Additionally, REQUIRE_64BIT when L=1 to match what is specified in The
Programming Environments Manual:
"For 32-bit implementations, the L field must be cleared, otherwise the
instruction form is invalid."
Some CPUs are known to deviate from this specification by ignoring the
L bit [1]. The stricter behavior, however, can help users that test
software with qemu, making it more likely to detect bugs that would
otherwise be silent.
If deemed necessary, a future patch can adapt this behavior based on
the specific CPU model.
[1] The 601 manual is the only one I've found that explicitly states
that the L bit is ignored, but we also observe this behavior in a 7447A
v1.2.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-15-matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[dwg: Corrected whitespace error]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These are all connected by macros in the legacy decoding.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-9-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These are all connected by macros in the legacy decoding.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-7-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The illegal suffix behavior matches what was observed in a
POWER10 DD2.0 machine.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-6-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With prefixed instructions, the number of instructions
remaining until the page crossing is no longer constant.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-3-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These will be used by the decodetree trans_* functions
to early-exit when the instruction set is not enabled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-2-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The only difference in the code for Instruction fetch, Data load and
Data store TLB miss errors is that when called from an unsupported
processor (i.e. not one of 602, 603, 603e, G2, 7x5 or 74xx), they
abort with a message specific to the operation type (insn fetch, data
load/store).
If a processor does not support those interrupts we should not be
registering them in init_excp_<proc> to begin with, so that error
message would never be used.
I'm leaving the message in for completeness, but making it generic and
consolidating the three interrupts into the same case statement body.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20210601214649.785647-4-farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function is identical to dump_syscall, so use the latter for
system call vectored as well.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20210601214649.785647-3-farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Followed the suggested overhaul to store_fpscr logic, and moved it to
cpu.c where it can be accessed in !TCG builds.
The overhaul was suggested because storing a value to fpscr should
never raise an exception, so we could remove all the mess that happened
with POWERPC_EXCP_FP.
We also moved fpscr_set_rounding_mode into cpu.c as it could now be moved
there, and it is needed when a value for the fpscr is being stored
directly.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210527163522.23019-1-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This feature will no longer be useful as ppc moves to using decodetree
for TCG. And building with it enabled is no longer possible, due to
changes in opc_handler_t. Since the last commit that mentions it
happened in 2014, I think it is safe to remove it.
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210531145629.21300-5-bruno.larsen@eldorado.org.br>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
since both, PPC_DO_STATISTICS and PPC_DUMP_CPU, are obsoleted as
target/ppc moves to decodetree, we can remove this ifdef based decision
tree, and only have what is now the standard option for the macro.
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210531145629.21300-4-bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Documented the removal of the HMP command info cpustats
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210531145629.21300-3-bruno.larsen@eldorado.org.br>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Lucas Mateus <lucas.araujo@eldorado.org.br>
Reviewed-by: Greg Kurz <groug@kaod.org>
[dwg: Fix a Sphinx formatting error]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
No more architectures set the pointer to dump_statistics, so there's no
point in keeping it, or the related cpu_dump_statistics function.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210526202104.127910-6-bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210531145629.21300-2-bruno.larsen@eldorado.org.br>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU is failing to launch a CGS pSeries guest in a host that has PEF
support:
qemu-system-ppc64: ../softmmu/vl.c:2585: qemu_machine_creation_done: Assertion `machine->cgs->ready' failed.
Aborted
This is happening because we're not setting the cgs->ready flag that is
asserted in qemu_machine_creation_done() during machine start.
cgs->ready is set in s390_pv_kvm_init() and sev_kvm_init(). Let's set it
in kvmppc_svm_init() as well.
Reported-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210528201619.52363-1-danielhb413@gmail.com>
Acked-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since ppc was the last architecture to collect these statistics and
it is currently phasing this collection out, the command that would query
this information is being removed.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210526202104.127910-5-bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Removed the commented out definition and all ifdefs relating to
PPC_DUMP_STATISTICS, as it's hardly ever used.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210526202104.127910-4-bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function requires surce code modification to be useful, which means
it probably is not used often, and the move to using decodetree means
the statistics won't even be collected anymore.
