As we only store one element, there is nothing to consider regarding
exceptions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-30-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Instead of checking e.g. the first access on every touched page, we should
check the actual access, otherwise we might get false positives when Low
Address Protection (LAP) is active. As probe_write() can only deal with
accesses to one page, we have to loop.
Use i64 for the length, although not needed - easier to reuse
TCG temps we already have in the translation functions where this will
be used. Also allow it to be used from other helpers.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-28-david@redhat.com>
[CH: add missing page_check_range()]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Load both elements signed and store them into the two 64 bit elements.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-27-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Provide an implementation based on i64 and on real host vectors.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-26-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Similar to VECTOR GATHER ELEMENT, but the other direction.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-25-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Like VECTOR REPLICATE, but the element to be replicated comes from an
immediate.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-24-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Replicate via the special gvec helper.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-23-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Read the whole input before modifying the destination vector.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-22-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Take care of overlying inputs and outputs by using a temporary vector.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-21-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is a big one. Luckily we only have a limited set of such nasty
instructions.
We'll implement all variants with helpers, except when sources and
the destination don't overlap for VECTOR PACK. Provide different helpers
when the cc is to be modified. We'll return the cc then via env->cc_op.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-20-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We cannot use gvec expansion as source and destination elements are
have different element numbers. So we'll expand using a fancy loop.
Also, we have to take care of overlapping source and destination
registers, therefore use a safe evaluation irder depending on the
operation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-19-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We can reuse the helper introduced along with VECTOR LOAD TO BLOCK
BOUNDARY. We just have to take care of converting the highest index into
a length.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-18-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Fairly easy, just load from to gprs into a single vector.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Very similar to VECTOR LOAD GR FROM VR ELEMENT, just the opposite
direction. Also provide a fast path in case we don't care about the
register content.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Very similar to LOAD COUNT TO BLOCK BOUNDARY, but instead of only
calculating, the actual vector is loaded. Use a temporary vector to
not modify the real vector on exceptions. Initialize that one to zero,
to not leak any data. Provide a fast path if we're loading a full
vector.
As we don't have gvec ool handlers for single vectors, just calculate
the vector address manually.
We can reuse the helper later on for VECTOR LOAD WITH LENGTH. In fact,
we are going to name it "vll" right from the beginning, because that's
a better match.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-15-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Try to load the last element first. Access to the first element will
be checked afterwards. This way, we can guarantee that the vector is
not modified before we checked for all possible exceptions. (16 vectors
cannot cross more than two pages)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Fairly easy, zero out the vector before we load the desired element.
Load the element before touching the vector.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
To avoid an helper, we have to do the actual calculation of the element
address (offset in cpu_env + cpu_env) manually. Factor that out into
get_vec_element_ptr_i64(). The same logic will be reused for "VECTOR
LOAD VR ELEMENT FROM GR".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-12-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Take care of properly sign-extending the immediate.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Fairly easy, load with desired size and store it into the right element.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We can use tcg_gen_gvec_dup_i64() to carry out the duplication.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When loading from memory, load both elements into temps first before
modifying the target vector
Loading with strange alingment from the end of the address space will
not properly wrap, we can ignore that for now.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Add gen_gvec_dupi() for handling duplication of immediates, so it can
be reused later.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's optimize it for the common cases (setting a vector to zero or all
ones) - courtesy of Richard.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's start with a more involved one, but it is the first in the list
of vector support instructions (introduced with the vector facility).
Good thing is, we need a lot of basic infrastructure for this. Reading
and writing vector elements as well as checking element validity.
All vector instruction related translation functions will reside in
translate_vx.inc.c, to be included in translate.c - similar to how
other architectures handle it.
While at it, directly add some documentation (which contains parts about
things added in follow-up patches, but splitting this up does not make
too much sense). Also add ES_* defines heavily used later.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We'll have to read/write vector elements quite frequently from helpers.
The tricky bit is properly taking care of endianess. Handle it similar
to aarch64.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-4-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Check them at a central point. We'll use a new instruction flag to
flag all vector instructions (IF_VEC) and handle it very similar to
AFP, whereby we use another unused position in the PSW mask to store
the state of vector register enablement per translation block.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
These are the new instruction formats related to vector instructions as
up to the z14 (a.k.a. latest PoP).
As v2 appeares (like x2 in VRX) with d2/b2 in VRV, we have to assign it a
higher field number to avoid collisions.
Properly take care of the MSB (to be able to address 32 registers) for
each vector register field stored in the RXB field (Bit 36 - 30 for all
vector instructions). As we have 32 bit vector registers and the
"v" fields are only 4 bit in size, the 5th bit is stored in the RXB.
We use a new type to indicate that the MSB has to be fetched from the
RXB.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There are some fields in our struct LowCore which apparently have
been copied from a very old version of the Linux kernel. These
fields are not architected in the "Principles of Operation", and
only used on these memory locations in Linux kernels older than
2.6.29. Newer Linux kernels moved the entries to different locations
or are not using them at all anymore. Thus we should never access
these fields from the QEMU side, so they should be removed.
While we're at it, also add a QEMU_BUILD_BUG_ON() statement to
assert that struct LowCore has the right size.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1551775581-27989-1-git-send-email-thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The floating-point extension facility implemented certain changes to
BFP, HFP and DFP instructions.
As we don't implement HFP/DFP, we can ignore those completely. Related
to BFP, the changes include
- SET BFP ROUNDING MODE (SRNMB) instruction
- BFP-rounding-mode field in the FPC register is changed to 3 bits
- CONVERT FROM LOGICAL instructions
- CONVERT TO LOGICAL instructions
- Changes (rounding mode + XxC) added to
-- CONVERT TO FIXED
-- CONVERT FROM FIXED
-- LOAD FP INTEGER
-- LOAD ROUNDED
-- DIVIDE TO INTEGER
For TCG, we don't implement DIVIDE TO INTEGER, and it is harder to
implement, so skip that. Also, as we don't implement PFPO, we can skip
changes to that as well. The other parts are now implemented, we can
indicate the facility.
z14 PoP mentions that "The floating-point extension facility is installed
in the z/Architecture architectural mode. When bit 37 is one, bit 42 is
also one.", meaning that the DFP (decimal-floating-point) facility also
has to be indicated. We can ignore that for now.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-16-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
"round to nearest with ties away from 0" maps to float_round_ties_away.
"round to prepare for shorter precision" maps to float_round_to_odd.
As all instructions properly check for valid rounding modes in translate.c
we can add an assert. Fix one missing empty line.
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-15-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With the floating-point extension facility, LOAD ROUNDED has
a rounding mode specification and the inexact-exception control (XxC).
Handle them just like e.g. LOAD FP INTEGER.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With the floating-point extension facility
- CONVERT FROM LOGICAL
- CONVERT TO LOGICAL
- CONVERT TO FIXED
- CONVERT FROM FIXED
- LOAD FP INTEGER
have both, a rounding mode specification and the inexact-exception control
(XxC). Other instructions will be handled separatly.
Check for valid rounding modes and forward also the XxC (via m4). To avoid
a lot of boilerplate code and changes to the helpers, combine both, the
m3 and m4 field in a combined 32 bit TCG variable. Perform checks at
a central place, taking in account if the m3 or m4 field was ignore
before the floating-point extension facility was introduced.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-13-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Some instructions allow to suppress IEEE inexact exceptions.
z14 PoP, 9-23, "Suppression of Certain IEEE Exceptions"
IEEE-inexact-exception control (XxC): Bit 1 of
the M4 field is the XxC bit. If XxC is zero, recogni-
tion of IEEE-inexact exception is not suppressed;
if XxC is one, recognition of IEEE-inexact excep-
tion is suppressed.
Especially, handling for overflow/unerflow remains as is, inexact is
reported along
z14 PoP, 9-23, "Suppression of Certain IEEE Exceptions"
For example, the IEEE-inexact-exception control (XxC)
has no effect on the DXC; that is, the DXC for IEEE-
overflow or IEEE-underflow exceptions along with the
detail for exact, inexact and truncated, or inexact and
incremented, is reported according to the actual con-
dition.
Follow up patches will wire it correctly up for the applicable
instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-12-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We want to reuse this in the context of vector instructions. So use
better matching names and introduce s390_restore_bfp_rounding_mode().
While at it, add proper newlines.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's split handling of BFP/DFP rounding mode configuration. Also,
let's not reuse the sfpc handler, use a separate handler so we can
properly check for specification exceptions for SRNMB.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We already forward the 3 bits correctly in the translation functions. We
also have to handle them properly and check for specification
exceptions.
Setting an invalid rounding mode (BFP only, all DFP rounding modes)
results in a specification exception. Setting unassigned bits in the
fpc, results in a specification exception.
This fixes LOAD FPC (AND SIGNAL), SET FPC (AND SIGNAL). Also for,
SET BFP ROUNDING MODE, 3-bit rounding mode is now explicitly checked.
Note: TCG_CALL_NO_WG is required for sfpc handler, as we now inject
exceptions.
We won't be modeling abscence of the "floating-point extension facility"
for now, not necessary as most take the facility for granted without
checking.
z14 PoP, 9-23, "LOAD FPC"
When the floating-point extension facility is
installed, bits 29-31 of the second operand must
specify a valid BFP rounding mode and bits 6-7,
14-15, 24, and 28 must be zero; otherwise, a
specification exception is recognized.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-9-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The trap is triggered based on priority of the enabled signaling flags.
Only overflow and underflow allow a concurrent inexact exception.
z14 PoP, 9-33, Figure 9-21
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We can directly work on the uint64_t value, no need for a temporary
uint32_t value.
Also cleanup and shorten the comments.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
IEEE underflows are not reported when the mask bit is off and we don't
also have an inexact exception.
z14 PoP, 9-20, "IEEE Underflow":
An IEEE-underflow exception is recognized for an
IEEE target when the tininess condition exists and
either: (1) the IEEE-underflow mask bit in the FPC
register is zero and the result value is inexact, or (2)
the IEEE-underflow mask bit in the FPC register is
one.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Many things are wrong and some parts cannot be fixed yet. Fix what we
can fix easily and add two FIXMEs:
The fpc flags are not updated in case an exception is actually injected.
Inexact exceptions have to be handled separately, as they are the only
exceptions that can coexist with underflows and overflows.
I reread the horribly complicated chapters in the PoP at least 5 times
and hope I got it right.
For references:
- z14 PoP, 9-18, "IEEE Exceptions"
- z14 PoP, 19-9, Figure 19-8
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We want to reuse that function in vector instruction context. While at it,
cleanup the code, using defines for magic values and avoiding the
handcrafted bit conversion.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's use the proper conversion functions now that we have them.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's detect normal and denormal ("subnormal") numbers reliably. Also
test for quiet NaN's. As only one class is possible, test common cases
first.
While at it, use a better check to test for the mask bits in the data
class mask. The data class mask has 12 bits, whereby bit 0 is the
leftmost bit and bit 11 the rightmost bit. In the PoP an easy to read
table with the numbers is provided for the VECTOR FP TEST DATA CLASS
IMMEDIATE instruction, the table for TEST DATA CLASS is more confusing
as it is based on 64 bit values.
Factor the checks out into separate functions, as they will also be
needed for floating point vector instructions. We can use a makro to
generate the functions.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218122710.23639-2-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Use a new CC helper to calculate the CC lazily if needed. While the
PoP mentions that "A 32-bit unsigned binary integer" is placed into the
first operand, there is no word telling that the other 32 bits (high
part) are left untouched. Maybe the other 32-bit are unpredictable.
So store 64 bit for now.
Bit magic courtesy of Richard.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190225200318.16102-8-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Nice trick to load a 32 bit value into vector element 0 (32 bit element
size) from memory, zeroing out element1. The short HFP to long HFP
conversion really only is a shift.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190225200318.16102-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Also properly wrap in 24bit mode. While at it, convert the comment (and
drop the comment about fundamental TCG optimizations).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190225200318.16102-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We'll use that a lot along with gvec helpers, to calculate the start
address of a vector.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190225200318.16102-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We will use s390x speak "Element Size" (es) for MO_8 == 0, MO_16 == 1
... Simple rename of variables.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190225200318.16102-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Will be needed, so add it to the format description.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190225200318.16102-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If we have vector registers and the designation is not zero, we have
to try to write the vector registers. If the designation is zero or
if storing fails, we must not indicate validity. s390_build_validity_mcic()
automatically already sets validity if the vector instruction facility
is installed.
