qemu-e2k/hw/timer/mc146818rtc.c

1064 lines
32 KiB
C
Raw Normal View History

/*
* QEMU MC146818 RTC emulation
*
* Copyright (c) 2003-2004 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qemu/cutils.h"
#include "qemu/module.h"
#include "qemu/bcd.h"
#include "hw/irq.h"
#include "hw/qdev-properties.h"
#include "qemu/timer.h"
#include "sysemu/sysemu.h"
#include "sysemu/replay.h"
#include "sysemu/reset.h"
#include "sysemu/runstate.h"
#include "hw/timer/mc146818rtc.h"
#include "migration/vmstate.h"
#include "qapi/error.h"
#include "qapi/qapi-commands-misc-target.h"
#include "qapi/qapi-events-misc-target.h"
#include "qapi/visitor.h"
#include "exec/address-spaces.h"
#ifdef TARGET_I386
#include "hw/i386/apic.h"
#endif
//#define DEBUG_CMOS
//#define DEBUG_COALESCED
#ifdef DEBUG_CMOS
# define CMOS_DPRINTF(format, ...) printf(format, ## __VA_ARGS__)
#else
# define CMOS_DPRINTF(format, ...) do { } while (0)
#endif
#ifdef DEBUG_COALESCED
# define DPRINTF_C(format, ...) printf(format, ## __VA_ARGS__)
#else
# define DPRINTF_C(format, ...) do { } while (0)
#endif
#define SEC_PER_MIN 60
#define MIN_PER_HOUR 60
#define SEC_PER_HOUR 3600
#define HOUR_PER_DAY 24
#define SEC_PER_DAY 86400
#define RTC_REINJECT_ON_ACK_COUNT 20
#define RTC_CLOCK_RATE 32768
#define UIP_HOLD_LENGTH (8 * NANOSECONDS_PER_SECOND / 32768)
#define MC146818_RTC(obj) OBJECT_CHECK(RTCState, (obj), TYPE_MC146818_RTC)
typedef struct RTCState {
ISADevice parent_obj;
MemoryRegion io;
MemoryRegion coalesced_io;
uint8_t cmos_data[128];
uint8_t cmos_index;
int32_t base_year;
uint64_t base_rtc;
uint64_t last_update;
int64_t offset;
qemu_irq irq;
int it_shift;
/* periodic timer */
QEMUTimer *periodic_timer;
int64_t next_periodic_time;
/* update-ended timer */
QEMUTimer *update_timer;
uint64_t next_alarm_time;
uint16_t irq_reinject_on_ack_count;
uint32_t irq_coalesced;
uint32_t period;
QEMUTimer *coalesced_timer;
LostTickPolicy lost_tick_policy;
Notifier suspend_notifier;
QLIST_ENTRY(RTCState) link;
} RTCState;
static void rtc_set_time(RTCState *s);
static void rtc_update_time(RTCState *s);
static void rtc_set_cmos(RTCState *s, const struct tm *tm);
static inline int rtc_from_bcd(RTCState *s, int a);
static uint64_t get_next_alarm(RTCState *s);
static inline bool rtc_running(RTCState *s)
{
return (!(s->cmos_data[RTC_REG_B] & REG_B_SET) &&
(s->cmos_data[RTC_REG_A] & 0x70) <= 0x20);
}
static uint64_t get_guest_rtc_ns(RTCState *s)
{
uint64_t guest_clock = qemu_clock_get_ns(rtc_clock);
return s->base_rtc * NANOSECONDS_PER_SECOND +
guest_clock - s->last_update + s->offset;
}
static void rtc_coalesced_timer_update(RTCState *s)
{
if (s->irq_coalesced == 0) {
timer_del(s->coalesced_timer);
} else {
/* divide each RTC interval to 2 - 8 smaller intervals */
int c = MIN(s->irq_coalesced, 7) + 1;
int64_t next_clock = qemu_clock_get_ns(rtc_clock) +
periodic_clock_to_ns(s->period / c);
timer_mod(s->coalesced_timer, next_clock);
}
}
static QLIST_HEAD(, RTCState) rtc_devices =
QLIST_HEAD_INITIALIZER(rtc_devices);
#ifdef TARGET_I386
void qmp_rtc_reset_reinjection(Error **errp)
{
RTCState *s;
QLIST_FOREACH(s, &rtc_devices, link) {
s->irq_coalesced = 0;
}
}
static bool rtc_policy_slew_deliver_irq(RTCState *s)
{
apic_reset_irq_delivered();
qemu_irq_raise(s->irq);
return apic_get_irq_delivered();
}
static void rtc_coalesced_timer(void *opaque)
{
RTCState *s = opaque;
if (s->irq_coalesced != 0) {
s->cmos_data[RTC_REG_C] |= 0xc0;
DPRINTF_C("cmos: injecting from timer\n");
if (rtc_policy_slew_deliver_irq(s)) {
s->irq_coalesced--;
DPRINTF_C("cmos: coalesced irqs decreased to %d\n",
s->irq_coalesced);
}
}
rtc_coalesced_timer_update(s);
}
#else
static bool rtc_policy_slew_deliver_irq(RTCState *s)
{
assert(0);
return false;
}
#endif
static uint32_t rtc_periodic_clock_ticks(RTCState *s)
{
int period_code;
if (!(s->cmos_data[RTC_REG_B] & REG_B_PIE)) {
return 0;
}
period_code = s->cmos_data[RTC_REG_A] & 0x0f;
return periodic_period_to_clock(period_code);
}
/*
* handle periodic timer. @old_period indicates the periodic timer update
* is just due to period adjustment.
