On platforms that don't support makecontext(3) use gthread based
coroutine implementation.
Darwin has makecontext(3) but getcontext(3) is stubbed out to return
ENOTSUP. Andreas Färber <andreas.faerber@web.de> debugged this and
contributed the ./configure test which solves the issue for Darwin/ppc64
(and ppc) v10.5.
[Original patch by Aneesh, made consistent with coroutine-ucontext.c and
switched to GStaticPrivate by Stefan. Tested on Linux and OpenBSD.]
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Asynchronous code is becoming very complex. At the same time
synchronous code is growing because it is convenient to write.
Sometimes duplicate code paths are even added, one synchronous and the
other asynchronous. This patch introduces coroutines which allow code
that looks synchronous but is asynchronous under the covers.
A coroutine has its own stack and is therefore able to preserve state
across blocking operations, which traditionally require callback
functions and manual marshalling of parameters.
Creating and starting a coroutine is easy:
coroutine = qemu_coroutine_create(my_coroutine);
qemu_coroutine_enter(coroutine, my_data);
The coroutine then executes until it returns or yields:
void coroutine_fn my_coroutine(void *opaque) {
MyData *my_data = opaque;
/* do some work */
qemu_coroutine_yield();
/* do some more work */
}
Yielding switches control back to the caller of qemu_coroutine_enter().
This is typically used to switch back to the main thread's event loop
after issuing an asynchronous I/O request. The request callback will
then invoke qemu_coroutine_enter() once more to switch back to the
coroutine.
Note that if coroutines are used only from threads which hold the global
mutex they will never execute concurrently. This makes programming with
coroutines easier than with threads. Race conditions cannot occur since
only one coroutine may be active at any time. Other coroutines can only
run across yield.
This coroutines implementation is based on the gtk-vnc implementation
written by Anthony Liguori <anthony@codemonkey.ws> but it has been
significantly rewritten by Kevin Wolf <kwolf@redhat.com> to use
setjmp()/longjmp() instead of the more expensive swapcontext() and by
Paolo Bonzini <pbonzini@redhat.com> for Windows Fibers support.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds support for a usb-redir device, which takes a chardev
as a communication channel to an actual usbdevice using the usbredir protocol.
Compiling the usb-redir device requires usbredir-0.3 to be installed for
the usbredir protocol parser, usbredir-0.3 also contains a server for
redirecting usb traffic from an actual usb device. You can get the 0.3
release of usbredir here:
http://people.fedoraproject.org/~jwrdegoede/usbredir-0.3.tar.bz2
(getting a more formal site for it is a WIP)
Example usage:
1) Start usbredirserver for a usb device:
sudo usbredirserver 045e:0772
2) Start qemu with usb2 support + a chardev talking to usbredirserver +
a usb-redir device using this chardev:
qemu ... \
-readconfig docs/ich9-ehci-uhci.cfg \
-chardev socket,id=usbredirchardev,host=localhost,port=4000 \
-device usb-redir,chardev=usbredirchardev,id=usbredirdev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Given an object recieved via QMP, this code uses the dispatch table
provided by qmp_registry.c to call the corresponding marshalling/dispatch
function and format return values/errors for delivery to the QMP.
Currently only synchronous QMP functions are supported, but this will
also be used for async QMP functions and QMP guest proxy dispatch as
well.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Registration/lookup functions for that provide a lookup table for
dispatching QMP commands.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Type of Visitor class that can be passed into a qapi-generated C
type's visitor function to free() any heap-allocated data types.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Type of Visiter class that serves as the inverse of the input visitor:
it takes a series of native C types and uses their values to construct a
corresponding QObject. The command marshaling/dispatcher functions will
use this to convert the output of QMP functions into a QObject that can
be sent over the wire.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
A type of Visiter class that is used to walk a qobject's
structure and assign each entry to the corresponding native C type.
Command marshaling function will use this to pull out QMP command
parameters recieved over the wire and pass them as native arguments
to the corresponding C functions.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Base definitions/includes for Visiter interface used by generated
visiter/marshalling code.
Includes a GenericList type. Our lists require an embedded element.
Since these types are generated, if you want to use them in a different
type of data structure, there's no easy way to add another embedded
element. The solution is to have non-embedded lists and that what this is.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
GLib is an extremely common library that has a portable thread implementation
along with tons of other goodies.
GLib and GObject have a fantastic amount of infrastructure we can leverage in
QEMU including an object oriented programming infrastructure.
Short term, it has a very nice thread pool implementation that we could leverage
in something like virtio-9p. It also has a test harness implementation that
this series will use.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Don't compile virtio.c in hwlib, it depends on memory accesses
performed in CPU endianness.
