qemu-e2k/hw/misc
Peter Delevoryas 55c57023b7 hw/misc/aspeed: Add PECI controller
This introduces a really basic PECI controller that responses to
commands by always setting the response code to success and then raising
an interrupt to indicate the command is done. This helps avoid getting
hit with constant errors if the driver continuously attempts to send a
command and keeps timing out.

The AST2400 and AST2500 only included registers up to 0x5C, not 0xFC.
They supported PECI 1.1, 2.0, and 3.0. The AST2600 and AST1030 support
PECI 4.0, which includes more read/write buffer registers from 0x80 to
0xFC to support 64-byte mode.

This patch doesn't attempt to handle that, or to create a different
version of the controller for the different generations, since it's only
implementing functionality that is common to all generations.

The basic sequence of events is that the firmware will read and write to
various registers and then trigger a command by setting the FIRE bit in
the command register (similar to the I2C controller).

Then the firmware waits for an interrupt from the PECI controller,
expecting the interrupt status register to be filled in with info on
what happened. If the command was transmitted and received successfully,
then response codes from the host CPU will be found in the data buffer
registers.

Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220630045133.32251-12-me@pjd.dev>
[ clg: s/sysbus_mmio_map/aspeed_mmio_map/ ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30 09:21:14 +02:00
..
macio macio/pmu.c: remove redundant code 2022-03-09 09:28:28 +00:00
a9scu.c
allwinner-cpucfg.c
allwinner-h3-ccu.c
allwinner-h3-dramc.c
allwinner-h3-sysctrl.c
allwinner-sid.c
applesmc.c acpi: applesmc: use AcpiDevAmlIfClass:build_dev_aml to provide device's AML 2022-06-09 19:32:49 -04:00
arm11scu.c
arm_integrator_debug.c
arm_l2x0.c
arm_sysctl.c
armsse-cpu-pwrctrl.c hw/misc/sse-cpu-pwrctrl: Implement SSE-300 CPU<N>_PWRCTRL register block 2021-03-08 17:20:02 +00:00
armsse-cpuid.c hw/arm/mps2: Update old infocenter.arm.com URLs 2021-03-08 11:54:16 +00:00
armsse-mhu.c hw/arm/mps2: Update old infocenter.arm.com URLs 2021-03-08 11:54:16 +00:00
armv7m_ras.c arm: Move M-profile RAS register block into its own device 2021-09-01 11:08:18 +01:00
aspeed_hace.c aspeed/hace: Accumulative mode supported 2022-06-30 09:21:13 +02:00
aspeed_i3c.c hw/misc/aspeed_i3c.c: Introduce a dummy AST2600 I3C model. 2022-01-20 11:47:53 +00:00
aspeed_lpc.c hw/misc: Model KCS devices in the Aspeed LPC controller 2021-03-09 12:01:28 +01:00
aspeed_peci.c hw/misc/aspeed: Add PECI controller 2022-06-30 09:21:14 +02:00
aspeed_sbc.c aspeed: sbc: Correct default reset values 2022-05-02 17:03:02 +02:00
aspeed_scu.c aspeed/scu: Add trace events for read ops 2022-06-30 09:21:13 +02:00
aspeed_sdmc.c aspeed/sdmc: Add trace events 2022-02-26 18:40:51 +01:00
aspeed_xdma.c hw/misc/aspeed_xdma: Add AST2600 support 2021-05-01 10:03:52 +02:00
auxbus.c qbus: Rename qbus_create() to qbus_new() 2021-09-30 13:44:08 +01:00
avr_power.c
bcm2835_cprman.c clock: Add ClockEvent parameter to callbacks 2021-03-08 17:20:01 +00:00
bcm2835_mbox.c Mark remaining global TypeInfo instances as const 2022-02-21 13:30:20 +00:00
bcm2835_mphi.c
bcm2835_powermgt.c Mark remaining global TypeInfo instances as const 2022-02-21 13:30:20 +00:00
bcm2835_property.c Mark remaining global TypeInfo instances as const 2022-02-21 13:30:20 +00:00
bcm2835_rng.c Mark remaining global TypeInfo instances as const 2022-02-21 13:30:20 +00:00
bcm2835_thermal.c
cbus.c
debugexit.c
eccmemctl.c
edu.c
empty_slot.c
exynos4210_clk.c
exynos4210_pmu.c
exynos4210_rng.c
grlib_ahb_apb_pnp.c
imx6_ccm.c
imx6_src.c Use g_new() & friends where that makes obvious sense 2022-03-21 15:44:44 +01:00
imx6ul_ccm.c
imx7_ccm.c
imx7_gpr.c
imx7_snvs.c hw: Do not include qemu/log.h if it is not necessary 2021-05-02 17:24:50 +02:00