*/
static void
periodic_timer_update(RTCState *s, int64_t current_time, uint32_t old_period)
{
uint32_t period;
int64_t cur_clock, next_irq_clock, lost_clock = 0;
period = rtc_periodic_clock_ticks(s);
if (period) {
/* compute 32 khz clock */
cur_clock =
muldiv64(current_time, RTC_CLOCK_RATE, NANOSECONDS_PER_SECOND);
/*
* if the periodic timer's update is due to period re-configuration,
* we should count the clock since last interrupt.
*/
if (old_period) {
int64_t last_periodic_clock, next_periodic_clock;
next_periodic_clock = muldiv64(s->next_periodic_time,
RTC_CLOCK_RATE, NANOSECONDS_PER_SECOND);
last_periodic_clock = next_periodic_clock - old_period;
lost_clock = cur_clock - last_periodic_clock;
assert(lost_clock >= 0);
}
/*
* s->irq_coalesced can change for two reasons:
*
* a) if one or more periodic timer interrupts have been lost,
* lost_clock will be more that a period.
*
* b) when the period may be reconfigured, we expect the OS to
* treat delayed tick as the new period. So, when switching
* from a shorter to a longer period, scale down the missing,
* because the OS will treat past delayed ticks as longer
* (leftovers are put back into lost_clock). When switching
* to a shorter period, scale up the missing ticks since the
* OS handler will treat past delayed ticks as shorter.
*/
if (s->lost_tick_policy == LOST_TICK_POLICY_SLEW) {
uint32_t old_irq_coalesced = s->irq_coalesced;
s->period = period;
lost_clock += old_irq_coalesced * old_period;
s->irq_coalesced = lost_clock / s->period;
lost_clock %= s->period;
if (old_irq_coalesced != s->irq_coalesced ||
old_period != s->period) {
DPRINTF_C("cmos: coalesced irqs scaled from %d to %d, "
"period scaled from %d to %d\n", old_irq_coalesced,
s->irq_coalesced, old_period, s->period);
rtc_coalesced_timer_update(s);
}
} else {
/*
* no way to compensate the interrupt if LOST_TICK_POLICY_SLEW
* is not used, we should make the time progress anyway.
*/
lost_clock = MIN(lost_clock, period);
}
assert(lost_clock >= 0 && lost_clock <= period);
next_irq_clock = cur_clock + period - lost_clock;
s->next_periodic_time = periodic_clock_to_ns(next_irq_clock) + 1;
timer_mod(s->periodic_timer, s->next_periodic_time);
} else {
s->irq_coalesced = 0;
timer_del(s->periodic_timer);
}
}
static void rtc_periodic_timer(void *opaque)
{
RTCState *s = opaque;
periodic_timer_update(s, s->next_periodic_time, 0);
s->cmos_data[RTC_REG_C] |= REG_C_PF;
if (s->cmos_data[RTC_REG_B] & REG_B_PIE) {
s->cmos_data[RTC_REG_C] |= REG_C_IRQF;
if (s->lost_tick_policy == LOST_TICK_POLICY_SLEW) {
if (s->irq_reinject_on_ack_count >= RTC_REINJECT_ON_ACK_COUNT)
s->irq_reinject_on_ack_count = 0;
if (!rtc_policy_slew_deliver_irq(s)) {
s->irq_coalesced++;
rtc_coalesced_timer_update(s);
DPRINTF_C("cmos: coalesced irqs increased to %d\n",
s->irq_coalesced);
}
} else
qemu_irq_raise(s->irq);
}
}
/* handle update-ended timer */
static void check_update_timer(RTCState *s)
{
uint64_t next_update_time;
uint64_t guest_nsec;
int next_alarm_sec;
/* From the data sheet: "Holding the dividers in reset prevents
* interrupts from operating, while setting the SET bit allows"
* them to occur.
*/
if ((s->cmos_data[RTC_REG_A] & 0x60) == 0x60) {
assert((s->cmos_data[RTC_REG_A] & REG_A_UIP) == 0);
timer_del(s->update_timer);
return;
}
guest_nsec = get_guest_rtc_ns(s) % NANOSECONDS_PER_SECOND;
next_update_time = qemu_clock_get_ns(rtc_clock)
+ NANOSECONDS_PER_SECOND - guest_nsec;
/* Compute time of next alarm. One second is already accounted
* for in next_update_time.
*/
next_alarm_sec = get_next_alarm(s);
s->next_alarm_time = next_update_time +
(next_alarm_sec - 1) * NANOSECONDS_PER_SECOND;
/* If update_in_progress latched the UIP bit, we must keep the timer
* programmed to the next second, so that UIP is cleared. Otherwise,
* if UF is already set, we might be able to optimize.
*/
if (!(s->cmos_data[RTC_REG_A] & REG_A_UIP) &&
(s->cmos_data[RTC_REG_C] & REG_C_UF)) {
/* If AF cannot change (i.e. either it is set already, or
* SET=1 and then the time is not updated), nothing to do.
