PR ld/20302
* lexsup.c (set_segment_start): If resetting the start address of
a section, remember to generate a new script element as well.
* testsuite/ld-scripts/pr20302.d: New test.
* testsuite/ld-scripts/scripts.exp: Run the new test.
Add a configure option --enable-relro to decide whether -z relro should
be enabled in ELF linker by default. Default to yes for all Linux
targets, except FRV, HPPA, IA64 and MIPS, since many relro tests fail
on these targets.
PR ld/20283
* NEWS: Mention --enable-relro.
* configure.ac: Add --enable-relro.
(DEFAULT_LD_Z_RELRO): New. Set by --enable-relro.
* configure.tgt (ac_default_ld_z_relro): Default it to 1 for
some Linux targets.
* config.in: Regenerated.
* configure: Likewise.
* emultempl/elf32.em (gld${EMULATION_NAME}_before_parse): Set
link_info.relro to DEFAULT_LD_Z_RELRO.
* testsuite/config/default.exp (ld_elf_shared_opt): New.
* testsuite/lib/ld-lib.exp (run_dump_test): Pass
$ld_elf_shared_opt to ld for ELF targets with shared object
support.
(run_ld_link_tests): Likewise.
As with commit ed53407eec ("MIPS/BFD: Don't stop processing on
`bfd_reloc_outofrange'") don't bail out right away and instead continue
processing on a cross-mode jump conversion error, so that any further
issues are also reported. Adjust message formatting accordingly, using
`%X' to abort processing at conclusion. Remove the full stop from the
end of the message, for consistency across error reporting.
Adjust the corresponding test case accordingly and make it trigger the
error twice.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Call
`info->callbacks->einfo' rather than `*_bfd_error_handler' and
use the `%X%H' format for the cross-mode jump conversion error
message. Remove the full stop from the end of the message.
Continue processing rather than returning failure.
ld/
* testsuite/ld-mips-elf/mode-change-error-1a.s: Trigger an error
twice rather than once.
* testsuite/ld-mips-elf/mode-change-error-1.d: Adjust
accordingly. Remove the full stop from the end of the message.
ELF linker shouldn't skip the IR object when searching the symbol table
of an archive element. If linker doesn't know if the object file is an
IR object, it should give LTO plugin a chance to get the correct symbol
table and use the IR symbol table if the input is an IR object.
bfd/
PR ld/18250
PR ld/20267
* elflink.c: Include plugin.h if BFD_SUPPORTS_PLUGINS is
defined.
(elf_link_is_defined_archive_symbol): Call
bfd_link_plugin_object_p on unknown plugin object and use the
IR symbol table if the input is an IR object.
* plugin.c (bfd_link_plugin_object_p): New function.
* plugin.h (bfd_link_plugin_object_p): New prototype.
ld/
PR ld/20267
* testsuite/ld-plugin/lto.exp (lto_link_tests): Add test for
PR ld/20267.
(lto_run_tests): Likewise.
* testsuite/ld-plugin/pr20267a.c: New file.
* testsuite/ld-plugin/pr20267b.c: Likewise.
Also, don't check alignment on symbol from plugin dummy input.
bfd/
PR ld/20276
* elflink.c (elf_link_add_object_symbols): Don't check alignment
on symbol from plugin dummy input.
ld/
PR ld/20276
* plugin.c (plugin_notice): Set non_ir_ref on common symbols.
* testsuite/ld-plugin/lto.exp (lto_link_tests): Add test for
PR ld/20276.
(lto_run_tests): Likewise.
* testsuite/ld-plugin/pass.out: New file.
* testsuite/ld-plugin/pr20276a.c: Likewise.
* testsuite/ld-plugin/pr20276b.c: Likewise.
2016-06-17 Thomas Preud'homme <thomas.preudhomme@arm.com>
Tony Wang <tony.wang@arm.com>
bfd/
* elf32-arm.c (elf32_arm_stub_long_branch_thumb2_only): Define stub
sequence.
(stub_long_branch_thumb2_only): Define stub.
(arm_stub_is_thumb): Add case for arm_stub_long_branch_thumb2_only.
(arm_stub_long_branch_thumb2_only): Likewise.
(arm_type_of_stub): Use arm_stub_long_branch_thumb2_only for Thumb-2
capable targets.
ld/
* testsuite/ld-arm/arm-elf.exp (Thumb-Thumb farcall M profile):
Assemble for ARMv6-M.
(Thumb2-Thumb2 farcall M profile): New testcase.
* testsuite/ld-arm/farcall-thumb2-thumb2-m.d: New file.
* testsuite/ld-arm/jump-reloc-veneers-cond-long-backward.d: Update to
reflect the use of Thumb-2 veneers for Thumb-2 capable targets.
* testsuite/ld-arm/jump-reloc-veneers-cond-long.d: Likewise.
Since x86 elf_*_check_relocs is called after all symbols have been
resolved, there is no need to check undefined symbols for relocations
against IFUNC symbols.
bfd/
* elf32-i386.c (elf_i386_check_relocs): Don't check undefined
symbols for relocations against IFUNC symbols.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
ld/
* testsuite/ld-i386/i386.exp: Run pr19636-2e-nacl.
* testsuite/ld-i386/pr19636-2e.d: Skip for NaCl targets.
Remove .rel.plt section.
* testsuite/ld-i386/pr19636-2e-nacl.d: New file.
This patch fixes another edge case related to alignment property
records - reloc offsets adjacent to property record offsets were not
getting adjusted during relaxation.
bfd/
PR ld/20254
* elf32-avr.c (elf32_avr_relax_delete_bytes): Adjust reloc
offsets until reloc_toaddr.
ld/
PR ld/20254
* testsuite/ld-avr/avr-prop-6.d: New test.
* testsuite/ld-avr/avr-prop-6.s: New test.
Add the GOT base for R_386_GOT32/R_386_GOT32X relocations against IFUNC
symbols if there is no base register and disallow them for PIC.
bfd/
PR ld/20244
* elf32-i386.c (elf_i386_relocate_section): Add the .got.plt
section address for R_386_GOT32/R_386_GOT32X relocations against
IFUNC symbols if there is no base register and return error for
PIC.
ld/
PR ld/20244
* testsuite/ld-i386/i386.exp: Run pr20244-2a, pr20244-2b,
pr20244-2c and pr20244-2d.
* testsuite/ld-i386/no-plt.exp: Run pr20244-3a and pr20244-3b.
* testsuite/ld-i386/pr20244-2.s: New file.
* testsuite/ld-i386/pr20244-2a.d: Likewise.
* testsuite/ld-i386/pr20244-2b.d: Likewise.
* testsuite/ld-i386/pr20244-2c.d: Likewise.
* testsuite/ld-i386/pr20244-2d.d: Likewise.
* testsuite/ld-i386/pr20244-3a.c: Likewise.
* testsuite/ld-i386/pr20244-3b.S: Likewise.
* testsuite/ld-i386/pr20244-3c.S: Likewise.
* testsuite/ld-i386/pr20244-3d.S: Likewise.
When relocating R_386_GOT32 in "op $0, bar@GOT", we shouldn't subtract
GOT base without a base register and we should disallow it without a
base register for PIC.
bfd/
PR ld/20244
* elf32-i386.c (elf_i386_relocate_section): When relocating
R_386_GOT32, return error without a base register for PIC and
subtract the .got.plt section address only with a base register.
ld/
PR ld/20244
* testsuite/ld-i386/i386.exp: Run pr20244-1a and pr20244-1b.
