When there is more than one inferior, the "record btrace" command should
only apply to the current inferior.
gdb/ChangeLog:
2020-03-19 Markus Metzger <markus.t.metzger@intel.com>
* record-btrace.c (record_btrace_enable_warn): Ignore thread if
its inferior is not recorded by us.
(record_btrace_target_open): Replace call to all_non_exited_threads ()
with call to current_inferior ()->non_exited_threads ().
(record_btrace_target::stop_recording): Likewise.
(record_btrace_target::close): Likewise.
(record_btrace_target::wait): Likewise.
(record_btrace_target::record_stop_replaying): Likewise.
gdb/testsuite/ChangeLog:
2020-03-19 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/multi-inferior.c: New test.
* gdb.btrace/multi-inferior.exp: New file.
GDB silently ignores attempts to enable branch tracing on a thread that is
already recorded. This shouldn't happen as recording is enabled exactly
once:
- when the btrace record target is opened for existing threads
- when a new thread is added while the btrace record target is pushed
GDB also silently ignores if recording is disabled on threads that were not
recorded. This shouldn't happen, either, since when stopping recording,
we only disable recording on threads that were recorded.
GDB further silently ignores if recording was not enabled by the
corresponding target method. Also this shouldn't happen since the target
is supposed to already throw an error if recording cannot be enabled.
This new error in btrace_enable catches cases where the target silently
failed to enable recording.
Throw an error in those cases.
This allows us to detect an actual issue more easily. It will be
addressed in the next patch.
gdb/ChangeLog:
2020-03-19 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (btrace_enable): Throw an error on double enables and
when enabling recording fails.
(btrace_disable): Throw an error if the thread is not recorded.
In the record-btrace target, while replaying, we can only provide the PC
register. The btrace state is stored in the thread_info. So, when trying
to determine whether we are currently replaying, GDB calls
find_thread_ptid() to obtain the thread_info. It also asserts that we do
have a thread_info.
For new threads, libthread-db may fetch registers before the thread is
known to GDB. In this case, find_thread_ptid() returns nullptr and the
assertion fails.
Forward the fetch_registers request to the target beneath in that case.
gdb/ChangeLog:
2020-03-19 Markus Metzger <markus.t.metzger@intel.com>
* record-btrace.c (record_btrace_target::fetch_registers): Forward
request if we do not have a thread_info.
gdb/testsuite/ChangeLog:
2020-03-19 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/enable-new-thread.c: New test.
* gdb.btrace/enable-new-thread.exp: New file.
Consider the test-case from this patch, compiled with pthread support:
...
$ gcc gdb/testsuite/gdb.threads/killed-outside.c -lpthread -g
...
After running to all_started, we can print pid:
...
$ gdb a.out -ex "b all_started" -ex run -ex "delete 1" -ex "p pid"
...
Reading symbols from a.out...
Breakpoint 1 at 0x40072b: file killed-outside.c, line 29.
Starting program: /data/gdb_versions/devel/a.out
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
[New Thread 0x7ffff77fc700 (LWP 3155)]
Thread 1 "a.out" hit Breakpoint 1, all_started () at killed-outside.c:29
29 }
$1 = 3151
(gdb)
...
If we then kill the inferior using an external SIGKILL:
...
(gdb) shell kill -9 3151
...
and subsequently continue:
...
(gdb) c
Continuing.
Couldn't get registers: No such process.
Couldn't get registers: No such process.
(gdb) Couldn't get registers: No such process.
(gdb) Couldn't get registers: No such process.
(gdb) Couldn't get registers: No such process.
<repeat>
...
gdb hangs repeating the same warning. Typing control-C no longer helps,
and we have to kill gdb.
This is a regression since commit 873657b9e8 "Preserve selected thread in
all-stop w/ background execution". The commit adds a
scoped_restore_current_thread typed variable restore_thread to
fetch_inferior_event, and the hang is caused by the constructor throwing an
exception.
Fix this by catching the exception in the constructor.
Build and reg-tested on x86_64-linux.
gdb/ChangeLog:
2020-04-21 Tom de Vries <tdevries@suse.de>
PR gdb/25471
* thread.c
(scoped_restore_current_thread::scoped_restore_current_thread): Catch
exception in get_frame_id.
gdb/testsuite/ChangeLog:
2020-04-21 Tom de Vries <tdevries@suse.de>
PR gdb/25471
* gdb.threads/killed-outside.c: New test.
