CXL emulation of interleave requires read and write hooks due to
requirement for subpage granularity. The Linux kernel stack now enables
using this memory as conventional memory in a separate NUMA node. If a
process is deliberately forced to run from that node
$ numactl --membind=1 ls
the page table walk on i386 fails.
Useful part of backtrace:
(cpu=cpu@entry=0x555556fd9000, fmt=fmt@entry=0x555555fe3378 "cpu_io_recompile: could not find TB for pc=%p")
at ../../cpu-target.c:359
(retaddr=0, addr=19595792376, attrs=..., xlat=<optimized out>, cpu=0x555556fd9000, out_offset=<synthetic pointer>)
at ../../accel/tcg/cputlb.c:1339
(cpu=0x555556fd9000, full=0x7fffee0d96e0, ret_be=ret_be@entry=0, addr=19595792376, size=size@entry=8, mmu_idx=4, type=MMU_DATA_LOAD, ra=0) at ../../accel/tcg/cputlb.c:2030
(cpu=cpu@entry=0x555556fd9000, p=p@entry=0x7ffff56fddc0, mmu_idx=<optimized out>, type=type@entry=MMU_DATA_LOAD, memop=<optimized out>, ra=ra@entry=0) at ../../accel/tcg/cputlb.c:2356
(cpu=cpu@entry=0x555556fd9000, addr=addr@entry=19595792376, oi=oi@entry=52, ra=ra@entry=0, access_type=access_type@entry=MMU_DATA_LOAD) at ../../accel/tcg/cputlb.c:2439
at ../../accel/tcg/ldst_common.c.inc:301
at ../../target/i386/tcg/sysemu/excp_helper.c:173
(err=0x7ffff56fdf80, out=0x7ffff56fdf70, mmu_idx=0, access_type=MMU_INST_FETCH, addr=18446744072116178925, env=0x555556fdb7c0)
at ../../target/i386/tcg/sysemu/excp_helper.c:578
(cs=0x555556fd9000, addr=18446744072116178925, size=<optimized out>, access_type=MMU_INST_FETCH, mmu_idx=0, probe=<optimized out>, retaddr=0) at ../../target/i386/tcg/sysemu/excp_helper.c:604
Avoid this by plumbing the address all the way down from
x86_cpu_tlb_fill() where is available as retaddr to the actual accessors
which provide it to probe_access_full() which already handles MMIO accesses.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2180
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2220
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20240307155304.31241-2-Jonathan.Cameron@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Otherwise TCG would assume the register that holds t1 would be constant
and reuse whenever it needs the value within it.
Cc: qemu-stable@nongnu.org
Fixes: f1ea739bd5 ("target/s390x: Use tcg_constant_* in local contexts")
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[iii: Adjust a newline and capitalization, add tags]
Signed-off-by: Ido Plat <ido.plat@ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20240318202722.20675-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZf1WZgAKCRBAov/yOSY+
35zZBADDPLM3130Q/2zsGhol1C538i4+hYRbrX+OsLnlaldyE3NqCPcgaKwVE3xS
T9aOln91rDyQedz4DVYYSx+Oa1JpRjGko957REmopL50SJOYi6n7YhHJksaUirjJ
tMDZdPClOegieOpCu8LgJAVhaxTpZvfLedJVPt7O6Fl/uP3pLg==
=XLqh
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240322' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240322
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZf1WZgAKCRBAov/yOSY+
# 35zZBADDPLM3130Q/2zsGhol1C538i4+hYRbrX+OsLnlaldyE3NqCPcgaKwVE3xS
# T9aOln91rDyQedz4DVYYSx+Oa1JpRjGko957REmopL50SJOYi6n7YhHJksaUirjJ
# tMDZdPClOegieOpCu8LgJAVhaxTpZvfLedJVPt7O6Fl/uP3pLg==
# =XLqh
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 22 Mar 2024 09:59:02 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240322' of https://gitlab.com/gaosong/qemu:
target/loongarch: Fix qemu-system-loongarch64 assert failed with the option '-d int'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu-system-loongarch64 assert failed with the option '-d int',
the helper_idle() raise an exception EXCP_HLT, but the exception name is undefined.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240321123606.1704900-1-gaosong@loongson.cn>
The timebase-frequency of guest OS should be the same with host
machine. The timebase-frequency value in DTS should be got from
hypervisor when using KVM acceleration.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Message-ID: <20240314061510.9800-1-yongxuan.wang@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Need to convert mmu_idx to privilege mode for PMP function.