* testsuite/ld-i386/pr20244-1.s: New file.
* testsuite/ld-i386/pr20244-1a.d: Likewise.
* testsuite/ld-i386/pr20244-1b.d: Likewise.
* testsuite/ld-i386/pr20244-1c.d: Likewise.
This patch fixes an edge case in linker relaxation that causes symbol
values to be computed incorrectly in the presence of align directives
in input source code.
bfd/
* elf32-avr.c (elf32_avr_relax_delete_bytes): Adjust syms
and relocs only if shrinking occurred.
ld/
* testsuite/ld-avr/avr-prop-5.d: New.
* testsuite/ld-avr/avr-prop-5.s: New.
This patch adds default data address space origin (0x800000) to the symbol addresses.
when disassemble lds/sts instructions. So that symbol names shall be printed in comments
for lds/sts instructions disassemble.
ld/
* testsuite/ld-avr/lds-mega.d: New test.
* testsuite/ld-avr/lds-mega.s: New test source.
* testsuite/ld-avr/lds-tiny.d: New test.
* testsuite/ld-avr/lds-tiny.s: New test source.
opcodes/
* avr-dis.c (avr_operand): Add default data address space origin (0x800000) to the
address and set as symbol address for LDS/ STS immediate operands.
To call an external function, the direct branch to the PLT entry can be
replaced by an indirect branch via the GOT slot, which is similar to the
first instruction in the PLT slot. Instead using the PLT slot as function
address, the function address is retrieved from the GOT slot. The
R_386_GOT32X relocation can be used to compute the address of the symbol’s
GOT entry without base register when PIC is disabled. In non-PIC
executable,
call/jmp *func@GOT
should be used for indirect branch via the GOT slot and
movl func@GOT, %eax
should be used to load function address. Unlike PIC case, no register
is needed to access GOT. If linker determines the function is defined
locally, it converts indirect branch via the GOT slot to direct branch
with a nop prefix and converts load via the GOT slot to load immediate
or lea.
* testsuite/ld-i386/libno-plt-1b.dd: New file.
* testsuite/ld-i386/libno-plt-1b.rd: Likewise.
* testsuite/ld-i386/no-plt-1a.dd: Likewise.
* testsuite/ld-i386/no-plt-1a.rd: Likewise.
* testsuite/ld-i386/no-plt-1b.dd: Likewise.
* testsuite/ld-i386/no-plt-1b.rd: Likewise.
* testsuite/ld-i386/no-plt-1c.dd: Likewise.
* testsuite/ld-i386/no-plt-1c.rd: Likewise.
* testsuite/ld-i386/no-plt-1d.dd: Likewise.
* testsuite/ld-i386/no-plt-1d.rd: Likewise.
* testsuite/ld-i386/no-plt-1e.dd: Likewise.
* testsuite/ld-i386/no-plt-1e.rd: Likewise.
* testsuite/ld-i386/no-plt-1f.dd: Likewise.
* testsuite/ld-i386/no-plt-1f.rd: Likewise.
* testsuite/ld-i386/no-plt-1g.dd: Likewise.
* testsuite/ld-i386/no-plt-1g.rd: Likewise.
* testsuite/ld-i386/no-plt-1h.dd: Likewise.
* testsuite/ld-i386/no-plt-1h.rd: Likewise.
* testsuite/ld-i386/no-plt-1i.dd: Likewise.
* testsuite/ld-i386/no-plt-1i.rd: Likewise.
* testsuite/ld-i386/no-plt-1j.dd: Likewise.
* testsuite/ld-i386/no-plt-1j.rd: Likewise.
* testsuite/ld-i386/no-plt-check1a.S: Likewise.
* testsuite/ld-i386/no-plt-check1b.S: Likewise.
* testsuite/ld-i386/no-plt-extern1a.S: Likewise.
* testsuite/ld-i386/no-plt-extern1b.S: Likewise.
* testsuite/ld-i386/no-plt-func1.c: Likewise.
* testsuite/ld-i386/no-plt-main1.c: Likewise.
* testsuite/ld-i386/no-plt.exp: Likewise.
We can generate i386 TLS code sequences for general and local dynamic
models without PLT, which uses indirect call via GOT:
call *___tls_get_addr@GOT(%reg)
where EBX register isn't required as GOT base, instead of direct call:
call ___tls_get_addr[@PLT]
which requires EBX register as GOT base.
Since direct call is 4-byte long and indirect call, is 5-byte long, the
extra one byte must be handled properly.
For general dynamic model, 7-byte lea instruction before call instruction
is replaced by 6-byte one to make room for indirect call. For local
dynamic model, we simply use 5-byte indirect call.
TLS linker optimization is updated to recognize new instruction patterns.
For local dynamic model to local exec model transition, we generate
a 6-byte lea instruction as nop, instead of a 1-byte nop plus a 4-byte
lea instruction. Since linker may convert
call ___tls_get_addr[@PLT]
to
addr32 call ____tls_get_addr
when producing static executable, both patterns are recognized.
bfd/
* elf64-i386.c (elf_i386_link_hash_entry): Add tls_get_addr.
(elf_i386_link_hash_newfunc): Initialize tls_get_addr to 2.
(elf_i386_check_tls_transition): Check indirect call and direct
call with the addr32 prefix for general and local dynamic models.
Set the tls_get_addr feild.
(elf_i386_convert_load_reloc): Always use addr32 prefix for
indirect ___tls_get_addr call via GOT.
(elf_i386_relocate_section): Handle GD->LE, GD->IE and LD->LE
transitions with indirect call and direct call with the addr32
prefix.
ld/
* testsuite/ld-i386/i386.exp: Run libtlspic2.so, tlsbin2,
tlsgd3, tlsld2, tlsgd4, tlspie3a, tlspie3b and tlspie3c.
* testsuite/ld-i386/pass.out: New file.
* testsuite/ld-i386/tls-def1.c: Likewise.
* testsuite/ld-i386/tls-gd1.S: Likewise.
* testsuite/ld-i386/tls-ld1.S: Likewise.
* testsuite/ld-i386/tls-main1.c: Likewise.
* testsuite/ld-i386/tls.exp: Likewise.
* testsuite/ld-i386/tlsbin2-nacl.rd: Likewise.
* testsuite/ld-i386/tlsbin2.dd: Likewise.
* testsuite/ld-i386/tlsbin2.rd: Likewise.
* testsuite/ld-i386/tlsbin2.sd: Likewise.
* testsuite/ld-i386/tlsbin2.td: Likewise.
* testsuite/ld-i386/tlsbinpic2.s: Likewise.
* testsuite/ld-i386/tlsgd3.dd: Likewise.
* testsuite/ld-i386/tlsgd3.s: Likewise.
* testsuite/ld-i386/tlsgd4.d: Likewise.
* testsuite/ld-i386/tlsgd4.s: Likewise.
* testsuite/ld-i386/tlsld2.s: Likewise.
* testsuite/ld-i386/tlspic2-nacl.rd: Likewise.
* testsuite/ld-i386/tlspic2.dd: Likewise.
* testsuite/ld-i386/tlspic2.rd: Likewise.
* testsuite/ld-i386/tlspic2.sd: Likewise.
* testsuite/ld-i386/tlspic2.td: Likewise.
* testsuite/ld-i386/tlspic3.s: Likewise.
* testsuite/ld-i386/tlspie3.s: Likewise.
* testsuite/ld-i386/tlspie3a.d: Likewise.
* testsuite/ld-i386/tlspie3b.d: Likewise.