* gdb.threads/killed-outside.exp: New file.
There was an existing jit-protocol.h defining common symbols needed for
JIT-supporting application, however, it was only used by few tests.
Others redeclared the same symbols.
This unifies all tests to use jit-protocol.h
gdb/testsuite/ChangeLog:
2020-02-18 Mihails Strasuns <mihails.strasuns@intel.com>
* gdb.base/jit-attach-pie.c: Use jit-protocol.h.
* gdb.base/jit-elf-main.c: Use jit-protocol.h.
* gdb.base/jit-reader-host.c: Use jit-protocol.h.
* gdb.base/jit-reader-simple-jit.c: Use jit-protocol.h.
* gdb.base/jit-protocol.h: Update definitions to match all usage
contexts.
Reorganizes how JIT related test files to be more clear what are related
to JIT reader system tests and what use JIT from ELF objfiles. Those two
approaches are quite different in GDB implementation and require very
different test setup. Keeping distinction clear at the file name level
makes it easier to maintain the testsuite.
gdb/testsuite/ChangeLog:
2020-02-18 Mihails Strasuns <mihails.strasuns@intel.com>
* gdb.base: Rename all jit related test and source files.
Fixes jit-reader test failures on systems that have more registers than
expected by the current condition.
On Intel i9-7920X the following extra registers are printed:
k0 0x0 0
k1 0x0 0
k2 0x0 0
k3 0x0 0
k4 0x0 0
k5 0x0 0
k6 0x0 0
k7 0x0 0
gdb/testsuite/ChangeLog:
2020-02-18 Mihails Strasuns <mihails.strasuns@intel.com>
* gdb.base/jit-reader.exp: Relax register output check.
Extend .symver directive to update visibility of the original symbol and
assign one original symbol to different versioned symbols:
.symver foo, foo@VERS_1, local # Change foo to a local symbol.
.symver foo, foo@VERS_2, hidden # Change foo to a hidden symbol.
.symver foo, foo@@VERS_3, remove # Remove foo from symbol table.
.symver foo, bar@V1 # Assign foo to bar@V1 and baz@V2.
.symver foo, baz@V2
PR gas/23840
PR gas/25295
* NEWS: Mention .symver extension.
* config/obj-elf.c (obj_elf_find_and_add_versioned_name): New
function.
(obj_elf_symver): Call obj_elf_find_and_add_versioned_name to
add a version name. Add local, hidden and remove visibility
support.
(elf_frob_symbol): Handle the list of version names. Update the
original symbol to local, hidden or remove it from the symbol
table.
(elf_frob_file_before_adjust): Handle the list of version names.
* config/obj-elf.h (elf_visibility): New.
(elf_versioned_name_list): Likewise.
(elf_obj_sy): Change local to bitfield. Add rename, bad_version
and visibility. Change versioned_name pointer to struct
elf_versioned_name_list.
* doc/as.texi: Update .symver directive.
* testsuite/gas/symver/symver.exp: Run all *.d tests. Add more
error checking tests.
* testsuite/gas/symver/symver6.d: New file.
* testsuite/gas/symver/symver7.d: Likewise.
* testsuite/gas/symver/symver7.s: Likewise.
* testsuite/gas/symver/symver8.d: Likewise.
* testsuite/gas/symver/symver8.s: Likewise.
* testsuite/gas/symver/symver9.s: Likewise.
* testsuite/gas/symver/symver9a.d: Likewise.
* testsuite/gas/symver/symver9b.d: Likewise.
* testsuite/gas/symver/symver10.s: Likewise.
* testsuite/gas/symver/symver10a.d: Likewise.
* testsuite/gas/symver/symver10b.d: Likewise.
* testsuite/gas/symver/symver11.d: Likewise.
* testsuite/gas/symver/symver11.s: Likewise.
* testsuite/gas/symver/symver12.d: Likewise.
* testsuite/gas/symver/symver12.s: Likewise.
* testsuite/gas/symver/symver13.d: Likewise.
* testsuite/gas/symver/symver13.s: Likewise.
