Check that devices on the spapr vio bus aren't given duplicate
addresses. Currently we will not run with duplicate devices, the
fdt code will spot it, but the error reporting is not great. With
this patch we can report the error nicely in terms of the device
names given by the user.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
There is a device tree property "/chosen/linux,stdout-path" which indicates
which device should be used as stdout - ie. "the console".
Currently we don't specify anything, which means both firmware and Linux
choose something arbitrarily. Use the routine we added in the last patch
to pick a default vty and specify it as stdout.
Currently SLOF doesn't use the property, but we are hoping to update it
to do so.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
In vty_lookup() we have a special case for supporting early debug in
the kernel. This accepts reg == 0 as a special case to mean "any vty".
We implement this by searching the vtys on the bus and returning the
first we find. This means that the vty we chose depends on the order
the vtys are specified on the QEMU command line - because that determines
the order of the vtys on the bus.
We'd rather the command line order was irrelevant, so instead return
the vty with the lowest reg value. This is still a guess as to what the
user really means, but it is at least stable WRT command line ordering.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf] fix braces
Although in theory the device tree has no inherent ordering, in practice
the order of nodes in the device tree does effect the order that devices
are detected by software.
Currently the ordering is determined by the order the devices appear on
the QEMU command line. Although that does give the user control over the
ordering, it is fragile, especially when the user does not generate the
command line manually - eg. when using libvirt etc.
So order the device tree based on the reg value, ie. the address of on
the VIO bus of the devices. This gives us a sane and stable ordering.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf] add braces
Add NUMA specific properties to guest's device tree to boot a multi-node
guests. This patch adds the following properties:
ibm,associativity
ibm,architecture-vec-5
ibm,associativity-reference-points
With this, it becomes possible to use -numa option on pseries targets.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
For forgotten historical reasons, PAPR hypercalls for specific virtual IO
devices (oh which there are quite a number) are registered via a callback
in the VIOsPAPRDeviceInfo structure.
This is kind of ugly, so this patch instead registers hypercalls from
device_init() functions for each device type. This works just as well,
and is cleaner.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
When guest reset, we need to halt secondary cpus until guest kick them.
This already works for tcg. The patch add the support for kvm.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf: remove in-kernel irqchip code]
when I tried qemu with -virtio-console pty the guest hangs and attaching
on /dev/pts/<x> does not return anything if the attachment is too late.
This results in pty_chr_write() returning 0, which causes the port to
get throttled. This results in the guest getting frozen as the
guest->host virtio_console writes don't return until the host releases
the vq element back to the guest.
For the virtio-serial use case we don't want to lose data but for the
console case we better drop data instead of "killing" the guest
console. If we get chardev->frontend notification and a better behaving
virtio-console we can revert this fix.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
* aneesh/for-upstream:
scripts/analyse-9p-simpletrace.py: Add symbolic names for 9p operations.
hw/9pfs: iattr_valid flags are kernel internal flags map them to 9p values.
hw/9pfs: Use the correct signed type for different variables
hw/9pfs: replace iovec manipulation with QEMUIOVector
qemu-kvm passes numa/SRAT topology information for smp_cpus to SeaBIOS. However
SeaBIOS always expects to setup max_cpus number of SRAT cpu entries
(MaxCountCPUs variable in build_srat function of Seabios). When qemu-kvm runs
with smp_cpus != max_cpus (e.g. -smp 2,maxcpus=4), Seabios will mistakenly use
memory SRAT info for setting up CPU SRAT entries for the offline CPUs. Wrong
SRAT memory entries are also created. This breaks NUMA in a guest.
Fix by setting up SRAT info for max_cpus in qemu-kvm.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
There's no need to check if ports can accept any incoming data from the
guest each time the guest sends data. Check if the port implements such
functionality during port initialisation.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The earlier code really was a hack: initialising class methods in an
object init function as noted by Anthony.
The motivation for that was to not have the virtio-serial-bus call into
the callback functions if there was no chardev backend registered.
However, that really wasn't a worthwhile optimisation, and definitely
not one that was well-implemented. Get rid of it.
Reported-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For the callback functions invoked by the virtio-serial-bus code, check
if we have chardev backends registered before we call into the chardev
functions.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reported-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kernel internal values can change, add protocol values for these constant and
use them.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
The v9fs_read() and v9fs_write() functions rely on iovec[] manipulation
code should be replaced with QEMUIOVector to avoid duplicating code.