Make loads and stores in CPU endianness unavailable to devices
and poison them to avoid further bugs.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introduce CONFIG_XEN_BACKEND so that this new config solely controls the
target-independent backend build and CONFIG_XEN can focus on per-target
building.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
* 'cocoa-for-upstream' of git://repo.or.cz/qemu/afaerber:
Darwin: Fix compilation warning regarding the deprecated daemon() function
cocoa: Avoid warning related to multiple handleEvent: definitions
cocoa: Revert dependency on VNC
cocoa: Provide central qemu_main() prototype
Fix libfdt warnings on Darwin
configure: Fix check for fdatasync()
Remove warning in printf due to type mismatch
Cocoa: avoid displaying window when command-line contains '-h' or '-help'
Fix compilation warning due to incorrectly specified type
cocoa: do not create a spurious window for -version
No flag to configure is required. Instead, added a libcacard.la target that
is not built by default, only when requested explicitly via:
mkdir build
cd build
../configure
make libcacard.la
make install-libcacard
Uses libtool to do actual linking of object files and shared library, and
installing. Tested only under linux, but supposed to work on other systems as
well.
If libtool isn't found you get a message complaining about that, only at build
time (since it is not a default target I did not add a message at configure
time).
New build artifacts:
.libs subdirectories (at <buildroot> and <buildroot>/libcacard)
*.lo files (at same locations as the respective o files)
Added %.lo : %.c rule that uses libtool.
Updated clean rule to clean up those artifacts.
Added specific rule to call dtrace with libtool wrapper (note that because of
a current upstream dtrace bug fixed by systemtap b1568fd85 commit the -fPIC flag
isn't actually passed on. still current dtrace+libtool produced object links fine).
If libtool is missing any of the following targets will complain and exit 1:
any subdir: *.lo
root and libcacard: libcacard.la, libcacard-instsall
Tested to link and load with all tracing backends.
In 821601ea5b (Make VNC support optional)
cocoa.o was moved from ui-obj-$(CONFIG_COCOA) to vnc-obj-$(CONFIG_COCOA),
adding a dependency on $(CONFIG_VNC). That must've been unintentional.
Cc: Jes Sorensen <Jes.Sorensen@redhat.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
This module has no target dependencies (except for target_phys_addr_t
size) and can thus be built as part of libhw.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
New error-handling framework that allows for exception-like error
propagation.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 353ac78d49 moved the files
without fixing the include paths. It used a modified CFLAGS
to add hw to the include search path, but this breaks builds
where the user wants to set special CFLAGS. Long include paths
also increase compilation time.
Therefore this patch removes the special CFLAGS for virtio
and fixes the include statements by using relative include paths.
v2: Remove special CFLAGS.
v3: Update needed for latest QEMU.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Venkateswararao Jujjuri (JV) <jvrao@linux.vnet.ibm.com>
This patch move the 9p device registration into its own file
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri (JV) <jvrao@linux.vnet.ibm.com>
If virtio is not enabled then we should not pull in
virtfs files
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri (JV) <jvrao@linux.vnet.ibm.com>
This patch finally merges the EHCI host adapter aka USB 2.0 support.
Based on the ehci bits collected @ git://git.kiszka.org/qemu.git ehci
EHCI has a long out-of-tree history. Project was started by Mark
Burkley, with contributions by Niels de Vos. David S. Ahern continued
working on it. Kevin Wolf, Jan Kiszka and Vincent Palatin contributed
bugfixes.
/me (Gerd Hoffmann) picked it up where it left off, prepared the code
for merge, fixed a few bugs and added basic user docs.
Cc: David S. Ahern <daahern@cisco.com>
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Kevin Wolf <mail@kevin-wolf.de>
Cc: Vincent Palatin <vincent.palatin_qemu@m4x.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now that we start adding more files related to 9pfs
it make sense to move them to a separate directory
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Besides moving code, this patch only fixes some whitespace issues in the moved
code and makes all functions in atapi.c static which can be static.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit has the side-effect of making the qemu-nbd binary
capable of binding to IPv6 addresses. ("-b ::1", for instance).
block/nbd.c fails to parse IPv6 IP addresses correctly at this
point, but will work over IPv6 when given a hostname. It still
works over IPv4 as before.
We move the qemu-sockets object from the 'common' to the 'block'
list in the Makefile. The common list includes the block list,
so this is effectively a no-op for the rest of the code.
We also add 32-bit 'magic' attributes to nbd_(request|reply) to
facilitate calculating maximum request/response sizes later.
Signed-off-by: Nick Thomas <nick@bytemark.co.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the basic infrastructure for supporting progress output
on the command line, as well as progress support for qemu-img commands
'rebase' and 'convert'.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This devices uses libcacard (internal) to emulate a smartcard conforming
to the CAC standard. It attaches to the usb-ccid bus. Usage instructions
(example command lines) are in the following patch in docs/ccid.txt. It
uses libcacard which uses nss, so it can work with both hw cards and
certificates (files).