* testsuite/ld-i386/tlspie3c.d: Likewise.
To call an external function, the direct branch to the PLT entry can be
replaced by an indirect branch via the GOT slot, which is similar to the
first instruction in the PLT slot. Instead using the PLT slot as function
address, the function address is retrieved from the GOT slot. If linker
determines the function is defined locally, it converts indirect branch
via the GOT slot to direct branch with a nop prefix and converts load via
the GOT slot to load immediate or lea,
* testsuite/ld-x86-64/libno-plt-1b.dd: Likewise.
* testsuite/ld-x86-64/libno-plt-1b.rd: Likewise.
* testsuite/ld-x86-64/no-plt-1a.dd: Likewise.
* testsuite/ld-x86-64/no-plt-1a.rd: Likewise.
* testsuite/ld-x86-64/no-plt-1b.dd: Likewise.
* testsuite/ld-x86-64/no-plt-1b.rd: Likewise.
* testsuite/ld-x86-64/no-plt-1c.dd: Likewise.
* testsuite/ld-x86-64/no-plt-1c.rd: Likewise.
* testsuite/ld-x86-64/no-plt-1d.dd: Likewise.
* testsuite/ld-x86-64/no-plt-1d.rd: Likewise.
* testsuite/ld-x86-64/no-plt-1e.dd: Likewise.
* testsuite/ld-x86-64/no-plt-1e.rd: Likewise.
* testsuite/ld-x86-64/no-plt-1f.dd: Likewise.
* testsuite/ld-x86-64/no-plt-1f.rd: Likewise.
* testsuite/ld-x86-64/no-plt-1g.dd: Likewise.
* testsuite/ld-x86-64/no-plt-1g.rd: Likewise.
* testsuite/ld-x86-64/no-plt-check1.S: Likewise.
* testsuite/ld-x86-64/no-plt.exp: Likewise.
* testsuite/ld-x86-64/no-plt-extern1.S: Likewise.
* testsuite/ld-x86-64/no-plt-func1.c: Likewise.
* testsuite/ld-x86-64/no-plt-main1.c: Likewise.
Revert the addition of `ft32-*-*' to this test case made with commit
d1f70bdcab ("Fix lots of linker testsuite failures for the FT32
target.") as this case scores an XPASS now.
ld/
* testsuite/ld-elf/init-fini-arrays.d: Remove `ft32-*-*' xfail.
Embedding the .plt section in another revealed a bug in the way the
larl operand of the first magic plt entry is being calculated. Fixed
with the attached patch.
bfd/ChangeLog:
* elf64-s390.c (elf_s390_finish_dynamic_sections): Subtract plt
section offset when calculation the larl operand in the first PLT
entry.
ld/ChangeLog:
* testsuite/ld-s390/pltoffset-1.dd: New test.
* testsuite/ld-s390/pltoffset-1.ld: New test.
* testsuite/ld-s390/pltoffset-1.s: New test.
* testsuite/ld-s390/s390.exp: Run new test.
VLE is an encoding, not a particular processor architecture, so it
isn't really proper to select insns based on PPC_OPCODE_VLE. For
example
{"evaddw", VX (4, 512), VX_MASK, PPCSPE|PPCVLE, PPCNONE, {RS, RA, RB}},
{"vaddubs", VX (4, 512), VX_MASK, PPCVEC|PPCVLE, PPCNONE, {VD, VA, VB}},
shows two insns that have the same encoding, both available with VLE.
Enabling both with VLE means we can't disassemble the second variant
even if -Maltivec is given rather than -Mspe. Also, we don't check
user assembly against the processor type as well as we could.
Another problem is that when using the VLE encoding, insns from the
main ppc opcode table are not available, except those using opcode 4
and 31. Correcting this revealed two errors in the ld testsuite,
use of "nop" and "rfmci" when -mvle.
This patch fixes those problems in the opcode table, and removes
PPCNONE. I find a plain 0 distracts less from other values.
In addition, I've implemented code to recognize some machine values
from the apuinfo note present in ppc32 objects. It's not a complete
disambiguation since we're lacking info to detect newer chips, but
what we have should help with disassembly.
include/
* elf/ppc.h (APUINFO_SECTION_NAME, APUINFO_LABEL, PPC_APUINFO_ISEL,
PPC_APUINFO_PMR, PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK,
PPC_APUINFO_SPE, PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK,
PPC_APUINFO_VLE: Define.
opcodes/
* ppc-dis.c (ppc_opts): Delete extraneous parentheses. Default
cpu for "vle" to e500.
* ppc-opc.c (ALLOW8_SPRG): Remove PPC_OPCODE_VLE.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW, DCBT_EO): Likewise.
(PPCNONE): Delete, substitute throughout.
(powerpc_opcodes): Remove PPCVLE from "flags". Add to "deprecated"
except for major opcode 4 and 31.
(vle_opcodes <se_rfmci>): Add PPCRFMCI to flags.
bfd/
* cpu-powerpc.c (powerpc_compatible): Allow bfd_mach_ppc_vle entry
to match other 32-bit archs.
* elf32-ppc.c (_bfd_elf_ppc_set_arch): New function.
(ppc_elf_object_p): Call it.
(ppc_elf_special_sections): Use APUINFO_SECTION_NAME. Fix
overlong line.
(APUINFO_SECTION_NAME, APUINFO_LABEL): Don't define here.
* elf64-ppc.c (ppc64_elf_object_p): Call _bfd_elf_ppc_set_arch.
* bfd-in.h (_bfd_elf_ppc_at_tls_transform,
_bfd_elf_ppc_at_tprel_transform): Move to..
* elf-bfd.h: ..here.
(_bfd_elf_ppc_set_arch): Declare.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (PPC_APUINFO_ISEL, PPC_APUINFO_PMR,
PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK, PPC_APUINFO_SPE,
PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK, PPC_APUINFO_VLE): Don't define.
(ppc_setup_opcodes): Check vle disables powerpc_opcodes overridden
by vle_opcodes, and that vle flag doesn't enable opcodes. Don't
add vle_opcodes twice.
(ppc_cleanup): Use APUINFO_SECTION_NAME and APUINFO_LABEL.
ld/
* testsuite/ld-powerpc/apuinfo1.s: Delete nop.
* testsuite/ld-powerpc/apuinfo-vle2.s: New.
* testsuite/ld-powerpc/powerpc.exp: Use apuinfo-vle2.s.
We can generate x86-64 TLS code sequences for general and local dynamic
models without PLT, which uses indirect call via GOT:
call *__tls_get_addr@GOTPCREL(%rip)
instead of direct call:
call __tls_get_addr[@PLT]
Since direct call is 4-byte long and indirect call, is 5-byte long, the
extra one byte must be handled properly.
For general dynamic model, one 0x66 prefix before call instruction is
removed to make room for indirect call. For local dynamic model, we
simply use 5-byte indirect call.
TLS linker optimization is updated to recognize new instruction patterns.
For local dynamic model to local exec model transition, we generate
4 0x66 prefixes, instead of 3, before mov instruction in 64-bit and
generate a 5-byte nop, instead of 4-byte, before mov instruction in
32-bit. Since linker may convert
call *__tls_get_addr@GOTPCREL(%rip)
to
addr32 call __tls_get_addr
when producing static executable, both patterns are recognized.
bfd/
* elf64-x86-64.c (elf_x86_64_link_hash_entry): Add tls_get_addr.
(elf_x86_64_link_hash_newfunc): Initialize tls_get_addr to 2.
