Too many VM kittens were killed since 7d03f82f81. Another one just died
under my fat fingers.
When you quit a kgdb session, does the Linux kernel power off? Or when
you terminate gdb attached to a hardware debugger, does your board
vanish in space? No.
So let's stop terminating QEMU when the gdbstub receives a kill commando
in system emulation mode. Real termination can still be achieved via
"monitor quit". We keep the behavior for user mode emulation which is
arguably more like a gdbserver scenario.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix a leak of a file descriptor in error exit paths in
gdbserver_open().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
accidently->accidentally
annother->another
choosen->chosen
consideres->considers
decriptor->descriptor
developement->development
paramter->parameter
preceed->precede
preceeding->preceding
priviledge->privilege
propogation->propagation
substraction->subtraction
throught->through
upto->up to
usefull->useful
Fix also grammar in posix-aio-compat.c
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
cppcheck report:
gdbstub.c:1781: error: Memory leak: s
Rearranging of the code avoids the leak.
v2:
Replace the g_malloc0() by g_new0() (suggested by Stuart Brady).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This allows a more efficient representation for 64-bit hosts.
It should be about the same for 32-bit hosts, as we can still
access the individual pieces of the double.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Next commit will convert the query-status command to use the
RunState type as generated by the QAPI.
In order to "transparently" replace the current enum by the QAPI
one, we have to make some changes to some enum values.
As the changes are simple renames, I'll do them in one shot. The
changes are:
- Rename the prefix from RSTATE_ to RUN_STATE_
- RUN_STATE_SAVEVM to RUN_STATE_SAVE_VM
- RUN_STATE_IN_MIGRATE to RUN_STATE_INMIGRATE
- RUN_STATE_PANICKED to RUN_STATE_INTERNAL_ERROR
- RUN_STATE_POST_MIGRATE to RUN_STATE_POSTMIGRATE
- RUN_STATE_PRE_LAUNCH to RUN_STATE_PRELAUNCH
- RUN_STATE_PRE_MIGRATE to RUN_STATE_PREMIGRATE
- RUN_STATE_RESTORE to RUN_STATE_RESTORE_VM
- RUN_STATE_PRE_MIGRATE to RUN_STATE_FINISH_MIGRATE
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Today, when notifying a VM state change with vm_state_notify(),
we pass a VMSTOP macro as the 'reason' argument. This is not ideal
because the VMSTOP macros tell why qemu stopped and not exactly
what the current VM state is.
One example to demonstrate this problem is that vm_start() calls
vm_state_notify() with reason=0, which turns out to be VMSTOP_USER.
This commit fixes that by replacing the VMSTOP macros with a proper
state type called RunState.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Gdb expects all registers windows to be flushed in ram, which is not the case
in Qemu. Therefore the back-trace generation doesn't work. This patch adds a
function to handle reads (and only read) in stack frames as if windows were
flushed.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Specific xtensa processor overlay for GDB contains register map in
the gdb/xtensa-config.c. This description is used by the GDB to e.g.
parse 'g' response packets and it may be reused in the qemu's gdbstub
(only XTREG definitions for non-pseudoregisters are needed).
Currently mainline GDB does not support operations with privileged SRs
(see http://sourceware.org/ml/gdb/2011-07/msg00075.html). This support
may be enabled, see NUM_CORE_REGS comment in the gdbstub.c
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Avoid warnings like these by wrapping recv():
CC slirp/ip_icmp.o
/src/qemu/slirp/ip_icmp.c: In function 'icmp_receive':
/src/qemu/slirp/ip_icmp.c:418:5: error: passing argument 2 of 'recv' from incompatible pointer type [-Werror]
/usr/local/lib/gcc/i686-mingw32msvc/4.6.0/../../../../i686-mingw32msvc/include/winsock2.h:547:32: note: expected 'char *' but argument is of type 'struct icmp *'
Remove also casts used to avoid warnings.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
target-mips has been switched to softfloat only long ago, but
a #ifndef CONFIG_SOFTFLOAT has been forgotten. Remove it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We have successfully lazilized cc computation, so we need to manually
trigger its calculation when gdb wants to fetch it. We also changed the
variable name, so writing it writes into a different field now.
Signed-off-by: Alexander Graf <agraf@suse.de>
When the VM goes into stop state while there is a gdb frontend attached,
it makes sense to inform gdb about this fact and at least a bit about
the stop reason. Basically, all stops are interesting except for the
temporary VMSTOP_SAVE/LOADVM.