Signed-off-by: Alon Levy <alevy@redhat.com>
---
changes from v20->v21: (Jes Sorenson review)
* cosmetics
* use qemu-thread and qemu_malloc/qemu_free
changes from v19->v20:
* checkpatch.pl
changes from v18->v19:
* add qdev.desc
* backend: drop the enumeration property, back to using a string one.
changes from v16->v17:
* use PROP_TYPE_ENUM for backend
changes from v15->v16:
* fix error reporting in initfn
* bump copyright year
* update copyright license
changes from v1:
* remove stale comments, use only c-style comments
* bugfix, forgot to set recv_len
* change reader name to 'Virtual Reader'
libcacard emulates a Common Access Card (CAC) which is a standard
for smartcards. It is used by the emulated ccid card introduced in
a following patch. Docs are available in docs/libcacard.txt
Signed-off-by: Alon Levy <alevy@redhat.com>
---
changes from v24->v25:
* Fix out of tree builds.
* Fix build with linux-user targets.
changes from v23->v24: (Jes Sorensen review 2)
* Makefile.target: use obj-$(CONFIG_*) +=
* remove unrequired includes, include qemu-common before qemu-thread
* required adding #define NO_NSPR_10_SUPPORT (harmless)
changes from v22->v23:
* configure fixes: (reported by Stefan Hajnoczi)
* test a = b, not a == b (second isn't portable)
* quote $source_path in case it contains spaces
- this doesn't really help since there are many other places
that need similar fixes, not introduced by this patch.
changes from v21->v22:
* fix configure to not link libcacard if nss not found
(reported by Stefan Hajnoczi)
* fix vscclient linkage with simpletrace backend
(reported by Stefan Hajnoczi)
* card_7816.c: add missing break in ERROR_DATA_NOT_FOUND
(reported by William van de Velde)
changes from v20->v21: (Jes Sorensen review)
* use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc
and qemu_free), error_report
* assert instead of ASSERT
* cosmetic fixes
* use strpbrk and isspace
* add --disable-nss --enable-nss here, instead of in the final patch.
* split vscclient, passthru and docs to following patches.
changes from v19->v20:
* checkpatch.pl
changes from v15->v16:
Build:
* don't erase self with distclean
* fix make clean after make distclean
* Makefile: make vscclient link quiet
Behavioral:
* vcard_emul_nss: load coolkey in more situations
* vscclient:
* use hton,ntoh
* send init on connect, only start vevent thread on response
* read payload after header check, before type switch
* remove Reconnect
* update for vscard_common changes, empty Flush implementation
Style/Whitespace:
* fix wrong variable usage
* remove unused variable
* use only C style comments
* add copyright header
* fix tabulation
Signed-off-by: Alon Levy <alevy@redhat.com>
libcacard: fix out of tree builds
The passthru ccid card is a device sitting on the usb-ccid bus and
using a chardevice to communicate with a remote device using the
VSCard protocol defined in libcacard/vscard_common.h
Usage docs available in following patch in docs/ccid.txt
Signed-off-by: Alon Levy <alevy@redhat.com>
---
Changes from v23->v24:
* fixed double license line in header.
Changes from v20->v21: (Jes Sorensen review)
* add reference to COPYING in header
* long comment reformatting
Changes from v19->v20:
* checkpatch.pl
Changes from v18->v19:
* add qdev.desc
* remove .qdev.unplug (no hot unplug support for ccid bus)
Changes from v16->v17:
* fix wrong cast when receiving VSC_Error
* ccid-card-passthru: force chardev user wakeup by sending Init
see lengthy comment below.
Changes from v15->v16:
Behavioral changes:
* return correct size
* return error instead of assert if client sent too large ATR
* don't assert if client sent too large a size, but add asserts for indices to buffer
* reset vscard_in indices on chardev disconnect
* handle init from client
* error if no chardev supplied
* use ntoh, hton
* eradicate reader_id_t
* remove Reconnect usage (removed from VSCARD protocol)
* send VSC_SUCCESS on card insert/remove and reader add/remove
Style fixes:
* width of line fix
* update copyright
* remove old TODO's
* update file header comment
* use macros for debug levels
* c++ style comment replacement
* update copyright license
* fix ATR size comment
* fix whitespace in struct def
* fix DPRINTF prefix
* line width fix
ccid-card-passthru: force chardev user wakeup by sending Init
The problem: how to wakeup the user of the smartcard when the smartcard
device is initialized?
Long term solution: have a callback interface. This was done via
the deprecated so called chardev ioctl interface.
Short term solution: do a write. Specifically we write an Init message.
And we change the client to send it's own Init message regardless of
receiving this one. Additional Init messages will be regarded as
acceptable, the first one received after connection establishment is
the determining one wrt capabilities.
A CCID device is a smart card reader. It is a USB device, defined at [1].
This patch introduces the usb-ccid device that is a ccid bus. Next patches will
introduce two card types to use it, a passthru card and an emulated card.
[1] http://www.usb.org/developers/devclass_docs/DWG_Smart-Card_CCID_Rev110.
