write_table[index][address];
if (!func)
func = default_func[index];
func(ioport_opaque[address], address, data);
}
The "ioport_write_table" and "ioport_opaque" arrays describe the flattened
IO port space. The first array is less interesting (it selects a thunk
function). The "ioport_opaque" array is interesting because it decides how
writing to the port is implemented ultimately.
4-byte wide access to 0xcf8 (pci-conf-idx):
(gdb) print ioport_write_table[2][0xcf8]
$1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write
$2 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f5575cb <pci_host_config_write>
1-byte wide access to 0xcf9 (piix3-reset-control):
(gdb) print ioport_write_table[0][0xcf9]
$3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write
$4 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f6b42f1 <rcr_write>
The higher priority of "piix3-reset-control" ensures that the 0xcf9
entries in ioport_write_table / ioport_opaque will always belong to it,
independently of its relative registration order versus "pci-conf-idx".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
|
|
|
return;
|
2009-08-28 15:28:24 +02:00
|
|
|
}
|
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set
Traditional PCI config space access is achieved by writing a 32 bit
value to io port 0xcf8 to identify the bus, device, function and config
register. Port 0xcfc then contains the register in question. But if you
write the appropriate pair of magic values to 0xcf9, the machine will
reboot. Spectacular! And not standardised in any way (certainly not part
of the PCI spec), so different chipsets may have different requirements.
Booo.
In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control
Register. Bit 1 (System Reset, SRST) would normally differentiate between
soft reset and hard reset, but we ignore the difference beyond allowing
the guest to read it back.
RHBZ reference: 890459
This patch introduces the following overlap between the preexistent
"pci-conf-idx" region and the "piix3-reset-control" region just being
added. Partial output from "info mtree":
I/O
0000000000000000-000000000000ffff (prio 0, RW): io
0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx
0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control
I sanity-checked the patch by booting a RHEL-6.3 guest and found no
problems. I summoned gdb and set a breakpoint on rcr_write() in order to
gather a bit more confidence. Relevant frames of the stack:
kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1,
count=1) [kvm-all.c:1422]
cpu_outb (addr=3321, val=6 '\006') [ioport.c:289]
ioport_write (index=0, address=3321, data=6) [ioport.c:83]
ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6)
[ioport.c:212]
memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0,
width=1, data=6) [memory.c:439]
access_with_adjusted_size (addr=0, value=0x7f3f531fbac0,
size=1, access_size_min=1,
access_size_max=4,
access=0x7f3f5f6e0f90
<memory_region_write_accessor>,
opaque=0x7f3f6227b668)
[memory.c:364]
memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0,
value=0x7f3f531fbac0, size=1,
shift=0, mask=255)
[memory.c:334]
rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1)
[hw/piix_pci.c:498]
The dispatch happens in ioport_write(); "index=0" means byte-wide access:
static void ioport_write(int index, uint32_t address, uint32_t data)
{
static IOPortWriteFunc * const default_func[3] = {
default_ioport_writeb,
default_ioport_writew,
default_ioport_writel
};
IOPortWriteFunc *func = ioport_write_table[index][address];
if (!func)
func = default_func[index];
func(ioport_opaque[address], address, data);
}
The "ioport_write_table" and "ioport_opaque" arrays describe the flattened
IO port space. The first array is less interesting (it selects a thunk
function). The "ioport_opaque" array is interesting because it decides how
writing to the port is implemented ultimately.
