This patch moves gdbserver to the top level.
This patch is as close to a pure move as possible -- gdbserver still
builds its own variant of gnulib and gdbsupport. Changing this will
be done in a separate patch.
[v2] Note that, per Simon's review comment, this patch changes the
tree so that gdbserver is not built for or1k or score. This makes
sense, because there is apparently not actually a gdbserver port here.
[v3] This version of the patch also splits out some configury into a
new file, gdbserver/configure.host, so that the top-level configure
script can simply rely on it in order to decide whether gdbserver
should be built.
[v4] This version adds documentation and removes some unnecessary
top-level dependencies.
[v5] Update docs to mention "make all-gdbserver" and change how
top-level configure decides whether to build gdbserver, switching to a
single, shared script.
Tested by the buildbot.
ChangeLog
2020-02-07 Tom Tromey <tom@tromey.com>
Pedro Alves <palves@redhat.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbserver.
* gdbserver: New directory, moved from gdb/gdbserver.
* configure.ac (host_tools): Add gdbserver.
Only build gdbserver on certain systems.
* Makefile.in, configure: Rebuild.
* Makefile.def (host_modules, dependencies): Add gdbserver.
* MAINTAINERS: Add gdbserver.
gdb/ChangeLog
2020-02-07 Tom Tromey <tom@tromey.com>
* README: Update gdbserver documentation.
* gdbserver: Move to top level.
* configure.tgt (build_gdbserver): Remove.
* configure.ac: Remove --enable-gdbserver.
* configure: Rebuild.
* Makefile.in (distclean): Don't mention gdbserver.
Change-Id: I826b7565b54604711dc7a11edea0499cd51ff39e
The source_cache::ensure method may throw an exception through
the invocation of source_cache::get_plain_source_lines. This
happens when the source file is not found. The expected behaviour
of "ensure" is only returning "true" or "false" according to the
documentation in the header file.
So far, if gdb is in source layout and a file is missing, you see
some outputs like below:
,---------------------------------------------.
| test.c file is loaded in the source window. |
| |
| int main() |
| ... |
|---------------------------------------------|
| Remote debugging using :1234 |
| __start () at /path/to/crt0.S:141 |
| /path/to/crt0.S: No such file or directory. |
| (gdb) p/x $pc |
| $1 = 0x124 |
| (gdb) n |
| /path/to/crt0.S: No such file or directory. |
| (gdb) p/x $pc |
| $2 = 0x128 |
| (gdb) [pressing arrow-down key] |
| (gdb) terminate called after throwing an |
| instance of 'gdb_exception_error' |
`---------------------------------------------'
Other issues have been encountered as well [1].
The patch from Pedro [2] which is about preventing exceptions
from crossing the "readline" mitigates the situation by not
causing gdb crash, but still there are lots of errors printed:
,---------------------------------------------.
| test.c file is loaded in the source window. |
| |
| int main() |
| ... |
|---------------------------------------------|
| Remote debugging using :1234 |
| __start () at /path/to/crt0.S:141 |
| /path/to/crt0.S: No such file or directory. |
| (gdb) [pressing arrow-down key] |
| /path/to/crt0.S: No such file or directory. |
| (gdb) [pressing arrow-down key] |
| /path/to/crt0.S: No such file or directory. |
| (gdb) [pressing arrow-up key] |
| /path/to/crt0.S: No such file or directory. |
`---------------------------------------------'
With the changes of this patch, the behavior is like:
,---------------------------------------------.
| initially, source window is empty because |
| crt0.S is not found and according to the |
| program counter that is the piece of code |
| being executed. |
| |
| later, when we break at main (see commands |
| below), this window will be filled with the |
| the contents of test.c file. |
|---------------------------------------------|
| Remote debugging using :1234 |
| __start () at /path/to/crt0.S:141 |
| (gdb) p/x $pc |
| $1 = 0x124 |
| (gdb) n |
| (gdb) p/x $pc |
| $2 = 0x128 |
| (gdb) b main |
| Breakpoint 1 at 0x334: file test.c, line 8. |
| (gdb) cont |
| Continuing. |
| Breakpoint 1, main () at hello.c:8 |
| (gdb) n |
| (gdb) |
`---------------------------------------------'
There is no crash and the error message is completely
gone. Maybe it is good practice that the error is
shown inside the source window.
I tested this change against gdb.base/list-missing-source.exp
and there was no regression.
[1]
It has also been observed in the past that the register
values are not transferred from qemu's gdb stub, see:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/226
[2]
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=2f267673f0fdee9287e6d404ecd4f2d29da0d2f2
gdb/ChangeLog:
* source-cache.c (source_cache::ensure): Surround
get_plain_source_lines with a try/catch.
(source_cache::get_line_charpos): Get rid of try/catch
and only check for the return value of "ensure".
* tui/tui-source.c (tui_source_window::set_contents):
Simplify "nlines" calculation.
gdb/testsuite/ChangeLog:
* gdb.tui/tui-missing-src.exp: Add the "missing source
file" test for the TUI.
This was a typo introduced in f6ac5f3d63.
Found by looking through NetBSD's GDB patches:
https://github.com/NetBSD/pkgsrc-wip/blob/master/gdb-netbsd/patches/patch-gdb_sparc-nat.h
This patch can't be tested on Linux because Linux does not use the
sparc_target template.
gdb/ChangeLog:
2020-02-05 Christian Biesinger <cbiesinger@google.com>
* sparc-nat.h (struct sparc_target) <xfer_partial>: Fix base class
function call.
Change-Id: I4fa88cbdc365efe89b84cc0619b60db38718d9ce
Makes the comment match the macro name in the #define/#ifdef.
gdb/ChangeLog:
2020-02-05 Christian Biesinger <cbiesinger@google.com>
* ppc-nbsd-tdep.h: Fix macro name in #endif comment.
Change-Id: If7b2e49e65495b8eb9ed7b6c9a11277579a93a05
In preparation for RISC-V/Linux `gdbserver' support factor out parts of
native target description determination code that can be shared between
the programs.
gdb/
* nat/riscv-linux-tdesc.h: New file.
* nat/riscv-linux-tdesc.c: New file, taking code from...
* riscv-linux-nat.c (riscv_linux_nat_target::read_description):
... here.
* configure.nat <linux> <riscv*>: Add nat/riscv-linux-tdesc.o to
NATDEPFILES.
We assign the simulator inferior a fake ptid. If this ptid is ever
set to null_ptid then we are going to run into problems - the
simulator ptid is what we return from gdbsim_target::wait, and this in
turn is used to look up the inferior data with a call to
find_inferior_pid, which asserts the pid is not 0 (which it is in
null_pid).
This commit adds an assert that the simulator's fake pid is not
null_ptid. There should be no user visible changes after this commit.
gdb/ChangeLog:
* remote-sim.c (sim_inferior_data::sim_inferior_data): Assert that
we don't set the fake simulator ptid to the null_ptid.
Change-Id: I6e08effe70e70855aea13c9caf4fd6913d5af56d
In the function f77_print_array_1, the variable 'i' which holds the
index is of datatype 'int', while bounds are of datatype LONGEST. Due to
size of int being smaller than LONGEST, the variable 'i' stores
incorrect values for high indexes (higher than max limit of int). Due
to this issue in sources, two abnormal behaviors are seen while printing
arrays with high indexes (please check array-bounds-high.f90) For high
indexes with negative sign, gdb prints empty array even if the array has
elements.
(gdb) p arr
$1 = ()
For high indexes with positive sign, gdb crashes. We have now changed
the datatype of 'i' to LONGEST which is same as datatype of bounds.
gdb/ChangeLog:
* f-valprint.c (f77_print_array_1): Changed datatype of index
variable to LONGEST from int to enable it to contain bound
values correctly.
gdb/testsuite/ChangeLog:
* gdb.fortran/array-bounds-high.exp: New file.
* gdb.fortran/array-bounds-high.f90: New file.
Change-Id: Ie2dce9380a249e634e2684b9c90f225e104369b7
Fix RISC-V native Linux support to handle a 64-bit FPU (FLEN == 64) with
both RV32 and RV64 systems, which is a part of the current Linux ABI for
hard-float systems, rather than assuming that (FLEN == XLEN) in target
description determination and that (FLEN == 64) in register access.
We can do better however and not rely on any particular value of FLEN
and probe for it dynamically, by observing that the PTRACE_GETREGSET
ptrace(2) call will only accept an exact regset size, and that will
reflect FLEN. Therefore iterate over the call in target description
determination with a geometrically increasing regset size until a match
is marked by a successful ptrace(2) call completion or we run beyond the
maximum size we can support.
Update register accessors accordingly, using FLEN determined to size the
buffer used for NT_PRSTATUS requests and then to exchange data with the
regcache.
Also handle a glibc bug where ELF_NFPREG is defined in terms of NFPREG,
however NFPREG is nowhere defined.
gdb/
* riscv-linux-nat.c [!NFPREG] (NFPREG): New macro.
(supply_fpregset_regnum, fill_fpregset): Handle regset buffer
offsets according to FLEN determined.
(riscv_linux_nat_target::read_description): Determine FLEN
dynamically.
(riscv_linux_nat_target::fetch_registers): Size regset buffer
according to FLEN determined.
(riscv_linux_nat_target::store_registers): Likewise.
When the command "info registers" (same as "info registers general"),
is issued, _all_ the registers from a tdesc XML are printed. This
includes the registers with empty register groups (set as "") which
are supposed to be only printed by "info registers all" (or "info
all-registers").
This bug got introduced after all the overhauls that the
tdesc_register_in_reggroup_p() went through. You can see that the
logic of tdesc_register_in_reggroup_p() did NOT remain the same after
all those changes:
git difftool c9c895b9666..HEAD -- gdb/target-descriptions.c
With the current implementation, when the reg->group is an empty
string, this function returns -1, while in the working revision
(c9c895b966), it returned 0. This patch makes sure that the 0 is
returned again.
The old implementation of tdesc_register_in_reggroup_p() returned
-1 when "reggroup" was set to "all_reggroups" at line 4 below:
1 tdesc_register_reggroup_p (...)
2 {
3 ...
4 ret = tdesc_register_in_reggroup_p (gdbarch, regno, reggroup);
5 if (ret != -1)
6 return ret;
7
8 return default_register_reggroup_p (gdbarch, regno, reggroup);
9 }
As a result, the execution continued at line 8 and the
default_register_reggroup_p(..., reggroup=all_reggroups) would
return 1. However, with the current implementation of
tdesc_register_in_reggroup_p() that allows checking against any
arbitrary group name, it returns 0 when comparing the "reg->group"
against the string "all" which is the group name for "all_reggroups".
I have added a special check to cover this case and
"info all-registers" works as expected.
gdb/ChangeLog:
* target-descriptions.c (tdesc_register_in_reggroup_p): Return 0
when reg->group is empty and reggroup is not.
Change-Id: I9eaf9d7fb36410ed5684ae652fe4756b1b2e61a3
ravenscar-thread.c needed a change to adapt to multi-target:
ravenscar_thread_target::mourn_inferior called the mourn_inferior
method on the target beneat -- but when the target beneath was the
remote target, this resulted in the ravenscar target being deleted.
Switching the order of the calls to unpush_target and the beneath's
mourn_inferior fixes this problem.
gdb/ChangeLog
2020-01-31 Tom Tromey <tromey@adacore.com>
* ravenscar-thread.c (ravenscar_thread_target::mourn_inferior):
Call beneath target's mourn_inferior after unpushing.
Change-Id: Ia80380515c403adc40505a6b3420c9cb35754370
In TUI mode, if the disassembly output for the program is less than
one screen long, then currently if the user scrolls down until on the
last assembly instruction is displayed and then tries to scroll up
using Page-Up, the display doesn't update - they are stuck viewing the
last line.
If the user tries to scroll up using the Up-Arrow, then the display
scrolls normally.
What is happening is on the Page-Up we ask GDB to scroll backward the
same number of lines as the height of the TUI ASM window. The back
scanner, which looks for a good place to start disassembling, fails to
find a starting address which will provide the requested number of new
lines before we get back to the original starting address (which is
not surprising, our whole program contains less than a screen height
of instructions), as a result the back scanner gives up and returns
the original starting address.
When we scroll with Up-Arrow we only ask the back scanner to find 1
new instruction, which it manages to do, so this scroll works.
The solution here is, when we fail to find enough instructions, to
return the lowest address we did manage to find. This will ensure we
jump to the lowest possible address in the disassembly output.
gdb/ChangeLog:
PR tui/9765
* tui/tui-disasm.c (tui_find_disassembly_address): If we don't
have enough lines to fill the screen, still return the lowest
address we found.
gdb/testsuite/ChangeLog:
PR tui/9765
* gdb.tui/tui-layout-asm-short-prog.S: New file.
* gdb.tui/tui-layout-asm-short-prog.exp: New file.
Change-Id: I6a6a7972c68a0559e9717fd8d82870b669a40af3
GDB has some commands ('+', '-', '<', and '>') for scrolling the SRC
and ASM TUI windows from the CMD window, however the help text for
these commands lists the arguments in the wrong order.
This commit updates the help text to match how GDB actually works, and
also extends the text to describe what the arguments mean, and what
the defaults are.
There should be no change in GDBs functionality after this commit.
gdb/ChangeLog:
* tui/tui-win.c (_initialize_tui_win): Update help text for '+',
'-', '<', and '>' commands.
Change-Id: Ib2624891de1f4ba983838822206304e4c3ed982e
While testing a GCC 10 build of our git HEAD, Sergio noticed an error
triggered by -Werror-stringop on
infcmd.c:construct_inferior_arguments. One of the things the function
does is calculate the length of the string that will hold the
inferior's arguments. GCC warns us that 'length' can be 0, which can
lead to undesired behaviour:
../../gdb/infcmd.c: In function 'char* construct_inferior_arguments(int, char**)':
../../gdb/infcmd.c:369:17: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
369 | result[0] = '\0';
| ~~~~~~~~~~^~~~~~
../../gdb/infcmd.c:368:33: note: at offset 0 to an object with size 0 allocated by 'xmalloc' here
368 | result = (char *) xmalloc (length);
| ~~~~~~~~^~~~~~~~
The solution here is to assert that 'argc' is greater than 0 on entry,
which makes GCC understand that the loops always run at least once,
and thus 'length' is always > 0.
Tested by rebuilding.
gdb/ChangeLog:
2020-01-29 Pedro Alves <palves@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* infcmd.c (construct_inferior_arguments): Assert that
'argc' is greater than 0.
Change-Id: Ide8407cbedcb4921de1843a6a15bbcb7676c7d26
New in v3:
- Code cleanups based on reviews.
New in v2:
- Fixed misc problems based on reviews.
- Switched to using gdbarch_program_breakpoint_here_p as opposed to
gdbarch_insn_is_breakpoint.
- Fixed matching of brk instructions. Previously the mask was incorrect, which
was showing up as a few failures in the testsuite. Now it is clean.
- New testcase (separate patch).
- Moved program_breakpoint_here () to arch-utils.c and made it the default
implementation of gdbarch_program_breakpoint_here_p.
--
It was reported to me that program breakpoints (permanent ones inserted into
the code itself) other than the one GDB uses for AArch64 (0xd4200000) do not
generate visible stops when continuing, and GDB will continue spinning
infinitely.
This happens because GDB, upon hitting one of those program breakpoints, thinks
the SIGTRAP came from a delayed breakpoint hit...
(gdb) x/i $pc
=> 0x4005c0 <problem_function>: brk #0x90f
(gdb) c
Continuing.
infrun: clear_proceed_status_thread (process 14198)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming process 14198
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0
infrun: infrun_async(1)
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 14198.14198.0 [process 14198],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: stop_pc = 0x4005c0
infrun: delayed software breakpoint trap, ignoring
infrun: no stepping, continue
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 14198.14198.0 [process 14198],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: stop_pc = 0x4005c0
infrun: delayed software breakpoint trap, ignoring
infrun: no stepping, continue
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 14198.14198.0 [process 14198],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: stop_pc = 0x4005c0
infrun: delayed software breakpoint trap, ignoring
infrun: no stepping, continue
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 14198.14198.0 [process 14198],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: stop_pc = 0x4005c0
infrun: delayed software breakpoint trap, ignoring
infrun: no stepping, continue
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 14198.14198.0 [process 14198],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
...
... which is not the case.
If the program breakpoint is one GDB recognizes, then it will stop when it
hits it.
(gdb) x/i $pc
=> 0x4005c0 <problem_function>: brk #0x0
(gdb) c
Continuing.
infrun: clear_proceed_status_thread (process 14193)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming process 14193
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14193] at 0x4005c0
infrun: infrun_async(1)
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 14193.14193.0 [process 14193],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: stop_pc = 0x4005c0
infrun: random signal (GDB_SIGNAL_TRAP)
infrun: stop_waiting
infrun: stop_all_threads
infrun: stop_all_threads, pass=0, iterations=0
infrun: process 14193 not executing
infrun: stop_all_threads, pass=1, iterations=1
infrun: process 14193 not executing
infrun: stop_all_threads done
Program received signal SIGTRAP, Trace/breakpoint trap.
problem_function () at brk_0.c:7
7 asm("brk %0\n\t" ::"n"(0x0));
infrun: infrun_async(0)
Otherwise GDB will keep trying to resume the inferior and will keep
seeing the SIGTRAP's, without stopping.
To the user it appears GDB has gone into an infinite loop, interruptible only
by Ctrl-C.
Also, windbg seems to use a different variation of AArch64 breakpoint compared
to GDB. This causes problems when debugging Windows on ARM binaries, when
program breakpoints are being used.
The proposed patch creates a new gdbarch method (gdbarch_program_breakpoint_here_p)
that tells GDB whether the underlying instruction is a breakpoint instruction
or not.
This is more general than only checking for the instruction GDB uses as
breakpoint.
The existing logic is still preserved for targets that do not implement this
new gdbarch method.
The end result is like so:
(gdb) x/i $pc
=> 0x4005c0 <problem_function>: brk #0x90f
(gdb) c
Continuing.
infrun: clear_proceed_status_thread (process 16417)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming process 16417
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 16417] at 0x4005c0
infrun: infrun_async(1)
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 16417.16417.0 [process 16417],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: stop_pc = 0x4005c0
infrun: random signal (GDB_SIGNAL_TRAP)
infrun: stop_waiting
infrun: stop_all_threads
infrun: stop_all_threads, pass=0, iterations=0
infrun: process 16417 not executing
infrun: stop_all_threads, pass=1, iterations=1
infrun: process 16417 not executing
infrun: stop_all_threads done
Program received signal SIGTRAP, Trace/breakpoint trap.
problem_function () at brk.c:7
7 asm("brk %0\n\t" ::"n"(0x900 + 0xf));
infrun: infrun_async(0)
gdb/ChangeLog:
2020-01-29 Luis Machado <luis.machado@linaro.org>
* aarch64-tdep.c (BRK_INSN_MASK): Define to 0xffe0001f.
(BRK_INSN_MASK): Define to 0xd4200000.
(aarch64_program_breakpoint_here_p): New function.
(aarch64_gdbarch_init): Set gdbarch_program_breakpoint_here_p hook.
* arch-utils.c (default_program_breakpoint_here_p): Moved from
breakpoint.c.
* arch-utils.h (default_program_breakpoint_here_p): Moved from
breakpoint.h
* breakpoint.c (bp_loc_is_permanent): Changed return type to bool and
call gdbarch_program_breakpoint_here_p.
(program_breakpoint_here): Moved to arch-utils.c, renamed to
default_program_breakpoint_here_p, changed return type to bool and
simplified.
* breakpoint.h (program_breakpoint_here): Moved prototype to
arch-utils.h, renamed to default_program_breakpoint_here_p and changed
return type to bool.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbarch.sh (program_breakpoint_here_p): New method.
* infrun.c (handle_signal_stop): Call
gdbarch_program_breakpoint_here_p.
I noticed a couple of minor issues in ctfread.c, both fixed by this
patch:
* ctf_fp_info was not indented properly; and
* _initialize_ctfread is no longer needed
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* ctfread.c (struct ctf_fp_info): Reindent.
(_initialize_ctfread): Remove.
Change-Id: I72707b74bc59e6e426b3a7bc8843d96c0d786f1e
This patch removes the "readin" and "compunit_symtab" members from
partial_symtab, replacing them with methods. Then it introduces a new
"standard_psymtab" class, which restores these members; and changes
the symbol readers to use this intermediate class as the base class of
their partial symtab subclasses.
The reason for this is to make it possible for a symbol reader to
implement an alternate mapping between partial and full symbol tables.
This is important in order to be able to share psymtabs across
objfiles -- whether a psymtab has been "readin" is objfile-dependent,
as are the pointers to the full symbol tables.
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* psymtab.c (partial_map_expand_apply)
(psym_find_pc_sect_compunit_symtab, psym_lookup_symbol)
(psymtab_to_symtab, psym_find_last_source_symtab, dump_psymtab)
(psym_print_stats, psym_expand_symtabs_for_function)
(psym_map_symbol_filenames, psym_map_matching_symbols)
(psym_expand_symtabs_matching)
(partial_symtab::read_dependencies, maintenance_info_psymtabs)
(maintenance_check_psymtabs): Use new methods.
* psympriv.h (struct partial_symtab) <readin_p,
get_compunit_symtab>: New methods.
<readin, compunit_symtab>: Remove members.
(struct standard_psymtab): New.
(struct legacy_psymtab): Derive from standard_psymtab.
* dwarf2read.h (struct dwarf2_psymtab): Derive from
standard_psymtab.
* ctfread.c (struct ctf_psymtab): Derive from standard_psymtab.
Change-Id: Idb923f196d7e03bf7cb9cfc8134ed06dd3f211ce
Most of the symbol readers have code to iterate over a partial symtabs
dependencies, expanding each one and optionally printing a message.
Now that the "second-stage" psymtab expansion is available as a
method, these implementations can all be merged.
This patch also changes a couple more warnings into assertions.
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_psymtab_to_symtab_1): Call
read_dependencies. Add assert.
* psymtab.c (partial_symtab::read_dependencies): New method.
* psympriv.h (struct partial_symtab) <read_dependencies>: New
method.
* mdebugread.c (psymtab_to_symtab_1): Call read_dependencies.
* dwarf2read.c (dwarf2_psymtab::expand_psymtab): Call
read_dependencies.
* dbxread.c (dbx_psymtab_to_symtab_1): Call read_dependencies.
Add assert.
Change-Id: I8151e05677794e90223edc1a4cb70f7f69137d46
The symbol readers generally used two functions to expand a partial
symtab: an outer function (now the "read_symtab" method), and an inner
function, typically named something like "psymtab_to_symtab".
This patch changes this second step to be a method on partial_symtab,
and updates all the callers. For legacy_psymtab, a new function
pointer member is introduced.
This patch enables a subsequent cleanup.
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_psymtab_to_symtab_1): Change argument order.
Call expand_psymtab.
(xcoff_read_symtab): Call expand_psymtab.
(xcoff_start_psymtab, xcoff_end_psymtab): Set
legacy_expand_psymtab.
* psympriv.h (struct partial_symtab) <expand_psymtab>: New
method.
(struct legacy_psymtab) <expand_psymtab>: Implement.
<legacy_expand_psymtab>: New member.
* mdebugread.c (mdebug_read_symtab): Call expand_psymtab.
(parse_partial_symbols): Set legacy_expand_psymtab.
(psymtab_to_symtab_1): Change argument order. Call
expand_psymtab.
(new_psymtab): Set legacy_expand_psymtab.
* dwarf2read.h (struct dwarf2_psymtab) <expand_psymtab>: Declare.
* dwarf2read.c (dwarf2_psymtab::read_symtab): Call
expand_psymtab.
(dwarf2_psymtab::expand_psymtab): Rename from
psymtab_to_symtab_1. Call expand_psymtab.
* dbxread.c (start_psymtab): Set legacy_expand_psymtab.
(dbx_end_psymtab): Likewise.
(dbx_psymtab_to_symtab_1): Change argument order. Call
expand_psymtab.
(dbx_read_symtab): Call expand_psymtab.
* ctfread.c (struct ctf_psymtab) <expand_psymtab>: Declare.
(ctf_psymtab::expand_psymtab): Rename from psymtab_to_symtab.
(ctf_psymtab::read_symtab): Call expand_psymtab.
Change-Id: Ic39a2d7aa7b424088d910b59dbd21271fa1c3430
Each symbol reader implemented its own "Reading..." messages, and most
of them double-checked that a previously-expanded psymtab could not be
re-read.
This patch consolidates the message-printing, and changes these checks
into asserts.
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_read_symtab): Remove prints. Add assert.
* psymtab.c (psymtab_to_symtab): Print verbose "Reading"
messages.
* mdebugread.c (mdebug_read_symtab): Remove prints.
* dwarf2read.c (dwarf2_psymtab::read_symtab): Remove prints. Add
assert.
* dbxread.c (dbx_read_symtab): Remove prints. Add assert.
Change-Id: I795be9710d42708299bb7b44972cffd27aec9413
This introduces a new partial_symtab::read_symtab method, and updates
the symbol readers to subclass partial_symtab and implement this
method. The old read_symtab and read_symtab_private members are
removed.
In practice, only DWARF and CTF are truly updated to take advantage of
the new setup. The other symbol readers are less actively maintained,
and so this patch also introduces a "legacy_psymtab", which
essentially works the same way as the old partial_symtab.
(Note that, without more knowledge of the interaction between these
symbol readers, fixing this to remove the new (small) overhead is not
trivial, because these readers copy the read_symtab pointer between
partial symtabs.)
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* xcoffread.c (this_symtab_psymtab, read_xcoff_symtab)
(xcoff_psymtab_to_symtab_1, xcoff_read_symtab)
(xcoff_start_psymtab, xcoff_end_psymtab, scan_xcoff_symtab): Use
legacy_symtab.
* stabsread.h (dbx_end_psymtab): Use legacy_symtab.
* psymtab.c (psymtab_to_symtab): Call method.
(dump_psymtab): Update.
* psympriv.h (struct partial_symtab): Add virtual destructor.
<read_symtab>: New method.
(struct legacy_symtab): New.
* mdebugread.c (mdebug_read_symtab): Use legacy_psymtab.
(struct pst_map) <pst>: Now a legacy_psymtab.
(parse_procedure, parse_partial_symbols, psymtab_to_symtab_1)
(new_psymtab): Use legacy_psymtab.
* dwarf2read.h (struct dwarf2_psymtab): New.
(struct dwarf2_per_cu_data) <psymtab>: Use it.
* dwarf2read.c (dwarf2_create_include_psymtab)
(dwarf2_build_include_psymtabs, create_type_unit_group)
(create_partial_symtab, process_psymtab_comp_unit_reader)
(build_type_psymtabs_reader, build_type_psymtab_dependencies)
(set_partial_user): Use dwarf2_psymtab.
(dwarf2_psymtab::read_symtab): Rename from dwarf2_read_symtab.
(psymtab_to_symtab_1, process_full_comp_unit)
(process_full_type_unit, dwarf2_ranges_read)
(dwarf2_get_pc_bounds, psymtab_include_file_name)
(dwarf_decode_lines): Use dwarf2_psymtab.
* dwarf-index-write.c (psym_index_map): Use dwarf2_psymtab.
(add_address_entry_worker, write_one_signatured_type)
(recursively_count_psymbols, recursively_write_psymbols)
(write_one_signatured_type, psyms_seen_size, write_gdbindex)
(write_debug_names): Likewise.
* dbxread.c (struct header_file_location): Take a legacy_psymtab.
<pst>: Now a legacy_psymtab.
(find_corresponding_bincl_psymtab): Return a legacy_psymtab.
(read_dbx_symtab, start_psymtab, dbx_end_psymtab)
(dbx_psymtab_to_symtab_1, read_ofile_symtab): Use legacy_psymtab.
* ctfread.c (struct ctf_psymtab): New.
(ctf_start_symtab, ctf_end_symtab, psymtab_to_symtab): Take a
ctf_psymtab.
(ctf_psymtab::read_symtab): Rename from ctf_read_symtab.
(create_partial_symtab): Return a ctf_psymtab.
(scan_partial_symbols): Update.
Change-Id: Ia57a828786867d6ad03200af8f996f48ed15285e
This turns start_psymtab_common into a constructor, and then changes
the callers to use "new" directly. This completes the psymtab
allocation transition -- now it is possible for symbol readers to
subclass struct partial_symtab.
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_start_psymtab): Use new.
* psymtab.c (partial_symtab::partial_symtab): New constructor,
renamed from start_psymtab_common.
* psympriv.h (struct partial_symtab): Add new constructor.
(start_psymtab_common): Don't declare.
* mdebugread.c (parse_partial_symbols): Use new.
* dwarf2read.c (create_partial_symtab): Use new.
* dbxread.c (start_psymtab): Use new.
* ctfread.c (create_partial_symtab): Use new.
Change-Id: I5a0217bcb52bcfa442559771954bb66bd9ccbf02
This is the next step in getting the symbol readers to allocate
psymtabs themselves: change allocate_psymtab to be an ordinary
constructor, and then use "new" at the previous call sites. Note that
this doesn't get us all the way -- start_psymtab_common is still
allocating a partial symtab.
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_end_psymtab): Use new.
* psymtab.c (start_psymtab_common): Use new.
(partial_symtab::partial_symtab): Rename from allocate_psymtab.
Update.
* psympriv.h (struct partial_symtab): Add parameters to
constructor. Don't inline.
(allocate_psymtab): Don't declare.
* mdebugread.c (new_psymtab): Use new.
* dwarf2read.c (dwarf2_create_include_psymtab): Use new.
* dbxread.c (dbx_end_psymtab): Use new.
Change-Id: Iffeae64c925050b90b9916cbc36e15b26ff42226
Currently, partial symbol tables are allocated by a method in
psymtab_storage. However, eventually we want to subclass partial
symtabs in the symbol readers, so the calls to "new" will have to
happen there. This patch is a first step, moving the allocation from
psymtab_storage and into allocate_psymtab.
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* psymtab.h (class psymtab_storage) <install_psymtab>: Rename from
allocate_psymtab. Update documentation.
* psymtab.c (psymtab_storage::install_psymtab): Rename from
allocate_psymtab. Do not use new.
(allocate_psymtab): Use new. Update.
Change-Id: Iba6a9bf3ee1e78062fdb9f007c3010f826f64bc8
This changes psymtabs to be allocated with new and destroyed with
delete. As a consequence, the psymtab free-list is also removed.
The motivation for this is to let symbol readers subclass
partial_symtab.
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* mdebugread.c (parse_partial_symbols): Use discard_psymtab.
* psymtab.h (class psymtab_storage) <free_psymtabs>: Remove.
* psymtab.c (psymtab_storage): Delete psymtabs.
(psymtab_storage::allocate_psymtab): Use new.
(psymtab_storage::discard_psymtab): Use delete.