Signed-off-by: Alon Levy <alevy@redhat.com>
---
changes from v20->v21: (Jes Sorenson review)
* cosmetic changes - fix multi line comments.
* reorder fields in USBCCIDState
* add reference to COPYING
* add --enable-smartcard and --disable-smartcard here (moved
from last patch)
changes from v19->v20:
* checkpatch.pl
changes from v18->v19:
* merged: ccid.h: add copyright, fix define and remove non C89 comments
* add qdev.desc
changes from v15->v16:
Behavioral changes:
* fix abort on client answer after card remove
* enable migration
* remove side affect code from asserts
* return consistent self-powered state
* mask out reserved bits in ccid_set_parameters
* add missing abRFU in SetParameters (no affect on linux guest)
whitefixes / comments / consts defines:
* remove stale comment
* remove ccid_print_pending_answers if no DEBUG_CCID
* replace printf's with DPRINTF, remove DEBUG_CCID, add verbosity defines
* use error_report
* update copyright (most of the code is not original)
* reword known bug comment
* add missing closing quote in comment
* add missing whitespace on one line
* s/CCID_SetParameter/CCID_SetParameters/
* add comments
* use define for max packet size
Comment for "return consistent self-powered state":
the Configuration Descriptor bmAttributes claims we are self powered,
but we were returning not self powered to USB_REQ_GET_STATUS control message.
In practice, this message is not sent by a linux 2.6.35.10-74.fc14.x86_64
guest (not tested on other guests), unless you issue lsusb -v as root (for
example).
It's wrong to call BHs directly, even in tools. The only operations that
schedule BHs are called in a loop that (indirectly) contains a call to
qemu_bh_poll anyway, so we're not losing the scheduled BHs: Tools either use
synchronous functions, which are guaranteed to have completed (including any
BHs) when they return; or if they use asynchronous functions, they need to call
qemu_aio_wait() or similar functions already today.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
For now, qemu_cond_timedwait and qemu_mutex_timedlock are left as
POSIX-only functions. They can be removed later, once the patches
that remove their uses are in.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add most used bitmap and bitops functions into bitmap.c and bitops.c.
Theses functions are mostly copied from Linux kernel source.
Some of these functions are already redefined in the VNC server. Some
of them could be used for some block stuff. The yet yo be submitted
NUMA work also need bitmaps.
bitops_ffsl() and bitops_flsl() are here because bitops/bitmap works
on unsigned long, not int, and we can't use current code because:
* ffs only works on int
* qemu_fls only works on int
* ffsl is a GNU extension
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Will be required for SIGBUS handling. For obvious reasons, this will
remain a nop on Windows hosts.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
There are multiple ahci devices out there. The currently implemented ich-9
is only one of the many. So let's split that one out into a separate file
to stress the difference.
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Adding a chardev backend for spice, where spice determines what
to do with it based on the name attribute given during chardev creation.
For usage by spice vdagent in conjunction with a properly named
virtio-serial device, and future smartcard channel usage.
Example usage:
qemu -device virtio-serial -chardev spicevmc,name=vdagent,id=vdagent \
-device virtserialport,chardev=vdagent,name=com.redhat.spice.0
v4->v5:
* add tracing events
* fix missing comma
* fix help string to show debug is optional
v3->v4:
* updated commit message
v1->v3 changes: (v2 had a wrong commit message)
* removed spice-qemu-char.h, folded into ui/qemu-spice.h
* removed dead IOCTL code
* removed comment
* removed ifdef CONFIG_SPICE from qemu-config.c and qemu-options.hx help.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This adds some new cache functions to qcow2 which can be used for caching
refcount blocks and L2 tables. When used with cache=writethrough they work
like the old caching code which is spread all over qcow2, so for this case we
have merely a cleanup.
The interesting case is with writeback caching (this includes cache=none) where
data isn't written to disk immediately but only kept in cache initially. This
leads to some form of metadata write batching which avoids the current "write
to refcount block, flush, write to L2 table" pattern for each single request
when a lot of cluster allocations happen. Instead, cache entries are only
written out if its required to maintain the right order. In the pure cluster
allocation case this means that all metadata updates for requests are done in
memory initially and on sync, first the refcount blocks are written to disk,
then fsync, then L2 tables.
This improves performance of scenarios with lots of cluster allocations
noticably (e.g. installation or after taking a snapshot).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds hw/usb-desc.[ch] files. They carry data structures
for various usb descriptors and helper functions to generate usb
packets from the structures.
The intention is to have a internal representation of the device
desription which is more usable than the current char array blobs,
so we can have common code handle common usb device emulation using
the device description.
The usage of this infrastructure is optional for usb drivers as there
are cases such as pass-through where it probably isn't very useful.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
by introducing pci-stub.c, eliminate QMP dependency on core PCI code
rquired by query-pci command.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch implements the read/write state machine. Operations are
fully asynchronous and multiple operations may be active at any time.