*/
if ((s->cmos_data[RTC_REG_B] & REG_B_SET) ||
(s->cmos_data[RTC_REG_C] & REG_C_AF)) {
timer_del(s->update_timer);
return;
}
/* UF is set, but AF is clear. Program the timer to target
* the alarm time. */
next_update_time = s->next_alarm_time;
}
if (next_update_time != timer_expire_time_ns(s->update_timer)) {
timer_mod(s->update_timer, next_update_time);
}
}
static inline uint8_t convert_hour(RTCState *s, uint8_t hour)
{
if (!(s->cmos_data[RTC_REG_B] & REG_B_24H)) {
hour %= 12;
if (s->cmos_data[RTC_HOURS] & 0x80) {
hour += 12;
}
}
return hour;
}
static uint64_t get_next_alarm(RTCState *s)
{
int32_t alarm_sec, alarm_min, alarm_hour, cur_hour, cur_min, cur_sec;
int32_t hour, min, sec;
rtc_update_time(s);
alarm_sec = rtc_from_bcd(s, s->cmos_data[RTC_SECONDS_ALARM]);
alarm_min = rtc_from_bcd(s, s->cmos_data[RTC_MINUTES_ALARM]);
alarm_hour = rtc_from_bcd(s, s->cmos_data[RTC_HOURS_ALARM]);
alarm_hour = alarm_hour == -1 ? -1 : convert_hour(s, alarm_hour);
cur_sec = rtc_from_bcd(s, s->cmos_data[RTC_SECONDS]);
cur_min = rtc_from_bcd(s, s->cmos_data[RTC_MINUTES]);
cur_hour = rtc_from_bcd(s, s->cmos_data[RTC_HOURS]);
cur_hour = convert_hour(s, cur_hour);
if (alarm_hour == -1) {
alarm_hour = cur_hour;
if (alarm_min == -1) {
alarm_min = cur_min;
if (alarm_sec == -1) {
alarm_sec = cur_sec + 1;
} else if (cur_sec > alarm_sec) {
alarm_min++;
}
} else if (cur_min == alarm_min) {
if (alarm_sec == -1) {
alarm_sec = cur_sec + 1;
} else {
if (cur_sec > alarm_sec) {
alarm_hour++;
}
}
if (alarm_sec == SEC_PER_MIN) {
/* wrap to next hour, minutes is not in don't care mode */
alarm_sec = 0;
alarm_hour++;
}
} else if (cur_min > alarm_min) {
alarm_hour++;
}
} else if (cur_hour == alarm_hour) {
if (alarm_min == -1) {
alarm_min = cur_min;
if (alarm_sec == -1) {
alarm_sec = cur_sec + 1;
} else if (cur_sec > alarm_sec) {
alarm_min++;
}
if (alarm_sec == SEC_PER_MIN) {
alarm_sec = 0;
alarm_min++;
}
/* wrap to next day, hour is not in don't care mode */
alarm_min %= MIN_PER_HOUR;
} else if (cur_min == alarm_min) {
if (alarm_sec == -1) {
alarm_sec = cur_sec + 1;
}
/* wrap to next day, hours+minutes not in don't care mode */
alarm_sec %= SEC_PER_MIN;
}
}
/* values that are still don't care fire at the next min/sec */
if (alarm_min == -1) {
alarm_min = 0;
}
if (alarm_sec == -1) {
alarm_sec = 0;
}
/* keep values in range */
if (alarm_sec == SEC_PER_MIN) {
alarm_sec = 0;
alarm_min++;
}
if (alarm_min == MIN_PER_HOUR) {
alarm_min = 0;
alarm_hour++;
}
alarm_hour %= HOUR_PER_DAY;
hour = alarm_hour - cur_hour;
min = hour * MIN_PER_HOUR + alarm_min - cur_min;
sec = min * SEC_PER_MIN + alarm_sec - cur_sec;
return sec <= 0 ? sec + SEC_PER_DAY : sec;
}
static void rtc_update_timer(void *opaque)
{
RTCState *s = opaque;
int32_t irqs = REG_C_UF;
int32_t new_irqs;
assert((s->cmos_data[RTC_REG_A] & 0x60) != 0x60);
/* UIP might have been latched, update time and clear it. */
rtc_update_time(s);
s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
if (qemu_clock_get_ns(rtc_clock) >= s->next_alarm_time) {
irqs |= REG_C_AF;
if (s->cmos_data[RTC_REG_B] & REG_B_AIE) {
qmp hmp: Make system_wakeup check wake-up support and run state The qmp/hmp command 'system_wakeup' is simply a direct call to 'qemu_system_wakeup_request' from vl.c. This function verifies if runstate is SUSPENDED and if the wake up reason is valid before proceeding. However, no error or warning is thrown if any of those pre-requirements isn't met. There is no way for the caller to differentiate between a successful wakeup or an error state caused when trying to wake up a guest that wasn't suspended. This means that system_wakeup is silently failing, which can be considered a bug. Adding error handling isn't an API break in this case - applications that didn't check the result will remain broken, the ones that check it will have a chance to deal with it. Adding to that, the commit before previous created a new QMP API called query-current-machine, with a new flag called wakeup-suspend-support, that indicates if the guest has the capability of waking up from suspended state. Although such guest will never reach SUSPENDED state and erroring it out in this scenario would suffice, it is