As long as we don't support the guarded-storage facility, the alignment
and size of the area is always 1024 bytes.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190222081153.14206-4-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Convert this to QEMU style.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190222081153.14206-3-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As we will support vector instructions soon, and vector registers are
stored in 64bit host chunks, let's use cpu_to_be64. Same applies to the
guarded storage control block.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190222081153.14206-2-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
-----BEGIN PGP SIGNATURE-----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=pNCA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2019-02-18' into staging
QAPI patches for 2019-02-18
# gpg: Signature made Mon 18 Feb 2019 13:44:30 GMT
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2019-02-18:
qapi: move RTC_CHANGE to the target schema
qmp: Deprecate query-events in favor of query-qmp-schema
Revert "qapi-events: add 'if' condition to implicit event enum"
qapi: remove qmp_unregister_command()
qapi: make query-cpu-definitions depend on specific targets
qapi: make query-cpu-model-expansion depend on s390 or x86
qapi: make query-gic-capabilities depend on TARGET_ARM
target.json: add a note about query-cpu* not being s390x-specific
qapi: make s390 commands depend on TARGET_S390X
qapi: make rtc-reset-reinjection and SEV depend on TARGET_I386
qapi: New module target.json
build: Deal with all of QAPI's .o in qapi/Makefile.objs
build-sys: move qmp-introspect per target
qapi: Generate QAPIEvent stuff into separate files
qapi: Prepare for system modules other than 'builtin'
qapi: Clean up modular built-in code generation a bit
qapi: Fix up documentation for recent commit a95291007b
qapi: Belatedly document modular code generation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce the z14 GA2 cpu model for QEMU. There are no new features
introduced with this model, and will inherit the same feature set as
z14 GA1.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190212011657.18324-3-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Latest systems and host kernels support mepoch, which is a
feature that was meant to be supported for z14 GA1 from the
get-go. Let's copy it to the z14 GA1 default CPU model.
Machines s390-ccw-virtio-3.1 and older will retain the old CPU
models and will not provide this bit nor the extended PTFF
functions in the default model.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-Id: <20190212011657.18324-2-walling@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The extended PTFF features (qsie, qtoue, stoe, stoue) are dependent
on the multiple-epoch facility (mepoch). Let's print a warning if these
features are enabled without mepoch.
While we're at it, let's move the FEAT_GROUP_INIT for mepochptff down
the s390_feature_groups list so it can be properly indexed with its
generated S390FeatGroup enum.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-Id: <20190212011657.18324-1-walling@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As we now always have PCI support, let's add it to the "qemu" CPU model,
taking care of backwards compatibility.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190212112323.15904-1-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is a non-privileged instruction that was only implemented
for system mode. However, the stck instruction is used by glibc,
so this was causing SIGILL for programs run under debian stretch.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190212053044.29015-3-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We will need these from CONFIG_USER_ONLY as well,
which cannot access include/hw/.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190212053044.29015-2-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We tried to make pci support optional on s390x in the past;
unfortunately, we still require the s390 phb to be created
unconditionally due to backwards compatibility issues.
Instead of sinking more effort into this (including compat
handling for older machines etc.) for non-obvious gains, let's
just make CONFIG_PCI something that is always set on s390x.
Note that you can still fence off pci for the _guest_ if you
provide a cpu model without the zpci feature.
Message-Id: <20190211113255.3837-1-cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The license information in these files is rather confusing. The text
declares LGPL first, but then says that contributions after 2012 are
licensed under the GPL instead. How should the average user who just
downloaded the release tarball know which part is now GPL and which
is LGPL?
Looking at the text of the LGPL (see COPYING.LIB in the top directory),
the license clearly states how this should be done instead:
"3. You may opt to apply the terms of the ordinary GNU General Public
License instead of this License to a given copy of the Library. To do
this, you must alter all the notices that refer to this License, so
that they refer to the ordinary GNU General Public License, version 2,
instead of to this License."
Thus let's clean up the confusing statements and use the proper GPL
text only.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1549456893-16589-1-git-send-email-thuth@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As floating point registers overlay some vector registers and we want
to make use of the general tcg_gvec infrastructure that assumes vectors
are not stored in globals but in memory, don't model floating point
registers as globals anymore. This is then similar to how arm handles
it.
Reading/writing a floating point register means reading/writing memory now.
Break up ugly in2_x2() handling that modifies both, in1 and in2 into
in2_x2l and in2_x2h. This makes things more readable. Also, in1_x1() is
ugly as it touches out/out2, get rid of that and use prep_x1() instead.
As we are no longer able to use the original global variables for
out/out2, we have to use new temporary variables and write from them to
the target registers using wout_ helpers.
E.g. an instruction that reads and writes x1 will use
- prep_x1 to get the values into out/out2
- wout_x1 to write the values from out/out2
This special handling is needed for x1 as it is often used along with
other inputs, so in1/in2 is already used.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190204154406.16122-1-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
I plan to deprecate -mem-path option and replace it with memory-backend,
for that it's necessary to get rid of mem_path global variable.
Do it for s390x case, replacing it with alternative way to enable
1Mb hugepages capability.
Todo that replace qemu_mempath_getpagesize() with qemu_getrampagesize()
which also checks for -mem-path provided RAM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <1548834906-133241-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
MTTCG should be enabled by default whenever the memory model allows
it. s390x was missing its definition of TCG_GUEST_DEFAULT_MO meaning
the user had to manually specify --accel tcg,thread=multi.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: David Hildenbrand <david@redhat.com>
Message-Id: <20190118171848.27332-1-alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It's either "GNU *Library* General Public License version 2" or
"GNU Lesser General Public License version *2.1*", but there was
no "version 2.0" of the "Lesser" license. So assume that version
2.1 is meant here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1548769067-20792-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The architecture specifies specification exceptions for all
unavailable subcodes.
The presence of subcodes is indicated by checking some query subcode.
For example 6 will indicate that 3-6 are available. So future systems
might call new subcodes to check for new features. This should not
trigger a hw error, instead we return the architectured specification
exception.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20190111113657.66195-3-frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When op raises an exception, it may not have initialized the output
temps that would be written back by wout or cout.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let's use the KVM_SET_DEVICE_ATTR ioctl to enable hardware
interpretation of AP instructions executed on the guest.
If the S390_FEAT_AP feature is switched on for the guest,
AP instructions must be interpreted by default; otherwise,
they will be intercepted.
This attribute setting may be overridden by a device. For example,
a device may want to provide AP instructions to the guest (i.e.,
S390_FEAT_AP turned on), but it may want to emulate them. In this
case, the AP instructions executed on the guest must be
intercepted; so when the device is realized, it must disable
interpretation.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20181010170309.12045-4-akrowiak@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
A new CPU model feature and two new CPU model facilities are
introduced to support AP devices for a KVM guest.
CPU model features:
1. The S390_FEAT_AP CPU model feature indicates whether AP
instructions are available to the guest. This feature will
be enabled only if the AP instructions are available on the
linux host as determined by the availability of the
KVM_S390_VM_CRYPTO_ENABLE_APIE VM attribute which is exposed
by KVM only if the AP instructions are available on the
host.
This feature must be turned on from userspace to execute AP
instructions on the KVM guest. The QEMU command line to turn
this feature on looks something like this:
qemu-system-s390x ... -cpu xxx,ap=on ...
This feature will be supported for zEC12 and newer CPU models.
The feature will not be supported for older models because
there are few older systems on which to test and the older
crypto cards will be going out of service in the relatively
near future.
CPU model facilities:
1. The S390_FEAT_AP_QUERY_CONFIG_INFO feature indicates whether the
AP Query Configuration Information (QCI) facility is available
to the guest as determined by whether the facility is available
on the host. This feature will be exposed by KVM only if the
QCI facility is installed on the host.
2. The S390_FEAT_AP_FACILITY_TEST feature indicates whether the AP
Facility Test (APFT) facility is available to the guest as
determined by whether the facility is available on the host.
This feature will be exposed by KVM only if APFT is installed
on the host.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20181010170309.12045-3-akrowiak@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Debug macros that are disabled by default should be avoided (since the
code bit-rots quite easily). Thus turn these debug prints into proper
qemu_log_mask(CPU_LOG_xxx, ...) statements instead. The DPRINTF statements
in do_[ext|io|mchk]_interrupt can even be removed completely since we can
log the information in a central place, s390_cpu_do_interrupt, instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1538751601-7433-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
linux-user should always enable AFP, otherwise our emulated binary
might crash once it tries to make use of additional floating-point
registers or instructions.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alex Bennée <alex.bennee@linaro.org>
Fixes: db0504154e ("s390x/tcg: check for AFP-register, BFP and DFP data exceptions")
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can fit this nicely into less LOC, without harming readability.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Valid register pairs are 0/2, 1/3, 4/6, 5/7, 8/10, 9/11, 12/14, 13/15.
R1/R2 always selects the lower number, so the current checks are not
correct as e.g. 2/4 could be selected as a pair.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's check this also at a central place.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-8-david@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With the annotated functions, we can now easily check this at a central
place.
DXC 1 is to be injected if an AFP register is used (for a HFP AND FPS
instruction) when AFP is disabled.
DXC 2 is to be injected if a BFP instruction is used when AFP is
disabled.
DXC 3 is to be injected if a DFP instruction is used when AFP is
disabled.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
These flags allow us to later on detect if a DATA program interrupt
is to be injected, and which DXC (1,2,3) is to be used.
Interestingly, some support FP instructions are considered as HFP
instructions (I assume simply because they were available very early).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-6-david@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Storing flags for instructions allows us to efficiently verify certain
properties at a central point. Examples might later be handling if
AFP is disabled in CR0, we are not in problem state, or if vector
instructions are disabled in CR0.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We exit the TB when changing the control registers, so just like PSW
bits, this should always be consistent for a TB.
Using the PSW bit semantic makes things a lot easier compared to
manually defining the spare, shifted bits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The DXC is to be stored in the low core, and only in the FPC in case AFP
is enabled in CR0. Stub is not required in current code, but this way
we never run into problems.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Move it into TCG-only code and provide a stub. Turn it into noreturn.
As Richard noted, we currently don't log the psw.addr before restoring
the state, fix that by moving (duplicating) the qemu_log_mask in the
tcg/kvm handlers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Both LPSW and LPSWE should raise a specification exception when their
operand is not doubleword aligned.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180902003322.3428-3-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As the kernel has no way of disallowing the start of a huge page
backed VM, we can migrate a running huge backed VM to a host that has
no huge page KVM support.
Let's glue huge page support support to the 3.1 machine, so we do not
migrate to a destination host that doesn't have QEMU huge page support
and can stop migration if KVM doesn't indicate support.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20180928093435.198573-1-frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In a few places translate.c contains non-breaking spaces (0xc2 0xa0)
instead of regular ones (0x20):
7c 7c c2 a0 63 63
7c 7c 20 63 63
| | c c
This confuses some text editors.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180822144039.5796-2-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
PACK fails on the test from the Principles of Operation: F1F2F3F4
becomes 0000234C instead of 0001234C due to an off-by-one error.
Furthermore, it overwrites one extra byte to the left of F1.
If len_dest is 0, then we only want to flip the 1st byte and never loop
over the rest. Therefore, the loop condition should be > and not >=.
If len_src is 1, then we should flip the 1st byte and pack the 2nd.
Since len_src is already decremented before the loop, the first
condition should be >=, and not >.
Likewise for len_src == 2 and the second condition.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180821025104.19604-7-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Improves "b213c9f5: target/s390x: Implement TRTR" by introducing the
intermediate functions, which are compatible with dx_helper type.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180821025104.19604-6-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Suppose psw.mask=0x0000000080000000, cc=2, r1=0 and we do "ipm 1".
This command must touch only bits 32-39, so the expected output
is r1=0x20000000. However, currently qemu yields r1=0x20008000,
because irrelevant parts of PSW leak into r1 during program mask
transfer.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180821025104.19604-5-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
CSST is defined as:
C(0xc802, CSST, SSF, CASS, la1, a2, 0, 0, csst, 0)
It means that the first parameter is handled by in1_la1().
in1_la1() fills addr1 field, and not in1.
Furthermore, when extract32() is used for the alignment check, the
third parameter should specify the number of trailing bits that must
be 0. For FC these numbers are:
FC=0 (word, 4 bytes): 2
FC=1 (double word, 8 bytes): 3
FC=2 (quad word, 16 bytes): 4
For SC these numbers correspond to the size:
SC=0: 0
SC=1: 1
SC=2: 2
SC=3: 3
SC=4: 4
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180821025104.19604-4-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
These instructions are provided for compatibility purposes and are
used only by old software, in the new code BAS and BASR are preferred.
The difference between the old and new instruction exists only in the
24-bit mode.