The patch maps the relevant VMSTOP reasons on unique and more or less
associatable signals that gdb understands.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch adds lm32 support to the gdbstub.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Define and use dedicated constants for vm_stop reasons, they actually
have nothing to do with the EXCP_* defines used so far. At this chance,
specify more detailed reasons so that VM state change handlers can
evaluate them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
On Windows, this is required to flush the remaining data in the IO stream,
otherwise Gdb do not receive the last packet.
Version 2:
Fix linux-user build error.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
If the compiler supports the warning flag -Wnested-externs, use it.
Avoid the only warning by moving the declaration of xml_builtin to a
more proper place.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Recalculate Sparc64 CPU flags on interrupts, otherwise some earlier
flags could be stored to pstate.
Refactor PSR/CCR/CWP handling: concentrate the actual
functions to op_helper.c.
Thanks to Igor Kovalenko for reporting.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
With this patch, 'gdb detach' correctly resumes the inferior execution
after detaching the debugger.
The bug was caused by qemu asking gdb to execute a syscall (isatty)
after the detach, and then waiting (forever) for the reply. I fixed this
by properly setting gdb_syscall_mode appropriately in the 'detach'
packet handling, so subsequent syscalls are solved by qemu rather than gdb.
Signed-off-by: Daniel Gutson <dgutson@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
cpu_gdb_read/write_register need to access the fpcr via the
cpu_alpha_load/store_fpcr functions.
The unique register is number 66 in the gdb remote protocol.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Attached is a patch to fix a typo in 'P' packet processing for M68K.
Without this patch, QEMU fails to honor GDB's P packets from GDB
(writing to registers) for the address registers (A0 - A7).
The problem is because of an obvious typo. Notice that the second
"if" condition is meant to be n < 16 in:
if (n < 8) {
:
} else if (n < 8) {
Signed-off-by: Kazu Hirata <kazu@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The only thing to do here is to expose the current processor mode to GDB
and to set the processor mode properly when we change the PC.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In order to debug funny kernel breakages it's always good to have a working
gdb stub around.
While Uli's patches don't include one one, I needed one that's at least good
enough for 'bt' and some variable examinations during early bootup.
So here it is - the absolute basics to get the qemu gdb stub running with s390x
targets.
Sgined-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We're leaking file descriptors to child processes. Set FD_CLOEXEC on file
descriptors that don't need to be passed to children to stop this misbehaviour.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The char event RESET is emitted when a char device is opened.
Give it a better name.
Patchworks-ID: 35287
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 56aebc8916 changed gdbstub in way
that debugging 32 or 16-bit guest code is no longer possible with qemu
for x86_64 guest CPUs. Since that commit, qemu only provides registers
sets for 64-bit, forcing current and foreseeable gdb to also switch its
architecture to 64-bit. And this breaks if the inferior is 32 or 16 bit.
No question, this is a gdb issue. But, as it was confirmed in several
discusssions with gdb people, it is a non-trivial thing to fix. So until
qemu finds a gdb version attach with a rework x86 support, we have to
work around it by switching the register layout as the guest switches
its execution mode between 16/32 and 64 bit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Put space between = and * when dereferencing a pointer,
to avoid confusion with old-style "*="
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
cpu_synchronize_state() is a little unreadable since the 'modified'
argument isn't self-explanatory. Simplify it by making it always
synchronize the kernel state into qemu, and automatically flush the
registers back to the kernel if they've been synchronized on this
exit.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows to set segment registers via gdb also in system emulation
mode. Basic sanity checks are applied and nothing is changed if they
fail. But screwing up the target via this interface will never be
complicated, so I avoided being too paranoid here.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Clarify gdb's register set layout by using constants for
cpu_gdb_read/write_register.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds support for the vCont remote gdb command. It is used by
gdb 6.8 or better to switch the debugging focus for single-stepping
multi-threaded targets, ie. multi-threaded application in user mode
emulation or VCPUs in system emulation.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When debugging multi-threaded programs, QEMU's gdb stub would report the
correct number of threads (the qfThreadInfo and qsThreadInfo packets).
However, the stub was unable to actually switch between threads (the T
packet), since it would report every thread except the first as being
dead. Furthermore, the stub relied upon cpu_index as a reliable means
of assigning IDs to the threads. This was a bad idea; if you have this
sequence of events:
initial thread created
new thread #1
new thread #2
thread #1 exits
new thread #3
thread #3 will have the same cpu_index as thread #1, which would confuse
GDB. (This problem is partly due to the remote protocol not having a
good way to send thread creation/destruction events.)