(elf_x86_64_check_tls_transition): Check indirect call and
direct call with the addr32 prefix for general and local dynamic
models. Set the tls_get_addr feild.
(elf_x86_64_convert_load_reloc): Always use addr32 prefix for
indirect __tls_get_addr call via GOT.
(elf_x86_64_relocate_section): Handle GD->LE, GD->IE and LD->LE
transitions with indirect call and direct call with the addr32
prefix.
ld/
* testsuite/ld-x86-64/pass.out: New file.
* testsuite/ld-x86-64/tls-def1.c: Likewise.
* testsuite/ld-x86-64/tls-gd1.S: Likewise.
* testsuite/ld-x86-64/tls-ld1.S: Likewise.
* testsuite/ld-x86-64/tls-main1.c: Likewise.
* testsuite/ld-x86-64/tls.exp: Likewise.
* testsuite/ld-x86-64/tlsbin2-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsbin2.dd: Likewise.
* testsuite/ld-x86-64/tlsbin2.rd: Likewise.
* testsuite/ld-x86-64/tlsbin2.sd: Likewise.
* testsuite/ld-x86-64/tlsbin2.td: Likewise.
* testsuite/ld-x86-64/tlsbinpic2.s: Likewise.
* testsuite/ld-x86-64/tlsgd10.dd: Likewise.
* testsuite/ld-x86-64/tlsgd10.s: Likewise.
* testsuite/ld-x86-64/tlsgd11.dd: Likewise.
* testsuite/ld-x86-64/tlsgd11.s: Likewise.
* testsuite/ld-x86-64/tlsgd12.d: Likewise.
* testsuite/ld-x86-64/tlsgd12.s: Likewise.
* testsuite/ld-x86-64/tlsgd13.d: Likewise.
* testsuite/ld-x86-64/tlsgd13.s: Likewise.
* testsuite/ld-x86-64/tlsgd14.dd: Likewise.
* testsuite/ld-x86-64/tlsgd14.s: Likewise.
* testsuite/ld-x86-64/tlsgd5c.s: Likewise.
* testsuite/ld-x86-64/tlsgd6c.s: Likewise.
* testsuite/ld-x86-64/tlsgd9.dd: Likewise.
* testsuite/ld-x86-64/tlsgd9.s: Likewise.
* testsuite/ld-x86-64/tlsld4.dd: Likewise.
* testsuite/ld-x86-64/tlsld4.s: Likewise.
* testsuite/ld-x86-64/tlsld5.dd: Likewise.
* testsuite/ld-x86-64/tlsld5.s: Likewise.
* testsuite/ld-x86-64/tlsld6.dd: Likewise.
* testsuite/ld-x86-64/tlsld6.s: Likewise.
* testsuite/ld-x86-64/tlspic2-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlspic2.dd: Likewise.
* testsuite/ld-x86-64/tlspic2.rd: Likewise.
* testsuite/ld-x86-64/tlspic2.sd: Likewise.
* testsuite/ld-x86-64/tlspic2.td: Likewise.
* testsuite/ld-x86-64/tlspic3.s: Likewise.
* testsuite/ld-x86-64/tlspie2.s: Likewise.
* testsuite/ld-x86-64/tlspie2a.d: Likewise.
* testsuite/ld-x86-64/tlspie2b.d: Likewise.
* testsuite/ld-x86-64/tlspie2c.d: Likewise.
* testsuite/ld-x86-64/tlsgd5.dd: Updated.
* testsuite/ld-x86-64/tlsgd6.dd: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run libtlspic2.so, tlsbin2,
tlsgd5b, tlsgd6b, tlsld4, tlsld5, tlsld6, tlsgd9, tlsgd10,
tlsgd11, tlsgd14, tlsgd12, tlsgd13, tlspie2a, tlspie2b and
tlspie2c.
bfd/
* coff-z8k.c (extra_case): Fix range check for R_JR relocation.
ld/
* ld/testsuite/ld-z8k/0filler.s: New file.
* ld/testsuite/ld-z8k/branch-target.s: New file.
* ld/testsuite/ld-z8k/branch-target2.s: New file.
* ld/testsuite/ld-z8k/calr-back-8001.d: New file.
* ld/testsuite/ld-z8k/calr-back-8002.d: New file.
* ld/testsuite/ld-z8k/calr-back-fail-8001.d: New file.
* ld/testsuite/ld-z8k/calr-back-fail-8002.d: New file.
* ld/testsuite/ld-z8k/calr-forw-8001.d: New file.
* ld/testsuite/ld-z8k/calr-forw-8002.d: New file.
* ld/testsuite/ld-z8k/calr-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/calr-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/calr-opcode.s: New file.
* ld/testsuite/ld-z8k/dbjnz-forw-8001.d: New file.
* ld/testsuite/ld-z8k/dbjnz-forw-8002.d: New file.
* ld/testsuite/ld-z8k/dbjnz-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/dbjnz-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/dbjnz-opcode.s: New file.
* ld/testsuite/ld-z8k/djnz-back-8001.d: New file.
* ld/testsuite/ld-z8k/djnz-back-8002.d: New file.
* ld/testsuite/ld-z8k/djnz-back-fail-8001.d: New file.
* ld/testsuite/ld-z8k/djnz-back-fail-8002.d: New file.
* ld/testsuite/ld-z8k/djnz-forw-8001.d: New file.
* ld/testsuite/ld-z8k/djnz-forw-8002.d: New file.
* ld/testsuite/ld-z8k/djnz-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/djnz-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/djnz-opcode.s: New file.
* ld/testsuite/ld-z8k/filler.s: New file.
* ld/testsuite/ld-z8k/jr-back-8001.d: New file.
* ld/testsuite/ld-z8k/jr-back-8002.d: New file.
* ld/testsuite/ld-z8k/jr-back-fail-8001.d: New file.
* ld/testsuite/ld-z8k/jr-back-fail-8002.d: New file.
* ld/testsuite/ld-z8k/jr-forw-8001.d: New file.
* ld/testsuite/ld-z8k/jr-forw-8002.d: New file.
* ld/testsuite/ld-z8k/jr-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/jr-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/jr-opcode.s: New file.
* ld/testsuite/ld-z8k/ldr-back-8001.d: New file.
* ld/testsuite/ld-z8k/ldr-back-8002.d: New file.
* ld/testsuite/ld-z8k/ldr-back-fail-8001.d: New file.
* ld/testsuite/ld-z8k/ldr-back-fail-8002.d: New file.
* ld/testsuite/ld-z8k/ldr-forw-8001.d: New file.
* ld/testsuite/ld-z8k/ldr-forw-8002.d: New file.
* ld/testsuite/ld-z8k/ldr-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/ldr-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/ldr-opcode.s: New file.
* ld/testsuite/ld-z8k/ldrb-forw-8001.d: New file.
* ld/testsuite/ld-z8k/ldrb-forw-8002.d: New file.
* ld/testsuite/ld-z8k/ldrb-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/ldrb-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/ldrb-opcode.s: New file.
* ld/testsuite/ld-z8k/ldrb-opcode2.s: New file.
* ld/testsuite/ld-z8k/other-file.s: New file.
* ld/testsuite/ld-z8k/reloc.dd: New file.
* ld/testsuite/ld-z8k/reloc.ld: New file.
* ld/testsuite/ld-z8k/relocseg.dd: New file.
* ld/testsuite/ld-z8k/relocseg.ld: New file.
* ld/testsuite/ld-z8k/relocseg1.dd: New file.
* ld/testsuite/ld-z8k/test-ld.sh: New file.