* testsuite/gas/symver/symver14.d: Likewise.
* testsuite/gas/symver/symver14.l: Likewise.
* testsuite/gas/symver/symver15.d: Likewise.
* testsuite/gas/symver/symver15.l: Likewise.
* testsuite/gas/symver/symver6.l: Removed.
* testsuite/gas/symver/symver6.s: Updated.
ELF size_dynamic_sections is called by the ELF backend linker after all
the linker input files have been seen but before the section sizes have
been set. After the sections sizes have been set, target-specific,
global optimizations may make some dynamic sections zero-sized if they
are no longer needed.
Add ELF strip_zero_sized_dynamic_sections so that ELF backend linker can
strip zero-sized dynamic sections after the sections sizes have been set.
bfd/
PR ld/25849
* elf-bfd.h (elf_backend_data): Add
elf_backend_strip_zero_sized_dynamic_sections.
(_bfd_elf_strip_zero_sized_dynamic_sections): New prototype.
* elf64-alpha.c (elf_backend_strip_zero_sized_dynamic_sections):
New macro.
* elflink.c (_bfd_elf_strip_zero_sized_dynamic_sections): New
function.
* elfxx-target.h (elf_backend_strip_zero_sized_dynamic_sections):
New macro.
(elfNN_bed): Add elf_backend_strip_zero_sized_dynamic_sections.
ld/
PR ld/25849
* ldelfgen.c (ldelf_map_segments): Call
elf_backend_strip_zero_sized_dynamic_sections.
* testsuite/ld-alpha/tlsbinr.rd: Updated.
This fixes:
FAIL: DT_TEXTREL map file warning
* elf64-alpha.c (alpha_elf_reloc_entry): Replace reltext with
sec.
(elf64_alpha_check_relocs): Set sec instead of reltext. Warn
DT_TEXTREL with -M.
(elf64_alpha_calc_dynrel_sizes): Warn DT_TEXTREL with -M.
git commit 211dc24b87 removed most sh5 and sh64 SuperH support, after
they were obsoleted by git commit 2b213129c5. This patch removes a
few remaining pieces that should have gone with 211dc24b87.
include/
* elf/sh.h (STO_SH5_ISA32, SHF_SH5_ISA32, SHF_SH5_ISA32_MIXED),
(SHT_SH5_CR_SORTED, STT_DATALABEL): Delete.
bfd/
* elf32-sh.c (sh_elf_relocate_section): Remove STO_SH5_ISA32
processing.
I recently learned that move constructors generally should be marked
"noexcept". This ensures that standard containers will move objects
when possible, rather than copy them.
This patch fixes the cases I could find. Note that implicitly-defined
or defaulted move constructors will automatically do what you'd
expect; that is, they are noexcept if all the members have noexcept
move constructors.
While doing this, I noticed a couple of odd cases where the move
constructor seemed to assume that the object being constructed could
have state requiring destruction. I've fixed these as well. See
completion_result and scoped_mmap.
gdb/ChangeLog
2020-04-20 Tom Tromey <tromey@adacore.com>
* python/python.c (struct gdbpy_event): Mark move constructor as
noexcept.
* python/py-tui.c (class gdbpy_tui_window_maker): Mark move
constructor as noexcept.
* completer.h (struct completion_result): Mark move constructor as
noexcept.
* completer.c (completion_result::completion_result): Use
initialization style. Don't call reset_match_list.
gdbsupport/ChangeLog
2020-04-20 Tom Tromey <tromey@adacore.com>
* scoped_mmap.h (scoped_mmap): Mark move constructor as noexcept.
Use initialization style. Don't call destroy.
* scoped_fd.h (class scoped_fd): Mark move constructor as
noexcept.
* gdb_ref_ptr.h (class ref_ptr): Mark move constructor as
noexcept.
This commit updates gdb.base/nested-subp[1-3].exp to determine
whether whether nested functions are supported using the function
support_nested_function_tests.
gdb/testsuite/ChangeLog:
* gdb.base/nested-subp1.exp: Use support_nested_function_tests.
* gdb.base/nested-subp2.exp: Likewise.
* gdb.base/nested-subp3.exp: Likewise.