more informative for the user to differentiate between a failure because the guest isn't suspended versus a failure because the guest does not have support for wake up at all. All this considered, this patch changes qmp_system_wakeup to check if the guest is capable of waking up from suspend, and if it is suspended. After this patch, this is the output of system_wakeup in a guest that does not have wake-up from suspend support (ppc64): (qemu) system_wakeup wake-up from suspend is not supported by this guest (qemu) And this is the output of system_wakeup in a x86 guest that has the support but isn't suspended: (qemu) system_wakeup Unable to wake up: guest is not in suspended state (qemu) Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20181205194701.17836-4-danielhb413@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-05 20:47:01 +01:00
qemu_system_wakeup_request(QEMU_WAKEUP_REASON_RTC, NULL);
}
}
new_irqs = irqs & ~s->cmos_data[RTC_REG_C];
s->cmos_data[RTC_REG_C] |= irqs;
if ((new_irqs & s->cmos_data[RTC_REG_B]) != 0) {
s->cmos_data[RTC_REG_C] |= REG_C_IRQF;
qemu_irq_raise(s->irq);
}
check_update_timer(s);
}
static void cmos_ioport_write(void *opaque, hwaddr addr,
uint64_t data, unsigned size)
{
RTCState *s = opaque;
uint32_t old_period;
bool update_periodic_timer;
if ((addr & 1) == 0) {
s->cmos_index = data & 0x7f;
} else {
Fix debug print warning Steps: 1.enable qemu debug print, using simply scprit as below: grep "//#define DEBUG" * -rl | xargs sed -i "s/\/\/#define DEBUG/#define DEBUG/g" 2. make -j 3. get some warning: hw/i2c/pm_smbus.c: In function 'smb_ioport_writeb': hw/i2c/pm_smbus.c:142: warning: format '%04x' expects type 'unsigned int', but argument 2 has type 'hwaddr' hw/i2c/pm_smbus.c:142: warning: format '%02x' expects type 'unsigned int', but argument 3 has type 'uint64_t' hw/i2c/pm_smbus.c: In function 'smb_ioport_readb': hw/i2c/pm_smbus.c:209: warning: format '%04x' expects type 'unsigned int', but argument 2 has type 'hwaddr' hw/intc/i8259.c: In function 'pic_ioport_read': hw/intc/i8259.c:373: warning: format '%02x' expects type 'unsigned int', but argument 2 has type 'hwaddr' hw/input/pckbd.c: In function 'kbd_write_command': hw/input/pckbd.c:232: warning: format '%02x' expects type 'unsigned int', but argument 2 has type 'uint64_t' hw/input/pckbd.c: In function 'kbd_write_data': hw/input/pckbd.c:333: warning: format '%02x' expects type 'unsigned int', but argument 2 has type 'uint64_t' hw/isa/apm.c: In function 'apm_ioport_writeb': hw/isa/apm.c:44: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'hwaddr' hw/isa/apm.c:44: warning: format '%02x' expects type 'unsigned int', but argument 3 has type 'uint64_t' hw/isa/apm.c: In function 'apm_ioport_readb': hw/isa/apm.c:67: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'hwaddr' hw/timer/mc146818rtc.c: In function 'cmos_ioport_write': hw/timer/mc146818rtc.c:394: warning: format '%02x' expects type 'unsigned int', but argument 3 has type 'uint64_t' hw/i386/pc.c: In function 'port92_write': hw/i386/pc.c:479: warning: format '%02x' expects type 'unsigned int', but argument 2 has type 'uint64_t' Fix them. Cc: qemu-trivial@nongnu.org Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-25 04:01:27 +02:00
CMOS_DPRINTF("cmos: write index=0x%02x val=0x%02" PRIx64 "\n",
s->cmos_index, data);
switch(s->cmos_index) {
case RTC_SECONDS_ALARM:
case RTC_MINUTES_ALARM:
case RTC_HOURS_ALARM:
s->cmos_data[s->cmos_index] = data;
check_update_timer(s);
break;
case RTC_IBM_PS2_CENTURY_BYTE:
s->cmos_index = RTC_CENTURY;
/* fall through */
case RTC_CENTURY:
case RTC_SECONDS:
case RTC_MINUTES:
case RTC_HOURS:
case RTC_DAY_OF_WEEK:
case RTC_DAY_OF_MONTH:
case RTC_MONTH:
case RTC_YEAR:
s->cmos_data[s->cmos_index] = data;
/* if in set mode, do not update the time */
if (rtc_running(s)) {
rtc_set_time(s);
check_update_timer(s);
}
break;
case RTC_REG_A:
update_periodic_timer = (s->cmos_data[RTC_REG_A] ^ data) & 0x0f;
old_period = rtc_periodic_clock_ticks(s);
if ((data & 0x60) == 0x60) {
if (rtc_running(s)) {
rtc_update_time(s);
}
/* What happens to UIP when divider reset is enabled is
* unclear from the datasheet. Shouldn't matter much
* though.