imx25_ccm.c
imx31_ccm.c
imx_ccm.c hw: Do not include qemu/log.h if it is not necessary 2021-05-02 17:24:50 +02:00
imx_rngc.c hw: Do not include qemu/log.h if it is not necessary 2021-05-02 17:24:50 +02:00
iotkit-secctl.c hw/misc/iotkit-secctl.c: Implement SSE-300 PID register values 2021-03-08 17:20:01 +00:00
iotkit-sysctl.c hw/misc/iotkit-sysctl: Implement SSE-200 and SSE-300 PID register values 2021-03-08 17:20:02 +00:00
iotkit-sysinfo.c hw/misc/iotkit-sysinfo.c: Implement SYS_CONFIG1 and IIDR 2021-03-08 17:20:01 +00:00
ivshmem.c Use g_unix_set_fd_nonblocking() 2022-05-03 15:17:30 +04:00
Kconfig lasi: move from hw/hppa to hw/misc 2022-05-08 18:52:37 +01:00
lasi.c lasi: move from hw/hppa to hw/misc 2022-05-08 18:52:37 +01:00
led.c hw: Do not include hw/irq.h if it is not necessary 2021-05-02 17:24:50 +02:00
mac_via.c mos6522: implement edge-triggering for CA1/2 and CB1/2 control line IRQs 2022-03-09 09:28:28 +00:00
mchp_pfsoc_dmc.c hw: Remove superfluous includes of hw/hw.h 2021-05-02 17:24:50 +02:00
mchp_pfsoc_ioscb.c hw: Remove superfluous includes of hw/hw.h 2021-05-02 17:24:50 +02:00
mchp_pfsoc_sysreg.c hw: Remove superfluous includes of hw/hw.h 2021-05-02 17:24:50 +02:00
meson.build hw/misc/aspeed: Add PECI controller 2022-06-30 09:21:14 +02:00
mips_cmgcr.c
mips_cpc.c
mips_itu.c compiler.h: replace QEMU_NORETURN with G_NORETURN 2022-04-21 17:03:51 +04:00
mos6522.c mos6522: implement edge-triggering for CA1/2 and CB1/2 control line IRQs 2022-03-09 09:28:28 +00:00
mps2-fpgaio.c hw/misc/mps2-fpgaio: Support AN547 DBGCTRL register 2021-03-08 17:20:03 +00:00
mps2-scc.c hw/misc/mps2-scc: Support using CFG0 bit 0 for remapping 2021-05-10 17:21:54 +01:00
msf2-sysreg.c
mst_fpga.c hw/arm: Constify VMStateDescription 2021-05-02 17:24:50 +02:00
npcm7xx_clk.c hw/misc/npcm7xx_clk: Don't leak string in npcm7xx_clk_sel_init() 2022-03-18 10:55:15 +00:00
npcm7xx_gcr.c
npcm7xx_mft.c hw/misc: Add NPCM7XX MFT Module 2021-03-12 12:48:56 +00:00
npcm7xx_pwm.c hw/misc: Add GPIOs for duty in NPCM7xx PWM 2021-03-12 12:48:56 +00:00
npcm7xx_rng.c
nrf51_rng.c
omap_clk.c
omap_gpmc.c
omap_l4.c
omap_sdrc.c
omap_tap.c
pc-testdev.c
pca9552.c misc/pca9552: Fix LED status register indexing in pca955x_get_led() 2021-09-20 08:50:59 +02:00
pci-testdev.c
pvpanic-isa.c acpi: pvpanic-isa: use AcpiDevAmlIfClass:build_dev_aml to provide device's AML 2022-06-09 19:32:49 -04:00
pvpanic-pci.c hw/misc/pvpanic: Use standard headers instead 2022-03-06 05:08:23 -05:00
pvpanic.c hw/misc/pvpanic: Use standard headers instead 2022-03-06 05:08:23 -05:00
sbsa_ec.c Remove qemu-common.h include from most units 2022-04-06 14:31:55 +02:00
sga.c hw/misc: deprecate the 'sga' device 2021-11-02 17:24:18 +01:00
sifive_e_prci.c hw: Remove superfluous includes of hw/hw.h 2021-05-02 17:24:50 +02:00
sifive_test.c hw: Remove superfluous includes of hw/hw.h 2021-05-02 17:24:50 +02:00
sifive_u_otp.c hw: Replace trivial drive_get_next() by drive_get() 2021-12-15 08:38:16 +01:00
sifive_u_prci.c
slavio_misc.c
stm32f2xx_syscfg.c
stm32f4xx_exti.c
stm32f4xx_syscfg.c
trace-events hw/misc/aspeed: Add PECI controller 2022-06-30 09:21:14 +02:00
trace.h
tz-mpc.c
tz-msc.c
tz-ppc.c
unimp.c
virt_ctrl.c hw/m68k: Fix typo in SPDX tag 2021-11-09 10:11:27 +01:00
vmcoreinfo.c
xlnx-versal-crl.c hw/misc: Add a model of the Xilinx Versal CRL 2022-04-21 11:37:03 +01:00
xlnx-versal-pmc-iou-slcr.c hw/misc: Add a model of Versal's PMC SLCR 2022-01-28 14:29:46 +00:00
xlnx-versal-xramc.c hw/misc: versal: Add a model of the XRAM controller 2021-03-12 12:40:09 +00:00
xlnx-zynqmp-apu-ctrl.c hw/misc: Add a model of the Xilinx ZynqMP APU Control 2022-03-18 11:31:20 +00:00
xlnx-zynqmp-crf.c hw/misc: Add a model of the Xilinx ZynqMP CRF 2022-03-18 11:31:20 +00:00
zynq_slcr.c hw/misc: zynq_slcr: Correctly compute output clocks in the reset exit phase 2021-09-13 16:07:20 +01:00