Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230823145542.79633-5-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230823145542.79633-4-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230823145542.79633-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230823145542.79633-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For LT/GE vs zero, shift down the sign bit.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using XOR first is both smaller and more efficient,
though cannot be applied if it clobbers an input.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the carry bit to optimize some forms of setcond.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass a rexw parameter instead of duplicating the functions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass a rexw parameter instead of duplicating the functions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass a rexw parameter instead of duplicating the functions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Trivial, as we simply need to load a different constant
in the conditional move.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Trivial, as aarch64 has an instruction for this: CSETM.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The SETBC family of instructions requires exactly two insns for
all comparisions, saving 0-3 insns per (neg)setcond.
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the general case we simply negate. However with isel we
may load -1 instead of 1 with no extra effort.
Consolidate EQ0 and NE0 logic. Replace the NE0 zero-extension
with inversion+negation of EQ0, which is never worse and may
eliminate one insn. Provide a special case for -EQ0.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce a new opcode for negative setcond.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the separate defines with TCG_TARGET_HAS_extr_i64_i32,
so that the two parts of backend-specific type changing cannot
be out of sync.
Reported-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: <20230822175127.1173698-1-richard.henderson@linaro.org>
We can use MOVB and MOVW with an immediate just as easily
as with a register input.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Inserting a zero into a value, or inserting a value
into zero at offset 0 may be implemented with AND.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It is more useful to allow low-part deposits into all registers
than to restrict allocation for high-byte deposits.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Missing the segment prefix means that user-only fails
to add guest_base for some 128-bit load/store.
Fixes: 098d0fc10d ("tcg/i386: Support 128-bit load/store")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1763
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
i386 and s390x implementations of op_add2 require an earlyclobber,
which is currently missing. This breaks VCKSM in s390x guests. E.g., on
x86_64 the following op:
add2_i32 tmp2,tmp3,tmp2,tmp3,tmp3,tmp2 dead: 0 2 3 4 5 pref=none,0xffff
is translated to:
addl %ebx, %r12d
adcl %r12d, %ebx
Introduce a new C_N1_O1_I4 constraint, and make sure that earlyclobber
of aliased outputs is honored.
Cc: qemu-stable@nongnu.org
Fixes: 82790a8709 ("tcg: Add markup for output requires new register")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230719221310.1968845-7-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 20b6643324 ("tcg/ppc: Reorg goto_tb implementation") modified
goto_tb to ensure only a single instruction was patched to prevent
incorrect behavior if a thread was in the middle of multiple
instructions when they were replaced. However this introduced a race
between loading the jmp target into TCG_REG_TB and patching and
executing the direct branch.
The relevant part of the goto_tb implementation:
ld TCG_REG_TB, TARGET_ADDR_LOCATION(TCG_REG_TB)
patch_location:
mtctr TCG_REG_TB
bctr
tb_target_set_jmp_target() will replace 'patch_location' with a direct
branch if the target is in range. The direct branch now relies on
TCG_REG_TB being set up correctly by the ld. Prior to this commit
multiple instructions were patched in for the direct branch case; these
instructions would initialize TCG_REG_TB to the same value as the branch
target.
Imagine the following sequence:
1) Thread A is executing the goto_tb sequence and loads the jmp
target into TCG_REG_TB.
2) Thread B updates the jmp target address and calls
tb_target_set_jmp_target(). This patches a new direct branch into the
goto_tb sequence.
3) Thread A executes the newly patched direct branch. The value in
TCG_REG_TB still contains the old jmp target.
TCG_REG_TB MUST contain the translation block's tc.ptr. Execution will
eventually crash after performing memory accesses generated from a
faulty value in TCG_REG_TB.
This presents as segfaults or illegal instruction exceptions.
Do not revert commit 20b6643324 as it did fix a different race
condition. Instead remove the direct branch optimization and always use
indirect branches.
The direct branch optimization can be re-added later with a race free
sequence.
