* config/tc-mn10300.h (md_allow_eh_opt): Define. Only allow call frame optimization if linker relaxation is not enabled.
* gas/elf/elf.exp: Disable ehopt test for mn10300.
(display_debug_frames): Remove check in is_relocatable.
* dwarf.h (is_relocatable): Remove declaration.
* objdump.c (is_relocatable): New static definition.
* readelf.c (dump_relocations): Make the function void.
(is_32bit_abs_reloc): Add support for x86, Arc, Arm, D10V, Dlx, OR32 and Score.
(is_32bit_pcrel_reloc): Add support for x86 and Arm.
(is_16bit_abs_reloc): Add support for D10V.
(debug_apply_rela_addends): Rename to debug_apply_relocations.
Add code to support rel relocations.
(load_debug_section): Fix call to debug_apply_relocations.
(get_file_header): Remove setting of is_relocatable.
* gas/cfi/cfi-common-6.d: Allow for possible relocation of the .debug.eh_frame section.
* reloc.c (BFD_RELOC_MN10300_ALIGN): Add.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf-m10300.h: Handle R_MN10300_ALIGN relocs.
* mn10300_elf_relax_delete_bytes): Honour R_MN10300_ALIGN relocs.
Re-fix off by one error in comparisons.
* config/tc-mn10300.c (tc_gen_reloc): Fix test that decides when
sym_diff relocs should be generated.
(md_apply_fix): Skip R_MN10300_ALIGN relocs.
(mn10300_fix_adjustable): Do not adjust R_MN10300_ALIGN relocs.
(mn10300_handle_align): New function. Generate R_MN10300_ALIGN
relocs to record alignment requests.
* config/tc-mn10300.h (TC_FORCE_RELOCATION_SUB_SAME): Also force
R_MN10300_ALIGN relocs.
(HANDLE_ALIGN): Define. Call mn10300_handle_align.
* gas/all/gas.exp: Do not run diff1.s test for mn10300.
* ld-mn10300/mn10300.exp: Run new tests. Skip i126256 test if
a compiler is not available.
* ld-mn10300/i112045-3.s: New test.
* ld-mn10300/i112045-3.d: Expected disassembly.
* ld-mn10300/i135409.s: Rename to i135409-1.s.
* ld-mn10300/i135409.d: Rename to i135409-1.d
* ld-mn10300/i135409-2.s: New test.
* ld-mn10300/i135409-2.d: Expected symbol table.
* ld-mn10300/i36434.d: Adjust expected disassembly.
comma then the following argument must be a subsection number.
* testsuite/gas/elf/elf.exp (run_elf_list_test): Run section6 test.
* testsuite/gas/elf/section6.s: New file: Check behaviour of .pushsection with a subsection argument.
* testsuite/gas/elf/section6.d: New file: Expected disassembly.
* opcodes/mips-dis.c (mips_cp0_names_r3000): New definition.
(mips_cp0_names_r4000): Likewise.
(mips_arch_choices): Link to the above as appropriate.
gas/testsuite/:
* gas/mips/cp0-names-r3000.d: New test for R3000 CP0 symbolic
disassembly.
* gas/mips/cp0-names-r4000.d: New test for R4000/R4400 symbolic
CP0 disassembly.
* mips/mips.exp: Run the new tests.
* config/tc-mips.c (AT): Rename to...
(ATREG): ... this.
(AT): New definition.
(mips_set_options): Rename "noat" to "at"; change the type.
(mips_opts): Update accordingly.
(append_insn): Likewise.
(macro_build_ldst_constoffset): Likewise.
(load_address): Likewise.
(macro, macro2): Likewise.
(s_mipsset): Handle ".set at=REG". Update handling of ".set at"
and ".set noat".
gas/testsuite/:
* gas/mips/at-1.d, gas/mips/at-2.l: New tests to check the ".set
at=REG" directive.
* gas/mips/at-1.s, gas/mips/at-2.s: Sources for the new tests.
* gas/mips/mips.exp: Run the new tests.
2007-10-04 David Daney <ddaney@avtrex.com>
* mips-opc.c (mips_builtin_opcodes): Mark lwxc1 as working on FP_S
registers.
gas/testsuite/
2007-10-04 David Daney <ddaney@avtrex.com>
* gas/mips/odd-float.d, gas/mips/odd-float.s: New test.