* psympriv.h (struct partial_symtab): Add constructor and
initializers.
Change-Id: I4e78ac538fc0ea52b57489c1afb8f935a30941ef
machoread.c does not need to include psympriv.h.
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* machoread.c: Do not include psympriv.h.
Change-Id: I6362bd2e95e7416cb9bae3d48b69dd6dbe4f2cc8
Mention in NEWS the new option and the set/show commands.
Document in gdb.texinfo the new option and the set/show commands.
gdb/ChangeLog
2020-01-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Mention the new option and the set/show commands.
gdb/doc/ChangeLog
2020-01-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Attach): Document the new option and the
set/show commands.
(Connecting): Reference the exec-file-mismatch option.
This option allows to tell GDB to detect and possibly handle mismatched exec-files.
A recurrent problem with GDB is that GDB uses the wrong exec-file
when using the attach/detach commands successively.
Also, in case the user specifies a file on the command line but attaches
to the wrong PID, this error is not made visible and gives a not user
understandable behaviour.
For example:
$ gdb
...
(gdb) atta 2682 ############################################ PID running 'sleepers' executable
Attaching to process 2682
[New LWP 2683]
[New LWP 2684]
[New LWP 2685]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
0x00007f5ff829f603 in select () at ../sysdeps/unix/syscall-template.S:84
84 ../sysdeps/unix/syscall-template.S: No such file or directory.
(gdb) det
Detaching from program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 2682
[Inferior 1 (process 2682) detached]
(gdb) atta 31069 ############################################ PID running 'gdb' executable
Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069
Reading symbols from /lib64/ld-linux-x86-64.so.2...
Reading symbols from /usr/lib/debug/.build-id/60/6df9c355103e82140d513bc7a25a635591c153.debug...
0x00007f43c23478a0 in ?? ()
(gdb) bt
#0 0x00007f43c23478a0 in ?? ()
#1 0x0000558909e3ad91 in ?? ()
#2 0x0000202962646700 in ?? ()
#3 0x00007ffc69c74e70 in ?? ()
#4 0x000055890c1d2350 in ?? ()
#5 0x0000000000000000 in ?? ()
(gdb)
The second attach has kept the executable of the first attach.
(in this case, 31069 is the PID of a GDB, that has nothing to do
with the first determined 'sleepers' executable).
Similarly, if specifying an executable, but attaching to a wrong pid,
we get:
gdb /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers
...
Reading symbols from /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers...
(gdb) atta 31069 ############################################ PID running 'gdb' executable
Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069
Reading symbols from /lib64/ld-linux-x86-64.so.2...
Reading symbols from /usr/lib/debug/.build-id/60/6df9c355103e82140d513bc7a25a635591c153.debug...
0x00007f43c23478a0 in ?? ()
(gdb) bt
#0 0x00007f43c23478a0 in ?? ()
#1 0x0000558909e3ad91 in ?? ()
#2 0x0000202962646700 in ?? ()
#3 0x00007ffc69c74e70 in ?? ()
#4 0x000055890c1d2350 in ?? ()
#5 0x0000000000000000 in ?? ()
(gdb)
And it is unclear to the user what has happened/what is going wrong.
This patch series implements a new option:
(gdb) apropos exec-file-mismatch
set exec-file-mismatch -- Set exec-file-mismatch handling (ask|warn|off).
show exec-file-mismatch -- Show exec-file-mismatch handling (ask|warn|off).
(gdb) help set exec-file-mismatch
Set exec-file-mismatch handling (ask|warn|off).
Specifies how to handle a mismatch between the current exec-file name
loaded by GDB and the exec-file name automatically determined when attaching
to a process:
ask - warn the user and ask whether to load the determined exec-file.
warn - warn the user, but do not change the exec-file.
off - do not check for mismatch.
"ask" means: in case of mismatch between the current exec-file name
and the automatically determined exec-file name of the PID we are attaching to,
give a warning to the user and ask whether to load the automatically determined
exec-file.
"warn" means: in case of mismatch, just give a warning to the user.
"off" means: do not check for mismatch.
This fixes PR gdb/17626.
There was a previous trial to fix this PR.
See https://sourceware.org/ml/gdb-patches/2015-07/msg00118.html
This trial was however only fixing the problem for the automatically
determined executable files when doing attach.
It was differentiating the 'user specified executable files' ("sticky")
from the executable files automatically found by GDB.
But such user specified sticky executables are in most cases due
to a wrong manipulation by the user, giving unexpected results
such as backtrace showing no function like in the above example.
This patch ensures that whenever a process executable can be
determined, that the user is warned if there is a mismatch.
The same tests as above then give:
(gdb) atta 2682
Attaching to process 2682
[New LWP 2683]
[New LWP 2684]
[New LWP 2685]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
0x00007f5ff829f603 in select () at ../sysdeps/unix/syscall-template.S:84
84 ../sysdeps/unix/syscall-template.S: No such file or directory.
(gdb) det
Detaching from program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 2682
[Inferior 1 (process 2682) detached]
(gdb) atta 31069
Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069
warning: Mismatch between current exec-file /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers
and automatically determined exec-file /bd/home/philippe/gdb/git/build_fixes/gdb/gdb
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/bd/home/philippe/gdb/git/build_fixes/gdb/gdb"? (y or n) y
Reading symbols from /bd/home/philippe/gdb/git/build_fixes/gdb/gdb...
Setting up the environment for debugging gdb.
...
Reading symbols from /usr/lib/debug/.build-id/60/6df9c355103e82140d513bc7a25a635591c153.debug...
0x00007f43c23478a0 in __poll_nocancel () at ../sysdeps/unix/syscall-template.S:84
84 ../sysdeps/unix/syscall-template.S: No such file or directory.
(top-gdb) bt
During symbol reading: incomplete CFI data; unspecified registers (e.g., rax) at 0x7f43c23478ad
During symbol reading: unsupported tag: 'DW_TAG_unspecified_type'
During symbol reading: cannot get low and high bounds for subprogram DIE at 0x12282a7
During symbol reading: Child DIE 0x12288ba and its abstract origin 0x1228b26 have different parents
During symbol reading: DW_AT_call_target target DIE has invalid low pc, for referencing DIE 0x1229540 [in module /bd/home/philippe/gdb/git/build_fixes/gdb/gdb]
#0 0x00007f43c23478a0 in __poll_nocancel () at ../sysdeps/unix/syscall-template.S:84
#1 0x0000558909e3ad91 in poll (__timeout=-1, __nfds=<optimized out>, __fds=<optimized out>) at /usr/include/x86_64-linux-gnu/bits/poll2.h:46
#2 gdb_wait_for_event (block=block@entry=1) at ../../fixes/gdb/event-loop.c:772
#3 0x0000558909e3aef4 in gdb_do_one_event () at ../../fixes/gdb/event-loop.c:347
#4 0x0000558909e3b085 in gdb_do_one_event () at ../../fixes/gdb/common/common-exceptions.h:219
#5 start_event_loop () at ../../fixes/gdb/event-loop.c:371
During symbol reading: Member function "~_Sp_counted_base" (offset 0x1c69bf7) is virtual but the vtable offset is not specified
During symbol reading: Multiple children of DIE 0x1c8f5a0 refer to DIE 0x1c8f0ee as their abstract origin
#6 0x0000558909ed3b78 in captured_command_loop () at ../../fixes/gdb/main.c:331
#7 0x0000558909ed4b6d in captured_main (data=<optimized out>) at ../../fixes/gdb/main.c:1174
#8 gdb_main (args=<optimized out>) at ../../fixes/gdb/main.c:1190
#9 0x0000558909c1e9a8 in main (argc=<optimized out>, argv=<optimized out>) at ../../fixes/gdb/gdb.c:32
(top-gdb)
gdb /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers
...
Reading symbols from /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers...
(gdb) atta 31069
Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069
warning: Mismatch between current exec-file /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers
and automatically determined exec-file /bd/home/philippe/gdb/git/build_fixes/gdb/gdb
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/bd/home/philippe/gdb/git/build_fixes/gdb/gdb"? (y or n) y
Reading symbols from /bd/home/philippe/gdb/git/build_fixes/gdb/gdb...
Setting up the environment for debugging gdb.
....
In other words, it now works as intuitively expected by the user.
If ever the user gave the correct executable on the command line,
then attached to the wrong pid, then confirmed loading the wrong executable,
the user can simply fix this by detaching, and attaching to the correct pid,
GDB will then tell again to the user that the exec-file might better
be loaded.
The default value of "ask" is chosen instead of e.g. "warn" as in most
cases, switching of executable will be the correct action,
and in any case, the user can decide to not load the executable,
as GDB asks a confirmation to the user to load the new executable.
For settings "ask" and "warn", the new function validate_exec_file ()
tries to get the inferior pid exec file and compares it with the current
exec file. In case of mismatch, it warns the user and optionally load
the executable.
This function is called in the attach_command implementation to cover
most cases of attaching to a running process.
It must also be called in remote.c, as the attach command is not supported
for all types of remote gdbserver.
gdb/ChangeLog
2020-01-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* exec.c (exec_file_mismatch_names, exec_file_mismatch_mode)
(show_exec_file_mismatch_command, set_exec_file_mismatch_command)
(validate_exec_file): New variables, enums, functions.
(exec_file_locate_attach, print_section_info): Style the filenames.
(_initialize_exec): Install show_exec_file_mismatch_command and
set_exec_file_mismatch_command.
* gdbcore.h (validate_exec_file): Declare.
* infcmd.c (attach_command): Call validate_exec_file.
* remote.c ( remote_target::remote_add_inferior): Likewise.
This commit improves GDB's handling of inline functions when there are
more than one inline function in a stack, so for example if we have a
stack like:
main -> aaa -> bbb -> ccc -> ddd
And aaa, bbb, and ccc are all inline within main GDB should (when
given sufficient debug information) be able to step from main through
aaa, bbb, and ccc. Unfortunately, this currently doesn't work, here's
an example session:
(gdb) start
Temporary breakpoint 1 at 0x4003b0: file test.c, line 38.
Starting program: /project/gdb/tests/inline/test
Temporary breakpoint 1, main () at test.c:38
38 global_var = 0;
(gdb) step
39 return aaa () + 1;
(gdb) step
aaa () at test.c:39
39 return aaa () + 1;
(gdb) step
bbb () at test.c:39
39 return aaa () + 1;
(gdb) step
ccc () at test.c:39
39 return aaa () + 1;
(gdb) step
ddd () at test.c:32
32 return global_var;
(gdb) bt
#0 ddd () at test.c:32
#1 0x00000000004003c1 in ccc () at test.c:39
#2 bbb () at test.c:26
#3 aaa () at test.c:14
#4 main () at test.c:39
Notice that once we get to line 39 in main, GDB keeps reporting line
39 in main as the location despite understanding that the inferior is
stepping through the nested inline functions with each use of step.
The problem is that as soon as the inferior stops we call
skip_inline_frames (from inline-frame.c) which calculates the
inferiors current state in relation to inline functions - it figures
out if we're in an inline function, and if we are counts how many
inline frames there are at the current location.
So, in our example above, when we step from line 38 in main to line 39
we stop at a location that is simultaneously in all of main, aaa, bbb,
and ccc. The block structure reflects the order in which the
functions would be called, with ccc being the most inner block and
main being the most outer block. When we stop GDB naturally finds the
block for ccc, however within skip_inline_frames we spot that bbb,
aaa, and main are super-blocks of the current location and that each
layer represents an inline function. The skip_inline_frames then
records the depth of inline functions (3 in this case for aaa, bbb,
and ccc) and also the symbol of the outermost inline function (in this
case 'aaa' as main isn't an inline function, it just has things inline
within it).
Now GDB understands the stack to be main -> aaa -> bbb -> ccc,
however, the state initialised in skip_inline_frames starts off
indicating that we should hide 3 frames from the user, so we report
that we're in main at line 39. The location of main, line 39 is
derived by asking the inline function state for the last symbol in the
stack (aaa in this case), and then asking for it's location - the
location of an inlined function symbol is its call site, so main, line
39 in this case.
If the user then asks GDB to step we don't actually move the inferior
at all, instead we spot that we are in an inline function stack,
lookup the inline state data, and reduce the skip depth by 1. We then
report to the user that GDB has stopped. GDB now understands that we
are in 'aaa'. In order to get the precise location we again ask GDB
for the last symbol from the inline data structure, and we are again
told 'aaa', we then get the location from 'aaa', and report that we
are in main, line 39.
Hopefully it's clear what the mistake here is, once we've reduced the
inline skip depth we should not be using 'aaa' to compute the precise
location, instead we should be using 'bbb'. That is what this patch
does.
Now, when we call skip_inline_frames instead of just recording the
last skipped symbol we now record all symbols in the inline frame
stack. When we ask GDB for the last skipped symbol we return a symbol
based on how many frames we are skipping, not just the last know
symbol.
With this fix in place, the same session as above now looks much
better:
(gdb) start
Temporary breakpoint 1 at 0x4003b0: file test.c, line 38.
Starting program: /project/gdb/tests/inline/test
Temporary breakpoint 1, main () at test.c:38
38 global_var = 0;
(gdb) s
39 return aaa () + 1;
(gdb) s
aaa () at test.c:14
14 return bbb () + 1;
(gdb) s
bbb () at test.c:26
26 return ccc () + 1;
(gdb) s
ccc () at test.c:20
20 return ddd () + 1;
(gdb) s
ddd () at test.c:32
32 return global_var;
(gdb) bt
#0 ddd () at test.c:32
#1 0x00000000004003c1 in ccc () at test.c:20
#2 bbb () at test.c:26
#3 aaa () at test.c:14
#4 main () at test.c:39
gdb/ChangeLog:
* frame.c (find_frame_sal): Move call to get_next_frame into more
inner scope.
* inline-frame.c (inilne_state) <inline_state>: Update argument
types.
(inilne_state) <skipped_symbol>: Rename to...
(inilne_state) <skipped_symbols>: ...this, and change to a vector.
(skip_inline_frames): Build vector of skipped symbols and use this
to reate the inline_state.
(inline_skipped_symbol): Add a comment and some assertions, fetch
skipped symbol from the list.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-inline-many-frames.c: New file.
* gdb.dwarf2/dw2-inline-many-frames.exp: New file.
Change-Id: I99def5ffb44eb9e58cda4b449bf3d91ab0386c62
Don't reorder line table entries for the same address when sorting the
line table, maintain the compiler given line order. Usually this will
reflect the order in which lines are conceptually encountered at a
given address.
Consider this example:
/* 1 */ volatile int global_var;
/* 2 */ int __attribute__ ((noinline))
/* 3 */ bar ()
/* 4 */ {
/* 5 */ return global_var;
/* 6 */ }
/* 7 */ static inline int __attribute__ ((always_inline))
/* 8 */ foo ()
/* 9 */ {
/* 10 */ return bar ();
/* 11 */ }
/* 12 */ int
/* 13 */ main ()
/* 14 */ {
/* 15 */ global_var = 0;
/* 16 */ return foo ();
/* 17 */ }
GCC 10 currently generates a line table like this (as shown by
objdump):
CU: ./test.c:
File name Line number Starting address
test.c 4 0x4004b0
test.c 5 0x4004b0
test.c 6 0x4004b6
test.c 6 0x4004b7
test.c 14 0x4003b0
test.c 15 0x4003b0
test.c 16 0x4003ba
test.c 10 0x4003ba
test.c 10 0x4003c1
The interesting entries are those for lines 16 and 10 at address
0x4003ba, these represent the call to foo and the inlined body of
foo.
With the current line table sorting GDB builds the line table like
this (as shown by 'maintenance info line-table'):
INDEX LINE ADDRESS
0 14 0x00000000004003b0
1 15 0x00000000004003b0
2 10 0x00000000004003ba
3 16 0x00000000004003ba
4 END 0x00000000004003c1
5 4 0x00000000004004b0
6 5 0x00000000004004b0
7 END 0x00000000004004b7
Notice that entries 2 and 3 for lines 10 and 16 are now in a different
order to the line table as given by the compiler. With this patch
applied the order is now:
INDEX LINE ADDRESS
0 14 0x00000000004003b0
1 15 0x00000000004003b0
2 16 0x00000000004003ba
3 10 0x00000000004003ba
4 END 0x00000000004003c1
5 4 0x00000000004004b0
6 5 0x00000000004004b0
7 END 0x00000000004004b7
Notice that entries 2 and 3 are now in their original order again.
The consequence of the incorrect ordering is that when stepping
through inlined functions GDB will display the wrong line for the
inner most frame. Here's a GDB session before this patch is applied:
Starting program: /home/andrew/tmp/inline/test
Temporary breakpoint 1, main () at test.c:15
15 /* 15 */ global_var = 0;
(gdb) step
16 /* 16 */ return foo ();
(gdb) step
foo () at test.c:16
16 /* 16 */ return foo ();
(gdb) step
bar () at test.c:5
5 /* 5 */ return global_var;
The step from line 15 to 16 was fine, but the next step should have
taken us to line 10, instead we are left at line 16. The final step
to line 5 is as expected.
With this patch applied the session goes better:
Starting program: /home/andrew/tmp/inline/test
Temporary breakpoint 1, main () at test.c:15
15 /* 15 */ global_var = 0;
(gdb) step
16 /* 16 */ return foo ();
(gdb) step
foo () at test.c:10
10 /* 10 */ return bar ();
(gdb) step
bar () at test.c:5
5 /* 5 */ return global_var;
We now visit the lines as 15, 16, 10, 5 as we would like.
The reason for this issue is that the inline frame unwinder is
detecting that foo is inlined in main. When we stop at the shared
address 0x4003ba the inline frame unwinder first shows us the outer
frame, this information is extracted from the DWARF's
DW_TAG_inlined_subroutine entries and passed via GDB's block data.
When we step again the inlined frame unwinder moves us up the call
stack to the inner most frame at which point the frame is displayed as
normal, with the location for the address being looked up in the line
table.
As GDB uses the last line table entry for an address as "the" line to
report for that address it is critical that GDB maintain the order of
the line table entries. In the first case, by reordering the line
table we report the wrong location.
I had to make a small adjustment in find_pc_sect_line in order to
correctly find the previous line in the line table. In some line
tables I was seeing an actual line entry and an end of sequence marker
at the same address, before this commit these would reorder to move
the end of sequence marker before the line entry (end of sequence has
line number 0). Now the end of sequence marker remains in its correct
location, and in order to find a previous line we should step backward
over any end of sequence markers.
As an example, the binary:
gdb/testsuite/outputs/gdb.dwarf2/dw2-ranges-func/dw2-ranges-func-lo-cold
Has this line table before the patch:
INDEX LINE ADDRESS
0 48 0x0000000000400487
1 END 0x000000000040048e
2 52 0x000000000040048e
3 54 0x0000000000400492
4 56 0x0000000000400497
5 END 0x000000000040049a
6 62 0x000000000040049a
7 END 0x00000000004004a1
8 66 0x00000000004004a1
9 68 0x00000000004004a5
10 70 0x00000000004004aa
11 72 0x00000000004004b9
12 END 0x00000000004004bc
13 76 0x00000000004004bc
14 78 0x00000000004004c0
15 80 0x00000000004004c5
16 END 0x00000000004004cc
And after this patch:
INDEX LINE ADDRESS
0 48 0x0000000000400487
1 52 0x000000000040048e
2 END 0x000000000040048e
3 54 0x0000000000400492
4 56 0x0000000000400497
5 END 0x000000000040049a
6 62 0x000000000040049a
7 66 0x00000000004004a1
8 END 0x00000000004004a1
9 68 0x00000000004004a5
10 70 0x00000000004004aa
11 72 0x00000000004004b9
12 END 0x00000000004004bc
13 76 0x00000000004004bc
14 78 0x00000000004004c0
15 80 0x00000000004004c5
16 END 0x00000000004004cc
When calling find_pc_sect_line with the address 0x000000000040048e, in
both cases we find entry #3, we then try to find the previous entry,
which originally found this entry '2 52 0x000000000040048e',
after the patch it finds '2 END 0x000000000040048e', which
cases the lookup to fail.
By skipping the END marker after this patch we get back to the correct
entry, which is now #1: '1 52 0x000000000040048e', and
everything works again.
gdb/ChangeLog:
* buildsym.c (lte_is_less_than): Delete.
(buildsym_compunit::end_symtab_with_blockvector): Create local
lambda function to sort line table entries, and use
std::stable_sort instead of std::sort.
* symtab.c (find_pc_sect_line): Skip backward over end of sequence
markers when looking for a previous line.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-inline-stepping.c: New file.
* gdb.dwarf2/dw2-inline-stepping.exp: New file.
Change-Id: Ia0309494be4cfd9dcc554f30209477f5f040b21b
In this commit:
commit d9b3de22f3
Date: Wed May 27 14:44:29 2015 -0700
Add struct to record dwarf line number state machine.
I believe an unintended change was made to how we store the DWARF line
table, the end of sequence markers between sequences of lines were
lost from the line table.
This commit fixes this small oversight and restores the end of
sequence markers.
Given that we've survived this long without noticing is clearly an
indication that this isn't that serious, however, a later patch that I
am developing would benefit from having the markers in place, so I'd
like to restore them.
Having the markers also means that the output of 'maintenance info
line-table' now more closely reflects the DWARF line table.
I've taken this opportunity to improve how 'maintenance info
line-table' displays the end of sequence markers - it now uses the END
keyword, rather than just printing an entry with line number 0. So we
see this:
INDEX LINE ADDRESS
0 12 0x00000000004003b0
1 17 0x00000000004003b0
2 18 0x00000000004003b0
3 END 0x00000000004003b7
4 5 0x00000000004004a0
5 6 0x00000000004004a0
6 END 0x00000000004004a7
Instead of what we would have seen, which was this:
INDEX LINE ADDRESS
0 12 0x00000000004003b0
1 17 0x00000000004003b0
2 18 0x00000000004003b0
3 0 0x00000000004003b7
4 5 0x00000000004004a0
5 6 0x00000000004004a0
6 0 0x00000000004004a7
I've added a small test that uses 'maintenance info line-table' to
ensure that we don't regress this again.
gdb/ChangeLog:
* dwarf2read.c (lnp_state_machine::record_line): Include
end_sequence parameter in debug print out. Record the line if we
are at an end_sequence marker even if it's not the start of a
statement.
* symmisc.c (maintenance_print_one_line_table): Print end of
sequence markers with 'END' not '0'.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Update line table parsing test.
* gdb.dwarf2/dw2-ranges-base.exp: Add new line table parsing test.
Change-Id: I002f872248db82a1d4fefdc6b51ff5dbf932d8a8
This fixes a latent bug exposed by the multi-target patch (5b6d1e4fa
"Multi-target support), and then fixes two other latent bugs exposed
by fixing that first latent bug.
The symptom described in the bug report is that starting a first
inferior, then trying to run a second (multi-threaded) inferior twice,
causes libthread_db to fail to load, along with other erratic
behavior:
(gdb) run
Starting program: /tmp/foo
warning: td_ta_new failed: generic error
Going a bit deeply, I found that if the two inferiors have different
symbols, we can see that just after inferior 2 exits, we are left with
inferior 2 selected, which is correct, but the symbols in scope belong
to inferior 1, which is obviously incorrect...
This problem is that there's a path in
scoped_restore_current_thread::restore() that switches to no thread
selected, and switches the current inferior, but leaves the current
program space as is, resulting in leaving the program space pointing
to the wrong program space (the one of the other inferior). This was
happening after handling TARGET_WAITKIND_NO_RESUMED, which is an event
that triggers after TARGET_WAITKIND_EXITED for the previous inferior
exit. Subsequent symbol lookups find the symbols of the wrong
inferior.
The fix is to use switch_to_inferior_no_thread in that problem spot.
This function was recently added along with the multi-target work
exactly for these situations.
As for testing, this patch adds a new testcase that tests symbol
printing just after inferior exit, which exercises the root cause of
the problem more directly. And then, to cover the use case described
in the bug too, it also exercises the lithread_db.so mis-loading, by
using TLS printing as a proxy for being sure that threaded debugging
was activated sucessfully. The testcase fails without the fix like
this, for the "print symbol just after exit" bits:
...
[Inferior 1 (process 8719) exited normally]
(gdb) PASS: gdb.multi/multi-re-run.exp: re_run_inf=1: iter=1: continue until exit
print re_run_var_1
No symbol "re_run_var_1" in current context.
(gdb) FAIL: gdb.multi/multi-re-run.exp: re_run_inf=1: iter=1: print re_run_var_1
...
And like this for the "libthread_db.so loading" bits:
(gdb) run
Starting program: /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.multi/multi-re-run/multi-re-run
warning: td_ta_new failed: generic error
[New LWP 27001]
Thread 1.1 "multi-re-run" hit Breakpoint 3, all_started () at /home/pedro/gdb/binutils-gdb/build/../src/gdb/testsuite/gdb.multi/multi-re-run.c:44
44 }
(gdb) PASS: gdb.multi/multi-re-run.exp: re_run_inf=1: iter=2: running to all_started in runto
print tls_var
Cannot find thread-local storage for LWP 27000, executable file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.multi/multi-re-run/multi-re-run:
Cannot find thread-local variables on this target
(gdb) FAIL: gdb.multi/multi-re-run.exp: re_run_inf=1: iter=2: print tls_var
As mentioned, that fix above goes on to expose a couple other latent
bugs. This commit fixes those as well.
The first latent bug exposed is in
infrun.c:handle_vfork_child_exec_or_exit. The current code is leaving
inf->pspace == NULL while calling clone_program_space. The idea was
to make it so that the breakpoints module doesn't use this inferior's
pspace to set breakpoints. With that, any
scoped_restore_current_thread use from within clone_program_space
tries to restore a NULL program space, which hits an assertion:
Attaching after Thread 0x7ffff74b8700 (LWP 27276) vfork to child process 27277]
[New inferior 2 (process 27277)]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
/home/pedro/gdb/binutils-gdb/build/../src/gdb/progspace.c:243: internal-error: void set_current_program_space(program_space*): Assertion `pspace != NULL' faile
d.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/vfork-follow-child-exit.exp: detach-on-fork=off: continue (GDB internal error)
That NULL pspace idea was legitimate, but it's no longer necessary,
since commit b2e586e850 ("Defer breakpoint reset when cloning
progspace for fork child"). So the fix is to just set the inferior's
program space earlier.
The other latent bug exposed is in exec.c. When exec_close is called
from the program_space destructor, it is purposedly called with a
current program space that is not the current inferior's program
space. The problem is that the multi-target work added some code to
remove_target_sections that loops over all inferiors, and uses
scoped_restore_current_thread to save/restore the previous
thread/inferior/frame state. This makes it so that exec_close returns
with the current program space set to the current inferior's program
space, which is exactly what we did not want. Then the program_space
destructor continues into free_all_objfiles, but it is now running
that method on the wrong program space, resulting in:
Reading symbols from /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.threads/fork-plus-threads/fork-plus-threads...
Reading symbols from /usr/lib/debug/usr/lib64/libpthread-2.26.so.debug...
Reading symbols from /usr/lib/debug/usr/lib64/libm-2.26.so.debug...
Reading symbols from /usr/lib/debug/usr/lib64/libc-2.26.so.debug...
Reading symbols from /usr/lib/debug/usr/lib64/ld-2.26.so.debug...
[Inferior 3 (process 9583) exited normally]
/home/pedro/gdb/binutils-gdb/build/../src/gdb/progspace.c:170: internal-error: void program_space::free_all_objfiles(): Assertion `so->objfile == NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited (GDB internal error)
The fix is to use scoped_restore_current_pspace_and_thread instead of
scoped_restore_current_thread.
gdb/ChangeLog:
2020-01-24 Pedro Alves <palves@redhat.com>
PR gdb/25410
* thread.c (scoped_restore_current_thread::restore): Use
switch_to_inferior_no_thread.
* exec.c: Include "progspace-and-thread.h".
(add_target_sections, remove_target_sections):
scoped_restore_current_pspace_and_thread instead of
scoped_restore_current_thread.
* infrun.c (handle_vfork_child_exec_or_exit): Assign the pspace
and aspace to the inferior before calling clone_program_space.
Remove stale comment.
gdb/testsuite/ChangeLog:
2020-01-24 Pedro Alves <palves@redhat.com>
PR gdb/25410
* gdb.multi/multi-re-run-1.c: New.
* gdb.multi/multi-re-run-2.c: New.
* gdb.multi/multi-re-run.exp: New.
Fixes a compile error because the class is actually called
arm_netbsd_nat_target.
gdb/ChangeLog:
2020-01-24 Christian Biesinger <cbiesinger@google.com>
* arm-nbsd-nat.c (arm_nbsd_nat_target::fetch_registers): Rename to...
(arm_netbsd_nat_target::fetch_registers): ...this.
(arm_nbsd_nat_target::store_registers): Rename to...
(arm_netbsd_nat_target::store_registers): ...this.
Change-Id: Ibebfab9edeff48f54c32d0745afda1d74d31de92
Fixes the below compile error on ARM NetBSD 9.0_RC1 (the only version I
tested). types.h does not define register_t by default.
We already use this define elsewhere, notably in bsd-kvm.c.
In file included from ../../gdb/arm-nbsd-nat.c:28:
/usr/include/machine/frame.h:54:2: error: unknown type name 'register_t'; did you mean '__register_t'?
register_t tf_spsr;
^
/usr/include/machine/types.h:77:14: note: '__register_t' declared here
typedef int __register_t;
^
There are other compile errors that this does not fix.
gdb/ChangeLog:
2020-01-24 Christian Biesinger <cbiesinger@google.com>
* arm-nbsd-nat.c: Define _KERNTYPES to get the declaration of
register_t.
Change-Id: I82c21d38189ee59ea0af2538ba84b771d268722e
regset_from_core_section doesn't exist anymore; it has been replaced
by the iterate_over_regset_sections gdbarch method. Update comments
accordingly to not confuse readers.
gdb/ChangeLog:
2020-01-24 Christian Biesinger <cbiesinger@google.com>
* aarch64-fbsd-tdep.c (aarch64_fbsd_iterate_over_regset_sections):
Update comment.
* aarch64-linux-tdep.c (aarch64_linux_iterate_over_regset_sections):
Likewise.
* arm-fbsd-tdep.c (arm_fbsd_iterate_over_regset_sections): Likewise.
* gdbcore.h (deprecated_add_core_fns): Update comment to point to
the correct replacement (iterate_over_regset_sections).
* riscv-fbsd-tdep.c (riscv_fbsd_iterate_over_regset_sections):
Update comment.
Change-Id: I5eea4d18e15edae5d6dfd5d0d6241e5b2ae40daa
This is an update of this patch:
https://sourceware.org/ml/gdb-patches/2018-09/msg00884.html
This patch attempts to address PR gdb/23718 by re-enabling stdin
whenever an exception is caught during gdb.execute().
