Implement the following PowerISA v3.1 instructions:
xxmfacc: VSX Move From Accumulator
xxmtacc: VSX Move To Accumulator
xxsetaccz: VSX Set Accumulator to Zero
The PowerISA 3.1 mentions that for the current version of the
architecture, "the hardware implementation provides the effect of ACC[i]
and VSRs 4*i to 4*i + 3 logically containing the same data" and "The
Accumulators introduce no new logical state at this time" (page 501).
For now it seems unnecessary to create new structures, so this patch
just uses ACC[i] as VSRs 4*i to 4*i+3 and therefore move to and from
accumulators are no-ops.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220524140537.27451-2-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This allows an x86 host to no-op lwsyncs, and ppc host can use lwsync
rather than sync.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220519135908.21282-5-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
According to Power ISA, the FI bit in FPSCR is non-sticky.
This means that if an instruction is said to modify the FI bit, then
it should be set or cleared depending on the result of the
instruction. Otherwise, it should be kept as was before.
However, the following inconsistency was found when comparing results
from the hardware (tested on both a Power 9 processor and in
Power 10 Mambo):
(FI bit is set before the execution of the instruction)
Hardware: xscmpeqdp(0xff..ff, 0xff..ff) = FI: SET -> SET
QEMU: xscmpeqdp(0xff..ff, 0xff..ff) = FI: SET -> CLEARED
As the FI bit is non-sticky, and xscmpeqdp does not list it as a field
that is changed by the instruction, it should not be changed after its
execution.
This is happening to multiple instructions in the vsx implementations.
If the ISA does not list the FI bit as altered for a particular
instruction, then it should be kept as it was before the instruction.
QEMU is not following this behavior. Affected instructions include:
- xv* (all vsx-vector instructions);
- xscmp*, xsmax*, xsmin*;
- xstdivdp and similars;
(to identify the affected instructions, just search in the ISA for
the instructions that does not list FI in "Special Registers Altered")
Most instructions use the function do_float_check_status() to commit
changes in the inexact flag. So the fix is to add a parameter to it
that will control if the bit FI should be changed or not.
All users of do_float_check_status() are then modified to provide this
argument, controlling if that specific instruction changes bit FI or
not.
Some macro helpers are responsible for both instructions that change
and instructions that aren't suposed to change FI. This seems to always
overlap with the sfprf flag. So, reuse this flag for this purpose when
applicable.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517161522.36132-2-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Today we have the issue where MSR_* values are the 'inverted order'
bit numbers from what the ISA specifies. e.g. MSR_LE is bit 63 but
is defined as 0 in QEMU.
Add a macro to be used to convert from QEMU order to ISA order.
This solution requires less changes than to use the already defined
PPC_BIT macro, which would turn MSR_* in masks instead of the numbers
itself.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-23-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add FIELDs macros for msr bits that had an unused msr_* before.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-22-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_de macro hides the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-21-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_hv macro hides the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-20-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ts macro hides the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-19-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_fe0 and msr_fe1 macros hide the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-18-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ep macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-17-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_dr macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-16-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ir macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-15-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_cm macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-14-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_fp macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-13-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_gs macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-12-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_me macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-11-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_pow macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-10-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ce macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-9-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ee macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-8-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ile macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-7-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ds macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-6-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_le macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-5-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_pr macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-4-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some msr_* macros are not used anywhere. Remove them as part of
the work to remove all hidden usage of *env.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220504210541.115256-3-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
fpscr_* defined macros are hiding the usage of *env behind them.
Substitute the usage of these macros with `env->fpscr & FP_*` to make
the code cleaner.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220504210541.115256-2-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
The types are no longer used in bswap.h since commit
f930224fff ("bswap.h: Remove unused float-access functions"), there
isn't much sense in keeping it there and having a dependency on fpu/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-29-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
This patch adds the EBB exception support that are triggered by
Performance Monitor alerts. This happens when a Performance Monitor
alert occurs and MMCR0_EBE, BESCR_PME and BESCR_GE are set.
fire_PMC_interrupt() will execute the raise_ebb_perfm_exception() helper
which will check for MMCR0_EBE, BESCR_PME and BESCR_GE bits. If all bits
are set, do_ebb() will attempt to trigger a PERFM EBB event.
If the EBB facility is enabled in both FSCR and HFSCR we consider that
the EBB is valid and set BESCR_PMEO. After that, if we're running in
problem state, fire a POWERPC_EXCP_PERM_EBB immediately. Otherwise we'll
queue a PPC_INTERRUPT_EBB.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225101140.1054160-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
PPC_INTERRUPT_EBB is a new interrupt that will be used to deliver EBB
exceptions that had to be postponed because the thread wasn't in problem
state at the time the event-based branch was supposed to occur.
ISA 3.1 also defines two EBB exceptions: Performance Monitor EBB
exception and External EBB exception. They are being added as
POWERPC_EXCP_PERFM_EBB and POWERPC_EXCP_EXTERNAL_EBB.
PPC_INTERRUPT_EBB will check BESCR bits to see the EBB type that
occurred and trigger the appropriate exception. Both exceptions are
doing the same thing in this first implementation: clear BESCR_GE and
enter the branch with env->nip retrieved from SPR_EBBHR.
The checks being done by the interrupt code are msr_pr and BESCR_GE
states. All other checks (EBB facility check, BESCR_PME bit, specific
bits related to the event type) must be done beforehand.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220225101140.1054160-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
These will need to be accessed from other files once we move the CPUs
code to separate files.