In addition, fix BAS polluting high 32 bits of the first operand in
24- and 31-bit addressing modes.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180821025104.19604-3-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Iterating over the list without using atomics is undefined behaviour,
since the list can be modified concurrently by other threads (e.g.
every time a new thread is created in user-mode).
Fix it by implementing the CPU list as an RCU QTAILQ. This requires
a little bit of extra work to traverse list in reverse order (see
previous patch), but other than that the conversion is trivial.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-12-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU has had huge page support for a longer time already, but KVM
memory management under s390x needed some changes to work with huge
backings.
Now that we have support, let's enable it if requested and
available. Otherwise we now properly tell the user if there is no
support and back out instead of failing to run the VM later on.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180802070201.257406-1-frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Provide the etoken facility. We need to handle cpu model, migration and
clear reset.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20180731090448.36662-3-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The "max" CPU model behaves like "-cpu host" when KVM is enabled, and like
a CPU with the maximum possible feature set when TCG is enabled.
While the "host" model can not be used under TCG ("kvm_required"), the
"max" model can and "Enables all features supported by the accelerator in
the current host".
So we can treat "host" just as a special case of "max" (like x86 does).
It differs to the "qemu" CPU model under TCG such that compatibility
handling will not be performed and that some experimental CPU features
not yet part of the "qemu" model might be indicated.
These are right now under TCG (see "qemu_MAX"):
- stfle53
- msa5-base
- zpci
This will result right now in the following warning when starting QEMU TCG
with the "max" model:
"qemu-system-s390x: warning: 'msa5-base' requires 'kimd-sha-512'."
The "qemu" model (used as default in QEMU under TCG) will continue to
work without such warnings. The "max" model in the current form
might be interesting for kvm-unit-tests (where we would e.g. now also
test "msa5-base").
The "max" model is neither static nor migration safe (like the "host"
model). It is independent of the machine but dependends on the accelerator.
It can be used to detect the maximum CPU model also under TCG from upper
layers without having to care about CPU model names for CPU model
expansion.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180725091233.3300-1-david@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[CH: minor wording changes]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This option has been deprecated for two releases; remove it.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The enumeration type S390FeatGroup is now generated as well.
This shall simplify the definition of new feature groups
without the requirement to modify existing code.
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Message-Id: <20180725143617.8731-1-mimu@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Usually, when baselining two CPU models, whereby one of them has base
CPU features disabled (e.g. z14-base,msa=off), we fallback to an older
model that did not have these features in the base model. We always try to
create a "sane" CPU model (as far as possible), and one part of it is that
removing base features is no good and to be avoided.
Now, if we disable base features that were part of a z900, we're out of
luck. We won't find a CPU model and QEMU will segfault. This is a
scenario that should never happen in real life, but it can be used to
crash QEMU.
So let's properly report an error if we baseline e.g.:
{ "execute": "query-cpu-model-baseline",
"arguments" : { "modela": { "name": "z14-base", "props": {"esan3" : false}},
"modelb": { "name": "z14"}} }
Instead of segfaulting.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180718092330.19465-1-david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
tcg_s390_tod_updated() is always called with the iothread being locked
(e.g. from S390TODClass->set() e.g. via HELPER(sck) or on incoming
migration). The helper we call takes the lock itself - bad.
Let's change that by factoring out updating the ckc timer. This now looks
much nicer than having to call a helper from another function.
While touching it we also make sure that env->ckc is updated even if the
new value is -1ULL, for now it would not have been modified in that case.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180629170520.13671-1-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's do this for completeness reason, although we don't support e.g.
PCDIMM/NVDIMM, which would use the alignment for placing the memory
region in guest physical memory. But maybe someday we would want to
support something like this - then we don't forget about this if
allowing multiple allocations in legacy_s390_alloc().
Use the same alignment as we would set in qemu_anon_ram_alloc(). Our
fixed address satisfies this alignment (1MB). This implicitly sets the
alignment of the underlying memory region.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180628113817.30814-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We always allocate at a fixed address, a second allocation can therefore
of course never work. We would simply overwrite mappings.
This can e.g. happen in s390_memory_init(), if trying to allocate more
than > 8TB. Let's just bail out, as there is no need for supporting it
(legacy handling for z/VM).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180628113817.30814-2-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
run_on_cpu() doesn't seem to work reliably until the CPU has been fully
created if the single-threaded TCG main loop is already running.
Therefore, hotplugging a CPU under single-threaded TCG does currently
not work. We should use the direct call instead of going via
run_on_cpu().
So let's use run_on_cpu() for KVM only - KVM requires it due to the initial
CPU reset ioctl. As a nice side effect, we get rid of the ifdef.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If the CPU data is migrated after the TOD clock, the CKC timer of a CPU
is not rearmed. Let's rearm it when loading the CPU state.
Introduce tcg-stub.c just like kvm-stub.c for tcg specific stubs.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This allows a guest to change its TOD. We already take care of updating
all CKC timers from within S390TODClass.
Use MO_ALIGN to load the operand manually - this will properly trigger a
SPECIFICATION exception.
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's stop the timer and delete any pending CKC IRQ before doing
anything else.
While at it, add a comment why the check for ckc == -1ULL is needed.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Right now, each CPU has its own TOD. Especially, the TOD will differ
based on creation time of a CPU - e.g. when hotplugging a CPU the times
will differ quite a lot, resulting in stall warnings in the guest.
Let's use a single TOD by implementing our new TOD device. Prepare it
for TOD-clock epoch extension.
Most importantly, whenever we set the TOD, we have to update the CKC
timer.
Introduce "tcg_s390x.h" just like "kvm_s390x.h" for tcg specific
function declarations that should not go into cpu.h.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Never set to anything but 0.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's treat this like a separate device. TCG will have to store the
actual state/time later on.
Include cpu-qom.h in kvm_s390x.h (due to S390CPU) to compile tod-kvm.c.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We are going to factor out the TOD into a separate device and use const
pointers for device class functions where possible. We are passing right
now ordinary pointers that should never be touched when setting the TOD.
Let's just pass the values directly.
Note that s390_set_clock() will be removed in a follow-on patch and
therefore its calling convention is not changed.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Big values for the TOD/ns clock can result in some overflows that can be
avoided. Not all overflows can be handled however, as the conversion either
multiplies by 4.096 or divided by 4.096.
Apply the trick used in the Linux kernel in arch/s390/include/asm/timex.h
for tod_to_ns() and use the same trick also for the conversion in the
other direction.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Most systems and host kernels provide the necessary building blocks for
bpb and ppa15. We can reverse the logic and default enable those
features, while still allowing to disable it via cpu model.
So let us add bpb and ppa15 to z196 and later default CPU model for the
qemu 3.0 machine. (like -cpu z13). Older machine types (e.g.
s390-ccw-virtio-2.12) will retain the old value and not provide those
bits in the default model.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180626123830.18282-1-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Determining the size of a field is useful when you don't have a struct
variable handy. Open-coding this is ugly.
This patch adds the sizeof_field() macro, which is similar to
typeof_field(). Existing instances are updated to use the macro.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180614164431.29305-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce the new z14 Model ZR1 cpu model. Mostly identical to z14, only
the cpu type differs (3906 vs. 3907)
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180613081819.147178-1-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Do the cast to uintptr_t within the helper, so that the compiler
can type check the pointer argument. We can also do some more
sanity checking of the index argument.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to address_space_access_valid().
Its callers either have an attrs value to hand, or don't care
and can use MEMTXATTRS_UNSPECIFIED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-6-peter.maydell@linaro.org
Also do not dump both "fpu" and "vector" registers
as the former overlaps the latter.
Cc: Alexander Graf <agraf@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is now handled properly by the generic softfloat code.
Cc: Alexander Graf <agraf@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The warning is
target/s390x/misc_helper.c:209:21: error: suggest
braces around initialization of subobject [-Werror,-Wmissing-braces]
SysIB sysib = { 0 };
^
{}
While the original code is correct, and technically exactly correct
as per ISO C89, both GCC and Clang support plain empty set of braces
as an extension.
Cc: Alexander Graf <agraf@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512045950.12386-5-richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Calling pause_all_vcpus()/resume_all_vcpus() from a VCPU thread might
not be the best idea. As pause_all_vcpus() temporarily drops the qemu
mutex, two parallel calls to pause_all_vcpus() can be active at a time,
resulting in a deadlock. (either by two VCPUs or by the main thread and a
VCPU)
Let's handle it via the main loop instead, as suggested by Paolo. If we
would have two parallel reset requests by two different VCPUs at the
same time, the last one would win.
We use the existing ipl device to handle it. The nice side effect is
that we can get rid of reipl_requested.
This change implies that all reset handling now goes via the common
path, so "no-reboot" handling is now active for all kinds of reboots.
Let's execute any CPU initialization code on the target CPU using
run_on_cpu.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180424101859.10239-1-david@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Note: I looked into dropping dc->do_debug. However, I don't see
an easy way to do it given that TOO_MANY is also valid
when we just translate more than max_insns. Thus, the check
for do_debug in "case DISAS_PC_CC_UPDATED" would still need
additional state to know whether or not we came from
breakpoint_check.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: David Hildenbrand <david@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Notes:
- Did not convert {num,max}_insns and is_jmp, since the corresponding
code will go away in the next patch.
- Avoided a checkpatch error in use_exit_tb.
- As suggested by David, (1) Drop ctx.pc and use
ctx.base.pc_next instead, and (2) Rename ctx.next_pc to
ctx.pc_tmp and add a comment about it.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only non-trivial modification is the use of DISAS_TOO_MANY
in the same way is used by the generic translation loop.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=Kukn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2018-05-04' into staging
QAPI patches for 2018-05-04
# gpg: Signature made Fri 04 May 2018 08:59:16 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2018-05-04:
qapi: deprecate CpuInfoFast.arch
qapi: discriminate CpuInfoFast on SysEmuTarget, not CpuInfoArch
qapi: change the type of TargetInfo.arch from string to enum SysEmuTarget
qapi: add SysEmuTarget to "common.json"
qapi: fill in CpuInfoFast.arch in query-cpus-fast
qobject: Modify qobject_ref() to return obj
qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREF
qobject: use a QObjectBase_ struct
qobject: Ensure base is at offset 0
qobject: Use qobject_to() instead of type cast
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We have a call to cpu_synchronize_state() on every kvm_arch_handle_exit().
Let's remove the ones that are no longer needed.
Remaining places (for s390x) are in
- target/s390x/sigp.c, on the target CPU
- target/s390x/cpu.c:s390_cpu_get_crash_info()
While at it, use kvm_cpu_synchronize_state() instead of
cpu_synchronize_state() in KVM code. (suggested by Thomas Huth)
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180412093521.2469-1-david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's simplify it a bit. On some weird circumstances we would have
tried to recompute watchpoints when running under KVM. load_psw() is
called from do_restart_interrupt() during a SIGP RESTART if the target
CPU is STOPPED. Let's touch watchpoints only in the TCG case - where
they are used for PER emulation.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180409113019.14568-3-david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If we already triggered another exception, don't overwrite it with a
protection exception.
Only applies to old KVM instances without the virtual memory access
IOCTL in KVM.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180409113019.14568-2-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Manually having to use cpu_synchronize_state() is error prone. And as
Christian Borntraeger discovered, e.g. handle_diag() is currently
missing a cpu_synchronize_state(), as decode_basedisp_s() uses a
general purpose register value internally.
So let's do an overall cpu_synchronize_state(), which fixes at least the
one mentioned BUG. We will clean up the superfluous cpu_synchronize_state()
calls later.
We now also call it (although maybe not neded) for
- KVM_EXIT_S390_RESET -> s390_reipl_request()
- KVM_EXIT_DEBUG -> kvm_arch_handle_debug_exit()
- unmanagable/unimplemented intercepts
- ICPT_CPU_STOP -> do_stop_interrupt() -> cpu gets halted
- Scenarios where we inject an operation exception
- handle_stsi()
I don't think any of these are performance critical. Especially as we
have all information directly contained in kvm_run, there are no
additional IOCTLs to issue on modern kernels.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180406093552.13016-1-david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Since commit 46a99c9f73 ("s390x/cpumodel: model PTFF subfunctions
for Multiple-epoch facility") -cpu help no longer shows the MSA8
feature group. Turns out that we forgot to add the new MEPOCH_PTFF
group enum.