* ld/testsuite/ld-z8k/this-file.s: New file.
* ld/testsuite/ld-z8k/z8k.exp: New file.
Fix internal errors like:
ld: BFD (GNU Binutils) 2.26.51.20160526 internal error, aborting at .../bfd/elfxx-mips.c:10278 in _bfd_mips_elf_relocate_section
ld: Please report this bug.
triggered by the `bfd_reloc_outofrange' condition on branch relocations.
bfd/
* elfxx-mips.c (b_reloc_p): New function.
(_bfd_mips_elf_relocate_section) <bfd_reloc_outofrange>: Handle
branch relocations.
ld/
* testsuite/ld-mips-elf/unaligned-branch.d: New test.
* testsuite/ld-mips-elf/unaligned-branch.s: New test source.
* testsuite/ld-mips-elf/unaligned-text.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
The original MIPS SVR4 psABI defines the calculation for the R_MIPS_26
relocation in a complex way, as follows[1]:
Name Value Field Symbol Calculation
R_MIPS_26 4 T-targ26 local (((A << 2) | \
(P & 0xf0000000)) + S) >> 2
4 T-targ26 external (sign-extend(A << 2) + S) >> 2
This is further clarified, by correcting typos (already applied in the
excerpt above) in the 64-bit psABI extension[2]. A note is included in
both documents to specify that for the purpose of relocation processing
a local symbol is one with binding STB_LOCAL and type STT_SECTION, and
otherwise, a symbol is external.
We have both calculations implemented for the R_MIPS_26 relocation, and
by extension also for the R_MIPS16_26 and R_MICROMIPS_26_S1 relocations,
from now on collectively called jump relocations. However our code uses
a different condition to tell local and external symbols apart, that is
it only checks for the STB_LOCAL binding and ignores the symbol type,
however for REL relocations only. The external calculation is used for
all RELA jump relocations.
In reality the difference matters for jump relocations referring local
MIPS16 and, as from recent commit 44d3da2338 ("MIPS/GAS: Treat local
jump relocs the same no matter if REL or RELA"), also local microMIPS
symbols. Such relocations are not converted to refer to corresponding
section symbols instead and retain the original local symbol reference.
It can be inferred from the relocation calculation definitions that the
addend is effectively unsigned for the local case and explicitly signed
for the external case. With the REL relocation format it makes sense
given the limited range provided for by the field being relocated: the
use of an unsigned addend expands the range by one bit for the local
case, because a negative offset from a section symbol makes no sense,
and any usable negative offset from the original local symbol will have
worked out positive if converted to a section-relative reference. In
the external case a signed addend gives more flexibility as offsets both
negative and positive can be used with a symbol. Any such offsets will
typically have a small value.
The inclusion of the (P & 0xf0000000) component, ORed in the calculation
in the local case, seems questionable as bits 31:28 are not included in
the relocatable field and are masked out as the relocation is applied.
Their value is therefore irrelevant for output processing, the relocated
field ends up the same regardless of their value. They could be used
for overflow detection, however this is precluded by adding them to bits
31:28 of the symbol referred, as the sum will not correspond to the
value calculated by the processor at run time whenever bits 31:28 of the
symbol referred are not all zeros, even though it is valid as long they
are the same as bits 31:28 of P.
We deal with this problem by ignoring any overflow resulting from the
local calculation. This however makes us miss genuine overflow cases,
where 31:28 of the symbol referred are different from bits 31:28 of P,
and non-functional code is produced.
Given the situation, for the purpose of overflow detection we can change
our code to follow the original psABI and only treat the in-place addend
as unsigned in the section symbol case, permitting jumps to offsets
128MiB and above into section. Sections so large may be uncommon, but
still a reasonable use case. On the other hand such large offsets from
regular local symbols are not expected and it makes sense to support
(possibly small) negative offsets instead, also in consistency with what
we do for global symbols.
Drop the (P & 0xf0000000) component then, treat the addend as signed
with local non-section symbols and also detect an overflow in the result
of such calculation with local symbols. NB it does not affect the value
computed for the relocatable field, it only affects overflow detection.
References:
[1] "SYSTEM V APPLICATION BINARY INTERFACE, MIPS RISC Processor
Supplement, 3rd Edition", Figure 4-11: "Relocation Types", p. 4-19
<http://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf>
[2] "64-bit ELF Object File Specification, Draft Version 2.5", Table 32
"Relocation Types", p. 45
<http://techpubs.sgi.com/library/manuals/4000/007-4658-001/pdf/007-4658-001.pdf>
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation): <R_MIPS16_26>
<R_MIPS_26, R_MICROMIPS_26_S1>: Drop the region bits of the
reloc location from calculation, treat the addend as signed with
local non-section symbols and enable overflow detection.
ld/
* testsuite/ld-mips-elf/jal-global-overflow-0.d: New test.
* testsuite/ld-mips-elf/jal-global-overflow-1.d: New test.
* testsuite/ld-mips-elf/jal-local-overflow-0.d: New test.
* testsuite/ld-mips-elf/jal-local-overflow-1.d: New test.
* testsuite/ld-mips-elf/jal-global-overflow.s: New test source.
* testsuite/ld-mips-elf/jal-local-overflow.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
On RELA targets the addend can affect JALX target's alignment, so only
verify it once the whole relocation calculation has completed.
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation) <R_MIPS16_26>
<R_MIPS_26, R_MICROMIPS_26_S1>: Include the addend in JALX's
target alignment verification.
ld/
* testsuite/ld-mips-elf/unaligned-jalx-addend-0.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-1.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-mips16-0.d: New
test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-mips16-1.d: New
test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-micromips-0.d: New
test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-micromips-1.d: New
test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-0.s: New test
source.
* testsuite/ld-mips-elf/unaligned-jalx-addend-1.s: New test
source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Symbol table entries for section symbols are different between IRIX and
traditional MIPS ELF targets in that IRIX entries have their `st_name'
member pointing at the section's name in the string table section, while
traditional entries have 0 there and the section header string table has
to be referred via the relevant section header's `shn_name' member
instead.
This is chosen with the `elf_backend_name_local_section_symbols' backend
and can be observed with `readelf -s' output for an IRIX object:
Symbol table '.symtab' contains 12 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00000000 0 SECTION LOCAL DEFAULT 1 .text
2: 00000000 0 SECTION LOCAL DEFAULT 3 .data
3: 00000000 0 SECTION LOCAL DEFAULT 4 .bss
4: 00000000 0 SECTION LOCAL DEFAULT 5 .reginfo
5: 00000000 0 SECTION LOCAL DEFAULT 6 .MIPS.abiflags
6: 00000000 0 SECTION LOCAL DEFAULT 7 .pdr
7: 00000000 0 SECTION LOCAL DEFAULT 9 .gnu.attributes
8: 00002000 16 FUNC GLOBAL DEFAULT 1 foo
9: 00004008 0 FUNC LOCAL DEFAULT 1 abar
10: 00002008 0 FUNC LOCAL DEFAULT 1 afoo
11: 00004000 16 FUNC GLOBAL DEFAULT 1 bar
and a corresponding traditional object:
Symbol table '.symtab' contains 12 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00000000 0 SECTION LOCAL DEFAULT 1
2: 00000000 0 SECTION LOCAL DEFAULT 3
3: 00000000 0 SECTION LOCAL DEFAULT 4
4: 00004008 0 FUNC LOCAL DEFAULT 1 abar
5: 00002008 0 FUNC LOCAL DEFAULT 1 afoo
6: 00000000 0 SECTION LOCAL DEFAULT 5
7: 00000000 0 SECTION LOCAL DEFAULT 6
8: 00000000 0 SECTION LOCAL DEFAULT 7
9: 00000000 0 SECTION LOCAL DEFAULT 9
10: 00002000 16 FUNC GLOBAL DEFAULT 1 foo
11: 00004000 16 FUNC GLOBAL DEFAULT 1 bar
respectively. Consequently the right way to retrieve a section symbol's
name has to be chosen in `mips_elf_calculate_relocation' for the purpose
of error reporting.