4-byte wide access to 0xcf8 (pci-conf-idx):
(gdb) print ioport_write_table[2][0xcf8]
$1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write
$2 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f5575cb <pci_host_config_write>
1-byte wide access to 0xcf9 (piix3-reset-control):
(gdb) print ioport_write_table[0][0xcf9]
$3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write
$4 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f6b42f1 <rcr_write>
The higher priority of "piix3-reset-control" ensures that the 0xcf9
entries in ioport_write_table / ioport_opaque will always belong to it,
independently of its relative registration order versus "pci-conf-idx".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
|
|
|
d->rcr = val & 2; /* keep System Reset type only */
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint64_t rcr_read(void *opaque, hwaddr addr, unsigned len)
|
|
|
|
{
|
|
|
|
PIIX3State *d = opaque;
|
|
|
|
|
|
|
|
return d->rcr;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const MemoryRegionOps rcr_ops = {
|
|
|
|
.read = rcr_read,
|
|
|
|
.write = rcr_write,
|
|
|
|
.endianness = DEVICE_LITTLE_ENDIAN
|
2009-08-28 15:28:27 +02:00
|
|
|
};
|
2006-08-17 12:46:34 +02:00
|
|
|
|
2015-01-19 15:52:30 +01:00
|
|
|
static void piix3_realize(PCIDevice *dev, Error **errp)
|
2006-05-13 18:11:23 +02:00
|
|
|
{
|
2015-05-13 02:43:23 +02:00
|
|
|
PIIX3State *d = PIIX3_PCI_DEVICE(dev);
|
2006-05-13 18:11:23 +02:00
|
|
|
|
isa: Clean up error handling around isa_bus_new()
We can have at most one ISA bus. If you try to create another one,
isa_bus_new() complains to stderr and returns null.
isa_bus_new() is called in two contexts, machine's init() and device's
realize() methods. Since complaining to stderr is not proper in the
latter context, convert isa_bus_new() to Error.
Machine's init():
* mips_jazz_init(), called from the init() methods of machines
"magnum" and "pica"
* mips_r4k_init(), the init() method of machine "mips"
* pc_init1() called from the init() methods of non-q35 PC machines
* typhoon_init(), called from clipper_init(), the init() method of
machine "clipper"
These callers always create the first ISA bus, hence isa_bus_new()
can't fail. Simply pass &error_abort.
Device's realize():
* i82378_realize(), of PCI device "i82378"
* ich9_lpc_realize(), of PCI device "ICH9-LPC"
* pci_ebus_realize(), of PCI device "ebus"
* piix3_realize(), of PCI device "pci-piix3", abstract parent of
"PIIX3" and "PIIX3-xen"
* piix4_realize(), of PCI device "PIIX4"
* vt82c686b_realize(), of PCI device "VT82C686B"
Propagate the error. Note that these devices are typically created
only by machine init() methods with qdev_init_nofail() or similar. If
we screwed up and created an ISA bus before that call, we now give up
right away. Before, we'd hobble on, and typically die in
isa_bus_irqs(). Similar if someone finds a way to hot-plug one of
these critters.
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1450370121-5768-11-git-send-email-armbru@redhat.com>
2015-12-17 17:35:18 +01:00
|
|
|
if (!isa_bus_new(DEVICE(d), get_system_memory(),
|
|
|
|
pci_address_space_io(dev), errp)) {
|
|
|
|
return;
|
|
|
|
}
|
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set
Traditional PCI config space access is achieved by writing a 32 bit
value to io port 0xcf8 to identify the bus, device, function and config
register. Port 0xcfc then contains the register in question. But if you
write the appropriate pair of magic values to 0xcf9, the machine will
reboot. Spectacular! And not standardised in any way (certainly not part
of the PCI spec), so different chipsets may have different requirements.
Booo.
In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control
Register. Bit 1 (System Reset, SRST) would normally differentiate between
soft reset and hard reset, but we ignore the difference beyond allowing
the guest to read it back.