Fixes: 46a99c9f73 ("s390x/cpumodel: model PTFF subfunctions for Multiple-epoch facility")
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch was generated using the following Coccinelle script:
@@
expression Obj;
@@
(
- qobject_to_qnum(Obj)
+ qobject_to(QNum, Obj)
|
- qobject_to_qstring(Obj)
+ qobject_to(QString, Obj)
|
- qobject_to_qdict(Obj)
+ qobject_to(QDict, Obj)
|
- qobject_to_qlist(Obj)
+ qobject_to(QList, Obj)
|
- qobject_to_qbool(Obj)
+ qobject_to(QBool, Obj)
)
and a bit of manual fix-up for overly long lines and three places in
tests/check-qjson.c that Coccinelle did not find.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: swap order from qobject_to(o, X), rebase to master, also a fix
to latent false-positive compiler complaint about hw/i386/acpi-build.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
cpu_init(cpu_model) were replaced by cpu_create(cpu_type) so
no users are left, remove it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc)
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1518000027-274608-6-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
it will be used for providing to cpu name resolving class for
parsing cpu model for system and user emulation code.
Along with change add target to null-machine tests, so
that when switch to CPU_RESOLVING_TYPE happens,
it would ensure that null-machine usecase still works.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu> (m68k)
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc)
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> (tricore)
Message-Id: <1518000027-274608-4-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Added macro to riscv too]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We should not use leading underscores followed by a capital letter
in #defines since such identifiers are reserved by the C standard.
For ASCE_ORIGIN, REGION_ENTRY_ORIGIN and SEGMENT_ENTRY_ORIGIN I also
added parentheses around the value to silence an error message from
checkpatch.pl.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1520227018-4061-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Let's also put the 31-bit hack in front of the REAL MMU, otherwise right
now we get errors when loading a PSW where the highest bit is set (e.g.
via s390-netboot.img). The highest bit is not masked away, therefore we
inject addressing exceptions into the guest.
The proper fix will later be to do all address wrapping before accessing
the MMU - so we won't get any "wrong" entries in there (which makes
flushing also easier). But that will require more work (wrapping in
load_psw, wrapping when incrementing the PC, wrapping every memory
access).
This fixes the tests/pxe-test test.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180301120826.6847-1-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Not needed anymore after removal of the memory hotplug code.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
From an architecture point of view, nothing can be mapped into the address
space on s390x. All there is is memory. Therefore there is also not really
an interface to communicate such information to the guest. All we can do is
specify the maximum ram address and guests can probe in that range if
memory is available and usable (TPROT).
Also memory hotplug is strange. The guest can decide at some point in
time to add / remove memory in some range. While the hypervisor can deny
to online an increment, all increments have to be predefined and there is
no way of telling the guest about a newly "hotplugged" increment. So if we
specify right now e.g.
-m 2G,slots=2,maxmem=20G
An ordinary fedora guest will happily online (hotplug) all memory,
resulting in a guest consuming 20G. So it really behaves rather like
-m 22G
There is no way to hotplug memory from the outside like on other
architectures. This is of course bad for upper management layers.
As the guest can create/delete memory regions while it is running, of
course migration support is not available and tricky to implement.
With virtualization, it is different. We might want to map something
into guest address space (e.g. fake DAX devices) and not detect it
automatically as memory. So we really want to use the maxmem and slots
parameter just like on all other architectures. Such devices will have
to expose the applicable memory range themselves. To finally be able to
provide memory hotplug to guests, we will need a new paravirtualized
interface to do that (e.g. something into the direction of virtio-mem).
This implies, that maxmem cannot be used for s390x memory hotplug
anymore and has to go. This simplifies the code quite a bit.
As migration support is not working, this change cannot really break
migration as guests without slots and maxmem don't see the SCLP
features. Also, the ram size calculation does not change.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180219174231.10874-1-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
[CH: tweaked patch description, as discussed on list]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The 'bit' field of the 'S390FeatDef' structure is not applicable to all
its instances. Currently this field is not applicable, and remains
unused, iff the feature is of type S390_FEAT_TYPE_MISC. Having the value 0
specified for multiple such feature definitions was a little confusing,
as it's a perfectly legit bit value, and as the value of the bit
field is usually ought to be unique for each feature of a given
feature type.
Let us introduce a specialized macro for defining features of type
S390_FEAT_TYPE_MISC so, that one does not have to specify neither bit nor
type (as the latter is implied).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20180221165628.78946-1-pasic@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Presently s390x is the only architecture not exposing specific
CPU information via QMP query-cpus. Upstream discussion has shown
that it could make sense to report the architecture specific CPU
state, e.g. to detect that a CPU has been stopped.
With this change the output of query-cpus will look like this on
s390:
[
{"arch": "s390", "current": true,
"props": {"core-id": 0}, "cpu-state": "operating", "CPU": 0,
"qom_path": "/machine/unattached/device[0]",
"halted": false, "thread_id": 63115},
{"arch": "s390", "current": false,
"props": {"core-id": 1}, "cpu-state": "stopped", "CPU": 1,
"qom_path": "/machine/unattached/device[1]",
"halted": true, "thread_id": 63116}
]
This change doesn't add the s390-specific data to HMP 'info cpus'.
A follow-on patch will remove all architecture specific information
from there.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1518797321-28356-2-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's add proper alignment checks for a handful of instructions that
require a SPECIFICATION exception in case alignment is violated.
Introduce new wout/in functions. As we are right now only using them for
privileged instructions, we have to add ugly ifdefs to silence
compilers.
Convert STORE CPU ID right away to make use of the wout function.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180215103822.15179-1-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Currently, all memory accesses go via the MMU of the address space
(primary, secondary, ...). This is bad, because we don't flush the TLB
when disabling/enabling DAT. So we could add a tlb flush. However it
is easier to simply select the MMU we already have in place for real
memory access.
All we have to do is point at the right MMU and allow to execute these
pages.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180213161240.19891-1-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[CH: get rid of tabs]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This patch is the s390 implementation of guest crash information,
similar to commit d187e08dc4 ("i386/cpu: add crash-information QOM
property") and the related commits. We will detect several crash
reasons, with the "disabled wait" being the most important one, since
this is used by all s390 guests as a "panic like" notification.
Demonstrate these ways with examples as follows.
1. crash-information QOM property;
Run qemu with -qmp unix:qmp-sock,server, then use utility "qmp-shell"
to execute "qom-get" command, and might get the result like,
(QEMU) (QEMU) qom-get path=/machine/unattached/device[0] \
property=crash-information
{"return": {"core": 0, "reason": "disabled-wait", "psw-mask": 562956395872256, \
"type": "s390", "psw-addr": 1102832}}
2. GUEST_PANICKED event reporting;
Run qemu with a socket option, and telnet or nc to that,
-chardev socket,id=qmp,port=4444,host=localhost,server \
-mon chardev=qmp,mode=control,pretty=on \
Negotiating the mode by { "execute": "qmp_capabilities" }, and the crash
information will be reported on a guest crash event like,
{
"timestamp": {
"seconds": 1518004739,
"microseconds": 552563
},
"event": "GUEST_PANICKED",
"data": {
"action": "pause",
"info": {
"core": 0,
"psw-addr": 1102832,
"reason": "disabled-wait",
"psw-mask": 562956395872256,
"type": "s390"
}
}
}
3. log;
Run qemu with the parameters: -D <logfile> -d guest_errors, to
specify the logfile and log item. The results might be,
Guest crashed on cpu 0: disabled-wait
PSW: 0x0002000180000000 0x000000000010d3f0
Co-authored-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180209122543.25755-1-borntraeger@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[CH: tweaked qapi comment]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As cpu.h is another typically widely included file which doesn't need
full access to the softfloat API we can remove the includes from here
as well. Where they do need types it's typically for float_status and
the rounding modes so we move that to softfloat-types.h as well.
As a result of not having softfloat in every cpu.h call we now need to
add it to various helpers that do need the full softfloat.h
definitions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[For PPC parts]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Currently only file backed memory backend can
be created with a "share" flag in order to allow
sharing guest RAM with other processes in the host.
Add the "share" flag also to RAM Memory Backend
in order to allow remapping parts of the guest RAM
to different host virtual addresses. This is needed
by the RDMA devices in order to remap non-contiguous
QEMU virtual addresses to a contiguous virtual address range.
Moved the "share" flag to the Host Memory base class,
modified phys_mem_alloc to include the new parameter
and a new interface memory_region_init_ram_shared_nomigrate.
There are no functional changes if the new flag is not used.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
-----BEGIN PGP SIGNATURE-----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=DMbf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2018-02-07-v4' into staging
Miscellaneous patches for 2018-02-07
# gpg: Signature made Fri 09 Feb 2018 12:52:51 GMT
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-misc-2018-02-07-v4:
Move include qemu/option.h from qemu-common.h to actual users
Drop superfluous includes of qapi/qmp/qjson.h
Drop superfluous includes of qapi/qmp/dispatch.h
Include qapi/qmp/qnull.h exactly where needed
Include qapi/qmp/qnum.h exactly where needed
Include qapi/qmp/qbool.h exactly where needed
Include qapi/qmp/qstring.h exactly where needed
Include qapi/qmp/qdict.h exactly where needed
Include qapi/qmp/qlist.h exactly where needed
Include qapi/qmp/qobject.h exactly where needed
qdict qlist: Make most helper macros functions
Eliminate qapi/qmp/types.h
Typedef the subtypes of QObject in qemu/typedefs.h, too
Include qmp-commands.h exactly where needed
Drop superfluous includes of qapi/qmp/qerror.h
Include qapi/error.h exactly where needed
Drop superfluous includes of qapi-types.h and test-qapi-types.h
Clean up includes
Use #include "..." for our own headers, <...> for others
vnc: use stubs for CONFIG_VNC=n dummy functions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-19-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-15-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
For now, the kernel does not properly indicate configured CPU subfunctions
to the guest, but simply uses the host values (as support in KVM is still
missing). That's why we missed to model the PTFF subfunctions that come
with Multiple-epoch facility.
Let's properly add these, along with a new feature group.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180205102935.14736-1-david@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
AEN and AIS can be provided unconditionally, ZPCI should be turned on
manually.
With -cpu qemu,zpci=on, the guest kernel can now successfully detect
virtio-pci devices under tcg.
Also fixup the order of the MSA_EXT_{3,4} flags while at it.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
On s390x, pci support is implemented via a set of instructions
(no mmio). Unfortunately, none of them are documented in the
PoP; the code is based upon the existing implementation for KVM
and the Linux zpci driver.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This avoids tons of conversions when handling interrupts.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-19-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This avoids tons of conversions when handling interrupts.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Current STSI implementation is a mess, so let's rewrite it.
Problems fixed by this patch:
1) The order of exceptions/when recognized is wrong.
2) We have to store to virtual address space, not absolute.
3) Alignment check of the block is missing.
3) The SMP information is not indicated.
While at it:
a) Make the code look nicer
- get rid of nesting levels
- use struct initialization instead of initializing to zero
- rename a misspelled field and rename function code defines
- use a union and have only one write statement
- use cpu_to_beX()
b) Indicate the VM name/extended name + UUID just like KVM does
c) Indicate that all LPAR CPUs we fake are dedicated
d) Add a comment why we fake being a KVM guest
e) Give our guest as default the name "TCGguest"
f) Fake the same CPU information we have in our Guest for all layers
While at it, get rid of "potential_page_fault()" by forwarding the
retaddr properly.
The result is best verified by looking at "/proc/sysinfo" in the guest
when specifying on the qemu command line
-uuid "74738ff5-5367-5958-9aee-98fffdcd1876" \
-name "extra long guest name"
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
All blocks are 4k in size, which is only true for two of them right now.
Also some reserved fields were wrong, fix it and convert all reserved
fields to u8.
This also fixes the LPAR part output in /proc/sysinfo under TCG. (for
now, everything was indicated as 0)
While at it, introduce typedefs for these structs and use them in TCG/KVM
code.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Kicking all CPUs on every floating interrupt is far from efficient.
Let's optimize it at least a little bit.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-12-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Use s390_cpu_virt_mem_write() so we can actually revert what we did
(re-inject the dequeued IO interrupt).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Move floating interrupt handling into the flic. Floating interrupts
will now be considered by all CPUs, not just CPU #0. While at it, convert
I/O interrupts to use a list and make sure we properly consider I/O
sub-classes in s390_cpu_has_io_int().
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is a preparation for floating interrupt support and only applies to
MTTCG, single threaded TCG works just fine. If a floating interrupt wakes
up a VCPU and the CPU thinks it can run (clearing cs->halted), at
the point where the interrupt would be delivered, already another VCPU
might have picked up the interrupt, resulting in a wakeup without an
interrupt (executing wrong code).