Fixes: 20b6643324 ("tcg/ppc: Reorg goto_tb implementation")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1726
Reported-by: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com>
Tested-by: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Co-developed-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Message-Id: <20230717093001.13167-1-jniethe5@gmail.com>
We adjust CONFIG_ATOMIC128 and CONFIG_CMPXCHG128 with
CONFIG_ATOMIC128_OPT in atomic128.h. It is difficult
to tell when those changes have been applied with the
ifdef we must use with CONFIG_CMPXCHG128. So instead
use HAVE_CMPXCHG128, which triggers -Werror-undef when
the proper header has not been included.
Improves tcg_gen_atomic_cmpxchg_i128 for s390x host, which
requires CONFIG_ATOMIC128_OPT. Without this we fall back
to EXCP_ATOMIC to single-step 128-bit atomics, which is
slow enough to cause some tests to time out.
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Off by one error, failing to take into account that layout_arg_1
already incremented info_in_idx for the first piece. We only
need care for the n-1 TCG_CALL_ARG_BY_REF_N pieces here.
Cc: qemu-stable@nongnu.org
Fixes: 313bdea84d ("tcg: Add TCG_CALL_{RET,ARG}_BY_REF")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1751
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Move the code from tcg/. Fix a bug in that PPC_FEATURE2_ARCH_3_10
is actually spelled PPC_FEATURE2_ARCH_3_1.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tcg_assert_listed_vecop() is only used in tcg-op-vec.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230629091107.74384-1-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move to fill a hole in the set of bits.
Reduce the total number of tlb bits by 1.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The virtio devices require proper memory ordering between
the vcpus and the iothreads.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The 5th parameter of tcg_gen_gvec_2s should be replaced by the
temporary tmp variable in the tcg_gen_gvec_andcs function.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-Id: <20230622161646.32005-9-max.chou@sifive.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TBStats will be introduced to replace CONFIG_PROFILER totally, here
remove all CONFIG_PROFILER related stuffs first.
Signed-off-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fei Wu <fei2.wu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230607122411.3394702-2-fei2.wu@intel.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restructure the ifdef ladder, separating 64-bit from 32-bit,
and ensure _CALL_AIX is set for ELF v1. Fixes the build for
ppc64 big-endian host with clang.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cut and paste error from the 4-operand memops.
Fixes: ab64da7977 ("tcg/tci: Adjust passing of MemOpIdx")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230608162925.677598-1-richard.henderson@linaro.org>
We require either 2 or 4 registers to hold int128_t.
Failure to do so results in a register allocation assert.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since adding MO_ATOM_MASK, the maximum MemOpIdx requires 15 bits,
which overflows the 12 bit field allocated for TCI memory ops.
Expand the field to 16 bits for 2-operand memory ops, and place
the value in TCG_REG_TMP for 3-operand memory ops (same as we
already do for 4-operand memory ops).
Cures a debug assert for aarch64, with FEAT_LSE2 enabled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In commit d56fea79f9 ("tcg: Move TCG_{LOW,HIGH} to tcg-internal.h")
we replaced the "_link_error" definitions with modern QEMU_ERROR()
attribute markup. We covered tcg-op.c but forgot to completely
clean tcg-op-vec.c. Do it now.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230605175647.88395-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create two static libraries for use by each execution mode.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This finally paves the way for tcg/ to be built once per mode.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The bug was hidden because they happen to have the same values.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is all that is required by tcg/ from exec-all.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From this remove, it's no longer clear what this is attempting
to protect. The last time a use of this define was added to
the source tree, as opposed to merely moved around, was 2008.
There have been many cleanups since that time and this is
no longer required for the build to succeed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create tcg/tcg-op-gvec-common.h, moving everything that does not
concern TARGET_LONG_BITS. Adjust tcg-op-gvec.c to use the new header.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The replacement isn't ideal, as the raw count of bits
is not easily synced with exec/cpu-all.h, but it does
remove from tcg.h the target dependency on TARGET_PAGE_BITS_MIN
which is built into TLB_FLAGS_MASK.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This replaces of TCG_GUEST_DEFAULT_MO in tcg-op-ldst.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will enable replacement of TARGET_INSN_START_WORDS in tcg.c.