*/
s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
} else if (((s->cmos_data[RTC_REG_A] & 0x60) == 0x60) &&
(data & 0x70) <= 0x20) {
/* when the divider reset is removed, the first update cycle
* begins one-half second later*/
if (!(s->cmos_data[RTC_REG_B] & REG_B_SET)) {
s->offset = 500000000;
rtc_set_time(s);
}
s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
}
/* UIP bit is read only */
s->cmos_data[RTC_REG_A] = (data & ~REG_A_UIP) |
(s->cmos_data[RTC_REG_A] & REG_A_UIP);
if (update_periodic_timer) {
periodic_timer_update(s, qemu_clock_get_ns(rtc_clock),
old_period);
}
check_update_timer(s);
break;
case RTC_REG_B:
update_periodic_timer = (s->cmos_data[RTC_REG_B] ^ data)
& REG_B_PIE;
old_period = rtc_periodic_clock_ticks(s);
if (data & REG_B_SET) {
/* update cmos to when the rtc was stopping */
if (rtc_running(s)) {
rtc_update_time(s);
}
/* set mode: reset UIP mode */
s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
data &= ~REG_B_UIE;
} else {
/* if disabling set mode, update the time */
if ((s->cmos_data[RTC_REG_B] & REG_B_SET) &&
(s->cmos_data[RTC_REG_A] & 0x70) <= 0x20) {
s->offset = get_guest_rtc_ns(s) % NANOSECONDS_PER_SECOND;
rtc_set_time(s);
}
}
/* if an interrupt flag is already set when the interrupt
* becomes enabled, raise an interrupt immediately. */
if (data & s->cmos_data[RTC_REG_C] & REG_C_MASK) {
s->cmos_data[RTC_REG_C] |= REG_C_IRQF;
qemu_irq_raise(s->irq);
} else {
s->cmos_data[RTC_REG_C] &= ~REG_C_IRQF;
qemu_irq_lower(s->irq);
}
s->cmos_data[RTC_REG_B] = data;
if (update_periodic_timer) {
periodic_timer_update(s, qemu_clock_get_ns(rtc_clock),
old_period);
}
check_update_timer(s);
break;
case RTC_REG_C:
case RTC_REG_D:
/* cannot write to them */
break;
default:
s->cmos_data[s->cmos_index] = data;
break;
}
}
}
static inline int rtc_to_bcd(RTCState *s, int a)
{
if (s->cmos_data[RTC_REG_B] & REG_B_DM) {
return a;
} else {
return ((a / 10) << 4) | (a % 10);
}
}
static inline int rtc_from_bcd(RTCState *s, int a)
{
if ((a & 0xc0) == 0xc0) {
return -1;
}
if (s->cmos_data[RTC_REG_B] & REG_B_DM) {
return a;
} else {
return ((a >> 4) * 10) + (a & 0x0f);
}
}
static void rtc_get_time(RTCState *s, struct tm *tm)
{
tm->tm_sec = rtc_from_bcd(s, s->cmos_data[RTC_SECONDS]);
tm->tm_min = rtc_from_bcd(s, s->cmos_data[RTC_MINUTES]);
tm->tm_hour = rtc_from_bcd(s, s->cmos_data[RTC_HOURS] & 0x7f);
if (!(s->cmos_data[RTC_REG_B] & REG_B_24H)) {
tm->tm_hour %= 12;
if (s->cmos_data[RTC_HOURS] & 0x80) {
tm->tm_hour += 12;
}
}
tm->tm_wday = rtc_from_bcd(s, s->cmos_data[RTC_DAY_OF_WEEK]) - 1;
tm->tm_mday = rtc_from_bcd(s, s->cmos_data[RTC_DAY_OF_MONTH]);
tm->tm_mon = rtc_from_bcd(s, s->cmos_data[RTC_MONTH]) - 1;
tm->tm_year =
rtc_from_bcd(s, s->cmos_data[RTC_YEAR]) + s->base_year +
rtc_from_bcd(s, s->cmos_data[RTC_CENTURY]) * 100 - 1900;
}
static void rtc_set_time(RTCState *s)
{
struct tm tm;
rtc_get_time(s, &tm);
s->base_rtc = mktimegm(&tm);
s->last_update = qemu_clock_get_ns(rtc_clock);
qapi_event_send_rtc_change(qemu_timedate_diff(&tm));
}
static void rtc_set_cmos(RTCState *s, const struct tm *tm)
{
int year;
s->cmos_data[RTC_SECONDS] = rtc_to_bcd(s, tm->tm_sec);
s->cmos_data[RTC_MINUTES] = rtc_to_bcd(s, tm->tm_min);
if (s->cmos_data[RTC_REG_B] & REG_B_24H) {
/* 24 hour format */
s->cmos_data[RTC_HOURS] = rtc_to_bcd(s, tm->tm_hour);
} else {
/* 12 hour format */
int h = (tm->tm_hour % 12) ? tm->tm_hour % 12 : 12;
s->cmos_data[RTC_HOURS] = rtc_to_bcd(s, h);
if (tm->tm_hour >= 12)
s->cmos_data[RTC_HOURS] |= 0x80;
}
s->cmos_data[RTC_DAY_OF_WEEK] = rtc_to_bcd(s, tm->tm_wday + 1);