When Python gdb.execute() is called, an exception could occur (e.g. the
target disappearing), which is then converted into a Python exception. If
stdin was disabled before the exception is caught, it is not re-enabled,
because the exception doesn't propagate to the top level of the event loop,
whose catch block would otherwise enable it.
The result is that when execution of a Python script completes, GDB does
not prompt or accept input, and is effectively hung.
This change rectifies the issue by re-enabling stdin in the catch block of
execute_gdb_command, prior to converting the exception to a Python
exception.
Since this patch was originally posted I've added a test, and also I
converted the code to re-enable stdin from this:
SWITCH_THRU_ALL_UIS ()
{
async_enable_stdin ();
}
to simply this:
async_enable_stdin ();
My reasoning is that we only need the SWITCH_THRU_ALL_UIS if, at the time
the exception is caught, the current_ui might be different than at the time
we called async_disable_stdin. Within python's execute_gdb_command I think
it should be impossible to switch current_ui, so the SWITCH_THRU_ALL_UIS
isn't needed.
gdb/ChangeLog:
PR gdb/23718
* gdb/python/python.c (execute_gdb_command): Call
async_enable_stdin in catch block.
gdb/testsuite/ChangeLog:
PR gdb/23718
* gdb.server/server-kill-python.exp: New file.
Change-Id: I1cfc36ee9f8484cc1ed82be9be338353db6bc080
If we catch an exception in start_event_loop's call to
gdb_do_one_event, then it is possible that the current_ui has changed
since we called async_disable_stdin. If that's the case then calling
async_enable_stdin will be called on the wrong UI.
To solve this problem we wrap the call to async_enable_stdin with
SWITCH_THRU_ALL_UIS, this causes us to try and re-enable stdin for all
UIs, which will catch any for which we called async_disable_stdin.
gdb/ChangeLog:
* event-loop.c (start_event_loop): Wrap async_enable_stdin with
SWITCH_THRU_ALL_UIS.
gdb/testsuite/ChangeLog:
* gdb.server/multi-ui-errors.c: New file.
* gdb.server/multi-ui-errors.exp: New file.
Change-Id: I1e18deff2e6f4e17f7a13adce3553eb001cad93b
This started as a patch to enable the asm window to handle attempts to
disassemble invalid memory, but it ended up expanding into a
significant rewrite of how the asm window handles scrolling. These
two things ended up being tied together as it was impossible to
correctly test scrolling into invalid memory when the asm window would
randomly behave weirdly while scrolling.
Things that should work nicely now; scrolling to the bottom or top of
the listing with PageUp, PageDown, Up Arrow, Down Arrow and we should
be able to scroll past small areas of memory that don't have symbols
associated with them. It should also be possible to scroll to the
start of a section even if there's no symbol at the start of the
section.
Adding tests for this scrolling was a little bit of a problem. First
I would have liked to add tests for PageUp / PageDown, but the tuiterm
library we use doesn't support these commands right now due to only
emulating a basic ascii terminal. Changing this to emulate a more
complex terminal would require adding support for more escape sequence
control codes, so I've not tried to tackle that in this patch.
Next, I would have liked to test scrolling to the start or end of the
assembler listing and then trying to scroll even more, however, this
is a problem because in a well behaving GDB a scroll at the start/end
has no effect. What we need to do is:
- Move to start of assembler listing,
- Send scroll up command,
- Wait for all curses output,
- Ensure the assembler listing is unchanged, we're still at the
start of the listing.
The problem is that there is no curses output, so how long do we wait
at step 3? The same problem exists for scrolling to the bottom of the
assembler listing. However, when scrolling down you can at least see
the end coming, so I added a test for this case, however, this feels
like an area of code that is massively under tested.
gdb/ChangeLog:
PR tui/9765
* minsyms.c (lookup_minimal_symbol_by_pc_section): Update header
comment, add extra parameter, and update to store previous symbol
when appropriate.
* minsyms.h (lookup_minimal_symbol_by_pc_section): Update comment,
add extra parameter.
* tui/tui-disasm.c (tui_disassemble): Update header comment,
remove unneeded parameter, add try/catch around gdb_print_insn,
rewrite to add items to asm_lines vector.
(tui_find_backward_disassembly_start_address): New function.
(tui_find_disassembly_address): Updated throughout.
(tui_disasm_window::set_contents): Update for changes to
tui_disassemble.
(tui_disasm_window::do_scroll_vertical): No need to adjust the
number of lines to scroll.
gdb/testsuite/ChangeLog:
PR tui/9765
* gdb.tui/tui-layout-asm.exp: Add scrolling test for asm window.
Change-Id: I323987c8fd316962c937e73c17d952ccd3cfa66c
The pattern
objfile->section_offsets[SECT_OFF_TEXT (objfile)]
... appears very often, to get the offset of the text section of an
objfile. I thought it would be more readable to write it as:
objfile->text_section_offset ()
... so I added this method and used it where possible. I also added
data_section_offset, although it is not used as much.
gdb/ChangeLog:
* objfiles.h (ALL_OBJFILE_OSECTIONS): Move up.
(SECT_OFF_DATA): Likewise.
(SECT_OFF_RODATA): Likewise.
(SECT_OFF_TEXT): Likewise.
(SECT_OFF_BSS): Likewise.
(struct objfile) <text_section_offset, data_section_offset>: New
methods.
* amd64-windows-tdep.c (amd64_windows_find_unwind_info): Use
objfile::text_section_offset.
* coff-pe-read.c (add_pe_forwarded_sym): Likewise.
* coffread.c (coff_symtab_read): Likewise.
(enter_linenos): Likewise.
(process_coff_symbol): Likewise.
* ctfread.c (get_objfile_text_range): Likewise.
* dtrace-probe.c (dtrace_probe::get_relocated_address):
Use objfile::data_section_offset.
* dwarf2-frame.c (execute_cfa_program): Use
objfile::text_section_offset.
(dwarf2_frame_find_fde): Likewise.
* dwarf2read.c (create_addrmap_from_index): Likewise.
(create_addrmap_from_aranges): Likewise.
(dw2_find_pc_sect_compunit_symtab): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(add_partial_symbol): Likewise.
(add_partial_subprogram): Likewise.
(process_full_comp_unit): Likewise.
(read_file_scope): Likewise.
(read_func_scope): Likewise.
(read_lexical_block_scope): Likewise.
(read_call_site_scope): Likewise.
(dwarf2_rnglists_process): Likewise.
(dwarf2_ranges_process): Likewise.
(dwarf2_ranges_read): Likewise.
(dwarf_decode_lines_1): Likewise.
(new_symbol): Likewise.
(dwarf2_fetch_die_loc_sect_off): Likewise.
(dwarf2_per_cu_text_offset): Likewise.
* hppa-bsd-tdep.c (hppabsd_find_global_pointer): Likewise.
* hppa-tdep.c (read_unwind_info): Likewise.
* ia64-tdep.c (ia64_find_unwind_table): Likewise.
* psympriv.h (struct partial_symtab): Likewise.
* psymtab.c (find_pc_sect_psymtab): Likewise.
* solib-svr4.c (enable_break): Likewise.
* stap-probe.c (relocate_address): Use
objfile::data_section_offset.
* xcoffread.c (enter_line_range): Use
objfile::text_section_offset.
(read_xcoff_symtab): Likewise.
We encounter this error when building on macOS with GCC.
CXX darwin-nat.o
/src-local/binutils-gdb/gdb/darwin-nat.c: In member function 'ptid_t darwin_nat_target::wait_1(ptid_t, target_waitstatus*)':
/src-local/binutils-gdb/gdb/darwin-nat.c:1264:18: error: declaration of 'inf' shadows a previous local [-Werror=shadow=compatible-local]
for (inferior *inf : all_inferiors (this))
^~~
/src-local/binutils-gdb/gdb/darwin-nat.c:1205:20: note: shadowed declaration is here
struct inferior *inf;
^~~
Fix it by moving the declaration of `inf` in the specific scopes that
need it. I think it's clearer this way anyway, as it shows that it's
not the same `inf` that is used in these different scopes.
Thanks to Iain Sandoe for reporting this. I did not see this error at
first, because I compile with the default system compiler on macOS,
which is clang. The compiler flag we try to enable for this is
`-Wshadow=local`, which is not one recognized by clang. I checked to
see if there would a version of the -Wshadow* warnings [1] we could
enable for clang, that would catch this, but the only one that would is
`-Wshadow` itself, and this is too invasive for us (which is why we
enabled just -Wshadow=local in the first place).
[1] https://clang.llvm.org/docs/DiagnosticsReference.html#wshadow
gdb/ChangeLog:
* darwin-nat.c (darwin_nat_target::wait_1): Move `inf`
declaration to narrower scopes.
The darwin-nat.c file doesn't build since the multi-target changes
(5b6d1e4f, "Multi-target support"). This patch makes it build. I have
access to a macOS vm, so I am able to build it, but I wasn't able to
successfully codesign it and try to actually debug something, so I don't
know if it works. I don't have much more time to put on this to figure
it out, so I thought I'd sent the patch anyway, as it's at least a step
in the right direction.
The bulk of the patch is to change a bunch of functions to be methods of
the darwin_nat_target object, so that this can pass `this` to
find_inferior_ptid and other functions that now require a
process_stratum_target pointer.
The darwin_ptrace_him function (renamed to darwin_nat_target::ptrace_him
in this patch) is passed to fork_inferior as the `init_trace_fun`
parameter. Since the method can't be passed as a plain function pointer
(we need the `this` pointer), I changed the `init_trace_fun` parameter
of fork_inferior to be a gdb::function_view, so we can pass a lambda and
capture `this`.
The changes in darwin-nat.h are only to move definition higher in the
file, so that forward declarations are not needed.
gdb/ChangeLog:
* darwin-nat.h (struct darwin_exception_msg, enum
darwin_msg_state, struct darwin_thread_info, darwin_thread_t):
Move up.
(class darwin_nat_target) <wait_1, check_new_threads,
decode_exception_message, decode_message, stop_inferior,
init_thread_list, ptrace_him, cancel_breakpoint>: Declare.
* darwin-nat.c (darwin_check_new_threads): Rename to...
(darwin_nat_target::check_new_threads): ... this.
(darwin_suspend_inferior_it): Remove.
(darwin_decode_exception_message): Rename to...
(darwin_nat_target::decode_exception_message): ... this.
(darwin_nat_target::resume): Pass target to find_inferior_ptid.
(darwin_decode_message): Rename to...
(darwin_nat_target::decode_message): ... this.
(cancel_breakpoint): Rename to...
(darwin_nat_target::cancel_breakpoint): ... this.
(darwin_wait): Rename to...
(darwin_nat_target::wait_1): ... this. Use range-based for loop
instead of iterate_over_inferiors.
(darwin_nat_target::wait): Call wait_1 instead of darwin_wait.
(darwin_stop_inferior): Rename to...
(darwin_nat_target::stop_inferior): ... this.
(darwin_nat_target::kill): Call wait_1 instead of darwin_wait.
(darwin_init_thread_list): Rename to...
(darwin_nat_target::init_thread_list): ... this.
(darwin_ptrace_him): Rename to...
(darwin_nat_target::ptrace_him): ... this.
(darwin_nat_target::create_inferior): Pass lambda function to
fork_inferior.
(darwin_nat_target::detach): Call stop_inferior instead of
darwin_stop_inferior.
* fork-inferior.h (fork_inferior): Change init_trace_fun
parameter to gdb::function_view.
* fork-inferior.c (fork_inferior): Likewise.
Each time a dll is loaded, update_solib_list is called.
This in turn calls deep down xfer_partial -> windows_xfer_shared_libraries,
which calls windows_xfer_shared_library for each loaded dll,
and pe_text_section_offset reads the dll for the text section offset.
Also if the data provided by xfer_partial is bigger than 4K,
then all of this is done for each 4K chunk (see target_read_alloc_1).
Caching of the text section offset improves the startup time of
an application with >300 dynamically loaded plugins from 2m10s to 10s.
And the shutdown time improves from 2m to 2s.
gdb/ChangeLog:
2020-01-23 Hannes Domani <ssbssa@yahoo.de>
* i386-cygwin-tdep.c (core_process_module_section): Update.
* windows-nat.c (struct lm_info_windows): Add text_offset.
(windows_xfer_shared_libraries): Update.
* windows-tdep.c (windows_xfer_shared_library):
Add text_offset_cached argument.
* windows-tdep.h (windows_xfer_shared_library): Update.
In commit
gdb: add back declarations for _initialize functions
6c2659886f
I wrongfully edited gdbarch.c, instead of editing gdbarch.sh and
re-generating gdbarch.c. This patch fixes gdbarch.sh to add a
declaration for _initialize_gdbarch. gdbarch.c is not changed, as the
output of gdbarch.sh now matches the current state of gdbarch.c.
gdb/ChangeLog:
* gdbarch.sh: Add declaration for _initialize_gdbarch.
This removes the two uses of iterate_over_inferiors, in favor of
range-based loops.
gdb/ChangeLog:
* remote-sim.c (check_for_duplicate_sim_descriptor): Remove.
(get_sim_inferior_data): Remove use of iterate_over_inferiors,
replace with range-based for.
(gdbsim_interrupt_inferior): Remove.
(gdbsim_target::interrupt): Replace iterate_over_inferiors use
with a range-based for. Inline code from
gdbsim_interrupt_inferior.
While GNU Source Highlight is good, it's also difficult to build and
distribute. For one thing, it needs Boost. For another, it has an
unusual configuration and installation setup.
Pygments, a Python library, doesn't suffer from these issues, and so I
thought it would be a reasonable fallback.
This patch implements this idea. GNU Source Highlight is preferred,
but if it is unavailable (or fails), the extension languages are
tried. This patch also implements support for Pygments.
Something similar could be done for Guile, using:
https://dthompson.us/projects/guile-syntax-highlight.html
However, I don't know enough about Guile internals to make this
happen, so I have not done it here.
gdb/ChangeLog
2020-01-21 Tom Tromey <tromey@adacore.com>
* source-cache.c (source_cache::ensure): Call ext_lang_colorize.
* python/python.c (python_extension_ops): Update.
(gdbpy_colorize): New function.
* python/lib/gdb/__init__.py (colorize): New function.
* extension.h (ext_lang_colorize): Declare.
* extension.c (ext_lang_colorize): New function.
* extension-priv.h (struct extension_language_ops) <colorize>: New
member.
* cli/cli-style.c (_initialize_cli_style): Update help text.
Change-Id: I5e21623ee05f1f66baaa6deaeca78b578c031bf4
As suggested, the cond variable is really supposed to be a bool. So,
make it so.
gdb/ChangeLog:
2020-01-21 Luis Machado <luis.machado@linaro.org>
* aarch64-tdep.c (struct aarch64_displaced_step_closure)
<cond>: Change type to bool.
(aarch64_displaced_step_b_cond): Update cond to use bool type.
(aarch64_displaced_step_cb): Likewise.
(aarch64_displaced_step_tb): Likewise.
While debugging the step-over-syscall problem, i wanted to see a bit more
debugging output to try to determine the root cause.
This patch does this.
gdb/ChangeLog:
2020-01-21 Luis Machado <luis.machado@linaro.org>
* aarch64-tdep.c (aarch64_displaced_step_fixup): Add more debugging
output.
In particular, this one:
FAIL: gdb.base/step-over-syscall.exp: fork: displaced=on: check_pc_after_cross_syscall: single step over fork final pc
When ptrace fork event reporting is enabled, GDB gets a PTRACE_EVENT_FORK
event whenever the inferior executes the fork syscall.
Then the logic is that GDB needs to step the inferior yet again in order to
receive a predetermined SIGTRAP, but no execution takes place because the
signal was already queued for delivery. That means the PC should stay the same.
I noticed the aarch64 code is currently adjusting the PC in this situation,
making the inferior skip an instruction without executing it.
The following change checks if we did not execute the instruction
(pc - to == 0), making proper adjustments for such case.
Regression tested on aarch64-linux-gnu on the tryserver.
gdb/ChangeLog:
2020-01-21 Luis Machado <luis.machado@linaro.org>
* aarch64-tdep.c (struct aarch64_displaced_step_closure )
<pc_adjust>: Adjust the documentation.
(aarch64_displaced_step_fixup): Check if PC really moved before
adjusting it.
Commit 20135676fc ("PR24960, Memory leak
from disassembler") added "disassemble_free_target" to opcodes. This
is used to free target-specific data when finished with a
disassembler.
This patch changes gdb to call this function where needed.
gdb/ChangeLog
2020-01-19 Tom Tromey <tom@tromey.com>
* disasm.c (~gdb_disassembler): New destructor.
(gdb_buffered_insn_length): Call disassemble_free_target.
* disasm.h (class gdb_disassembler): Declare destructor. Use
DISABLE_COPY_AND_ASSIGN.
Change-Id: I245ba5b7dec5e5d9f29cd21832c6e2b4fecef047
init_cutu_and_read_dies takes a callback function, which I've always
found somewhat difficult to follow. This patch replaces this function
with a class, and changes the callers to use it. In some cases this
allows for the removal of a helper struct and helper function as well.
gdb/ChangeLog
2020-01-19 Tom Tromey <tom@tromey.com>
* dwarf2read.c (abbrev_table_up): Move typedef earlier.
(die_reader_func_ftype): Remove.
(cutu_reader): New class.
(dw2_get_file_names_reader): Remove "data" parameter.
(dw2_get_file_names): Use cutu_reader.
(create_debug_type_hash_table): Update.
(read_cutu_die_from_dwo): Update comment.
(lookup_dwo_unit): Add dwo_name parameter.
(cutu_reader::init_tu_and_read_dwo_dies): Now a method. Remove
die_reader_func_ftype and data parameters.
(cutu_reader::cutu_reader): Rename from init_cutu_and_read_dies.
Remove die_reader_func_ftype and data parameters.
(~cutu_reader): New; from init_cutu_and_read_dies.
(cutu_reader::cutu_reader): Rename from
init_cutu_and_read_dies_no_follow. Remove die_reader_func_ftype
and data parameters.
(init_cutu_and_read_dies_simple): Remove.
(struct process_psymtab_comp_unit_data): Remove.
(process_psymtab_comp_unit_reader): Remove data parameter; add
want_partial_unit and pretend_language parameters.
(process_psymtab_comp_unit): Use cutu_reader.
(build_type_psymtabs_reader): Remove data parameter.
(build_type_psymtabs_1): Use cutu_reader.
(process_skeletonless_type_unit): Likewise.
(load_partial_comp_unit_reader): Remove.
(load_partial_comp_unit): Use cutu_reader.
(load_full_comp_unit_reader): Remove.
(load_full_comp_unit): Use cutu_reader.
(struct create_dwo_cu_data): Remove.
(create_dwo_cu_reader): Remove datap parameter; add dwo_file and
dwo_unit parameters.
(create_cus_hash_table): Use cutu_reader.
(struct dwarf2_read_addr_index_data): Remove.
(dwarf2_read_addr_index_reader): Remove.
(dwarf2_read_addr_index): Use cutu_reader.
(read_signatured_type_reader): Remove.
(read_signatured_type): Use cutu_reader.
Change-Id: I4ef2f29e73108ce94bfe97799f8f638ed272212d
In some cases, the TUI flickers when redrawing. This can be seen
mostly easily when switching layouts.
This patch fixes the problem by exploiting the double buffering that
curses already does. In some spots, the TUI will now disable flushing
the curses buffers to the screen; and then flush them all at once when
the rendering is complete.
gdb/ChangeLog
2020-01-19 Tom Tromey <tom@tromey.com>
* tui/tui.c (tui_show_assembly): Use tui_suppress_output.
* tui/tui-wingeneral.h (class tui_suppress_output): New.
(tui_wrefresh): Declare.
* tui/tui-wingeneral.c (suppress_output): New global.
(tui_suppress_output, ~tui_suppress_output): New constructor and
destructor.
(tui_wrefresh): New function.
(tui_gen_win_info::refresh_window): Use tui_wrefresh.
(tui_gen_win_info::make_window): Call wnoutrefresh when needed.
* tui/tui-regs.h (struct tui_data_window) <no_refresh>: Declare
method.
* tui/tui-regs.c (tui_data_window::erase_data_content): Call
tui_wrefresh.
(tui_data_window::no_refresh): New method.
(tui_data_item_window::refresh_window): Call tui_wrefresh.
(tui_reg_command): Use tui_suppress_output
* tui/tui-layout.c (tui_set_layout): Use tui_suppress_output.
* tui/tui-data.h (struct tui_gen_win_info) <no_refresh>: New
method.
* tui/tui-command.c (tui_refresh_cmd_win): Call tui_wrefresh.
Change-Id: Icb832ae100b861de3af3307488e636fa928d5c9f
I noticed that a plain "file" will leave the current source file in
the TUI source window. Instead, I think, it should clear the source
window. This patch implements this.
gdb/ChangeLog
2020-01-19 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.c (tui_update_source_windows_with_line):
Handle case where symtab is null.
gdb/testsuite/ChangeLog
2020-01-19 Tom Tromey <tom@tromey.com>
* gdb.tui/main.exp: Add check for plain "file".
Change-Id: I8424acf837f1a47f75bc6a833d1e917d4c10b51e
Unless I'm missing something, this function is a complicated way of
saying "fork_list.size () == 1".
gdb/ChangeLog:
* linux-fork.c (one_fork_p): Simplify.
Replace with range-based for loops.
gdb/ChangeLog:
* top.c (struct qt_args): Remove.
(kill_or_detach): Change return type to void, replace `void *`
parameter with a proper one.
(print_inferior_quit_action): Likewise.
(quit_confirm): Use range-based for loop to iterate over inferiors.
(quit_force): Likewise.
Replace with range-based loops.
gdb/ChangeLog:
* mi/mi-main.c (run_one_inferior): Change return type to void, replace
`void *` parameter with proper parameters.
(mi_cmd_exec_run): Use range-based loop to iterate over inferiors.
(print_one_inferior): Change return type to void, replace `void *`
parameter with proper parameters.
(mi_cmd_list_thread_groups): Use range-based loop to iterate over
inferiors.
(get_other_inferior): Remove.
(mi_cmd_remove_inferior): Use range-based loop to iterate over
inferiors.
Replace it with a range-based for. I've updated the comment in
mi_interp::init, which was a bit stale.
gdb/ChangeLog:
* mi/mi-interp.c (report_initial_inferior): Remove.
(mi_interp::init): Use range-based for to iterate over inferiors.
Use range-based for instead of iterate_over_inferiors in one spot in the Python
code.
gdb/ChangeLog:
* python/py-inferior.c (build_inferior_list): Remove.
(gdbpy_ref): Use range-based for loop to iterate over inferiors.
The type then looks like this:
(gdb) pt $_tlb->process_environment_block->process_parameters
type = struct rtl_user_process_parameters {
DWORD32 maximum_length;
DWORD32 length;
DWORD32 flags;
DWORD32 debug_flags;
void *console_handle;
DWORD32 console_flags;
void *standard_input;
void *standard_output;
void *standard_error;
unicode_string current_directory;
void *current_directory_handle;
unicode_string dll_path;
unicode_string image_path_name;
unicode_string command_line;
void *environment;
DWORD32 starting_x;
DWORD32 starting_y;
DWORD32 count_x;
DWORD32 count_y;
DWORD32 count_chars_x;
DWORD32 count_chars_y;
DWORD32 fill_attribute;
DWORD32 window_flags;
DWORD32 show_window_flags;
unicode_string window_title;
unicode_string desktop_info;
unicode_string shell_info;
unicode_string runtime_data;
} *
It's mainly useful to get the current directory, or the full command line:
(gdb) p $_tlb->process_environment_block->process_parameters->current_directory
$1 = {
length = 26,
maximum_length = 520,
buffer = 0xe36c8 L"C:\\src\\tests\\"
}
(gdb) p $_tlb->process_environment_block->process_parameters->command_line
$2 = {
length = 94,
maximum_length = 96,
buffer = 0xe32aa L"\"C:\\gdb\\build64\\gdb-git\\gdb\\gdb.exe\" access.exe"
}
The type names are all lowercase because the existing types created
by windows_get_tlb_type are also lowercase.
Type unicode_string is documented at [1].
The official documentation [2] for rtl_user_process_parameters is limited,
so I've used this other page [3].
[1] https://docs.microsoft.com/en-us/windows/win32/api/ntdef/ns-ntdef-_unicode_string
[2] https://docs.microsoft.com/en-us/windows/win32/api/winternl/ns-winternl-rtl_user_process_parameters
[3] https://www.nirsoft.net/kernel_struct/vista/RTL_USER_PROCESS_PARAMETERS.html
gdb/ChangeLog:
2020-01-16 Hannes Domani <ssbssa@yahoo.de>
* windows-tdep.c (windows_get_tlb_type):
Add rtl_user_process_parameters type.
Compiling GDB with '-fvisibility=hidden' removes the symbols that
should be exported.
This patch explicitly marks them as visible.
gdb/ChangeLog:
2020-01-16 Pedro Alves <palves@redhat.com>
Norbert Lange <nolange79@gmail.com>
PR build/24805
* gdbsupport/gdb_proc_service.h (PS_EXPORT): New.
(ps_get_thread_area, ps_getpid, ps_lcontinue, ps_lgetfpregs)
(ps_lgetregs, ps_lsetfpregs, ps_lsetregs, ps_lstop, ps_pcontinue)
(ps_pdread, ps_pdwrite, ps_pglobal_lookup, ps_pstop, ps_ptread)
(ps_ptwrite, ps_lgetxregs, ps_lgetxregsize, ps_lsetxregs)
(ps_plog): Redeclare exported functions with default visibility.
This patch handles DW_LLE_base_addressx, DW_LLE_startx_length and
DW_LLE_start_length.
Tested by running the testsuite before and after the patch and there is
no increase in the number of test cases that fails. Tested with both
-gdwarf-4 and -gdwarf-5 flags. Also tested -gslit-dwarf along with
-gdwarf-4 as well as -gdwarf5 flags.
This is an effort to support DWARF5 in gdb.
gdb/ChangeLog:
* dwarf2loc.c (decode_debug_loclists_addresses): Handle
DW_LLE_base_addressx, DW_LLE_startx_length, DW_LLE_start_length.
In post_create_inferior, we get the current thread using the
inferior_thread function and store it in `thr`. We then call
get_current_regcache immediately after, which does:
return get_thread_regcache (inferior_thread ());
This patch makes post_create_inferior use get_thread_regcache, passing
`thr`, saving an unnecessary inferior_thread call.
gdb/ChangeLog:
* infcmd.c (post_create_inferior): Use get_thread_regcache
instead of get_current_regcache.
PR symtab/12535 points out that gdb.decode_line("") will cause a
valgrind report.
I think the empty linespec does not really make sense. So, this patch
changes gdb.decode_line to treat a whitespace-only linespec the same
as a non-existing argument.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
PR symtab/12535:
* python/python.c (gdbpy_decode_line): Treat empty string the same
as no argument.
gdb/testsuite/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
PR symtab/12535:
* gdb.python/python.exp: Test decode_line with empty string
argument.
Change-Id: I1d95812b4b7a21d69a3e9afd05b9e3141a931897
I noticed that gdb includes libiberty twice in its link line. I don't
think there's a need for this, so this patch removes one of the
references.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* Makefile.in (CLIBS): Remove second use of $(LIBIBERTY).
Change-Id: I43bb7100660867081f937c67ea70ff751c62bbfb
This removes the use of <config.h> from the files in gdb/nat/.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/linux-btrace.c: Don't include <config.h>.
* nat/linux-ptrace.c: Don't include <config.h>.
* nat/x86-linux-dregs.c: Don't include <config.h>.
Change-Id: Ie8c734c54ada848aa020c77ec727704d367eff81
This moves many needed configure checks from gdb and gdbserver into
common.m4. This helps gdbsupport, nat, and target be self-contained.
The result is a bit spaghetti-ish, because gdbsupport uses another m4
file from gdb/. The resulting code is somewhat non-obvious. However,
these problems already exist, so it's not really that much worse than
what is already done.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Move many checks to ../gdbsupport/common.m4.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Remove any checks that were added to common.m4.
* acinclude.m4: Include lib-ld.m4, lib-prefix.m4, and
lib-link.m4.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure, Makefile.in, aclocal.m4, common.m4, config.in:
Rebuild.
* common.m4 (GDB_AC_COMMON): Move many checks from
gdb/configure.ac.
* acinclude.m4: Include bfd.m4, ptrace.m4.
Change-Id: I931eaa94065df268b30a2f1354390710df89c7f8
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
I noticed that USE_WIN32API is defined separately by gdbserver and
gdb. However, because it is used by code in gdbsupport, it should be
defined by common.m4. This approach ensures that the code will
continue to work when it is moved to the top level.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* gdbsupport/common.m4 (GDB_AC_COMMON): Define WIN32APILIBS and
USE_WIN32API when needed.
* configure.ac (USE_WIN32API): Don't define.
(WIN32LIBS): Use WIN32APILIBS.
* configure: Rebuild.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure.ac (LIBS): Use WIN32APILIBS.
(USE_WIN32API): Don't define.
* configure: Rebuild.
Change-Id: I40d524d5445ebfb452b36f4d0e102f0b1e1089df
Simon pointed out that the indentation in common.m4 is off. This
patch fixes the problem.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* gdbsupport/common.m4 (GDB_AC_COMMON): Fix indentation.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
Change-Id: I6a629bd5873cca95ba3e17656f0d0ce583a08361
Previously always the outermost function block was used, but
since skip is now able to skip over inline functions it is more
natural to skip the inline function that the program is currently
executing.
gdb:
2020-01-14 Bernd Edlinger <bernd.edlinger@hotmail.de>
* skip.c (skip_function_command): Make skip w/o arguments use the
name of the inlined function if pc is inside any inlined function.
gdb/testsuite:
2020-01-14 Bernd Edlinger <bernd.edlinger@hotmail.de>
* gdb.base/skip-inline.exp: Extend test.
While doing some investigation of mine, i noticed a few typos,
inaccuracies and missing information.
I went ahead and updated/improved those.
gdb/ChangeLog:
2020-01-14 Luis Machado <luis.machado@linaro.org>
* inf-ptrace.c (inf_ptrace_target::resume): Update comments.
* infrun.c (resume_1): Likewise.
(handle_inferior_event): Remove stale comment.
* linux-nat.c (linux_nat_target::resume): Update comments.
(save_stop_reason): Likewise.
(linux_nat_filter_event): Likewise.
* linux-nat.h (struct lwp_info) <stop_pc>, <stop_reason>: Likewise.
I ended up debugging a malformed ELF where a section containing
executable code was not correctly marked as allocatable. Before
realising the ELF was corrupted I tried to place a breakpoint on a
symbol in the non-allocatable, executable section, and GDB crashed.
Though trying to debug such an ELF clearly isn't going to go well I
would prefer, as far as possible, that any input, no matter how
corrupted, not crash GDB.
