The GNU assembler produces the following output for instructions
with upper immediates:
00002597 auipc a1,0x2
000024b7 lui s1,0x2
6409 lui s0,0x2 # c.lui
The immediate operands of upper immediates are not shifted.
However, the QEMU disassembler prints them shifted:
00002597 auipc a1,8192
000024b7 lui s1,8192
6409 lui s0,8192 # c.lui
The current implementation extracts the immediate bits and shifts the by 12,
so the internal representation of the immediate is the actual immediate.
However, the immediates are later printed using rv_fmt_rd_imm or
rv_fmt_rd_offset, which don't undo the shift.
Let's fix this by using specific output formats for instructions
with upper immediates, that take care of the shift.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230711075051.1531007-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch introduces the RISC-V Zfa extension, which introduces
additional floating-point instructions:
* fli (load-immediate) with pre-defined immediates
* fminm/fmaxm (like fmin/fmax but with different NaN behaviour)
* fround/froundmx (round to integer)
* fcvtmod.w.d (Modular Convert-to-Integer)
* fmv* to access high bits of float register bigger than XLEN
* Quiet comparison instructions (fleq/fltq)
Zfa defines its instructions in combination with the following extensions:
* single-precision floating-point (F)
* double-precision floating-point (D)
* quad-precision floating-point (Q)
* half-precision floating-point (Zfh)
Since QEMU does not support the RISC-V quad-precision floating-point
ISA extension (Q), this patch does not include the instructions that
depend on this extension. All other instructions are included in this
patch.
The Zfa specification can be found here:
https://github.com/riscv/riscv-isa-manual/blob/master/src/zfa.tex
The Zfa specifciation is frozen and is in public review since May 3, 2023:
https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/SED4ntBkabg
The patch also includes a TCG test for the fcvtmod.w.d instruction.
The test cases test for correct results and flag behaviour.
Note, that the Zfa specification requires fcvtmod's flag behaviour
to be identical to a fcvt with the same operands (which is also
tested).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230710071243.282464-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230703071759.86775-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Support for emulating XThead* instruction has been added recently.
This patch adds support for these instructions to the RISC-V disassembler.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-9-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds XVentanaCondOps support to the RISC-V disassembler.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230612111034.3955227-8-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A previous patch provides a pointer to the RISCVCPUConfig data.
Let's use this to add the necessary code for vendor extensions.
This patch does not change the current behaviour, but clearly
defines how vendor extension support can be added to the disassembler.
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-7-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds a reference to a struct rv_opcode_data object
into struct rv_decode. This further allows to remove all references
to the global variable opcode_data (which is renamed to rvi_opcode_data).
This patch does not introduce any functional change, but prepares
the code for more struct rv_opcode_data objects in the future.
This patch is based on previous work from Liu Zhiwei:
https://lists.nongnu.org/archive/html/qemu-devel/2022-08/msg03662.html
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-6-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The enum value 'rv_op_illegal' does not represent an
instruction, but is a catch-all value in case we have
no match in the decoder. Let's make the value a shared
one, so that other compile units can reuse it.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-5-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In order to enable vendor disassembler support, we need to
move types and constants into a header file so that other
compilation units can use them as well.
This patch does not introduce any functional changes.
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-4-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove redundant parenthese and fix multi-line comments.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-9-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix lines with over 80 characters.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-8-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently decomp_rv32 and decomp_rv64 value in opcode_data for vector
instructions are the same op index as their own. And they have no
functional decomp_data. So they have no functional difference from just
leaving them as zero.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-7-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Support disas for Z*inx instructions only when Zfinx extension is supported.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Support disas for Zcmt* instructions only when related extensions
are supported.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Pass RISCVCPUConfig as disassemble_info.target_info to support disas
of conflict instructions related to specific extensions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use target_words_bigendian() instead of an ifdef.