RHBZ reference: 890459
This patch introduces the following overlap between the preexistent
"pci-conf-idx" region and the "piix3-reset-control" region just being
added. Partial output from "info mtree":
I/O
0000000000000000-000000000000ffff (prio 0, RW): io
0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx
0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control
I sanity-checked the patch by booting a RHEL-6.3 guest and found no
problems. I summoned gdb and set a breakpoint on rcr_write() in order to
gather a bit more confidence. Relevant frames of the stack:
kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1,
count=1) [kvm-all.c:1422]
cpu_outb (addr=3321, val=6 '\006') [ioport.c:289]
ioport_write (index=0, address=3321, data=6) [ioport.c:83]
ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6)
[ioport.c:212]
memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0,
width=1, data=6) [memory.c:439]
access_with_adjusted_size (addr=0, value=0x7f3f531fbac0,
size=1, access_size_min=1,
access_size_max=4,
access=0x7f3f5f6e0f90
<memory_region_write_accessor>,
opaque=0x7f3f6227b668)
[memory.c:364]
memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0,
value=0x7f3f531fbac0, size=1,
shift=0, mask=255)
[memory.c:334]
rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1)
[hw/piix_pci.c:498]
The dispatch happens in ioport_write(); "index=0" means byte-wide access:
static void ioport_write(int index, uint32_t address, uint32_t data)
{
static IOPortWriteFunc * const default_func[3] = {
default_ioport_writeb,
default_ioport_writew,
default_ioport_writel
};
IOPortWriteFunc *func = ioport_write_table[index][address];
if (!func)
func = default_func[index];
func(ioport_opaque[address], address, data);
}
The "ioport_write_table" and "ioport_opaque" arrays describe the flattened
IO port space. The first array is less interesting (it selects a thunk
function). The "ioport_opaque" array is interesting because it decides how
writing to the port is implemented ultimately.
4-byte wide access to 0xcf8 (pci-conf-idx):
(gdb) print ioport_write_table[2][0xcf8]
$1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write
$2 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f5575cb <pci_host_config_write>
1-byte wide access to 0xcf9 (piix3-reset-control):
(gdb) print ioport_write_table[0][0xcf9]
$3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write
$4 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f6b42f1 <rcr_write>
The higher priority of "piix3-reset-control" ensures that the 0xcf9
entries in ioport_write_table / ioport_opaque will always belong to it,
independently of its relative registration order versus "pci-conf-idx".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
|
|
|
|
2013-06-07 03:25:08 +02:00
|
|
|
memory_region_init_io(&d->rcr_mem, OBJECT(dev), &rcr_ops, d,
|
|
|
|
"piix3-reset-control", 1);
|
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set
Traditional PCI config space access is achieved by writing a 32 bit
value to io port 0xcf8 to identify the bus, device, function and config
register. Port 0xcfc then contains the register in question. But if you
write the appropriate pair of magic values to 0xcf9, the machine will
reboot. Spectacular! And not standardised in any way (certainly not part
of the PCI spec), so different chipsets may have different requirements.
Booo.
In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control
Register. Bit 1 (System Reset, SRST) would normally differentiate between
soft reset and hard reset, but we ignore the difference beyond allowing
the guest to read it back.
RHBZ reference: 890459
This patch introduces the following overlap between the preexistent
"pci-conf-idx" region and the "piix3-reset-control" region just being
added. Partial output from "info mtree":
I/O
0000000000000000-000000000000ffff (prio 0, RW): io
0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx
0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control
I sanity-checked the patch by booting a RHEL-6.3 guest and found no
problems. I summoned gdb and set a breakpoint on rcr_write() in order to
gather a bit more confidence. Relevant frames of the stack:
kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1,
count=1) [kvm-all.c:1422]
cpu_outb (addr=3321, val=6 '\006') [ioport.c:289]
ioport_write (index=0, address=3321, data=6) [ioport.c:83]
ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6)
[ioport.c:212]
memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0,
width=1, data=6) [memory.c:439]
access_with_adjusted_size (addr=0, value=0x7f3f531fbac0,
size=1, access_size_min=1,
access_size_max=4,
access=0x7f3f5f6e0f90
<memory_region_write_accessor>,
opaque=0x7f3f6227b668)
[memory.c:364]
memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0,
value=0x7f3f531fbac0, size=1,
shift=0, mask=255)
[memory.c:334]
rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1)
[hw/piix_pci.c:498]
The dispatch happens in ioport_write(); "index=0" means byte-wide access:
static void ioport_write(int index, uint32_t address, uint32_t data)
{
static IOPortWriteFunc * const default_func[3] = {
default_ioport_writeb,
default_ioport_writew,
default_ioport_writel
};
IOPortWriteFunc *func = ioport_write_table[index][address];
if (!func)
func = default_func[index];
func(ioport_opaque[address], address, data);
}
The "ioport_write_table" and "ioport_opaque" arrays describe the flattened
IO port space. The first array is less interesting (it selects a thunk
function). The "ioport_opaque" array is interesting because it decides how
writing to the port is implemented ultimately.