Signed-off-by: Irina Ryapolova <irina.ryapolova@syntacore.com>
Fixes: b297129ae1 ("target/riscv: propagate PMP permission to TLB page")
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240320172828.23965-1-irina.ryapolova@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to the Zvfbfmin definition in the RISC-V BF16 extensions spec,
the Zvfbfmin extension only requires either the V extension or the
Zve32f extension.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240321170929.1162507-1-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Change the for loops in ldst helpers to do a single increment in the
counter, and assign it env->vstart, to avoid re-reading from vstart
every time.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240314175704.478276-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The vstart_eq_zero flag is updated at the beginning of the translation
phase from the env->vstart variable. During the execution phase all
functions will set env->vstart = 0 after a successful execution, but the
vstart_eq_zero flag remains the same as at the start of the block. This
will wrongly cause SIGILLs in translations that requires env->vstart = 0
and might be reading vstart_eq_zero = false.
This patch adds a new finalize_rvv_inst() helper that is called at the
end of each vector instruction that will both update vstart_eq_zero and
do a mark_vs_dirty().
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1976
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240314175704.478276-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
trans_vmv_v_i , trans_vfmv_v_f and the trans_##NAME macro from
GEN_VMV_WHOLE_TRANS() are calling mark_vs_dirty() in both branches of
their 'ifs'. conditionals.
Call it just once in the end like other functions are doing.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240314175704.478276-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All helpers that rely on vstart >= vl are now doing early exits using
the VSTART_CHECK_EARLY_EXIT() macro. This macro will not only exit the
helper but also clear vstart.
We're still left with brconds that are skipping the helper, which is the
only place where we're clearing vstart. The pattern goes like this:
tcg_gen_brcond_tl(TCG_COND_GEU, cpu_vstart, cpu_vl, over);
(... calls helper that clears vstart ...)
gen_set_label(over);
return true;
This means that every time we jump to 'over' we're not clearing vstart,
which is an oversight that we're doing across the board.
Instead of setting vstart = 0 manually after each 'over' jump, remove
those brconds that are skipping helpers. The exception will be
trans_vmv_s_x() and trans_vfmv_s_f(): they don't use a helper and are
already clearing vstart manually in the 'over' label.
While we're at it, remove the (vl == 0) brconds from trans_rvbf16.c.inc
too since they're unneeded.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240314175704.478276-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're going to make changes that will required each helper to be
responsible for the 'vstart' management, i.e. we will relieve the
'vstart < vl' assumption that helpers have today.
Helpers are usually able to deal with vstart >= vl, i.e. doing nothing
aside from setting vstart = 0 at the end, but the tail update functions
will update the tail regardless of vstart being valid or not. Unifying
the tail update process in a single function that would handle the
vstart >= vl case isn't trivial (see [1] for more info).
This patch takes a blunt approach: do an early exit in every single
vector helper if vstart >= vl, unless the helper is guarded with
vstart_eq_zero in the translation. For those cases the helper is ready
to deal with cases where vl might be zero, i.e. throwing exceptions
based on it like vcpop_m() and first_m().
Helpers that weren't changed:
- vcpop_m(), vfirst_m(), vmsetm(), GEN_VEXT_VIOTA_M(): these are guarded
directly with vstart_eq_zero;
- GEN_VEXT_VCOMPRESS_VM(): guarded with vcompress_vm_check() that checks
vstart_eq_zero;
- GEN_VEXT_RED(): guarded with either reduction_check() or
reduction_widen_check(), both check vstart_eq_zero;
- GEN_VEXT_FRED(): guarded with either freduction_check() or
freduction_widen_check(), both check vstart_eq_zero.
Another exception is vext_ldst_whole(), who operates on effective vector
length regardless of the current settings in vtype and vl.
[1] https://lore.kernel.org/qemu-riscv/1590234b-0291-432a-a0fa-c5a6876097bc@linux.alibaba.com/
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240314175704.478276-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 8ff8ac6329 added a conditional to guard the vext_ldst_whole()
helper if vstart >= evl. But by skipping the helper we're also not
setting vstart = 0 at the end of the insns, which is incorrect.
We'll move the conditional to vext_ldst_whole(), following in line with
the removal of all brconds vstart >= vl that the next patch will do. The
idea is to make the helpers responsible for their own vstart management.