s->cmos_data[RTC_DAY_OF_MONTH] = rtc_to_bcd(s, tm->tm_mday);
s->cmos_data[RTC_MONTH] = rtc_to_bcd(s, tm->tm_mon + 1);
year = tm->tm_year + 1900 - s->base_year;
s->cmos_data[RTC_YEAR] = rtc_to_bcd(s, year % 100);
s->cmos_data[RTC_CENTURY] = rtc_to_bcd(s, year / 100);
}
static void rtc_update_time(RTCState *s)
{
struct tm ret;
time_t guest_sec;
int64_t guest_nsec;
guest_nsec = get_guest_rtc_ns(s);
guest_sec = guest_nsec / NANOSECONDS_PER_SECOND;
gmtime_r(&guest_sec, &ret);
/* Is SET flag of Register B disabled? */
if ((s->cmos_data[RTC_REG_B] & REG_B_SET) == 0) {
rtc_set_cmos(s, &ret);
}
}
static int update_in_progress(RTCState *s)
{
int64_t guest_nsec;
if (!rtc_running(s)) {
return 0;
}
if (timer_pending(s->update_timer)) {
int64_t next_update_time = timer_expire_time_ns(s->update_timer);
/* Latch UIP until the timer expires. */
if (qemu_clock_get_ns(rtc_clock) >=
(next_update_time - UIP_HOLD_LENGTH)) {
s->cmos_data[RTC_REG_A] |= REG_A_UIP;
return 1;
}
}
guest_nsec = get_guest_rtc_ns(s);
/* UIP bit will be set at last 244us of every second. */
if ((guest_nsec % NANOSECONDS_PER_SECOND) >=
(NANOSECONDS_PER_SECOND - UIP_HOLD_LENGTH)) {
return 1;
}
return 0;
}
static uint64_t cmos_ioport_read(void *opaque, hwaddr addr,
unsigned size)
{
RTCState *s = opaque;
int ret;
if ((addr & 1) == 0) {
return 0xff;
} else {
switch(s->cmos_index) {
case RTC_IBM_PS2_CENTURY_BYTE:
s->cmos_index = RTC_CENTURY;
/* fall through */
case RTC_CENTURY:
case RTC_SECONDS:
case RTC_MINUTES:
case RTC_HOURS:
case RTC_DAY_OF_WEEK:
case RTC_DAY_OF_MONTH:
case RTC_MONTH:
case RTC_YEAR:
/* if not in set mode, calibrate cmos before
* reading*/
if (rtc_running(s)) {
rtc_update_time(s);
}
ret = s->cmos_data[s->cmos_index];
break;
case RTC_REG_A:
ret = s->cmos_data[s->cmos_index];
if (update_in_progress(s)) {
ret |= REG_A_UIP;
}
break;
case RTC_REG_C:
ret = s->cmos_data[s->cmos_index];
qemu_irq_lower(s->irq);
s->cmos_data[RTC_REG_C] = 0x00;
if (ret & (REG_C_UF | REG_C_AF)) {
check_update_timer(s);
}
if(s->irq_coalesced &&
(s->cmos_data[RTC_REG_B] & REG_B_PIE) &&
s->irq_reinject_on_ack_count < RTC_REINJECT_ON_ACK_COUNT) {
s->irq_reinject_on_ack_count++;
s->cmos_data[RTC_REG_C] |= REG_C_IRQF | REG_C_PF;
DPRINTF_C("cmos: injecting on ack\n");
if (rtc_policy_slew_deliver_irq(s)) {
s->irq_coalesced--;
DPRINTF_C("cmos: coalesced irqs decreased to %d\n",
s->irq_coalesced);
}
}
break;
default:
ret = s->cmos_data[s->cmos_index];
break;
}
CMOS_DPRINTF("cmos: read index=0x%02x val=0x%02x\n",
s->cmos_index, ret);
return ret;
}
}
void rtc_set_memory(ISADevice *dev, int addr, int val)
{
RTCState *s = MC146818_RTC(dev);
if (addr >= 0 && addr <= 127)
s->cmos_data[addr] = val;
}
int rtc_get_memory(ISADevice *dev, int addr)
{
RTCState *s = MC146818_RTC(dev);
assert(addr >= 0 && addr <= 127);
return s->cmos_data[addr];
}
static void rtc_set_date_from_host(ISADevice *dev)
{
RTCState *s = MC146818_RTC(dev);
struct tm tm;
qemu_get_timedate(&tm, 0);
s->base_rtc = mktimegm(&tm);
s->last_update = qemu_clock_get_ns(rtc_clock);
s->offset = 0;
/* set the CMOS date */
rtc_set_cmos(s, &tm);
}
static int rtc_pre_save(void *opaque)
{
RTCState *s = opaque;
rtc_update_time(s);
return 0;
}
static int rtc_post_load(void *opaque, int version_id)
{
RTCState *s = opaque;
if (version_id <= 2 || rtc_clock == QEMU_CLOCK_REALTIME) {
rtc_set_time(s);
s->offset = 0;
check_update_timer(s);
}
/* The periodic timer is deterministic in record/replay mode,
* so there is no need to update it after loading the vmstate.
* Reading RTC here would misalign record and replay.