Allocating writes lock tables to ensure metadata updates do not
interfere with each other. If two allocating writes need to update the
same L2 table they will run sequentially. If two allocating writes need
to update different L2 tables they will run in parallel.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds code to look up data cluster offsets in the image via
the L1/L2 tables. The L2 tables are writethrough cached in memory for
performance (each read/write requires a lookup so it is essential to
cache the tables).
With cluster lookup code in place it is possible to implement
bdrv_is_allocated() to query the number of contiguous
allocated/unallocated clusters.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch introduces the qed on-disk layout and implements image
creation. Later patches add read/write and other functionality.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds an emulation layer for an ICH-9 AHCI controller. For now
this controller does not do IDE legacy emulation. It is a pure AHCI controller.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
RBD is an block driver for the distributed file system Ceph
(http://ceph.newdream.net/). This driver uses librados (which is part
of the Ceph server) for direct access to the Ceph object store and is
running entirely in userspace (Yehuda also wrote a driver for the
linux kernel, that can be used to access rbd volumes as a block
device).
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Christian Brunner <chb@muc.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The e1000 has compatibility code to handle big endianness which makes it
mandatory to be recompiled on different targets.
With the generic mmio endianness solution, there's no need for that anymore.
We just declare all mmio to be little endian and call it a day.
Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The core pcnet emulation code is used by both the PCI "pcnet" device
and the SPARC "lance" device. Split the common code frm the PCI code so
that that can be configures independantly.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Make virtio devices optional. Selecting individual devices is not useful
as the host bindings are all in one file.
Signed-off-by: Paul Brook <paul@codesourcery.com>
This patch implements helper functions for pcie aer capability
which will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This introduces a new tracing backend that targets the SystemTAP
implementation of DTrace userspace tracing. The core functionality
should be applicable and standard across any DTrace implementation
on Solaris, OS-X, *BSD, but the Makefile rules will likely need
some small additional changes to cope with OS specific build
requirements.
This backend builds a little differently from the other tracing
backends. Specifically there is no 'trace.c' file, because the
'dtrace' command line tool generates a '.o' file directly from
the dtrace probe definition file. The probe definition is usually
named with a '.d' extension but QEMU uses '.d' files for its
external makefile dependancy tracking, so this uses '.dtrace' as
the extension for the probe definition file.
The 'tracetool' program gains the ability to generate a trace.h
file for DTrace, and also to generate the trace.d file containing
the dtrace probe definition.
Example usage of a dtrace probe in systemtap looks like:
probe process("qemu").mark("qemu_malloc") {
printf("Malloc %d %p\n", $arg1, $arg2);
}
* .gitignore: Ignore trace-dtrace.*
* Makefile: Extra rules for generating DTrace files
* Makefile.obj: Don't build trace.o for DTrace, use
trace-dtrace.o generated by 'dtrace' instead
* tracetool: Support for generating DTrace data files
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This introduces a new tracing backend that targets the SystemTAP
implementation of DTrace userspace tracing. The core functionality
should be applicable and standard across any DTrace implementation
on Solaris, OS-X, *BSD, but the Makefile rules will likely need
some small additional changes to cope with OS specific build
requirements.
This backend builds a little differently from the other tracing
backends. Specifically there is no 'trace.c' file, because the
'dtrace' command line tool generates a '.o' file directly from
the dtrace probe definition file. The probe definition is usually
named with a '.d' extension but QEMU uses '.d' files for its
external makefile dependancy tracking, so this uses '.dtrace' as
the extension for the probe definition file.
The 'tracetool' program gains the ability to generate a trace.h
file for DTrace, and also to generate the trace.d file containing
the dtrace probe definition.
Example usage of a dtrace probe in systemtap looks like:
probe process("qemu").mark("qemu_malloc") {
printf("Malloc %d %p\n", $arg1, $arg2);
}
* .gitignore: Ignore trace-dtrace.*
* Makefile: Extra rules for generating DTrace files
* Makefile.obj: Don't build trace.o for DTrace, use
trace-dtrace.o generated by 'dtrace' instead
* tracetool: Support for generating DTrace data files
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add support for the spice audio interface. With this patch applied
audio can be forwarded over the network from/to the spice client. Both
recording and playback is supported.
The driver is first in the driver list, but the can_be_default flag is
set only in case spice is active. So if you have the spice protocol
enabled the spice audio driver is the default one, otherwise whatever
comes first after spice in the list. Overriding the default using
QEMU_AUDIO_DRV works in any case.
[ v2: audio codestyle: add spaces before open parenthesis ]
[ v2: add const to silence array ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: malc <av1474@comtv.ru>
Signed-off-by: malc <av1474@comtv.ru>
This patch adds three devices to qemu:
intel-hda
Intel HD Audio Controller, the PCI device. Provides a HDA bus.
