Currently, the [m|s]tval CSRs are set with trapping instruction encoding
only for illegal instruction traps taken at the time of instruction
decoding.
In RISC-V world, a valid instructions might also trap as illegal or
virtual instruction based to trapping bits in various CSRs (such as
mstatus.TVM or hstatus.VTVM).
We improve setting of [m|s]tval CSRs for all types of illegal and
virtual instruction traps.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220511144528.393530-4-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, QEMU does not set hstatus.GVA bit for traps taken from
HS-mode into HS-mode which breaks the Xvisor nested MMU test suite
on QEMU. This was working previously.
This patch updates riscv_cpu_do_interrupt() to fix the above issue.
Fixes: 86d0c45739 ("target/riscv: Fixup setting GVA")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220511144528.393530-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When hypervisor and VS CSRs are accessed from VS-mode or VU-mode,
the riscv_csrrw_check() function should generate virtual instruction
trap instead illegal instruction trap.
Fixes: 0a42f4c440 (" target/riscv: Fix CSR perm checking for HS mode")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-Id: <20220511144528.393530-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"mimpid" cpu option was mistyped to "mipid".
Fixes: 9951ba94 ("target/riscv: Support configuarable marchid, mvendorid, mipid CSR values")
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220523153147.15371-1-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- setting ext_g will implicitly set ext_i
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220518012611.6772-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The QOM API already provides accessors for uint32 values, so reuse them.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220301225220.239065-3-shentey@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The QOM API already provides getters for uint64 and uint32 values, so reuse
them.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301225220.239065-2-shentey@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We should separate "check" and "configure" steps as possible.
This commit separates both steps except vector/Zfinx-related checks.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <c3145fa37a529484cf3047c8cb9841e9effad4b0.1652583332.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QEMU allowed inconsistent configurations that made floating point
arithmetic effectively unusable.
This commit adds certain checks for consistent FP arithmetic:
- F requires Zicsr
- Zfinx requires Zicsr
- Zfh/Zfhmin require F
- D requires F
- V requires D
Because F/D/Zicsr are enabled by default (and an error will not occur unless
we manually disable one or more of prerequisites), this commit just enforces
the user to give consistent combinations.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <00e7b1c6060dab32ac7d49813b1ca84d3eb63298.1652583332.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
On ISA version 20190608 or later, "G" expands to "IMAFD_Zicsr_Zifencei".
Both "Zicsr" and "Zifencei" are enabled by default and "G" is supposed to
be (virtually) enabled as well, it should be safe to change its expansion.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <d1b5be550a2893a0fd32c928f832d2ff7bfafe35.1652583332.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Because "G" virtual extension expands to "IMAFD", we cannot separately
disable extensions like "F" or "D" without disabling "G". Because all
"IMAFD" are enabled by default, it's harmless to disable "G" by default.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <cab7205f1d7668f642fa242386543334af6bc1bd.1652583332.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Because ext_? members are boolean variables, operator `&&' should be
used instead of `&'.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <91633f8349253656dd08bc8dc36498a9c7538b10.1652583332.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If specified CPU configuration is not valid, not just it prints error
message, it aborts and generates core dumps (depends on the operating
system). This kind of error handling should be used only when a serious
runtime error occurs.
This commit makes error handling on CPU configuration more generous on
sifive_e/u and opentitan machines. It now just prints error message and
quits (without coredumps and aborts).
This is separate from spike/virt because it involves different type
(TYPE_RISCV_HART_ARRAY) on sifive_e/u and opentitan machines.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <09e61e58a7543da44bdb0e0f5368afc8903b4aa6.1652509778.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If specified CPU configuration is not valid, not just it prints error
message, it aborts and generates core dumps (depends on the operating
system). This kind of error handling should be used only when a serious
runtime error occurs.
This commit makes error handling on CPU configuration more generous on
virt/spike machines. It now just prints error message and quits (without
coredumps and aborts).
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <d17381d3ea4992808cf1894f379ca67220f61b45.1652509778.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Because some operating systems don't correctly parse long ISA extension
string, this commit adds short-isa-string boolean option to disable
generating long ISA extension strings on Device Tree.
