We will shortly require sari in other context;
split out both for cleanliness sake.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will shortly require these in other context;
make the expansion as clear as possible.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Combine the three bswap16 routines, and differentiate via the flags.
Use the correct flags combination from the load/store routines, and
pass along the constant parameter from tcg_out_op.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass in the input and output size. We currently use 3 of the 5
possible combinations; the others may be used by new tcg opcodes.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Retain the current rorw bswap16 expansion for the zero-in/zero-out case.
Otherwise, perform a wider bswap plus a right-shift or extend.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will eventually simplify front-end usage, and will allow
backends to unset TCG_TARGET_HAS_MEMORY_BSWAP without loss of
optimization.
The argument is added during expansion, not currently exposed to the
front end translators. The backends currently only support a flags
value of either TCG_BSWAP_IZ, or (TCG_BSWAP_IZ | TCG_BSWAP_OZ),
since they all require zero top bytes and leave them that way.
At the existing call sites we pass in (TCG_BSWAP_IZ | TCG_BSWAP_OZ),
except for the flags-ignored cases of a 32-bit swap of a 32-bit
value and or a 64-bit swap of a 64-bit value, where we pass 0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The trap number for a page fault on BSD systems is T_PAGEFLT
not 0xe -- 0xe is used by Linux and represents the intel hardware
trap vector. The BSD kernels, however, translate this to T_PAGEFLT
in their Xpage, Xtrap0e, Xtrap14, etc fault handlers. This is true
for i386 and x86_64, though the name of the trap hanlder can very
on the flavor of BSD. As far as I can tell, Linux doesn't provide
a define for this value. Invent a new one (PAGE_FAULT_TRAP) and
use it instead to avoid uglier ifdefs.
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Signed-off-by: Juergen Lock <nox@FreeBSD.org>
[ Rework to avoid ifdefs and expand it to i386 ]
Signed-off-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20210625045707.84534-3-imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Message-Id: <20210624105023.3852-6-zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We always know the exact value of X, that's all that matters.
This avoids splitting the TB e.g. between "ax" and "addq".
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Ever since 2a44f7f173, flagx_known is always true.
Fold away all of the tests against the flag.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use movcond instead of brcond to set env_pc.
Discard the btarget and btaken variables to improve
register allocation and avoid unnecessary writeback.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can use this in gen_goto_tb and for DISAS_JUMP
to indirectly chain to the next TB.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move delayed branch handling to tb_stop, where we can re-use other
end-of-tb code, e.g. the evaluation of flags. Honor single stepping.
Validate that we aren't losing state by overwriting is_jmp.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move this pc update into tb_stop.
We will be able to re-use this code shortly.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These insns set DISAS_UPDATE without cpustate_changed,
which isn't quite right.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We really do this already, by including them into the same test.
This just hoists the expression up a bit.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not skip the page check for user-only -- mmap/mprotect can
still change page mappings. Only check dc->base.pc_first, not
dc->ppc -- the start page is the only one that's relevant.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
After we've raised the exception, we have left the TB.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only semantic of DISAS_TB_JUMP is that we've done goto_tb,
which is the same as DISAS_NORETURN -- we've exited the tb.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This value is unused.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Migrate the is_jmp, tb and singlestep_enabled fields
from DisasContext into the base.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Prepare for receiving it as a pointer input.
Tested-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Migrate the bstate, tb and singlestep_enabled fields
from DisasContext into the base.
Tested-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have pre-computed the next instruction address into
dc->base.pc_next, so we might as well use it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move handle_instruction into nios2_tr_translate_insn
as the only caller.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Direct assignments to env during translation do not work.
As it happens, the only way we can get here is if env->pc
is already set to dc->pc. We will trap on the first insn
we execute anywhere on the page.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Migrate the is_jmp, tb and singlestep_enabled fields from
DisasContext into the base. Use pc_first instead of tb->pc.
Increment pc_next prior to decode, leaving the address of
the current insn in dc->pc.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not need to copy this into DisasContext.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not need to copy this into DisasContext.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only semantic of DISAS_TB_JUMP is that we've done goto_tb,
which is the same as DISAS_NORETURN -- we've exited the tb.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-5-git-send-email-tsimpson@quicinc.com>
Previously the store-conditional code was writing to hex_pred[prednum].
Then, the fGEN_TCG override was reading from there to the destination
variable so that the packet commit logic would handle it properly.
The correct implementation is to write to the destination variable
and don't have the extra read in the override.
Remove the unused arguments from gen_store_conditional[48]
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-4-git-send-email-tsimpson@quicinc.com>
Y4_l2fetch == l2fetch(Rs32, Rt32)
Y5_l2fetch == l2fetch(Rs32, Rtt32)
The semantics for these instructions are present, but the encodings
are missing.
Note that these are treated as nops in qemu, so we add overrides.
Test case added to tests/tcg/hexagon/misc.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-3-git-send-email-tsimpson@quicinc.com>
Change fLSBNEW/fLSBNEW0/fLSBNEW1 from copy to "x & 1"
Remove gen_logical_not function
Clean up fLSBNEWNOT to use andi-1 followed by xori-1
Test cases added to tests/tcg/hexagon/misc.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-2-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210628121133.193984-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a convenient macro, that works for qemu_memalign() like
g_autofree works with g_malloc.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210628121133.193984-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds new tests in which we use x-blockdev-reopen to change
bs->file
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210610120537.196183-10-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the x-blockdev-reopen was added it allowed reconfiguring the
graph by replacing backing files, but changing the 'file' option was
forbidden. Because of this restriction some operations are not
possible, notably inserting and removing block filters.
This patch adds support for replacing the 'file' option. This is
similar to replacing the backing file and the user is likewise
responsible for the correctness of the resulting graph, otherwise this
can lead to data corruption.
Signed-off-by: Alberto Garcia <berto@igalia.com>
[vsementsov: bdrv_reopen_parse_file_or_backing() is modified a lot]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610120537.196183-9-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's used only in bdrv_reopen_commit(). "backing" is covered by the
loop through all children except for case when we removed backing child
during reopen.
Make it more obvious and drop extra boolean field: qdict_del will not
fail if there is no such entry.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610120537.196183-8-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Richard Henderson
Warner Losh
LIU Zhiwei
Taylor Simpson
Vladimir Sementsov-Ogievskiy
Alberto Garcia