Honour float_muladd_negate_c in the case where the product is zero and
c is nonzero. Previously we would fail to negate c.
Seen in (and tested against) the gfortran testsuite on MIPS.
Signed-off-by: Richard Sandiford <rdsandiford@googlemail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The interface to normalizeRoundAndPackFloat64 requires that the
high bit be clear. Perform one shift-right-and-jam if needed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add a pickNaNMulAdd function for MIPS, implementing NaN propagation
rules for MIPS fused multiply-add instructions.
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The uint64_to_float32() conversion function was incorrectly always
returning numbers with the sign bit set (ie negative numbers). Correct
this so we return positive numbers instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In float16_to_float32, when returning an infinity, just pass zero
as the mantissa argument to packFloat32(), rather than shifting
a value which we know must be zero.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
NaN propagation rule: leftmost NaN in the expression gets propagated to
the result.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Architectures that don't have signaling NaNs can define
NO_SIGNALING_NANS, it will make float*_is_quiet_nan return 1 for any NaN
and float*_is_signaling_nan always return 0.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Flags passed into float{32,64}_muladd are treated as bits; assign
independent bits to float_muladd_negate_* to allow precise control over
what gets negated in float{32,64}_muladd.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Based on the following Coccinelle patch:
@@
typedef int16, int_fast16_t;
@@
-int16
+int_fast16_t
Avoids a workaround for AIX.
Add typedef for pre-10 Solaris.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: malc <av1474@comtv.ru>
Cc: Ben Taylor <bentaylor.solx86@gmail.com>
Tested-by: Bernhard Walle <bernhard@bwalle.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Based on the following Coccinelle patch:
@@
typedef uint16, uint_fast16_t;
@@
-uint16
+uint_fast16_t
Fixes the build of the Cocoa frontend on Mac OS X and avoids a
workaround for AIX.
For pre-10 Solaris include osdep.h.
Reported-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
Reported-by: Rui Carmo <rui.carmo@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Juan Pineda <juan@logician.com>
Cc: malc <av1474@comtv.ru>
Cc: Ben Taylor <bentaylor.solx86@gmail.com>
Tested-by: Bernhard Walle <bernhard@bwalle.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
normalizeFloat{32,64}Subnormal() expect the exponent as int16, not int.
This went unnoticed since int16 and uint16 were both typedef'ed to int.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Bernhard Walle <bernhard@bwalle.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This change makes it compile and return the same value than the #undef one.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix code in roundAndPackInt32 that assumed that int32 was only
32 bits, by simply using int32_t instead. Fix the parallel bug
in roundAndPackInt64 as well, although that one is only theoretical
since it's unlikely that int64 will ever be more than 64 bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Code in the float64_to_int32_round_to_zero() function was assuming
that int32 would not be wider than 32 bits; this meant it might
not correctly detect the overflow case. We take the simple approach
of using int32_t. Also fix equivalent issues in the functions
for other float sizes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
C99 appears to consider compound literals as non-constants, and complains
when they are used in static initializers. Switch to ordinary initializer
syntax.
Signed-off-by: Avi Kivity <avi@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
Reported-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Implement fused multiply-add as a softfloat primitive. This implements
"a+b*c" as a single step without any intermediate rounding; it is
specified in IEEE 754-2008 and implemented in a number of CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Include config.h in softfloat.c, so that the target specific ifdefs in
softfloat-specialize.h are evaluated correctly. This was accidentally
broken in commit 789ec7ce2 when config-target.h was removed from
softfloat.h, and means that most targets will have been returning the
wrong results for calculations involving NaNs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Prepares for uint32 replacement.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Prepares for uint16 replacement.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Most definitions in softfloat.h are really target-independent, but the
file is not because it includes definitions of the default NaN values.