Originally we produced symbol tables in the traditional object format
only and we handled it correctly until it was lost in a rewrite with:
commit 7403cb6305
Author: Mark Mitchell <mark@codesourcery.com>
Date: Wed Jun 30 20:13:43 1999 +0000
probably because of the extra pointer indirection added which made the
same expression have a different meaning.
With the addition of IRIX symbol table format with:
commit 174fd7f955
Author: Richard Sandiford <rdsandiford@googlemail.com>
Date: Mon Feb 9 08:04:00 2004 +0000
the bug has been partially covered and now when a relocation error is
triggered with an IRIX object the offending section symbol is correctly
reported:
tmpdir/dump0.o: In function `foo':
(.text+0x2000): relocation truncated to fit: R_MIPS_26 against `.text'
tmpdir/dump0.o: In function `bar':
(.text+0x4000): relocation truncated to fit: R_MIPS_26 against `.text'
because `bfd_elf_string_from_elf_section' retrieves the name from the
string table section. With a traditional object however the function
returns an empty string and consequently `no symbol' is printed instead:
tmpdir/dump0.o: In function `foo':
(.text+0x2000): relocation truncated to fit: R_MIPS_26 against `no symbol'
tmpdir/dump0.o: In function `bar':
(.text+0x4000): relocation truncated to fit: R_MIPS_26 against `no symbol'
Restore the original semantics so that the section name is always
correctly retrieved.
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation): Also use the
section name if `bfd_elf_string_from_elf_section' returns an
empty string.
ld/
* testsuite/ld-mips-elf/reloc-local-overflow.d: New test.
* testsuite/ld-mips-elf/reloc-local-overflow.s: Source for the
new test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
Upon a `bfd_reloc_outofrange' error continue processing so that any
further issues are also reported, similarly to how `bfd_reloc_overflow'
is handled. Adjust message formatting accordingly, using `%X' to abort
processing at conclusion.
Reduce the number of test cases by grouping relocations the handling of
which can now be verified together with a single source and dump.
bfd/
* elfxx-mips.c (_bfd_mips_elf_relocate_section)
<bfd_reloc_outofrange>: Use the `%X%H' rather than `%C' format
for message. Continue processing rather than returning failure.
ld/
* testsuite/ld-mips-elf/unaligned-jalx-0.d: Fold
`unaligned-jalx-2' here.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-0.d: Fold
`unaligned-jalx-mips16-2' here.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-0.d: Fold
`unaligned-jalx-micromips-2' here.
* testsuite/ld-mips-elf/unaligned-jalx-0.s: Update accordingly.
* testsuite/ld-mips-elf/unaligned-jalx-1.d: Update error
message.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-2.d: Remove test.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-2.d: Remove test.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-2.d: Remove
test.
* testsuite/ld-mips-elf/unaligned-jalx-2.s: Remove test source.
* testsuite/ld-mips-elf/unaligned-lwpc-0.d: Fold
`unaligned-lwpc-3' here.
* testsuite/ld-mips-elf/unaligned-lwpc-0.s: Update accordingly.
* testsuite/ld-mips-elf/unaligned-lwpc-1.d: Fold
`unaligned-lwpc-2' here.
* testsuite/ld-mips-elf/unaligned-lwpc-1.s: Update accordingly.
* testsuite/ld-mips-elf/unaligned-lwpc-2.d: Remove test.
* testsuite/ld-mips-elf/unaligned-lwpc-2.s: Remove test source.
* testsuite/ld-mips-elf/unaligned-lwpc-3.d: Remove test.
* testsuite/ld-mips-elf/unaligned-lwpc-3.s: Remove test source.
* testsuite/ld-mips-elf/unaligned-ldpc-0.d: Fold
`unaligned-ldpc-4' here.
* testsuite/ld-mips-elf/unaligned-ldpc-0.s: Update accordingly.
* testsuite/ld-mips-elf/unaligned-ldpc-1.d: Update error
message. Fold `unaligned-ldpc-2' and `unaligned-ldpc-3' here.
* testsuite/ld-mips-elf/unaligned-ldpc-1.s: Update accordingly.
* testsuite/ld-mips-elf/unaligned-ldpc-2.d: Remove test.
* testsuite/ld-mips-elf/unaligned-ldpc-2.s: Remove test source.
* testsuite/ld-mips-elf/unaligned-ldpc-3.d: Remove test.
* testsuite/ld-mips-elf/unaligned-ldpc-3.s: Remove test source.
* testsuite/ld-mips-elf/unaligned-ldpc-4.d: Remove test.
* testsuite/ld-mips-elf/unaligned-ldpc-4.s: Remove test source.
* testsuite/ld-mips-elf/mips-elf.exp: Delete removed tests.
A `bfd_reloc_outofrange' condition from `mips_elf_calculate_relocation'
currently triggers the warning callback, which in the case of LD prints
messages like:
foo.o: In function `foo':
(.text+0x0): warning: JALX to a non-word-aligned address
or:
foo.o: In function `foo':
(.text+0x0): warning: PC-relative load from unaligned address
and nothing else, which suggests this is a benign condition and link has
otherwise successfully run to completion. This is however not the case,
the link terminates right away with no further messages and no output
produced.
Use the general error or warning info callback then, preserving the
message format. Also set a BFD error condition so that a failure is
unambiguously reported. Complement the change with a set of suitable
test suite additions.
bfd/
* elfxx-mips.c (_bfd_mips_elf_relocate_section)
<bfd_reloc_outofrange>: Call `->einfo' rather than `->warning'.
Call `bfd_set_error'.
ld/
* testsuite/ld-mips-elf/unaligned-jalx-0.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-1.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-2.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-0.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-1.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-2.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-0.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-1.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-2.d: New test.
* testsuite/ld-mips-elf/unaligned-lwpc-0.d: New test.
* testsuite/ld-mips-elf/unaligned-lwpc-1.d: New test.
* testsuite/ld-mips-elf/unaligned-lwpc-2.d: New test.
* testsuite/ld-mips-elf/unaligned-lwpc-3.d: New test.
* testsuite/ld-mips-elf/unaligned-ldpc-0.d: New test.
* testsuite/ld-mips-elf/unaligned-ldpc-1.d: New test.
* testsuite/ld-mips-elf/unaligned-ldpc-2.d: New test.
* testsuite/ld-mips-elf/unaligned-ldpc-3.d: New test.
* testsuite/ld-mips-elf/unaligned-ldpc-4.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-0.s: New test source.
* testsuite/ld-mips-elf/unaligned-jalx-1.s: New test source.
* testsuite/ld-mips-elf/unaligned-jalx-2.s: New test source.
* testsuite/ld-mips-elf/unaligned-insn.s: New test source.
* testsuite/ld-mips-elf/unaligned-lwpc-0.s: New test source.
* testsuite/ld-mips-elf/unaligned-lwpc-1.s: New test source.
* testsuite/ld-mips-elf/unaligned-lwpc-2.s: New test source.
* testsuite/ld-mips-elf/unaligned-lwpc-3.s: New test source.
