The bit FI fix used the sfprf flag as a flag for the set_fi parameter
in do_float_check_status where applicable. Now, this patch rename this
flag to sfifprf to state this dual usage.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Message-Id: <20220517161522.36132-4-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch fixes another not-so-clear situation in Power ISA
regarding the inexact bits in FPSCR. The ISA states that:
"""
When Overflow Exception is disabled (OE=0) and an
Overflow Exception occurs, the following actions are
taken:
...
2. Inexact Exception is set
XX <- 1
...
FI is set to 1
...
"""
However, when tested on a Power 9 hardware, some instructions that
trigger an OX don't set the FI bit:
xvcvdpsp(0x4050533fcdb7b95ff8d561c40bf90996) = FI: CLEARED -> CLEARED
xvnmsubmsp(0xf3c0c1fc8f3230, 0xbeaab9c5) = FI: CLEARED -> CLEARED
(just a few examples. Other instructions are also affected)
The root cause for this seems to be that only instructions that list
the bit FI in the "Special Registers Altered" should modify it.
QEMU is, today, not working like the hardware:
xvcvdpsp(0x4050533fcdb7b95ff8d561c40bf90996) = FI: CLEARED -> SET
xvnmsubmsp(0xf3c0c1fc8f3230, 0xbeaab9c5) = FI: CLEARED -> SET
(all tests assume FI is cleared beforehand)
Fix this by making float_overflow_excp() return float_flag_inexact
if it should update the inexact flags.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Message-Id: <20220517161522.36132-3-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
According to Power ISA, the FI bit in FPSCR is non-sticky.
This means that if an instruction is said to modify the FI bit, then
it should be set or cleared depending on the result of the
instruction. Otherwise, it should be kept as was before.
However, the following inconsistency was found when comparing results
from the hardware (tested on both a Power 9 processor and in
Power 10 Mambo):
(FI bit is set before the execution of the instruction)
Hardware: xscmpeqdp(0xff..ff, 0xff..ff) = FI: SET -> SET
QEMU: xscmpeqdp(0xff..ff, 0xff..ff) = FI: SET -> CLEARED
As the FI bit is non-sticky, and xscmpeqdp does not list it as a field
that is changed by the instruction, it should not be changed after its
execution.
This is happening to multiple instructions in the vsx implementations.
If the ISA does not list the FI bit as altered for a particular
instruction, then it should be kept as it was before the instruction.
QEMU is not following this behavior. Affected instructions include:
- xv* (all vsx-vector instructions);
- xscmp*, xsmax*, xsmin*;
- xstdivdp and similars;
(to identify the affected instructions, just search in the ISA for
the instructions that does not list FI in "Special Registers Altered")
Most instructions use the function do_float_check_status() to commit
changes in the inexact flag. So the fix is to add a parameter to it
that will control if the bit FI should be changed or not.
All users of do_float_check_status() are then modified to provide this
argument, controlling if that specific instruction changes bit FI or
not.
Some macro helpers are responsible for both instructions that change
and instructions that aren't suposed to change FI. This seems to always
overlap with the sfprf flag. So, reuse this flag for this purpose when
applicable.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517161522.36132-2-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 74c4912f09 changed check_tlb_flush() to use
tlb_flush_all_cpus_synced() instead of calling tlb_flush() on each
CPU. However, as side effect of this, a CPU executing a ptesync
after a tlbie will have its TLB flushed only after exiting its
current Translation Block (TB).
This causes memory accesses to invalid pages to succeed, if they
happen to be on the same TB as the ptesync.
To fix this, use tlb_flush_all_cpus() instead, that immediately
flushes the TLB of the CPU executing the ptesync instruction.
Fixes: 74c4912f09 ("target/ppc: Fix synchronization of mttcg with broadcast TLB flushes")
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220503163904.22575-1-leandro.lupori@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We commonly define the header guard symbol without an explicit value.
Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-4-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Macros should be ALL_CAPS. Normalize the exception.