It is wrong to let the VCPU continue to execute (the WAIT PSW). Instead,
we have to put the VCPU back to sleep.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let the flic device handle it internally. This will allow us to later
on store floating interrupts in the flic for the TCG case.
This now also simplifies kvm.c. All that's left is the fallback
interface for floating interrupts, which is now triggered directly via
the flic in case anything goes wrong.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We currently only support CRW machine checks. This is a preparation for
real floating interrupt support.
Get rid of the queue and handle it via the bit INTERRUPT_MCHK. We don't
rename it for now, as it will be soon gone (when moving crw machine checks
into the flic).
Please note that this is the same way also KVM handles it: only one
instance of a machine check can be pending at a time. So no need for a
queue.
While at it, make sure we try to deliver only if env->cregs[14]
actually indicates that CRWs are accepted.
Drop two unused defines on the way (we already have PSW_MASK_...).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We have to consider all deliverable interrupts.
We now have to take care of the special scenario, where we first
inject an interrupt with a WAIT PSW, followed by a !WAIT PSW. (very
unlikely but possible)
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
System headers should be included with <...>, our own headers with
"...". Offenders tracked down with an ugly, brittle and probably
buggy Perl script. Previous iteration was commit a9c94277f0.
Delete inclusions of "string.h" and "strings.h" instead of fixing them
to <string.h> and <strings.h>, because we always include these via
osdep.h.
Put the cleaned up system header includes first.
While there, separate #include from file comment with exactly one
blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-2-armbru@redhat.com>
The MC68040 MMU provides the size of the access that
triggers the page fault.
This size is set in the Special Status Word which
is written in the stack frame of the access fault
exception.
So we need the size in m68k_cpu_unassigned_access() and
m68k_cpu_handle_mmu_fault().
To be able to do that, this patch modifies the prototype of
handle_mmu_fault handler, tlb_fill() and probe_write().
do_unassigned_access() already includes a size parameter.
This patch also updates handle_mmu_fault handlers and
tlb_fill() of all targets (only parameter, no code change).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
stfle.81 (ppa15) is a transparent facility that can be passed to the
guest without the need to implement hypervisor support. As this feature
can be provided by firmware we add it to all full models.
Cc: qemu-stable@nongnu.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180118085628.40798-4-borntraeger@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We need to handle the bpb control on reset and migration. Normally
stfle.82 is transparent (and the normal guest part works without
hypervisor activity). To prevent any issues we require full
host kernel support for this feature.
Cc: qemu-stable@nongnu.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180118085628.40798-3-borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[CH: 'Branch Prediction Blocking' -> 'Branch prediction blocking']
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
CC == 2 can only happen due to a protection exception, not if memory is
not available (PGM_ADDRESSING). So all PGM_ADDRESSING exceptions have to
be forwarded to the guest.
Since the initial definition of TEST PROTECTION, we now read globals
(e.g. PSW mask), so we have to correctly mark the instruction
(otherwise, e.g. booting fedora 27 fails).
Also, the architecture explicitly specifies which exceptions are
forwarded to the guest, this makes the code a little nicer.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180112125452.8569-1-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Linux uses TEST PROTECTION to sense for available memory locations.
Let's implement what we can for now (just as for the other instructions,
excluding AR mode and special protection mechanisms).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171218224616.21030-2-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The point of writing a macro embedded in a 'do { ... } while (0)'
loop (particularly if the macro has multiple statements or would
otherwise end with an 'if' statement) is so that the macro can be
used as a drop-in statement with the caller supplying the
trailing ';'. Although our coding style frowns on brace-less 'if':
if (cond)
statement;
else
something else;
that is the classic case where failure to use do/while(0) wrapping
would cause the 'else' to pair with any embedded 'if' in the macro
rather than the intended outer 'if'. But conversely, if the macro
includes an embedded ';', then the same brace-less coding style
would now have two statements, making the 'else' a syntax error
rather than pairing with the outer 'if'. Thus, even though our
coding style with required braces is not impacted, ending a macro
with ';' makes our code harder to port to projects that use
brace-less styles.
The change should have no semantic impact. I was not able to
fully compile-test all of the changes (as some of them are
examples of the ugly bit-rotting debug print statements that are
completely elided by default, and I didn't want to recompile
with the necessary -D witnesses - cleaning those up is left as a
bite-sized task for another day); I did, however, audit that for
all files touched, all callers of the changed macros DID supply
a trailing ';' at the callsite, and did not appear to be used
as part of a brace-less conditional.
Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171201232433.25193-7-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are now trivial sets and tests against NULL. Unwrap.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We are good enough to boot upstream Linux kernels / Fedora 26/27. That
should be sufficient for now.
As the QEMU CPU model is migration safe, let's add compatibility code.
Generate the feature list to reduce the chance of messing things up in the
future.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208165529.14124-1-david@redhat.com>
[CH: squashed 's390x/cpumodel: make qemu cpu model play with "none" machine'
(20171213132407.5227-1-david@redhat.com) and 's390x/tcg: don't include z13
features in the qemu model' (20171213171512.17601-1-david@redhat.com) into
patch]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The Set-Program-Parameter facility (also known as Load-Program-Parameter
facility) provides the LPP instruction used to load the program
parameter. We already implement that instruction in TCG, so add it to our
list.
Note: Not documented in the PoP but in "The Load-Program-Parameter and
CPU-Measurement Facilities) - SA23-2260-05 document.
While at it, make the whole list ordered (according to cpu_features_def.h).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It only provides the EXTRACT CPU TIME instruction. We can reuse the stpt
helper, which calculates the CPU timer value.
As the instruction is not privileged, but we don't have a CPU timer
value in case of linux user, we simply reuse cpu_get_host_ticks() to
produce some descending value.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
KVM suppresses SIGA, setting cc=3. Let's do the same for TCG, so we're at
least equal.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-12-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Just like KVM does, we should suppress this instruction:
When this instruction is not provided, it is
checked for privileged operation exception and the
instruction is suppressed by the machine
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's just wire it up like KVM.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's handle it just like KVM:
Depending on the model, this instruction may not be
provided. When this instruction is not provided, it is
checked for operand exception and privileged-opera-
tion exception, and then is suppressed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With this facility, OI/OIY, NI/NIY and XI/XIY are atomic. All operate on
one byte (MO_UB). Emulate old behavior.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The semantics of ASI/ASGI/ALSI/ALSGI changed. Let's implement them just
like LOAD AND ADD, so they are atomic. Emulate old behavior.
This fixes random crashes when booting a Linux kernel compiled for
z196+ with SMP + MTTCG.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We were not yet using the value of the TOD Programmable Register.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Needed for machine check handling inside Linux (when restoring registers).
Except for SIGP and machine checks, we don't make use of the register
yet. Sufficient for now.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-4-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The architecture mode indication wasn't stored. The split of certain
64bit fields was unnecessary. Also, the complete clock comparator, not
just bit 0-55 (starting at byte 1) was stored.
We now generate a proper MCIC via the same helper we use for KVM.
There is more to clean up, but we will change the other parts later on
either way.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We'll need it later on in two places. Refactor it to just indicate the
validity bits. While at it, introduce a define for the used CR14 bit (we'll
also need later on).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-2-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Only one user left, get rid of it so we don't get any new users.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
All users are gone, we can finally drop it and make sure that all new
program interrupt injections are reminded of the retaddr - as they have to
use s390_program_interrupt() now.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
STSI needs some more love, but let's do one step at a time.
We can now drop potential_page_fault().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-15-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We can now drop updating the cc.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now we can drop the two save statements in the translate function.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-12-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now we can drop potential_page_fault(). While at it, move the
unlock further up, looks cleaner.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As we handle the retaddr in all cases properly now, we can drop it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390_cpu_virt_mem_rw() must always return, so callers can react on
an exception (e.g. see ioinst_handle_stcrw()).
Therefore, using program_interrupt() is wrong. Fix that up.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390_cpu_virt_mem_rw() must always return, so callers can react on
an exception (e.g. see ioinst_handle_stcrw()).
However, for TCG we always have to exit the cpu loop (and restore the
cpu state before that) if we injected a program interrupt. So let's
introduce and use s390_cpu_virt_mem_handle_exc() in code that is not
purely KVM.
Directly pass the retaddr we already have available in these functions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Needed to later drop potential_page_fault() from the diag TCG translate
function.
Convert program_interrupt() to s390_program_interrupt() directly, making
use of the passed address.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Once we wire up TCG, we will need the retaddr to correctly inject
program interrupts. As we want to get rid of the function
program_interrupt(), convert PCI code too.
For KVM, we can simply use RA_IGNORED.
Convert program_interrupt() to s390_program_interrupt() directly, making
use of the passed address.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
TCG needs the retaddr when injecting an interrupt. Let's just pass it
along and use RA_IGNORED for KVM. The value will be completely ignored for
KVM.
Convert program_interrupt() to s390_program_interrupt() directly, making
use of the passed address.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It is broken and not even wired up. We'll add a new handler soon, but
that will live somewhere else.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Allows to easily convert more callers of program_interrupt() and to
easily introduce new exceptions without forgetting about the cpu state
reset.
Use s390_program_interrupt() in places where we already had the same
pattern. We will later get rid of program_interrupt().
RA != 0 checks are already done behind the scenes.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It is not used anywhere.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
valgrind pointed out that we call KVM_S390_GET_IRQ_STATE with an
undefined value for flags. Kernels prior to 4.15 did not use that
field, and later kernels ignore it for compatibility reasons, but we
better play safe.
The same is true for SET_IRQ_STATE. We should make sure to not use the
flag field, either.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20171122142627.73170-2-borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Currently, multi threaded TCG with > 1 VCPU gets stuck during IPL, when
the bios tries to switch to the loaded kernel via DIAG 308.
As run_on_cpu() is used, we run into a deadlock after handling the reset.
We need the iolock (just like KVM).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171116170526.12643-4-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Looks like the last fix + cleanup introduced another bug. (for now Linux
guests don't seem to care) - we store the crs into ars.
Fixes: 947a38bd6f ("s390x/kvm: fix and cleanup storing CPU status")
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171116170526.12643-2-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We added the entry to insn-data.def, but failed to update op_risbg
to match. No need to special-case the imask inversion, since that
is already ~0 for RISBG (and now RISBGN).
Fixes: 375ee58bed
Fixes: https://bugs.launchpad.net/qemu/+bug/1701798 (s390x part)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20171107145546.767-1-richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Starting a guest with
<os>
<type arch='s390x' machine='s390-ccw-virtio-2.9'>hvm</type>
</os>
<cpu mode='host-model'/>
on an IBM z14 results in
"qemu-system-s390x: Some features requested in the CPU model are not
available in the configuration: gs"
This is because guarded storage is fenced for compat machines that did
not have guarded storage support. While this prevents future migration
abort (by not starting the guest at all), not being able to start a
"host-model" guest is very much unexpected. As it turns out, even if we
would modify libvirt to not expand the cpu model to contain "gs" for
compat machines, it cannot guarantee that a migration will succeed. For
example if the kernel changes its features (or the user has nested=1 on
one host but not on the other) the migration will fail nevertheless. So
instead of fencing "gs" for machines <= 2.9 lets allow it for all
machine types that support the CPU model. This will make "host-model"
runnable all the time, while relying on the CPU model to reject invalid
migration attempts. We also need to change the migration for guarded
storage.
Additional discussions about host-model are still pending but are out
of scope of this patch.
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <Cornelia Huck <cohuck@redhat.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
For now, e.g. host-s390-cpu wasn't exposed to the user. cpu-add, -cpu
and the CPU model qmp interfaces didn't care about the actual type,
as that information was hidden.
This changed with CPU hotplug via device_add. Now the type is visible to
the user. Before we get that supported in a stable version, this is our
last chance to change it.
So change it from "s390-cpu" to "s390x-cpu", to match the architecture
name. Example names are then e.g. z14-s390x-cpu or qemu-s390x-cpu.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171020115803.14093-1-david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Now that every target is using the disas_set_info hook,
the flags argument is unused. Remove it.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is identical for each target. So, move the initialization to
common code. Move the variable itself out of tcg_ctx and name it
cpu_env to minimize changes within targets.
This also means we can remove tcg_global_reg_new_{ptr,i32,i64},
since there are no longer global-register temps created by targets.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting multiple TCG contexts.
The core of this patch is this change to tcg/tcg.h:
> -extern TCGContext tcg_ctx;
> +extern TCGContext tcg_init_ctx;
> +extern TCGContext *tcg_ctx;
Note that for now we set *tcg_ctx to whatever TCGContext is passed
to tcg_context_init -- in this case &tcg_init_ctx.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Thereby decoupling the resulting translated code from the current state
of the system.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert all existing readers of tb->cflags to tb_cflags, so that we
use atomic_read and therefore avoid undefined behaviour in C11.