For instance, enabling Zfinx and Zdinx extensions and booting Linux (5.17 or
earlier) with FPU support caused a kernel panic.
Operating Systems which short-isa-string might be helpful:
1. Linux (5.17 or earlier)
2. FreeBSD (at least 14.0-CURRENT)
3. OpenBSD (at least current development version)
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <7c1fe5f06b0a7646a47e9bcdddb1042bb60c69c8.1652181972.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit moves ISA string conversion for Zhinx and Zhinxmin extensions.
Because extension category ordering of "H" is going to be after "V",
their ordering is going to be valid (on canonical order).
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <7a988aedb249b6709f9ce5464ff359b60958ca54.1652181972.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
timecmp update function should be invoked with hartid for which
timecmp is being updated. The following patch passes the incorrect
hartid to the update function.
Fixes: e2f01f3c2e ("hw/intc: Make RISC-V ACLINT mtime MMIO register writable")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220513221458.1192933-1-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector whole register load instructions have EEW encoded in the opcode,
so we shouldn't take SEW here. Vector whole register store instructions
are always EEW=8.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165181414065.18540.14828125053334599921-0@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
VS mode access to hypervisor CSRs should generate virtual, not illegal,
instruction exceptions.
Don't return early and indicate an illegal instruction exception when
accessing a hypervisor CSR from VS mode. Instead, fall through to the
`hmode` predicate to return the correct virtual instruction exception.
Signed-off-by: Dylan Reid <dgreid@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220506165456.297058-1-dgreid@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* Improve the cleanup of the QEMU binary in case of failing qtests
* Update the Windows support statement
* Remove the capstone submodule (and rely on Capstone of the distros instead)
-----BEGIN PGP SIGNATURE-----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=z6e9
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2022-05-18' of https://gitlab.com/thuth/qemu into staging
* Remove Ubuntu 18.04 containers (not supported anymore)
* Improve the cleanup of the QEMU binary in case of failing qtests
* Update the Windows support statement
* Remove the capstone submodule (and rely on Capstone of the distros instead)
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmKEovQRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXXtxAAsjL2M/kUcr1KBSfkaMhTa0D3OKPQ+p/e
# Bac/9+l7UhZZLLffzg53lSsCmlj9cSr5cVUkooT7IFS03wauH7ZJ/wuefIS8IYED
# jREmeMWXmVTTfQo4QQZ+6T+XknG2DWjzXQ3sNat71LH4RbHXO5um3zYIdDUaujP+
# v4sAKKH+F/FUsEXMP1rFmZpkaWOcvsuSwP/H4kEfhlovebAZINPow26eYYRrTM2t
# Ifs7HelO12TlmqlBFn0UzHj8bV8MZkqcjj0efocVzuYMQ8DVcxE7IPc3tft2PuUu
# Ia+Czh1hLsLA1zYiO/nN9bVIIewFGOErASzjlYWUlQwNRc1nLik+m+p4Cl9WOEhL
# JpkN/yY3pTI5uC6a4KgxDQGTeFUR4D5la6Hg7yQjQbTBMEeGFCV50iOdkItdnRBx
# ByReVctXS3oIhsDqHMb8qydlBkPp5pUrAXdj43IBCUb3UsrHmCxH+z8U5BhHvv4D
# OleykLKyMcuff6HcEpC1fBQNIFJX5uS69EtAXYtyo2kb5zAJWezCv65UPldAZJCT
# kRT4beueQ+d5t+4LZn1qNePdoyeFArdCLlOqg/3Fx08kM5eEv22pSQhOtWclE7U3
# tgorikFybClvKJ+YnXBAxD7oFKe+h9L+RYCFOgoTebrbMX54IjjJfeo2DydhHTt7
# IaJnsI+vvAA=
# =z6e9
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 May 2022 12:40:36 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-05-18' of https://gitlab.com/thuth/qemu:
capstone: Remove the capstone submodule
capstone: Allow version 3.0.5 again
tests/vm: Add capstone to the NetBSD and OpenBSD VMs
docs/about: Update the support statement for Windows
tests/qtest: use prctl(PR_SET_PDEATHSIG) as fallback to kill QEMU
tests/qtest: fix registration of ABRT handler for QEMU cleanup
Remove Ubuntu 18.04 container support from the repository
gitlab-ci: Switch the container of the 'check-patch' & 'check-dco' jobs
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Implement FEAT_S2FWB
* Implement FEAT_IDST
* Drop unsupported_encoding() macro
* hw/intc/arm_gicv3: Use correct number of priority bits for the CPU
* Fix aarch64 debug register names
* hw/adc/zynq-xadc: Use qemu_irq typedef
* target/arm/helper.c: Delete stray obsolete comment
* Make number of counters in PMCR follow the CPU
* hw/arm/virt: Fix dtb nits
* ptimer: Rename PTIMER_POLICY_DEFAULT to PTIMER_POLICY_LEGACY
* target/arm: Fix PAuth keys access checks for disabled SEL2
* Enable FEAT_HCX for -cpu max
* Use FIELD definitions for CPACR, CPTR_ELx
-----BEGIN PGP SIGNATURE-----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=F3ow
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20220519' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Implement FEAT_S2FWB
* Implement FEAT_IDST
* Drop unsupported_encoding() macro
* hw/intc/arm_gicv3: Use correct number of priority bits for the CPU
* Fix aarch64 debug register names
* hw/adc/zynq-xadc: Use qemu_irq typedef
* target/arm/helper.c: Delete stray obsolete comment
* Make number of counters in PMCR follow the CPU
* hw/arm/virt: Fix dtb nits
* ptimer: Rename PTIMER_POLICY_DEFAULT to PTIMER_POLICY_LEGACY
* target/arm: Fix PAuth keys access checks for disabled SEL2
* Enable FEAT_HCX for -cpu max
* Use FIELD definitions for CPACR, CPTR_ELx
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmKGf/kZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3h5fD/9+2ymBkwX9jIaaOooejZrJ
# CUVCPL2w206eZbPihgE4snZcZdkGjteDhS30kipyJxFNaCE0d2qQLTMrPXQMKyGz
# aqCcvSSdb+VraVOP7RpfqYrkzFsj/+K/F5NHn3Vf/T7ULLQJFk0JZ4UWnt7/rkhL
# oaXGDm79JrFfMTWUu2AKtCGj132YXyH2YP7GmvYyIty3l+hR9a8mwx3EcFTewuEn
# U7AZGZL2GfixGLZU/nNRcTu/BOlkdU6PM1BZoprs7HwbMXR1+pBCX6bwIXK35Q6/
# vCu8e/4+Hi4cd7nxRXqQ7+KuIdcEB+LwupN61othVUl2lnfQgNcvj2hhiWJkxdRI
# gpRktnnf6QNWsQ7HWShB5o8HhDN9v82wMf8VSiN1XncN6oYWZSEAMa4NbV/1ditY
# yolJww/onnre8A07xTzBqIXqKRViwUMltXSamUpuWx4UsSMOql/ktJYsXqSnJWP+
# cpTqQ+VQKj8cTotvDTnxKsOiI/RraSAzW1amle0x2Ff8I6AN45j1S3GuT9EyJJ3w
# CabegyYloJChI2Gnqf5Pc+B108E/GwHlcsmgaN5FEjlGzluKa7Ii0D2f1Cey1tAl
# iTqJ3dRFjhkll6a88TN47QRtDJadXp+PjQzzQxtEM1wXhJLWXTxocvBn0cGg2OnY
# 4eMY1YLtD9neCnKvdZdw9g==
# =F3ow
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 May 2022 10:35:53 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20220519' of https://git.linaro.org/people/pmaydell/qemu-arm: (22 commits)
target/arm: Use FIELD definitions for CPACR, CPTR_ELx
target/arm: Enable FEAT_HCX for -cpu max
target/arm: Fix PAuth keys access checks for disabled SEL2
ptimer: Rename PTIMER_POLICY_DEFAULT to PTIMER_POLICY_LEGACY
hw/arm/virt: Drop #size-cells and #address-cells from gpio-keys dtb node
hw/arm/virt: Fix incorrect non-secure flash dtb node name
target/arm: Make number of counters in PMCR follow the CPU
target/arm/helper.c: Delete stray obsolete comment
hw/adc/zynq-xadc: Use qemu_irq typedef
Fix aarch64 debug register names.