Fix ldst_whole isns by:
- remove the brcond that skips the helper if vstart is >= evl;
- vext_ldst_whole() now does an early exit with the same check, where
evl = (vlenb * nf) >> log2_esz, but the early exit will also clear
vstart.
The 'width' param is now unneeded in ldst_whole_trans() and is also
removed. It was used for the evl calculation for the brcond and has no
other use now. The 'width' is reflected in vext_ldst_whole() via
log2_esz, which is encoded by GEN_VEXT_LD_WHOLE() as
"ctzl(sizeof(ETYPE))".
Suggested-by: Max Chou <max.chou@sifive.com>
Fixes: 8ff8ac6329 ("target/riscv: rvv: Add missing early exit condition for whole register load/store")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Message-ID: <20240314175704.478276-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
These insns have 2 paths: we'll either have vstart already cleared if
vstart_eq_zero or we'll do a brcond to check if vstart >= maxsz to call
the 'vmvr_v' helper. The helper will clear vstart if it executes until
the end, or if vstart >= vl.
For starters, the check itself is wrong: we're checking vstart >= maxsz,
when in fact we should use vstart in bytes, or 'startb' like 'vmvr_v' is
calling, to do the comparison. But even after fixing the comparison we'll
still need to clear vstart in the end, which isn't happening too.
We want to make the helpers responsible to manage vstart, including
these corner cases, precisely to avoid these situations:
- remove the wrong vstart >= maxsz cond from the translation;
- add a 'startb >= maxsz' cond in 'vmvr_v', and clear vstart if that
happens.
This way we're now sure that vstart is being cleared in the end of the
execution, regardless of the path taken.
Fixes: f714361ed7 ("target/riscv: rvv-1.0: implement vstart CSR")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240314175704.478276-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
vmvr_v isn't handling the case where the host might be big endian and
the bytes to be copied aren't sequential.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Fixes: f714361ed7 ("target/riscv: rvv-1.0: implement vstart CSR")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240314175704.478276-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
trans_vmv_x_s, trans_vmv_s_x, trans_vfmv_f_s and trans_vfmv_s_f aren't
setting vstart = 0 after execution. This is usually done by a helper in
vector_helper.c but these functions don't use helpers.
We'll set vstart after any potential 'over' brconds, and that will also
mandate a mark_vs_dirty() too.
Fixes: dedc53cbc9 ("target/riscv: rvv-1.0: integer scalar move instructions")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240314175704.478276-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The helper isn't setting env->vstart = 0 after its execution, as it is
expected from every vector instruction that completes successfully.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20240314175704.478276-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 3b8022269c added the capability of named features/profile
extensions to be added in riscv,isa. To do that we had to assign priv
versions for each one of them in isa_edata_arr[]. But this resulted in a
side-effect: vendor CPUs that aren't running priv_version_latest started
to experience warnings for these profile extensions [1]:
| $ qemu-system-riscv32 -M sifive_e
| qemu-system-riscv32: warning: disabling zic64b extension for hart
0x00000000 because privilege spec version does not match
| qemu-system-riscv32: warning: disabling ziccamoa extension for
hart 0x00000000 because privilege spec version does not match
This is benign as far as the CPU behavior is concerned since disabling
both extensions is a no-op (aside from riscv,isa). But the warnings are
unpleasant to deal with, especially because we're sending user warnings
for extensions that users can't enable/disable.
Instead of enabling all named features all the time, separate them by
priv version. During finalize() time, after we decided which
priv_version the CPU is running, enable/disable all the named extensions
based on the priv spec chosen. This will be enough for a bug fix, but as
a future work we should look into how we can name these extensions in a
way that we don't need an explicit ext_name => priv_ver as we're doing
here.
The named extensions being added in isa_edata_arr[] that will be
enabled/disabled based solely on priv version can be removed from
riscv_cpu_named_features[]. 'zic64b' is an extension that can be
disabled based on block sizes so it'll retain its own flag and entry.
[1] https://lists.gnu.org/archive/html/qemu-devel/2024-03/msg02592.html
Reported-by: Clément Chigot <chigot@adacore.com>
Fixes: 3b8022269c ("target/riscv: add riscv,isa to named features")
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Clément Chigot <chigot@adacore.com>
Message-ID: <20240312203214.350980-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
monitor_puts() doesn't check the monitor pointer, but do_inject_x86_mce()
may have a parameter with NULL monitor pointer. Revert monitor_puts() in
do_inject_x86_mce() to fix, then the fact that we send the same message to
monitor and log is again more obvious.