Clang does not support nested functions, and there are no plans to
change this. This commit disables the three nested function tests
when using clang.
gdb/testsuite/ChangeLog:
* gdb.base/nested-subp1.exp: Disable test when using clang.
* gdb.base/nested-subp2.exp: Likewise.
* gdb.base/nested-subp3.exp: Likewise.
Clang fails to compile the above file, with the following error:
warning: using directive refers to implicitly-defined namespace 'std'
This prevents the following testcase from executing:
gdb.cp/exception.exp
Clang fails to compile the above file, with the following error:
warning: using the result of an assignment as a condition without
parentheses [-Wparentheses]
This prevents the following testcase from executing:
gdb.trace/tspeed.exp
Clang fails to compile the above file, with the following error:
warning: while loop has empty body [-Wempty-body]
This prevents the following testcases from executing:
gdb.base/jit.exp
gdb.base/jit-so.exp
Separately, in translate_symbol_table() the 16-bit symbol values were sign extended to unsigned long (e.g., 64 bits) when they really should be treated as unsigned so the value remains 16 bits.
PR 25828
* pdp11.c (N_STAB): Modify value to avoid conflict with N_EXT
causing globals from linker script to be treated as debug symbols.
(translate_symbol_table): Don't sign-extend symbol values from 16
to 64 bits in nm output.
This patch implements the TSB instructions:
https://developer.arm.com/docs/ddi0596/f/base-instructions-alphabetic-order/
tsb-csync-trace-synchronization-barrier
Since TSB and PSB both use the same (and only) argument "CSYNC", this patch
reuses it for TSB. However, the same argument would imply different value
for CRm:Op2 which are anyway fixed values, so I have diverted the
inserter/extracter function to dummy versions instead of the "hint" version.
The operand checker part still uses the existing infratructure for
AARCH64_OPND_BARRIER_PSB to make sure the operand is parsed correctly.
gas/ChangeLog:
2020-04-20 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_barrier_psb): Update error messages
to include TSB.
* testsuite/gas/aarch64/system-2.d: Update -march and new tsb tests.
* testsuite/gas/aarch64/system-2.s: Add new tsb tests.
* testsuite/gas/aarch64/system.d: Update.
opcodes/ChangeLog:
2020-04-20 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm.c (aarch64_ins_none): New.
* aarch64-asm.h (ins_none): New declaration.
* aarch64-dis.c (aarch64_ext_none): New.
* aarch64-dis.h (ext_none): New declaration.
* aarch64-opc.c (aarch64_print_operand): Update case for
AARCH64_OPND_BARRIER_PSB.
* aarch64-tbl.h (aarch64_opcode_table): Add tsb.
(AARCH64_OPERANDS): Update inserter/extracter for
AARCH64_OPND_BARRIER_PSB to use new dummy functions.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
There are a few instruction in AArch64 that are in the HINT space. Any of
these instructions should be accepted by the assembler/disassembler at any
architecture version. This patch fixes the existing instructions that are
not behaving accordingly.
I have used all of the instructions mentioned in the following to make the
changes:
https://developer.arm.com/docs/ddi0596/f/base-instructions-alphabetic-order/
hint-hint-instruction
gas/ChangeLog:
2020-04-20 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/bti.d: Update -march option.
* testsuite/gas/aarch64/illegal-bti.d: Remove.
* testsuite/gas/aarch64/illegal-bti.l: Remove.
* testsuite/gas/aarch64/illegal-ras-1.l: Remove esb.
* testsuite/gas/aarch64/illegal-ras-1.s: Remove esb.
opcodes/ChangeLog:
2020-04-20 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_bti, BTI, BTI_INSN): Remove.
(aarch64_feature_ras, RAS): Likewise.
(aarch64_feature_stat_profile, STAT_PROFILE): Likewise.
(aarch64_opcode_table): Update bti, xpaclri, pacia1716, pacib1716,
autia1716, autib1716, esb, psb, dgh, paciaz, paciasp, pacibz, pacibsp,
autiaz, autiasp, autibz, autibsp to be CORE_INSN.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This is another one where not cleaning up sufficiently after
processing one file can lead to errors when processing the next file.