In the future it may be possible to make the code even more concise by
using QEMUIOVector consistently across virtio and 9pfs.
The "v" format specifier for pdu_marshal() and pdu_unmarshal() is
dropped since it does not actually pack/unpack anything. The specifier
was also not implemented to update the offset variable and could only be
used at the end of a format string, another sign that this shouldn't
really be a format specifier. Instead, see the new
v9fs_init_qiov_from_pdu() function.
This change avoids a possible iovec[] buffer overflow when indirect
vrings are used since the number of vectors is now limited by the
underlying VirtQueueElement and cannot be out-of-bounds.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Response format r6 includes a subset of the status bits;
clear the clear-on-read bits which are read by an r6 response.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Fix some bugs in our implementation of the APP_CMD status bit:
* the response to an ACMD should have APP_CMD set, not cleared
* if an illegal ACMD is sent then the next command should be
handled as a normal command
This requires that we split "card is expecting an ACMD" from
the state of the APP_CMD status bit (the latter indicates
both "expecting ACMD" and "that was an ACMD").
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Correct how we handle the type B ("cleared on valid command")
status bits. In particular, the CURRENT_STATE bits in a response
should be the state of the card when it received that command,
not the state when it received the preceding command. (This is
one of the issues noted in LP:597641.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
App commands in an invalid state should set ILLEGAL_COMMAND, not
merely return a zero response.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Handle returning CRC and locked-card errors in the same code path
we use for other responses. This makes no difference in behaviour
but means that these error responses will be printed by the debug
logging code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Add an extra sd_illegal value to the sd_rsp_type_t enum so that
sd_app_command() and sd_normal_command() can tell sd_do_command()
that the command was illegal. This is needed so we can do things
like reset certain status bits only on receipt of a valid command.
For the moment, just use it to pull out the setting of the
ILLEGAL_COMMAND status bit into sd_do_command().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Fix a typo that meant that ADDRESS_ERRORs setting or clearing write
protection would clear every other bit in the status register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
If we fail to validate the CRC for an SD command we should be setting
COM_CRC_ERROR, not clearing it. (This bug actually has no effect currently
because sd_req_crc_validate() always returns success.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Add a clarifying comment about what the CARD_STATUS_[ABC]
macros are defining.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Fix bugs in the code determining whether to accept a command when the
SD card is locked. Most notably, we had the condition completely
reversed, so we would accept all the commands we should refuse and
refuse all the commands we should accept. Correct this by refactoring
the enormous if () clause into a separate function.
We had also missed ACMD42 off the list of commands which are accepted
in locked state: add it.
This is one of the two problems reported in LP:597641.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Now that all sysbus MMIO regions are MemoryRegions, mmio[n].memory
is never NULL, and we can remove some unnecessary conditionals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
NULL is a valid bus/device, so there is no change in behaviour.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Xen currently uses the name of a memory region to determine whether it
is the framebuffer. Replace with an explicit API.
Signed-off-by: Avi Kivity <avi@redhat.com>
Drop the use of cpu_register_phys_memory_client() in favour of the new
MemoryListener API. The new API simplifies the caller, since there is no
need to deal with splitting and merging slots; however this is not exploited
in this patch.
Signed-off-by: Avi Kivity <avi@redhat.com>
The peripheral[-anon] containers are initialized lazily but since they sit on
sysbus, they can not be created after realize. This was causing an abort() to
occur during hotplug if no -device option was used.
This was spotted by qemu-test::device-add.sh
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This function is not longer in use so remove it.
Signed-off-by: Benoît Canet <benoit.canet@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Expose only one container MemoryRegion to sysbus.
(Peter Maydell's idea)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Benoît Canet <benoit.canet@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The isa region is not exposed as a sysbus region because the iobr
register contains its address and use it to remap dynamically
the region. (Peter Maydell's idea)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Benoît Canet <benoit.canet@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Push legacy properties into a "legacy-..." namespace, and make them
available with correct types too.
For now, all properties come in both variants. This need not be the
case for string properties. We will revisit this after -device is
changed to actually use the legacy properties.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds a visitor interface to Property. This way, QOM will be
able to expose Properties that access a fixed field in a struct without
exposing also the everything-is-a-string "feature" of qdev properties.