The crash occurs when trying to set a breakpoint on the name of a
function from the corrupted section. GDB converts the symbol to a
symtab_and_line, and looks up a suitable section for this.
The problem is that the section is actually an obj_section, which is
stored in the table within the objfile, and we only initialise this
table for allocatable sections (see add_to_objfile_sections_full in
objfiles.c). So, if the symbol is in a non-allocatable section then
we end up referencing an uninitialised obj_section.
Later we call get_sal_arch on the symtab_and_line, which calls
get_objfile_arch, which uses the objfile from the uninitialised
obj_section, which will be nullptr, at which point GDB crashes.
The fix I propose here is that when we setup the section references on
msymbols, we should check if the bfd_section being referenced is
allocatable or not. If it is not then we should set the section
reference back to the default 0 section (see how MSYMBOL_OBJ_SECTION
and SYMBOL_OBJ_SECTION treat the 0 section index).
With this fix in place GDB no longer crashes. Instead GDB creates the
breakpoint at the non-allocated address, and then fails, with an
error, when it tries to insert the breakpoint.
gdb/ChangeLog:
* elfread.c (record_minimal_symbol): Set section index to 0 for
non-allocatable sections.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-bad-elf-other.S: New file.
* gdb.dwarf2/dw2-bad-elf.c: New file.
* gdb.dwarf2/dw2-bad-elf.exp: New file.
Change-Id: Ie05436ab4c6a71440304d20ee639dfb021223f8b
* Process debug_str_offsets section. Handle DW_AT_str_offsets_base attribute and
keep the value in dwarf2_cu.
* Make addr_base field in dwarf2_cu optional to disambiguate 0 value
(absent or present and 0).
* During parsing, there is no guarantee that DW_AT_str_offsets_base and
DW_AT_rnglists_base fields will be processed before the attributes that need
those values for correct computation. So make two passes, on the first one mark
the attributes that depend on *_base attributes and process only the others.
On the second pass, only process the attributes that are marked on the first
pass.
* For string attributes, differentiate between addresses that directly point to
a string and those that point to an offset in debug_str_offsets section.
* There are now two attributes, DW_AT_addr_base and DW_AT_GNU_addr_base to read
address offset base. Likewise, there are two attributes, DW_AT_rnglists_base
and DW_AT_GNU_ranges_base to read ranges base. Since there is no guarantee which
ones the compiler will generate, create helper functions to handle all cases.
Tested with CC=/usr/bin/gcc (version 8.3.0) against master branch (also with
-gsplit-dwarf and -gdwarf-4 flags) and there was no increase in the set of
tests that fails. (gdb still cannot debug a 'hello world' program with DWARF 5,
so for the time being, this is all we care about).
This is part of an effort to support DWARF-5 in gdb.
Since the data held by the `contents` variable is arbitrary binary data,
it should have gdb_byte elements, not char elements. Also, using
gdb::byte_vector is preferable, since it doesn't unnecessarily
zero-initialize the values.
Instead of adding a cast in the call to m_core_vec->core_read_registers,
I have changed core_read_registers' argument to be a gdb_byte* instead
of a char*.
gdb/ChangeLog:
* gdbcore.h (struct core_fns) <core_read_registers>: Change
core_reg_sect type to gdb_byte *.
* arm-nbsd-nat.c (fetch_elfcore_registers): Likewise.
* cris-tdep.c (fetch_core_registers): Likewise.
* corelow.c (core_target::get_core_register_section): Change
type of `contents` to gdb::byte_vector.
In tui-wingeneral.c:box_win () a comment suggest we should display
titles like this:
+-WINDOW TITLE GOES HERE-+
However, we actually display them like this:
+--WINDOW TITLE GOES HERE+
The former seems nicer to me, so that's what this commit does. Short
titles will appear as:
+-SHORT TITLE------------+
We previously didn't test the horizontal windows borders in the test
suite, however, I've updated things so that we do now check for the
'+-' and '-+' on the upper border, this will give us some protection.
gdb/ChangeLog:
* tui/tui-wingeneral.c (box_win): Position the title in the center
of the border.
gdb/testsuite/ChangeLog:
* lib/tuiterm.exp (Term::_check_box): Check some parts of the top
border.
Change-Id: Iead6910e3b4e68bdf6871f861f23d2efd699faf0
As I was trying to compile gdb for an m68k host, I got this error:
CXX corelow.o
In file included from /binutils-gdb/gdb/gdbsupport/common-defs.h:120,
from /binutils-gdb/gdb/defs.h:28,
from /binutils-gdb/gdb/corelow.c:20:
/binutils-gdb/gdb/corelow.c: In member function 'void core_target::get_core_register_section(regcache*, const regset*, const char*, int, int, const char*, bool)':
/binutils-gdb/gdb/../include/libiberty.h:727:36: error: 'alloca' bound is unknown [-Werror=alloca-larger-than=]
727 | # define alloca(x) __builtin_alloca(x)
| ~~~~~~~~~~~~~~~~^~~
/binutils-gdb/gdb/corelow.c:625:23: note: in expansion of macro 'alloca'
625 | contents = (char *) alloca (size);
| ^~~~~~
We are using alloca to hold the contents of a the core register
sections. These sections are typically fairly small, but there is no
realy guarantee, so I think it would be more reasonable to just use
dynamic allocation here.
gdb/ChangeLog:
* corelow.c (core_target::get_core_register_section): Use
std::vector instead of alloca.
Now that most warnings of this kind are fixed, we can enable
-Wmissing-declarations. I say "most", because it is likely that there
are some more in some configurations I am not able to build, but they
should be pretty easy to fix.
gdb/ChangeLog:
* warning.m4: Add -Wmissing-declarations to build_warnings.
* configure: Re-generate.
gdb/gdbserver/ChangeLog:
* configure: Re-generate.
Change-Id: Iae9b59f22eb5dd1965d09f34c5c9e212cddf67ba
When I try to enable -Wmissing-declarations, I get this error:
CXX python/python.o
/home/smarchi/src/binutils-gdb/gdb/python/python.c: In function ‘PyObject* init__gdb_module()’:
/home/smarchi/src/binutils-gdb/gdb/python/python.c:1582:1: error: no previous declaration for ‘PyObject* init__gdb_module()’ [-Werror=missing-declarations]
init__gdb_module (void)
^~~~~~~~~~~~~~~~
Prevent it by providing a declaration just before the definition.
gdb/ChangeLog:
* python/python.c (init__gdb_module): Add declaration.
Change-Id: I394bc691b7db624708cc4cb2cda28a56ab85a82b
When compiling gdbserver for an architecture that uses the regdat.sh
script (such as m68k) and the -Wmissing-declarations compiler flag, I
get:
REGDAT reg-m68k-generated.c
CXX reg-m68k.o
reg-m68k-generated.c:30:1: error: no previous declaration for 'void init_registers_m68k()' [-Werror=missing-declarations]
30 | init_registers_m68k (void)
| ^~~~~~~~~~~~~~~~~~~
The same happens with other architectures, such as s390, but I'll be
using 68k as an example.
The init_registers_m68k function is defined in reg-m68k-generated.c,
which is produced by the regformats/regdat.sh script. This script reads
the regformats/reg-m68k.dat file, containing a register description, and
produces C code that creates a corresponding target description at
runtime.
The init_registers_m68k function is invoked at initialization time in
linux-m68k-low.c. The function must therefore be non-static, but does
not have a declaration at the moment.
The real clean way of fixing this would be to make regdat.sh generate a
.h file (in addition to the .c file) with declarations for whatever is
in the .c file. The generated .c file would include the .h file, and
therefore the definition would have a corresponding declaration. The
linux-m68k-low.c file would also include this .h file, instead of having
its own declaration of init_registers_m68k, like it does now.
However, this would be a quite big change for not much gain. As far as
I understand, some common architectures (i386, x86-64, ARM, AArch64)
have been moved to dynamically building target descriptions based on
features (the linux-*-tdesc.c files in gdbserver) and don't use
regdat.sh anymore. Logically (and given infinite development
resources), the other architectures would be migrated to this system too
and the regdat.sh script would be dropped. A new architecture would
probably not use regdat.sh either. So I therefore propose this simpler
patch instead, which just adds a local declaration in the generated
file.
gdb/ChangeLog:
* regformats/regdat.sh: Generate declaration for init function.
The remote-sim.c file doesn't build since the main multi-target patch
(5b6d1e4f, "Multi-target support"), this patch is an attempt to fix it.
I have only build-tested it, so I'm not sure it runs fine, but it should
get us close at least.
I made these functions methods of the gdbsim_target, because they need
to pass the target down to some GDB core functions, like
find_inferior_ptid:
- get_sim_inferior_data_by_ptid (renamed to get_inferior_data_by_ptid)
- gdbsim_resume_inferior (renamed to resume_one_inferior)
- gdbsim_close_inferior (renamed to close_one_inferior)
In the last two, I changed iterate_over_inferiors to a range-based for,
since that gives simpler code (no need to pass data through the void
pointer).
The next_pid variable, INITIAL_PID macro and sim_inferior_data structure
are simply moved up in the file, above gdbsim_target.
gdb/ChangeLog:
* remote-sim.c (next_pid, INITIAL_PID, sim_inferior_data): Move
up.
(gdbsim_target) <get_inferior_data_by_ptid, resume_one_inferior,
close_one_inferior>: New methods.
(get_sim_inferior_data_by_ptid): Move to gdbsim_target,
pass down target to find_inferior_pid.
(gdbsim_target::fetch_registers, gdbsim_target::store_registers):
Pass down target to find_inferior_ptid.
(gdbsim_target::create_inferior): Pass down target to
add_thread_silent.
(gdbsim_close_inferior): Move to gdbsim_close_inferior, pass
target down to find_inferior_ptid and switch_to_thread.
(gdbsim_target::close): Update to call close_one_inferior.
(struct resume_data): Remove.
(gdbsim_resume_inferior): Move to gdbsim_target. Take arguments
directly, rather than through a void pointer.
(gdbsim_target::resume): Update to call resume_one_inferior.
When building for mingw with -Wmissing-declarations, I get:
CXX gdbsupport/gdb_wait.o
/binutils-gdb/gdb/gdbsupport/gdb_wait.c:52:1: error: no previous declaration for 'int windows_status_to_termsig(long unsigned int)' [-Wer
ror=missing-declarations]
52 | windows_status_to_termsig (unsigned long status)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Make gdb_wait.c include gdb_wait.h to fix it.
gdb/ChangeLog:
* gdbsupport/gdb_wait.c: Include gdb_wait.h.
The multi-target patch should have removed all traces of
discard_all_inferiors, but somehow one use stayed behind along with
the definition of the function.
discard_all_inferiors is bad now because it blindly exits inferiors of
all target connections. It's best to remove it.
gdb/ChangeLog:
2020-01-12 Pedro Alves <palves@redhat.com>
* bsd-kvm.c (bsd_kvm_target::close): Call exit_inferior_silent
directly for the current inferior instead of
discard_all_inferiors.
(discard_all_inferiors): Delete.
When adding support for styling the TUI borders, I neglected to have
this code check cli_styling. As a result, "set style enabled off"
does not affect the borders.
This patch fixes this oversight. While doing this, I found that
running gdb without an executable, enabling the TUI, and then trying
"set style enabled off" would fail with the mysterious "No registers".
The fix for this is to use deprecated_safe_get_selected_frame in
tui_source_window_base::refill.
gdb/ChangeLog
2020-01-11 Tom Tromey <tom@tromey.com>
* tui/tui-wingeneral.c (box_win): Check cli_styling.
* tui/tui-winsource.c (tui_source_window_base::refill): Use
deprecated_safe_get_selected_frame.
Change-Id: I36acda25dd9014d994d366b4a0e8faee9d95d0f8
GDB uses the 'current_top_target' when displaying the description of
an inferior. This leads to same target being used for each inferior
and, in turn, yields incorrect output when the inferior has a target
that is supposed to give a specialized output. For instance, the
remote target outputs "Remote target" instead of "process XYZ" as the
description if the multi-process feature is not supported or turned
off.
E.g.: Suppose we have a native and a remote target, and the native is
the current inferior. The remote target does not support multi-process.
For "info inferiors", we would expect to see:
~~~
(gdb) i inferiors
Num Description Connection Executable
* 1 process 29060 1 (native) /a/path
2 Remote target 2 (remote ...)
~~~
but instead we get
~~~
(gdb) i inferiors
Num Description Connection Executable
* 1 process 29060 1 (native) /a/path
2 process 42000 2 (remote ...)
~~~
Similarly, if the current inferior is the remote one, we would expect
to see
~~~
(gdb) i inferiors
Num Description Connection Executable
1 process 29060 1 (native) /a/path
* 2 Remote target 2 (remote ...)
~~~
but we get
~~~
(gdb) i inferiors
Num Description Connection Executable
* 1 Remote target 1 (native) /a/path
2 Remote target 2 (remote ...)
~~~
With this patch, we switch to the inferior when outputting its
description, so that the current_top_target will be aligned to the
inferior we are displaying.
For testing, this patch expands the "info inferiors" test for the
multi-target feature. The test was checking for the output of the
info commands after setup, only when the current inferior is the last
added inferior.
This patch does the following to the testcase:
1. The "info inferiors" and "info connections" test is extracted out
from the "setup" procedure to a separate procedure.
2. The test is enriched to check the output after switching to each
inferior, not just the last one.
3. The test is performed twice; one for when the multi-process feature
is turned on, one for off.
gdb/ChangeLog:
2020-01-10 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* inferior.c (print_inferior): Switch inferior before printing it.
gdb/testsuite/ChangeLog:
2020-01-10 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.multi/multi-target.exp (setup): Factor out "info
connections" and "info inferiors" tests to ...
(test_info_inferiors): ... this new procedure.
(top level): Run new "info-inferiors" tests.
With multi-target, each inferior now has its own target connection.
The problem in switch_to_program_space_and_thread is that in the
current state GDB switches to "no thread" and also sets the program
space but because the inferior is not switched, potentially an
incorrect target remains selected.
Here is a sample scenario that exploits this flow:
On terminal 1, start a gdbserver on a program named foo:
$ gdbserver :1234 ./foo
On terminal 2, start gdb on a program named bar. Suppose foo and bar
are compiled from foo.c and bar.c. They are completely separate. So,
bar.c:2 has no meaning for foo.
$ gdb -q ./bar
Reading symbols from ./bar...
(gdb) add-inferior
[New inferior 2]
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) target remote :1234
...
(gdb) set debug remote 2
(gdb) break bar.c:2
Sending packet: $Hgp0.0#ad...Packet received: OK
Sending packet: $m5fa,12#f8...Packet received: E01
Sending packet: $m5fa,1#c6...Packet received: E01
Sending packet: $m5fb,3#c9...Packet received: E01
Sending packet: $m5fe,1#ca...Packet received: E01
Breakpoint 1 at 0x5fe: file bar.c, line 2.
(gdb)
Here we have an unnecessary sending of the packets to the gdbserver.
With this fix in progspace-and-thread.c, we'll get this:
(gdb) break bar.c:2
Breakpoint 1 at 0x5fe: file bar.c, line 2.
(gdb)
Now there is no sending of the packets to gdbserver.
The changes around clear_symtab_users calls are necessary because
otherwise we regress gdb.base/step-over-exit.exp, hitting the new
assertion in switch_to_program_space_and_thread. The problem is, a
forked child terminates, and when GDB decides to auto-purge that
inferior, GDB tries to switch to the pspace of that no-longer-existing
inferior.
The root of the problem is within the program_space destructor:
program_space::~program_space ()
{
...
set_current_program_space (this); # (1)
...
breakpoint_program_space_exit (this); # (2)
...
free_all_objfiles (); # (3)
...
}
We get here from delete_inferior -> delete_program_space.
So we're deleting an inferior, and the inferior to be
deleted is no longer in the inferior list.
At (2), we've deleted all the breakpoints and locations for the
program space being deleted.
The crash happens while doing a breakpoint re-set, called by
clear_symtab_users at the tail end of (3). That is, while recreating
breakpoints for the current program space, which is the program space
we're tearing down. During breakpoint re-set, we try to switch to the
new location's pspace (the current pspace set in (1), so the pspace
we're tearing down) with switch_to_program_space_and_thread, and that
hits the failed assertion. It's the fact that we recreate breakpoints
in the program_space destructor that is the latent bug here. Just
don't do that, and we don't end up in the crash situation.
My first approach to fix this added a symfile_add_flags parameter to
program_space::free_all_objfiles, and then passed that down to
clear_symtab_users. The program_space dtor would then pass down
SYMFILE_DEFER_BP_RESET to free_all_objfiles. I couldn't help feeling
that adding that parameter to free_all_objfiles looked a little
awkward, so I settled on something a little different -- hoist the
clear_symtab_users call to the callers. There are only two callers.
I felt that that didn't look as odd, particularly since
remove_symbol_file_command also does:
objf->unlink ();
clear_symtab_users (0);
I.e., objfile deletion is already separate from calling
clear_symtab_users in some places.
gdb/ChangeLog:
2020-01-10 Aleksandar Paunovic <aleksandar.paunovic@intel.com>
Pedro Alves <palves@redhat.com>
* progspace-and-thread.c (switch_to_program_space_and_thread):
Assert there's an inferior for PSPACE. Use
switch_to_inferior_no_thread to switch the inferior too.
* progspace.c (program_space::~program_space): Call
clear_symtab_users here, with SYMFILE_DEFER_BP_RESET.
(program_space::free_all_objfiles): Don't call clear_symtab_users
here.
* symfile.c (symbol_file_clear): Call clear_symtab_users here.
gdb/testsuite/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdb.server/bkpt-other-inferior.exp: New file.
This commit documents the new multi-target features in both NEWS and
user manual.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* NEWS: Mention multi-target debugging, "info connections", and
"add-inferior -no-connection".
gdb/doc/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Starting): Say "current inferior not connected"
instead of "GDB not connected".
(Inferiors and Programs): Rename node to ...
(Inferiors Connections and Programs): ... this. Update all
references. Talk about multiple target connections. Update "info
inferiors" info to mention the connections column. Describe "info
connections". Document "add-inferior -no-connection".
* guile.texi, python.texi: Update cross references.
Currently, we can only support resuming multiple targets at the same
time if all targets are in non-stop mode (or user-visible all-stop
mode with target backend in non-stop mode).
This patch makes GDB error out if the user tries to resume more than
one target at the same time and one of the resumed targets isn't in
non-stop mode:
(gdb) info inferiors
Num Description Connection Executable
1 process 15303 1 (native) a.out
* 2 process 15286 2 (extended-remote :9999) a.out
(gdb) set schedule-multiple on
(gdb) c
Continuing.
Connection 2 (extended-remote :9999) does not support multi-target resumption.
This is here later in the series instead of in the main multi-target
patch because it depends the previous patch, which added
process_stratum_target::connection_string().
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* infrun.c: Include "target-connection.h".
(check_multi_target_resumption): New.
(proceed): Call it.
* target-connection.c (make_target_connection_string): Make
extern.
* target-connection.h (make_target_connection_string): Declare.
This commit extends the CLI a bit for multi-target, in three ways.
#1 - New "info connections" command.
This is a new command that lists the open connections (process_stratum
targets). For example, if you're debugging two remote connections, a
couple local/native processes, and a core dump, all at the same time,
you might see something like this:
(gdb) info connections
Num What Description
1 remote 192.168.0.1:9999 Remote serial target in gdb-specific protocol
2 remote 192.168.0.2:9998 Remote serial target in gdb-specific protocol
* 3 native Native process
4 core Local core dump file
#2 - New "info inferiors" "Connection" column
You'll also see a new matching "Connection" column in "info
inferiors", showing you which connection an inferior is bound to:
(gdb) info inferiors
Num Description Connection Executable
1 process 18526 1 (remote 192.168.0.1:9999) target:/tmp/a.out
2 process 18531 2 (remote 192.168.0.2:9998) target:/tmp/a.out
3 process 19115 3 (native) /tmp/prog1
4 process 6286 4 (core) myprogram
* 5 process 19122 3 (native) /bin/hello
#3 - Makes "add-inferior" show the inferior's target connection
"add-inferior" now shows you the connection you've just bound the
inferior to, which is the current process_stratum target:
(gdb) add-inferior
[New inferior 2]
Added inferior 2 on connection 1 (extended-remote localhost:2346)
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add target-connection.c.
* inferior.c (uiout_field_connection): New function.
(print_inferior): Add new "connection-id" column.
(add_inferior_command): Show connection number/string of added
inferior.
* process-stratum-target.h
(process_stratum_target::connection_string): New virtual method.
(process_stratum_target::connection_number): New field.
* remote.c (remote_target::connection_string): New override.
* target-connection.c: New file.
* target-connection.h: New file.
* target.c (decref_target): Remove process_stratum targets from
the connection list.
(target_stack::push): Add process_stratum targets to the
connection list.
gdb/testsuite/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdb.base/kill-detach-inferiors-cmd.exp: Adjust expected output
of "add-inferior".
* gdb.base/quit-live.exp: Likewise.
* gdb.base/remote-exec-file.exp: Likewise.
* gdb.guile/scm-progspace.exp: Likewise.
* gdb.linespec/linespec.exp: Likewise.
* gdb.mi/new-ui-mi-sync.exp: Likewise.
* gdb.mi/user-selected-context-sync.exp: Likewise.
* gdb.multi/multi-target.exp (setup): Add "info connection" and
"info inferiors" tests.
* gdb.multi/remove-inferiors.exp: Adjust expected output of
"add-inferior".
* gdb.multi/watchpoint-multi.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.server/extended-remote-restart.exp: Likewise.
* gdb.threads/fork-plus-threads.exp: Adjust expected output of
"info inferiors".
* gdb.threads/forking-threads-plus-breakpoint.exp: Likewise.
* gdb.trace/report.exp: Likewise.
This commit reverts:
commit 5f5219fc34
Author: Pedro Alves <palves@redhat.com>
AuthorDate: Tue Apr 12 16:49:30 2016 +0100
Remove unused struct serial::name field
The following patches will add uses for the field.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
Revert:
2016-04-12 Pedro Alves <palves@redhat.com>
* serial.c (serial_open, serial_fdopen_ops, do_serial_close):
Remove references to name.
* serial.h (struct serial) <name>: Delete.
Since each inferior has its own target stack, the stratum condition
for the "error out if debugging something" check is always false.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdbarch-selftests.c (register_to_value_test): Remove "target
already pushed" check.
This commit adds multi-target support to GDB. What this means is that
with this commit, GDB can now be connected to different targets at the
same time. E.g., you can debug a live native process and a core dump
at the same time, connect to multiple gdbservers, etc.
Actually, the word "target" is overloaded in gdb. We already have a
target stack, with pushes several target_ops instances on top of one
another. We also have "info target" already, which means something
completely different to what this patch does.
So from here on, I'll be using the "target connections" term, to mean
an open process_stratum target, pushed on a target stack. This patch
makes gdb have multiple target stacks, and multiple process_stratum
targets open simultaneously. The user-visible changes / commands will
also use this terminology, but of course it's all open to debate.
User-interface-wise, not that much changes. The main difference is
that each inferior may have its own target connection.
A target connection (e.g., a target extended-remote connection) may
support debugging multiple processes, just as before.
Say you're debugging against gdbserver in extended-remote mode, and
you do "add-inferior" to prepare to spawn a new process, like:
(gdb) target extended-remote :9999
...
(gdb) start
...
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) file a.out
...
(gdb) start
...
At this point, you have two inferiors connected to the same gdbserver.
With this commit, GDB will maintain a target stack per inferior,
instead of a global target stack.
To preserve the behavior above, by default, "add-inferior" makes the
new inferior inherit a copy of the target stack of the current
inferior. Same across a fork - the child inherits a copy of the
target stack of the parent. While the target stacks are copied, the
targets themselves are not. Instead, target_ops is made a
refcounted_object, which means that target_ops instances are
refcounted, which each inferior counting for a reference.
What if you want to create an inferior and connect it to some _other_
target? For that, this commit introduces a new "add-inferior
-no-connection" option that makes the new inferior not share the
current inferior's target. So you could do:
(gdb) target extended-remote :9999
Remote debugging using :9999
...
(gdb) add-inferior -no-connection
[New inferior 2]
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 <null>
(gdb) tar extended-remote :10000
Remote debugging using :10000
...
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 process 18450 target:/home/pedro/tmp/main
(gdb)
A following patch will extended "info inferiors" to include a column
indicating which connection an inferior is bound to, along with a
couple other UI tweaks.
Other than that, debugging is the same as before. Users interact with
inferiors and threads as before. The only difference is that
inferiors may be bound to processes running in different machines.
That's pretty much all there is to it in terms of noticeable UI
changes.
On to implementation.
Since we can be connected to different systems at the same time, a
ptid_t is no longer a unique identifier. Instead a thread can be
identified by a pair of ptid_t and 'process_stratum_target *', the
later being the instance of the process_stratum target that owns the
process/thread. Note that process_stratum_target inherits from
target_ops, and all process_stratum targets inherit from
process_stratum_target. In earlier patches, many places in gdb were
converted to refer to threads by thread_info pointer instead of
ptid_t, but there are still places in gdb where we start with a
pid/tid and need to find the corresponding inferior or thread_info
objects. So you'll see in the patch many places adding a
process_stratum_target parameter to functions that used to take only a
ptid_t.
Since each inferior has its own target stack now, we can always find
the process_stratum target for an inferior. That is done via a
inf->process_target() convenience method.
Since each inferior has its own target stack, we need to handle the
"beneath" calls when servicing target calls. The solution I settled
with is just to make sure to switch the current inferior to the
inferior you want before making a target call. Not relying on global
context is just not feasible in current GDB. Fortunately, there
aren't that many places that need to do that, because generally most
code that calls target methods already has the current context
pointing to the right inferior/thread. Note, to emphasize -- there's
no method to "switch to this target stack". Instead, you switch the
current inferior, and that implicitly switches the target stack.
In some spots, we need to iterate over all inferiors so that we reach
all target stacks.
Native targets are still singletons. There's always only a single
instance of such targets.
Remote targets however, we'll have one instance per remote connection.
The exec target is still a singleton. There's only one instance. I
did not see the point of instanciating more than one exec_target
object.
After vfork, we need to make sure to push the exec target on the new
inferior. See exec_on_vfork.
For type safety, functions that need a {target, ptid} pair to identify
a thread, take a process_stratum_target pointer for target parameter
instead of target_ops *. Some shared code in gdb/nat/ also need to
gain a target pointer parameter. This poses an issue, since gdbserver
doesn't have process_stratum_target, only target_ops. To fix this,
this commit renames gdbserver's target_ops to process_stratum_target.
I think this makes sense. There's no concept of target stack in
gdbserver, and gdbserver's target_ops really implements a
process_stratum-like target.
The thread and inferior iterator functions also gain
process_stratum_target parameters. These are used to be able to
iterate over threads and inferiors of a given target. Following usual
conventions, if the target pointer is null, then we iterate over
threads and inferiors of all targets.
I tried converting "add-inferior" to the gdb::option framework, as a
preparatory patch, but that stumbled on the fact that gdb::option does
not support file options yet, for "add-inferior -exec". I have a WIP
patchset that adds that, but it's not a trivial patch, mainly due to
need to integrate readline's filename completion, so I deferred that
to some other time.
In infrun.c/infcmd.c, the main change is that we need to poll events
out of all targets. See do_target_wait. Right after collecting an
event, we switch the current inferior to an inferior bound to the
target that reported the event, so that target methods can be used
while handling the event. This makes most of the code transparent to
multi-targets. See fetch_inferior_event.
infrun.c:stop_all_threads is interesting -- in this function we need
to stop all threads of all targets. What the function does is send an
asynchronous stop request to all threads, and then synchronously waits
for events, with target_wait, rinse repeat, until all it finds are
stopped threads. Now that we have multiple targets, it's not
efficient to synchronously block in target_wait waiting for events out
of one target. Instead, we implement a mini event loop, with
interruptible_select, select'ing on one file descriptor per target.
For this to work, we need to be able to ask the target for a waitable
file descriptor. Such file descriptors already exist, they are the
descriptors registered in the main event loop with add_file_handler,
inside the target_async implementations. This commit adds a new
target_async_wait_fd target method that just returns the file
descriptor in question. See wait_one / stop_all_threads in infrun.c.
The 'threads_executing' global is made a per-target variable. Since
it is only relevant to process_stratum_target targets, this is where
it is put, instead of in target_ops.
You'll notice that remote.c includes some FIXME notes. These refer to
the fact that the global arrays that hold data for the remote packets
supported are still globals. For example, if we connect to two
different servers/stubs, then each might support different remote
protocol features. They might even be different architectures, like
e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a
host/controller scenario as a single program. That isn't going to
work correctly today, because of said globals. I'm leaving fixing
that for another pass, since it does not appear to be trivial, and I'd
rather land the base work first. It's already useful to be able to
debug multiple instances of the same server (e.g., a distributed
cluster, where you have full control over the servers installed), so I
think as is it's already reasonable incremental progress.
Current limitations:
- You can only resume more that one target at the same time if all
targets support asynchronous debugging, and support non-stop mode.
It should be possible to support mixed all-stop + non-stop
backends, but that is left for another time. This means that
currently in order to do multi-target with gdbserver you need to
issue "maint set target-non-stop on". I would like to make that
mode be the default, but we're not there yet. Note that I'm
talking about how the target backend works, only. User-visible
all-stop mode works just fine.
- As explained above, connecting to different remote servers at the
same time is likely to produce bad results if they don't support the
exact set of RSP features.
FreeBSD updates courtesy of John Baldwin.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@FreeBSD.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::thread_architecture): Adjust.
* ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call.
(task_command_1): Likewise.
* aix-thread.c (sync_threadlists, aix_thread_target::resume)
(aix_thread_target::wait, aix_thread_target::fetch_registers)
(aix_thread_target::store_registers)
(aix_thread_target::thread_alive): Adjust.
* amd64-fbsd-tdep.c: Include "inferior.h".
(amd64fbsd_get_thread_local_address): Pass down target.
* amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle
thread's gdbarch instead of target_gdbarch.
* break-catch-sig.c (signal_catchpoint_print_it): Adjust call to
get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* breakpoint.c (breakpoints_should_be_inserted_now): Consider all
inferiors.
(update_inserted_breakpoint_locations): Skip if inferiors with no
execution.
(update_global_location_list): When handling moribund locations,
find representative inferior for location's pspace, and use thread
count of its process_stratum target.
* bsd-kvm.c (bsd_kvm_target_open): Pass target down.
* bsd-uthread.c (bsd_uthread_target::wait): Use
as_process_stratum_target and adjust thread_change_ptid and
add_thread calls.
(bsd_uthread_target::update_thread_list): Use
as_process_stratum_target and adjust find_thread_ptid,
thread_change_ptid and add_thread calls.
* btrace.c (maint_btrace_packet_history_cmd): Adjust
find_thread_ptid call.