We fix this by using the host thread ID for the identifier passed to GDB
when debugging a multi-threaded userspace program. The thread ID might
wrap, but the same sort of problems with wrapping thread IDs would come
up with debugging programs natively, so this doesn't represent a
problem.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
The code for handling the c and s packets both contain code for setting
the pc. Move that code out to a common function.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7039 c046a42c-6fe2-441c-8c8c-71466251a162
Introduce a more canonical gdbstub configuration (system emulation only)
via the new switch '-gdb dev'. Keep '-s' as shorthand for
'-gdb tcp::1234'. Use the same syntax also for the corresponding monitor
command 'gdbserver'. Its default remains to listen on TCP port 1234.
Changes in v4:
- Rebased over new command line switches meta file
Changes in v3:
- Fix documentation
Changes in v2:
- Support for pipe-based like to gdb (target remote | qemu -gdb stdio)
- Properly update the qemu-doc
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6992 c046a42c-6fe2-441c-8c8c-71466251a162
[ Note: depends on char closing fixes ]
Properly clean up the gdbstub when the user tries to re-open it
(possibly under a different address). Moreover, allow to shut it down
from the monitor via 'gdbserver none'.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6913 c046a42c-6fe2-441c-8c8c-71466251a162
This is a backport of the guest debugging support for the KVM
accelerator that is now part of the KVM tree. It implements the reworked
KVM kernel API for guest debugging (KVM_CAP_SET_GUEST_DEBUG) which is
not yet part of any mainline kernel but will probably be 2.6.30 stuff.
So far supported is x86, but PPC is expected to catch up soon.
Core features are:
- unlimited soft-breakpoints via code patching
- hardware-assisted x86 breakpoints and watchpoints
Changes in this version:
- use generic hook cpu_synchronize_state to transfer registers between
user space and kvm
- push kvm_sw_breakpoints into KVMState
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6825 c046a42c-6fe2-441c-8c8c-71466251a162
Create a monitor terminal and pass it through the gdbstub. This allows
to use gdb's monitor command to access the QEMU monitor. Works for all
commands except for non-detached migration and password retrieval (user
will receive error messages instead).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6718 c046a42c-6fe2-441c-8c8c-71466251a162
Define GDB_CORE_XML and hack things similarly to ARM so that despite the
FP registers coming in between the GPRs and some status registers,
everything works out OK no matter which kind of GDB we're communicating
with.
It matters whether we're built to target 64-bit or 32-bit cores. I
think there are still problems if we are debugging 32-bit programs on a
built-for-64-bit QEMU (QEMU will always send 64-bit registers), but I
don't know if there's a good way around that at the time being.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6421 c046a42c-6fe2-441c-8c8c-71466251a162
And use it for the malta emulation. Fix segfault introduced in
revision 6352.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6365 c046a42c-6fe2-441c-8c8c-71466251a162
As reported by Martin Mohring fork doesn't work with NPTL.
A fix is attached that makes the also attached test run
(tested with ARM CodeSourcery 2008q3 on an x86_64
Fedora Core with kernel 2.6.23).
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6195 c046a42c-6fe2-441c-8c8c-71466251a162
The attached patch updates the FSF address in the GPL/LGPL boilerplate
in most GPL/LGPLed files, and also in COPYING.LIB.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
Handle signals in the user-mode GDB stub. Report them to GDB, and
allow it to change or cancel them. Also correct the protocol numbering;
it happens to match Linux numbering for SIGINT and SIGTRAP, but that's
just good fortune.
Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6096 c046a42c-6fe2-441c-8c8c-71466251a162
Close gdbserver in child processes, so that only one stub tries to talk
to GDB at a time. Updated from an earlier patch by Paul Brook.
Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6095 c046a42c-6fe2-441c-8c8c-71466251a162
Obviously, someone forgot to rebase the index before accessing one of
the 32 FPRs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5821 c046a42c-6fe2-441c-8c8c-71466251a162
This patch enhances QEMU's built-in debugger for SMP guest debugging.
Using the thread support of the gdb remote protocol, each VCPU is mapped
on a pseudo thread and exposed to the gdb frontend. This way you can
easy switch the focus of gdb between the VCPUs and observe their states.
On breakpoint hit, the focus is automatically adjusted just as for
normal multi-threaded application under gdb control.
Furthermore, the patch propagates breakpoint and watchpoint insertions
or removals to all CPUs, not just the current one as it was the case so
far. Without this, SMP guest debugging was practically unfeasible.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5743 c046a42c-6fe2-441c-8c8c-71466251a162
This patch prepares the QEMU cpu_watchpoint/breakpoint API to allow the
succeeding enhancements this series comes with.
