hw/mpcore.c is now implementing only ARM11MPCore specific peripherals,
and is #included only from hw/arm11mpcore.c, so just merge it into that
file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the A9MP private peripheral region correctly, rather
than piggybacking on the 11MPCore code; the two CPUs are not the
same in this area.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only code left in mpcore_priv_read and mpcore_priv_write is now
the implementation of the SCU registers. Clean up by renaming functions
and removing some unnecessary conditionals to make this clearer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch to using the GIC memory regions for the CPU interface
rather than hand implementing them as a subcase of mpcore_priv_read()
and mpcore_priv_write().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Expose the ARM GIC CPU interfaces as memory regions, rather than
just providing read and write functions for them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Turn the ARM MPcore private timer/watchdog blocks into separate
qdev devices. This will allow us to share them neatly between
11MPCore and A9MPcore.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Properly implement dual-timer read/write for the sp804 dual timer module.
Based on ARM specs at
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0271d/index.html
Signed-off-by: Hans Jang <hsjang@ok-labs.com>
Signed-off-by: David Mirabito <david.mirabito@nicta.com.au>
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most QEMU files either are pure ASCII or use UTF-8.
Convert some files which still used ISO-8859-1 to UTF-8.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This function name is a bit wrong. Although it doesn't impact function, it is a bit necessary that we should fixup it.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Double semicolons should be single.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Ignore attempts to complete non-existent IRQs; this fixes a buffer
overrun if the guest writes a bad value to the GICC_EOIR register.
(This case is UNPREDICTABLE so ignoring it is a valid choice.)
Note that doing nothing if the guest writes 1023 to this register
is not in fact a change in behaviour: the old code would also
always do nothing in this case but in a non-obvious way.
(The buffer overrun was noted by Coverity, see bug 887883.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
spapr_populate_pci_devices() containd a loop with PCI_NUM_REGIONS (7)
iterations. However this overruns the 'bars' global array, which only has
6 elements. In fact we only want to run this loop for things listed in the
bars array, so this patch corrects the loop bounds to reflect that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Two of the calls to hw_error() in arm_timer.c contain the wrong function name.
As suggested by Andreas Färber, use the C99 standard __func__ macro to
get the correct name, instead of putting the name directly into the code.
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Many places in QEMU call qemu_aio_flush() to complete all pending
asynchronous I/O. Most of these places actually want to drain all block
requests but there is no block layer API to do so.
This patch introduces the bdrv_drain_all() API to wait for requests
across all BlockDriverStates to complete. As a bonus we perform checks
after qemu_aio_wait() to ensure that requests really have finished.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Xen_disk.c has support for using synchronous I/O instead of asynchronous,
but it is compiled out by default. Remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fsdriver callback that operate on file descriptor need to
differentiate between directory fd and file fd.
Based on the original patch from Sassan Panahinejad <sassan@sassan.me.uk>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
As per the 9p rfc, during TVERSION its necessary to clean all the active
fids, so that we start the session from a clean state. Its also needed in
scenarios where the guest is booting off 9p, and boot fails, and client
restarts, without any knowledge of the past, it will issue a TVERSION again
so this ensures that we always start from a clean state.
Signed-off-by: Deepak C Shetty <deepakcs@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Now when you try to migrate with VirtFS export path mounted, you get a proper QMP error:
(qemu) migrate tcp:localhost:4444
Migration is disabled when VirtFS export path '/tmp/' is mounted in the guest using mount_tag 'v_tmp'
(qemu)
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
handle fs driver require a set of newly added syscalls. Don't
Compile handle FS driver if those syscalls are not available.
Instead of adding #ifdef for all those syscalls we check for
open by handle syscall. If that is available then rest of the
syscalls used by the driver should be available.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Just for cleanliness; it would take a truly gigantic cursor to break.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
ATR size exceeding the limit is diagnosed, but then we merrily use it
anyway, overrunning card->atr[].
The message is read from a character device. Obvious security
implications unless the other end of the character device is trusted.
Spotted by Coverity. CVE-2011-4111.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I guess we can also make sure we don't call local_ioc_getversion at
all.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
According to Intel's Open Source Software Developer Manual,
the dump counters address must be Dword aligned.
The new code enforces this alignment, so s->statsaddr may now
be used with stw_le_pci_dma() and stl_le_pci_dma().
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
vdev->guest_features is not masking features that are not supported by
the guest. Fix this by introducing a common wrapper to be used by all
virtio bus implementations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Small requirements on "new" features have percolated to virtio-9p-local.c.
In particular, the utimensat wrapper actually only supports dirfd = AT_FDCWD
and flags = AT_SYMLINK_NOFOLLOW in the fallback code. Remove the arguments
so that virtio-9p-local.c will not use AT_* constants.
At the same time, fail local_ioc_getversion if the ioctl is not supported
by the host.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Also add omap_l4_region_size(), since memory API functions need
the size during initialization.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
This is a trivial wrapper around cpu_register_io_memory(), adding
no value. Inline it into all callers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
This was introduced apparently to overcome a limitation on the number of
cpu_register_io_memory() calls. 477b24ef91 (July 2008) removed use
of the hack, but retained the code. This patch removes the code as well.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrzej Zaborowski <balrogg@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>