Note that the remaining setters/getters of the field are protected
by tb_lock, and therefore do not need conversion.
Luckily all readers access the field via 'tb->cflags' (so no foo.cflags,
bar->cflags in the code base), which makes the conversion easily
scriptable:
FILES=$(git grep 'tb->cflags' target include/exec/gen-icount.h \
accel/tcg/translator.c | cut -f1 -d':' | sort | uniq)
perl -pi -e 's/([^.>])tb->cflags/$1tb_cflags(tb)/g' $FILES
perl -pi -e 's/([a-z->.]*)(->|\.)tb->cflags/tb_cflags($1$2tb)/g' $FILES
Then manually fixed the few errors that checkpatch reported.
Compile-tested for all targets.
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move target cpu tcg initialization to common code,
called from cpu_exec_realizefn.
Acked-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a neat way to implement low address protection, whereby
only the first 512 bytes of the first two pages (each 4096 bytes) of
every address space are protected.
Store a tec of 0 for the access exception, this is what is defined by
Enhanced Suppression on Protection in case of a low address protection
(Bit 61 set to 0, rest undefined).
We have to make sure to to pass the access address, not the masked page
address into mmu_translate*().
Drop the check from testblock. So we can properly test this via
kvm-unit-tests.
This will check every access going through one of the MMUs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171016202358.3633-3-david@redhat.com>
[CH: restored error message for access register mode]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Simplify the error handling of the MSCH. Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-8-pasic@linux.vnet.ibm.com>
[CH: fix return code for fctl != 0]
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Simplify the error handling of the HSCH. Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-7-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Simplify the error handling of the CSCH. Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-6-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Simplify the error handling of the XSCH. Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-5-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Simplify the error handling of the SSCH and RSCH handler avoiding
arbitrary and cryptic error codes being used to tell how the instruction
is supposed to end. Let the code detecting the condition tell how it's
to be handled in a less ambiguous way. It's best to handle SSCH and RSCH
in one go as the emulation of the two shares a lot of code.
For passthrough this change isn't pure refactoring, but changes the way
kernel reported EFAULT is handled. After clarifying the kernel interface
we decided that EFAULT shall be mapped to unit exception. Same goes for
unexpected error codes and absence of required ORB flags.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-4-pasic@linux.vnet.ibm.com>
Tested-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
[CH: cosmetic changes]
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390-virtio-ccw.c is the sole user of s390x_new_cpu(),
so move this helper there.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1508253203-119237-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
object_new() returns cpu with refcnt == 1 and after realize
refcnt == 2*. s390x_new_cpu() as an owner of the first refcnt
should have released it on exit in both cases (on error and
success) to avoid it leaking. Do so for both cases.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1508247680-98800-2-git-send-email-imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When we try to start a CPU with a WAIT PSW, we have to take care that
TCG will actually try to continue executing instructions.
We must therefore really only unhalt the CPU if we don't have a WAIT
PSW. Also document the special order for restart interrupts, which
load a new PSW and change the state to operating.
To keep KVM working, simply don't have a look at the WAIT bit when
loading the PSW. Otherwise the behavior of a restart interrupt when
a CPU stopped would be changed.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-31-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Refactor it to use s390_get_feat_block(). Directly write into the mapped
lowcore with stfl and make sure it is really only compiled if needed.
While at it, add an alignment check for STFLE and avoid
potential_page_fault() by properly restoring the CPU state.
Due to s390_get_feat_block(), we will now also indicate the
"Configuration-z-architectural-mode", which is with new SIGP code the
right thing to do.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-30-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Nothing hindering us anymore from unlocking the restart code (used for
NMI).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-29-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As we properly implement it, allow to enable it.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-28-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This effectively enables experimental SMP support. Floating interrupts are
still a mess, so allow it but print a big warning. There also seems
to be a problem with CPU hotplug (after the main loop started).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-27-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[CH: changed insn-data.def as pointed out by Richard]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Thanks to Aurelien Jarno for doing this in his prototype.
We can flush the whole TLB as this should happen really rarely.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-26-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Implement them like KVM implements/handles them. Both can only be
triggered via SIGP instructions. RESET has (almost) the lowest priority if
the CPU is running, and the highest if the CPU is STOPPED. This is handled
in SIGP code already. On delivery, we only have to care about the
"CPU running" scenario.
STOP is defined to be delivered after all other interrupts have been
delivered. Therefore it has the actual lowest priority.
As both can wake up a CPU if sleeping, indicate them correctly to
external code (e.g. cpu_has_work()).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-25-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Mostly analogous to the kernel/KVM version (so I assume the checks are
correct :) ). As a preparation for TCG.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-24-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As preparation for TCG.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-23-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As preparation for TCG.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-22-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Add it as preparation for TCG. Sensing could later be done completely
lockless.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-21-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Preparation for TCG, for KVM is this is completely handled in the
kernel.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-20-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
For KVM, the KVM module decides when a STOP can be performed (when the
STOP interrupt can be processed). Factor it out so we can use it
later for TCG.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-19-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We want to use the same code base for TCG, so let's cleanly factor it
out.
The sigp mutex is currently not really needed, as everything is
protected by the iothread mutex. But this could change later, so leave
it in place and initialize it properly from common code.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Preparation for moving it out of kvm.c.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Called from SIGP code to be factored out, so let's move it. Add a
FIXME for TCG code in the future.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-15-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Factor it out into s390_store_status(), to be used also by TCG later on.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-14-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Preparation for factoring it out into !kvm code.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
No need to pass kvm_run. Pass parameters alphabetically ordered.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-12-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
KVM handles the wait PSW itself and triggers a WAIT ICPT in case it
really wants to sleep (disabled wait).
This will later allow us to change the order of loading a restart
interrupt and setting a CPU to OPERATING on SIGP RESTART without
changing KVM behavior.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-11-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If we encounter a WAIT PSW, we have to halt immediately. Using
cpu_loop_exit() at this point feels wrong. Simply leaving
cs->exception_index set doesn't result in an immediate stop.
This is also necessary to properly handle SIGP STOP interrupts later.
The CPU_INTERRUPT_HALT will be processed immediately and properly set
the CPU to halted (also resetting cs->exception_index to EXCP_HLT)
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-10-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This will now also detect crashes under TCG. We can directly use
cpu->env.psw.addr instead of kvm_run, as we do a cpu_synchronize_state().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Going to OPERATING here looks wrong. A CPU should even never be
!OPERATING at this point. Unhalting will already be done in
cpu_handle_halt() if there is work, so we can drop this statement
completely.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Interrupts can't wake such CPUs up. SIGP from other CPUs has to be used
to toggle the state.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We can now let go of INTERRUPT_EXT. When cr0 changes, we have to
revalidate if we now have a pending external interrupt, just like
when the PSW (or SYSTEM MASK only) changes.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-6-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Currently, enabling/disabling of interrupts is not really supported.
Let's improve interrupt handling code by explicitly checking for
deliverable interrupts only. This is the first step. Checking for
external interrupt subclasses will be done next.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-5-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Preparation for new TCG SIGP code. Especially also prepare for
indicating that another external call is already pending.
Take care of interrupt priority.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-4-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There are still some leftovers from old virtio interrupts in there.
Most importantly, we don't have to queue service interrupts anymore.
Just like KVM, we can simply multiplex the SCLP service interrupts and
avoid the queue.
Also, now only valid parameters/cpu_addr will be stored on service
interrupts.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-3-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
External interrupts are currently all handled like floating external
interrupts, they are queued. Let's prepare for a split of floating
and local interrupts by turning INTERRUPT_EXT into a mask.
While we can have various floating external interrupts of one kind, there
is usually only one (or a fixed number) of the local external interrupts.
So turn INTERRUPT_EXT into a mask and properly indicate the kind of
external interrupt. Floating interrupts will have to moved out of
one CPU instance later once we have SMP support.
The only floating external interrupts used right now are SERVICE
interrupts, so let's use that name. Following patches will clean up
SERVICE interrupt injection.
This get's rid of the ugly special handling for cpu timer and clock
comparator interrupts. And we really only store the parameters as
defined by the PoP.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It is unlikely that we will ever want to call this helper passing
an argument other than the current PC. So just remove the argument,
and use the pc we already get from cpu_get_tb_cpu_state.
This change paves the way to having a common "tb_lookup" function.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just as for external interrupts and I/O interrupts, we need to
initialize mchk_index during cpu reset.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Provides an interface for getting and setting the guest's extended
TOD-Clock via a single ioctl to kvm. If the ioctl fails because it
is not support by kvm, then we fall back to the old style of
retrieving the clock via two ioctls.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split failure change from epoch index change]
Message-Id: <20171004105751.24655-2-borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
[some cosmetic fixes]
Using virtual memory access is wrong and will soon include low-address
protection checks, which is to be bypassed for STFL.
STFL is a privileged instruction and using LowCore requires
!CONFIG_USER_ONLY, so add the ifdef and move the declaration to the
right place.
This was originally part of a bigger STFL(E) refactoring.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170927170027.8539-4-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Will be handy in the future.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928134609.16985-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
core_id is not needed by linux-user, as the core_id a.k.a. CPU address
is only accessible from kernel space.
Therefore, drop next_core_id and make cpu_index get autoassigned again
for linux-user.
While at it, shield core_id and cpuid completely from linux-user. cpuid
can also only be queried from kernel space.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928134609.16985-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Not that it would matter in the near future, but it is actually 2048
bytes, therefore 16384 possible bits.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928134609.16985-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's move it into the machine, so we trigger the IRQ after setting
ms->possible_cpus (which SCLP uses to construct the list of
online CPUs).
This also fixes a problem reported by Thomas Huth, whereby qemu can be
crashed using the none machine
qemu-s390x-softmmu -M none -monitor stdio
-> device_add qemu-s390-cpu
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928134609.16985-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We don't wrap addresses in the mmu for the _real case, therefore the
behavior should be unchanged.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170926183318.12995-7-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Low address protection checks will be moved into the mmu later.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170926183318.12995-6-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As we properly handle the return address now, we can drop
potential_page_fault().
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170926183318.12995-5-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Looks like, lurag was not loading 64bit but only 32bit.
As we properly handle the return address now, we can drop
potential_page_fault().
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170926183318.12995-4-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This makes it easy to access real addresses (prefix) and in addition
checks for valid memory addresses, which is missing when using e.g.
stl_phys().
We can later reuse it to implement low address protection checks (then
we might even decide to introduce yet another MMU for absolute
addresses, just for handling storage keys and low address protection).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170926183318.12995-3-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It should have been a >=, but let's directly perform a proper access
check to also be able to deal with hotplugged memory later.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170926183318.12995-2-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
env->psa is a 64bit value, while we copy 4 bytes into the save area,
resulting always in 0 getting stored.
Let's try to reduce such errors by using a proper structure. While at
it, use correct cpu->be conversion (and get_psw_mask()), as we will be
reusing this code for TCG soon.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170922140338.6068-1-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Define default CPU type in generic way in machine class_init
and let common machine code handle cpu_model parsing.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <1505998749-269631-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The STFLE bits for the MSA (extension) facilities simply indicate that
the respective instructions can be executed. The QUERY subfunction can then
be used to identify which features exactly are available.
Availability of subfunctions can also vary on real hardware. For now, we
simply implement a CPU model without any available subfunctions except
QUERY (which is always around).
As all MSA functions behave quite similarly, we can use one translation
handler for now. Prepare the code for implementation of actual subfunctions.
At least MSA is helpful for now, as older Linux kernels require this
facility when compiled for a z9 model. Allow to enable the facilities
for the qemu cpu model.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170920153016.3858-4-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We want to use it in another file.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170920153016.3858-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Missing and is used inside Linux in the context of CPACF.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170920153016.3858-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
-----BEGIN PGP SIGNATURE-----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=/+LV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170927a' into staging
Migration pull 2017-09-27
# gpg: Signature made Wed 27 Sep 2017 14:56:23 BST
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20170927a:
migration: Route more error paths
migration: Route errors up through vmstate_save
migration: wire vmstate_save_state errors up to vmstate_subsection_save
migration: Check field save returns
migration: check pre_save return in vmstate_save_state
migration: pre_save return int
migration: disable auto-converge during bulk block migration
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We disabled ais for 2.10, so let's also remove it from the z14
default model.