*/
if (replay_mode == REPLAY_MODE_NONE) {
uint64_t now = qemu_clock_get_ns(rtc_clock);
if (now < s->next_periodic_time ||
now > (s->next_periodic_time + get_max_clock_jump())) {
periodic_timer_update(s, qemu_clock_get_ns(rtc_clock), 0);
}
}
if (version_id >= 2) {
if (s->lost_tick_policy == LOST_TICK_POLICY_SLEW) {
rtc_coalesced_timer_update(s);
}
}
return 0;
}
static bool rtc_irq_reinject_on_ack_count_needed(void *opaque)
{
RTCState *s = (RTCState *)opaque;
return s->irq_reinject_on_ack_count != 0;
}
static const VMStateDescription vmstate_rtc_irq_reinject_on_ack_count = {
.name = "mc146818rtc/irq_reinject_on_ack_count",
.version_id = 1,
.minimum_version_id = 1,
.needed = rtc_irq_reinject_on_ack_count_needed,
.fields = (VMStateField[]) {
VMSTATE_UINT16(irq_reinject_on_ack_count, RTCState),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_rtc = {
.name = "mc146818rtc",
.version_id = 3,
.minimum_version_id = 1,
.pre_save = rtc_pre_save,
.post_load = rtc_post_load,
.fields = (VMStateField[]) {
VMSTATE_BUFFER(cmos_data, RTCState),
VMSTATE_UINT8(cmos_index, RTCState),
VMSTATE_UNUSED(7*4),
VMSTATE_TIMER_PTR(periodic_timer, RTCState),
VMSTATE_INT64(next_periodic_time, RTCState),
VMSTATE_UNUSED(3*8),
VMSTATE_UINT32_V(irq_coalesced, RTCState, 2),
VMSTATE_UINT32_V(period, RTCState, 2),
VMSTATE_UINT64_V(base_rtc, RTCState, 3),
VMSTATE_UINT64_V(last_update, RTCState, 3),
VMSTATE_INT64_V(offset, RTCState, 3),
VMSTATE_TIMER_PTR_V(update_timer, RTCState, 3),
VMSTATE_UINT64_V(next_alarm_time, RTCState, 3),
VMSTATE_END_OF_LIST()
},
.subsections = (const VMStateDescription*[]) {
&vmstate_rtc_irq_reinject_on_ack_count,
NULL
}
};
/* set CMOS shutdown status register (index 0xF) as S3_resume(0xFE)
BIOS will read it and start S3 resume at POST Entry */
static void rtc_notify_suspend(Notifier *notifier, void *data)
{
RTCState *s = container_of(notifier, RTCState, suspend_notifier);
rtc_set_memory(ISA_DEVICE(s), 0xF, 0xFE);
}
static void rtc_reset(void *opaque)
{
RTCState *s = opaque;
s->cmos_data[RTC_REG_B] &= ~(REG_B_PIE | REG_B_AIE | REG_B_SQWE);
s->cmos_data[RTC_REG_C] &= ~(REG_C_UF | REG_C_IRQF | REG_C_PF | REG_C_AF);
check_update_timer(s);
qemu_irq_lower(s->irq);
if (s->lost_tick_policy == LOST_TICK_POLICY_SLEW) {
s->irq_coalesced = 0;
s->irq_reinject_on_ack_count = 0;
}
}
static const MemoryRegionOps cmos_ops = {
.read = cmos_ioport_read,
.write = cmos_ioport_write,
.impl = {
.min_access_size = 1,
.max_access_size = 1,
},
.endianness = DEVICE_LITTLE_ENDIAN,
};
static void rtc_get_date(Object *obj, struct tm *current_tm, Error **errp)
{
RTCState *s = MC146818_RTC(obj);
rtc_update_time(s);
rtc_get_time(s, current_tm);
}
static void rtc_realizefn(DeviceState *dev, Error **errp)
{
ISADevice *isadev = ISA_DEVICE(dev);
RTCState *s = MC146818_RTC(dev);
int base = 0x70;
s->cmos_data[RTC_REG_A] = 0x26;
s->cmos_data[RTC_REG_B] = 0x02;
s->cmos_data[RTC_REG_C] = 0x00;
s->cmos_data[RTC_REG_D] = 0x80;
/* This is for historical reasons. The default base year qdev property
* was set to 2000 for most machine types before the century byte was
* implemented.
*
* This if statement means that the century byte will be always 0
* (at least until 2079...) for base_year = 1980, but will be set
* correctly for base_year = 2000.
