Commit Graph

59 Commits

Author SHA1 Message Date
Paolo Bonzini 7447545544 change all other clock references to use nanosecond resolution accessors
This was done with:

    sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \
        $(git grep -l 'qemu_get_clock\>' )
    sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \
        $(git grep -l 'qemu_new_timer\>' )

after checking that get_clock and new_timer never occur twice
on the same line.  There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.

There was exactly one false positive in qemu_run_timers:

     -    current_time = qemu_get_clock (clock);
     +    current_time = qemu_get_clock_ns (clock);

which is of course not in this patch.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-03-21 09:23:23 +01:00
Aurelien Jarno 51e08f3e4b mc146818rtc: update registers after a format change
For some unknown reason, the MIPS kernel briefly changes the RTC to
binary mode during boot, switch back to BCD mode and read the time. As
the registers are updated only every second, they may still be in the
old format when they are read.

This patch forces a register update immediately after a format change
(BCD/binary or 12/24H). This avoid long fsck during boot due to time
wrap.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-29 15:19:22 +01:00
Aurelien Jarno c29cd656a8 mc146818rtc: constantify
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-29 15:19:18 +01:00
Gleb Natapov dee41d58ef Keep track of ISA ports ISA device is using in qdev.
Store all io ports used by device in ISADevice structure.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 21:27:46 +00:00
Gleb Natapov f292787d9a make rtc alatm work
Convert alarm time from BCD if needed before comparing with current
time.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06 10:36:27 -05:00
Jan Kiszka 7d932dfdc5 hpet/rtc: Rework RTC IRQ replacement by HPET
Allow the intercept the RTC IRQ for the HPET legacy mode. Then push
routing to IRQ8 completely into the HPET. This allows to turn
hpet_in_legacy_mode() into a private function. Furthermore, this stops
the RTC from clearing IRQ8 even if the HPET is in control.

This patch comes with a side effect: The RTC timers will no longer be
stoppend when there is no IRQ consumer, possibly causing a minor
performance degration. But as the guest may want to redirect the RTC to
the SCI in that mode, it should normally disable unused IRQ source
anyway.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13 15:33:00 +03:00
Blue Swirl aa6f63fff6 mc146818rtc: improve debugging
Add a separate flag for debugging coalesced interrupts.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-30 19:20:07 +00:00
Isaku Yamahata ec51e364ed mc146818rtc: remove #ifdef DEBUG_CMOS.
remove #ifdef DEBUG_CMOS by using macro.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15 16:42:39 +00:00
Isaku Yamahata 1d914fa0af rtc: make rtc_xxx accept/return ISADevice instead of RTCState.
To match rtc_xxx with qdev, make rtc_xxx accept and return ISADevice
instead of RTCState.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15 16:21:49 +00:00
Jan Kiszka dc6839100e mc146818rtc: Register vmstate via qdev
After defining the required alias ID, we can push vmstate registration
of mc146818rtc to qdev.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15 14:34:41 +00:00
Blue Swirl aa28b9bf9b Move x86 specific PC declarations to a separate file
x86 definitions (especially CPUState uses) prevent many files from
being compiled within libhw.

Move x86 specific declarations (APIC stuff) to a separate file.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:46:26 +00:00
Luiz Capitulino 80cd34787f QMP: Introduce RTC_CHANGE event
Emitted whenever the RTC time changes.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08 11:30:09 -06:00
Gleb Natapov dd17765b5f reduce number of reinjects on ACK
Windows 7 BSODs under load with HAL_RTC_IRQF_WILL_NOT_CLEAR error.

It happens here:
hal!HalpRtcUnmaskClock:
8281b93a 8bff            mov     edi,edi
8281b93c 56              push    esi
8281b93d 33f6            xor     esi,esi
8281b93f 6a0c            push    0Ch
8281b941 e8b2ffffff      call    hal!CMOS_READ (8281b8f8)
8281b946 84c0            test    al,al
8281b948 7920            jns     hal!HalpRtcUnmaskClock+0x30 (8281b96a)
8281b94a 6a0a            push    0Ah
8281b94c 46              inc     esi
8281b94d e854c8ffff      call    hal!KeStallExecutionProcessor (828181a6)
8281b952 83fe64          cmp     esi,64h
8281b955 72e8            jb      hal!HalpRtcUnmaskClock+0x5 (8281b93f)
8281b957 6a00            push    0
8281b959 6a00            push    0
8281b95b 6a00            push    0
8281b95d 680a010000      push    10Ah
8281b962 6a5c            push    5Ch
8281b964 ff1500c38082    call    dword ptr [hal!_imp__KeBugCheckEx (8280c300)]
8281b96a 5e              pop     esi
8281b96b c3              ret