Remove CONFIG_RISCV_DIS from the check for riscv as a host; this is
a poisoned identifier, and anyway will always be set by meson.build
when building on a riscv host.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230508133745.109463-3-thuth@redhat.com>
[rth: Type change done in a separate patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We'd like to move disas.c into the common code source set, where
CONFIG_USER_ONLY is not available anymore. So we have to move
the related code into a separate file instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230508133745.109463-2-thuth@redhat.com>
[rth: Type change done in a separate patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503072331.1747057-83-richard.henderson@linaro.org>
Use uint64_t for the pc, and size_t for the size.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503072331.1747057-81-richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503072331.1747057-80-richard.henderson@linaro.org>
Zcmp/Zcmt instructions will override disasm for c.fld*/c.fsd*
instructions currently.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-10-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix incorrect register name in RISC-V disassembler for fmv,fabs,fneg instructions
Signed-off-by: Mikhail Tyutin <m.tyutin@yadro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <3454991f-7f64-24c3-9a36-f5fa2cc389e1@yadro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The decoding of the slli_uw currently contains decoding
error: shamt part of opcode has six bits, not five.
Fixes 3de1fb71("target/riscv: update disas.c for xnor/orn/andn and slli.uw")
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230227090228.17117-1-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Due to typo in opcode list, ctzw is disassembled as clzw instruction.
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Fixes: 02c1b569a1 ("disas/riscv: Add Zb[abcs] instructions")
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230217151459.54649-1-ivan.klokov@syntacore.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The decoding of the following instructions from Zb[abcs] currently
contains decoding/printing errors:
* xnor,orn,andn: the rs2 operand is not being printed
* slli.uw: decodes and prints the immediate shift-amount as a
register (e.g. 'shift-by-2' becomes 'sp') instead of
interpreting this as an immediate
This commit updates the instruction descriptions to use the
appropriate decoding/printing formats.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230120151551.1022761-1-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since the nanomips disassembler is not C++ code anymore, it need not
depend on link_language == cpp. Always include it and remove the
CONFIG_NANOMIPS_DIS symbol.
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230110084942.299460-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
There is no point in looking for a 48-bit opcode if we've
not read the second word for a 32-bit opcode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221106023735.5277-5-richard.henderson@linaro.org>
Split out a helper function for reading a uint16_t
with the correct endianness.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221106023735.5277-4-richard.henderson@linaro.org>
Since Disassemble wants the data in this format, collect
it that way. This allows using a loop to print the bytes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221106212852.152384-3-richard.henderson@linaro.org>
Reduce the number of local variables within the scope of the
setjmp by moving it to the existing helper. The actual length
returned from Disassemble is not used, because we have already
determined the length while reading bytes. Fixes:
nanomips.c: In function ‘print_insn_nanomips’:
nanomips.c:21925:14: error: variable ‘insn1’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
nanomips.c:21925:25: error: variable ‘insn2’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
nanomips.c:21925:36: error: variable ‘insn3’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
nanomips.c:21926:22: error: variable ‘buf’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221106212852.152384-2-richard.henderson@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221101114458.25756-5-philmd@linaro.org>
Suggested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221101114458.25756-4-philmd@linaro.org>
Fix:
disas/nanomips.c:12231:62: warning: format specifies type 'char *' but the argument has type 'uint64' (aka 'unsigned long long') [-Wformat]
return img_format("RESTOREF 0x%" PRIx64 ", %s", u_value, count_value);
~~ ^~~~~~~~~~~
%llu
Fixes: 4066c152b3 ("disas/nanomips: Remove IMMEDIATE functions")
Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221101114458.25756-3-philmd@linaro.org>
disas/mips.c got added in commit 6643d27ea0 ("MIPS disas support")
apparently based on binutils tag 'gdb_6_1-branchpoint' [1].
Back then, MIPSr6 was not supported (added in binutils commit
7361da2c952 during 2014 [2]).
Binutils codebase diverged so much over the last 18 years, it is
not possible to simply cherry-pick their changes, so fix it BEQZC /
BNEZC 21-bit signed branch displacement locally.
