It'll be reused later by the vga optimization.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5791 c046a42c-6fe2-441c-8c8c-71466251a162
unsigned long is too bad of a type. Use ram_addr_t instead.
aligurori: fixed a compile warning in this patch
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5790 c046a42c-6fe2-441c-8c8c-71466251a162
Write env->access_type before a load/store operation instead of relying
on the name of the dyngen operation.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5785 c046a42c-6fe2-441c-8c8c-71466251a162
Including a few bug fixes:
- Don't clear high part for instruction with 32-bit destination
- Fix efscmp* and etstcmp* return value
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5783 c046a42c-6fe2-441c-8c8c-71466251a162
- adapt configure to link against -lrt to fix aio linking errors
- adapt configure to link against -lossaudio to fix oss linking errors
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5776 c046a42c-6fe2-441c-8c8c-71466251a162
When loading/storing a register pair, the even-numbered register
always maps to the low 32 bits of memory independently of target
endian configuration.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5773 c046a42c-6fe2-441c-8c8c-71466251a162
Based on a patch from Vladimir Prus and comments from Shin-ichiro KAWASAKI.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5770 c046a42c-6fe2-441c-8c8c-71466251a162
This patches makes SH serial emulation use qemu_irq in its interface.
* hw/sh.h (sh_serial_init): Take qemu_irq, not intc_source.
* hw/sh7750.c (sh7750_init): Adjust.
* hw/sh_intc.c (sh_intc_set_irq): Don't assert or deassert
irq more than once.
* hw/sh_serial.c (sh_serial_state): Use qemu_irq, not intc_source.
(sh_serial_clear_fifo, sh_serial_ioport_write)
(sh_serial_receive_byte): Adjust.
(sh_serial_init): Take qemu_irq, not intc_source.
(Vladimir Prus)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5769 c046a42c-6fe2-441c-8c8c-71466251a162
Remove unused file, reported by Laurent Desnogues.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5767 c046a42c-6fe2-441c-8c8c-71466251a162
We're currently ignoring the e1000 VLAN tagging, stripping and filtering
features in the e1000 emulation. This patch adds backing for the
relevant registers and provides a software implementation of the
acceleration, such that a guest can make use of VLANs.
This is mostly (only?) useful for a guest on a bridge (not user mode
networking). The only caveat beyond that is that you need to make sure
the host NIC isn't doing it's own tagging, stripping, or filtering.
This generally means the host NIC on the bridge should not be part of a
VLAN.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5766 c046a42c-6fe2-441c-8c8c-71466251a162
Loading other image types (e.g. IH_TYPE_MULTI, IH_TYPE_FLATDT) is not
implemented.
IH_TYPE_STANDALONE images could be loaded, but would unexpectedly fail if they
tried to use any uboot services.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5765 c046a42c-6fe2-441c-8c8c-71466251a162
u-boot is a firmware. uImage is an executable file format.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5764 c046a42c-6fe2-441c-8c8c-71466251a162
Return the base address at which the image was loaded so that callers may keep
track of currently occupied guest memory.
This will be required by the PPC 440 embedded code to avoid hard coding a
device model/initrd location. Other users of this function could make use of
this parameter to avoid hard coding these locations in the future too.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5763 c046a42c-6fe2-441c-8c8c-71466251a162
Based on gzip uImage loading code from u-boot.
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5762 c046a42c-6fe2-441c-8c8c-71466251a162
TARGET_FMT_plx includes a % for you. This fixes the following warning when
compiling with LSI_DEBUG enabled.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5760 c046a42c-6fe2-441c-8c8c-71466251a162
fldi0/fldi1 should be executed as a nop if FPSCR.FR is set instead of
generating an exception. Reported by Laurent Desnogues.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5759 c046a42c-6fe2-441c-8c8c-71466251a162
struct kvm_userspace_memory_region does not use QEMU friendly types to
define memory slots. This results in lots of ugly casting with warnings
on 32-bit platforms.
This patch introduces a proper KVMSlot structure that uses QEMU types to
describe memory slots. This eliminates many of the casts and isolates
the type conversions to one spot.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5755 c046a42c-6fe2-441c-8c8c-71466251a162
Besides unassigned memory, we also don't care about MMIO.
So if we're giving an MMIO area that is already registered,
wipe it out.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5753 c046a42c-6fe2-441c-8c8c-71466251a162
This patch tweaks the ATAPI CDROM emulation to fix an annoyance seen
when running a variety of Linux guests: the desktop GUI shows a CDROM
device as present, but is unable to automount the media and display its
contents.
The patch adds the PLAY_AUDIO capability bit to the data returned by
MODE_SENSE commands. That convinces the guest kernel to determine what
kind of media is present.
Arguably Linux could be smarter about this, but it's my guess there are
few (if any) hardware CDROM drives that don't set the bit, and there are
a large number of Linux distros that exhibit this problem.
Signed-off-by: Gary Grebus <ggrebus@virtualiron.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5752 c046a42c-6fe2-441c-8c8c-71466251a162
This patch fixes Linux machines configured with > 4G of ram and using a
SCSI device.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5750 c046a42c-6fe2-441c-8c8c-71466251a162
ENOBUFS is not defined on Win32. Use ENOMEM instead which is more portable.
This was reported by Hervé Poussineau.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5749 c046a42c-6fe2-441c-8c8c-71466251a162
As the debug registers are no longer dummies, let's include their
current state into the 'info registers' output and other register dumps.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5748 c046a42c-6fe2-441c-8c8c-71466251a162
Built on top of previously enhanced breakpoint/watchpoint support, this
patch adds full debug register emulation for the x86 architecture.
Many corner cases were considered, and the result was successfully
tested inside a Linux guest with gdb, but I won't be surprised if one
or two scenarios still behave differently in reality.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5747 c046a42c-6fe2-441c-8c8c-71466251a162
Add another breakpoint/watchpoint type to BP_GDB: BP_CPU. This type is
intended for hardware-assisted break/watchpoint emulations like the x86
architecture requires.
To keep the highest priority for BP_GDB breakpoints, this type is
always inserted at the head of break/watchpoint lists, thus is found
first when looking up the origin of a debug interruption.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5746 c046a42c-6fe2-441c-8c8c-71466251a162
This patch allows to hook into the delivery of EXCP_DEBUG so that other
use beyond guest debugging becomes possible.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5745 c046a42c-6fe2-441c-8c8c-71466251a162
When one watchpoint is hit, others might have triggered as well. To
support users of the watchpoint API which need to detect such cases,
the BP_WATCHPOINT_HIT flag is introduced and maintained.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5744 c046a42c-6fe2-441c-8c8c-71466251a162
This patch enhances QEMU's built-in debugger for SMP guest debugging.
Using the thread support of the gdb remote protocol, each VCPU is mapped
on a pseudo thread and exposed to the gdb frontend. This way you can
easy switch the focus of gdb between the VCPUs and observe their states.
On breakpoint hit, the focus is automatically adjusted just as for
normal multi-threaded application under gdb control.
Furthermore, the patch propagates breakpoint and watchpoint insertions
or removals to all CPUs, not just the current one as it was the case so
far. Without this, SMP guest debugging was practically unfeasible.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5743 c046a42c-6fe2-441c-8c8c-71466251a162
Now that we can properly restore the pc on watchpoint hits, there is no
more need for prematurely terminating TBs if watchpoints are present.
Remove all related bits.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5742 c046a42c-6fe2-441c-8c8c-71466251a162