Split out "tcg/insn-start-words.h" and use it in target/.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Make tcg_gen_callN a static function. Create tcg_gen_call[0-7]
functions for use by helper-gen.h.inc.
Removes a multiplicty of calls to __stack_chk_fail, saving up
to 143kiB of .text space as measured on an x86_64 host.
Old New Less %Change
8888680 8741816 146864 1.65% qemu-system-aarch64
5911832 5856152 55680 0.94% qemu-system-riscv64
5816728 5767512 49216 0.85% qemu-system-mips64
6707832 6659144 48688 0.73% qemu-system-ppc64
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Removes a multiplicity of calls to __assert_fail, saving up
to 360kiB of .text space as measured on an x86_64 host.
Old New Less %Change
9257272 8888680 368592 3.98% qemu-system-aarch64
6100968 5911832 189136 3.10% qemu-system-riscv64
5839112 5707032 132080 2.26% qemu-system-mips
4447608 4341752 105856 2.38% qemu-system-s390x
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for compiling tcg/ only once, eliminate
the all_helpers array. Instantiate the info structs for
the generic helpers in accel/tcg/, and the structs for
the target-specific helpers in each translate.c.
Since we don't see all of the info structs at startup,
initialize at first use, using g_once_init_* to make
sure we don't race while doing so.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will be required outside of tcg-internal.h soon.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create tcg/tcg-op-common.h, moving everything that does not concern
TARGET_LONG_BITS or TCGv. Adjust tcg/*.c to use the new header
instead of tcg-op.h, in preparation for compiling tcg/ only once.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Often, the only thing we need to know about the TCG host
is the register size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect the layout of ArchCPU from TCG compilation.
Pass the relative offset of 'env' and 'neg.tlb.f' as a parameter.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This makes CPUTLBEntry agnostic to the address size of the guest.
When 32-bit addresses are in effect, we can simply read the low
32 bits of the 64-bit field. Similarly when we need to update
the field for setting TLB_NOTDIRTY.
For TCG backends that could in theory be big-endian, but in
practice are not (arm, loongarch, riscv), use QEMU_BUILD_BUG_ON
to document and ensure this is not accidentally missed.
For s390x, which is always big-endian, use HOST_BIG_ENDIAN anyway,
to document the reason for the adjustment.
For sparc64 and ppc64, always perform a 64-bit load, and rely on
the following 32-bit comparison to ignore the high bits.
Rearrange mips and ppc if ladders for clarity.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses replaced with TCGContext.addr_type.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses replaced with TCGContext.addr_type.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses replaced with TCGContext.addr_type.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses replaced with TCGContext.addr_type.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The last use was removed by e77c89fb08.
Fixes: e77c89fb08 ("cputlb: Remove static tlb sizing")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use LPQ/STPQ when 16-byte atomicity is required.
Note that these instructions require 16-byte alignment.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use LQ/STQ with ISA v2.07, and 16-byte atomicity is required.
Note that these instructions do not require 16-byte alignment.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With FEAT_LSE2, LDP/STP suffices. Without FEAT_LSE2, use LDXP+STXP
16-byte atomicity is required and LDP/STP otherwise.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Adjust the softmmu tlb to use TMP[0-2], not any of the normally available
registers. Since we handle overlap betwen inputs and helper arguments,
we can allow any allocatable reg.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need to allocate a second general-purpose temporary.
Rename the existing temps to add a distinguishing number.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The first move was incorrectly using TCG_TYPE_I32 while the second
move was correctly using TCG_TYPE_REG. This prevents a 64-bit host
from moving all 128-bits of the return value.
Fixes: ebebea53ef ("tcg: Support TCG_TYPE_I128 in tcg_out_{ld,st}_helper_{args,ret}")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement with and without Zicond. Without Zicond, we were letting
the middle-end expand to a 5 insn sequence; better to use a branch
over a single insn.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out a helper function, tcg_out_setcond_int, which does not
always produce the complete boolean result, but returns a set of
flags to do so.