Emulates ICH6 at the moment. Adding a ICH9 PCIE
variant shouldn't be hard.
hda-duplex
HDA Codec. Attaches to the HDA bus. Supports 16bit stereo,
rates 16k -> 96k, playback, recording and volume control
(with CONFIG_MIXEMU=y).
hda-output
HDA Codec without recording support. Subset of the hda-duplex
codec. Use this if you don't want your guests access your mic.
Usage: add '-device intel-hda -device hda-duplex' to your command line.
Tested guests:
* Linux works.
* Win7 works.
* DOS (mpxplay) works.
* WinXP doesn't work.
[ v2 changes ]
* Fixed endianess, big endian hosts work now.
* Fixed some emulation bugs.
* Added immediate command emulation.
* Added vmstate support.
* Make it behave like all other sound card drivers:
- can be configured via '--audio-card-list=hda'
- can be added to a VM using '-soundhw hda'
* Code style fixups.
* Zapped guest-triggerable asserts.
* Handle partial reads/writes of audio data correctly.
Cc: malc <av1474@comtv.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
This moves library functions used by both QEMU and the QEMU tools,
such as qemu-img, qemu-nbd etc. from osdep.c to oslib-{posix,win32}.c
In addition it introduces oslib-obj.y to the Makefile set to be
included by the various targets, instead of relying on these library
functions magically getting included via block-obj-y.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All files include qemu-options.h which pulls in qemu-options.def from
the root directory. Thus generating qemu-options.def from Makefile.objs
under the target directory is not effective.
Further, people expect .def file to get cleaned with make clean:
it does not have state so no reason to defer removing it
until distclean. Also add a rule to remove old files that might
be around.
This fixes the error: ‘QEMU_OPTION_spice’ undeclared
(first use in this function) error that some people reported
which is really down to an out of date .def file.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move timer init functions to a new file, qemu-timer-common.c. Make other
critical timer functions inlined to preserve performance in
qemu-timer.c, also move muldiv64() (used by the inline functions)
to qemu-timer.h.
Adjust block/raw-posix.c and simpletrace.c to use get_clock() directly.
Remove a similar/duplicate definition in qemu-tool.c.
Adjust hw/omap_clk.c to include qemu-timer.h because muldiv64() is used
there.
After this change, tracing can be used also for user code and
simpletrace on Win32.
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Port qemu-kvm's signalfd compat code.
commit 5a7fdd0abd7cd24dac205317a4195446ab8748b5
Author: Anthony Liguori <aliguori@us.ibm.com>
Date: Wed May 7 11:55:47 2008 -0500
Use signalfd() in io-thread
This patch reworks the IO thread to use signalfd() instead of sigtimedwait()
This will eliminate the need to use SIGIO everywhere.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We would need this to make sure we handle the mapped
security model correctly for different xattr names.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Implement TI x3130 pcie downstream port switch.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement TI x3130 pcie upstream port switch.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implements pcie root port switch in intel X58 ioh
whose device id is 0x3420.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
define struct PCIEPort which represents common part
of pci express port.(root, upstream and downstream.)
add a helper function for pcie port which can be used commonly by
root/upstream/downstream port.
define struct PCIESlot which represents common part of
pcie slot.(root and downstream.) and helper functions for it.
helper functions for chassis, slot -> PCIESlot conversion.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add QEMU version information to the executables, based on earlier
work by C. W. Betts and Robert Riebisch.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
With that patch applied you'll actually see the guests screen in the
spice client. This does *not* bring qxl and full spice support though.
This is basically the qxl vga mode made more generic, so it plays
together with any qemu-emulated gfx card. You can display stdvga or
cirrus via spice client. You can have both vnc and spice enabled and
clients connected at the same time.
Open keyboard channel. Now you can type into the spice client and the
keyboard events are sent to your guest. You'll need some other display
like vnc to actually see the guest responding to them though.
Add -spice command line switch. Has support setting passwd and port for
now. With this patch applied the spice client can successfully connect
to qemu. You can't do anything useful yet though.
The blkverify block driver makes investigating image format data
corruption much easier. A raw image initialized with the same contents
as the test image (e.g. qcow2 file) must be provided. The raw image
mirrors read/write operations and is used to verify that data read from
the test image is correct.
See docs/blkverify.txt for more information.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a simple tracer which produces binary trace files. To
try out the simple backend:
$ ./configure --trace-backend=simple
$ make
After running QEMU you can pretty-print the trace:
$ ./simpletrace.py trace-events trace.log
The output of simpletrace.py looks like this:
qemu_realloc 0.699 ptr=0x24363f0 size=0x3 newptr=0x24363f0
qemu_free 0.768 ptr=0x24363f0
^ ^---- timestamp delta (us)
|____ trace event name
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
trace: Make trace record fields 64-bit
Explicitly use 64-bit fields in trace records so that timestamps and
magic numbers work for 32-bit host builds.