We have ngnuchains non-zero but gnuchains NULL in the following:
off < ngnuchains && (gnuchains[off] & 1) == 0
* readelf.c (process_symbol_table): Clear ngnuchains, ngnubuckets
and nbuckets.
This patch is aimed at fixing a number of oss-fuzz segfaults that
don't reproduce reliably with their current infrastructure, the
problem being that one invocation of readelf is effectively being run
on multiple object files. I believe that these segfaults could be
reliably reproduced with just two fuzzed objects being presented to
readelf, but those inputs are currently not identified by oss-fuzz.
So there is some guesswork involved in this patch. The idea here is
to clear stashed data such as symtab_shndx_list that is processed
using section header info, at the same time that header info is
cleared.
* readelf.c (process_section_headers): Free dynamic symbols etc.
earlier.
This fixes two leaks found in the new code supporting display of
dynamic symbols retrieved via dynamic tags.
* readelf.c (get_num_dynamic_syms): Formatting. Don't return
on error without freeing.
(process_dynamic_section): Don't recreate dynamic symbols from
dynamic tag info when the dynamic symbols have already been
read via section headers.
Stripping .rela.branch_lt is easy enough but messes with the
testsuite due to stub symbols (that use section id) changing. Tests
that run on more than one target variant can be tricky to fix, this
renaming happened to work.
bfd/
* elf64-ppc.c (ppc64_elf_size_stubs): Strip relbrlt too.
ld/
* testsuite/ld-powerpc/tlsopt5.s: Rename foo to aaaaa.
* testsuite/ld-powerpc/tlsopt5.d: Adjust to suit.
* testsuite/ld-powerpc/tlsopt6.d: Likewise.
When I removed init_w32_command_list, I weirdly neglected to see if it
was called anywhere else. This patch restores the function, which is
called from windows-nat.c. Sorry about the breakage.
Is it possible to have a windows-native gdb that isn't also using
windows-tdep?
Anyway, I'm checking this in.
gdb/ChangeLog
2020-04-18 Tom Tromey <tom@tromey.com>
* windows-tdep.c (init_w32_command_list)
(w32_prefix_command_valid): Restore.
(_initialize_windows_tdep): Call init_w32_command_list.
Two ld tests currently XPASS on 64-bit Solaris/SPARC:
XPASS: ld-elf/warn1
XPASS: ld-elf/warn2
They were xfail'ed on Solaris/SPARCv9 back in 2005
https://sourceware.org/pipermail/binutils/2005-February/039268.html
but obviously this no longer appplies.
Fixed by removing the xfail's.
Tested on sparcv9-sun-solaris2.11 and sparc-sun-solaris2.11.
* testsuite/ld-elf/warn1.d: Don't xfail on 64-bit Solaris/SPARC.
* testsuite/ld-elf/warn2.d: Likewise.
Since the .set directive of ELF/alpha target is different, define NO_SET
to 1 to use "=" for ELF/alpha target.
* testsuite/ld-elf/elf.exp (ASFLAGS): Add "--defsym NO_SET=1" for
alpha target.
* testsuite/ld-elf/pr19789.s: Use "=" if NO_SET is defined.
Add a fallback definition of PTRACE_ATTACH that is an alias of
PT_ATTACH. Change the 4th argument of ptrace(2) to 0 as it is
compatible with void * (Linux) and int (NetBSD) arguments.
Include <sys/types.h> for <sys/ptrace.h>.
gdb/testsuite/ChangeLog:
* gdb.base/attach-twice.c: Include "sys/types.h".
(PTRACE_ATTACH): Add fallback definition.
(main): Pass `0' to the 4th argument of `ptrace'.
Currently there are many prefix commands that do nothing but call
either help_list or cmd_show_list. I happened to notice that one such
call, for "set print type", used the wrong command list parameter,
causing incorrect output.
Rather than fix this bug in isolation, I decided to eliminate this
possibility by adding two new ways to add prefix commands, which
simply route the call to help_list or cmd_show_list, as appropriate.
This makes it impossible for a mismatch to occur.
In some cases, a bit of output was removed; however, I don't think
this output in general was very useful. It seemed redundant with
what's already printed by help_list. A representative example is this
hunk, removed from ada-lang.c:
- printf_unfiltered (_(\
-"\"set ada\" must be followed by the name of a setting.\n"));
This simplified the CLI style set/show commands quite a bit, and
allowed the deletion of a macro.