Fixes: bf0c50d4aa (monitor: expose monitor_puts to rest of code)
Reviwed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Message-ID: <20240320083640.523287-1-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On gen_ll, if a->imm is zero, make_address_x return src1,
but the load to destination may clobber src1. We use a new
destination to fix this problem.
Fixes: c5af6628f4 (target/loongarch: Extract make_address_i() helper)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240320013955.1561311-1-gaosong@loongson.cn>
When we use qemu tcg simulation, the page size of bios is 4KB.
When using the level 2 super huge page (page size is 1G) to create the page table,
it is found that the content of the corresponding address space is abnormal,
resulting in the bios can not start the operating system and graphical interface normally.
The lddir and ldpte instruction emulation has
a problem with the use of super huge page processing above level 2.
The page size is not correctly calculated,
resulting in the wrong page size of the table entry found by tlb.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240318070332.1273939-1-lixianglai@loongson.cn>
stdby,e,m was writing data from the wrong half of the register
into memory for cases 0-3.
Fixes: 25460fc5a7 ("target/hppa: Implement STDBY")
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240319161921.487080-7-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
mfia should return only the iaoq bits without privilege
bits.
Fixes: 98a9cb792c ("target-hppa: Implement system and memory-management insns")
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Message-Id: <20240319161921.487080-6-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the guest modifies the tb it is currently executing from,
it executes a fic instruction. Exit the tb on such instruction,
otherwise we might execute stale code.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20240319161921.487080-5-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The low bit of MMU indices for x86 TCG indicates whether the processor is
in 32-bit mode and therefore linear addresses have to be masked to 32 bits.
However, the index was computed incorrectly, leading to possible conflicts
in the TLB for any address above 4G.
Analyzed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: b1661801c1 ("target/i386: Fix physical address truncation", 2024-02-28)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2206
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the unnecessary "Sparc" at the beginning of the line and
put the chip information into parentheses so that it is clearer
which part of the line have to be passed to "-cpu" to specify a
different CPU.
Message-ID: <20240307174334.130407-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
some users were confused by this message showing under TCG:
Selected CPU generation is too new. Maximum supported model
in the configuration: 'xyz'
Clarify that the maximum can depend on the accel, and add a
hint to try a different one.
Also add a hint for features mismatch to suggest trying
different accel, QEMU and kernel versions.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-ID: <20240314213746.27163-1-cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Prefer fast cpu_env() over slower CPU QOM cast macro
-----BEGIN PGP SIGNATURE-----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=NiP4
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-03-12' of https://gitlab.com/thuth/qemu into staging
* Add missing ERRP_GUARD() statements in functions that need it
* Prefer fast cpu_env() over slower CPU QOM cast macro
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmXwPhYRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWHvBAAgKx5LHFjz3xREVA+LkDTQ49mz0lK3s32
# SGvNlIHjiaDGVttVYhVC4sinBWUruG4Lyv/2QN72OJBzn6WUsEUQE3KPH1d7Y3/s
# wS9X7mj70n4kugWJqeIJP5AXSRasHmWoQ4QJLVQRJd6+Eb9jqwep0x7bYkI1de6D
# bL1Q7bIfkFeNQBXaiPWAm2i+hqmT4C1r8HEAGZIjAsMFrjy/hzBEjNV+pnh6ZSq9
# Vp8BsPWRfLU2XHm4WX0o8d89WUMAfUGbVkddEl/XjIHDrUD+Zbd1HAhLyfhsmrnE
# jXIwSzm+ML1KX4MoF5ilGtg8Oo0gQDEBy9/xck6G0HCm9lIoLKlgTxK9glr2vdT8
# yxZmrM9Hder7F9hKKxmb127xgU6AmL7rYmVqsoQMNAq22D6Xr4UDpgFRXNk2/wO6
# zZZBkfZ4H4MpZXbd/KJpXvYH5mQA4IpkOy8LJdE+dbcHX7Szy9ksZdPA+Z10hqqf
# zqS13qTs3abxymy2Q/tO3hPKSJCk1+vCGUkN60Wm+9VoLWGoU43qMc7gnY/pCS7m
# 0rFKtvfwFHhokX1orK0lP/ppVzPv/5oFIeK8YDY9if+N+dU2LCwVZHIuf2/VJPRq
# wmgH2vAn3JDoRKPxTGX9ly6AMxuZaeP92qBTOPap0gDhihYzIpaCq9ecEBoTakI7
# tdFhV0iRr08=
# =NiP4
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 11:35:50 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-03-12' of https://gitlab.com/thuth/qemu: (55 commits)
user: Prefer fast cpu_env() over slower CPU QOM cast macro
target/xtensa: Prefer fast cpu_env() over slower CPU QOM cast macro
target/tricore: Prefer fast cpu_env() over slower CPU QOM cast macro