So it loops for 100(64h) times reading register C before BSOD. Lets
reduce number of immediate reinjection well under this limit.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-20 08:51:41 -06:00
Gleb Natapov ba32edab7f fix rtc-td-hack on host without high-res timers
On hosts without high-res timers it is impossible to inject rtc interrupt
faster then 1kHz. Windows sometimes configures RTC to generate 1kHz
interrupts, so we can't inject missed interrupts when running on such
hosts. Always injecting an interrupt on REG_C read is also not an option
since Windows wait for REG_C to become zero with interrupt disabled
during boot. This patch uses mixed approach: accelerate timer + inject
up to 1000 interrupts on REG_C read.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12 07:59:38 -06:00
Paul Brook abd0c6bda0 BCD cleanup
Combine multiple BCD implementations.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-22 21:27:40 +00:00
Juan Quintela 73c595e1d5 mc146818rtc: remove rtc_mm_init()
It was used for Acer Pica 61 emulation, removed in 2008
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:43 -05:00
Juan Quintela e0ca7b94da mc146818rtc: fix indentation
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:43 -05:00
Juan Quintela 6b075b8af6 mc146818rtc: port rtc to vmstate
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:43 -05:00
Juan Quintela 048c74c437 mc145818rtc: fix saving of rtc-td hack properly upgrading the version number
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:43 -05:00
Juan Quintela ce88f890bd TARGET_I386 is always defined if TARGET_X86_64 is defined
Patchworks-ID: 35378
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12 09:42:31 -05:00
Markus Armbruster e23a1b33b5 New qdev_init_nofail()
Like qdev_init(), but terminate program via hw_error() instead of
returning an error value.

Use it instead of qdev_init() where terminating the program on failure
is okay, either because it's during machine construction, or because
we know that failure can't happen.

Because relying in the latter is somewhat unclean, and the former is
not always obvious, it would be nice to go back to qdev_init() in the
not-so-obvious cases, only with proper error handling.  I'm leaving
that for another day, because it involves making sure that error
values are properly checked by all callers.

Patchworks-ID: 35168
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07 08:54:54 -05:00
Jan Kiszka 6875204c78 Enable host-clock-based RTC
Switch RTC emulations to the new host_clock instead of vm_clock by
default. This has the advantage that the emulated RTC will follow
automatically the host time while it might be tuned via NTP. vm_clock
can still be selected by passing '-rtc clock=vm' on the command line.

Note that some RTC emulations (at least M48T59) already use the host
time unconditionally while others (namely MC146818) do not. This patch
introduces the required infrastructure for selecting the base clock but
only converts MC146818 for now.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05 09:32:45 -05:00
Anthony Liguori c227f0995e Revert "Get rid of _t suffix"
In the very least, a change like this requires discussion on the list.

The naming convention is goofy and it causes a massive merge problem.  Something
like this _must_ be presented on the list first so people can provide input
and cope with it.

This reverts commit 99a0949b72.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01 16:12:16 -05:00
malc 99a0949b72 Get rid of _t suffix
Some not so obvious bits, slirp and Xen were left alone for the time
being.

Signed-off-by: malc <av1474@comtv.ru>
2009-10-01 22:45:02 +04:00
Juan Quintela 6ee093c907 Unexport ticks_per_sec variable. Create get_ticks_per_sec() function
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11 10:19:52 -05:00
Gerd Hoffmann 32e0c8260d qdev/isa: convert real time clock
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-10 19:48:01 +04:00
Bernhard Kauer 98815437f7 RTC polling mode broken
The RTC emulation does not set the IRQ flags independent of the IRQ enable bits.

The original MC146818A datasheet from 1984 notes:
        "flag bits in Register C [...] are set independent of the
        state of the corresponding enable bits in Register B"
Similar sections can be found in newer documentation e.g. in rtc82885.

Qemu and Bochs set the IRQ flags only if they are enabled,
which breaks drivers polling on them.

The following patch corrects this for the update-ended-flag in Qemu only.
It does not fix the handling of the other flags.

Signed-off-by: Bernhard Kauer <kauer@tudos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09 17:31:27 -05:00
Blue Swirl d60efc6b0d Make CPURead/WriteFunc structure 'const'
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-25 18:29:31 +00:00
Jan Kiszka a08d43677f Revert "Introduce reset notifier order"
This reverts commit 8217606e6e (and
updates later added users of qemu_register_reset), we solved the
problem it originally addressed less invasively.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 14:18:08 -05:00
Avi Kivity 1eed09cb4a Remove io_index argument from cpu_register_io_memory()
The parameter is always zero except when registering the three internal
io regions (ROM, unassigned, notdirty).  Remove the parameter to reduce
the API's power, thus facilitating future change.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:37 -05:00
Anthony Liguori 72716184aa Incorporate changes from v2 of Gleb's RTC reset patch
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-15 14:35:14 -05:00
Gleb Natapov eeb7c03c0f Add rtc reset function.
On reset:
Periodic Interrupt Enable (PIE) bit is cleared to zero
Alarm Interrupt Enable (AIE) bit is cleared to zero
Update ended Interrupt Flag (UF) bit is cleared to zero
Interrupt Request status Flag (IRQF) bit is cleared to zero
Periodic Interrupt Flag (PF) bit is cleared to zero
Alarm Interrupt Flag (AF) bit is cleared to zero
Square Wave output Enable (SQWE) zero

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-14 21:50:09 -05:00
aliguori 93b665693d Change RTC time drift IRQ re-injection (Gleb Natapov)
Currently IRQ are reinjected as soon as they are acknowledged to
the RTC, but Windows sometimes do acknowledgement in a loop with
global interrupt disabled waiting for interrupt to be cleared and
it does not mask RTC vector in PIC/APIC while doing this. In such
situation interrupt injection always fails and RTC interrupt is never
cleared.