4-byte wide access to 0xcf8 (pci-conf-idx):
(gdb) print ioport_write_table[2][0xcf8]
$1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write
$2 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f5575cb <pci_host_config_write>
1-byte wide access to 0xcf9 (piix3-reset-control):
(gdb) print ioport_write_table[0][0xcf9]
$3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write
$4 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f6b42f1 <rcr_write>
The higher priority of "piix3-reset-control" ensures that the 0xcf9
entries in ioport_write_table / ioport_opaque will always belong to it,
independently of its relative registration order versus "pci-conf-idx".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-24 10:31:20 +01:00
|
|
|
memory_region_add_subregion_overlap(pci_address_space_io(dev), RCR_IOPORT,
|
|
|
|
&d->rcr_mem, 1);
|
|
|
|
|
2009-06-27 09:25:07 +02:00
|
|
|
qemu_register_reset(piix3_reset, d);
|
2006-05-13 18:11:23 +02:00
|
|
|
}
|
2007-01-15 18:08:08 +01:00
|
|
|
|
2015-05-13 02:43:23 +02:00
|
|
|
static void pci_piix3_class_init(ObjectClass *klass, void *data)
|
2011-12-04 19:22:06 +01:00
|
|
|
{
|
2011-12-08 04:34:16 +01:00
|
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
2011-12-04 19:22:06 +01:00
|
|
|
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
|
|
|
|
|
2011-12-08 04:34:16 +01:00
|
|
|
dc->desc = "ISA bridge";
|
|
|
|
dc->vmsd = &vmstate_piix3;
|
2014-02-05 16:36:48 +01:00
|
|
|
dc->hotpluggable = false;
|
2015-01-19 15:52:30 +01:00
|
|
|
k->realize = piix3_realize;
|
2011-12-04 19:22:06 +01:00
|
|
|
k->vendor_id = PCI_VENDOR_ID_INTEL;
|
2013-02-23 01:40:39 +01:00
|
|
|
/* 82371SB PIIX3 PCI-to-ISA bridge (Step A1) */
|
|
|
|
k->device_id = PCI_DEVICE_ID_INTEL_82371SB_0;
|
2011-12-04 19:22:06 +01:00
|
|
|
k->class_id = PCI_CLASS_BRIDGE_ISA;
|
2013-11-28 17:27:00 +01:00
|
|
|
/*
|
|
|
|
* Reason: part of PIIX3 southbridge, needs to be wired up by
|
|
|
|
* pc_piix.c's pc_init1()
|
|
|
|
*/
|
2017-05-03 22:35:44 +02:00
|
|
|
dc->user_creatable = false;
|
2011-12-04 19:22:06 +01:00
|
|
|
}
|
|
|
|
|
2015-05-13 02:43:23 +02:00
|
|
|
static const TypeInfo piix3_pci_type_info = {
|
|
|
|
.name = TYPE_PIIX3_PCI_DEVICE,
|
|
|
|
.parent = TYPE_PCI_DEVICE,
|
|
|
|
.instance_size = sizeof(PIIX3State),
|
|
|
|
.abstract = true,
|
|
|
|
.class_init = pci_piix3_class_init,
|
2017-09-27 21:56:34 +02:00
|
|
|
.interfaces = (InterfaceInfo[]) {
|
|
|
|
{ INTERFACE_CONVENTIONAL_PCI_DEVICE },
|
|
|
|
{ },
|
|
|
|
},
|