target/sparc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/sh4: Prefer fast cpu_env() over slower CPU QOM cast macro
target/rx: Prefer fast cpu_env() over slower CPU QOM cast macro
target/ppc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/openrisc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/nios2: Prefer fast cpu_env() over slower CPU QOM cast macro
target/mips: Prefer fast cpu_env() over slower CPU QOM cast macro
target/microblaze: Prefer fast cpu_env() over slower CPU QOM cast macro
target/m68k: Prefer fast cpu_env() over slower CPU QOM cast macro
target/loongarch: Prefer fast cpu_env() over slower CPU QOM cast macro
target/i386/hvf: Use CPUState typedef
target/hexagon: Prefer fast cpu_env() over slower CPU QOM cast macro
target/cris: Prefer fast cpu_env() over slower CPU QOM cast macro
target/avr: Prefer fast cpu_env() over slower CPU QOM cast macro
target/alpha: Prefer fast cpu_env() over slower CPU QOM cast macro
target: Replace CPU_GET_CLASS(cpu -> obj) in cpu_reset_hold() handler
bulk: Call in place single use cpu_env()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The H_GUEST_RUN_VCPU hcall is used to start execution of a Guest VCPU.
The Hypervisor will update the state of the Guest VCPU based on the
input buffer, restore the saved Guest VCPU state, and start its
execution.
The Guest VCPU can stop running for numerous reasons including HCALLs,
hypervisor exceptions, or an outstanding Host Partition Interrupt.
The reason that the Guest VCPU stopped running is communicated through
R4 and the output buffer will be filled in with any relevant state.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Currently, nested_ppc_state stores a certain set of registers and works
with nested_[load|save]_state() for state transfer as reqd for nested-hv API.
Extending these with additional registers state as reqd for nested PAPR API.
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
These wrappers call out to handle POWER7 and newer in separate
functions but reduce to the generic case when TARGET_PPC64 is not
defined. It is easy enough to include the switch in the beginning of
the generic functions to branch out to the specific functions and get
rid of these wrappers. This avoids one indirection and entirely
compiles out the switch without TARGET_PPC64.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Concatenate #if blocks that are ending then beginning on the next line
again.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Remove check for !defined(CONFIG_USER_ONLY) as this is already within
an #ifndef CONFIG_USER_ONLY block.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Use #ifdef, #ifndef for brevity and add comments to #endif that are
more than a few lines apart for clarity.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add gen_exception_err_nip() that does the same as gen_exception_err()
but takes the nip as a parameter to allow specifying it instead of
using the current instruction address then change gen_exception_err()
to use it.
The gen_exception() and gen_exception_nip() functions are similar so
remove code duplication from those too while at it.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Improve readability by shortening some long comments, removing
comments that state the obvious and dropping some empty lines so they
don't distract when reading the code.
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Use the env_cpu function to get the CPUState for cpu_abort. These are
only needed in case of fatal errors so this allows to avoid casting
and storing CPUState in a local variable wnen not needed.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Big (SMT8) cores have a complicated function to map the core, thread ID
to pervasive topology (PIR). Fix this for power8, power9, and power10.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Caleb Schlossin <calebs@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Currently in tcg mode, when reading from power10 pmu spr like MMCR3,
qemu logs this message (when starting qemu with -d guest_errors)
Trying to read invalid spr 754 (0x2f2) at 0000000030056bb0
This is becuase, no read/write call-backs are registered for
these SPRs. Add support to register generic read/write
functions to these power10 pmu sprs to fix it.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This patch moves the below instructions to decodetree specification:
{add, subf}[c,e,me,ze][o][.] : XO-form
addic[.], subfic : D-form
addex : Z23-form
This patch introduces XO form instructions into decode tree
specification, for which all the four variations([o][.]) have been
handled with a single pattern. The changes were verified by validating
that the tcg ops generated by those instructions remain the same, which
were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