hw/intc/arm_gicv3: Provide ich_num_aprs()
hw/intc/arm_gicv3: Use correct number of priority bits for the CPU
hw/intc/arm_gicv3: Support configurable number of physical priority bits
hw/intc/arm_gicv3_kvm.c: Stop using GIC_MIN_BPR constant
hw/intc/arm_gicv3: report correct PRIbits field in ICV_CTLR_EL1
hw/intc/arm_gicv3_cpuif: Handle CPUs that don't specify GICv3 parameters
target/arm: Drop unsupported_encoding() macro
target/arm: Implement FEAT_IDST
target/arm: Enable FEAT_S2FWB for -cpu max
target/arm: Implement FEAT_S2FWB
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We had a few CPTR_* bits defined, but missed quite a few.
Complete all of the fields up to ARMv9.2.
Use FIELD_EX64 instead of manual extract32.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220517054850.177016-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature adds a new register, HCRX_EL2, which controls
many of the newer AArch64 features. So far the register is
effectively RES0, because none of the new features are done.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220517054850.177016-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As per the description of the HCR_EL2.APK field in the ARMv8 ARM,
Pointer Authentication keys accesses should only be trapped to Secure
EL2 if it is enabled.
Signed-off-by: Florian Lugou <florian.lugou@provenrun.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220517145242.1215271-1-florian.lugou@provenrun.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The traditional ptimer behaviour includes a collection of weird edge
case behaviours. In 2016 we improved the ptimer implementation to
fix these and generally make the behaviour more flexible, with
ptimers opting in to the new behaviour by passing an appropriate set
of policy flags to ptimer_init(). For backwards-compatibility, we
defined PTIMER_POLICY_DEFAULT (which sets no flags) to give the old
weird behaviour.
This turns out to be a poor choice of name, because people writing
new devices which use ptimers are misled into thinking that the
default is probably a sensible choice of flags, when in fact it is
almost always not what you want. Rename PTIMER_POLICY_DEFAULT to
PTIMER_POLICY_LEGACY and beef up the comment to more clearly say that
new devices should not be using it.
The code-change part of this commit was produced by
sed -i -e 's/PTIMER_POLICY_DEFAULT/PTIMER_POLICY_LEGACY/g' $(git grep -l PTIMER_POLICY_DEFAULT)
with the exception of a test name string change in
tests/unit/ptimer-test.c which was added manually.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220516103058.162280-1-peter.maydell@linaro.org
The virt board generates a gpio-keys node in the dtb, but it
incorrectly gives this node #size-cells and #address-cells
properties. If you dump the dtb with 'machine dumpdtb=file.dtb'
and run it through dtc, dtc will warn about this:
Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Remove the bogus properties.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220513131316.4081539-3-peter.maydell@linaro.org
In the virt board with secure=on we put two nodes in the dtb
for flash devices: one for the secure-only flash, and one
for the non-secure flash. We get the reg properties for these
correct, but in the DT node name, which by convention includes
the base address of devices, we used the wrong address. Fix it.
Spotted by dtc, which will complain
Warning (unique_unit_address): /flash@0: duplicate unit-address (also used in node /secflash@0)
if you dump the dtb from QEMU with -machine dumpdtb=file.dtb
and then decompile it with dtc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220513131316.4081539-2-peter.maydell@linaro.org
Currently we give all the v7-and-up CPUs a PMU with 4 counters. This
means that we don't provide the 6 counters that are required by the
Arm BSA (Base System Architecture) specification if the CPU supports
the Virtualization extensions.
Instead of having a single PMCR_NUM_COUNTERS, make each CPU type
specify the PMCR reset value (obtained from the appropriate TRM), and
use the 'N' field of that value to define the number of counters
provided.