Whenever the printed representation in both QOM and qdev (which is
typically the case for device backends), parse/print code can be reused
via get_generic/set_generic. Dually, whenever multiple PropertyInfos
have the same representation in both the struct and the visitors the
code can be reused (for example among all of int32/uint32/hex32).
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qdev_property_get and qdev_property_set can generate permission
denied errors themselves. Do not duplicate this functionality in
qdev_get/set_legacy_property, and clean up excessive indentation.
Reviewed-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Reviewed-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently xen_ram_alloc() relies on ram_addr, which is going away.
Give it something else to use as a cookie.
Signed-off-by: Avi Kivity <avi@redhat.com>
event_idx was introduced in 0.15 and must be disabled for all virtio-pci devices
(including virtio-balloon-pci).
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This recently added line in hw/pc_piix.c is causing a SEGV on a Xen
setup because the piix3 property is never created:
qdev_property_add_child(qdev_resolve_path("/i440fx/piix3", NULL),
"rtc", (DeviceState *)rtc_state, NULL);
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Calculate the system clock period on reset; otherwise it remains
set to the default value of zero and attempting to use it provokes
a hang. This is one of the issues noted in LP:696094.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The argument is unused and even wrong when the function is called
by ide_handle_rw_error. Drop it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Commit f462141f18 introduced clean up code
when usb_qdev_init() fails. Unfortunately it calls .handle_destroy()
when .init() was never invoked or failed. This can lead to crashes when
.handle_destroy() tries to clean up things that were never initialized.
This patch is careful to undo only those steps that completed along the
usb_qdev_init() code path. It's not as pretty as the unified error
handling in f462141f18 but it's necessary.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This really shows the power of dynamic object properties compared to qdev
static properties.
This property represents a complex structure who's format is preserved over the
wire. This is enabled by visitors.
It also shows an entirely synthetic property that is not tied to device state.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We first add a 'peripheral' container to the root device that we add user
created devices to. This provides all user created devices with a unique and
isolated namespace.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Links represent an ephemeral relationship between devices. They are meant to
replace the qdev concept of busses by allowing more informal relationships
between devices.
Links are fairly limited in their usefulness without implementing QOM-style
subclassing and interfaces.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There are two types of supported paths--absolute paths and partial paths.
Absolute paths are derived from the root device and can follow child<> or
link<> properties. Since they can follow link<> properties, they can be
arbitrarily long. Absolute paths look like absolute filenames and are prefixed
with a leading slash.
Partial paths are look like relative filenames. They do not begin with a
prefix. The matching rules for partial paths are subtle but designed to make
specifying devices easy. At each level of the composition tree, the partial
path is matched as an absolute path. The first match is not returned. At
least two matches are searched for. A successful result is only returned if
only one match is founded. If more than one match is found, a flag is returned
to indicate that the match was ambiguous.
At the end of the day, partial path support means that if you create a device
called 'ide0', you can just say 'ide0' as the path name and it will Just Work.
If we internally create a device called 'i440fx', you can just say 'i440fx' and
it will Just Work and long as you don't do anything silly.
A management tool should probably always use absolute paths since then they
don't have to deal with the possibility of ambiguity.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The canonical path is the path in the composition tree from the root to the
device. This is effectively the name of the device.
This is an incredibly unefficient implementation that will be optimized in
a future patch.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is based on Jan's suggestion for how to do unique naming. The root device
is the root of composition. All devices are reachable via child<> links from
this device.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Expose all legacy properties through the new QOM property mechanism. The qdev
property types are exposed through the 'legacy<>' namespace. They are always
visited as strings since they do their own string parsing.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qdev properties are settable only during construction and static to classes.
This isn't flexible enough for QOM.
This patch introduces a property interface for qdev that provides dynamic
properties that are tied to objects, instead of classes. These properties are
Visitor based instead of string based too.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Initially attempted with the following semantic patch:
@ rule1 @
expression E;
statement S;
@@
E =
(
dma_bdrv_io
| dma_bdrv_read
| dma_bdrv_write
)
(...);
(
- if (E == NULL) { ... }
|
- if (E)
{ <... S ...> }
)
which however did not match anything.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Initially done with the following semantic patch:
@ rule1 @
expression E;
statement S;
@@
E =
(
bdrv_aio_readv
| bdrv_aio_writev
| bdrv_aio_flush
| bdrv_aio_discard
| bdrv_aio_ioctl
)
(...);
(
- if (E == NULL) { ... }
|
- if (E)
{ <... S ...> }
)
which however missed the occurrence in block/blkverify.c
(as it should have done), and left behind some unused
variables.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
compatiblity->compatibility
transfered->transferred
transfering->transferring
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
algorythm->algorithm
rythm->rhythm
I did not try to fix the coding standard, so checkpatch.pl
reports lots of violations.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Destroying a mutex that another thread might have just unlocked
is racy. It usually works, but you cannot do that in general and
can lead to deadlocks or segfaults. Change ccid to use joinable
threads instead.