Change those to variables to allow including softfloat.h from files that
are not compiled per-target. By making them const, the compiler is
allowed to optimize them into softfloat functions that use them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
float*_is_zero_or_denormal() is available for float32, but not for
float64, floatx80 and float128. Fix that.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that softfloat-native is gone, there is no real point on not always
enabling floatx80 and float128 support.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove softfloat-native support, all targets are now using softfloat
instead.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a new float_flag_output_denormal which is set when the result
of a floating point operation would be denormal but is flushed to
zero because we are in flush_to_zero mode. This is necessary because
some architectures signal this condition as an underflow and others
signal it as an inexact result.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add float*_is_any_nan() functions to match the softfloat API.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
float*_scalbn() should be able to take a status parameter. Fix that.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
float*_scalnb() were not taking into account all cases. This patch fixes
some corner cases:
- NaN values in input were not properly propagated and the invalid flag
not correctly raised. Use propagateFloat*NaN() for that.
- NaN or infinite values in input of floatx80_scalnb() were not correctly
detected due to a typo.
- The sum of exponent and n could overflow, leading to strange results.
Additionally having int16 defined to int make that happening for a very
small range of values. Fix that by saturating n to the maximum exponent
range, and using an explicit wider type if needed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add floatx80_compare() and floatx80_compare_quiet() functions to match
the softfloat-native ones.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a pi constant for float32, float64, floatx80. It will be used by
target-i386 and later by the trigonometric functions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
With floatx80, the explicit bit is set for infinity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The floatx80 format uses an explicit bit that should be taken into account
when converting to and from commonNaN format.
When converting to commonNaN, the explicit bit should be removed if it is
a 1, and a default NaN should be used if it is 0.
When converting from commonNan, the explicit bit should be added.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Make clear for all comparison functions which ones trigger an exception
for all NaNs, and which one only for sNaNs.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
I am not a big fan of code moving, but having the signaling version in
the middle of quiet versions and vice versa doesn't make the code easy
to read.
This patch is a simple code move, basically swapping locations of
float*_eq and float*_eq_quiet.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
float*_eq_signaling functions have a different semantics than other
comparison functions. Fix that by renaming float*_quiet_signaling() into
float*_eq().
Note that it is purely mechanical, and the behaviour should be unchanged.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
float*_eq functions have a different semantics than other comparison
functions. Fix that by first renaming float*_quiet() into float*_eq_quiet().
Note that it is purely mechanical, and the behaviour should be unchanged.
That said it clearly highlight problems due to this different semantics,
they are fixed later in this patch series.
Cc: Alexander Graf <agraf@suse.de>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add float*_unordered_quiet() functions to march the softfloat versions.
As FPU status is not tracked with softfloat-native, they don't differ
from the signaling version.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add float*_unordered() functions to softfloat, matching the softfloat-native
ones. Also add float*_unordered_quiet() functions to match the others
comparison functions.
This allow target-i386/ops_sse.h to be compiled with softfloat.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Softfloat has its own implementation to count the leading zeros. However
a lot of architectures have either a dedicated instruction or an
optimized to do that. When using GCC >= 3.4, this patch uses GCC builtins
instead of the handcoded implementation.
Note that I amware that QEMU_GNUC_PREREQ is defined in osdep.h and that
clz32() and clz64() are defined in host-utils.h, but I think it is better
to keep the softfloat implementation self contained.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a setter function for the underflow tininess detection mode,
in line with the similar functions for other parts of the float status
structure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add min and max operations to softfloat. This allows us to implement
propagation of NaNs and handling of negative zero correctly (unlike
the approach of having target helper routines return one of the operands
based on the result of a comparison op).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
They are defined with the same semantics as the POSIX types,
so prefer those for consistency. Suggested by Peter Maydell.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The original SoftFloat 2.0b library avoided the use of custom integer types
in its public headers. This requires the definitions of int{8,16,32,64} to
match the assumptions in the declarations. This breaks on BeOS R5 and Haiku/x86,
where int32 is defined in {be,os}/support/SupportDefs.h in terms of a long
rather than an int. Spotted by Michael Lotz.
Since QEMU already breaks this distinction by defining those types just above,
do use them for consistency and to allow #ifndef'ing them out as done for
[u]int16 on AIX.
Cc: Michael Lotz <mmlr@mlotz.ch>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The SoftFloat license requires "prominent notice that the work
is derivative". Having added features like improved 16-bit support
for arm already, add such a notice to the sources.
softfloat-native.[ch] are not under the SoftFloat license
and thus are not changed.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
These constants and utility function are needed to implement some
helpers. Defining constants avoids the need to re-compute them at
runtime.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