2015-05-13 02:43:23 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
static void piix3_class_init(ObjectClass *klass, void *data)
|
|
|
|
{
|
|
|
|
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
|
|
|
|
|
|
|
|
k->config_write = piix3_write_config;
|
|
|
|
}
|
|
|
|
|
2012-08-20 19:07:56 +02:00
|
|
|
static const TypeInfo piix3_info = {
|
2018-10-11 14:38:54 +02:00
|
|
|
.name = TYPE_PIIX3_DEVICE,
|
2015-05-13 02:43:23 +02:00
|
|
|
.parent = TYPE_PIIX3_PCI_DEVICE,
|
2011-12-08 04:34:16 +01:00
|
|
|
.class_init = piix3_class_init,
|
2011-12-07 02:32:44 +01:00
|
|
|
};
|
|
|
|
|
2011-12-04 19:22:06 +01:00
|
|
|
static void piix3_xen_class_init(ObjectClass *klass, void *data)
|
|
|
|
{
|
|
|
|
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
|
|
|
|
|
|
|
|
k->config_write = piix3_write_config_xen;
|
2011-12-07 02:32:44 +01:00
|
|
|
};
|
|
|
|
|
2012-08-20 19:07:56 +02:00
|
|
|
static const TypeInfo piix3_xen_info = {
|
2018-10-11 14:38:54 +02:00
|
|
|
.name = TYPE_PIIX3_XEN_DEVICE,
|
2015-05-13 02:43:23 +02:00
|
|
|
.parent = TYPE_PIIX3_PCI_DEVICE,
|
2011-12-08 04:34:16 +01:00
|
|
|
.class_init = piix3_xen_class_init,
|
2011-12-04 19:22:06 +01:00
|
|
|
};
|
|
|
|
|
|
|
|
static void i440fx_class_init(ObjectClass *klass, void *data)
|
|
|
|
{
|
2011-12-08 04:34:16 +01:00
|
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
2011-12-04 19:22:06 +01:00
|
|
|
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
|
|
|
|
|
2015-01-19 15:52:30 +01:00
|
|
|
k->realize = i440fx_realize;
|
2011-12-04 19:22:06 +01:00
|
|
|
k->config_write = i440fx_write_config;
|
|
|
|
k->vendor_id = PCI_VENDOR_ID_INTEL;
|
|
|
|
k->device_id = PCI_DEVICE_ID_INTEL_82441;
|
|
|
|
k->revision = 0x02;
|
|
|
|
k->class_id = PCI_CLASS_BRIDGE_HOST;
|
2011-12-08 04:34:16 +01:00
|
|
|
dc->desc = "Host bridge";
|
|
|
|
dc->vmsd = &vmstate_i440fx;
|
pci-host: Consistently set cannot_instantiate_with_device_add_yet
Many PCI host bridges consist of a sysbus device and a PCI device.
You need both for the thing to work. Arguably, these bridges should
be modelled as a single, composite devices instead of pairs of
seemingly independent devices you can only use together, but we're not
there, yet.
Since the sysbus part can't be instantiated with device_add, yet,
permitting it with the PCI part is useless. We shouldn't offer
useless options to the user, so let's set
cannot_instantiate_with_device_add_yet for them.
It's already set for Bonito, Grackle, i440FX and Raven. Document why.