This means that we now supply 6 counters instead of 4 for:
Cortex-A9, Cortex-A15, Cortex-A53, Cortex-A57, Cortex-A72,
Cortex-A76, Neoverse-N1, '-cpu max'
This CPU goes from 4 to 8 counters:
A64FX
These CPUs remain with 4 counters:
Cortex-A7, Cortex-A8
This CPU goes down from 4 to 3 counters:
Cortex-R5
Note that because we now use the PMCR reset value of the specific
implementation, we no longer set the LC bit out of reset. This has
an UNKNOWN value out of reset for all cores with any AArch32 support,
so guest software should be setting it anyway if it wants it.
This change was originally landed in commit f7fb73b8cd (during
the 6.0 release cycle) but was then reverted by commit
21c2dd77a6 before that release because it did not work with KVM.
This version fixes that by creating the scratch vCPU in
kvm_arm_get_host_cpu_features() with the KVM_ARM_VCPU_PMU_V3 feature
if KVM supports it, and then only asking KVM for the PMCR_EL0 value
if the vCPU has a PMU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: Added the correct value for a64fx]
Message-id: 20220513122852.4063586-1-peter.maydell@linaro.org
In commit 88ce6c6ee8 we switched from directly fishing the number
of breakpoints and watchpoints out of the ID register fields to
abstracting out functions to do this job, but we forgot to delete the
now-obsolete comment in define_debug_regs() about the relation
between the ID field value and the actual number of breakpoints and
watchpoints. Delete the obsolete comment.
Reported-by: CHRIS HOWARD <cvz185@web.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220513131801.4082712-1-peter.maydell@linaro.org
Except hw/core/irq.c which implements the forward-declared opaque
qemu_irq structure, hw/adc/zynq-xadc.{c,h} are the only files not
using the typedef. Fix this single exception.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20220509202035.50335-1-philippe.mathieu.daude@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Give all the debug registers their correct names including the
index, rather than having multiple registers all with the
same name string, which is confusing when viewed over the
gdbstub interface.
Signed-off-by: CHRIS HOWARD <cvz185@web.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 4127D8CA-D54A-47C7-A039-0DB7361E30C0@web.de
[PMM: expanded commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We previously open-coded the expression for the number of virtual APR
registers and the assertion that it was not going to cause us to
overflow the cs->ich_apr[] array. Factor this out into a new
ich_num_aprs() function, for consistency with the icc_num_aprs()
function we just added for the physical APR handling.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-7-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-6-peter.maydell@linaro.org
Make the GICv3 set its number of bits of physical priority from the
implementation-specific value provided in the CPU state struct, in
the same way we already do for virtual priority bits. Because this
would be a migration compatibility break, we provide a property
force-8-bit-prio which is enabled for 7.0 and earlier versioned board
models to retain the legacy "always use 8 bits" behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-6-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-5-peter.maydell@linaro.org
The GICv3 code has always supported a configurable number of virtual
priority and preemption bits, but our implementation currently
hardcodes the number of physical priority bits at 8. This is not
what most hardware implementations provide; for instance the
Cortex-A53 provides only 5 bits of physical priority.
Make the number of physical priority/preemption bits driven by fields
in the GICv3CPUState, the way that we already do for virtual
priority/preemption bits. We set cs->pribits to 8, so there is no
behavioural change in this commit. A following commit will add the
machinery for CPUs to set this to the correct value for their
implementation.
Note that changing the number of priority bits would be a migration
compatibility break, because the semantics of the icc_apr[][] array
changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-5-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-4-peter.maydell@linaro.org
The GIC_MIN_BPR constant defines the minimum BPR value that the TCG
emulated GICv3 supports. We're currently using this also as the
value we reset the KVM GICv3 ICC_BPR registers to, but this is only
right by accident.
We want to make the emulated GICv3 use a configurable number of
priority bits, which means that GIC_MIN_BPR will no longer be a
constant. Replace the uses in the KVM reset code with literal 0,
plus a constant explaining why this is reasonable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-4-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-3-peter.maydell@linaro.org
As noted in the comment, the PRIbits field in ICV_CTLR_EL1 is
supposed to match the ICH_VTR_EL2 PRIbits setting; that is, it is the
virtual priority bit setting, not the physical priority bit setting.