This also cleans up some unusual code in windows-tdep.c.
Tested on x86-64 Fedora 30. Note that I have no way to build the
go32-nat.c change.
gdb/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* auto-load.c (show_auto_load_cmd): Remove.
(auto_load_show_cmdlist_get): Use add_show_prefix_cmd.
* arc-tdep.c (_initialize_arc_tdep): Use add_show_prefix_cmd.
(maintenance_print_arc_command): Remove.
* tui/tui-win.c (tui_command): Remove.
(tui_get_cmd_list): Use add_basic_prefix_cmd.
* tui/tui-layout.c (tui_layout_command): Remove.
(_initialize_tui_layout): Use add_basic_prefix_cmd.
* python/python.c (user_set_python, user_show_python): Remove.
(_initialize_python): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* guile/guile.c (set_guile_command, show_guile_command): Remove.
(install_gdb_commands): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_guile_command): Remove.
* dwarf2/read.c (set_dwarf_cmd, show_dwarf_cmd): Remove.
(_initialize_dwarf2_read): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-style.h (class cli_style_option) <add_setshow_commands>:
Remove do_set and do_show parameters.
* cli/cli-style.c (set_style, show_style): Remove.
(_initialize_cli_style): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(cli_style_option::add_setshow_commands): Remove do_set and
do_show parameters.
(cli_style_option::add_setshow_commands): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
(STYLE_ADD_SETSHOW_COMMANDS): Remove macro.
(set_style_name): Remove.
* cli/cli-dump.c (dump_command, append_command): Remove.
(srec_dump_command, ihex_dump_command, verilog_dump_command)
(tekhex_dump_command, binary_dump_command)
(binary_append_command): Remove.
(_initialize_cli_dump): Use add_basic_prefix_cmd.
* windows-tdep.c (w32_prefix_command_valid): Remove global.
(init_w32_command_list): Remove; move into ...
(_initialize_windows_tdep): ... here. Use add_basic_prefix_cmd.
* valprint.c (set_print, show_print, set_print_raw)
(show_print_raw): Remove.
(_initialize_valprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* typeprint.c (set_print_type, show_print_type): Remove.
(_initialize_typeprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record.c (set_record_command, show_record_command): Remove.
(_initialize_record): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-cmds.c (_initialize_cli_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_command, show_command, set_debug, show_debug): Remove.
* top.h (set_history, show_history): Don't declare.
* top.c (set_history, show_history): Remove.
* target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd)
(unset_tdesc_cmd): Remove.
(_initialize_target_descriptions): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* symtab.c (info_module_command): Remove.
(_initialize_symtab): Use add_basic_prefix_cmd.
* symfile.c (overlay_command): Remove.
(_initialize_symfile): Use add_basic_prefix_cmd.
* sparc64-tdep.c (info_adi_command): Remove.
(_initialize_sparc64_adi_tdep): Use add_basic_prefix_cmd.
* sh-tdep.c (show_sh_command, set_sh_command): Remove.
(_initialize_sh_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* serial.c (serial_set_cmd, serial_show_cmd): Remove.
(_initialize_serial): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Remove.
(_initialize_ser_tcp): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* rs6000-tdep.c (set_powerpc_command, show_powerpc_command)
(_initialize_rs6000_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* riscv-tdep.c (show_riscv_command, set_riscv_command)
(show_debug_riscv_command, set_debug_riscv_command): Remove.
(_initialize_riscv_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* remote.c (remote_command, set_remote_cmd): Remove.
(_initialize_remote): Use add_basic_prefix_cmd.
* record-full.c (set_record_full_command)
(show_record_full_command): Remove.
(_initialize_record_full): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record-btrace.c (cmd_set_record_btrace)
(cmd_show_record_btrace, cmd_set_record_btrace_bts)
(cmd_show_record_btrace_bts, cmd_set_record_btrace_pt)
(cmd_show_record_btrace_pt): Remove.
(_initialize_record_btrace): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ravenscar-thread.c (set_ravenscar_command)
(show_ravenscar_command): Remove.
