Reserve a register for the guest_base using aarch64 for reference.
By doing so, we do not have to recompute it for every memory load.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From armv6, the architecture supports unaligned accesses.
All we need to do is perform the correct alignment check
in tcg_out_tlb_read.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will shortly allow the use of unaligned memory accesses,
and these require proper alignment. Use get_alignment_bits
to verify and remove USING_SOFTMMU.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is now always true, since we require armv6.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is now always true, since we require armv6.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Support for unaligned accesses is difficult for pre-v6 hosts.
While debian still builds for armv4, we cannot use a compile
time test, so test the architecture at runtime and error out.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
With arm32, the ABI gives us 8-byte alignment for the stack.
While it's possible to realign the stack to provide 16-byte alignment,
it's far easier to simply not encode 16-byte alignment in the
VLD1 and VST1 instructions that we emit.
Remove the assertion in temp_allocate_frame, limit natural alignment
to the provided stack alignment, and add a comment.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1999878
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210912174925.200132-1-richard.henderson@linaro.org>
Message-Id: <20211206191335.230683-2-richard.henderson@linaro.org>
We're about to move this out of tcg.h, so rename it
as we did when moving MemOp.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have lacked expressive support for memory sizes larger
than 64-bits for a while. Fixing that requires adjustment
to several points where we used this for array indexing,
and two places that develop -Wswitch warnings after the change.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let the compiler decide about inlining.
Remove tcg_out_nop as unused.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have already computed the rotated value of the imm8
portion of the complete imm12 encoding. No sense leaving
the combination of rot + rotation to the caller.
Create an encode_imm12_nofail helper that performs an assert.
This removes the final use of the local "rotl" function,
which duplicated our generic "rol32" function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expand these hard-coded instructions symbolically.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
ARMv4T has BX as its only interworking instruction. In order
to support testing of different architecture revisions with a
qemu binary that may have been built for, say ARMv6T2, fill in
the blank required to make calls to helpers in thumb mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
According to the Arm ARM DDI 0406C, section A1.3, the valid variants
are ARMv5T, ARMv5TE, ARMv5TEJ -- there is no ARMv5 without Thumb.
Therefore simplify the test from preprocessor ifdefs to base
architecture revision. Retain the "t" in the name to minimize churn.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Some of the functions specified _reg, some _imm, and some
left it blank. Make it clearer to which we are referring.
Split tcg_out_b_reg from tcg_out_bx_reg, to indicate when
we do not actually require BX semantics.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GCC since 4.8 provides the definition and we now require 7.5.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 5e8892db93 fixed several function signatures but tcg_out_vec_op
for arm is missing. It causes a build error on armv6 and armv7:
tcg-target.c.inc:2718:42: error: argument 5 of type 'const TCGArg *'
{aka 'const unsigned int *'} declared as a pointer [-Werror=array-parameter=]
const TCGArg *args, const int *const_args)
~~~~~~~~~~~~~~^~~~
../tcg/tcg.c:120:41: note: previously declared as an array 'const TCGArg[16]'
{aka 'const unsigned int[16]'}
const TCGArg args[TCG_MAX_OP_ARGS],
~~~~~~~~~~~~~~^~~~
Signed-off-by: Jose R. Ziviani <jziviani@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210908185338.7927-1-jziviani@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since 6eea04347e, all tcg backends support goto_ptr.
Remove the conditional, making support mandatory.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that the middle-end can replicate the same tricks as tcg/arm
used for optimizing bswap for signed loads and for stores, do not
pretend to have these memory ops in the backend.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Combine the three bswap16 routines, and differentiate via the flags.
Use the correct flags combination from the load/store routines, and
pass along the constant parameter from tcg_out_op.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 5e8892db93 fixed several function signatures but tcg_out_op for
arm is missing. This patch fixes it as well.
Signed-off-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210610224450.23425-1-jziviani@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove the ifdef ladder and move each define into the
appropriate header file.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement via expansion, so don't actually set TCG_TARGET_HAS_rotv_vec.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement via expansion, so don't actually set TCG_TARGET_HAS_roti_vec.
For NEON, this is shift-right followed by shift-left-and-insert.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The three vector shift by vector operations are all implemented via
expansion. Therefore do not actually set TCG_TARGET_HAS_shv_vec,
as none of shlv_vec, shrv_vec, sarv_vec may actually appear in the
instruction stream, and therefore also do not appear in tcg_target_op_def.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
NEON has 3 instructions implementing this 4 argument operation,
with each insn overlapping a different logical input onto the
destination register.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is minimum and maximum, signed and unsigned.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is saturating add and subtract, signed and unsigned.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This consists of the three immediate shifts: shli, shri, sari.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These logical and arithmetic operations are optional, but are
trivial to accomplish with the existing infrastructure.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implementing dup2, add, sub, and, or, xor as the minimal set.
This allows us to actually enable neon in the header file.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Most of dupi is copied from tcg/aarch64, which has the same
encoding for AdvSimdExpandImm.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add registers and function stubs. The functionality
is disabled via use_neon_instructions defined to 0.
We must still include results for the mandatory opcodes in
tcg_target_op_def, as all opcodes are checked during tcg init.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the return value to bool, because that's what is should
have been from the start. Pass the ct mask instead of the whole
TCGArgConstraint, as that's the only part that's relevant.
Change the value argument to int64_t. We will need the extra
width for 32-bit hosts wanting to match vector constants.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All backends have now been converted to tcg-target-con-set.h,
so we can remove the fallback code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All backends have now been converted to tcg-target-con-str.h,
so we can remove the fallback code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are now completely covered by mov from a
TYPE_CONST temporary.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that all native tcg hosts support splitwx,
make this pointer const.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