* gas/mips/mips.exp: Run it.
2007-09-27 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/5072
* gas/i386/i386.exp: Run x86-64-opcode-inval and
x86-64-opcode-inval-intel.
* gas/i386/x86-64-opcode-inval-intel.d: New.
* gas/i386/x86-64-opcode-inval.d: Likewise.
* gas/i386/x86-64-opcode-inval.s: Likewise.
opcodes/
2007-09-27 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/5072
* i386-dis.c: Update comments on '{', '}' and '|' to support
only AT&T and Intel modes.
(X86_64_4...X86_64_27): New.
(dis386): Updated. Use X86_64_4...X86_64_21.
(dis386_twobyte): Updated.
(float_mem): Likewise.
(x86_64_table): Add X86_64_4...X86_64_27.
(opc_ext_table): Updated. Use X86_64_22 and X86_64_27.
(putop): Updated handling of '{', '}' and '|' to support only
AT&T and Intel modes.
* config/m68k-parse.h (m68k_register): Use MBO instead of MBB.
(last_movec_reg): Change to MBO.
* config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB.
(m68k_ip): Use MBO instead of MBO.
(init_table): Use MBO instead of MBO. Add an entry for mbo.
gas/testsuite/
* gas/m68k/fido.s: Add tests for %mbo.
* gas/m68k/fido.d: Update accordingly.
opcodes/
* m68k-dis.c (print_insn_arg): Use %mbo instead of %mbb.
2007-09-26 Jan Beulich <jbeulich@novell.com>
* gas/i386/x86-64-addr32.d: Adjust expectations.
opcodes/
2007-09-26 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (OP_E_extended): Distinguish rip- and eip-
relative addressing. Update used_prefixes based on whether any
base or index register was printed.
2007-09-24 Carlos O'Donell <carlos@codesourcery.com>
* config/tc-mips.c (s_align): Set max_alignment to 28.
gas/testsuite/
2007-09-24 Carlos O'Donell <carlos@codesourcery.com>
* gas/mips/align.s, gas/mips/align.d: New test.
* gas/mips/mips.exp: Run it.
2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (intel_e04): Revert the last change.
gas/testsuite/
2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/x86-64-rip.s: Revert the last change.
* gas/i386/x86-64-rip-intel.d: Likewise.
* gas/i386/x86-64-rip.d: Likewise.
2007-09-12 Jan Beulich <jbeulich@novell.com>
* gas/i386/sse4_1.s, gas/i386/x86-64-sse4_1.s: Add two-operand forms
of blendvps, blendvpd, and pblendvb.
* gas/i386/sse4_1.d, gas/i386/sse4_1-intel.d,
gas/i386/x86-64-sse4_1.d, gas/i386/x86-64-sse4_1-intel.d: Adjust,
making last/first operand of blendvps, blendvpd, and pblendvb
optional.
opcodes/
2007-09-12 Jan Beulich <jbeulich@novell.com>
* i386-opc.tbl: Add two-operand forms of blendvps, blendvpd, and
pblendvb.
* i386-tbl.h: Regenerate.
* gas/i386/i386.exp: Run x86-64-reg and x86-64-reg-intel.
* gas/i386/x86-64-reg.s: New. Add tests for instructions
with one register operand.
* gas/i386/x86-64-reg-intel.d: Likewise.
* gas/i386/x86-64-reg.d: Likewise.
2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (process_suffix): Handle cmpxchg8b in
Intel mode.
gas/testsuite/
2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/mem.s: New. Add tests for instructions with one
memory operand.
* gas/i386/x86-64-mem.s: Likewise.
* gas/i386/mem-intel.d: Updated.
* gas/i386/mem.d: Likewise.
* gas/i386/x86-64-mem-intel.d: Likewise.
* gas/i386/x86-64-mem.d: Likewise.
opcodes/
2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (Md): New.
(grps): Use 0 on invlpg. Use M on fxsave and fxrstor. Use
Md on ldmxcsr and stmxcsr. Use b_mode on clflush.
(OP_0fae): Clear bytemode for sfence.