Includes fixes from Prerna Saxena <prerna@linux.vnet.ibm.com>.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch introduces the trace-events file where trace events can be
declared like so:
qemu_malloc(size_t size) "size %zu"
qemu_free(void *ptr) "ptr %p"
These trace event declarations are processed by a new tool called
tracetool to generate code for the trace events. Trace event
declarations are independent of the backend tracing system (LTTng User
Space Tracing, ftrace markers, DTrace).
The default "nop" backend generates empty trace event functions.
Therefore trace events are disabled by default.
The trace-events file serves two purposes:
1. Adding trace events is easy. It is not necessary to understand the
details of a backend tracing system. The trace-events file is a
single location where trace events can be declared without code
duplication.
2. QEMU is not tightly coupled to one particular backend tracing system.
In order to support tracing across QEMU host platforms and to
anticipate new backend tracing systems that are currently maturing,
it is important to be flexible and not tied to one system.
This commit includes fixes from Prerna Saxena
<prerna@linux.vnet.ibm.com> and Blue Swirl <blauwirbel@gmail.com>.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Implement a threaded VNC server using the producer-consumer model.
The main thread will push encoding jobs (a list a rectangles to update)
in a queue, and the VNC worker thread will consume that queue and send
framebuffer updates to the output buffer.
The threaded VNC server can be enabled with ./configure --enable-vnc-thread.
If you don't want it, just use ./configure --disable-vnc-thread and a syncrhonous
queue of job will be used (which as exactly the same behavior as the old queue).
If you disable the VNC thread, all thread related code will not be built and there will
be no overhead.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Profiling with callgrind seems to show that a lot of time is spent
in the palette code (mostly due to memory allocation and qdict to int
conversion).
This patch adds a VncPalette implementation. The palette is stored
in a hash table, like qdict, but which does way less memory allocations,
and doesn't suffer from the QObject overhead.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For the same reason that we don't use vnc-authentication-sasl.c but
vnc-auth-sals.c. Because it's tooooo long.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move sdl, vnc, curses and cocoa UI into ui/ to cleanup
the root directory. Also remove some unnecessary explicit
targets from Makefile.
aliguori: fix build when srcdir != objdir
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move pci bridge related code into pci_bridge.c from pci.c
for further enhancement. pci.c is big enough now, so split it out.
No code change but exporting some accesser functions.
In fact, few pci bridge functions stays in pci.c.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Sheepdog is a distributed storage system for QEMU. It provides highly
available block level storage volumes to VMs like Amazon EBS. This
patch adds a qemu block driver for Sheepdog.
Sheepdog features are:
- No node in the cluster is special (no metadata node, no control
node, etc)
- Linear scalability in performance and capacity
- No single point of failure
- Autonomous management (zero configuration)
- Useful volume management support such as snapshot and cloning
- Thin provisioning
- Autonomous load balancing
The more details are available at the project site:
http://www.osrg.net/sheepdog/
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds required infrastructure for the new security model.
- A new configure option for attr/xattr.
- if CONFIG_VIRTFS will be defined if both CONFIG_LINUX and CONFIG_ATTR defined.
- Defines routines related to both security models.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce OS specific cmdline argument handling by calling
os_parse_cmd_args() at the end of switch() statement. Move option
enum to qemu-options.h and have it included from os-posix.c and
os-win32.c in addition to vl.c.
In addition move SMB argument to os-posix.c
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Rename qemu-options.h to qemu-options.def as it is not a header file
for general use and this leaves space for a proper qemu-options.h
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introcuce os-posix.c and move posix specific signal handling
there.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This introduces os-win32.c. It is meant to carry win32 specific
functions thata are not relevant for all of QEMU as well as win32
versions of various pieces like signal handling etc.
Move win32 polling handler helper functions from vl.c to os-win32.c
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Anything that moves hundreds of lines out of vl.c can't be all bad.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add support for tight encoding [1]. This patch only add support
for "basic" tight compression without any filter.
[1] http://tigervnc.org/cgi-bin/rfbproto#tight-encoding.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a new cursor type to console.h and a bunch of functions to
deal with cursors the (new) cursor.c file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch creates a new command line option named -fsdev to hold any file
system specific information.
The option will currently hold the following attributes:
-fsdev fstype id=id,path=path_to_share
where
fstype: Type of the file system.
id: Identifier used to refer to this fsdev
path: The path on the host that is identified by this fsdev.
[aneesh.kumar@linux.vnet.ibm.com: Abstraction using FsContext]
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will allow to implement new encodings (tight, zrle, ..)
in a cleaner way. This may hurt performances, because some
functions like vnc_convert_pixel are not static anymore, but
should not be a problem with gcc 4.5 and the new -flto.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We're running into various problems because the "raw" file access, which
is used internally by the various image formats is entangled with the
"raw" image format, which maps the VM view 1:1 to a file system.
This patch renames the raw file backends to the file protocol which
is treated like other protocols (e.g. nbd and http) and adds a new
"raw" image format which is just a wrapper around calls to the underlying
protocol.