Based on 21af161984, the same improvement for loongarch64.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The instruction is a combined zero-extend and add.
Use it for exactly that.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Define a useful subset of the extensions. Probe for them
via compiler pre-processor feature macros and SIGILL.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since e03b56863d, which replaced HOST_WORDS_BIGENDIAN
with HOST_BIG_ENDIAN, there is no need to define a second
symbol which is [0,1].
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These sequences are inexpensive to test. Maxing out at three insns
results in the same space as a load plus the constant pool entry.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These addresses are often loaded by the qemu_ld/st slow path,
for loading the retaddr value.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Repeated calls to a single helper are common -- especially
the ones for softmmu memory access. Prefer the constant pool
to longer sequences to increase sharing.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
During normal processing, the constant pool is accessible via
TCG_REG_TB. During the prologue, it is accessible via TCG_REG_T9.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emit all constants that can be loaded in exactly one insn.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This vastly reduces the size of code generated for 64-bit addresses.
The code for exit_tb, for instance, where we load a (tagged) pointer
to the current TB, goes from
0x400aa9725c: li v0,64
0x400aa97260: dsll v0,v0,0x10
0x400aa97264: ori v0,v0,0xaa9
0x400aa97268: dsll v0,v0,0x10
0x400aa9726c: j 0x400aa9703c
0x400aa97270: ori v0,v0,0x7083
to
0x400aa97240: j 0x400aa97040
0x400aa97244: daddiu v0,s6,-189
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In tcg_out_qemu_ld/st, we already check for guest_base matching int16_t.
Mirror that when setting up TCG_GUEST_BASE_REG in the prologue.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No functional change; just moving the saved reserved regs to the end.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No functional change; just moving the saved reserved regs to the end.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is always defined, and the optimization pass is
essential to producing reasonable code.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This had been set since the beginning, is never undefined,
and it would seem to be harmful to debugging to do so.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of functions.
The only use of the functions with explicit endianness was in
target/sparc64, and that was only to satisfy the assert: the
correct endianness is already built into memop.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the code from tcg/. The only use of these bits so far
is with respect to the atomicity of tcg operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the CPUINFO_* bits instead of the individual boolean
variables that we had been using. Remove all of the init
code that was moved over to cpuinfo-i386.c.
Note that have_avx512* check both AVX512{F,VL}, as we had
previously done during tcg_target_init.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
After static_kwargs has been changed to an empty dictionary, it has
no functional effect and can be removed.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCG will need this declaration, without all of the other
bits that come with cpu-all.h.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect guest tlb parameters from TCG compilation.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect guest page size from TCG compilation.
While this could be done via exec/target_page.h, we want to cache
the value across multiple memory access operations, so we might
as well initialize this early.
The changes within tcg/ are entirely mechanical:
sed -i s/TARGET_PAGE_BITS/s->page_bits/g
sed -i s/TARGET_PAGE_MASK/s->page_mask/g
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses replaced with TCGContext.addr_type.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses replaced with TCGContext.addr_type.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses replaced with TCGContext.addr_type.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses replaced with TCGContext.addr_type.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Eliminate the test vs TARGET_LONG_BITS by considering this
predicate to be always true, and simplify accordingly.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses can be infered from the INDEX_op_qemu_*_a{32,64}_*
opcode being used.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses can be infered from the INDEX_op_qemu_*_a{32,64}_* opcode
being used. Add a field into TCGLabelQemuLdst to record the usage.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Because of its use on tgen_arithi, this value must be a signed
32-bit quantity, as that is what may be encoded in the insn.
The truncation of the value to unsigned for 32-bit guests is
done via the REX bit via 'trexw'.
Removes the only uses of target_ulong from this tcg backend.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since TCG_TYPE_I32 values are kept zero-extended in registers, via
omission of the REXW bit, we need not extend if the register matches.