First of all, it overcomes MAX_BREAKPOINTS/MAX_WATCHPOINTS by switching
to dynamically allocated data structures that are kept in linked lists.
This also allows to return a stable reference to the related objects,
required for later introduced x86 debug register support.
Breakpoints and watchpoints are stored with their full information set
and an additional flag field that makes them easily extensible for use
beyond pure guest debugging.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5738 c046a42c-6fe2-441c-8c8c-71466251a162
Return the appropriate type prefix (r, a, none) when reporting
watchpoint hits to the gdb front-end.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5737 c046a42c-6fe2-441c-8c8c-71466251a162
This patch makes qemu keep track of the character devices in use and
implements a "info chardev" monitor command to print a list.
qemu_chr_open() sticks the devices into a linked list now. It got a new
argument (label), so there is a name for each device. It also assigns a
filename to each character device. By default it just copyes the
filename passed in. Individual drivers can fill in something else
though. qemu_chr_open_pty() sets the filename to name of the pseudo tty
allocated.
Output looks like this:
(qemu) info chardev
monitor: filename=unix:/tmp/run.sh-26827/monitor,server,nowait
serial0: filename=unix:/tmp/run.sh-26827/console,server
serial1: filename=pty:/dev/pts/5
parallel0: filename=vc:640x480
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5575 c046a42c-6fe2-441c-8c8c-71466251a162
Define XER bits as a single register and access them individually to
avoid defining 5 32-bit registers (TCG doesn't permit to map 8-bit
registers).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5500 c046a42c-6fe2-441c-8c8c-71466251a162
The IO index is now stored in its own field, instead of being wedged
into the vaddr field. This eliminates the ROMD and watchpoint host
pointer weirdness. The IO index space is expanded by 1 bit, and
several additional bits are made available in the TLB vaddr field.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4704 c046a42c-6fe2-441c-8c8c-71466251a162
Implement the 'k' gdbserial packet which kills the qemu instance via
the debugger stub.
Implement the 'D' detach packet for the gdb stub such that you can
disconnect gdb with the "detach" command. This required implementing
a cpu_breakpoint_remove_all() and a cpu_watchpoint_remove_all()
function to cleanup all the breakpoints and watchpoints prior to
leaving the gdb stub else simulation can stop with no debugger
attached.
On a '?' packet remove all the breakpoints and watchpoints. This is
considered more of a safety net in case you force killed gdb or it
crashed and you are reconnecting. The identical behavior exists for
kgdb in the linux kernel.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4478 c046a42c-6fe2-441c-8c8c-71466251a162
This patch allows the qemu backend debugger to single step an
instruction without running the hardware interrupts.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4391 c046a42c-6fe2-441c-8c8c-71466251a162
routines. Coming back to a raw MSR storage model then speed-up the emulation.
Improve fast MSR updates (wrtee wrteei and mtriee cases).
Share rfi family instructions helpers code to avoid bug in duplicated code.
Allow entering halt mode as the result of a rfi instruction.
Add a new helper_regs.h file to avoid duplication of special registers
manipulation routines (currently XER and MSR).
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3436 c046a42c-6fe2-441c-8c8c-71466251a162
- Add status file to make regression tracking easier
- Move all micro-operations helpers definitions into a separate header:
should never be seen outside of op.c
- Update copyrights
- Add new / missing PowerPC CPU definitions
- Add definitions for PowerPC BookE
- Add support for PowerPC 6xx/7xx software driven TLBs
Allow use of PowerPC 603 as an example
- Add preliminary code for POWER, POWER2, PowerPC 403, 405, 440, 601, 602
and BookE support
- Avoid compiling priviledged only resources support for user-mode emulation
- Remove unused helpers / micro-ops / dead code
- Add instructions usage statistics dump: useful to figure which instructions
need strong optimizations.
- Micro-operation fixes:
* add missing RETURN in some micro-ops
* fix prototypes
* use softfloat routines for all floating-point operations
* fix tlbie instruction
* move some huge micro-operations into helpers
- emulation fixes:
* fix inverted opcodes for fcmpo / fcmpu
* condition register update is always to be done after the whole
instruction has completed
* add missing NIP updates when calling helpers that may generate an
exception
- optimizations and improvments:
* optimize very often used instructions (li, mr, rlwixx...)
* remove specific micro-ops for rarely used instructions
* add routines for addresses computations to avoid bugs due to multiple
different implementations
* fix TB linking: do not reset T0 at the end of every TB.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2473 c046a42c-6fe2-441c-8c8c-71466251a162