(_initialize_ravenscar): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* mips-tdep.c (show_mips_command, set_mips_command)
(_initialize_mips_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_check_command, maintenance_print_command)
(maintenance_set_cmd, maintenance_show_cmd): Remove.
(_initialize_maint_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(show_per_command_cmd): Remove.
* maint-test-settings.c (maintenance_set_test_settings_cmd):
Remove.
(maintenance_show_test_settings_cmd): Remove.
(_initialize_maint_test_settings): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint-test-options.c (maintenance_test_options_command):
Remove.
(_initialize_maint_test_options): Use add_basic_prefix_cmd.
* macrocmd.c (macro_command): Remove
(_initialize_macrocmd): Use add_basic_prefix_cmd.
* language.c (set_check, show_check): Remove.
(_initialize_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* infcmd.c (unset_command): Remove.
(_initialize_infcmd): Use add_basic_prefix_cmd.
* i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Remove.
(_initialize_i386_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* go32-nat.c (go32_info_dos_command): Remove.
(_initialize_go32_nat): Use add_basic_prefix_cmd.
* cli/cli-decode.c (do_prefix_cmd, add_basic_prefix_cmd)
(do_show_prefix_cmd, add_show_prefix_cmd): New functions.
* frame.c (set_backtrace_cmd, show_backtrace_cmd): Remove.
(_initialize_frame): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* dcache.c (set_dcache_command, show_dcache_command): Remove.
(_initialize_dcache): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cp-support.c (maint_cplus_command): Remove.
(_initialize_cp_support): Use add_basic_prefix_cmd.
* btrace.c (maint_btrace_cmd, maint_btrace_set_cmd)
(maint_btrace_show_cmd, maint_btrace_pt_set_cmd)
(maint_btrace_pt_show_cmd, _initialize_btrace): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
* breakpoint.c (save_command): Remove.
(_initialize_breakpoint): Use add_basic_prefix_cmd.
* arm-tdep.c (set_arm_command, show_arm_command): Remove.
(_initialize_arm_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ada-lang.c (maint_set_ada_cmd, maint_show_ada_cmd)
(set_ada_command, show_ada_command): Remove.
(_initialize_ada_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* command.h (add_basic_prefix_cmd, add_show_prefix_cmd): Declare.
gdb/testsuite/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* gdb.cp/maint.exp (test_help): Simplify multiple_help_body.
Update tests.
* gdb.btrace/cpu.exp: Update tests.
* gdb.base/maint.exp: Update tests.
* gdb.base/default.exp: Update tests.
* gdb.base/completion.exp: Update tests.
VDUP (neon) instructions can be conditional, but this is not taken into
account in the current master. This commit fixes that by i) fixing the
VDUP instruction masks and ii) adding logic for disassembling
conditional neon instructions.
opcodes * arm-dis.c (neon_opcodes): Fix VDUP instruction masks.
(print_insn_neon): Support disassembly of conditional
instructions.
binutils* testsuite/binutils-all/arm/vdup-cond.d: New test for testing that
conditional VDUP instructions are disassembled correctly.
* testsuite/binutils-all/arm/vdup-cond.s: New file used by
vdup-cond.d.
* testsuite/binutils-all/arm/vdup-thumb.d: New test for testing
that VDUP instructions (which are conditional in A32) can be
disassembled in thumb mode.
* testsuite/binutils-all/arm/vdup-cond.s: New file used by
vdup-thumb.d.
* testsuite/config/default.exp: If not already set then create the
CCC_OVERRIDE_OPTIONS environment variable to help when running the
testsuite with clang.
* testsuite/ld-elf/pr22269-1.c: Add a missing return statement.
* testsuite/ld-elfvers/vers.exp: Add checks to detect if files
were built before attempting to copy them.
The only two potential users (NetBSD, OpenBSD) use svr4_auxv_parse.
gdb/ChangeLog:
* nbsd-nat.c (inf_ptrace_target::auxv_parse): Remove.
* nbsd-nat.h (inf_ptrace_target::auxv_parse): Likewise.
BFIN has lots of instructions that contain "=", so "sym = expression"
is disabled for that target. This makes an exception for assignment
to dot, fixing the recent regression of ld-scripts/pr18963.
* config/tc-bfin.h (TC_EQUAL_IN_INSN): Allow assignment to dot.