*/
if (s->base_year == 2000) {
s->base_year = 0;
}
rtc_set_date_from_host(isadev);
switch (s->lost_tick_policy) {
#ifdef TARGET_I386
case LOST_TICK_POLICY_SLEW:
s->coalesced_timer =
timer_new_ns(rtc_clock, rtc_coalesced_timer, s);
break;
#endif
case LOST_TICK_POLICY_DISCARD:
break;
default:
error_setg(errp, "Invalid lost tick policy.");
return;
}
s->periodic_timer = timer_new_ns(rtc_clock, rtc_periodic_timer, s);
s->update_timer = timer_new_ns(rtc_clock, rtc_update_timer, s);
check_update_timer(s);
s->suspend_notifier.notify = rtc_notify_suspend;
qemu_register_suspend_notifier(&s->suspend_notifier);
memory_region_init_io(&s->io, OBJECT(s), &cmos_ops, s, "rtc", 2);
isa_register_ioport(isadev, &s->io, base);
/* register rtc 0x70 port for coalesced_pio */
memory_region_set_flush_coalesced(&s->io);
memory_region_init_io(&s->coalesced_io, OBJECT(s), &cmos_ops,
s, "rtc-index", 1);
memory_region_add_subregion(&s->io, 0, &s->coalesced_io);
memory_region_add_coalescing(&s->coalesced_io, 0, 1);
qdev_set_legacy_instance_id(dev, base, 3);
qemu_register_reset(rtc_reset, s);
object_property_add_tm(OBJECT(s), "date", rtc_get_date, NULL);
qdev_init_gpio_out(dev, &s->irq, 1);
}
ISADevice *mc146818_rtc_init(ISABus *bus, int base_year, qemu_irq intercept_irq)
{
DeviceState *dev;
ISADevice *isadev;
RTCState *s;
isadev = isa_create(bus, TYPE_MC146818_RTC);
dev = DEVICE(isadev);
s = MC146818_RTC(isadev);
qdev_prop_set_int32(dev, "base_year", base_year);
qdev_init_nofail(dev);
if (intercept_irq) {
qdev_connect_gpio_out(dev, 0, intercept_irq);
} else {
isa_connect_gpio_out(isadev, 0, RTC_ISA_IRQ);
}
QLIST_INSERT_HEAD(&rtc_devices, s, link);
hw/timer/mc146818rtc: Fix introspection problem There is currently a funny problem with the "mc146818rtc" device: 1) Start QEMU like this: qemu-system-ppc64 -M pseries -S 2) At the HMP monitor, enter "info qom-tree". Note that there is an entry for "/rtc (spapr-rtc)". 3) Introspect the mc146818rtc device like this: device_add mc146818rtc,help 4) Run "info qom-tree" again. The "/rtc" entry is gone now! The rtc_finalize() function of the mc146818rtc device has two bugs: First, it tries to remove a "rtc" property, while the rtc_realizefn() added a "rtc-time" property instead. And second, it should have been done in an unrealize function, not in a finalize function, to avoid that this causes problems during introspection. But since adding aliases to the global machine state should not be done from a device's realize function anyway, let's rather fix this issue by moving the creation of the alias to the code that creates the device (and thus is run from the machine init functions instead), i.e. the mc146818_rtc_init() function for most machines. The prep machines are special, since the mc146818rtc device is created here in the realize function of the i82378 device. Since we certainly don't want to add the alias there, we add it to some code that is called from the ibm_40p_init() machine init function instead. Since the alias is now only created during the machine init, we can remove the object_property_del() completely. Fixes: 654a36d857ff949e0d1989904b76f53fded9dc83 Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1534419358-10932-5-git-send-email-thuth@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-16 13:35:54 +02:00
object_property_add_alias(qdev_get_machine(), "rtc-time", OBJECT(s),
"date", NULL);
return isadev;
}
static Property mc146818rtc_properties[] = {
DEFINE_PROP_INT32("base_year", RTCState, base_year, 1980),
DEFINE_PROP_LOSTTICKPOLICY("lost_tick_policy", RTCState,
lost_tick_policy, LOST_TICK_POLICY_DISCARD),
DEFINE_PROP_END_OF_LIST(),
};
static void rtc_resetdev(DeviceState *d)
{
RTCState *s = MC146818_RTC(d);
/* Reason: VM do suspend self will set 0xfe
* Reset any values other than 0xfe(Guest suspend case) */
if (s->cmos_data[0x0f] != 0xfe) {
s->cmos_data[0x0f] = 0x00;
}
}
static void rtc_class_initfn(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = rtc_realizefn;
dc->reset = rtc_resetdev;
dc->vmsd = &vmstate_rtc;
dc->props = mc146818rtc_properties;
/* Reason: needs to be wired up by rtc_init() */
qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable cannot_instantiate_with_device_add_yet was introduced by commit efec3dd631d94160288392721a5f9c39e50fb2bc to replace no_user. It was supposed to be a temporary measure. When it was introduced, we had 54 cannot_instantiate_with_device_add_yet=true lines in the code. Today (3 years later) this number has not shrunk: we now have 57 cannot_instantiate_with_device_add_yet=true lines. I think it is safe to say it is not a temporary measure, and we won't see the flag go away soon. Instead of a long field name that misleads people to believe it is temporary, replace it a shorter and less misleading field: user_creatable. Except for code comments, changes were generated using the following Coccinelle patch: @@ expression DC; @@ ( -DC->cannot_instantiate_with_device_add_yet = false; +DC->user_creatable = true; | -DC->cannot_instantiate_with_device_add_yet = true; +DC->user_creatable = false; ) @@ typedef ObjectClass; expression dc; identifier class, data; @@ static void device_class_init(ObjectClass *class, void *data) { ... dc->hotpluggable = true; +dc->user_creatable = true; ... } @@ @@ struct DeviceClass { ... -bool cannot_instantiate_with_device_add_yet; +bool user_creatable; ... } @@ expression DC; @@ ( -!DC->cannot_instantiate_with_device_add_yet +DC->user_creatable | -DC->cannot_instantiate_with_device_add_yet +!DC->user_creatable ) Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Thomas Huth <thuth@redhat.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-2-ehabkost@redhat.com> [ehabkost: kept "TODO remove once we're there" comment] Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-03 22:35:44 +02:00
dc->user_creatable = false;
}
static const TypeInfo mc146818rtc_info = {
.name = TYPE_MC146818_RTC,
.parent = TYPE_ISA_DEVICE,
.instance_size = sizeof(RTCState),
.class_init = rtc_class_initfn,
};
static void mc146818rtc_register_types(void)
{
type_register_static(&mc146818rtc_info);
}
type_init(mc146818rtc_register_types)