(Also, qemu_mutex_init/qemu_cond_init were missing).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Split from Jan's original qemu-thread-posix.c patch. No semantic change,
just introduce the new API that POSIX and Win32 implementations will
conform to.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The Symbian Virtual Platform was an ARM-based development and debugging
board. Since Symbian has been disbanded and the code is no longer being
used it can now be removed.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu_fclose() and QEMUFile->close will return -errno on error, and any
positive value on success.
We need the positive non-zero success values because
migration-exec.c:exec_close() relies on non-zero return values to get
the process exit code.
Changes v1 -> v2:
- Cosmetic spelling change on comment text
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
"!X == 2" is always false (spotted by Coverity), so the checks
for whether rndis is in the correct state would never fire.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch removes some unnecessary casts in the usb-uhci device,
introduced by commit fff23ee9a5
'usb-uhci: Use PCI DMA stub functions'.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch removes some unnecessary casts in the usb-ehci device,
introduced by commit 68d553587c
'usb-ehci: Use PCI DMA stub functions'.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch removes some unnecessary casts in the rtl8139 device,
introduced by commit 3ada003aee
'rtl8139: Use PCI DMA stub functions'.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch removes some unnecessary casts in the lsi53c895a device,
introduced by commit 9ba4524cda
'lsi53c895a: Use PCI DMA stub functions'.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch removes some unnecessary casts in the PCI IDE device,
introduced by commit 552908fef5
'PCI IDE: Use PCI DMA stub functions'.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch removes some unnecessary casts in the e1000 device,
introduced by commit 62ecbd353d 'e1000:
Use PCI DMA stub functions'.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch removes some unnecessary casts in the eepro100 device,
introduced by commit 16ef60c9a8
'eepro100: Use PCI DMA stub functions'.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
hw/mpcore.c is now implementing only ARM11MPCore specific peripherals,
and is #included only from hw/arm11mpcore.c, so just merge it into that
file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the A9MP private peripheral region correctly, rather
than piggybacking on the 11MPCore code; the two CPUs are not the
same in this area.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only code left in mpcore_priv_read and mpcore_priv_write is now
the implementation of the SCU registers. Clean up by renaming functions
and removing some unnecessary conditionals to make this clearer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch to using the GIC memory regions for the CPU interface
rather than hand implementing them as a subcase of mpcore_priv_read()
and mpcore_priv_write().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Expose the ARM GIC CPU interfaces as memory regions, rather than
just providing read and write functions for them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Turn the ARM MPcore private timer/watchdog blocks into separate
qdev devices. This will allow us to share them neatly between
11MPCore and A9MPcore.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Properly implement dual-timer read/write for the sp804 dual timer module.
Based on ARM specs at
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0271d/index.html
Signed-off-by: Hans Jang <hsjang@ok-labs.com>
Signed-off-by: David Mirabito <david.mirabito@nicta.com.au>
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most QEMU files either are pure ASCII or use UTF-8.
Convert some files which still used ISO-8859-1 to UTF-8.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This function name is a bit wrong. Although it doesn't impact function, it is a bit necessary that we should fixup it.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Double semicolons should be single.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Ignore attempts to complete non-existent IRQs; this fixes a buffer
overrun if the guest writes a bad value to the GICC_EOIR register.
(This case is UNPREDICTABLE so ignoring it is a valid choice.)
Note that doing nothing if the guest writes 1023 to this register
is not in fact a change in behaviour: the old code would also
always do nothing in this case but in a non-obvious way.
(The buffer overrun was noted by Coverity, see bug 887883.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
spapr_populate_pci_devices() containd a loop with PCI_NUM_REGIONS (7)
iterations. However this overruns the 'bars' global array, which only has
6 elements. In fact we only want to run this loop for things listed in the
bars array, so this patch corrects the loop bounds to reflect that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Two of the calls to hw_error() in arm_timer.c contain the wrong function name.