The check_pow_hid0 and check_pow_hid0_74xx are too specific to be
moved to a header so I'll deal with them later when splitting this
code between the multiple CPU families.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-27-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce virtual hypervisor methods that can support a "Nested KVM HV"
implementation using the bare metal 2-level radix MMU, and using HV
exceptions to return from H_ENTER_NESTED (rather than cause interrupts).
HV exceptions can now be raised in the TCG spapr machine when running a
nested KVM HV guest. The main ones are the lev==1 syscall, the hdecr,
hdsi and hisi, hv fu, and hv emu, and h_virt external interrupts.
HV exceptions are intercepted in the exception handler code and instead
of causing interrupts in the guest and switching the machine to HV mode,
they go to the vhyp where it may exit the H_ENTER_NESTED hcall with the
interrupt vector numer as return value as required by the hcall API.
Address translation is provided by the 2-level page table walker that is
implemented for the bare metal radix MMU. The partition scope page table
is pointed to the L1's partition scope by the get_pate vhc method.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220216102545.1808018-9-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In prepartion for implementing a full partition table option for
vhyp, update the get_pate method to take an lpid and return a
success/fail indicator.
The spapr implementation currently just asserts lpid is always 0
and always return success.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch fixes ]
Message-Id: <20220216102545.1808018-6-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PowerPC 601 processor is the first generation of processors to
implement the PowerPC architecture. It was designed as a bridge
processor and also could execute most of the instructions of the
previous POWER architecture. It was found on the first Macs and IBM
RS/6000 workstations.
There is not much interest in keeping the CPU model of this
POWER-PowerPC bridge processor. We have the 603 and 604 CPU models of
the 60x family which implement the complete PowerPC instruction set.
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203142756.1302515-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 602 was derived from the PowerPC 603, for the gaming market it
seems. It was hardly used and no firmware supporting the CPU could be
found. Drop support.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Bit 13 is the Wait State Enable bit. Give it its proper name.
As far as I can see we don't do anything with MSR_POW for the 405, so
this change has no effect.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220118184448.852996-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Commit c8f49e6b93 ("target/ppc: remove 401/403 CPUs") left a few
things behind.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220117091541.1615807-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220118104150.1899661-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Some CPUs set ILE via an MSR bit. We can make
ppc_interrupts_little_endian handle that case as well. Now we have a
centralized way of determining the endianness of interrupts.
This change has no functional impact.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The ppc_interrupts_little_endian function could be used for interrupts
delivered in Hypervisor mode, so add support for powernv8 and powernv9
to it.
Also drop the comment because it is inaccurate, all CPUs that can run
little endian can have interrupts in little endian. The point is
whether they can take interrupts in an endianness different from
MSR_LE.
This change has no functional impact.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is the combination of frozen bit and counter type, on a per
counter basis. So far this is only used by HFLAGS_INSN_CNT, but
will be used more later.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[danielhb: fixed PMC4 cyc_cnt shift, insn run latch code,
MMCR0_FC handling, "PMC[1-6]" comment]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220103224746.167831-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 405 timers were broken when booke support was added. Assumption
was made that the register numbers were the same but it's not :
SPR_BOOKE_TSR (0x150)
SPR_BOOKE_TCR (0x154)
SPR_40x_TSR (0x3D8)
SPR_40x_TCR (0x3DA)
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: ddd1055b07 ("PPC: booke timers")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211222064025.1541490-5-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220103063441.3424853-6-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
An Event-Based Branch (EBB) allows applications to change the NIA when a
event-based exception occurs. Event-based exceptions are enabled by
setting the Branch Event Status and Control Register (BESCR). If the
event-based exception is enabled when the exception occurs, an EBB
happens.
The following operations happens during an EBB:
- Global Enable (GE) bit of BESCR is set to 0;
- bits 0-61 of the Event-Based Branch Return Register (EBBRR) are set
to the the effective address of the NIA that would have executed if the EBB
didn't happen;
- Instruction fetch and execution will continue in the effective address
contained in the Event-Based Branch Handler Register (EBBHR).
The EBB Handler will process the event and then execute the Return From
Event-Based Branch (rfebb) instruction. rfebb sets BESCR_GE and then
redirects execution to the address pointed in EBBRR. This process is
described in the PowerISA v3.1, Book II, Chapter 6 [1].
This patch implements the rfebb instruction. Descriptions of all
relevant BESCR bits are also added - this patch is only using BESCR_GE,
but the next patches will use the remaining bits.
[1] https://wiki.raptorcs.com/w/images/f/f5/PowerISA_public.v3.1.pdf
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211201151734.654994-9-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
PM_RUN_INST_CMPL, instructions completed with the run latch set, is
the architected PowerISA v3.1 event defined with PMC4SEL = 0xFA.
Implement it by checking for the CTRL RUN bit before incrementing the
counter. To make this work properly we also need to force a new
translation block each time SPR_CTRL is written. A small tweak in
pmu_increment_insns() is then needed to only increment this event
if the thread has the run latch.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211201151734.654994-8-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PMU is already counting cycles by calculating time elapsed in
nanoseconds. Counting instructions is a different matter and requires
another approach.
This patch adds the capability of counting completed instructions (Perf
event PM_INST_CMPL) by counting the amount of instructions translated in
each translation block right before exiting it.
A new pmu_count_insns() helper in translation.c was added to do that.
After verifying that the PMU is counting instructions, call
helper_insns_inc(). This new helper from power8-pmu.c will add the
instructions to the relevant counters. It'll also be responsible for
triggering counter negative overflows as it is already being done with
cycles.
To verify whether the PMU is counting instructions or now, a new hflags
named 'HFLAGS_INSN_CNT' is introduced. This flag will match the internal
state of the PMU. We're be using this flag to avoid calling
helper_insn_inc() when we do not have a valid instruction event being
sampled.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211201151734.654994-7-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