(For QEMU currently we always implement 8 bits of physical priority,
so the PRIbits field was previously 7, since it is defined to be
"priority bits - 1".)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-3-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-2-peter.maydell@linaro.org
We allow a GICv3 to be connected to any CPU, but we don't do anything
to handle the case where the CPU type doesn't in hardware have a
GICv3 CPU interface and so the various GIC configuration fields
(gic_num_lrs, vprebits, vpribits) are not specified.
The current behaviour is that we will add the EL1 CPU interface
registers, but will not put in the EL2 CPU interface registers, even
if the CPU has EL2, which will leave the GIC in a broken state and
probably result in the guest crashing as it tries to set it up. This
only affects the virt board when using the cortex-a15 or cortex-a7
CPU types (both 32-bit) with -machine gic-version=3 (or 'max')
and -machine virtualization=on.
Instead of failing to set up the EL2 registers, if the CPU doesn't
define the GIC configuration set it to a reasonable default, matching
the standard configuration for most Arm CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-2-peter.maydell@linaro.org
The unsupported_encoding() macro logs a LOG_UNIMP message and then
generates code to raise the usual exception for an unallocated
encoding. Back when we were still implementing the A64 decoder this
was helpful for flagging up when guest code was using something we
hadn't yet implemented. Now we completely cover the A64 instruction
set it is barely used. The only remaining uses are for five
instructions whose semantics are "UNDEF, unless being run under
external halting debug":
* HLT (when not being used for semihosting)
* DCPSR1, DCPS2, DCPS3
* DRPS
QEMU doesn't implement external halting debug, so for us the UNDEF is
the architecturally correct behaviour (because it's not possible to
execute these instructions with halting debug enabled). The
LOG_UNIMP doesn't serve a useful purpose; replace these uses of
unsupported_encoding() with unallocated_encoding(), and delete the
macro.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220509160443.3561604-1-peter.maydell@linaro.org
The Armv8.4 feature FEAT_IDST specifies that exceptions generated by
read accesses to the feature ID space should report a syndrome code
of 0x18 (EC_SYSTEMREGISTERTRAP) rather than 0x00 (EC_UNCATEGORIZED).
The feature ID space is defined to be:
op0 == 3, op1 == {0,1,3}, CRn == 0, CRm == {0-7}, op2 == {0-7}
In our implementation we might return the EC_UNCATEGORIZED syndrome
value for a system register access in four cases:
* no reginfo struct in the hashtable
* cp_access_ok() fails (ie ri->access doesn't permit the access)
* ri->accessfn returns CP_ACCESS_TRAP_UNCATEGORIZED at runtime
* ri->type includes ARM_CP_RAISES_EXC, and the readfn raises
an UNDEF exception at runtime
We have very few regdefs that set ARM_CP_RAISES_EXC, and none of
them are in the feature ID space. (In the unlikely event that any
are added in future they would need to take care of setting the
correct syndrome themselves.) This patch deals with the other
three cases, and enables FEAT_IDST for AArch64 -cpu max.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220509155457.3560724-1-peter.maydell@linaro.org
Enable the FEAT_S2FWB for -cpu max. Since FEAT_S2FWB requires that
CLIDR_EL1.{LoUU,LoUIS} are zero, we explicitly squash these (the
inherited CLIDR_EL1 value from the Cortex-A57 has them as 1).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220505183950.2781801-5-peter.maydell@linaro.org
Implement the handling of FEAT_S2FWB; the meat of this is in the new
combined_attrs_fwb() function which combines S1 and S2 attributes
when HCR_EL2.FWB is set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220505183950.2781801-4-peter.maydell@linaro.org
Factor out the part of combine_cacheattrs() that is specific to
handling HCR_EL2.FWB == 0. This is the part where we combine the
memory type and cacheability attributes.