* corelow.c (add_to_thread_list): Adjust add_thread call.
(core_target_open): Adjust add_thread_silent and thread_count
calls.
(core_target::pid_to_str): Adjust find_inferior_ptid call.
* ctf.c (ctf_target_open): Adjust add_thread_silent call.
* event-top.c (async_disconnect): Pop targets from all inferiors.
* exec.c (add_target_sections): Push exec target on all inferiors
sharing the program space.
(remove_target_sections): Remove the exec target from all
inferiors sharing the program space.
(exec_on_vfork): New.
* exec.h (exec_on_vfork): Declare.
* fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter.
Pass it down.
(fbsd_nat_target::update_thread_list): Adjust.
(fbsd_nat_target::resume): Adjust.
(fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it
down.
(fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust.
* fbsd-tdep.c (fbsd_corefile_thread): Adjust
get_thread_arch_regcache call.
* fork-child.c (gdb_startup_inferior): Pass target down to
startup_inferior and set_executing.
* gdbthread.h (struct process_stratum_target): Forward declare.
(add_thread, add_thread_silent, add_thread_with_info)
(in_thread_list): Add process_stratum_target parameter.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(find_thread_ptid, thread_change_ptid): Add process_stratum_target
parameter.
(all_threads()): Delete overload.
(all_threads, all_non_exited_threads): Add process_stratum_target
parameter.
(all_threads_safe): Use brace initialization.
(thread_count): Add process_stratum_target parameter.
(set_resumed, set_running, set_stop_requested, set_executing)
(threads_are_executing, finish_thread_state): Add
process_stratum_target parameter.
(switch_to_thread): Use is_current_thread.
* i386-fbsd-tdep.c: Include "inferior.h".
(i386fbsd_get_thread_local_address): Pass down target.
* i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust.
* inf-child.c (inf_child_target::maybe_unpush_target): Remove
have_inferiors check.
* inf-ptrace.c (inf_ptrace_target::create_inferior)
(inf_ptrace_target::attach): Adjust.
* infcall.c (run_inferior_call): Adjust.
* infcmd.c (run_command_1): Pass target to
scoped_finish_thread_state.
(proceed_thread_callback): Skip inferiors with no execution.
(continue_command): Rename 'all_threads' local to avoid hiding
'all_threads' function. Adjust get_last_target_status call.
(prepare_one_step): Adjust set_running call.
(signal_command): Use user_visible_resume_target. Compare thread
pointers instead of inferior_ptid.
(info_program_command): Adjust to pass down target.
(attach_command): Mark target's 'thread_executing' flag.
(stop_current_target_threads_ns): New, factored out from ...
(interrupt_target_1): ... this. Switch inferior before making
target calls.
* inferior-iter.h
(struct all_inferiors_iterator, struct all_inferiors_range)
(struct all_inferiors_safe_range)
(struct all_non_exited_inferiors_range): Filter on
process_stratum_target too. Remove explicit.
* inferior.c (inferior::inferior): Push dummy target on target
stack.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors):
Add process_stratum_target parameter, and pass it down.
(have_live_inferiors): Adjust.
(switch_to_inferior_and_push_target): New.
(add_inferior_command, clone_inferior_command): Handle
"-no-connection" parameter. Use
switch_to_inferior_and_push_target.
(_initialize_inferior): Mention "-no-connection" option in
the help of "add-inferior" and "clone-inferior" commands.
* inferior.h: Include "process-stratum-target.h".
(interrupt_target_1): Use bool.
(struct inferior) <push_target, unpush_target, target_is_pushed,
find_target_beneath, top_target, process_target, target_at,
m_stack>: New.
(discard_all_inferiors): Delete.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors)
(all_inferiors, all_non_exited_inferiors): Add
process_stratum_target parameter.
* infrun.c: Include "gdb_select.h" and <unordered_map>.
(target_last_proc_target): New global.
(follow_fork_inferior): Push target on new inferior. Pass target
to add_thread_silent. Call exec_on_vfork. Handle target's
reference count.
(follow_fork): Adjust get_last_target_status call. Also consider
target.
(follow_exec): Push target on new inferior.
(struct execution_control_state) <target>: New field.
(user_visible_resume_target): New.
(do_target_resume): Call target_async.
(resume_1): Set target's threads_executing flag. Consider resume
target.
(commit_resume_all_targets): New.
(proceed): Also consider resume target. Skip threads of inferiors
with no execution. Commit resumtion in all targets.
(start_remote): Pass current inferior to wait_for_inferior.
(infrun_thread_stop_requested): Consider target as well. Pass
thread_info pointer to clear_inline_frame_state instead of ptid.
(infrun_thread_thread_exit): Consider target as well.
(random_pending_event_thread): New inferior parameter. Use it.
(do_target_wait): Rename to ...
(do_target_wait_1): ... this. Add inferior parameter, and pass it
down.
(threads_are_resumed_pending_p, do_target_wait): New.
(prepare_for_detach): Adjust calls.
(wait_for_inferior): New inferior parameter. Handle it. Use
do_target_wait_1 instead of do_target_wait.
(fetch_inferior_event): Adjust. Switch to representative
inferior. Pass target down.
(set_last_target_status): Add process_stratum_target parameter.
Save target in global.
(get_last_target_status): Add process_stratum_target parameter and
handle it.
(nullify_last_target_wait_ptid): Clear 'target_last_proc_target'.
(context_switch): Check inferior_ptid == null_ptid before calling
inferior_thread().
(get_inferior_stop_soon): Pass down target.
(wait_one): Rename to ...
(poll_one_curr_target): ... this.
(struct wait_one_event): New.
(wait_one): New.
(stop_all_threads): Adjust.
(handle_no_resumed, handle_inferior_event): Adjust to consider the
event's target.
(switch_back_to_stepped_thread): Also consider target.
(print_stop_event): Update.
(normal_stop): Update. Also consider the resume target.
* infrun.h (wait_for_inferior): Remove declaration.
(user_visible_resume_target): New declaration.
(get_last_target_status, set_last_target_status): New
process_stratum_target parameter.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter, and use it.
(clear_inline_frame_state (thread_info*)): New.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter.
(clear_inline_frame_state (thread_info*)): Declare.
* linux-fork.c (delete_checkpoint_command): Pass target down to
find_thread_ptid.
(checkpoint_command): Adjust.
* linux-nat.c (linux_nat_target::follow_fork): Switch to thread
instead of just tweaking inferior_ptid.
(linux_nat_switch_fork): Pass target down to thread_change_ptid.
(exit_lwp): Pass target down to find_thread_ptid.
(attach_proc_task_lwp_callback): Pass target down to
add_thread/set_running/set_executing.
(linux_nat_target::attach): Pass target down to
thread_change_ptid.
(get_detach_signal): Pass target down to find_thread_ptid.
Consider last target status's target.
(linux_resume_one_lwp_throw, resume_lwp)
(linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp)
(stop_wait_callback, save_stop_reason, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down.
(linux_nat_target::async_wait_fd): New.
(linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass
target down.
* linux-nat.h (linux_nat_target::async_wait_fd): Declare.
* linux-tdep.c (get_thread_arch_regcache): Pass target down.
* linux-thread-db.c (struct thread_db_info::process_target): New
field.
(add_thread_db_info): Save target.
(get_thread_db_info): New process_stratum_target parameter. Also
match target.
(delete_thread_db_info): New process_stratum_target parameter.
Also match target.
(thread_from_lwp): Adjust to pass down target.
(thread_db_notice_clone): Pass down target.
(check_thread_db_callback): Pass down target.
(try_thread_db_load_1): Always push the thread_db target.
(try_thread_db_load, record_thread): Pass target down.
(thread_db_target::detach): Pass target down. Always unpush the
thread_db target.
(thread_db_target::wait, thread_db_target::mourn_inferior): Pass
target down. Always unpush the thread_db target.
(find_new_threads_callback, thread_db_find_new_threads_2)
(thread_db_target::update_thread_list): Pass target down.
(thread_db_target::pid_to_str): Pass current inferior down.
(thread_db_target::get_thread_local_address): Pass target down.
(thread_db_target::resume, maintenance_check_libthread_db): Pass
target down.
* nto-procfs.c (nto_procfs_target::update_thread_list): Adjust.
* procfs.c (procfs_target::procfs_init_inferior): Declare.
(proc_set_current_signal, do_attach, procfs_target::wait): Adjust.
(procfs_init_inferior): Rename to ...
(procfs_target::procfs_init_inferior): ... this and adjust.
(procfs_target::create_inferior, procfs_notice_thread)
(procfs_do_thread_registers): Adjust.
* ppc-fbsd-tdep.c: Include "inferior.h".
(ppcfbsd_get_thread_local_address): Pass down target.
* proc-service.c (ps_xfer_memory): Switch current inferior and
program space as well.
(get_ps_regcache): Pass target down.
* process-stratum-target.c
(process_stratum_target::thread_address_space)
(process_stratum_target::thread_architecture): Pass target down.
* process-stratum-target.h
(process_stratum_target::threads_executing): New field.
(as_process_stratum_target): New.
* ravenscar-thread.c
(ravenscar_thread_target::update_inferior_ptid): Pass target down.
(ravenscar_thread_target::wait, ravenscar_add_thread): Pass target
down.
* record-btrace.c (record_btrace_target::info_record): Adjust.
(record_btrace_target::record_method)
(record_btrace_target::record_is_replaying)
(record_btrace_target::fetch_registers)
(get_thread_current_frame_id, record_btrace_target::resume)
(record_btrace_target::wait, record_btrace_target::stop): Pass
target down.
* record-full.c (record_full_wait_1): Switch to event thread.
Pass target down.
* regcache.c (regcache::regcache)
(get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add
process_stratum_target parameter and handle it.
(current_thread_target): New global.
(get_thread_regcache): Add process_stratum_target parameter and
handle it. Switch inferior before calling target method.
(get_thread_regcache): Pass target down.
(get_thread_regcache_for_ptid): Pass target down.
(registers_changed_ptid): Add process_stratum_target parameter and
handle it.
(registers_changed_thread, registers_changed): Pass target down.
(test_get_thread_arch_aspace_regcache): New.
(current_regcache_test): Define a couple local test_target_ops
instances and use them for testing.
(readwrite_regcache): Pass process_stratum_target parameter.
(cooked_read_test, cooked_write_test): Pass mock_target down.
* regcache.h (get_thread_regcache, get_thread_arch_regcache)
(get_thread_arch_aspace_regcache): Add process_stratum_target
parameter.
(regcache::target): New method.
(regcache::regcache, regcache::get_thread_arch_aspace_regcache)
(regcache::registers_changed_ptid): Add process_stratum_target
parameter.
(regcache::m_target): New field.
(registers_changed_ptid): Add process_stratum_target parameter.
* remote.c (remote_state::supports_vCont_probed): New field.
(remote_target::async_wait_fd): New method.
(remote_unpush_and_throw): Add remote_target parameter.
(get_current_remote_target): Adjust.
(remote_target::remote_add_inferior): Push target.
(remote_target::remote_add_thread)
(remote_target::remote_notice_new_inferior)
(get_remote_thread_info): Pass target down.
(remote_target::update_thread_list): Skip threads of inferiors
bound to other targets. (remote_target::close): Don't discard
inferiors. (remote_target::add_current_inferior_and_thread)
(remote_target::process_initial_stop_replies)
(remote_target::start_remote)
(remote_target::remote_serial_quit_handler): Pass down target.
(remote_target::remote_unpush_target): New remote_target
parameter. Unpush the target from all inferiors.
(remote_target::remote_unpush_and_throw): New remote_target
parameter. Pass it down.
(remote_target::open_1): Check whether the current inferior has
execution instead of checking whether any inferior is live. Pass
target down.
(remote_target::remote_detach_1): Pass down target. Use
remote_unpush_target.
(extended_remote_target::attach): Pass down target.
(remote_target::remote_vcont_probe): Set supports_vCont_probed.
(remote_target::append_resumption): Pass down target.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc, remote_target::resume)
(remote_target::commit_resume): Pass down target.
(remote_target::remote_stop_ns): Check supports_vCont_probed.
(remote_target::interrupt_query)
(remote_target::remove_new_fork_children)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::remote_parse_stop_reply)
(remote_target::process_stop_reply): Pass down target.
(first_remote_resumed_thread): New remote_target parameter. Pass
it down.
(remote_target::wait_as): Pass down target.
(unpush_and_perror): New remote_target parameter. Pass it down.
(remote_target::readchar, remote_target::remote_serial_write)
(remote_target::getpkt_or_notif_sane_1)
(remote_target::kill_new_fork_children, remote_target::kill): Pass
down target.
(remote_target::mourn_inferior): Pass down target. Use
remote_unpush_target.
(remote_target::core_of_thread)
(remote_target::remote_btrace_maybe_reopen): Pass down target.
(remote_target::pid_to_exec_file)
(remote_target::thread_handle_to_thread_info): Pass down target.
(remote_target::async_wait_fd): New.
* riscv-fbsd-tdep.c: Include "inferior.h".
(riscv_fbsd_get_thread_local_address): Pass down target.
* sol2-tdep.c (sol2_core_pid_to_str): Pass down target.
* sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs)
(ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback):
Adjust.
* solib-spu.c (spu_skip_standalone_loader): Pass down target.
* solib-svr4.c (enable_break): Pass down target.
* spu-multiarch.c (parse_spufs_run): Pass down target.
* spu-tdep.c (spu2ppu_sniffer): Pass down target.
* target-delegates.c: Regenerate.
* target.c (g_target_stack): Delete.
(current_top_target): Return the current inferior's top target.
(target_has_execution_1): Refer to the passed-in inferior's top
target.
(target_supports_terminal_ours): Check whether the initial
inferior was already created.
(decref_target): New.
(target_stack::push): Incref/decref the target.
(push_target, push_target, unpush_target): Adjust.
(target_stack::unpush): Defref target.
(target_is_pushed): Return bool. Adjust to refer to the current
inferior's target stack.
(dispose_inferior): Delete, and inline parts ...
(target_preopen): ... here. Only dispose of the current inferior.
(target_detach): Hold strong target reference while detaching.
Pass target down.
(target_thread_name): Add assertion.
(target_resume): Pass down target.
(target_ops::beneath, find_target_at): Adjust to refer to the
current inferior's target stack.
(get_dummy_target): New.
(target_pass_ctrlc): Pass the Ctrl-C to the first inferior that
has a thread running.
(initialize_targets): Rename to ...
(_initialize_target): ... this.
* target.h: Include "gdbsupport/refcounted-object.h".
(struct target_ops): Inherit refcounted_object.
(target_ops::shortname, target_ops::longname): Make const.
(target_ops::async_wait_fd): New method.
(decref_target): Declare.
(struct target_ops_ref_policy): New.
(target_ops_ref): New typedef.
(get_dummy_target): Declare function.
(target_is_pushed): Return bool.
* thread-iter.c (all_matching_threads_iterator::m_inf_matches)
(all_matching_threads_iterator::all_matching_threads_iterator):
Handle filter target.
* thread-iter.h (struct all_matching_threads_iterator, struct
all_matching_threads_range, class all_non_exited_threads_range):
Filter by target too. Remove explicit.
* thread.c (threads_executing): Delete.
(inferior_thread): Pass down current inferior.
(clear_thread_inferior_resources): Pass down thread pointer
instead of ptid_t.
(add_thread_silent, add_thread_with_info, add_thread): Add
process_stratum_target parameter. Use it for thread and inferior
searches.
(is_current_thread): New.
(thread_info::deletable): Use it.
(find_thread_ptid, thread_count, in_thread_list)
(thread_change_ptid, set_resumed, set_running): New
process_stratum_target parameter. Pass it down.
(set_executing): New process_stratum_target parameter. Pass it
down. Adjust reference to 'threads_executing'.
(threads_are_executing): New process_stratum_target parameter.
Adjust reference to 'threads_executing'.
(set_stop_requested, finish_thread_state): New
process_stratum_target parameter. Pass it down.
(switch_to_thread): Also match inferior.
(switch_to_thread): New process_stratum_target parameter. Pass it
down.
(update_threads_executing): Reimplement.
* top.c (quit_force): Pop targets from all inferior.
(gdb_init): Don't call initialize_targets.
* windows-nat.c (windows_nat_target) <get_windows_debug_event>:
Declare.
(windows_add_thread, windows_delete_thread): Adjust.
(get_windows_debug_event): Rename to ...
(windows_nat_target::get_windows_debug_event): ... this. Adjust.
* tracefile-tfile.c (tfile_target_open): Pass down target.
* gdbsupport/common-gdbthread.h (struct process_stratum_target):
Forward declare.
(switch_to_thread): Add process_stratum_target parameter.
* mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target
parameter. Use it.
(mi_on_resume): Pass target down.
* nat/fork-inferior.c (startup_inferior): Add
process_stratum_target parameter. Pass it down.
* nat/fork-inferior.h (startup_inferior): Add
process_stratum_target parameter.
* python/py-threadevent.c (py_get_event_thread): Pass target down.
gdb/gdbserver/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* fork-child.c (post_fork_inferior): Pass target down to
startup_inferior.
* inferiors.c (switch_to_thread): Add process_stratum_target
parameter.
* lynx-low.c (lynx_target_ops): Now a process_stratum_target.
* nto-low.c (nto_target_ops): Now a process_stratum_target.
* linux-low.c (linux_target_ops): Now a process_stratum_target.
* remote-utils.c (prepare_resume_reply): Pass the target to
switch_to_thread.
* target.c (the_target): Now a process_stratum_target.
(done_accessing_memory): Pass the target to switch_to_thread.
(set_target_ops): Ajust to use process_stratum_target.
* target.h (struct target_ops): Rename to ...
(struct process_stratum_target): ... this.
(the_target, set_target_ops): Adjust.
(prepare_to_access_memory): Adjust comment.
* win32-low.c (child_xfer_memory): Adjust to use
process_stratum_target.
(win32_target_ops): Now a process_stratum_target.
Another bug exposed by gdb.server/extended-remote-restart.exp in the
multi-target work is that remote_target::start_remote can leave
inferior_ptid and current_inferior() out of sync:
(top-gdb) p current_inferior_->pid
$1 = 29541
(top-gdb) p inferior_ptid
$2 = {m_pid = 29540, m_lwp = 29540, m_tid = 0}
This is caused by writing to inferior_ptid directly instead of using
switch_to_thread. Also, "inferior_list->thread_list->ptid" assumes
that we want the first thread of the first inferior, but that inferior
may not have threads, or with multi-target, that target may be
connected to some other target.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* remote.c (remote_target::start_remote): Don't set inferior_ptid
directly. Instead find the first thread in the thread list and
use switch_to_thread.
The multi-target patch will change the remote target's behavior when:
- the current inferior is connected to an extended-remote target.
- the current inferior is attached to any process.
- some other inferior than than the current one is live.
In current master, we get:
(gdb) tar extended-remote :9999
A program is being debugged already. Kill it? (y or n)
While after multi-target, since each inferior may have its own target
connection, we'll get:
(gdb) tar extended-remote :9999
Already connected to a remote target. Disconnect? (y or n)
That change made gdb.server/extended-remote-restart.exp expose a gdb
bug, because it made "target remote", via gdb_reconnect, just
disconnect from the previous connection, while in current master that
command would kill the inferior before disconnecting. In turn, that
would make a multi-target gdb find processes already running under
control of gdbserver as soon as it reconnects, while in current master
there is never any process around when gdb reconnects, since they'd
all been killed prior to disconnection.
The bug this exposed is that remote_target::remote_add_inferior was
always reusing current_inferior() for the new process, even if the
current inferior was already bound to a process. In the testcase's
case, when we reconnect, the remote is debugging two processes. So
we'd bind the first remote process to the empty current inferior the
first time, and then bind the second remote process to the same
inferior again, essencially losing track of the first process. That
resulted in failed assertions when we look up the inferior for the
first process by PID. The fix is to still prefer binding to the
current inferior (so that plain "target remote" keeps doing what you'd
expect), but not reuse the current inferior if it is already bound to
a process.
This patch tweaks the test to explicitly disconnect before
reconnecting, to avoid GDB killing processes, thus making current GDB
behave the same as it will behave when the multi-target work lands.
That change alone without the GDB fix exposes the bug like so:
(gdb) PASS: gdb.server/extended-remote-restart.exp: kill: 0, follow-child 0: disconnect
target extended-remote localhost:2350
Remote debugging using localhost:2350
src/gdb/thread.c:93: internal-error: thread_info* inferior_thread(): Assertion `tp' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
The original bug that the testcase was written for was related to
killing, (git 9d4a934ce6 ("gdb: Fix assert for extended-remote
target (PR gdb/18050)")), but since the testcase tries reconnecting
with both explicitly killing and not explicitly killing, I think we're
covering the original bug with this testcase change.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* remote.c (remote_target::remote_add_inferior): Don't bind a
process to the current inferior if the current inferior is already
bound to a process.
gdb/testsuite/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdb.server/extended-remote-restart.exp (test_reload): Explicitly
disconnect before reconnecting.
The multi-target patch makes inferior_ptid point to null_ptid before
calling into target_wait, which catches bad uses of inferior_ptid,
since the current selected thread in gdb shouldn't have much relation
to the thread that reports an event.
One such bad use is found in remote_target::remote_parse_stop_reply,
where we handle the 'W' or 'X' packets (process exit), and the remote
target does not support the multi-process extensions, i.e., it does
not report the PID of the process that exited.
With the multi-target patch, that would result in a failed assertion,
trying to find the inferior for process pid 0.
gdb/ChangeLog:
2020-01-10 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Pedro Alves <palves@redhat.com>
* remote.c (remote_target::remote_parse_stop_reply) <W/X packets>:
If no process is specified, return null_ptid instead of
inferior_ptid.
(remote_target::wait_as): Handle TARGET_WAITKIND_EXITED /
TARGET_WAITKIND_SIGNALLED with no pid.
gdb/testsuite/ChangeLog:
2020-01-10 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Pedro Alves <palves@redhat.com>
* gdb.server/connect-without-multi-process.exp: Also test
continuing to end.
With current master, on a Fedora 27 machine with a kernel with buggy
watchpoint support, I see:
(gdb) PASS: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: hardware breakpoints work
continue
Continuing.
warning: Remote failure reply: E01
Remote communication error. Target disconnected.: Connection reset by peer.
(gdb) FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work
continue
The program is not being run.
(gdb) FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the first fork (the program is no longer running)
The FAILs themselves aren't what's interesting here. What is
interesting is that with the main multi-target patch applied, I was getting this:
(gdb) PASS: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: hardware breakpoints work
continue
Continuing.
warning: Remote failure reply: E01
/home/pedro/brno/pedro/gdb/binutils-gdb-2/build/../src/gdb/inferior.c:285: internal-error: inferior* find_inferior_pid(process_stratum_target*, int): Assertion `pid != 0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work (GDB internal error)
The problem is that in remote_target::wait_as, we're hitting this:
switch (buf[0])
{
case 'E': /* Error of some sort. */
/* We're out of sync with the target now. Did it continue or
not? Not is more likely, so report a stop. */
rs->waiting_for_stop_reply = 0;
warning (_("Remote failure reply: %s"), buf);
status->kind = TARGET_WAITKIND_STOPPED;
status->value.sig = GDB_SIGNAL_0;
break;
which leaves event_ptid as null_ptid. At the end of the function, we then reach:
else if (status->kind != TARGET_WAITKIND_EXITED
&& status->kind != TARGET_WAITKIND_SIGNALLED)
{
if (event_ptid != null_ptid)
record_currthread (rs, event_ptid);
else
event_ptid = inferior_ptid; <<<<< here
}
and the trouble is that with the multi-target patch, we'll get here
with inferior_ptid as null_ptid too. That is done exactly to find
these implicit assumptions that inferior_ptid is a good choice for
default thread, which isn't generaly true.
I first thought of fixing this in the "case 'E'" path, but, given that
this "event_ptid = inferior_ptid" path is also taken when the remote
target does not support threads at all, no thread-related packets or
extensions, it's better to fix it in latter path, to handle all
scenarios that miss reporting a thread.
That's what this patch does.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* remote.c (first_remote_resumed_thread): New.
(remote_target::wait_as): Use it as default event_ptid instead of
inferior_ptid.
It's not possible to open a tfile target with an invalid trace_fd, and
it's not possible to close a closed target, so this early return is dead.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* tracefile-tfile.c (tfile_target::close): Assert that trace_fd is
not -1.
- Make get_last_target_status arguments optional. A following patch
will add another argument to get_last_target_status (the event's
target), and passing nullptr when we don't care for some piece of
info is handier than creating dummy local variables.
- Declare nullify_last_target_wait_ptid in a header, and remove the
local extern declaration from linux-fork.c.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* break-catch-sig.c (signal_catchpoint_print_it): Don't pass a
ptid to get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Don't pass a
ptid to get_last_target_status.
* infcmd.c (continue_command): Don't pass a target_waitstatus to
get_last_target_status.
(info_program_command): Don't pass a target_waitstatus to
get_last_target_status.
* infrun.c (init_wait_for_inferior): Use
nullify_last_target_wait_ptid.
(get_last_target_status): Handle nullptr arguments.
(nullify_last_target_wait_ptid): Clear target_last_waitstatus.
(print_stop_event): Don't pass a ptid to get_last_target_status.
(normal_stop): Don't pass a ptid to get_last_target_status.
* infrun.h (get_last_target_status, set_last_target_status): Move
comments here and update.
(nullify_last_target_wait_ptid): Declare.
* linux-fork.c (fork_load_infrun_state): Remove local extern
declaration of nullify_last_target_wait_ptid.
* linux-nat.c (get_detach_signal): Don't pass a target_waitstatus
to get_last_target_status.
Once each inferior has its own target stack, we'll need to make sure
that the right inferior is selected before we call into target
methods.
It kind of sounds worse than it is in practice. Not that many places
need to be concerned.
In thread.c, we add a new switch_to_thread_if_alive function that
centralizes the switching before calls to target_thread_alive. Other
cases are handled with explicit switching.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdbthread.h (scoped_restore_current_thread)
<dont_restore, restore, m_dont_restore>: Declare.
* thread.c (thread_alive): Add assertion. Return bool.
(switch_to_thread_if_alive): New.
(prune_threads): Switch inferior/thread.
(print_thread_info_1): Switch thread before calling target methods.
(scoped_restore_current_thread::restore): New, factored out from
...
(scoped_restore_current_thread::~scoped_restore_current_thread):
... this.
(scoped_restore_current_thread::scoped_restore_current_thread):
Add assertion.
(thread_apply_all_command, thread_select): Use
switch_to_thread_if_alive.
* infrun.c (proceed, restart_threads, handle_signal_stop)
(switch_back_to_stepped_thread): Switch current thread before
calling target methods.
Several places want to switch context to an inferior and its pspace,
while at the same time switch to "no thread selected". This commit
adds a function that does that, and uses it in a few places.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* inferior.c (switch_to_inferior_no_thread): New function,
factored out from ...
(inferior_command): ... here.
* inferior.h (switch_to_inferior_no_thread): Declare.
* mi/mi-main.c (run_one_inferior): Use
switch_to_inferior_no_thread.
I believe this comment:
/* Killing off the inferior can leave us with a core file. If
so, print the state we are left in. */
Referred to the fact that a decade ago, by design, GDB would let you
type "run" when debugging a core dump, keeping the core open. That
"run" would push a process_stratum target on the target stack for the
live process, and, the core would remain open -- we used to have a
core_stratum. When the live process was killed/detached or exited,
GDB would go back to debugging the core, since the core_stratum target
was now at the top of the stack. That design had a number of
problems, see here for example:
https://sourceware.org/ml/gdb-patches/2008-08/msg00290.html
In 2010, core_stratum was finaly eliminated and cores now have
process_stratum too, with commit c0edd9edad ("Make core files the
process_stratum."). Pushing a live process on the stack while you're
debugging a core discards the core completely.
I also thought that this might be in use with checkpoints, but it does
not -- "kill" when you have multiple checkpoints kills all the
checkpoints.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* infcmd.c (kill_command): Remove dead code.
I believe the tail end of remote_target::mourn_inferior is broken, and
it's been broken for too long to even bother trying to fix. Most
probably nobody needs it. If the code is reached and we find the
target is running, we'd need to resync the thread list, at least,
since generic_mourn_inferior got rid of all the threads in the
inferior, otherwise, we'd hit an assertion on the next call to
inferior_thread(), for example. A "correct" fix would probably
involve restarting the whole remote_target::start_remote requence,
exactly as if we had completely disconnected and reconnected from
scratch.
Note that regular stub debugging usually uses plain target remote, but
this code is only reachable in target extended-mode:
- The !remote_multi_process_p check means that it's only reacheable if
the stub does not support multi-process. I.e., there can only ever
be one live process.
- remote_target::mourn_inferior has this at the top:
/* In 'target remote' mode with one inferior, we close the connection. */
if (!rs->extended && number_of_live_inferiors () <= 1)
{
unpush_target (this);
/* remote_close takes care of doing most of the clean up. */
generic_mourn_inferior ();
return;
}
Which means that if we only had one live inferior (which for our
case, must be true), we'll have closed the connection already,
unless we're in extended-remote mode.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* remote.c (remote_target::mourn_inferior): No longer check
whether the target is running.
With the multi-target work, each inferior will have its own target
stack, so to call a target method, we'll need to make sure that the
inferior in question is the current one, otherwise target->beneath()
calls will find the target beneath in the wrong inferior.
In some places, it's much more convenient to be able to check whether
an inferior has execution without having to switch to it in order to
call target_has_execution on the right inferior/target stack, to avoid
side effects with switching inferior/thread/program space.
The current target_ops::has_execution method takes a ptid_t as
parameter, which, in a multi-target world, isn't sufficient to
identify the target. This patch prepares to address that, by changing
the parameter to an inferior pointer instead. From the inferior,
we'll be able to query its target stack to tell which target is
beneath.
Also adds a new inferior::has_execution() method to make callers a bit
more natural to read.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* corelow.c (core_target::has_execution): Change parameter type to
inferior pointer.
* inferior.c (number_of_live_inferiors): Use
inferior::has_execution instead of target_has_execution_1.
* inferior.h (inferior::has_execution): New.
* linux-thread-db.c (thread_db_target::update_thread_list): Use
inferior::has_execution instead of target_has_execution_1.
* process-stratum-target.c
(process_stratum_target::has_execution): Change parameter type to
inferior pointer. Check the inferior's PID instead of
inferior_ptid.
* process-stratum-target.h
(process_stratum_target::has_execution): Change parameter type to
inferior pointer.
* record-full.c (record_full_core_target::has_execution): Change
parameter type to inferior pointer.
* target.c (target_has_execution_1): Change parameter type to
inferior pointer.
(target_has_execution_current): Adjust.
* target.h (target_ops::has_execution): Change parameter type to
inferior pointer.