Also removed setting dump_statistics in ppc_cpu_realize, since it was
only useful when in conjunction with ppc_cpu_dump_statistics.
Suggested-by: Richard Henderson<richard.henderson@linaro.org>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210526202104.127910-3-bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
updated build file to not compile some sources that are unnecessary if
TCG is disabled on the system.
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210525115355.8254-5-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Created a file with stubs needed to compile disabling TCG. *_ppc_opcodes
were created to make cpu_init.c have a few less ifdefs, since they are
not needed. softmmu_resize_hpt_* have to be created because the compiler
can't automatically know they aren't used, but they should never be
reached.
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210525115355.8254-4-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
excp_helper.c, mmu-hash64.c and mmu_helper.c have some function
declarations that are TCG-only, and couldn't be easily moved to a
TCG only file, so ifdefs were added around them.
We also needed ifdefs around some header files because helper-proto.h
includes trace/generated-helpers.h, which is never created when building
without TCG, and cpu_ldst.h includes tcg/tcg.h, whose containing folder
is not included as a -iquote. As future cleanup, we could change the
part of the configuration script to add those.
cpu_init.c also had a callback definition that is TCG only and could be
removed as part of a future cleanup (all the dump_statistics part is
almost never used and will become obsolete as we transition to using
decodetree).
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210525115355.8254-3-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The write calback decision when registering the MAS SPR has been turned
into a ternary operation, rather than an if-then-else block.
This was done because when building without TCG, even though the
compiler will optimize away the pointers to spr_write_generic*, it
doesn't optimize away the decision and assignment to the local pointer,
creating compiler errors. This cleanup looked better than using ifdefs,
so we decided to with it.
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210525115355.8254-2-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
TCG does not keep track of AIL mode in a central place, it's based on
the current LPCR[AIL] bits. Synchronize the new CPU's LPCR to the
current LPCR in rtas_start_cpu(), similarly to the way the ILE bit is
synchronized.
Open-code the ILE setting as well now that the caller's LPCR is
available directly, there is no need for the indirection.
Without this, under both TCG and KVM, adding a POWER8/9/10 class CPU
with a new core ID after a modern Linux has booted results in the new
CPU's LPCR missing the LPCR[AIL]=0b11 setting that the other CPUs have.
This can cause crashes and unexpected behaviour.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20210526091626.3388262-3-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 47a9b55154 ("spapr: Clean up handling of LPCR power-saving exit
bits") moved this logic but did not remove the comment from the
previous location.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20210526091626.3388262-2-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ppc_store_ptcr, defined in mmu_helper.c, was only used by
helper_store_ptcr, in misc_helper.c. To avoid possible confusion,
the function was folded into the helper.
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210526143516.125582-1-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The FDT code is adding the pmem root node by name "persistent-memory"
which should have been "ibm,persistent-memory".
The linux fetches the device tree nodes by type and it has been working
correctly as the type is correct. If someone searches by its intended
name it would fail, so fix that.
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-Id: <162204278956.219.9061511386011411578.stgit@cc493db1e665>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The subsequent patches add definitions which tend to get
the compilation to cyclic dependency. So, prepare with
forward declarations, move the definitions and clean up.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-Id: <162133925415.610.11584121797866216417.stgit@4f1e6f2bd33e>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With upstream kernel, especially after commit 98ba956f6a389
("powerpc/pseries/eeh: Rework device EEH PE determination") we see that KVM
guest isn't able to enable EEH option for PCI pass-through devices anymore.
[root@atest-guest ~]# dmesg | grep EEH
[ 0.032337] EEH: pSeries platform initialized
[ 0.298207] EEH: No capable adapters found: recovery disabled.
[root@atest-guest ~]#
So far the linux kernel was assuming pe_config_addr equal to device's
config_addr and using it to enable EEH on the PE through ibm,set-eeh-option
RTAS call. Which wasn't the correct way as per PAPR. The linux kernel
commit 98ba956f6a389 fixed this flow. With that fixed, linux now uses PE
config address returned by ibm,get-config-addr-info2 RTAS call to enable
EEH option per-PE basis instead of per-device basis. However this has
uncovered a bug in qemu where ibm,set-eeh-option is treating PE config
address as per-device config address.