Instead of reinjecting coalesced IRQs on acknowledgement the patch below
reinjects them by accelerating RTC clock a bit. This way RTC interrupt
is not constantly raced after coalesced interrupt.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7231 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22 20:20:22 +00:00
pbrook a8b01dd87f Fix RTC breakage from r7031.
Signed-off-by: Paul Brook <paul@codesourcery.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7062 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-10 02:19:52 +00:00
aurel32 100d9891d6 mc146818: add square wave output support
This is necessary for es40 as the sqw output is directly connected to the
core chipset.

Signed-off-by: Tristan Gingold <gingold@adacore.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7031 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-07 22:28:50 +00:00
aliguori 487414f1cb hw: remove error handling from qemu_malloc() callers (Avi Kivity)
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-05 22:06:05 +00:00
aurel32 42fc73a1ce Support epoch of 1980 in RTC emulation for MIPS Magnum
On the MIPS Magnum, the time that is held in the RTC's NVRAM should be
relative to midnight on 1980-01-01.  This patch adds an extra parameter
to rtc_init(), allowing different epochs to be used.  For the Magnum,
1980 is specified, and for all other machines, 2000 is specified.

I've not modified the handling of the century byte, as with an epoch of
1980 and a year of 2009, one could argue that it should hold either
0, 1, 19 or 20.  NT 3.50 on MIPS does not read the century byte.

Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6429 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-24 18:06:21 +00:00
aliguori 73822ec806 Add -rtc-td-hack option to fix time drift with RTC on Windows (Gleb Natapov)
After my last patch to fix interrupt coalescing was rejected
on the basis that it is too intrusive we decided to make the
fix much more localized and only fix the problem for RTC time
source. Unfortunately it is impossible to fix the problem entirely
inside RTC code like Andrzej proposed since Windows reads RTC
register C more then once on each time interrupt so it is impossible
to count reliably how many interrupt windows actually handled.
Proposed solution is localized to I386 target and is disabled by
default. To enable it "-rtc-td-hack" flag should be used.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6320 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-15 20:11:34 +00:00
aurel32 6f1bf24d1b Fix day of week in mc146818
According to mc146818 specification, Day of Week register (#6) is between 1
and 7, 1 representing Sunday. According C specification, tm_wday field in
struct tm is between 0 and 6, 0 representing Sunday.

Bit 2 of register B (#11) is named DM (data mode) and specifies if RTC
stores values in BCD or in binary form.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6310 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-14 21:09:07 +00:00
aurel32 c50c2d6847 Remove trailing spaces introduced by commit 6081
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6085 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-18 22:42:43 +00:00
aliguori 16b29ae180 Add HPET emulation to qemu (Beth Kon)
This patch adds HPET emulation.  It can be disabled with -disable-hpet.  An hpet
provides a more finely granular clocksource than otherwise available on PC.
This means that latency-dependent applications (e.g. multimedia) will generally
be smoother when using the HPET.

Signed-off-by: Beth Kon <eak@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6081 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-17 23:28:44 +00:00
pbrook 8da3ff1809 Change MMIO callbacks to use offsets, not absolute addresses.
Signed-off-by: Paul Brook <paul@codesourcery.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5849 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-01 18:59:50 +00:00
balrog f650305967 Unify RTCs that use host time, fix M48t59 alarm.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3984 c046a42c-6fe2-441c-8c8c-71466251a162
2008-02-17 11:42:19 +00:00
ths bee8d6842d qemu_put signedness fixes, by Andre Przywara.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3824 c046a42c-6fe2-441c-8c8c-71466251a162
2007-12-16 23:41:11 +00:00
pbrook 9596ebb701 Add statics and missing #includes for prototypes.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3683 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-18 01:44:38 +00:00
pbrook 87ecb68bdf Break up vl.h.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17 17:14:51 +00:00
bellard 7e0af5d097 added -startdate option
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3540 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-07 16:24:33 +00:00
ths 3b46e62427 find -type f | xargs sed -i 's/[\t ]*$//g' # Yes, again. Note the star in the regex.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3177 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-17 08:09:54 +00:00
ths 5fafdf24ef find -type f | xargs sed -i 's/[\t ]$//g' # on most files
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16 21:08:06 +00:00
ths 18c6e2ff5a Fix mmapped register alignment and endianness handling.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2694 c046a42c-6fe2-441c-8c8c-71466251a162
2007-04-17 16:28:29 +00:00