(target_has_execution_1): Change parameter type to inferior
pointer. Change return type to bool.
* tracefile.h (tracefile_target::has_execution): Change parameter
type to inferior pointer.
Commit 20f0d60db4 ("Avoid crash when calling warning too early"),
added a "current_top_target () != NULL" check to
target_supports_terminal_ours, so this check in exceptions.c is now
obsolete.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* exceptions.c (print_flush): Remove current_top_target() check.
The "set remote exec-file" setting is per-inferior, but the "show
remote exec-file" command always shows the last set exec-file,
irrespective of the current inferior. E.g.:
# Set inferior 1's exec-file:
(gdb) set remote exec-file prog1
# Add inferior 2, switch to it, and set its exec-file:
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
(gdb) set remote exec-file prog2
# Switch back to inferior 1, and show its exec-file:
(gdb) inferior 1
(gdb) show remote exec-file
prog2
^^^^^ should show "prog1" instead here.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* remote.c (show_remote_exec_file): Show the current inferior's
exec-file instead of the command variable's value.
gdb/testsuite/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdb.base/remote-exec-file.exp: New file.
The multi-target patch sets inferior_ptid to null_ptid before handling
a target event, and thus before calling target_wait, in order to catch
places in target_ops::wait implementations that are incorrectly
relying on inferior_ptid (which could otherwise be a ptid of a
different target, for example). That caught this instance in
record-full.c.
Fix it by saving the last resumed ptid, and then using it in
record_full_wait_1, just like how the last "step" argument passed to
record_full_target::resume is handled too.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* record-full.c (record_full_resume_ptid): New global.
(record_full_target::resume): Set it.
(record_full_wait_1): Use record_full_resume_ptid instead of
inferior_ptid.
In non-stop mode, if you resume the program in the background (with
"continue&", for example), then gdb makes sure to not switch the
current thread behind your back. That means that you can be sure that
the commands you type apply to the thread you selected, even if some
other thread that was running in the background hits some event just
while you're typing.
In all-stop mode, however, if you resume the program in the
background, gdb let's the current thread switch behind your back.
This is bogus, of course. All-stop and non-stop background
resumptions should behave the same.
This patch fixes that, and adds a testcase that exposes the bad
behavior in current master.
The fork-running-state.exp changes are necessary because that
preexisting testcase was expecting the old behavior:
Before:
continue &
Continuing.
(gdb)
[Attaching after process 8199 fork to child process 8203]
[New inferior 2 (process 8203)]
info threads
Id Target Id Frame
1.1 process 8199 "fork-running-st" (running)
* 2.1 process 8203 "fork-running-st" (running)
(gdb)
After:
continue &
Continuing.
(gdb)
[Attaching after process 24660 fork to child process 24664]
[New inferior 2 (process 24664)]
info threads
Id Target Id Frame
* 1.1 process 24660 "fork-running-st" (running)
2.1 process 24664 "fork-running-st" (running)
(gdb)
Here we see that before this patch GDB switches current inferior to
the new inferior behind the user's back, as a side effect of handling
the fork.
The delete_exited_threads call in inferior_appeared is there to fix an
issue that Baris found in a previous version of this patch. The
fetch_inferior_event change increases the refcount of the current
thread, and in case the fetched inferior event denotes a thread exit,
the thread will not be deleted right away. A non-deleted but exited
thread stays in the inferior's thread list. This, in turn, causes the
"init_thread_list" call in inferior.c to be skipped. A consequence is
that the global thread ID counter is not restarted if the current
thread exits, and then the inferior is restarted:
(gdb) start
Temporary breakpoint 1 at 0x4004d6: file main.c, line 21.
Starting program: /tmp/main
Temporary breakpoint 1, main () at main.c:21
21 foo ();
(gdb) info threads -gid
Id GId Target Id Frame
* 1 1 process 16106 "main" main () at main.c:21
(gdb) c
Continuing.
[Inferior 1 (process 16106) exited normally]
(gdb) start
Temporary breakpoint 2 at 0x4004d6: file main.c, line 21.
Starting program: /tmp/main
Temporary breakpoint 2, main () at main.c:21
21 foo ();
(gdb) info threads -gid
Id GId Target Id Frame
* 1 2 process 16138 "main" main () at main.c:21
^^^
Notice that GId == 2 above. It should have been "1" instead.
The new tids-git-reset.exp testcase exercises the problem above.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdbthread.h (scoped_restore_current_thread)
<dont_restore, restore, m_dont_restore>: Declare.
* thread.c (thread_alive): Add assertion. Return bool.
(switch_to_thread_if_alive): New.
(prune_threads): Switch inferior/thread.
(print_thread_info_1): Switch thread before calling target methods.
(scoped_restore_current_thread::restore): New, factored out from
...
(scoped_restore_current_thread::~scoped_restore_current_thread):
... this.
(scoped_restore_current_thread::scoped_restore_current_thread):
Add assertion.
(thread_apply_all_command, thread_select): Use
switch_to_thread_if_alive.
gdb/testsuite/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdb.base/fork-running-state.exp (do_test): Adjust expected
output.
* gdb.threads/async.c: New.
* gdb.threads/async.exp: New.
* gdb.multi/tids-gid-reset.c: New.
* gdb.multi/tids-gid-reset.exp: New.
According to the SystemTap documentation on user-space probes[0], stap
probe points without semaphores are denoted by setting the semaphore
address in the probe's note to zero. At present the code does do a
comparison of the semaphore address against zero, but only after it's
been relocated; as such it will (almost?) always fail, commonly
resulting in GDB trying to overwrite the ELF magic located at the
image's base address.
This commit tests the address as specified in the SDT note rather than
the relocated value in order to correctly detect absent probe
semaphores.
[0]: https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation
gdb/Changelog:
2020-01-11 George Barrett <bob@bob131.so>
* stap-probe.c (stap_modify_semaphore): Don't check for null
semaphores.
(stap_probe::set_semaphore, stap_probe::clear_semaphore): Check
for null semaphores.
gdb/testsuite/ChangeLog:
2020-01-11 George Barrett <bob@bob131.so>
* gdb.base/stap-probe.c (relocation_marker): Add dummy variable
to help in finding the image relocation offset.
* gdb.base/stap-probe.exp (stap_test): Accept arbitrary compile
options in arguments.
(stap_test_no_debuginfo): Likewise.
(stap-probe-nosem-noopt-pie, stap-probe-nosem-noopt-nopie): Add
test variants.
(stap_test): Add null semaphore relocation test.
Until recently when the source window was scrolled the assembler
window would scroll in sync - keeping the disassembly for the current
line in view.
This was broken in commit:
commit b4b49dcbff
Date: Wed Nov 13 16:47:58 2019 -0700
Don't call tui_show_source from tui_ui_out
This commit restores the synchronised scrolling and also maintains the
horizontal scroll within the source view when it is vertically
scrolled, something that was broken before.
This commit does not mean that scrolling the assembler view scrolls
the source view. The connection this way never existed, though maybe
it should, but I'll leave adding this feature for a separate commit.
gdb/ChangeLog:
* tui/tui-source.c (tui_source_window::do_scroll_vertical): Update
all source windows, and maintain horizontal scroll status while
doing so.
gdb/testsuite/ChangeLog:
* gdb.tui/basic.exp: Add more scrolling tests.
Change-Id: I250114a3bc670040a6a759d41905776771b2f818
Hannes Domani pointed out that my previous patch to fix the "list"
command in the TUI instead broke vertical scrolling. While looking at
this, I found that do_scroll_vertical calls print_source_lines, which
seems like a very roundabout way to change the source window. This
patch removes this oddity and fixes the bug at the same time.
I've added a new test case. This is somewhat tricky, because the
obvious approach of sending a dummy command after the scroll did not
work -- due to how the TUI works, sennding a command causes the scroll
to take effect.
gdb/ChangeLog
2019-12-22 Tom Tromey <tom@tromey.com>
PR tui/18932:
* tui/tui-source.c (tui_source_window::do_scroll_vertical): Call
update_source_window, not print_source_lines.
gdb/testsuite/ChangeLog
2019-12-22 Tom Tromey <tom@tromey.com>
PR tui/18932:
* lib/tuiterm.exp (Term::wait_for): Rename from _accept. Return a
meangingful value.
(Term::command, Term::resize): Update.
* gdb.tui/basic.exp: Add scrolling test.
Change-Id: I9636a7c8a8cade37431c6165ee996a9d556ef1c8
Currently if a user starts the tui with 'layout asm' then they will be
presented with the 'src' layout.
What happens is:
1. Layout command enables TUI, selecting the SRC layout by default.
2. As part of tui_enable we call tui_display_main, which calls
tui_get_begin_asm_address, which calls
set_default_source_symtab_and_line. This changes core GDBs
current symtab and line, which triggers a call to the symtab
changed hook tui_symtab_changed, which sets the flag
from_source_symtab.
3. Back in the layout command, the layout is changed from SRC to
ASM. After this the layout command completes and we return to
core GDB which prints the prompt, however...
4. The before prompt hook is called which sees the
from_source_symtab flag is set and forces the SRC window to be
displayed. This switches us back to SRC view.
The solution I propose here is to delay installing the hooks into core
GDB until after we have finished setting up the tui and selecting the
default frame to view. In this way we effectively ignore the first
symtab changed event triggered when making main the default symtab.
gdb/ChangeLog:
* tui/tui.c (tui_enable): Register tui hooks after calling
tui_display_main.
gdb/testsuite/ChangeLog:
* gdb.tui/tui-layout-asm.exp: New file.
Change-Id: I858ab81a17ffb4aa72deb3f36c3755228a9c9d9a
Recent MinGW versions require -lssp when using _FORTIFY_SOURCE, which
gdb does (in common-defs.h)
https://github.com/msys2/MINGW-packages/issues/5868#issuecomment-544107564
To avoid all the complications with checking for -lssp and making sure it's
linked statically, just don't define it.
gdb/ChangeLog:
2020-01-09 Christian Biesinger <cbiesinger@google.com>
* gdbsupport/common-defs.h: Don't define _FORTIFY_SOURCE on MinGW.
Change-Id: Ide6870ab57198219a2ef78bc675768a789ca2b1d
The body of this this big "for" loop is missing an indentation level,
this patch fixes that.
gdb/ChangeLog:
* thread.c (print_thread_info_1): Fix indentation.
compute_and_set_names would only free the name if we did not find the name
in the hashtable, but it needs to always free it. Solve this by moving the
smart pointer outside the if.
Thanks to PhilippeW for finding this.
gdb/ChangeLog:
2020-01-09 Christian Biesinger <cbiesinger@google.com>
* symtab.c (general_symbol_info::compute_and_set_names): Move the
unique_xmalloc_ptr outside the if to always free the demangled name.
Change-Id: Id7c6b8408432183700ccb5ff634818d6c5a3ac95
This replaces two instances of manual string management in
dwarf2read.c with std::string.
gdb/ChangeLog
2020-01-08 Tom Tromey <tromey@adacore.com>
* dwarf2read.c (parse_macro_definition): Use std::string.
(parse_macro_definition): Likewise.
Change-Id: Iec437100105484aa4a116fb5d651d7ed52ee9d81
This removes some manual memory management from
abbrev_table_read_table, replacing it with a std::vector.
gdb/ChangeLog
2020-01-08 Tom Tromey <tromey@adacore.com>
* dwarf2read.c (abbrev_table_read_table): Use std::vector.
(ATTR_ALLOC_CHUNK): Remove.
Change-Id: I0b0e70ac2281d89a78f4d6a642700c9f0506871d
This changes fixup_go_packaging to use unique_xmalloc_ptr. I kept
this patch separate as it is slightly more complicated than the
previous changes.
gdb/ChangeLog
2020-01-08 Tom Tromey <tromey@adacore.com>
* dwarf2read.c (fixup_go_packaging): Use unique_xmalloc_ptr.
Change-Id: I0c553d0c6579db478c27bc40fc21133a61e1a4d9
I noticed a few spots in dwarf2read.c that could be improved by moving
to unique_xmalloc_ptr or, in one case, std::vector.
gdb/ChangeLog
2020-01-08 Tom Tromey <tromey@adacore.com>
* dwarf2read.c (add_partial_symbol): Use unique_xmalloc_ptr.
(dwarf2_compute_name, open_dwo_file): Likewise.
(process_enumeration_scope): Use std::vector.
(guess_partial_die_structure_name): Use unique_xmalloc_ptr.
(partial_die_info::fixup, dwarf2_start_subfile)
(guess_full_die_structure_name, dwarf2_name): Likewise.
(determine_prefix): Update.
(guess_full_die_structure_name): Make return type const.
(partial_die_full_name): Return unique_xmalloc_ptr.
(DW_FIELD_ALLOC_CHUNK): Remove.
Change-Id: I1cb278c608041ef36ef1f77c7e7565c921038d08
PR build/24937 concerns an error given by the clang provided by a
particular version of macOS. In particular, it reports
error: default initialization of an object of const type 'const
stap_static_probe_ops' without a user-provided default constructor
Although (at least according to sources I found online) this was
resolved as a bug in the standard, it seemed simple enough to work
around this.
Given that this is a trivial build fix, I think it should go on the
gdb 9 branch as well.
gdb/ChangeLog
2020-01-07 Tom Tromey <tromey@adacore.com>
PR build/24937:
* stap-probe.c (class stap_static_probe_ops): Add constructor.
Change-Id: I18f180c17850f420e9b66afc67f9cb3d8dceb0b3
Cygwin meets the expectations of gdb for styling (if TERM is set and not
'DUMB', the terminal supports 'ANSI' (ECMA-48) escape sequences.
gdb/ChangeLog:
2020-01-02 Jon Turney <jon.turney@dronecode.org.uk>
* cli/cli-style.c: Set cli_styling to 'true' in the Cygwin build.
In this commit:
commit ec8e2b6d30
Date: Fri Jun 14 23:43:00 2019 +0100
gdb: Don't allow annotations to influence what else GDB prints
A change was accidentally made that moved a call to do_gdb_disassembly
out of an if block guarded by 'if (source_print && sal.symtab)'. The
result was that if a user has 'set disassemble-next-line on' then the
backtrace would now include some disassembly of a few instructions in
each frame.
This change was not intentional, but was not spotted by any tests.
This commit restores the old behaviour and adds a test to ensure this
doesn't break again in the future.
gdb/ChangeLog:
* stack.c (print_frame_info): Move disassemble_next_line code
inside source_print block.
gdb/testsuite/ChangeLog:
* gdb.base/backtrace.c: New file.
* gdb.base/backtrace.exp: New file.
Change-Id: I47c52a202fa74be138382646b695827940178689
gdb/ChangeLog
2020-01-06 Eli Zaretskii <eliz@gnu.org>
* gdbsupport/gdb_wait.c: Include <signal.h> instead of
gdb/signals.h, as we are now using native signal symbols.
In tui_disasm_window::addr_is_displayed(), there can be situations
where "content" is empty. For instance, it can happen when the
"content" was not filled in tui_disasm_window::set_contents(),
because tui_disassemble() threw an exception. Usually this exception
is the result of fetching invalid PC addresses like the ones beyond
the end of the program.
Having "content.size ()" zero leads to an overflow in this condition
check inside tui_disasm_window::addr_is_displayed():
int i = 0;
while (i < content.size () - threshold ...) {
... content[i] ...
}
"threshold" is 2 and there are times that "content.size ()" is 0.
This results into an overflow and the loop is entered whereas it
should have been skipped. Finally, "content[i]" access leads to
a segmentation fault.
Same problem applies to tui_source_window::line_is_displayed().
The issue has been discussed at length in bug 25345:
https://sourceware.org/bugzilla/show_bug.cgi?id=25345
This commit avoids the segmentation faults with an early check:
if (content.size () < SCROLL_THRESHOLD)
return false;
Moreover, those functions have been overhauled to a leaner code.
gdb/ChangeLog:
2020-01-06 Shahab Vahedi <shahab@synopsys.com>
* tui/tui-disasm.c (tui_disasm_window::addr_is_displayed): Avoid
overflow by an early check of content vs threshold.
* tui/tui-source.c (tui_source_window::line_is_displayed):
Likewise.
Don't try to read the PE export table when no section contains the RVA
for it.
(I have a PE executable [1] packed with UPX, where the export table data
directory entry contains a RVA which doesn't correspond to any section.
Mistakenly trying to debug this with gdb makes it crash.)
[1] https://cygwin.com/setup/setup-2.898.x86_64.exe
gdb/ChangeLog:
2020-01-02 Jon Turney <jon.turney@dronecode.org.uk>
* coff-pe-read.c (read_pe_exported_syms): Don't try to read the
export table if no section contains it's RVA.
The variable last_line_listed is never set when print_source_lines_base is
called in TUI mode, so the search always started from the last line printed
outside of TUI mode.
gdb/ChangeLog:
2020-01-06 Hannes Domani <ssbssa@yahoo.de>
* source.c (print_source_lines_base): Set last_line_listed.
When a Windows program is terminated by a fatal exception, its exit
code is the value of that exception, as defined by the various
EXCEPTION_* symbols in the Windows API headers. This commit emulates
WTERMSIG etc. by translating the fatal exception codes to more-or-less
equivalent Posix signals.
gdb/ChangeLog:
2020-01-06 Eli Zaretskii <eliz@gnu.org>
Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add gdbsupport/gdb_wait.c.
* windows-tdep.c: New enumeration of WINDOWS_SIG* signals.
(windows_gdb_signal_to_target): New function, uses the above
enumeration to convert GDB internal signal codes to equivalent
Windows codes.
(windows_init_abi): Call set_gdbarch_gdb_signal_to_target.
* windows-nat.c: Include "gdb_wait.h".
(get_windows_debug_event): Extract the fatal exception from the
exit status and convert to the equivalent Posix signal number.
* cli/cli-cmds.c (exit_status_set_internal_vars): Account for the
possibility that WTERMSIG returns GDB_SIGNAL_UNKNOWN.
* gdbsupport/gdb_wait.c: New file, implements
windows_status_to_termsig.
* gdbsupport/gdb_wait.h (WIFEXITED, WIFSIGNALED, WEXITSTATUS)
(WTERMSIG) [__MINGW32__]: Separate definitions for MinGW.
gdb/gdbserver/ChangeLog:
2020-01-06 Eli Zaretskii <eliz@gnu.org>
Pedro Alves <palves@redhat.com>
* win32-low.c (get_child_debug_event): Extract the fatal exception
from the exit status and convert to the equivalent Posix signal
number.
(win32_wait): Allow TARGET_WAITKIND_SIGNALLED status as well.
* Makefile.in (OBS, SFILES): Add gdb_wait.[co].
When calling tui_add_win_to_layout, use tui_set_layout not show_layout
so that window focus is correctly updated. If the focus is not
correctly maintained then GDB can be crashed like this:
start
tui enable
layout asm
list SOME_FUNCTION
At this point GDB will have "popped up" the source window to
display SOME_FUNCTION. Previously no window would have focus at this
point, and so if the user now does 'focus next' or 'focus prev', then
GDB would crash.
Calling tui_set_layout ensures that focus is correctly calculated as
the source window is "popped up", and this fixes the issue.
gdb/ChangeLog:
* tui/tui-layout.c (tui_add_win_to_layout): Use tui_set_layout not
show_layout.
gdb/testsuite/ChangeLog:
* gdb.tui/list.exp: Test 'focus next' after 'list main'.
Change-Id: Id0b13f99b0e889261efedfd0adabe82020202f44
While investigating some SVE code, i noticed the use of two spu bfd variables.
This looks like an oversight, as the "id" field is available for non-spu
architectures as well, even though its primary use was the Cell BE
architecture.
gdb/ChangeLog:
2020-01-05 Luis Machado <luis.machado@linaro.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::thread_architecture): Use bfd_arch_aarch64
and bfd_mach_aarch64.
While handling the comments of Tom related to
[RFC] Have an option to tell GDB to detect and possibly handle mismatched exec-files.
https://sourceware.org/ml/gdb-patches/2019-12/msg00621.html
I saw that GDB warnings are produced ignoring the given styles.
This patch:
* ensures that style markups are properly handled by "warning".
* changes 'set/show data-directory' so that file style is used
in warnings and in 'show message'
* changes all other messages in top.c to use file style when appropriate.
* Uses the above data-directory changes in gdb.base/style.exp
2020-01-03 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* ui-file.c (stdio_file::can_emit_style_escape)
(tee_file::can_emit_style_escape): Ensure style is used also on
gdb_stderr when gdb_stderr is a tty supporting styling, similarly
to gdb_stdout.
* main.c (set_gdb_data_directory): Use file style to output the
warning that the given pathname is not a directory.
* top.c (show_history_filename, gdb_safe_append_history)
(show_gdb_datadir): Use file style.
2020-01-03 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/style.exp: Test that warnings are styled.
gdb/ChangeLog:
2020-01-03 Hannes Domani <ssbssa@yahoo.de>
* solib-target.c (struct lm_info_target):
Change offsets to be a unique_xmalloc_ptr.
(solib_target_relocate_section_addresses): Update.
While reading some code i noticed we're still referencing Cell BE in a couple
parts. This patch removes those.
v2: Update comment in gdb/target.h.
gdb/ChangeLog:
2020-01-02 Luis Machado <luis.machado@linaro.org>
* proc-service.c (get_ps_regcache): Remove reference to obsolete
Cell BE architecture.
* target.h (struct target_ops) <thread_architecture>: Likewise.
Change-Id: I7a9ccc603b00db22a6275bc5ab69e1417148cb72
The variable INSTALL_PROGRAM_ENV sets up STRIPPROG for the cross-compiler.
If this is not done, the host 'strip' is used, and fails:
/bin/sh /c/src/repos/binutils-gdb.git/install-sh -c -s gdb.exe \
/gdb/gdb64-git/bin/$transformed_name.exe
strip.exe:C:/gdb/gdb64-git/bin/_inst.33599_: file format not recognized
With this change, it's fine:
STRIPPROG='x86_64-w64-mingw32-strip' \
/bin/sh /c/src/repos/binutils-gdb.git/install-sh -c -s gdb.exe \
/gdb/gdb64-git/bin/$transformed_name.exe
gdb/ChangeLog:
2020-01-01 Hannes Domani <ssbssa@yahoo.de>
* Makefile.in: Use INSTALL_PROGRAM_ENV.
gdb/gdbserver/ChangeLog:
2020-01-01 Hannes Domani <ssbssa@yahoo.de>
* Makefile.in: Use INSTALL_PROGRAM_ENV.
These are files that need to be updated by hand, because the copyright.py
script isn't able to handle them automatically.
gdb/ChangeLog:
* gdbarch.sh: Update copyright year range of generated files.
gdb/doc/ChangeLog:
* gdb.texinfo, refcard.tex: Update copyright year range.
This changes a few TUI globals to be "static". Tested by rebuilding.
gdb/ChangeLog
2019-12-30 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (tui_border_mode_translate)
(tui_border_kind_translate_vline, tui_border_kind_translate_hline)
(tui_border_kind_translate_ulcorner)
(tui_border_kind_translate_urcorner)
(tui_border_kind_translate_llcorner)
(tui_border_kind_translate_lrcorner, tui_active_border_mode)
(tui_border_mode, tui_border_kind): Now static.
Change-Id: Ibb49a0df195dfe780a5ba1f90e9125ab5f6b7ce1
This changes a few spots in the TUI to use "bool" rather than "int".
Tested on x86-64 Fedora 28.
gdb/ChangeLog
2019-12-30 Tom Tromey <tom@tromey.com>
* tui/tui-interp.c (tui_start_enabled): Now bool.
(_initialize_tui_interp): Update.
* tui/tui-hooks.c (tui_refreshing_registers): Now bool.
(tui_register_changed)
(tui_refresh_frame_and_register_information): Update.
* tui/tui-win.c (tui_update_variables): Return bool.
* tui/tui-win.h (tui_update_variables): Return bool.
* tui/tui.c (tui_get_command_dimension): Return bool.
* tui/tui.h (tui_get_command_dimension): Return bool.
Change-Id: I55b7f2d62d2ef88da3587dc914ada9f463ad8d2b
This removes code that was present from the very first git revisison
7b4ac7e1ed from 1988. It was in the
gdb/dbxread.c at the time (and makes more sense for dbx line info format
since line numbers are 16-bit entities in that debug format and debugging
files with more than 65535 lines would not work anyway) but moved from
there to gdb/buildsym.c which is used for dwarf line info as well, and
excluding an arbitrary line number does certainly not make sense nowadays.
Add a test case for line 65535
gdb:
2019-12-29 Bernd Edlinger <bernd.edlinger@hotmail.de>
* buildsym.c (buildsym_compunit::record_line): Do no longer ignore
line 65535.
gdb/testsuite:
2019-12-29 Bernd Edlinger <bernd.edlinger@hotmail.de>
* gdb.base/line65535.exp: New file.
* gdb.base/line65535.c: New file.
I found some dead code in the TUI -- some using #if 0, and some
commented-out code. There's no reason to keep this, so this patch
removes it.
gdb/ChangeLog
2019-12-27 Tom Tromey <tom@tromey.com>
* tui/tui-source.c (tui_source_window::do_scroll_vertical): Remove
commented-out code.
* tui/tui.c: Remove #if 0 code.
Change-Id: Ie00933b2ba498417ce22e5da3f62f5a40c234f33
I noticed that print_disassembly has two #if blocks for TUI code,
where one would do. This patch rearranges the code slightly to remove
a #if.
gdb/ChangeLog
2019-12-27 Tom Tromey <tom@tromey.com>
* cli/cli-cmds.c (print_disassembly): Reorder "if".
Change-Id: I36f3f682f5685b3d9b148da5aed26eb3cc7d598e
This changes tui_active and tui_finish_init to have type "bool".
gdb/ChangeLog
2019-12-27 Tom Tromey <tom@tromey.com>
* tui/tui.c (tui_active): Now bool.
(tui_finish_init): Likewise.
(tui_enable): Update.
(tui_disable): Update.
(tui_is_window_visible): Update.
* tui/tui.h (tui_active): Now bool.
Change-Id: Ia159ae9beb041137e34956b77f5bcf4e83eaf2b9
tui_gen_win_info::viewport_height is only used in a couple of spots,
and is redundant with "height". This patch removes viewport_height.
gdb/ChangeLog
2019-12-27 Tom Tromey <tom@tromey.com>
* tui/tui-source.c (tui_source_window::maybe_update): Update.
* tui/tui-regs.c (tui_data_window::display_registers_from):
Update.
* tui/tui-layout.c (tui_gen_win_info::resize): Update.
* tui/tui-data.h (struct tui_gen_win_info) <viewport_height>:
Remove.
* tui/tui-command.c (tui_cmd_window::resize): Update.
Change-Id: I020e026fbe289adda8e2fdfebca91bdbdbc312e8
This also renames it to make it clearer that this is not a cheap
function (to compute_and_set_names). Also renames name to m_name
to make the implementation of the renamed function more readable.
Most of the places that access sym->m_name directly were also changed
to call linkage_name () instead, to make it clearer which name they
are accessing.
gdb/ChangeLog:
2019-12-26 Christian Biesinger <cbiesinger@google.com>
* ada-lang.c (ada_decode_symbol): Update.
* buildsym.c (add_symbol_to_list): Update.
* coffread.c (process_coff_symbol): Update.
* ctfread.c (ctf_add_enum_member_cb): Update.
(new_symbol): Update.
(ctf_add_var_cb): Update.
* dwarf2read.c (fixup_go_packaging): Update.
(dwarf2_compute_name): Update.
(new_symbol): Update.
* jit.c (finalize_symtab): Update.
* language.c (language_alloc_type_symbol): Update.
* mdebugread.c (new_symbol): Update.
* minsyms.c (minimal_symbol_reader::record_full): Update.
(minimal_symbol_reader::install): Update.
* psymtab.c (print_partial_symbols): Update.
(psymbol_hash): Update.
(psymbol_compare): Update.
(add_psymbol_to_bcache): Update.
(maintenance_check_psymtabs): Update.
* stabsread.c (define_symbol): Update.
* symtab.c (symbol_set_names): Rename to...
(general_symbol_info::compute_and_set_names): ...this.
(general_symbol_info::natural_name): Update.
(general_symbol_info::search_name): Update.
(fixup_section): Update.
* symtab.h (struct general_symbol_info) <name>: Rename to...
<m_name>: ...this.
<compute_and_set_names>: Rename from...
(symbol_set_names): ...this.
(SYMBOL_SET_NAMES): Remove.
(struct symbol) <ctor>: Update.
Change-Id: I8da1f10cab4e0b89f19d5750fa4e6e2ac8d2b24f
Now that we enabled it by default, this change adds a NEWS entry for it.
gdb/ChangeLog:
2019-12-26 Christian Biesinger <cbiesinger@google.com>
* NEWS: Mention that multithreaded symbol loading is now on by
default.
Change-Id: Ic344596a3b1b6e612a0071a50df49588b833c15d
The SVR4 solib event handler determines whether an event is related to a
non-base link namespace by comparing the event's debug struct address
to the debug struct address of the initial program image. However, this
can fail when using LD_AUDIT as audit libraries are loaded before the
loader has initialised the initial program image's debug struct. When
the event handler fails to find the debug struct, the probe-based
debugger interface is disabled and a warning is flagged to the user.
This commit adds a fallback test to help determine whether an event is
for a foreign link namespace when the debug struct isn't available.
gdb/ChangeLog:
2019-12-15 George Barrett <bob@bob131.so>
* solib-svr4.c (svr4_handle_solib_event): Add fallback link
namespace test for when the debug struct isn't available.
gdb/ChangeLog
2019-12-21 Eli Zaretskii <eliz@gnu.org>
* top.c (print_gdb_configuration): Print "--with-xxhash" or
"--without-xxhash" according to HAVE_LIBXXHASH.
* Use the type-safe registry for ctf_file_key;
* Drop "typedef" when defining "struct ctf_context";
* Use ANOFFSET with SECT_OFF_TEXT to get the text base address;
gdb/ChangeLog
2019-12-20 Weimin Pan <weimin.pan@oracle.com>
* ctfread.c (ctf_file_key): Change type to objfile_key.
(struct ctf_context): Remove typedef.
(get_objfile_text_range): Use ANOFFSET to get text base.
This is a refactoring. Instead of a plain unsigned value, use an enum
bitfield.
gdb/ChangeLog:
2019-12-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* dwarf2read.c (is_valid_DW_AT_calling_convention_for_subroutine):
New function.
(read_subroutine_type): Validate the parsed
DW_AT_calling_convention value before assigning it to a
subroutine's calling_convention attribute.
* gdbtypes.h (struct func_type) <calling_convention>: Use
an enum bitfield as its type, instead of plain unsigned.