Fixes: 3f2d07b3b0 ("s390x/ais: for 2.10 stable: disable ais facility")
CC: qemu-stable@nongnu.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20170927072030.35737-2-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The migration interface for ais was introduced with kernel 4.13
but the capability itself had been active since 4.12. As migration
support is considered necessary lets disable ais in the 2.10
stable version. A proper fix and re-enablement will be done
for qemu 2.11.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20170921140834.14233-2-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
d32bd032d8 ("s390x/ccw: create s390 phb conditionally") made
registering the s390 pci host bridge conditional on presense
of the zpci facility bit. Sadly, that breaks migration from
machines that did not use the cpu model (2.7 and previous).
Create the s390 phb for pre-cpu model machines as well: We can
tweak s390_has_feat() to always indicate the zpci facility bit
when no cpu model is available (on 2.7 and previous compat machines).
Fixes: d32bd032d8 ("s390x/ccw: create s390 phb conditionally")
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
SCLP correctly indicates the core-id aka. CPU address for each available
CPU.
As the core-id corresponds to cpu_index, also a newly created kvm vcpu
gets assigned this core-id as vcpu id. So SIGP in the kernel works
correctly (it uses the vcpu id to lookup the correct CPU).
So there should be nothing hindering us from hotplugging CPUs in random
core-id order.
This now makes sure that the output from "query-hotpluggable-cpus"
is completely true. Until now, a specific order is implicit. Performance
vice, hotplugging CPUs in non-sequential order might not be the best thing
to do, as VCPU lookup inside KVM might be a little slower. But that
doesn't hinder us from supporting it.
next_core_id is now used by linux user only.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-23-david@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that there is only one user of cpu_s390x_create() left, make cpu
creation look like on x86.
- Perform the model/properties split and checks in s390_init_cpus()
- Parse features only once without having to remember if already parsed
- Pass only the typename to s390x_new_cpu()
- Use the typename of an existing CPU for hotplug via cpu-add
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-21-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
E.g. the following now works:
device_add host-s390-cpu,id=cpu1,core-id=1
The system will perform the same checks as when using cpu_add:
- If the core_id is already in use
- If the next sequential core_id isn't used
- If core-id >= max_cpu is specified
In addition, mixed CPU models are checked. E.g. if starting with
-cpu host and trying to hotplug "qemu-s390-cpu":
"Mixed CPU models are not supported on s390x."
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Other architectures provide nicely sorted lists, let's do it similarly on
s390x.
While at it, clean up the code we have to touch either way.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Adapt to the new term "core_id". While at it, fix the type and drop the
initialization to 0 (which is superfluous).
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-15-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Some time ago we discussed that using "id" as property name is not the
right thing to do, as it is a reserved property for other devices and
will not work with device_add.
Switch to the term "core-id" instead, and use it as an equivalent to
"CPU address" mentioned in the PoP. There is no such thing as cpu number,
so rename env.cpu_num to env.core_id. We use "core-id" as this is the
common term to use for device_add later on (x86 and ppc).
We can get rid of cpu->id now. Keep cpu_index and env->core_id in sync.
cpu_index was already implicitly used by e.g. cpu_exists(), so keeping
both in sync seems to be the right thing to do.
cpu_index will now no longer automatically get set via
cpu_exec_realizefn(). For now, we were lucky that both implicitly stayed
in sync.
Our new cpu property "core-id" can be a static property. Range checks can
be avoided by using the correct type and the "setting after realized"
check is done implicitly.
device_add will later need the reserved "id" property. Hotplugging a CPU
on s390x will then be: "device_add host-s390-cpu,id=cpu2,core-id=2".
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
scc->next_cpu_id is updated when realizing. Setting it just before that
point looks cleaner.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Clean it up by reusing program_interrupt(). Add a concern regarding
ilen.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This looks cleaner. linux-user will not use the ilen field, so setting
it doesn't do any harm.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Implemented in sclp.c, so let's move it to the right include file.
Also adjust some includes.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-9-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This allows us to drop inclusion of cpu_models.h in cpu-qom.h, and
prepares for using cpu-qom.h as a s390 specific version of typedefs.h
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-8-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Implemented in s390-virtio-ccw.c, so move it to the right header.
We can also drop the extern. Fix up one include.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Implemented in hw/s390x/s390-virtio-hcall.c, so let's move it to the
right header file.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
All but a handful of files include exec/cpu-all.h via cpu.h only.
As these files already include cpu.h, let's just drop the additional
include.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The guest uses the mpcifc instruction to register the aibvo of a zpci
device, which is the starting offset of indicators in the indicator
area and thus remains constant. Each msix vector is an offset from the
aibvo. When we map a msix route to an adapter route, we should not
modify the starting offset, but instead add the vector to the starting
offset to get the absolute offset in the specific route.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <1504606380-49341-3-git-send-email-zyimin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
PCIDevice pointer has been a parameter of kvm_arch_fixup_msi_route().
So we don't need to store zpci idx in msix message data to find out the
specific zpci device. Instead, we could use pci device id to find its
corresponding zpci device.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <1504606380-49341-2-git-send-email-zyimin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In a previous patch (3dc6f86936) we
converted uses of error_report("warning:"... to use warn_report()
instead. This was to help standardise on a single method of printing
warnings to the user.
There appears to have been some cases that slipped through in patch sets
applied around the same time, this patch catches the few remaining
cases.
All of the warnings were changed using this command:
find ./* -type f -exec sed -i \
's|error_report(".*warning[,:] |warn_report("|Ig' {} +
Indentation fixed up manually afterwards.
Two messages were manually fixed up as well.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <eec8cba0d5434bd828639e5e45f12182490ff47d.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Used later. An enum makes expected values explicit and
bounds the value space of switches.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <150002049746.22386.2316077281615710615.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
cpu_s390x_init() is used only *-user targets indirectly
via cpu_init() macro and has a hack to assign ids to created
cpus (I'm not sure if 'id' really matters to *-user emulation).
So to on safe side, instead of having custom wrapper to do numbering
replace it with cpu_generic_init() and use S390CPUClass::next_cpu_id
which could serve the same purpose as static variable and move cpu->id
initialization to s390_cpu_initfn for CONFIG_USER_ONLY use-case.
PS:
ifdef is ugly but it allows us to hide s390x detail that isn't
set by *-user targets and reuse generic cpu creation utility
for btoh machine and user emulation.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1504185578-80843-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's reshuffle the function prototypes so we get a cleaner outline
of the files.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-19-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's do it just like the other architectures. Introduce kvm-stub.c
for stubs and kvm_s390x.h for the declarations.
Change license to GPL2+ and keep copyright notice.
As we are dropping the sysemu/kvm.h include from cpu.h, fix up includes.
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-18-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's just introduce an helper.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Prepare to move more stuff (especially KVM related) from cpu.h to
internal.h.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
cpu.h should only contain what really has to be accessed outside of
target/s390x/. Add internal.h which can only be used inside target/s390x/.
Move everything that isn't fast enough to run away and restructure it
right away. We'll move all kvm_* stuff later.
Minor style fixes to avoid checkpatch warning to:
- struct Lowcore: "{" goes into same line as typedef
- struct LowCore: add spaces around "-" in array length calculations
- time2tod() and tod2time(): move "{" to separate line
- get_per_atmid(): add space between ")" and "?". Move cases by one char.
- get_per_atmid(): drop extra paremthesis around (1 << 6)
Change license of new file to GPL2+ and keep copyright notice.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-15-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Only used in that file.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Only used in that file. Also drop the comment, not really needed.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Only used in that file.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-12-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Only used in that file.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
While at it, move the translations into the function and properly pass
enum cc_op as parameter. We can't move it to cc_helper.c as this would
break --disable-tcg.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The functions are not used in target/s390x/ so a header in hw/s390x/
is a better place.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-9-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390-stattrib.c needs definition of TARGET_PAGE_SIZE, solve it via cpu.h.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now we can drop inclusion of "sysemu/kvm.h" from "s390-virtio.c".
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-7-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Not needed at that point. Also drop it from kvm_s390_query_mem_limit()
we call in kvm_s390_set_mem_limit().
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-3-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Not needed at that point.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-2-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If a guest running on a machine without zpci issues a pci instruction,
throw them an exception.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Only set the zpci feature bit on builds that actually support pci.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The nt2 event class is pci-only - don't look for events if pci is
not in the active cpu model.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
While the PoP is silent on the issue, z/VM documentation states
that unknown diagnose codes trigger a specification exception.
We already do that when running with kvm, so change tcg to do so
as well.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Found by Coverity (CID 1378273).
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The instruction is 4 bytes long.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170721125609.11117-2-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When initiating a program check interruption by calling program_interrupt
the instruction length (ilen) of the current instruction is supplied as
the third parameter.
On s390x all the IO instructions are of instruction format S and their
ilen is 4. The calls to program_interrupt (introduced by commits
7b18aad543 ("s390: Add channel I/O instructions.", 2013-01-24) and
61bf0dcb2e ("s390x/ioinst: Add missing alignment checks for IO
instructions", 2013-06-21)) however use ilen == 2.
This is probably due to a confusion between ilen which specifies the
instruction length in bytes and ILC which does the same but in halfwords.
If kvm_enabled() this does not actually matter, because the ilen
parameter of program_interrupt is effectively unused.
Let's provide the correct ilen to program_interrupt.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Fixes: 7b18aad543 ("s390: Add channel I/O instructions.")
Fixes: 61bf0dcb2e ("s390x/ioinst: Add missing alignment checks for IO instructions")
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170724143452.55534-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Adding some CONFIG_TCG tests to be finally able to compile QEMU
on s390x also without TCG.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1500886370-14572-6-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
These functions can not be compiled with --disable-tcg. But since we
need the other functions from helper.c in the non-tcg build, we can also
not simply remove helper.c from the non-tcg builds. Thus the problematic
functions have to be moved into a separate new file instead that we
can later omit in the non-tcg builds.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1500886370-14572-5-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
misc_helper.c won't be compiled with --disable-tcg anymore, but we
still need the program_interrupt() function in that case. Move it
to interrupt.c instead, and refactor it to re-use the code from
trigger_pgm_exception() (for TCG) and enter_pgmcheck() (for KVM,
which now got renamed to kvm_s390_program_interrupt() for
clarity).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1500886370-14572-4-git-send-email-thuth@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
misc_helper.c won't be compiled with --disable-tcg anymore, but we
still need the diag helpers in KVM builds, too, so move the helper
functions to a separate file.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1500886370-14572-3-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
translate.c can not be compiled with --disable-tcg, but we need
the s390_cpu_dump_state() in KVM-only builds, too. So let's move
that function to helper.c instead, which will also be compiled
when --disable-tcg has been specified.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1500886370-14572-2-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There are certain features that we put into base models, but that are
not relevant for the actual search. The most famous example are
MSA subfunctions that might be disabled on certain real hardware out
there.
While the kvm host model detection will usually detect the correct model
on such machines (as it will in the common case not pass features to check
for into s390_find_cpu_def()), baselining will fall back to a quite old
model just because some MSA subfunctions are missing.
Let's improve that by ignoring lack of these features while performing
the search for a base model.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170720123721.12366-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Using ordinary bitmap operations to set/test bits does not work properly
on architectures !s390x. Let's drop (test|set)_bit_inv and introduce
(test|set)_be_bit instead. These functions work on uint8_t array, not on
unsigned longs arrays and are for now only used in the context of
CPU features.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170720123721.12366-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We'll have to do the same for TCG, so let's just move it in there.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170720123721.12366-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Unused and broken, let's just get rid of it.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170720123721.12366-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The SIE_KSS feature will allow a guest to use KSS for a nested guest.
To create a nested guest the SIE_F2 facility is still necessary.
Since SIE_F2 is not part of the default model it does not make
a lot of sense to provide the SIE_KSS feature in the default model.