Done with scripts/clean-header-guards.pl.
include/hw/xen/interface/ and tools/virtiofsd/ left alone, because
these were imported from Xen and libfuse respectively.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Capstone should be superior to the old libopcode disassembler,
so we can drop the old file nowadays.
Message-Id: <20220505173619.488350-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Today we have the issue where MSR_* values are the 'inverted order'
bit numbers from what the ISA specifies. e.g. MSR_LE is bit 63 but
is defined as 0 in QEMU.
Add a macro to be used to convert from QEMU order to ISA order.
This solution requires less changes than to use the already defined
PPC_BIT macro, which would turn MSR_* in masks instead of the numbers
itself.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-23-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add FIELDs macros for msr bits that had an unused msr_* before.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-22-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_de macro hides the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-21-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_hv macro hides the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-20-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ts macro hides the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-19-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_fe0 and msr_fe1 macros hide the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-18-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ep macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-17-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_dr macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-16-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ir macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-15-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_cm macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-14-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_fp macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-13-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_gs macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-12-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_me macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-11-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_pow macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-10-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ce macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-9-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ee macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-8-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ile macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-7-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ds macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-6-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_le macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-5-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_pr macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-4-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some msr_* macros are not used anywhere. Remove them as part of
the work to remove all hidden usage of *env.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220504210541.115256-3-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
fpscr_* defined macros are hiding the usage of *env behind them.
Substitute the usage of these macros with `env->fpscr & FP_*` to make
the code cleaner.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220504210541.115256-2-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Per E500 core reference manual [1], chapter 8.4.4 "Branch Taken Debug
Event" and chapter 8.4.5 "Instruction Complete Debug Event":
"A branch taken debug event occurs if both MSR[DE] and DBCR0[BRT]
are set ... Branch taken debug events are not recognized if MSR[DE]
is cleared when the branch instruction executes."
"An instruction complete debug event occurs when any instruction
completes execution so long as MSR[DE] and DBCR0[ICMP] are both
set ... Instruction complete debug events are not recognized if
MSR[DE] is cleared at the time of the instruction execution."
Current codes do not check MSR.DE bit before setting HFLAGS_SE and
HFLAGS_BE flag, which would cause the immediate debug interrupt to
be generated, e.g.: when DBCR0.ICMP bit is set by guest software