[1] https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=opcodes/mips-dis.c;hb=refs/tags/gdb_6_1-branchpoint
[2] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=7361da2c952
Fixes: 31837be3ee ("target-mips: add compact and CP1 branches")
Signed-off-by: David Daney <david.daney@fungible.com>
Reviewed-by: Marcin Nowakowski <marcin.nowakowski@fungible.com>
[PMD: Added commit description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@fungible.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221014112322.61119-1-philmd@fungible.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Now that everything has been converted to C code the nanomips.cpp file
has been renamed. Therefore, meson.build file is also changed.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-25-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Replaced argument passing by reference with passing by address.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-24-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since there's no support for exception handling in C, the try-catch
blocks have been deleted, and throw clauses are replaced. When a runtime
error happens, we're printing out the error message. Disassembling of
the current instruction interrupts. This behavior is achieved by adding
sigsetjmp() to discard further disassembling after the error message
prints and by adding the siglongjmp() function to imitate throwing an
error. The goal was to maintain the same output as it was.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-22-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This patch expands the Dis_info struct, which should hold the
necessary data for handling runtime errors. Fields fprintf_func and
stream are in charge of error printing. Field buf enables the use of
sigsetjmp() and siglongjmp() functions. Support for runtime error
handling will be added later.
We're filling Dis_info at the entrance of the nanoMIPS disassembler,
i.e. print_insn_nanomips. Next, we're adding that information as an
argument wherever we need to.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-21-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Disassemble function that calls the other variant of it is deleted.
Where it is called, now we're directly calling the other implementation.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-20-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
g_autofree attribute is added for every dynamically allocated string to
prevent memory leaking.
The implementation of the several functions that work with dynamically
allocated strings is slightly changed so we can add those attributes.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-19-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
CPR functions has been removed.
Before this patch, we'd been calling img_format twice, the first time
through the CPR function to get an appropriate string and the second
time to print that formatted string. There's no more need for that.
Therefore, calls to CPR are removed, and now we're directly printing
"CP" and integer value instead.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-18-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Both versions of IMMEDIATE functions have been removed.
Before this patch, we'd been calling img_format twice, the first time
through the IMMEDIATE to get an appropriate string and the second time
to print that string. There's no more need for that. Therefore, calls to
IMMEDIATE are removed, and now we're directly printing the integer
values instead.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-17-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The return type of typedef disassembly_function is changed to char *
instead of std::string. Therefore, for every particular
disassembly_function function signature is changed.
For example:
- static std::string ABS_D(uint64 instruction, img_address m_pc) {...}
is replaced with
- static char *ABS_D(uint64 instruction, img_address m_pc) {...}
Every helper function used to return std::string is changed to return
const char * or char *. Where the return value points to a static string
that the caller must not free, the return type is const char *. If a
function allocates memory and the caller is required to free it, the
return type is a char *. This applies to the following functions:
img_format, to_string, GPR, save_restore_list, FPR, etc.
Now that we replaced every std::string for const char * or char *, it is
possible to delete multiple versions of the img_format function. The
general version:
- static char *img_format(const char *format, ...) {...}
can handle all string formatting, so others have been deleted.
Where necessary, strings are dynamically allocated with g_strjoinv,
g_strdup, g_strdup_vprintf, and g_strdup_printf. Memory leaking will be
prevented later.
String concatenation in the save_restore_list() function is handled
using g_strjoinv() function instead of += operator.
The type of the "dis" parameter in the Disassemble function is changed
- from std::string &
- to char **
Without applying all of these changes, the nanomips disassembler may be
buildable but can't produce the appropriate output, so all of them are
made together.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-16-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Following functions just wrap the decode_gpr_gpr3() function:
- encode_rs3_and_check_rs3_ge_rt3()
- encode_rs3_and_check_rs3_lt_rt3()
Therefore those have been deleted. Calls to these two functions have
been replaced with calls to decode_gpr_gpr3.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-15-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Functions that have just one parameter and simply return it have been
deleted. Calls to these functions have been replaced with the argument
itself.
We're deleting following functions:
- both versions of copy()
- encode_s_from_address()
- encode_u_from_address()
- encode_lsb_from_pos_and_size()
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-14-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
<sstream> is a C++ library and it's not used by disassembler.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-13-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