The "force Outer Shareable for Device or Normal Inner-NC Outer-NC"
logic remains in combine_cacheattrs() because it holds regardless
(this is the equivalent of the pseudocode EffectiveShareability()
function).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220505183950.2781801-3-peter.maydell@linaro.org
In the original Arm v8 two-stage translation, both stage 1 and stage
2 specify memory attributes (memory type, cacheability,
shareability); these are then combined to produce the overall memory
attributes for the whole stage 1+2 access. In QEMU we implement this
by having get_phys_addr() fill in an ARMCacheAttrs struct, and we
convert both the stage 1 and stage 2 attribute bit formats to the
same encoding (an 8-bit attribute value matching the MAIR_EL1 fields,
plus a 2-bit shareability value).
The new FEAT_S2FWB feature allows the guest to enable a different
interpretation of the attribute bits in the stage 2 descriptors.
These bits can now be used to control details of how the stage 1 and
2 attributes should be combined (for instance they can say "always
use the stage 1 attributes" or "ignore the stage 1 attributes and
always be Device memory"). This means we need to pass the raw bit
information for stage 2 down to the function which combines the stage
1 and stage 2 information.
Add a field to ARMCacheAttrs that indicates whether the attrs field
should be interpreted as MAIR format, or as the raw stage 2 attribute
bits from the descriptor, and store the appropriate values when
filling in cacheattrs.
We only need to interpret the attrs field in a few places:
* in do_ats_write(), where we know to expect a MAIR value
(there is no ATS instruction to do a stage-2-only walk)
* in S1_ptw_translate(), where we want to know whether the
combined S1 + S2 attributes indicate Device memory that
should provoke a fault
* in combine_cacheattrs(), which does the S1 + S2 combining
Update those places accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220505183950.2781801-2-peter.maydell@linaro.org
This series updates the SeaBIOS-hppa firmware to version 5, in which additional
HP fonts were added to the firmware and the firmware boot console was fixed to
accept input from the emulated PS/2 keyboard when running in graphical mode
(serial console was working before already). To test use the "-boot menu=on"
qemu option.
The artist graphics card driver got various fixes when running the X11-Windows
on HP-UX:
- fixes the horizontal and vertical postioning of the X11 cursor with HP-UX
- allows X11 to blank the screen (e.g. screensaver)
- allows the X11 driver to turn the X11 cursor on/off
Signed-off-by: Helge Deller <deller@gmx.de>
--
Changes compared to version 2 of this series:
- Fixed style issues in the X-cursor positioning patch (noticed by Mark Cave-Ayland)
Changes compared to version 1 of this series:
- Added some Acked-by's from Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- SeaBIOS-hppa v5 instead of v4 (PS/2 keyboard now works in boot console)
- integrated artist X11 X-cusor positioning fix (which was sent serperately before)
--
This series should apply cleanly on git head and can be pulled for testing
from: https://github.com/hdeller/qemu-hppa.git artist-cursor-fix-final
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYoUcLwAKCRD3ErUQojoP
X/joAQCmuV5MD+BTWf91fRTfzXSfOYSp1XahTaItUldKG2ZBWQD+Lflhsoyg4xLd
2daeDRN1tH2HWldjnCPyMyZ5Ag97PwY=
=ZrTm
-----END PGP SIGNATURE-----
Merge tag 'artist-cursor-fix-final-pull-request' of https://github.com/hdeller/qemu-hppa into staging
hppa: Artist graphics driver fixes for HP-UX and keyboard fix in firmware boot console
This series updates the SeaBIOS-hppa firmware to version 5, in which additional
HP fonts were added to the firmware and the firmware boot console was fixed to
accept input from the emulated PS/2 keyboard when running in graphical mode
(serial console was working before already). To test use the "-boot menu=on"
qemu option.