and MSR.DE is not set.
[1] https://www.nxp.com/docs/en/reference-manual/E500CORERM.pdf
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Lucas Mateus Castro <lucas.araujo@eldorado.org.br>
Message-Id: <20220421011729.1148727-1-bmeng.cn@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Init the struct to avoid Valgrind complaints about unitialized bytes,
such as this one:
==39549== Syscall param ioctl(generic) points to uninitialised byte(s)
==39549== at 0x55864E4: ioctl (in /usr/lib64/libc.so.6)
==39549== by 0xD1F7EF: kvm_vm_ioctl (kvm-all.c:3035)
==39549== by 0xAF8F5B: kvm_get_radix_page_info (kvm.c:276)
==39549== by 0xB00533: kvmppc_host_cpu_class_init (kvm.c:2369)
==39549== by 0xD3DCE7: type_initialize (object.c:366)
==39549== by 0xD3FACF: object_class_foreach_tramp (object.c:1071)
==39549== by 0x502757B: g_hash_table_foreach (in /usr/lib64/libglib-2.0.so.0.7000.5)
==39549== by 0xD3FC1B: object_class_foreach (object.c:1093)
==39549== by 0xB0141F: kvm_ppc_register_host_cpu_type (kvm.c:2613)
==39549== by 0xAF87E7: kvm_arch_init (kvm.c:157)
==39549== by 0xD1E2A7: kvm_init (kvm-all.c:2595)
==39549== by 0x8E6E93: accel_init_machine (accel-softmmu.c:39)
==39549== Address 0x1fff00e208 is on thread 1's stack
==39549== in frame #2, created by kvm_get_radix_page_info (kvm.c:267)
==39549== Uninitialised value was created by a stack allocation
==39549== at 0xAF8EE8: kvm_get_radix_page_info (kvm.c:267)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220331001717.616938-5-danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Init 'sregs' to avoid Valgrind complaints about uninitialized bytes
from kvmppc_put_books_sregs():
==54059== Thread 3:
==54059== Syscall param ioctl(generic) points to uninitialised byte(s)
==54059== at 0x55864E4: ioctl (in /usr/lib64/libc.so.6)
==54059== by 0xD1FA23: kvm_vcpu_ioctl (kvm-all.c:3053)
==54059== by 0xAFB18B: kvmppc_put_books_sregs (kvm.c:891)
==54059== by 0xAFB47B: kvm_arch_put_registers (kvm.c:949)
==54059== by 0xD1EDA7: do_kvm_cpu_synchronize_post_init (kvm-all.c:2766)
==54059== by 0x481AF3: process_queued_cpu_work (cpus-common.c:343)
==54059== by 0x4EF247: qemu_wait_io_event_common (cpus.c:412)
==54059== by 0x4EF343: qemu_wait_io_event (cpus.c:436)
==54059== by 0xD21E83: kvm_vcpu_thread_fn (kvm-accel-ops.c:54)
==54059== by 0xFFEBF3: qemu_thread_start (qemu-thread-posix.c:556)
==54059== by 0x54E6DC3: start_thread (in /usr/lib64/libc.so.6)
==54059== by 0x5596C9F: clone (in /usr/lib64/libc.so.6)
==54059== Address 0x799d1cc is on thread 3's stack
==54059== in frame #2, created by kvmppc_put_books_sregs (kvm.c:851)
==54059== Uninitialised value was created by a stack allocation
==54059== at 0xAFAEB0: kvmppc_put_books_sregs (kvm.c:851)
This happens because Valgrind does not consider the 'sregs'
initialization done by kvm_vcpu_ioctl() at the end of the function.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220331001717.616938-4-danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
'lpcr' is used as an input of kvm_get_one_reg(). Valgrind doesn't
understand that and it returns warnings as such for this function:
==55240== Thread 1:
==55240== Conditional jump or move depends on uninitialised value(s)
==55240== at 0xB011E4: kvmppc_enable_cap_large_decr (kvm.c:2546)
==55240== by 0x92F28F: cap_large_decr_cpu_apply (spapr_caps.c:523)
==55240== by 0x930C37: spapr_caps_cpu_apply (spapr_caps.c:921)
==55240== by 0x955D3B: spapr_reset_vcpu (spapr_cpu_core.c:73)
==55240== by 0x95612B: spapr_cpu_core_reset (spapr_cpu_core.c:209)
==55240== by 0x95619B: spapr_cpu_core_reset_handler (spapr_cpu_core.c:218)
==55240== by 0xD3605F: qemu_devices_reset (reset.c:69)
==55240== by 0x92112B: spapr_machine_reset (spapr.c:1641)
==55240== by 0x4FBD63: qemu_system_reset (runstate.c:444)
==55240== by 0x62812B: qdev_machine_creation_done (machine.c:1247)
==55240== by 0x5064C3: qemu_machine_creation_done (vl.c:2725)
==55240== by 0x5065DF: qmp_x_exit_preconfig (vl.c:2748)
==55240== Uninitialised value was created by a stack allocation
==55240== at 0xB01158: kvmppc_enable_cap_large_decr (kvm.c:2540)
Init 'lpcr' to avoid this warning.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220331001717.616938-3-danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Valgrind isn't convinced that we are initializing the values we assign
to env->spr[spr] because it doesn't understand that the 'val' union is
being written by the kvm_vcpu_ioctl() that follows (via struct
kvm_one_reg).