Let's also create a dependency check.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Message-Id: <1500550051-7821-2-git-send-email-borntraeger@de.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Needed to implement a target-agnostic gen_intermediate_code()
in the future.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002025498.22386.18051908483085660588.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
- add a CPU model for the IBM z14 which was announced on July 17th 2017
- update linux headers to 4.13-rc0 to get a fix for an ioctl definition
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iQIcBAABAgAGBQJZbc04AAoJEBF7vIC1phx8xxkP/Rf/Y7jCvFzDXvE2+tJwkETi
9l6un+gyoW64l4vI7RDT7wTl/A7uBNxZxJMXprFKaE2Kcg3D8IWdFq/RudmuJCJ5
SzY4X/L1kWHdKxVzeEF6RVqKfeNnA2Hk4KggzDMqpXxztjenvJiJYHqL0n3+edLS
LHfi4z5PMzXHMF9plE7Usw0GMp+8HzVe3Bk/d+gqBMG9TDTPJXdGP/E9FEDij4dE
GcNNmilzowkz9JZh5Gw92oq7iLXoCMbf9QUiu5IF1Gqd/kw9tFYzWtq26nR8GJyf
sr7DeNbUiOi6xJA/CWTwwlwS3FZXXNjbQPumRfP1kRllyHKyRIAHxhKVJajTDgQg
FVZ46GAWuUnK38COhkuNN67zoH8YzRgHwn/Ls6RxTtGlJe1xlg2GgNJSxavWh6FE
Hwr1twe13A/QyFN7dVyy52F/WYIPxggwUqEE7Xh5YL3eDIaPuC/2bKS5pTZmGrJZ
47S+FwBGPvkt2+DmpynCShN1APpLLH+Ap448twYkEbOqoYMD8zoqZj2LPtZA13Rp
htb56v0bRgTFrLQcIpUn+QeIsIgAde/FQl6PvbQujVJlwUG8mYCiin/4brVXRRFr
JCEKjSf7qEDEnK2SAefdIlrpeQT9kBuHpWW8/pLhEuJMQpTk2qwUwOlN4AKaJb0T
acsUZwXSl4hGR3L7k/VL
=jOvs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170718' into staging
s390: add z14 cpu model
- add a CPU model for the IBM z14 which was announced on July 17th 2017
- update linux headers to 4.13-rc0 to get a fix for an ioctl definition
# gpg: Signature made Tue 18 Jul 2017 09:56:24 BST
# gpg: using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C
* remotes/borntraeger/tags/s390x-20170718:
s390x/cpumodel: z14 cpu models
linux header sync against v4.13-rc1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch introduces the CPU model for z14, along with all base and
optional features.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The rotation is to the left, but extract shifts to the right.
The computation of the extract parameters needs adjusting.
For the entry condition, simplify
64 - rot + len <= 64
-rot + len <= 0
len <= rot
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reported-by: David Hildenbrand <david@redhat.com>
Suggested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
STFL bit 4 and 5 are just indications to the guest, which TLB entries an
IDTE call will clear. These are performance indicators for the guest.
STFL bit 4:
INVALIDATE DAT TABLE ENTRY (IDTE) performs
the invalidation-and-clearing operation by
selectively clearing TLB segment-table entries
when a segment-table entry or entries are
invalidated. IDTE also performs the clearing-by-
ASCE operation. Unless bit 4 is one, IDTE simply
purges all TLBs. Bit 3 is one if bit 4 is one.
We can simply set STFL bit 4 ("idtes") and still purge the complete TLB.
Purging more than advertised is never bad. E.g. Linux doesn't even care
about this bit. We can optimized this later.
This is helpful, as the z9 base model contains this facility.
STFL bit 5 (clearing TLB region-table-entries) was never implemented on
real HW, therefore we can simply ignore it for now.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170627161032.5014-1-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Drop TRT from the set of insns handled internally by EXECUTE.
It's more important to adjust the existing helper to handle
both TRT and TRTR.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Since we require all registers saved on input, read R0 from ENV instead
of passing it manually. Recognize the specification exception when R0
contains incorrect data. Keep high bits of result registers unmodified
when in 31 or 24-bit mode.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=2bOV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170714' into staging
s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups
- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support
# gpg: Signature made Fri 14 Jul 2017 11:33:04 BST
# gpg: using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C
* remotes/borntraeger/tags/s390x-20170714: (40 commits)
s390x/gdb: add gs registers
s390x/arch_dump: also dump guarded storage control block
s390x/kvm: enable guarded storage
s390x/kvm: Enable KSS facility for nested virtualization
s390x/cpumodel: add esop/esop2 to z12 model
s390x/cpumodel: we are always in zarchitecture mode
s390x/cpumodel: wire up new hardware features
s390x/flic: migrate ais states
s390x/cpumodel: add zpci, aen and ais facilities
s390x: initialize cpu firstly
pc-bios/s390: rebuild s390-ccw.img
pc-bios/s390: add s390-netboot.img
pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load
pc-bios/s390-ccw: Add virtio-net driver code
pc-bios/s390-ccw: Add core files for the network bootloading program
roms/SLOF: Update submodule to latest status
pc-bios/s390-ccw: Add code for virtio feature negotiation
pc-bios/s390-ccw: Remove unused structs from virtio.h
pc-bios/s390-ccw: Move byteswap functions to a separate header
pc-bios/s390-ccw: Add a write() function for stdio
...
Conflicts:
target/s390x/kvm.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce guarded storage support for KVM guests on s390.
We need to enable the capability, extend machine check validity,
sigp store-additional-status-at-address, and migration.
The feature is fenced for older machine type versions.
Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If the host supports keyless subset (KSS) then first level
guest (G2) should enable KSS facility as well.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add esop and esop2 features to z12 model where esop2 was originally
introduced. Disable esop and esop2 when using compatibility machine
v2.9 or earlier.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In QEMU, a guest VCPU always started in and never was able to leave
z/Architecture mode. Now we have an architected way of showing this
condition.
The SIGP SET ARCHITECTURE instruction is simply rejected. Linux as guest
seems to not care about the return value, which is a good thing
The new handling is just like already being in z/Architecture mode.
We'll not try to fake absence of this facility, but still not indicate
the facility in case some strange CPU model turned z/Architecture off
completely (which doesn't work either way but let's us see how a
guest would react on a lack of this facility).
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Some new guest features have been introduced recently. Let's wire
them up in the CPU model.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split patch]
zPCI instructions and facilities are available since IBM zEnterprise
EC12. To support z/PCI in QEMU we enable zpci, aen and ais facilities
starting with zEC12 GA1. And we always set zpci and aen bits in max cpu
model. Later they might be switched off due to applied real cpu model.
For ais bit, we only provide it in the full cpu model beginning with
zEC12 and defer its enablement in the default cpu model to a later point
in time. At the same time, disable them for 2.9 and older machines.
Because of introducing AIS facility, we could check if it's enabled to
initialize flic->ais_supported with the real value.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Currently, we do nothing for the SIC instruction, but we need to
implement it properly. Let's add proper handling in the backend code.
Co-authored-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Provide a mechanism to disable features in compatibility machines.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Clean up spacing and add comments to clarify difference between base, full and
default models.
Not having spacing around the model definitions in gen-features.c is
particularly frustrating as the reader tends to misinterpret which model they
are looking at or editing.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's keep track of cmma enablement and move the mem_path check into
the actual enablement. This now also warns users that do not use
cpu-models about disabled cmma when using huge pages.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Convert all uses of error_report("warning:"... to use warn_report()
instead. This helps standardise on a single method of printing warnings
to the user.
All of the warnings were changed using these two commands:
find ./* -type f -exec sed -i \
's|error_report(".*warning[,:] |warn_report("|Ig' {} +
Indentation fixed up manually afterwards.
The test-qdev-global-props test case was manually updated to ensure that
this patch passes make check (as the test cases are case sensitive).
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Lieven <pl@kamp.de>
Cc: Josh Durgin <jdurgin@redhat.com>
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Max Reitz <mreitz@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch is based on a similar patch from Stefan Hajnoczi -
commit c324fd0a39 ("virtio-pci: use ioeventfd even when KVM is disabled")
Do not check kvm_eventfds_enabled() when KVM is disabled since it
always returns 0. Since commit 8c56c1a592
("memory: emulate ioeventfd") it has been possible to use ioeventfds in
qtest or TCG mode.
This patch makes -device virtio-scsi-ccw,iothread=iothread0 work even
when KVM is disabled.
Currently we don't have an equivalent to "memory: emulate ioeventfd"
for ccw yet, but that this doesn't hurt and qemu-iotests 068 can pass with
skipping iothread arguments.
I have tested that virtio-scsi-ccw works under tcg both with and without
iothread.
This patch fixes qemu-iotests 068, which was accidentally merged early
despite the dependency on ioeventfd.
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20170704132350.11874-2-haoqf@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The response for query-cpu-definitions didn't include the
unavailable-features field, which is used by libvirt to figure
out whether a certain cpu model is usable on the host.
The unavailable features are now computed by obtaining the host CPU
model and comparing it against the known CPU models. The comparison
takes into account the generation, the GA level and the feature
bitmaps. In the case of a CPU generation/GA level mismatch
a feature called "type" is reported to be missing.
As a result, the output of virsh domcapabilities would change
from something like
...
<mode name='custom' supported='yes'>
<model usable='unknown'>z10EC-base</model>
<model usable='unknown'>z9EC-base</model>
<model usable='unknown'>z196.2-base</model>
<model usable='unknown'>z900-base</model>
<model usable='unknown'>z990</model>
...
to
...
<mode name='custom' supported='yes'>
<model usable='yes'>z10EC-base</model>
<model usable='yes'>z9EC-base</model>
<model usable='no'>z196.2-base</model>
<model usable='yes'>z900-base</model>
<model usable='yes'>z990</model>
...
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Message-Id: <1499082529-16970-1-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's keep it very simple for now and flush the complete tlb,
we currently can't find the right entries in our tlb, we would have
to store the used tables for each element.
As we now fully implement the DAT-enhancement facility, we can allow to
enable it for the qemu CPU model.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170622094151.28633-4-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
If only the page index is set, most likely we don't have a valid
virtual address. Let's do a full tlb flush for that case.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170622094151.28633-3-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Let's allow to enable it for the qemu cpu model and correctly emulate
it.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170622094151.28633-2-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Most of the PSW bits that were being copied into TB->flags
are not relevant to translation. Removing those that are
unnecessary reduces the amount of translation required.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Missed the proper alignment in TRTO/TRTT, and ignoring the M3
field for all TRXX insns without ETF2-ENH.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This facility bit includes execution-hint, load-and-trap,
miscellaneous-instruction-extensions and processor-assist.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This facility bit includes load-on-condition-2 and
load-and-zero-rightmost-byte.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This facility bit includes DFP-rounding, FPR-GR-transfer,
FPS-sign-handling, and IEEE-exception-simulation. We do
support all of these.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This adds support for the MOVE WITH OPTIONAL SPECIFICATIONS (MVCOS)
instruction. Allow to enable it for the qemu cpu model using
qemu-system-s390x ... -cpu qemu,mvcos=on ...
This allows to boot linux kernel that uses it for uacccess.
We are missing (as for most other part) low address protection checks,
PSW key / storage key checks and support for AR-mode.
We fake an ADDRESSING exception when called from problem state (which
seems to rely on PSW key checks to be in place) and if AR-mode is used.
user mode will always see a PRIVILEDGED exception.
This patch is based on an original patch by Miroslav Benes (thanks!).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170614133819.18480-3-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Such shifts are usually used to easily extract the PSW KEY from the PSW
mask, so let's avoid the confusing offset of 4.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170614133819.18480-2-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The FAC_ names were placeholders prior to the introduction
of the current facility modeling.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Exit to cpu loop so we reevaluate cpu_s390x_hw_interrupts.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Let's properly expose the CPU type (machine-type number) via "STORE CPU
ID" and "STORE SUBSYSTEM INFORMATION".
As TCG emulates basic mode, the CPU identification number has the format
"Annnnn", whereby A is the CPU address, and n are parts of the CPU serial
number (0 for us for now).
A specification exception will be injected if the address is not aligned
to a double word. Low address protection will not be checked as
we're missing some more general support for that.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170609133426.11447-3-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can tell from the program interrupt code, whether a program interrupt
has to forward the address in the PGM new PSW
(suppressing/terminated/completed) to point at the next instruction, or
if it is nullifying and the PSW address does not have to be incremented.
So let's not modify the PSW address outside of the injection path and
handle this internally. We just have to handle instruction length
auto detection if no valid instruction length can be provided.
This should fix various program interrupt injection paths, where the
PSW was not properly forwarded.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170609142156.18767-3-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170609142156.18767-2-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We have to make the address in the old PSW point at the next
instruction, as addressing exceptions are suppressing and not
nullifying.
I assume that there are a lot of other broken cases (as most instructions
we care about are suppressing) - all trigger_pgm_exception() specifying
and explicit number or ILEN_LATER look suspicious, however this is another
story that might require bigger changes (and I have to understand when
the address might already have been incremented first).
This is needed to make an upcoming kvm-unit-test work.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170529121228.2789-1-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The CDSG instruction requires a 16-byte alignement, as expressed in
the MO_ALIGN_16 passed to helper_atomic_cmpxchgo_be_mmu. In the non
parallel case, use check_alignment to enforce this.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170604202034.16615-4-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