The artist graphics card driver got various fixes when running the X11-Windows
on HP-UX:
- fixes the horizontal and vertical postioning of the X11 cursor with HP-UX
- allows X11 to blank the screen (e.g. screensaver)
- allows the X11 driver to turn the X11 cursor on/off
Signed-off-by: Helge Deller <deller@gmx.de>
--
Changes compared to version 2 of this series:
- Fixed style issues in the X-cursor positioning patch (noticed by Mark Cave-Ayland)
Changes compared to version 1 of this series:
- Added some Acked-by's from Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- SeaBIOS-hppa v5 instead of v4 (PS/2 keyboard now works in boot console)
- integrated artist X11 X-cusor positioning fix (which was sent serperately before)
--
This series should apply cleanly on git head and can be pulled for testing
from: https://github.com/hdeller/qemu-hppa.git artist-cursor-fix-final
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYoUcLwAKCRD3ErUQojoP
# X/joAQCmuV5MD+BTWf91fRTfzXSfOYSp1XahTaItUldKG2ZBWQD+Lflhsoyg4xLd
# 2daeDRN1tH2HWldjnCPyMyZ5Ag97PwY=
# =ZrTm
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 May 2022 09:17:51 AM PDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'artist-cursor-fix-final-pull-request' of https://github.com/hdeller/qemu-hppa:
artist: Fix X cursor position calculation in X11
artist: Emulate screen blanking
artist: Allow to turn cursor on or off
artist: Fix vertical X11 cursor position in HP-UX
artist: Use human-readable variable names instead of reg_xxx
artist: Introduce constant for max cursor size
seabios-hppa: Update SeaBIOS-hppa to VERSION 5
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we allow compiling with Capstone v3.0.5 again, all our supported
build hosts should provide at least this version of the disassembler
library, so we do not need to ship this as a submodule anymore.
Message-Id: <20220516145823.148450-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
According to
https://lore.kernel.org/qemu-devel/20200921174118.39352-1-richard.henderson@linaro.org/
there was an issue with Capstone 3.0.4 from Ubuntu 18, which was the reason
for bumping our minimum Capstone requirement to version 4.0. And indeed,
compiling with that version 3.0.4 from Ubuntu 18.04 still fails (after
allowing it with a hack in meson.build). But now that we've dropped support
for Ubuntu 18.04, that issue is not relevant anymore. Compiling with Capstone
version 3.0.5 (e.g. used in Ubuntu 20.04) seems to work fine, so let's allow
that version again.
Message-Id: <20220516145823.148450-3-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The Capstone library that is shipped with NetBSD and OpenBSD works
fine when compiling QEMU, so let's enable this in our build-test
VMs to get a little bit more build-test coverage.
Message-Id: <20220516145823.148450-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Our support statement for Windows currently talks about "Vista / Server
2008" - which is related to the API of Windows, and this is not easy
to understand for the non-technical users. Additionally, glib sets the
_WIN32_WINNT macro to 0x0601 already, which indicates the Windows 7 API,
so QEMU effectively depends on the Windows 7 API, too.
Thus let's bump the _WIN32_WINNT setting in QEMU to the same level as
glib uses and adjust our support statement in the documentation to
something similar that we're using for Linux and the *BSD systems
(i.e. only the two most recent versions), which should hopefully be
easier to understand for the users now.
And since we're nowadays also compile-testing QEMU with MSYS2 on Windows
itself, I think we could mention this build environment here, too.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/880
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20220513063958.1181443-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Although we register a ABRT handler to kill off QEMU when g_assert()
triggers, we want an extra safety net. The QEMU process might be
non-functional and thus not have responded to SIGTERM. The test script
might also have crashed with SEGV, in which case the cleanup handlers
won't ever run.
Using the Linux specific prctl(PR_SET_PDEATHSIG) syscall, we
can ensure that QEMU gets sent SIGKILL as soon as the controlling
qtest exits, if nothing else has correctly told it to quit.
Note, technically the death signal is sent when the *thread* that
called fork() exits. IOW, if you are calling qtest_init() in one
thread, letting that thread exit, and then expecting to run
qtest_quit() in a different thread, things are not going to work
out. Fortunately that is not a scenario that exists in qtests,
as pairs of qtest_init and qtest_quit are always called from the
same thread.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220513154906.206715-3-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qtest_init registers a hook to cleanup the running QEMU process
should g_assert() fire before qtest_quit is called. When the first
hook is registered, it is supposed to triggere registration of the
SIGABRT handler. Unfortunately the logic in hook_list_is_empty is
inverted, so the SIGABRT handler never gets registered, unless
2 or more QEMU processes are run concurrently. This caused qtest
to leak QEMU processes anytime g_assert triggers.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220513154906.206715-2-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