This results in Valgrind complaining about uninitialized values every
time we use env->spr in a conditional, like this instance:
==707578== Thread 1:
==707578== Conditional jump or move depends on uninitialised value(s)
==707578== at 0xA10A40: hreg_compute_hflags_value (helper_regs.c:106)
==707578== by 0xA10C9F: hreg_compute_hflags (helper_regs.c:173)
==707578== by 0xA110F7: hreg_store_msr (helper_regs.c:262)
==707578== by 0xA051A3: ppc_cpu_reset (cpu_init.c:7168)
==707578== by 0xD4730F: device_transitional_reset (qdev.c:799)
==707578== by 0xD4A11B: resettable_phase_hold (resettable.c:182)
==707578== by 0xD49A77: resettable_assert_reset (resettable.c:60)
==707578== by 0xD4994B: resettable_reset (resettable.c:45)
==707578== by 0xD458BB: device_cold_reset (qdev.c:296)
==707578== by 0x48FBC7: cpu_reset (cpu-common.c:114)
==707578== by 0x97B5EB: spapr_reset_vcpu (spapr_cpu_core.c:38)
==707578== by 0x97BABB: spapr_cpu_core_reset (spapr_cpu_core.c:209)
==707578== Uninitialised value was created by a stack allocation
==707578== at 0xB11F08: kvm_get_one_spr (kvm.c:543)
Initializing 'val' has no impact in the logic and makes Valgrind output
more bearable.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220331001717.616938-2-danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
This patch adds tcg accessors for 2 SPRs which were missing on P10:
- the TBU40 register is used to write the upper 40 bits of the
timebase register. It is used by kvm to update the timebase when
entering/exiting the guest on P9 and above. The missing definition was
causing erratic decrementer interrupts in a pseries/kvm guest running
in a powernv10/tcg host, typically resulting in hangs.
- the missing DPDES SPR was found through code inspection. It exists
unchanged on P10.
Both existed on previous versions of the processor and a bit of git
archaeology hints that they were added while the P10 model was already
being worked on so they may have simply fallen through the cracks.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220411125900.352028-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implement the following PowerISA v3.1 instructions:
xscvqpsqz: VSX Scalar Convert with round to zero Quad-Precision to
Signed Quadword
xscvqpuqz: VSX Scalar Convert with round to zero Quad-Precision to
Unsigned Quadword
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330175932.6995-9-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implement the following PowerISA v3.1 instructions:
xscvsqqp: VSX Scalar Convert with round Signed Quadword to
Quad-Precision
xscvuqqp: VSX Scalar Convert with round Unsigned Quadword to
Quad-Precision format
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330175932.6995-8-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
The types are no longer used in bswap.h since commit
f930224fff ("bswap.h: Remove unused float-access functions"), there
isn't much sense in keeping it there and having a dependency on fpu/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-29-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the xsmadd* insns were moved to decodetree, the helper arguments
were reordered to better match the PowerISA description. The same macro
is used to declare xvmadd* helpers, but the translation macro of these
insns was not changed accordingly.
Reported-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Fixes: e4318ab2e4 ("target/ppc: move xs[n]madd[am][ds]p/xs[n]msub[am][ds]p to decodetree")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220325111851.718966-1-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Power ISA v3.1 formalizes the previously undefined result in
words 1 and 3 to be a copy of the result in words 0 and 2.
This affects: xvcvsxdsp, xvcvuxdsp, xvcvdpsp.
And the previously undefined result in word 1 to be a copy of
the result in word 0.
This affects: xscvdpsp.
Signed-off-by: Lucas Coutinho <lucas.coutinho@eldorado.org.br>
Message-Id: <20220316200427.3410437-1-lucas.coutinho@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Power ISA v3.1 formalizes the previously undefined result in
words 1 and 3 to be a copy of the result in words 0 and 2.
This affects: xscvdpsxws, xscvdpuxws, xvcvdpsxws, xvcvdpuxws.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/852
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[ clg: checkpatch fixes ]
Message-Id: <20220315053934.377519-1-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