* testsuite/ld-mips-elf/unaligned-ldpc-0.s: New test source.
* testsuite/ld-mips-elf/unaligned-ldpc-1.s: New test source.
* testsuite/ld-mips-elf/unaligned-ldpc-2.s: New test source.
* testsuite/ld-mips-elf/unaligned-ldpc-3.s: New test source.
* testsuite/ld-mips-elf/unaligned-ldpc-4.s: New test source.
* testsuite/ld-mips-elf/unaligned-syms.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
During archive rescan to resolve symbol references for files added by
LTO, linker add_archive_element callback is called to check if an
archive element should added. After all IR symbols have been claimed,
linker won't claim new IR symbols and shouldn't add the LTO archive
element. This patch updates linker add_archive_element callback to
return FALSE when seeing an LTO archive element during rescan and
changes ELF linker to skip such archive element.
bfd/
PR ld/20103
* cofflink.c (coff_link_check_archive_element): Return TRUE if
linker add_archive_element callback returns FALSE.
* ecoff.c (ecoff_link_check_archive_element): Likewise.
* elf64-ia64-vms.c (elf64_vms_link_add_archive_symbols): Skip
archive element if linker add_archive_element callback returns
FALSE.
* elflink.c (elf_link_add_archive_symbols): Likewise.
* pdp11.c (aout_link_check_ar_symbols): Likewise.
* vms-alpha.c (alpha_vms_link_add_archive_symbols): Likewise.
* xcofflink.c (xcoff_link_check_dynamic_ar_symbols): Likewise.
(xcoff_link_check_ar_symbols): Likewise.
ld/
PR ld/20103
* ldmain.c (add_archive_element): Don't claim new IR symbols
after all IR symbols have been claimed.
* plugin.c (plugin_call_claim_file): Remove no_more_claiming
check.
* testsuite/ld-plugin/lto.exp (pr20103): New proc.
Run PR ld/20103 tests.
* testsuite/ld-plugin/pr20103a.c: New file.
* testsuite/ld-plugin/pr20103b.c: Likewise.
* testsuite/ld-plugin/pr20103c.c: Likewise.
Do not convert jump relocs against local MIPS16 or microMIPS symbols to
refer to a section symbol instead even on RELA targets, as it makes it
impossible for the linker to make a JAL to JALX conversion based on ISA
symbol annotation, breaking regular and compressed MIPS interlinking.
gas/
* config/tc-mips.c (mips_fix_adjustable): Also return 0 for
jump relocations against MIPS16 or microMIPS symbols on RELA
targets.
* testsuite/gas/mips/jalx-local.d: New test.
* testsuite/gas/mips/jalx-local-n32.d: New test.
* testsuite/gas/mips/jalx-local-n64.d: New test.
* testsuite/gas/mips/jalx-local.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/jalx-local.d: New test.
* testsuite/ld-mips-elf/jalx-local-n32.d: New test.
* testsuite/ld-mips-elf/jalx-local-n64.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
The microMIPS JALX instruction shares the R_MICROMIPS_26_S1 relocation
with microMIPS J/JAL/JALS instructions, however unlike the latters its
encoded immediate argument is unusually shifted left by 2 rather than 1
in calculating the value used for the operation requested.
We already handle this exception in `mips_elf_calculate_relocation' in
LD, in a scenario where JALX is produced as a result of relaxing JAL for
the purpose of making a cross-mode jump. We also get it right in the
disassembler in `decode_micromips_operand'.
What we don't correctly do however is processing microMIPS JALX produced
by GAS from an assembly source, where a non-zero constant argument or a
symbol reference with a non-zero in-place addend has been used. In this
case the same calculation is made as for microMIPS J/JAL/JALS, causing
the wrong encoding to be produced by GAS on making an object file, and
then again by LD in the final link. The latter in particular causes the
calculation, where the addend fits in the relocatable field, to produce
different final addresses for the same source code depending on whether
REL or RELA relocations are used.
Correct these issues by special-casing microMIPS JALX in the places that
have been previously missed.
bfd/
* elfxx-mips.c (mips_elf_read_rel_addend): Adjust the addend for
microMIPS JALX.
gas/
* config/tc-mips.c (append_insn): Correct the encoding of a
constant argument for microMIPS JALX.
(tc_gen_reloc): Correct the encoding of an in-place addend for
microMIPS JALX.
* testsuite/gas/mips/jalx-addend.d: New test.
* testsuite/gas/mips/jalx-addend-n32.d: New test.
* testsuite/gas/mips/jalx-addend-n64.d: New test.
* testsuite/gas/mips/jalx-imm.d: New test.
* testsuite/gas/mips/jalx-imm-n32.d: New test.
* testsuite/gas/mips/jalx-imm-n64.d: New test.
* testsuite/gas/mips/jalx-addend.s: New test source.
* testsuite/gas/mips/jalx-imm.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/jalx-addend.d: New test.
* testsuite/ld-mips-elf/jalx-addend-n32.d: New test.
* testsuite/ld-mips-elf/jalx-addend-n64.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Don't convert R_386_GOT32 since we can't tell if it is applied
to "mov $foo@GOT, %reg" which isn't a load via GOT.
bfd/
PR ld/20117
* elf32-i386.c (elf_i386_convert_load_reloc): Don't check
R_386_GOT32X.
(elf_i386_convert_load): Don't convert R_386_GOT32.
ld/
PR ld/20117
* testsuite/ld-i386/i386.exp: Run pr20117.
* testsuite/ld-i386/pr19609-1i.d: Updated.
* testsuite/ld-i386/pr20117.d: New file.
* testsuite/ld-i386/pr20117.s: Likewise.
A different set of hacks to make the crossref tests pass on powerpc64
and powerpc64le.
* testsuite/ld-scripts/crossref.exp: Remove -mcall-aixdesc hack.
* testsuite/ld-scripts/cross2.t: Tweak .opd and .toc placement.
* testsuite/ld-scripts/cross3.t: Likewise.
* testsuite/ld-scripts/cross4.t: Likewise.
* testsuite/ld-scripts/cross5.t: Likewise.
* testsuite/ld-scripts/cross6.t: Likewise.
* testsuite/ld-scripts/cross7.t: Likewise.
Tweaks to make it easier to re-run these testcases by hand.
* testsuite/ld-elf/shared.exp (mix_pic_and_non_pic): Pass in
exe name rather than constructing testname. Fix typo in
sub-test name. Log copying. Use -rpath rather than -R.
* scripttempl/ft32.sc: Use fixed constants for memory region
lengths. Include DWARF debug sections.
(.data .bss): Do not assign locations during relocatable links.
* testsuite/ld-elf/compressed1d.d: Skip for FT32.
* testsuite/ld-elf/sec-to-seg.exp: Likewise.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/ld-elf/init-fini-array.d: XFail for FT32.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/orphan-region.d: Likewise.
* testsuite/ld-elf/orphan.s: Likewise.
* testsuite/ld-elf/orphan3.d: Likewise.
* testsuite/ld-elf/pr349.d: Likewise.
* testsuite/ld-elf/warn2.d: Likewise.
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Note
that the FT32 does not support shared libraries.
The plugin is called to claim symbols in an archive element from
plugin_object_p. But those symbols aren't needed to create output.
They are defined and referenced only within IR. get_symbols should
return resolution based on IR symbol kinds.
PR ld/20070
* Makefile.am (noinst_LTLIBRARIES): Add libldtestplug4.la.
(libldtestplug4_la_SOURCES): New.