Set it for the others: dec-21154, e500-host-bridge, gt64120_pci, mch,
pbm-pci, ppc4xx-host-bridge, sh_pci_host, u3-agp, uni-north-agp,
uni-north-internal-pci, uni-north-pci, and versatile_pci_host.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-11-28 17:26:58 +01:00
|
|
|
/*
|
|
|
|
* PCI-facing part of the host bridge, not usable without the
|
|
|
|
* host-facing part, which can't be device_add'ed, yet.
|
|
|
|
*/
|
2017-05-03 22:35:44 +02:00
|
|
|
dc->user_creatable = false;
|
2014-02-05 16:36:48 +01:00
|
|
|
dc->hotpluggable = false;
|
2011-12-04 19:22:06 +01:00
|
|
|
}
|
|
|
|
|
2012-08-20 19:07:56 +02:00
|
|
|
static const TypeInfo i440fx_info = {
|
2013-02-23 01:40:37 +01:00
|
|
|
.name = TYPE_I440FX_PCI_DEVICE,
|
2011-12-08 04:34:16 +01:00
|
|
|
.parent = TYPE_PCI_DEVICE,
|
|
|
|
.instance_size = sizeof(PCII440FXState),
|
|
|
|
.class_init = i440fx_class_init,
|
2017-09-27 21:56:34 +02:00
|
|
|
.interfaces = (InterfaceInfo[]) {
|
|
|
|
{ INTERFACE_CONVENTIONAL_PCI_DEVICE },
|
|
|
|
{ },
|
|
|
|
},
|
2009-07-22 15:17:01 +02:00
|
|
|
};
|
|
|
|
|
2015-07-15 07:37:43 +02:00
|
|
|
/* IGD Passthrough Host Bridge. */
|
|
|
|
typedef struct {
|
|
|
|
uint8_t offset;
|
|
|
|
uint8_t len;
|
|
|
|
} IGDHostInfo;
|
|
|
|
|
|
|
|
/* Here we just expose minimal host bridge offset subset. */
|
|
|
|
static const IGDHostInfo igd_host_bridge_infos[] = {
|
|
|
|
{0x08, 2}, /* revision id */
|
|
|
|
{0x2c, 2}, /* sybsystem vendor id */
|
|
|
|
{0x2e, 2}, /* sybsystem id */
|
|
|
|
{0x50, 2}, /* SNB: processor graphics control register */
|
|
|
|
{0x52, 2}, /* processor graphics control register */
|
|
|
|
{0xa4, 4}, /* SNB: graphics base of stolen memory */
|
|
|
|
{0xa8, 4}, /* SNB: base of GTT stolen memory */
|
|
|
|
};
|
|
|
|
|
2017-12-18 16:12:42 +01:00
|
|
|
static void host_pci_config_read(int pos, int len, uint32_t *val, Error **errp)
|
2015-07-15 07:37:43 +02:00
|
|
|
{
|
2017-12-18 16:12:42 +01:00
|
|
|
int rc, config_fd;
|
2015-07-15 07:37:43 +02:00
|
|
|
/* Access real host bridge. */
|
2017-12-18 16:12:42 +01:00
|
|
|
char *path = g_strdup_printf("/sys/bus/pci/devices/%04x:%02x:%02x.%d/%s",
|
|
|
|
0, 0, 0, 0, "config");
|
2015-07-15 07:37:43 +02:00
|
|
|
|
|
|
|
config_fd = open(path, O_RDWR);
|
|
|
|
if (config_fd < 0) {
|
2017-12-18 16:12:42 +01:00
|
|
|
error_setg_errno(errp, errno, "Failed to open: %s", path);
|
|
|
|
goto out;
|
2015-07-15 07:37:43 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
if (lseek(config_fd, pos, SEEK_SET) != pos) {
|
2017-12-18 16:12:42 +01:00
|
|
|