This is already relied upon by qemu_{ld,st}.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Keep all 32-bit values zero extended in the register, not solely when
addresses are 32 bits. This eliminates a dependency on TARGET_LONG_BITS.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We now have the address size as part of the opcode, so
we no longer need to test TARGET_LONG_BITS. We can use
uint64_t for target_ulong, as passed into load/store helpers.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For 32-bit hosts, we cannot simply rely on TCGContext.addr_bits,
as we need one or two host registers to represent the guest address.
Create the new opcodes and update all users. Since we have not
yet eliminated TARGET_LONG_BITS, only one of the two opcodes will
ever be used, so we can get away with treating them the same in
the backends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expand from TCGv to TCGTemp inline in the translators,
and validate that the size matches tcg_ctx->addr_type.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expand from TCGv to TCGTemp inline in the translators,
and validate that the size matches tcg_ctx->addr_type.
These inlines will eventually be seen only by target-specific code.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will enable replacement of TARGET_LONG_BITS within tcg/.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we do this inside gen_empty_mem_cb anyway, let's
do this earlier inside tcg expansion.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We only need to make copies for loads, when the destination
overlaps the address. For now, only eliminate the copy for
stores and 128-bit loads.
Rename plugin_prep_mem_callbacks to plugin_maybe_preserve_addr,
returning NULL if no copy is made.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always pass the target address as uint64_t.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always pass the target address as uint64_t.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always pass the target address as uint64_t.
Adjust tcg_out_{ld,st}_helper_args to match.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already pass uint64_t to restore_state_to_opc; this changes all
of the other uses from insn_start through the encoding to decoding.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No change to the ultimate load/store routines yet, so some atomicity
conditions not yet honored, but plumbs the change to alignment through
the relevant functions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No change to the ultimate load/store routines yet, so some atomicity
conditions not yet honored, but plumbs the change to alignment through
the relevant functions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Examine MemOp for atomicity and alignment, adjusting alignment
as required to implement atomicity on the host.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that tcg_out_helper_load_regs is not recursive, we can
merge it into its only caller, tcg_out_helper_load_slots.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With x86_64 as host, we do not have any temporaries with which to
resolve cycles, but we do have xchg. As a side bonus, the set of
graphs that can be made with 3 nodes and all nodes conflicting is
small: two. We can solve the cycle with a single temp.
This is required for x86_64 to handle stores of i128: 1 address
register and 2 data registers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add opcodes for backend support for 128-bit memory operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the unparameterized TCG_TARGET_HAS_MEMORY_BSWAP macro
with a function with a memop argument.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The system is required to emulate unaligned accesses, even if the
hardware does not support it. The resulting trap may or may not
be more efficient than the qemu slow path. There are linux kernel
patches in flight to allow userspace to query hardware support;
we can re-evaluate whether to enable this by default after that.
In the meantime, softmmu now matches useronly, where we already
assumed that unaligned accesses are supported.
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Test the final byte of an unaligned access.
Use BSTRINS.D to clear the range of bits, rather than AND.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This should be true of all loongarch64 running Linux.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Drop the target-specific trampolines for the standard slow path.
This lets us use tcg_out_helper_{ld,st}_args, and handles the new
atomicity bits within MemOp.
At the same time, use the full load/store helpers for user-only mode.
Drop inline unaligned access support for user-only mode, as it does
not handle atomicity.
Use TCG_REG_T[1-3] in the tlb lookup, instead of TCG_REG_O[0-2].
This allows the constraints to be simplified.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emphasize that the constant is unsigned.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Shuffle the order in tcg_out_movi_int to check s13 first, and
drop this check from tcg_out_movi_imm32. This might make the
sequence for in_prologue larger, but not worth worrying about.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emphasize that the constant is signed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of using helper_unaligned_{ld,st}, use the full load/store helpers.
This will allow the fast path to increase alignment to implement atomicity
while not immediately raising an alignment exception.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