Hence in qemu guest with recent kernel the ibm,set-eeh-option RTAS call
fails with -3 return value indicating that there is no PCI device exist for
the specified PE config address. The rtas_ibm_set_eeh_option call uses
pci_find_device() to get the PC device that matches specific bus and devfn
extracted from PE config address passed as argument. Thus it tries to map
the PE config address to a single specific PCI device 'bus->devices[devfn]'
which always results into checking device on slot 0 'bus->devices[0]'.
This succeeds when there is a pass-through device (vfio-pci) present on
slot 0. But in cases where there is no pass-through device present in slot
0, but present in non-zero slots, ibm,set-eeh-option call fails to enable
the EEH capability.
hw/ppc/spapr_pci_vfio.c: spapr_phb_vfio_eeh_set_option()
case RTAS_EEH_ENABLE: {
PCIHostState *phb;
PCIDevice *pdev;
/*
* The EEH functionality is enabled on basis of PCI device,
* instead of PE. We need check the validity of the PCI
* device address.
*/
phb = PCI_HOST_BRIDGE(sphb);
pdev = pci_find_device(phb->bus,
(addr >> 16) & 0xFF, (addr >> 8) & 0xFF);
if (!pdev || !object_dynamic_cast(OBJECT(pdev), "vfio-pci")) {
return RTAS_OUT_PARAM_ERROR;
}
hw/pci/pci.c:pci_find_device()
PCIDevice *pci_find_device(PCIBus *bus, int bus_num, uint8_t devfn)
{
bus = pci_find_bus_nr(bus, bus_num);
if (!bus)
return NULL;
return bus->devices[devfn];
}
This patch fixes ibm,set-eeh-option to check for presence of any PCI device
(vfio-pci) under specified bus and enable the EEH if found. The current
code already makes sure that all the devices on that bus are from same
iommu group (within same PE) and fail very early if it does not.
After this fix guest is able to find EEH capable devices and enable EEH
recovery on it.
[root@atest-guest ~]# dmesg | grep EEH
[ 0.048139] EEH: pSeries platform initialized
[ 0.405115] EEH: Capable adapter found: recovery enabled.
[root@atest-guest ~]#
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Message-Id: <162158429107.145117.5843504911924013125.stgit@jupiter>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU 6.0 moved all the -boot variables to the machine. Especially, the
removal of the boot_order static changed the handling of '-boot once'
from:
if (boot_once) {
qemu_boot_set(boot_once, &error_fatal);
qemu_register_reset(restore_boot_order, g_strdup(boot_order));
}
to
if (current_machine->boot_once) {
qemu_boot_set(current_machine->boot_once, &error_fatal);
qemu_register_reset(restore_boot_order,
g_strdup(current_machine->boot_order));
}
This means that we now register as subsequent boot order a copy
of current_machine->boot_once that was just set with the previous
call to qemu_boot_set(), i.e. we never transition away from the
once boot order.
It is certainly fragile^Wwrong for the spapr code to hijack a
field of the base machine type object like that. The boot order
rework simply turned this software boundary violation into an
actual bug.
Have the spapr code to handle that with its own field in
SpaprMachineState. Also kfree() the initial boot device
string when "once" was used.
Fixes: 4b7acd2ac8 ("vl: clean up -boot variables")
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1960119
Cc: pbonzini@redhat.com
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210521160735.1901914-1-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These files included helper-proto.h, but didn't use or declare any
helpers, so the #include has been removed
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210521201759.85475-6-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It is preferable to store the current rounding mode and retore from that
than recalculating from fpscr, so we changed the behavior of do_fri and
VSX_ROUND to do it like that.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210521201759.85475-4-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These functions are used in hw/ppc logic, during machine startup, which
means it must be compiled when --disable-tcg is selected, and so it has
been moved into a common code file
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210521201759.85475-3-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Changed how the function ppc_store_sdr1, from error_report(...) to
qemu_log_mask(LOG_GUEST_ERROR, ...).