error_setg_errno(errp, errno, "Failed to seek: %s", path);
|
|
|
|
goto out_close_fd;
|
2015-07-15 07:37:43 +02:00
|
|
|
}
|
2016-01-02 09:02:20 +01:00
|
|
|
|
2015-07-15 07:37:43 +02:00
|
|
|
do {
|
2016-01-02 09:02:20 +01:00
|
|
|
rc = read(config_fd, (uint8_t *)val, len);
|
2015-07-15 07:37:43 +02:00
|
|
|
} while (rc < 0 && (errno == EINTR || errno == EAGAIN));
|
|
|
|
if (rc != len) {
|
2017-12-18 16:12:42 +01:00
|
|
|
error_setg_errno(errp, errno, "Failed to read: %s", path);
|
2015-07-15 07:37:43 +02:00
|
|
|
}
|
2016-01-02 09:02:20 +01:00
|
|
|
|
2017-12-18 16:12:42 +01:00
|
|
|
out_close_fd:
|
2015-09-14 12:40:10 +02:00
|
|
|
close(config_fd);
|
2017-12-18 16:12:42 +01:00
|
|
|
out:
|
|
|
|
g_free(path);
|
2015-07-15 07:37:43 +02:00
|
|
|
}
|
|
|
|
|
2017-12-18 16:12:42 +01:00
|
|
|
static void igd_pt_i440fx_realize(PCIDevice *pci_dev, Error **errp)
|
2015-07-15 07:37:43 +02:00
|
|
|
{
|
|
|
|
uint32_t val = 0;
|
2017-12-18 16:12:42 +01:00
|
|
|
int i, num;
|
2015-07-15 07:37:43 +02:00
|
|
|
int pos, len;
|
2017-12-18 16:12:42 +01:00
|
|
|
Error *local_err = NULL;
|
2015-07-15 07:37:43 +02:00
|
|
|
|
|
|
|
num = ARRAY_SIZE(igd_host_bridge_infos);
|
|
|
|
for (i = 0; i < num; i++) {
|
|
|
|
pos = igd_host_bridge_infos[i].offset;
|
|
|
|
len = igd_host_bridge_infos[i].len;
|
2017-12-18 16:12:42 +01:00
|
|
|
host_pci_config_read(pos, len, &val, &local_err);
|
|
|
|
if (local_err) {
|
|
|
|
error_propagate(errp, local_err);
|
|
|
|
return;
|
2015-07-15 07:37:43 +02:00
|
|
|
}
|
|
|
|
pci_default_write_config(pci_dev, pos, val, len);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void igd_passthrough_i440fx_class_init(ObjectClass *klass, void *data)
|
|
|
|
{
|
|
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
|
|
|
|
|
2017-12-18 16:12:42 +01:00
|
|
|
k->realize = igd_pt_i440fx_realize;
|
2015-07-15 07:37:43 +02:00
|
|
|
dc->desc = "IGD Passthrough Host bridge";
|
|
|
|
}
|
|
|
|
|
|
|
|
static const TypeInfo igd_passthrough_i440fx_info = {
|
|
|
|
.name = TYPE_IGD_PASSTHROUGH_I440FX_PCI_DEVICE,
|
|
|
|
.parent = TYPE_I440FX_PCI_DEVICE,
|
|
|
|
.instance_size = sizeof(PCII440FXState),
|
|
|
|
.class_init = igd_passthrough_i440fx_class_init,
|
|
|
|
};
|
|
|
|
|
2013-06-06 10:48:49 +02:00
|
|
|
static const char *i440fx_pcihost_root_bus_path(PCIHostState *host_bridge,
|
|
|
|
PCIBus *rootbus)
|
|
|
|
{
|
2013-11-06 00:46:27 +01:00
|
|
|
I440FXState *s = I440FX_PCI_HOST_BRIDGE(host_bridge);
|
|
|
|
|
2013-06-06 10:48:49 +02:00
|
|
|
/* For backwards compat with old device paths */
|
2013-11-06 00:46:27 +01:00
|
|
|
if (s->short_root_bus) {