Change-Id: Ibc6b2f71e885cbc5c3c9d49734f7125acbfd1bcd
If an aggregate argument is implicitly pass-by-reference, allocate a
temporary object on the stack, initialize it via the copy constructor
(if exists) or trivially by memcpy'ing. Pass the reference of the
temporary to the callee function. After the callee returns, invoke
the destructor of the temporary.
gdb/ChangeLog:
2019-12-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
PR gdb/25054
* infcall.c (call_function_by_hand_dummy): Update the argument-
passing section for call-by-value parameters.
(struct destructor_info): New struct.
(call_destructors): New auxiliary function.
Change-Id: I18fa5d0df814dfa0defe9e862a88a6dbf1d99d01
Walk through a given type to collect information about whether the
type is copy constructible, destructible, trivially copyable,
trivially copy constructible, trivially destructible. The previous
algorithm returned only a boolean result about whether the type is
trivially copyable. This patch computes more info. Additionally, it
utilizes DWARF attributes that were previously not taken into account;
namely, DW_AT_deleted, DW_AT_defaulted, and DW_AT_calling_convention.
gdb/ChangeLog:
2019-12-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gnu-v3-abi.c (enum definition_style): New enum type.
(get_def_style): New function.
(is_user_provided_def): New function.
(is_implicit_def): New function.
(is_copy_or_move_constructor_type): New function.
(is_copy_constructor_type): New function.
(is_move_constructor_type): New function.
(gnuv3_pass_by_reference): Collect language_pass_by_ref_info
for a given type.
Change-Id: Ic05bd98a962d07ec3c1ad041f709687eabda3bb9
In C++, call-by-value arguments that cannot be trivially copied are
implicitly passed by reference. When making an infcall, GDB needs to
find out if an argument is pass-by-reference or not, so that the
correct semantics can be followed. This patch enriches the
information computed by the language ops for pass-by-reference
arguments. Instead of a plain binary result, the computed information
now includes whether the argument is
- copy constructible
- destructible
- trivially copyable
- trivially copy constructible
- trivially destructible
This information is stored in a struct named 'language_pass_by_ref_info'.
This patch paves the way for GDB's infcall mechanism to call the copy
ctor and the destructor of a pass-by-ref argument appropriately.
gdb/ChangeLog:
2019-12-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* language.h (struct language_pass_by_ref_info): New struct.
(struct language_defn)<la_pass_by_reference>: Change the signature
to return a language_pass_by_ref_info instead of an int.
(language_pass_by_reference): Ditto.
(default_pass_by_reference): Ditto.
Adjust the users listed below.
* arch-utils.c (default_return_in_first_hidden_param_p):
Update.
* cp-abi.c (cp_pass_by_reference): Update.
* cp-abi.h (cp_pass_by_reference): Update declaration.
(struct cp_abi_ops)<pass_by_reference>: Update.
* gnu-v3-abi.c (gnuv3_pass_by_reference): Update.
* infcall.c (call_function_by_hand_dummy): Update.
* language.c (language_pass_by_reference): Update.
(default_pass_by_reference): Update.
* tic6x-tdep.c (tic6x_return_value): Update.
Change-Id: Ib1c1f87f2490a5737c469f7b7185ddc7f6a164cb
Extend GDB's internal representation of types to include the
DW_AT_calling_convention, DW_AT_defaulted, and DW_AT_deleted attributes
that were introduced in DWARF5.
These attributes will be helpful in a future patch about infcall'ing
functions with call-by-value parameters. GDB will use the attributes
to decide whether the type of a call-by-value parameter is implicitly
pass-by-reference.
gdb/ChangeLog:
2019-12-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* dwarf2read.c (dwarf2_add_member_fn): Read the DW_AT_defaulted
and DW_AT_deleted attributes of a function.
(read_structure_type): Read the DW_AT_calling_convention attribute
of a type.
(is_valid_DW_AT_defaulted): New function.
(is_valid_DW_AT_calling_convention_for_type): New function.
* gdbtypes.h: Include dwarf2.h.
(struct fn_field)<defaulted>: New field to store the
DW_AT_defaulted attribute.
(struct fn_field)<is_deleted>: New field to store the
DW_AT_deleted attribute.
(struct cplus_struct_type)<calling_convention>: New field to store
the DW_AT_calling_convention attribute.
(TYPE_FN_FIELD_DEFAULTED): New macro.
(TYPE_FN_FIELD_DELETED): New macro.
(TYPE_CPLUS_CALLING_CONVENTION): New macro.
* gdbtypes.c (dump_fn_fieldlists): Update for the changes made
to the .h file.
(print_cplus_stuff): Likewise.
Change-Id: I54192f363115b78ec7435a8563b73fcace420765
This removes the call to tui_show_source from tui_ui_out. This always
seemed like a hack, and now that the TUI is using the proper
observers, it seems not to be needed.
The rest of the logic remains, unfortunately, because it is needed to
suppress some gdb output in the TUI case. We could probably find a
nicer way to do this (maybe a ui_out_flag), but I haven't attempted
this.
This was the last caller of tui_show_source, so this is removed as
well.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui.c (tui_show_source): Remove.
* tui/tui.h (tui_show_source): Don't declare.
* tui/tui-out.c (tui_ui_out::do_field_string): Don't call
tui_show_source.
Change-Id: Id71098e597ee4ebfef0429562baa45f537bd2c2b
PR tui/18932 notes that "list" no longer works in the TUI. At some
point in the past, it switched the TUI source window to show the
specified source; but now this source briefly flashes before the TUI
reverts to showing the current stack frame's source.
This patch fixes this bug by introducing a new observer that notices
when the user selected context has changed. Then, the existing
before-prompt observer is updated to request the correct update:
either one based on the current stack frame, or one based on the
user's source symtab_and_line.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
PR tui/18932:
* tui/tui-hooks.c (tui_refresh_frame_and_register_information):
Rename parameters. Handle the not-from-stack-frame case.
(from_stack, from_source_symtab): New globals.
(tui_before_prompt, tui_normal_stop): Update.
(tui_context_changed, tui_symtab_changed): New functions.
(tui_attach_detach_observers): Attach new observers.
gdb/testsuite/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* gdb.tui/list-before.exp: New file.
Change-Id: I62013825f6c1afdd568a1c7a8c019b0c881131af
This patch adds an observable, so that a later patch can change the
TUI to notice when the user has selected a new source symtab, say via
"list".
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* source.c (struct current_source_location) <set, symtab, line>:
New methods.
<m_symtab, m_line>: Rename. Now private.
(get_current_source_symtab_and_line)
(set_default_source_symtab_and_line)
(set_current_source_symtab_and_line)
(clear_current_source_symtab_and_line, select_source_symtab)
(info_source_command, print_source_lines_base)
(info_line_command, search_command_helper): Update.
* observable.h (current_source_symtab_and_line_changed): Declare
observable.
* observable.c (current_source_symtab_and_line_changed): Define
observable.
Change-Id: I3c0f6b40f2df84b590bdf5b5ec5ccd8423bb7f22
This changes tui_before_prompt to take a bool rather than an int.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui-hooks.c (tui_before_prompt): Change parameter to bool.
(tui_before_prompt, tui_normal_stop): Update.
Change-Id: I9c7f2b764748fe19621851dc4fed4775a6db211a
update_source_window_as_is calls set_current_source_symtab_and_line,
but I don't think there is any reason it should be doing this. This
patch removes the call.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.c
(tui_source_window_base::update_source_window_as_is): Don't call
set_current_source_symtab_and_line.
Change-Id: I1152fc7c78150974bd3d555b8568a6f88b65dbe6
This changes set_locator_info to take a symtab_and_line, rather than
the individual components.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui-stack.h (struct tui_locator_window) <set_locator_info>:
Take a symtab_and_line.
* tui/tui-stack.c (tui_locator_window::set_locator_info): Take a
symtab_and_line.
(tui_show_frame_info): Update.
Change-Id: Icb58d67e6c5bdc034eede9e5bbe8c1d1e633fbb5
tui_show_frame_info calls update_exec_info after calling
erase_source_content, but there's no need to do this, as
erase_source_content already clears the exec info.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui-stack.c (tui_show_frame_info): Don't call
update_exec_info.
Change-Id: I63d658561028ac1bc0a0a2b7ac17da1b9c6134fe
I noticed that even when there's a symbol file, "tui enable" won't
show "main" by default. I think it should, and this patch fixes this.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui.c (tui_enable): Call tui_display_main.
gdb/testsuite/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* gdb.tui/list.exp: Check for source on initial listing.
Change-Id: Ic7bfc930e1179f5b61111e30a2dae46a98b00064
tui_get_begin_asm_address looks for the inferior's "main" to display
it. I think this is incorrect in two ways.
First, it should probably instead use the user's most recent source
context, if one has been set.
Second, it uses a hard-coded list of "main" names, but gdb already has
a better approach to handling this.
This patch fixes both of these problems.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui-disasm.c (tui_get_begin_asm_address): Use
get_current_source_symtab_and_line, and main_name.
Change-Id: I77dc13d49148e8dec5aa3eeb357ce3968a68d0bd
This changes tui_update_source_windows_with_line to take a
symtab_and_line, rather than separate parameters, and then updates the
caller.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui.c (tui_show_source): Update.
* tui/tui-winsource.h (tui_update_source_windows_with_line): Update.
* tui/tui-winsource.c (tui_update_source_windows_with_line): Take
a symtab_symbol_info, not a separate symtab and line. Simplify.
Change-Id: I8803a0a6fd2938ceee859aea53a57ce582f3e80d
After the previous changes, tui_update_source_windows_with_addr simply
updates each source-like window separately, passing the same data to
each. So, it can be simplified by using a loop instead.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.c (tui_update_source_windows_with_addr):
Simplify.
Change-Id: Id2ba6b3145ec005dbed1b1115118bd1ef4efb842
This changes a few TUI source window methods to take a symtab_and_line
rather than separate symtab and tui_line_or_address parameters. A
symtab_and_line already incorporates the same information, so this
seemed simpler. Also, it helps avoid the problem that the source and
disassembly windows need different information -- both forms are
present in the SAL.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.h (struct tui_source_window_base)
<set_contents, update_source_window_as_is, update_source_window>:
Take a sal, not a separate symtab and tui_line_or_address.
* tui/tui-winsource.c (tui_source_window_base::update_source_window)
(tui_source_window_base::update_source_window_as_is): Take a sal,
not a separate symtab and tui_line_or_address.
(tui_update_source_windows_with_addr)
(tui_update_source_windows_with_line)
(tui_source_window_base::rerender)
(tui_source_window_base::refill): Update.
* tui/tui-source.h (struct tui_source_window) <set_contents>: Take
a sal, not a separate symtab and tui_line_or_address.
* tui/tui-source.c (tui_source_window::set_contents): Take a sal,
not a separate symtab and tui_line_or_address.
(tui_source_window::maybe_update): Update.
* tui/tui-disasm.h (struct tui_disasm_window) <set_contents>: Take
a sal, not a separate symtab and tui_line_or_address.
* tui/tui-disasm.c (tui_disasm_window::set_contents): Take a sal,
not a separate symtab and tui_line_or_address.
(tui_disasm_window::do_scroll_vertical)
(tui_disasm_window::maybe_update): Update.
Change-Id: I6974a03589930a0f910c657ef50b7f6f7397c87d
A few spots in the TUI source and disassembly windows referred to
content[0], where start_line_or_addr is equivalent. This patch makes
this substitution.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.c (tui_source_window_base::refill): Use
start_line_or_addr.
* tui/tui-source.c (tui_source_window::do_scroll_vertical): Use
start_line_or_addr.
* tui/tui-disasm.c (tui_disasm_window::do_scroll_vertical): Use
start_line_or_addr.
Change-Id: I1fa807321cd7ad88b3cc5e41cc50f4d4e2d46271
This changes tui_source_window_base::set_contents to return bool,
rather than tui_status. It also changes one implementation of
set_contents to use early returns rather than a variable, which IMO
makes it easier to follow.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.h (struct tui_source_window_base)
<set_contents>: Return bool.
* tui/tui-winsource.c
(tui_source_window_base::update_source_window_as_is): Update.
* tui/tui-source.h (struct tui_source_window) <set_contents>:
Return bool.
* tui/tui-source.c (tui_source_window::set_contents): Return
bool. Simplify.
* tui/tui-disasm.h (struct tui_disasm_window) <set_contents>:
Return bool.
* tui/tui-disasm.c (tui_disasm_window::set_contents): Return
bool.
Change-Id: I8c5212400cd7aadf35760c22d5344cd3b9435674
tui_show_disassem is just a wrapper for the update_source_window
method, and it only has a single caller. This removes the function
and inlines the logic into that caller.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.c (tui_update_source_windows_with_addr): Call
update_source_window directly.
* tui/tui-disasm.h (tui_show_disassem): Don't declare.
* tui/tui-disasm.c (tui_show_disassem): Remove.
Change-Id: I7ae7a3309f64a4a949c07a80c46e1664c7f12913
A couple of lower-level utility functions can change the TUI focus.
This seems incorrect to me -- focus switches should only be done
either by explicit user request, or ass a side effect of changing the
layout.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.c
(tui_source_window_base::update_source_window_as_is): Don't switch focus.
* tui/tui-disasm.c (tui_show_disassem): Don't switch focus.
Change-Id: I0a5bb8a407cf8d52e2fd23b0598eb9bce56b1251
tui_source_window_base::maybe_update takes a symtab_and_line, plus a
separate line number and PC. Because a symtab_and_line already holds
a line number and a PC, it is possible to remove these extra
parameters.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.h (struct tui_source_window_base)
<maybe_update>: Remove line_no and addr parameters.
* tui/tui-stack.c (tui_show_frame_info): Set PC on sal. Update.
* tui/tui-source.h (struct tui_source_window) <maybe_update>:
Update.
* tui/tui-source.c (tui_source_window::maybe_update): Remove
line_no and addr parameters.
* tui/tui-disasm.h (struct tui_disasm_window) <maybe_update>:
Update.
* tui/tui-disasm.c (tui_disasm_window::maybe_update): Remove
line_no and addr parameters.
Change-Id: I33d8e1a669a179544edb4197f5f7c5429dfc368e
This removes a few asserts from the TUI. These asserts aren't useful,
because they simply check an invariant that's already ensured by the
type system.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.c (tui_source_window_base::set_is_exec_point_at)
(tui_source_window_base::update_breakpoint_info): Remove asserts.
Change-Id: I807e1e9bdb0cfa475e70375ceca3a5d4f2eb8d0b
tui_show_disassem_and_update_source only has a single caller. This
patch simplifies that caller, by having it call tui_show_disassem, and
then removes tui_show_disassem_and_update_source.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.c (tui_update_source_windows_with_addr): Call
tui_show_disassem.
* tui/tui-disasm.h (tui_show_disassem_and_update_source): Don't
declare.
* tui/tui-disasm.c (tui_show_disassem_and_update_source): Remove.
Change-Id: I7554eca8e259f3539ea7710f2ff369b4a630dd9d
tui_show_source does not need its parameters, so this removes them.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui.h (tui_show_source): Remove parameters.
* tui/tui.c (tui_show_source): Remove parameters.
* tui/tui-out.c (tui_ui_out::do_field_string): Update.
Change-Id: I7cbcf20175b459c269549f1832d4fb844cc573db
This changes tui_update_locator_fullname to take a symtab. This
somewhat consolidates the "??" handling.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui.c (tui_show_source): Update.
* tui/tui-winsource.c (tui_display_main): Update.
* tui/tui-stack.h (tui_update_locator_fullname): Change parameter
to symtab.
* tui/tui-stack.c (tui_update_locator_fullname): Change parameter
to symtab.
* tui/tui-disasm.c (tui_show_disassem_and_update_source): Update.
Change-Id: Ic61749517b44ac68561d829ff81f16976b830dec
PR tui/23619 points out that isearch changes the prompt in the CLI gdb
(and in Bash) -- but not in the TUI. This turns out to be easily
fixed by removing tui_rl_saved_prompt and instead using the prompt
that readline computes.
This is stored in rl_display_prompt, which according to git was added
in readline 6.2.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
PR tui/23619:
* tui/tui-io.c (tui_rl_saved_prompt): Remove.
(tui_redisplay_readline): Use rl_display_prompt.
(tui_prep_terminal): Update.
Change-Id: Iae97e9776a5540bbe52c73b05e4707941d9cd11a
This ensures that empty variables and variables with spaces are handled
correctly.
Code was inconsistent on whether the constant string (e.g. yes/no)
should also be quoted; I tried to be consistent with surrounding code.
This fixes the error Eli reported during configure with mingw (though that
was not fatal).
gdb/ChangeLog:
2019-12-19 Christian Biesinger <cbiesinger@google.com>
* configure: Regenerate.
* configure.ac: Quote variable arguments of test.
* gdbsupport/common.m4: Likewise.
gdb/gdbserver/ChangeLog:
2019-12-19 Christian Biesinger <cbiesinger@google.com>
* configure: Regenerate.
* configure.ac: Quote variable arguments of test.
Change-Id: I220e78b52c7db88b9dd058eda604635b03464fac
Since pow takes doubles, pass 2.0 instead of 2 to pow ().
Conveniently, this fixes the ambiguous call to pow on Solaris 11
with gcc 5.5 (gcc211 on the compile farm), which has a "using std::pow"
directive in a system header, which brings in float/double/long double
overloads. Fixes the build on Solaris with enable-targets=all.
gdb/ChangeLog:
2019-12-19 Christian Biesinger <cbiesinger@google.com>
* score-tdep.c (score7_analyze_prologue): Pass 2.0 instead of
2 to pow ().
Change-Id: Ib18e7e4749ddcbff0727b72a31198f8cb84d1993
On Solaris 11 with gcc 5.5.0 (gcc211 on the compile farm), math.h has a
using std::log10; directive. This is unfortunate because std::log10 has
overloads for float/double/long double. To disambiguate this call,
cast the argument to double to fix the build.
gdb/ChangeLog:
2019-12-19 Christian Biesinger <cbiesinger@google.com>
* tui/tui-source.c (tui_source_window::set_contents): Cast argument of
log10 to double to fix Solaris 11 with gcc 5.5.
Change-Id: I6c0c52e9c172b529c899a435d430e5916aeef69f
A Solaris system header has a #define for "sun". This renames
that variable to avoid the conflict, fixing a build error with
--enable-targets=all on Solaris.
gdb/ChangeLog:
2019-12-19 Christian Biesinger <cbiesinger@google.com>
* fbsd-tdep.c (fbsd_info_proc_files_entry): Rename local var
"sun" to "saddr_un".
Change-Id: I07a5cd801db1e28ccab8a473ebad74d7afe017c2
Christian pointed out that the new comment in field_kind is
un-grammatical. This fixes it.
gdb/ChangeLog
2019-12-19 Tom Tromey <tromey@adacore.com>
* ui-out.h (enum class field_kind): Fix comment.
Change-Id: I6608ff18e29f1af98a0ff77012afe28b3d4602f4
xml-support.c uses FOPEN_RT, but then reads the entire contents of the
file and verifies that the number of bytes read matches the length.
This can fail on Windows, where the read will translate line
terminators.
This patch fixes the bug by changing xml-support.c to use FOPEN_RB.
This works because expat correctly handles \r\n line terminators.
gdb/ChangeLog
2019-12-11 Tom Tromey <tromey@adacore.com>
* xml-support.c (xml_fetch_content_from_file): Use FOPEN_RB.
gdb/testsuite/ChangeLog
2019-12-11 Tom Tromey <tromey@adacore.com>
* gdb.xml/tdesc-arch.exp (set_arch): Add "trans_mode" parameter.
Add crlf test.
Change-Id: I548438f33eed284dde1de8babf755eaa1a40319d
My earlier patch to fix the pthread_setname_np build error on macOS
was incorrect. While the macOS man page claims that
pthread_setname_np returns void, in <pthread.h> it is actually
declared returning "int". I knew this earlier, but must have made
some mistake when preparing the patch for submission (perhaps when
removing the templates?).
This patch re-fixes the bug. I'm also applying it to the 9.1 branch.
Tested by building on macOS High Sierra.
gdb/ChangeLog
2019-12-18 Tom Tromey <tromey@adacore.com>
PR build/25268:
* gdbsupport/thread-pool.c (set_thread_name): Expect "int" return
type on macOS. Add comment.
Change-Id: Ib09da6ac33958a0d843f65df2a528112356e7de6
I see this warning when building with clang:
CXX c-lang.o
/home/smarchi/src/binutils-gdb/gdb/c-lang.c:314:7: error: misleading indentation; statement is not part of the previous 'if' [-Werror,-Wmisleading-indentation]
*length = i * width;
^
/home/smarchi/src/binutils-gdb/gdb/c-lang.c:308:4: note: previous statement is here
if (extract_unsigned_integer (contents + i * width,
^
It took me a while to notice that some lines in that area have a
spurious space before the tabs, at the beginning of the ling. I'm not
sure how clang translates that to misleading indentation, but making the
indentation correct gets rid of the error.
There are many more instances of this in the code base (`grep -P '^ \t'
*.c`), if others think it's a good idea, it would be pretty easy to fix
them all up in one shot.
gdb/ChangeLog:
* c-lang.c (c_get_string, asm_language_defn): Remove space
before tab.
PR build/25250 notes that the gdb 9 pre-release fails to build on
macOS, due to a name clash between field_kind::STRING and the STRING
token in ada-exp.y. I am not sure (I couldn't reproduce this myself),
but presumably this is due to differences caused by the version of
bison in use there.
This patch works around the problem by renaming the field_kind
enumerator. I chose to rename this one because it is used in
relatively few places -- it's just an implementation detail of the
style code.
This version also renames field_kind::SIGNED for consistency.
Let me know what you think. I intend to check this in on the gdb 9
branch as well.
gdb/ChangeLog
2019-12-18 Tom Tromey <tromey@adacore.com>
PR build/25250:
* ui-out.c (ui_out::vmessage): Update.
* ui-out.h (enum class field_kind) <FIELD_STRING, FIELD_SIGNED>:
Rename.
(string_field): Update.
(signed_field): Update.
Change-Id: Iae9f36f1b793e22c61fee0de2ab2d508668ee7e4
When building top.c with this clang (daily build from apt.llvm.org):
$ clang++-10 --version
clang version 10.0.0-+20191211091425+f99297176cd-1~exp1~20191211082036.1372
I get:
/home/smarchi/src/binutils-gdb/gdb/top.c:1549:5: error: misleading indentation; statement is not part of the previous 'if' [-Werror,-Wmisleading-indentation]
fprintf_filtered (stream, _("\n\
^
/home/smarchi/src/binutils-gdb/gdb/top.c:1543:3: note: previous statement is here
if (SYSTEM_GDBINIT_DIR[0])
^
This looks like a legitimate warning, the fprintf_filtered is too much
indented. Fix it, and at the same time add a bit of whitespace to make
this function easier to read.
gdb/ChangeLog:
* top.c (print_gdb_configuration): Adjust indentation.
Commit ff8577f649 added a call to
gdb_abspath in bsd-kvm.c, but doesn't include its header file.
This commit fixes that.
gdb/ChangeLog:
2019-12-17 Christian Biesinger <cbiesinger@google.com>
* bsd-kvm.c: Include gdbsupport/pathstuff.h.
Change-Id: I647c3620d8ae978ae27c38dbe0b3347a97c5bfc2
I stumbled on some ASan failures when using the TUI, when tearing down a
TUI layout. The simplest way to trigger it is to run:
$ ./gdb --data-directory=data-directory -batch -ex "layout next"
The ASan report is:
=================================================================
==2829136==ERROR: AddressSanitizer: new-delete-type-mismatch on 0x608000009a20 in thread T0:
object passed to delete has wrong type:
size of the allocated type: 88 bytes;
size of the deallocated type: 24 bytes.
#0 0x7f470fe2507e in operator delete(void*, unsigned long) /build/gcc/src/gcc/libsanitizer/asan/asan_new_delete.cc:177
#1 0x55f88c75700d in std::default_delete<tui_layout_base>::operator()(tui_layout_base*) const /usr/include/c++/9.2.0/bits/unique_ptr.h:81
#2 0x55f88c756328 in std::unique_ptr<tui_layout_base, std::default_delete<tui_layout_base> >::~unique_ptr() /usr/include/c++/9.2.0/bits/unique_ptr.h:284
#3 0x7f470ee536a6 in __run_exit_handlers (/usr/lib/libc.so.6+0x3e6a6)
#4 0x7f470ee5385d in __GI_exit (/usr/lib/libc.so.6+0x3e85d)
#5 0x55f88c69f2ac in quit_force(int*, int) /home/simark/src/binutils-gdb/gdb/top.c:1766
#6 0x55f88becc29a in captured_main_1 /home/simark/src/binutils-gdb/gdb/main.c:1183
#7 0x55f88becc814 in captured_main /home/simark/src/binutils-gdb/gdb/main.c:1192
#8 0x55f88becc8a9 in gdb_main(captured_main_args*) /home/simark/src/binutils-gdb/gdb/main.c:1217
#9 0x55f88b3159cd in main /home/simark/src/binutils-gdb/gdb/gdb.c:32
#10 0x7f470ee3c152 in __libc_start_main (/usr/lib/libc.so.6+0x27152)
#11 0x55f88b31579d in _start (/home/simark/build/binutils-gdb/gdb/gdb+0x11fb79d)
0x608000009a20 is located 0 bytes inside of 88-byte region [0x608000009a20,0x608000009a78)
allocated by thread T0 here:
#0 0x7f470fe238f8 in operator new(unsigned long) /build/gcc/src/gcc/libsanitizer/asan/asan_new_delete.cc:104
#1 0x55f88c750906 in tui_layout_split::clone() const /home/simark/src/binutils-gdb/gdb/tui/tui-layout.c:515
#2 0x55f88c74e60e in show_layout /home/simark/src/binutils-gdb/gdb/tui/tui-layout.c:90
#3 0x55f88c74e7db in tui_set_layout(tui_layout_type) /home/simark/src/binutils-gdb/gdb/tui/tui-layout.c:116
#4 0x55f88c782f4f in tui_enable() /home/simark/src/binutils-gdb/gdb/tui/tui.c:481
#5 0x55f88c74eeb2 in tui_layout_command /home/simark/src/binutils-gdb/gdb/tui/tui-layout.c:286
#6 0x55f88b6f969b in do_const_cfunc /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:107
#7 0x55f88b701859 in cmd_func(cmd_list_element*, char const*, int) /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:1952
#8 0x55f88c69b455 in execute_command(char const*, int) /home/simark/src/binutils-gdb/gdb/top.c:652
#9 0x55f88bec9026 in catch_command_errors /home/simark/src/binutils-gdb/gdb/main.c:400
#10 0x55f88becc1f2 in captured_main_1 /home/simark/src/binutils-gdb/gdb/main.c:1167
#11 0x55f88becc814 in captured_main /home/simark/src/binutils-gdb/gdb/main.c:1192
#12 0x55f88becc8a9 in gdb_main(captured_main_args*) /home/simark/src/binutils-gdb/gdb/main.c:1217
#13 0x55f88b3159cd in main /home/simark/src/binutils-gdb/gdb/gdb.c:32
#14 0x7f470ee3c152 in __libc_start_main (/usr/lib/libc.so.6+0x27152)
The problem is that the tui_layout_base is missing a virtual destructor.
We allocate a derived object (tui_layout_split), but delete it through a
tui_layout_base pointer. Since the tui_layout_base destructor is not
virtual, the derived (tui_layout_split) destructor is not called, only
the base destructor.
That code is not in gdb-9-branch, so I don't think this patch is
relevant for the stable branch.
Note that this is caught as a diagnostic with clang:
In file included from /home/simark/src/binutils-gdb/gdb/tui/tui-layout.c:22:
In file included from /home/simark/src/binutils-gdb/gdb/defs.h:28:
In file included from /home/simark/src/binutils-gdb/gdb/gdbsupport/common-defs.h:133:
In file included from /home/simark/src/binutils-gdb/gdb/gdbsupport/common-exceptions.h:25:
In file included from /usr/bin/../lib64/gcc/x86_64-pc-linux-gnu/9.2.0/../../../../include/c++/9.2.0/memory:80:
/usr/bin/../lib64/gcc/x86_64-pc-linux-gnu/9.2.0/../../../../include/c++/9.2.0/bits/unique_ptr.h:81:2: error: delete called on 'tui_layout_base' that is abstract but has non-virtual destructor [-Werror,-Wdelete-abstract-non-virtual-dtor]
delete __ptr;
^
/usr/bin/../lib64/gcc/x86_64-pc-linux-gnu/9.2.0/../../../../include/c++/9.2.0/bits/unique_ptr.h:284:4: note: in instantiation of member function 'std::default_delete<tui_layout_base>::operator()' requested here
get_deleter()(std::move(__ptr));
^
/home/simark/src/binutils-gdb/gdb/tui/tui-layout.c:54:41: note: in instantiation of member function 'std::unique_ptr<tui_layout_base, std::default_delete<tui_layout_base> >::~unique_ptr' requested here
static std::unique_ptr<tui_layout_base> applied_layout;
^
1 error generated.
GCC has the similar -Wdelete-non-virtual-dtor, enabled by -Wall, but it
doesn't show up because warnings are inhibited for system headers, where
std::unique_ptr is defined. There is a bug about it here:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58876
gdb/ChangeLog:
* tui/tui-layout.h (class tui_layout_base): Add virtual
destructor.
This makes the skip command work in optimized builds, where skipped
functions may be inlined. Previously that was only working when
stepping into a non-inlined function.
This patch changes the gdb_symtab::blocks manually maintained linked
list to be an std::forward_list, simplifying memory management.
Currently, the list is sorted as blocks are created. With an
std::forward_list, it is easier (and probably a bit more efficient) to
sort them once at the end, so this is what I did.
A note about the comment on the "next" field:
/* gdb_blocks are linked into a tree structure. Next points to the
next node at the same depth as this block and parent to the
parent gdb_block. */
I don't think it's true that "next" points to the next node at the same
depth. All nodes are in a simple singly linked list, so necessarily
some node will point to some other node that isn't at the same depth.
gdb/ChangeLog:
* jit.c (struct gdb_block) <next>: Remove field.
(struct gdb_symtab) <~gdb_symtab>: Remove.
<blocks>: Change type to std::forward_list<gdb_block>.
(compare_block): Remove.
(jit_block_open_impl): Adjust to std::forward_list. Place the new
block at the beginning, don't mind about sorting.
(finalize_symtab): Adjust to std::forward_list, sort the blocks list
before using it.
Add a constructor to gdb_block, change the name field to be a
gdb::unique_xmalloc_ptr. This is in preparation for using an
std::forward_list<gdb_block> in the next patch.
gdb/ChangeLog:
* jit.c (struct gdb_block): Add constructor, initialize
real_block and next fields.
<name>: Change type to gdb::unique_xmalloc_ptr.
(struct gdb_symtab) <~gdb_symtab>: Free blocks with delete.
(jit_block_open_impl): Allocate gdb_block with new.