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210521201759.85475-2-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Bump minimum versions of some requirements after removing CentOS 7 support
-----BEGIN PGP SIGNATURE-----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=RAkI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-06-02' into staging
* Update the references to some doc files (use *.rst instead of *.txt)
* Bump minimum versions of some requirements after removing CentOS 7 support
# gpg: Signature made Wed 02 Jun 2021 08:12:18 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2021-06-02:
configure: bump min required CLang to 6.0 / XCode 10.0
configure: bump min required GCC to 7.5.0
configure: bump min required glib version to 2.56
tests/docker: drop CentOS 7 container
tests/vm: convert centos VM recipe to CentOS 8
crypto: drop used conditional check
crypto: bump min gnutls to 3.5.18, dropping RHEL-7 support
crypto: bump min gcrypt to 1.8.0, dropping RHEL-7 support
crypto: drop back compatibility typedefs for nettle
crypto: bump min nettle to 3.4, dropping RHEL-7 support
patchew: move quick build job from CentOS 7 to CentOS 8 container
block/ssh: Bump minimum libssh version to 0.8.7
docs: fix references to docs/devel/s390-dasd-ipl.rst
docs: fix references to docs/specs/tpm.rst
docs: fix references to docs/devel/build-system.rst
docs: fix references to docs/devel/atomics.rst
docs: fix references to docs/devel/tracing.rst
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Several distros have been dropped since the last time we bumped the
minimum required CLang version.
Per repology, currently shipping versions are:
RHEL-8: 10.0.1
Debian Buster: 7.0.1
openSUSE Leap 15.2: 9.0.1
Ubuntu LTS 18.04: 6.0.0
Ubuntu LTS 20.04: 10.0.0
FreeBSD 12: 8.0.1
Fedora 33: 11.0.0
Fedora 34: 11.1.0
With this list Ubuntu LTS 18.04 is the constraint at 6.0.0
An LLVM version of 6.0.0 corresponds to macOS XCode version of 10.0
which dates from Sept 2018.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-13-berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Several distros have been dropped since the last time we bumped the
minimum required GCC version.
Per repology, currently shipping versions are:
RHEL-8: 8.3.1
Debian Buster: 8.3.0
openSUSE Leap 15.2: 7.5.0
Ubuntu LTS 18.04: 7.5.0
Ubuntu LTS 20.04: 9.3.0
FreeBSD: 10.3.0
Fedora 33: 9.2.0
Fedora 34: 11.0.1
OpenBSD: 8.4.0
macOS HomeBrew: 11.1.0
With this list Ubuntu LTS 18.04 / openSUSE Leap 15.2 are the
constraint at 7.5.0
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-12-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The glib version was not previously constrained by RHEL-7 since it
rebases fairly often. Instead SLES 12 and Ubuntu 16.04 were the
constraints in 00f2cfbbec. Both of
these are old enough that they are outside our platform support
matrix now.
Per repology, current shipping versions are:
RHEL-8: 2.56.4
Debian Buster: 2.58.3
openSUSE Leap 15.2: 2.62.6
Ubuntu LTS 18.04: 2.56.4
Ubuntu LTS 20.04: 2.64.6
FreeBSD: 2.66.7
Fedora 33: 2.66.8
Fedora 34: 2.68.1
OpenBSD: 2.68.1
macOS HomeBrew: 2.68.1
Thus Ubuntu LTS 18.04 / RHEL-8 are the constraint for GLib version
at 2.56
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-11-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-10-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-9-berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The condition being tested has never been set since the day the code was
first introduced.
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-8-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. This lets us increment the minimum required gnutls version
Per repology, current shipping versions are:
RHEL-8: 3.6.14
Debian Buster: 3.6.7
openSUSE Leap 15.2: 3.6.7
Ubuntu LTS 18.04: 3.5.18
Ubuntu LTS 20.04: 3.6.13
FreeBSD: 3.6.15
Fedora 33: 3.6.16
Fedora 34: 3.7.1
OpenBSD: 3.6.15
macOS HomeBrew: 3.6.15
Ubuntu LTS 18.04 has the oldest version and so 3.5.18 is the new minimum.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-7-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
[thuth: rebased to use .gitlab-ci.d/buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