|
|
|
|
return "0000";
|
|
|
|
}
|
|
|
|
return "0000:00";
|
2013-06-06 10:48:49 +02:00
|
|
|
}
|
|
|
|
|
2013-07-29 16:47:57 +02:00
|
|
|
static Property i440fx_props[] = {
|
|
|
|
DEFINE_PROP_SIZE(PCI_HOST_PROP_PCI_HOLE64_SIZE, I440FXState,
|
2017-11-11 16:25:00 +01:00
|
|
|
pci_hole64_size, I440FX_PCI_HOST_HOLE64_SIZE_DEFAULT),
|
2013-11-06 00:46:27 +01:00
|
|
|
DEFINE_PROP_UINT32("short_root_bus", I440FXState, short_root_bus, 0),
|
2017-11-11 16:25:00 +01:00
|
|
|
DEFINE_PROP_BOOL("x-pci-hole64-fix", I440FXState, pci_hole64_fix, true),
|
2013-07-29 16:47:57 +02:00
|
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
|
|
};
|
|
|
|
|
2012-01-24 20:12:29 +01:00
|
|
|
static void i440fx_pcihost_class_init(ObjectClass *klass, void *data)
|
|
|
|
{
|
2011-12-08 04:34:16 +01:00
|
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
2013-06-06 10:48:49 +02:00
|
|
|
PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(klass);
|
2012-01-24 20:12:29 +01:00
|
|
|
|
2013-06-06 10:48:49 +02:00
|
|
|
hc->root_bus_path = i440fx_pcihost_root_bus_path;
|
2013-07-01 12:18:20 +02:00
|
|
|
dc->realize = i440fx_pcihost_realize;
|
2011-12-08 04:34:16 +01:00
|
|
|
dc->fw_name = "pci";
|
2013-07-29 16:47:57 +02:00
|
|
|
dc->props = i440fx_props;
|
2016-06-27 17:38:33 +02:00
|
|
|
/* Reason: needs to be wired up by pc_init1 */
|
2017-05-03 22:35:44 +02:00
|
|
|
dc->user_creatable = false;
|
2012-01-24 20:12:29 +01:00
|
|
|
}
|
|
|
|
|
2012-08-20 19:07:56 +02:00
|
|
|
static const TypeInfo i440fx_pcihost_info = {
|
2013-07-29 16:47:52 +02:00
|
|
|
.name = TYPE_I440FX_PCI_HOST_BRIDGE,
|
2012-08-20 19:08:08 +02:00
|
|
|
.parent = TYPE_PCI_HOST_BRIDGE,
|
2011-12-08 04:34:16 +01:00
|
|
|
.instance_size = sizeof(I440FXState),
|
2013-07-01 12:18:20 +02:00
|
|
|
.instance_init = i440fx_pcihost_initfn,
|
2011-12-08 04:34:16 +01:00
|
|
|
.class_init = i440fx_pcihost_class_init,
|
2009-07-22 15:17:01 +02:00
|
|
|
};
|
|
|
|
|
2012-02-09 15:20:55 +01:00
|
|
|
static void i440fx_register_types(void)
|
2009-07-22 15:17:01 +02:00
|
|
|
{
|
2011-12-08 04:34:16 +01:00
|
|
|
type_register_static(&i440fx_info);
|
2015-07-15 07:37:43 +02:00
|
|
|
type_register_static(&igd_passthrough_i440fx_info);
|
2015-05-13 02:43:23 +02:00
|
|
|
type_register_static(&piix3_pci_type_info);
|
2011-12-08 04:34:16 +01:00
|
|
|
type_register_static(&piix3_info);
|
|
|
|
type_register_static(&piix3_xen_info);
|
|
|
|
type_register_static(&i440fx_pcihost_info);
|
2009-07-22 15:17:01 +02:00
|
|
|
}
|
2012-02-09 15:20:55 +01:00
|
|
|
|
|
|
|
type_init(i440fx_register_types)
|