(finalize_symtab): Adjust to gdb::unique_xmalloc_ptr.
Replace the manual linked list with an std::forward_list, simplifying
the memory management. This requires allocating gdb_object with new and
free'ing it with delete.
gdb/ChangeLog:
* jit.c: Include forward_list.
(struct gdb_symtab) <next>: Remove field.
(struct gdb_object) <symtabs>: Change type to
std::forward_list<gdb_symtab>.
(jit_object_open_impl): Allocate gdb_object with new.
(jit_symtab_open_impl): Adjust to std::forward_list.
(finalize_symtab): Don't delete symtab.
(jit_object_close_impl): Adjust to std::forward_list. Free
gdb_object with delete.
This patch makes the gdb_symtab bit more c++y, in preparation for the
next patch that will use an std::forward_list<gdb_symtab>. It changes
the fields to use automatic memory management, in the form of
std::string and gdb::unique_xmalloc_ptr, and adds a constructor and a
destructor.
gdb/ChangeLog:
* jit.c (struct gdb_symtab): Add constructor, destructor,
initialize fields.
<linetable>: Change type to unique_xmalloc_ptr.
<file_name>: Change type to std::string.
(jit_symtab_open_impl): Allocate gdb_symtab with new.
(jit_symtab_line_mapping_add_impl): Adjust.
(finalize_symtab): Adjust, call delete on stab.
A double-free happens when using a JIT debug info reader that creates
more than one block. In the loop that frees blocks in finalize_symtab,
at the very end, the gdb_block_iter_tmp variable is set initially, but
not changed as the loop advances. If we have two blocks, the first
iteration frees the first block, the second iteration frees the second
block, but the third iteration tries to free the second block again, as
gdb_block_iter_tmp keeps pointing on the second block.
Fix it by assigning the gdb_block_iter_tmp variable in the loop.
I have improved the jit-reader.exp test to cover this case, by adding a
second "JIT-ed" function and creating a block for it. I have renamed
the existing function to something I find a bit more descriptive. There
are no significant changes to jit-reader.exp itself, only updates
following the renaming. The important changes are in jithost.c
(generate a new function) and in jitreader.c (create a gdb_block for
that function).
This was found because of an ASan report:
$ ./gdb testsuite/outputs/gdb.base/jit-reader/jit-reader -ex "jit-reader-load /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/jit-reader/jitreader.so" -ex r
Reading symbols from testsuite/outputs/gdb.base/jit-reader/jit-reader...
Starting program: /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/jit-reader/jit-reader
=================================================================
==1751048==ERROR: AddressSanitizer: heap-use-after-free on address 0x604000042eb8 at pc 0x5650ef8eec88 bp 0x7ffe52767290 sp 0x7ffe52767280
READ of size 8 at 0x604000042eb8 thread T0
#0 0x5650ef8eec87 in finalize_symtab /home/simark/src/binutils-gdb/gdb/jit.c:768
#1 0x5650ef8eef88 in jit_object_close_impl /home/simark/src/binutils-gdb/gdb/jit.c:797
#2 0x7fbbda986278 in read_debug_info /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jitreader.c:71
#3 0x5650ef8ef56b in jit_reader_try_read_symtab /home/simark/src/binutils-gdb/gdb/jit.c:850
#4 0x5650ef8effe3 in jit_register_code /home/simark/src/binutils-gdb/gdb/jit.c:948
#5 0x5650ef8f2c92 in jit_event_handler(gdbarch*) /home/simark/src/binutils-gdb/gdb/jit.c:1396
#6 0x5650ef0d137e in handle_jit_event /home/simark/src/binutils-gdb/gdb/breakpoint.c:5470
[snip]
0x604000042eb8 is located 40 bytes inside of 48-byte region [0x604000042e90,0x604000042ec0)
freed by thread T0 here:
#0 0x7fbbe57376b0 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:122
#1 0x5650ef8f350b in xfree<gdb_block> /home/simark/src/binutils-gdb/gdb/gdbsupport/common-utils.h:62
#2 0x5650ef8eeca9 in finalize_symtab /home/simark/src/binutils-gdb/gdb/jit.c:769
#3 0x5650ef8eef88 in jit_object_close_impl /home/simark/src/binutils-gdb/gdb/jit.c:797
#4 0x7fbbda986278 in read_debug_info /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jitreader.c:71
#5 0x5650ef8ef56b in jit_reader_try_read_symtab /home/simark/src/binutils-gdb/gdb/jit.c:850
#6 0x5650ef8effe3 in jit_register_code /home/simark/src/binutils-gdb/gdb/jit.c:948
#7 0x5650ef8f2c92 in jit_event_handler(gdbarch*) /home/simark/src/binutils-gdb/gdb/jit.c:1396
#8 0x5650ef0d137e in handle_jit_event /home/simark/src/binutils-gdb/gdb/breakpoint.c:5470
[snip]
previously allocated by thread T0 here:
#0 0x7fbbe5737cd8 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:153
#1 0x5650eef662f3 in xcalloc /home/simark/src/binutils-gdb/gdb/alloc.c:100
#2 0x5650ef8f34ea in xcnew<gdb_block> /home/simark/src/binutils-gdb/gdb/gdbsupport/poison.h:122
#3 0x5650ef8ed467 in jit_block_open_impl /home/simark/src/binutils-gdb/gdb/jit.c:557
#4 0x7fbbda98620a in read_debug_info /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jitreader.c:60
#5 0x5650ef8ef56b in jit_reader_try_read_symtab /home/simark/src/binutils-gdb/gdb/jit.c:850
#6 0x5650ef8effe3 in jit_register_code /home/simark/src/binutils-gdb/gdb/jit.c:948
#7 0x5650ef8f2c92 in jit_event_handler(gdbarch*) /home/simark/src/binutils-gdb/gdb/jit.c:1396
#8 0x5650ef0d137e in handle_jit_event /home/simark/src/binutils-gdb/gdb/breakpoint.c:5470
[snip]
gdb/ChangeLog:
* jit.c (finalize_symtab): Set gdb_block_iter_tmp in loop.
gdb/testsuite/ChangeLog:
* gdb.base/jit-reader.exp (jit_reader_test): Rename
jit_function_00 to jit_function_stack_mangle.
* gdb.base/jithost.c (jit_function_t): Rename to...
(jit_function_stack_mangle_t): ... this.
(jit_function_add_t): New typedef.
(jit_function_00_code): Rename to...
(jit_function_stack_mangle_code): ... this, make static.
(jit_function_add_code): New.
(main): Generate "add" function and call it. Adjust to changes
in jithost_abi.
* gdb.base/jithost.h (struct jithost_abi_bounds): New.
(struct jithost_abi) <begin, end>: Remove fields.
<object, function_stack_mangle, function_add>: New fields.
* gdb.base/jitreader.c (struct reader_state) <code_begin,
code_end>: Remove fields.
<func_stack_mangle>: New field.
(read_debug_info): Adjust to renaming, create block for "add"
function.
(read_sp, unwind_frame, get_frame_id): Adjust to other changes.
I noticed that get_exec_file could return a "const char *". This
patch implements this change.
I couldn't build all the code -- but I did build Linux native and a
mingw cross.
Consequently, the NTO code has a hack, where it casts away const. I
think this can be removed, but that required more work there, and
since I couldn't compile it, I felt it best not to try.
Let me know what you think.
gdb/ChangeLog
2019-12-16 Tom Tromey <tromey@adacore.com>
* windows-nat.c (windows_nat_target::attach): Update.
* remote.c (extended_remote_target::attach): Update.
* procfs.c (procfs_target::attach): Update.
* nto-procfs.c (nto_procfs_target::attach): Update.
(nto_procfs_target::create_inferior): Update.
* inf-ptrace.c (inf_ptrace_target::attach): Update.
* gnu-nat.c (gnu_nat_target::attach): Update.
(gnu_nat_target::detach): Update.
* darwin-nat.c (darwin_nat_target::attach): Update.
* corefile.c (get_exec_file): Constify result. Remove extraneous
return.
* bsd-kvm.c (bsd_kvm_target_open): Update.
* gdbsupport/common-inferior.h (get_exec_file): Constify result.
gdb/gdbserver/ChangeLog
2019-12-16 Tom Tromey <tromey@adacore.com>
* server.c (get_exec_file): Constify result.
Change-Id: I29c60f7313a7def0dcb290ff0c2a4c1dea4f981f
This removes symbol_set_language and SYMBOL_SET_LANGUAGE in favor of
a new function general_symbol_info::set_language. symbol and minimal_symbol
already inherit from that struct so this works naturally.
gdb/ChangeLog:
2019-12-15 Christian Biesinger <cbiesinger@google.com>
* ada-exp.y (write_ambiguous_var): Update.
* coffread.c (process_coff_symbol): Update.
* ctfread.c (ctf_add_enum_member_cb): Update.
(new_symbol): Update.
* dwarf2read.c (fixup_go_packaging): Update.
(new_symbol): Update.
* language.c (language_alloc_type_symbol): Update.
* mdebugread.c (new_symbol): Update.
* minsyms.c (minimal_symbol_reader::record_full): Update.
* psymtab.c (add_psymbol_to_bcache): Update.
* stabsread.c (define_symbol): Update.
(read_enum_type): Update.
* symtab.c (symbol_set_language): Make this a member function...
(general_symbol_info::set_language): ... here.
* symtab.h (struct general_symbol_info) <set_language>: New function.
(SYMBOL_SET_LANGUAGE): Remove.
(symbol_set_language): Remove.
Change-Id: Ideafb6c384004b9adef793a1192735c501da41d5
Instead of using SYMBOL_LANGUAGE (sym) = foo.
Having only a single way to set a symbol's language is clearer and this
is also a requirement for making set_language a member function.
gdb/ChangeLog:
2019-12-15 Christian Biesinger <cbiesinger@google.com>
* ada-exp.y (write_ambiguous_var): Call symbol_set_language to
set the language of sym.
* language.c (language_alloc_type_symbol): Likewise.
Change-Id: I85338ea2e4121155f2da222fe0aa6b7d3ffe26f7
Ref.: https://bugzilla.redhat.com/show_bug.cgi?id=1728147
Ref.: https://sourceware.org/bugzilla/show_bug.cgi?id=23613
Hi,
This bug has been reported against Fedora GDB, but there's also an
upstream bug. The problem reported is that GDB segfaults when the
working directory is deleted. It's pretty use to reproduce it:
mkdir bla
cd bla
rmdir ../bla
gdb echo
Debugging the problem is a bit tricky, because, since the current
directory doesn't exist anymore, a corefile cannot be saved there.
After a few attempts, I came up with the following:
gdb -ex 'shell mkdir bla' -ex 'cd bla' -ex 'shell rmdir ../bla' -ex 'r echo' ./gdb/gdb
This assumes that you're inside a build directory which contains
./gdb/gdb, of course.
After investigating it, I found that the problem happens at
gdb_abspath, where we're dereferencing 'current_directory' without
checking if it's NULL:
...
(concat (current_directory,
IS_DIR_SEPARATOR (current_directory[strlen (current_directory) - 1])
? "" : SLASH_STRING,
...
So I fixed the problem with the patch below. The idea is that, if
'current_directory' is NULL, then the final string returned should be
just the "path".
After fixing the bug, I found a similar one reported against our
bugzilla: PR gdb/23613. The problem is the same, but the reproducer
is a bit different.
I really tried writing a testcase for this, but unfortunately it's
apparently not possible to start GDB inside a non-existent directory
with DejaGNU.
I regression tested this patch on the BuildBot, and no regressions
were found.
gdb/ChangeLog:
2019-12-14 Sergio Durigan Junior <sergiodj@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1728147
PR gdb/23613
* bsd-kvm.c (bsd_kvm_target_open): Use 'gdb_abspath'.
* corelow.c: Include 'gdbsupport/pathstuff.h'.
(core_target_open): Use 'gdb_abspath'.
* gdbsupport/pathstuff.c (gdb_abspath): Guard against
'current_directory == NULL' case.
* gdbsupport/pathstuff.h (gdb_abspath): Expand comment and
explain what happens when 'current_directory' is NULL.
* go32-nat.c (go32_nat_target::wait): Check if
'current_directory' is NULL before call to 'chdir'.
* source.c (add_path): Use 'gdb_abspath'.
* top.c: Include 'gdbsupport/pathstuff.h'.
(init_history): Use 'gdb_abspath'.
(set_history_filename): Likewise.
* tracefile-tfile.c: Include 'gdbsupport/pathstuff.h'.
(tfile_target_open): Use 'gdb_abspath'.
Change-Id: Ibb0932fa25bc5c2d3ae4a7f64bd7f32885ca403b
ARI has a check for multiple calls to warning or error, suggesting
that they be combined into a single call. This triggers at three
places in gdb -- throw_bad_regnum_error, guile_repl_command, and the
end of value_cast -- and after examining these, I think they all make
sense as-is. Instead, it makes sense to remove this check from ARI.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove check for multiple calls to
warning or error.
Change-Id: I0618683623a3c7324460c7b9e5d7f252d88c2e8d
ARI has a "fix" call for "long long", but this call is incorrect.
This patch removes it.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove call to "fix" for "long long".
Change-Id: I97bca2dc04b579fcf7c9dba7fe7fd939451bcefa
This adds -Wno- support to ARI, so that warnings can be disabled
selectively. I use this to ignore "deprecated" warnings.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Handle -Wno- prefix.
Change-Id: I6919faedf920e857df4f597df66f0ba3943e0eac
This changes the ARI usage text to use the GNU style for
"metasyntactic variables".
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh (usage): Use GNU style.
Change-Id: Ibe5a867571382d2985d1b8b78dfef3ddd02291ff
A few spots can validly call vsprintf; this adds ARI markers to
suppress warnings at these places.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* gdbsupport/common-utils.c (string_printf, string_vprintf)
(string_vappendf): Add ARI comment.
Change-Id: Ia8665aa5d7b7331a3985b18626b19764a264447b
This silences ARI at the one spot that is permitted to call
floatformat_to_double, and also removes the corresponding "fix" call
from gdb_ari.sh -- it was incorrect, and now is not needed.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove "fix" call for
floatformat_to_double.
* target-float.c (host_float_ops<T>::from_target): Add ARI
comment.
Change-Id: I778a17a04da417c113194004dd7de3b1df381266
There are a handful of spots in gdb that validly call abort. This
patch adds the appropriate ARI marker to these lines, to silence the
ARI report. This also removes the "fix" call for "abort" from
gdb_ari.sh; it was incorrect and now is not needed.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove "fix" call for abort.
* utils.c (abort_with_message, dump_core, internal_vproblem): Add
ARI marker to abort.
* event-top.c (handle_sigsegv): Add ARI marker to abort.
Change-Id: I09ce6aa5010bbe4e5bb73ffdb727481be39d34d6
ARI reports the wrong substitution for floatformat_from_double.
"floatformat_from_doublest" was renamed in 2017.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Fix floatformat_from_double text.
Change-Id: Ibf1b194ea509b12ae8bc30ce285c809c96218557
The text for the ATTRIBUTE_UNUSED check in ARI is plainly incorrect
now -- gdb does in fact use ATTRIBUTE_UNUSED, and there's no issue in
doing so, when done properly.
This patch removes this check.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove ATTRIBUTE_UNUSED check.
Change-Id: I13fd8e9b40dbaab3978dbf9b6c4228b62299d944
The "boolean" and "var_boolean" checks from ARI seem only to generate
false reports.
Now that gdb is in C++, at least the "boolean" check seems unlikely to
ever generate a true report.
The "var_boolean" check likewise doesn't seem valuable any more --
presumably this refers to some ancient way of doing things in gdb, and
isn't likely to find a bug in the future.
Therefore, this patch removes these two checks.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove "boolean" and "var_boolean"
checks.
Change-Id: Iaf449b51e8182ffa0b9ed25fe688e0ff64a07a67
The Solaris buildbot builder complained about some recent patches of
mine. Building with GCC 7 failed.
This patch fixes the bug. I'm checking it in.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* gdbsupport/safe-iterator.h (class basic_safe_range) <begin,
end>: No longer "const".
Change-Id: I5f428fab61087f467ac3b6475f4ef4dbd314fcb0
Many places in this file use spaces only for indentation. Fix them to
conform to GNU style.
gdb/ChangeLog:
* jit.c: Fix indentation, replace spaces with tabs where
applicable.
This enables support for the msp430-elfbare target being added to GCC.
gdb/ChangeLog:
2019-12-13 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* configure.tgt: Match msp430-*-elf* targets when configuring GDB.
A plan I had a while ago was to write the DWARF index in a worker
thread. This is why objfile::partial_symtabs is a shared_ptr.
However, it turned out that doing this required keeping the objfile
alive as well. Now that objfiles are managed using shared_ptr,
there's no need for partial_symtabs to be one as well, so this patch
reverts that change.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* objfiles.h (struct objfile) <partial_symtabs>: Now a
unique_ptr.
Change-Id: I3d7831006c40d4c8f3173ba51c0c1b0a32021ae5
This changes objfiles to be managed using a shared_ptr. shared_ptr is
chosen because it enables the use of objfiles in background threads.
The simplest way to do this was to introduce a new iterator that will
return the underlying objfile, rather than a shared_ptr. (I also
tried changing the rest of gdb to use shared_ptr, but this was quite
large; and to using intrusive reference counting, but this also was
tricky.)
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* progspace.h (objfile_list): New typedef.
(class unwrapping_objfile_iterator)
(struct unwrapping_objfile_range): Newl
(struct program_space) <objfiles_range>: Change type.
<objfiles>: Change return type.
<add_objfile>: Change type of "objfile" parameter.
<objfiles_list>: Now a list of shared_ptr.
* progspace.c (program_space::add_objfile): Change type of
"objfile". Update.
(program_space::remove_objfile): Update.
* objfiles.h (struct objfile) <~objfile>: Make public.
* objfiles.c (objfile::make): Update.
(objfile::unlink): Don't call delete.
Change-Id: I6fb7fbf06efb7cb7474c525908365863eae27eb3
This changes free_all_objfiles to be a method on program_space, in
line with the other changes to treat program_space as a container for
objfiles.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (symbol_file_clear): Update.
* progspace.h (struct program_space) <free_all_objfiles>: Declare
method.
* progspace.c (program_space::free_all_objfiles): New method.
* objfiles.h (free_all_objfiles): Don't declare.
* objfiles.c (free_all_objfiles): Move to program_space.
Change-Id: I908b549d2981b6005f7ca181fc0e6d24fc8b7b6f
This introduces the basic_safe_range class, which can be used to
create a basic_safe_iterator. This also changes basic_safe_iterator
in two ways.
First, it simplifies the constructor. This seemed unnecessarily
complicated to me, and keeping it this way would prevent the second
change...
... which is to add a second constructor for initializing the
one-past-the-end iterator that is stored in basic_safe_iterator.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* gdbsupport/safe-iterator.h (basic_safe_iterator): Simplify. Add
second constructor.
(basic_safe_range): New class.
Change-Id: Ib351ef6fd435129a5053c64e5561877e1459ab37
This removes the MULTI_OBJFILE_P macro in favor of a method on the
program space.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* progspace.c (program_space::multi_objfile_p): New method.
* printcmd.c (info_symbol_command): Update.
* maint.c (maintenance_translate_address): Update.
* objfiles.h (MULTI_OBJFILE_P): Remove.
* progspace.h (struct program_space) <multi_objfile_p>: New
method.
Change-Id: I2779e26ea8909078d63fea8f13bce94cab73948c
This introduces a new method, program_space::remove_objfile, and
changes the objfile destructor not to unlink an objfile from the
program space's list.
This is cleaner because, like the previous patch, it treats the
program space more like a container for objfiles. Also, this makes it
possible to keep an objfile alive even though it has been unlinked
from the program space's list, which is important for processing in a
worker thread.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* progspace.h (struct program_space) <remove_objfile>: Declare.
* progspace.c (program_space::remove_objfile): New method.
* objfiles.c (unlink_objfile): Remove.
(objfile::unlink): Call remove_objfile.
(objfile): Don't call unlink_objfile.
Change-Id: I22f768827723dce21886fae9b3664532c8349e68
This introduces a new method, program_space::add_objfile, that adds an
objfile to the program space's list of objfiles. It also changes the
obfile's constructor so that linking an objfile into this list is not
done here.
The former is an improvement because it makes more sense to treat the
program space as a container holding objfiles -- so manipulation of
the list belongs there.
The latter is not strictly needed, but seemed better both because it
is removing a global side effect from a constructor, and for symmetry
reasons, as a subsequent patch will remove unlinking from the
destructor.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* progspace.h (struct program_space) <add_objfile>: Declare
method.
* progspace.c (program_space::add_objfile): New method.
* objfiles.c (~objfile): Don't unlink objfile.
(put_objfile_before): Remove.
(add_separate_debug_objfile): Don't call put_objfile_before.
(objfile::make): Call add_objfile. Set new_objfiles_available on
the per-program-space data.
Change-Id: I93e8525dda631cb89dcc2046a5c51c7c9f34ccfd
The idea behind this is that, in the long run, some code will need to
be able to hold onto an objfile after it is unlinked from the program
space. In particular, this is needed for some functionality to be
moved to worker threads -- otherwise the objfile can be deleted while
still in use.
So, this makes ~objfile private, replacing it with an "unlink" method,
making it more obvious which operation is intended at the calling
points.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (syms_from_objfile_1): Use objfile_up.
(syms_from_objfile_1, remove_symbol_file_command): Call unlink
method.
(reread_symbols): Use objfile_up.
* solib.c (update_solib_list, reload_shared_libraries_1): Call
unlink method.
* objfiles.h (struct objfile) <~objfile>: Now private.
<unlink>: New method.
(struct objfile_deleter): New.
(objfile_up): New typedef.
* objfiles.c (objfile::unlink): New method.
(free_objfile_separate_debug, free_all_objfiles)
(objfile_purge_solibs): Use it.
* jit.c (jit_unregister_code): Remove.
(jit_inferior_exit_hook, jit_event_handler): Call unlink on
objfile.
* compile/compile-object-run.c (do_module_cleanup): Call unlink on
objfile.
* compile/compile-object-load.c (compile_object_load): Use
objfile_up.
Change-Id: I934bee70b26b8b24e1735828fb1e60fe8a05714f
This changes objfile::make to take a "parent" parameter, and makes
add_separate_debug_objfile static.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (symbol_file_add_with_addrs): Pass "parent" to
objfile::make.
* objfiles.h (struct objjfile) <make>: No longer inline.
(add_separate_debug_objfile): Don't declare.
* objfiles.c (add_separate_debug_objfile): Now static.
(objfile::make): Move from objfiles.h. Call
add_separate_debug_objfile. Add "parent" parameter.
Change-Id: I631f43bb71738dea6ae0697317bf8ef4a0db4617
This changes the objfile constructor to be private, changing the
callers to use a factory method. This isn't perhaps strictly needed
for the goal of this series -- changing the container model of
objfiles -- but is a nice symmetry.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (symbol_file_add_with_addrs): Use objfile::make.
* objfiles.h (struct objfile): Make constructor private.
<make>: New static method.
* jit.c (jit_object_close_impl): Update.
Change-Id: I42e07bc80a88cf3322ace94ffe869ae5788bcb29
I'm currently studying that code and noticed this manual memory
management, which could easily be replaced with a vector, so here it is.
gdb/ChangeLog:
* jit.c (jit_reader_try_read_symtab): Replace xmalloc/xfree with
gdb::byte_vector.
I noticed a couple of spots that call malloc_failure, but that don't
need to.
* In xml-support.c, "concat" uses xmalloc, so cannot return NULL.
* In utils.c, "buildargv" also uses xmalloc, so can only return NULL
if the argument is empty.
Tested by the buildbot.
gdb/ChangeLog
2019-12-12 Tom Tromey <tromey@adacore.com>
* xml-support.c (xml_fetch_content_from_file): Don't call
malloc_failure.
* utils.h (class gdb_argv): Remove malloc_failure comment.
* utils.c (gdb_argv::reset): Don't call malloc_failure.
Change-Id: I59483620deb6609ccf2f024d94a29113bb62d1a9
This adds Ravenscar support to gdb for RISC-V targets.
This was tested internally using AdaCore's test suite and qemu.
gdb/ChangeLog
2019-12-12 Tom Tromey <tromey@adacore.com>
* Makefile.in (ALL_TARGET_OBS): Add riscv-ravenscar-thread.o.
(HFILES_NO_SRCDIR): Add riscv-ravenscar-thread.h.
(ALLDEPFILES): Add riscv-ravenscar-thread.c.
* configure.tgt (riscv-*-*): Add riscv-ravenscar-thread.o.
* riscv-ravenscar-thread.c: New file.
* riscv-ravenscar-thread.h: New file.
* riscv-tdep.c (riscv_gdbarch_init): Call
register_riscv_ravenscar_ops.
Change-Id: Ic47a3b3cfbbe80c2c82a5f48d2e0481845cac8b0
A recent commit removed DIAGNOSTIC_IGNORE_UNUSED_FUNCTION, which was
used in thread-pool.c. This patch changes this code to use
ATTRIBUTE_UNUSED instead.
Tested by rebuilding.
gdb/ChangeLog
2019-12-12 Tom Tromey <tromey@adacore.com>
* gdbsupport/thread-pool.c (set_thread_name): Use
ATTRIBUTE_UNUSED.
Change-Id: I56d46eaac73690565d0e52db1791411567a918dd
Attempting to build GDB in Ubuntu 16.04.6 LTS on x86_64, I ran into warnings
that caused the build to fail:
binutils-gdb/gdb/gdbsupport/safe-strerror.c:44:1: error: ‘char* select_strerror_r(char*, char*)’ defined but not used [-Werror=unused-function] select_strerror_r (char *res, char *)
The diagnostic macro DIAGNOSTIC_IGNORE_UNUSED_FUNCTION seems to expand
correctly to its respective pragma, but this doesn't seem to have an effect on
the warning. I tried to use the pragma explicitly and got the same result.
ATTRIBUTE_UNUSED works fine in this case if you put it in both functions,
which should fix warnings for both gdb and gdbserver builds.
The compiler version is gcc (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609.
This is likely the result of PR64079 in GCC, which was fixed by commit
9e96f1e1b9731c4e1ef4fbbbf0997319973f0537.
To prevent other developers from attempting to use this macro, only to get
confused by it not working as expected, it seems better to not define this
particular macro.
gdb/ChangeLog:
2019-12-12 Luis Machado <luis.machado@linaro.org>
* gdbsupport/safe-strerror.c: Don't include diagnostics.h.
(select_strerror_r): Use ATTRIBUTE_UNUSED instead of the diagnostics
macros.
include/ChangeLog:
2019-12-12 Luis Machado <luis.machado@linaro.org>
* diagnostics.h (DIAGNOSTIC_IGNORE_UNUSED_FUNCTION). Remove
definitions.
Change-Id: Iad6123d61d76d111e3ef8d24aa8c60112304c749
The "winheight" command resizes a specified window, resizing the other
windows in the layout to adapt. In the current code, this is done by
examining each possible layout separately. The new layout code has a
more general approach to handling this, and this patch simply removes
the old code in favor of a call into the new layout engine.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (tui_set_win_height_command): Call
tui_adjust_window_height.
(tui_adjust_win_heights, new_height_ok): Remove.
* tui/tui-layout.h (tui_adjust_window_height): Declare.
* tui/tui-layout.c (tui_adjust_window_height): New function.
Change-Id: I6bb681375a46adc8d29fd06f581deed4e078e78a
The TUI has separate code for each possible layout to handle the case
where the terminal window is resized. With the new layout code, this
can all be replaced with a call to tui_apply_current_layout, which
simply re-applies the current layout.
This results in some small differences in behavior when resizing, so
some tests are updated.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (tui_resize_all): Remove code, call
tui_apply_current_layout.
gdb/testsuite/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* gdb.tui/resize.exp: Update.
* gdb.tui/empty.exp (layouts): Update.
Change-Id: I3dc6c02a753d495d9ab5e8213d550a147198ce6f
This patch introduces the first use of tui_layout, by changing
show_layout to clone and use the appropriate tui_layout.
This resulted in one minor layout change, and also in the unintended
-- but good -- side effect that the title of each boxed window is now
visible.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-layout.h (tui_apply_current_layout): Declare.
* tui/tui-layout.c (standard_layouts, applied_layout): New
globals.
(tui_apply_current_layout): New function.
(show_layout): Set applied_layout. Call
tui_apply_current_layout.
(show_source_command, show_disasm_command)
(show_source_disasm_command, show_data)
(show_source_or_disasm_and_command): Remove.
(initialize_layouts): New function.
(_initialize_tui_layout): Call initialize_layouts.
gdb/testsuite/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* gdb.tui/regs.exp: Update.
* gdb.tui/empty.exp (layouts): Update.
* gdb.tui/basic.exp: Update.
* lib/tuiterm.exp (_check_box): Don't check bottom border.
Change-Id: If1ee06ee58f4803e8c213f4ab0f5bb59f4650ec2
This introduces a new approach to window layout for the TUI. The idea
behind this code is that a layout should be specified in a declarative
way, and then be applied by generic code that does not need to know
the specifics of every possible layout.
This patch itself does not change any behavior, because the new layout
engine isn't yet connected to anything. That is, this merely
introduces the implementation.
This generic approach makes the code more maintainable. It also
enables some future changes:
* New window types are simpler to add;
* User-specified layouts are possible; and
* Horizontal layouts are more attainable
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-layout.h (class tui_layout_base)
(class tui_layout_window, class tui_layout_split): New.
* tui/tui-layout.c (tui_get_window_by_name)
(tui_layout_window::clone, tui_layout_window::apply)
(tui_layout_window::get_sizes, tui_layout_window::add_split)
(tui_layout_split::add_window, tui_layout_split::clone)
(tui_layout_split::get_sizes)
(tui_layout_split::set_weights_from_heights)
(tui_layout_split::adjust_size, tui_layout_split::apply): New
functions.
(tui_layout_split::add_split, tui_layout_split::add_split)
(tui_layout_split::set_weights_from_heights)
(tui_layout_split::set_weights_from_heights): New functions.
Change-Id: I3a4cae666327b617d862aaa356f8179f945c6a4e
struct tui_point does not help very much. It is only used for
storage, and never passed between functions. I think it makes the
code more verbose without any corresponding benefit, so this patch
removes it.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-wingeneral.c (tui_gen_win_info::make_window): Update.
* tui/tui-win.c (tui_adjust_win_heights, tui_resize_all): Update.
* tui/tui-layout.c (tui_gen_win_info::resize): Update.
* tui/tui-data.h (struct tui_point): Remove.
(struct tui_gen_win_info) <origin>: Remove.
<x, y>: New fields.
* tui/tui-command.c (tui_cmd_window::resize): Update.
Change-Id: I3f77920585b9ea9e2b4b189f3f3ae32d4da0c252