As suggested by Andreas Färber, use the C99 standard __func__ macro to
get the correct name, instead of putting the name directly into the code.
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Many places in QEMU call qemu_aio_flush() to complete all pending
asynchronous I/O. Most of these places actually want to drain all block
requests but there is no block layer API to do so.
This patch introduces the bdrv_drain_all() API to wait for requests
across all BlockDriverStates to complete. As a bonus we perform checks
after qemu_aio_wait() to ensure that requests really have finished.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Xen_disk.c has support for using synchronous I/O instead of asynchronous,
but it is compiled out by default. Remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fsdriver callback that operate on file descriptor need to
differentiate between directory fd and file fd.
Based on the original patch from Sassan Panahinejad <sassan@sassan.me.uk>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
As per the 9p rfc, during TVERSION its necessary to clean all the active
fids, so that we start the session from a clean state. Its also needed in
scenarios where the guest is booting off 9p, and boot fails, and client
restarts, without any knowledge of the past, it will issue a TVERSION again
so this ensures that we always start from a clean state.
Signed-off-by: Deepak C Shetty <deepakcs@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Now when you try to migrate with VirtFS export path mounted, you get a proper QMP error:
(qemu) migrate tcp:localhost:4444
Migration is disabled when VirtFS export path '/tmp/' is mounted in the guest using mount_tag 'v_tmp'
(qemu)
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
handle fs driver require a set of newly added syscalls. Don't
Compile handle FS driver if those syscalls are not available.
Instead of adding #ifdef for all those syscalls we check for
open by handle syscall. If that is available then rest of the
syscalls used by the driver should be available.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Just for cleanliness; it would take a truly gigantic cursor to break.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
ATR size exceeding the limit is diagnosed, but then we merrily use it
anyway, overrunning card->atr[].
The message is read from a character device. Obvious security
implications unless the other end of the character device is trusted.
Spotted by Coverity. CVE-2011-4111.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I guess we can also make sure we don't call local_ioc_getversion at
all.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
According to Intel's Open Source Software Developer Manual,
the dump counters address must be Dword aligned.
The new code enforces this alignment, so s->statsaddr may now
be used with stw_le_pci_dma() and stl_le_pci_dma().
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
vdev->guest_features is not masking features that are not supported by
the guest. Fix this by introducing a common wrapper to be used by all
virtio bus implementations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Small requirements on "new" features have percolated to virtio-9p-local.c.
In particular, the utimensat wrapper actually only supports dirfd = AT_FDCWD
and flags = AT_SYMLINK_NOFOLLOW in the fallback code. Remove the arguments
so that virtio-9p-local.c will not use AT_* constants.
At the same time, fail local_ioc_getversion if the ioctl is not supported
by the host.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Also add omap_l4_region_size(), since memory API functions need
the size during initialization.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
This is a trivial wrapper around cpu_register_io_memory(), adding
no value. Inline it into all callers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
This was introduced apparently to overcome a limitation on the number of
cpu_register_io_memory() calls. 477b24ef91 (July 2008) removed use
of the hack, but retained the code. This patch removes the code as well.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrzej Zaborowski <balrogg@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Because the new API doesn't allow overlapping regions with just different
access sizes, we have to create a new "combined" region for both control
and data, when the two share an ioport offset.
Signed-off-by: Avi Kivity <avi@redhat.com>
Convert mechanicaly; the access size of the old_mmio fields
seems odd.
Signed-off-by: Benoit Canet <benoit.canet@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The ARM documentation say transfers between the cpu and the
coprocessor are 32 bits wide.
Use 4 as size for coprocessor read and writes.
Signed-off-by: Benoit Canet <benoit.canet@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The mmio register name list only had the names for four port status
registers. We emulate a EHCI adapter with six ports though, the last
two ones are listed as "unknown" in traces. Fix it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch makes iPXE work with the rtl8139 emulation. The rtl8139
driver in iPXE issues a 16bit access on the ChipCmd register
(offset 0x37) to check the status of the rx buffer. The offset of the
ioport access was getting fixed up to 0x36 in qemu, causing the value
read in iPXE to be invalid.
This fixes an issue with iPXE reporting timeouts during TFTP transfers.
Reposting this here because it is trivial enough and the original post
on qemu-devel didn't attract much attention.