The patch is surprisingly simple, besides changing the probing logical
in block.c to only look for image formats when using bdrv_open and
renaming of the old raw protocols to file there's almost nothing in there.
For creating images, a new bdrv_create_file is introduced which guesses the
protocol to use. This allows using qemu-img create -f raw (or just using the
default) for both files and host devices. Converting the other format drivers
to use this function to create their images is left for later patches.
The only issues still open are in the handling of the host devices.
Firstly in current qemu we can specifiy the host* format names
on various command line acceping images, but the new code can't
do that without adding some translation. Second the layering breaks
the no_zero_init flag in the BlockDriver used by qemu-img. I'm not
happy how this is done per-driver instead of per-state so I'll
prepare a separate patch to clean this up.
There's some more cleanup opportunity after this patch, e.g. using
separate lists and registration functions for image formats vs
protocols and maybe even host drivers, but this can be done at a
later stage.
Also there's a check for protocol in bdrv_open for the BDRV_O_SNAPSHOT
case that I don't quite understand, but which I fear won't work as
expected - possibly even before this patch.
Note that this patch requires various recent block patches from Kevin
and me, which should all be in his block queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The virtio-net code uses iov_fill() which fills an iov from a linear
buffer. The virtio-serial-bus code does something similar in an
open-coded function.
Create a new iov.c file that has iov_from_buf().
Convert virtio-net and virtio-serial-bus over to use this functionality.
virtio-net used ints to hold sizes, the new function is going to use
size_t types.
Later commits will add the opposite functionality -- going from an iov
to a linear buffer.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To be able to use config files for blkdebug, we need to make these functions
available in the tools. This involves moving two functions that can only be
built in the context of the emulator.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This isn't doing anything interesting. It creates the blkdebug block driver as
a protocol which just passes everything through to raw.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
use empty_slot device for the RAM which is not installed
Models without ECC don't trap when missing ram is accessed.
v0->v1 compile only once and fix indentation
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make vl.o compiled per target and fix a thinko in hw/acpi.c. It's not trivial
to make kvm.h consumable by compiled-once files.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Arrange various declarations so that also non-CPU code can access
them, adjust users.
Move CPU specific code to cpus.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move target specific functions and RAM handling to arch_init.c.
Add a flag to QEMUOptions structure to indicate for which
architectures the option is allowed, check the flag
in run time and remove conditional code in option handling.
Now that no target dependencies remain, compile vl.c only once
for all targets.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make win2k install hack unconditional as it is still restricted to
x86 only in vl.c.
Replace TARGET_PAGE_SIZE and 4096 with PAGE_SIZE.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
As soon as virtio-pci.c gets compiled and used on S390 the internal qdev magic
gets confused and tries to give us PCI devices instead of S390 virtio devices.
Since we don't have PCI on S390, we can safely not compile virtio-pci at all.
In order to do this I added a new config option "CONFIG_VIRTIO_PCI" that I
enabled for every platform except S390. Thanks to this the change should be a
complete nop for every other platform.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Convert pci_host_conf_register_mmio_noswap(x) to
pci_host_conf_register_mmio(x, 0).
Convert pci_host_conf_register_mmio(x) to
pci_host_conf_register_mmio(x, 1) for big endian hosts, all cases
happen to be BE.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Notifiers are data-less callbacks and a notifier list is a list of registered
notifiers that all are interested in a particular event.
We'll use this in a few patches to implement mouse change notification.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- Do not do memory allocations by placing list nodes in notifier
This file was renamed to ease the reviews of the recent changes
that went in.
Now that the changes are done, rename the file back to its original
name.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There's nothing target-dependent in the virtio-serial code so allow it
to be compiled just once for all the targets.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move 200 lines out of vl.c already into common code that only needs to
be compiled once.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan has contributed a cool Makefile infrastructure that enables us to drop
static libraries completely:
Move shared obj-y definitions to Makefile.objs, prefixed {common-,hw-,user-},
and link those object files directly into the executables.
Replace HWLIB by HWDIR, specifying only the directory.
Drop --whole-archive and ARLIBS in Makefiles and configure.
Drop GENERATED_HEADERS dependency in rules.mak, since this rebuilds all
common objects after generating a target-specific header; add dependency
rules to Makefile and Makefile.target instead.
v2:
- Don't try to include /config.mak for user emulators
- Changes to user object paths ("Quickfix for libuser.a drop") were obsoleted
by "user_only: compile everything with -fpie" (Kirill A. Shutemov)
v3:
- Fix dependency modelling for tools
- Remove comment on GENERATED_HEADERS obsoleted by this patch
Signed-off-by: Andreas Färber <afaerber@opensolaris.org>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Palle Lyckegaard <palle@lyckegaard.dk>
Cc: Ben Taylor <bentaylor.solx86@gmail.com>
Cc: Juan Quintela <quintela@trasno.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