Also, the inw() which was causing the issue has been replaced with an
inb() in upstream iPXE:
https://git.ipxe.org/ipxe.git/commit/91dd64ad25baa27954a7518e73df4fca8a2d0c93
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
When detaching devices from the usb hub we must wakeup too,
otherwise the host misses the detach event.
Commit 4a33a9ea06 does the
same for device attach.
Found by hkran@linux.vnet.ibm.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qdev doesn't call the ->exit callback on ->init failures, so we have to
take care ourself that we cleanup property on errors.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use qdev_init() instead of qdev_init_nofail(), usb device initialization
can fail, most common case being port and device speed mismatch. Handle
failures correctly and pass up NULL pointers then.
Also fixup usb_create_simple() callers (only one was buggy) to properly
check for NULL pointers before referncing the usb_create_simple() return
value.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no reason why a scsi-generic device cannot boot if it has
the right type, and indeed it provides already a bootindex property.
So register those devices too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The pre-1.0 firmware path for SCSI devices already included the LUN
using the suffix argument to add_boot_device_path. Avoid that it is
included twice, and convert the colons to commas for consistency with
other kinds of devices
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
USB mass storage devices are registered twice in the boot order.
To avoid having to keep the two paths in sync, pass the bootindex
property down to the scsi-disk device and let it register itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Ivshmem cannot work, and the command lspci cannot show ivshmem BAR2 in the guest.
As for pci_register_bar(), parameter MemoryRegion should be s->bar instead of s->ivshmem.
Reviewed-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Hongyong Zang <zanghongyong@huawei.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Check pending bit only if vector mask status changed.
This is not really important for qemu.git but helps
fix a bug in qemu-kvm.git.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
>From: Jan Kiszka <jan.kiszka@siemens.com>
Only accesses to the MSI-X table must trigger a call to
msix_handle_mask_update, otherwise the vector
value might be out of range.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only go over the table when function is masked.
This is not really important for qemu.git but helps
fix a bug in qemu-kvm.git.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
AT_REMOVEDIR is not defined on all systems. Pass the raw flags from the
9p protocol, which are always there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoid a conflict on the definition of struct file_handle by
using a replacement name.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now when you try to migrate with ivshmem, you get a proper QMP error:
(qemu) migrate tcp:localhost:1025
Migration is disabled when using feature 'peer mode' in device 'ivshmem'
(qemu)
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Coverity thinks q could be NULL there and warns.
I believe it can't be NULL there.
Add assert to prove it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Until recently all scsi commands sent to scsi-disk did either transfer
data or finished instantly. The correct implementation of
SYNCRONIZE_CACHE changed the picture though, and usb-storage needs
a fix to handle that case correctly.
Put status word into device state, fill it in command_complete, have
usb_msd_send_status just send it out.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usb_msd_send_status can be called from different code paths, move the
debug message into the function to make sure it is printed
unconditionally.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Happily passes (size_t)-1 to rom_add_blob_fixed(), which promptly dies
attempting to malloc that much. Spotted by Coverity.
Bonus fix for ROMs larger than INT_MAX bytes: return ssize_t instead
of int. Bug can't bite, because the only user load_aout() limits ROM
size to an int value.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 's390-1.0' of git://repo.or.cz/qemu/agraf:
s390x: initialize virtio dev region
tcg: Use TCGReg for standard tcg-target entry points.
tcg: Standardize on TCGReg as the enum for hard registers
s390x: Add shutdown for TCG s390-virtio machine
s390: Fix cpu shutdown for KVM
s390: fix short kernel command lines
s390: fix reset hypercall to reset the status
s390x: implement SIGP restart and shutdown
s390x: implement rrbe instruction properly
s390x: update R and C bits in storage key
s390x: make ipte 31-bit aware
s390x: add ldeb instruction
* 'ppc-1.0' of git://repo.or.cz/qemu/agraf:
pseries: Fix qdev.id handling in the VIO bus code
pseries: Allow kernel's early debug output to work
pseries: Default reg for vty should be SPAPR_VTY_BASE_ADDRESS
pseries: Check we have a chardev in spapr_vty_init()
pseries: Fix buggy spapr_vio_find_by_reg()
pseries: Correct RAM size check for SLOF
PPC: Fix for the gdb single step problem on an rfi instruction
tcg-ppc64: Fix compile errors for userspace only builds with gcc 4.6
pseries: Fix initialization of sPAPREnvironment structure