(libldtestplug4_la_CFLAGS): Likewise.
(libldtestplug4_la_LDFLAGS): Likewise.
* Makefile.in: Regenerated.
* plugin.c (get_symbols): Return resolution based on IR symbol
kinds for symbols defined/referenced only within IR.
* testplug4.c: New file.
* ld/testsuite/ld-plugin/pr20070.d: Likewise.
* ld/testsuite/ld-plugin/pr20070a.c: Likewise.
* ld/testsuite/ld-plugin/pr20070b.c: Likewise.
* testsuite/ld-plugin/plugin.exp (plugin4_name): New.
(plugin4_path): Likewise.
Add a test for ld/20070.
We don't want this to match .rela.text or similar.
* testsuite/ld-scripts/pr14962-2.t: Match .text, not *.text.
* testsuite/ld-scripts/rgn-at5.t: Similarly, .sec not *.sec.
* testsuite/ld-scripts/section-match-1.t: Likewise.
When a global symbol is defined in COMDAT group, we shouldn't leave an
undefined symbol in symbol table when the symbol section is discarded
unless there is a reference to the symbol outside of COMDAT group.
bfd/
PR ld/17550
* elf-bfd.h (elf_link_hash_entry): Update comments for indx,
documenting that indx == -3 if symbol is defined in a discarded
section.
* elflink.c (elf_link_add_object_symbols): Set indx to -3 if
symbol is defined in a discarded section.
(elf_link_output_extsym): Strip a global symbol defined in a
discarded section.
ld/
PR ld/17550
* testsuite/ld-elf/pr17550-1.s: New file.
* testsuite/ld-elf/pr17550-2.s: Likewise.
* testsuite/ld-elf/pr17550-3.s: Likewise.
* testsuite/ld-elf/pr17550-4.s: Likewise.
* testsuite/ld-elf/pr17550a.d: Likewise.
* testsuite/ld-elf/pr17550b.d: Likewise.
* testsuite/ld-elf/pr17550c.d: Likewise.
* testsuite/ld-elf/pr17550d.d: Likewise.
Some targets are only really, or at least regularly, regression-tested
in a crossed configuration. Currently we only have native compiled test
cases for the STB_GNU_UNIQUE feature in the linker test suite. This is
nice, covering run-time semantics even, but quite often not run at all.
Consequently a regression may remain unnoticed for long.
Add a simple test case then to provide basic linker coverage with no
need for a compiler or a native toolchain.
ld/
* testsuite/ld-unique/unique.d: New test.
* testsuite/ld-unique/unique.exp: Run the new test. Adjust
messages for compiled tests.
binutils* testsuite/lib/binutils-common.exp (is_elf_format): Add avr-*-*.
ld * testsuite/ld-elf/pr18735.d: Allow other symbols.
* testsuite/ld-elf/sec64k.exp: Skip 64ksec for avr.
* testsuite/ld-gc/pr14265.d: Allow other symbols.
* testsuite/ld-plugin/plugin.exp: Add PR ld/17973 to
plugin_tests only if check_shared_lib_support is true.
* testsuite/ld-selective/selective.exp: Add --section-start
flag for avr.
When handling absolute relocations for global symbols bind within the
shared object, AArch64 will generate one dynamic RELATIVE relocation,
but won't apply the value for this absolution relocations at static
linking stage. This is different from AArch64 gold linker and x86-64.
This is not a bug as AArch64 is RELA, there is only guarantee that
relocation addend is placed in the relocation entry. But some
system softwares originally writen for x86-64 might assume AArch64
bfd linker gets the same behavior as x86-64, then they could take
advantage of this buy skipping those RELATIVE dynamic relocations
if the load address is the same as the static linking address.
This patch makes AArch64 BFD linker applies absolution relocations at
static linking stage for scenario described above. Meanwhile old AArch64
android loader has a bug (PR19163) which relies on current linker behavior
as a workaround, so the same option --no-apply-dynamic-relocs added.
There is no need to download source if we aren't on remote host.
Otherwise, each ld test run on local host leaves behind a couple
test files.
* config/default.exp (NOPIE_CFLAGS): Download source only on
remote host.
(NOPIE_LDFLAGS): Likewise.
* testsuite/lib/ld-lib.exp (check_lto_available): Likewise.
(check_lto_fat_available): Likewise.
(check_lto_shared_available): Likewise.
(check_ifunc_available): Likewise.
(check_ifunc_attribute_available): Likewise.
Since not all ELF targets use the elf.em emulation to support ld option:
--compress-debug-sections=zlib-gnu, limit compressed1b.d to Linux/GNU
targets.
* testsuite/ld-elf/compressed1b.d: Only run for Linux/GNU targets.
Skip debug sections when estimating distances between output sections
since compressed_size is used to compress debug sections and debug
sections aren't excluded from distances between output sections.
bfd/
PR ld/20006
* elf64-x86-64.c (elf_x86_64_convert_load): Skip debug sections
when estimating distances between output sections.
ld/
PR ld/20006
* testsuite/ld-elfvsb/elfvsb.exp (COMPRESS_LDFLAG): New.
(visibility_run): Pass COMPRESS_LDFLAG to visibility_test on
ELF targets.
Since ld may generate compressed debug sections by default, pass
--compress-debug-sections=none to ld to avoid compressed debug
sections.
* ld-elf/compressed1b.d: Pass --compress-debug-sections=none
to ld.
* ld-elf/compressed1c.d: Likewise.
Check for LTO availability will hide LTO bugs in ld. Since GCC 4.9 adds
-ffat-lto-objects, we always run LTO tests on Linux with GCC 4.9 or newer.
* testsuite/lib/ld-lib.exp (check_lto_available): Return 1 on
Linux with GCC 4.9 or newer.
(check_lto_fat_available): Likewise.
(check_lto_shared_available): Likewise.
Fixes failures on hppa-linux and alpha-linux due to not merging
.data.* and .sdata into .data. cross3.t modified too since it is the
template for the NOCROSSREFS_TO scripts.
* testsuite/ld-scripts/cross3.t: Add commonly used data
and text section names to output section statements.
* testsuite/ld-scripts/cross4.t: Likewise.
* testsuite/ld-scripts/cross5.t: Likewise.
* testsuite/ld-scripts/cross6.t: Likewise.
* testsuite/ld-scripts/cross7.t: Likewise.
There is no need for run-time relocation when converting pointers
in .eh_frame section to DW_EH_PE_pcrel encoding. R_386_NONE and
R_X86_64_NONE are expected since the space for run-time relocation
has been allocated. This is an optimization.
PR ld/19972
* testsuite/ld-elf/eh6.d: Pass -rW to readelf and check for
R_386_NONE or R_X86_64_NONE.
Since elf_x86_64_check_relocs is called after opening all input files,
we can detect dynamic R_X86_64_32 relocation overflow there.
bfd/
PR ld/19969
* elf64-x86-64.c (check_relocs_failed): New.
(elf_x86_64_need_pic): Moved before elf_x86_64_check_relocs.
Support relocation agaist local symbol. Set check_relocs_failed.
(elf_x86_64_check_relocs): Use elf_x86_64_need_pic. Check
R_X86_64_32 relocation overflow.
(elf_x86_64_relocate_section): Skip if check_relocs failed.
Update one elf_x86_64_need_pic and remove one elf_x86_64_need_pic.
ld/
PR ld/19969
* testsuite/ld-x86-64/pr19969.d: New file.
* testsuite/ld-x86-64/pr19969a.S: Likewise.
* testsuite/ld-x86-64/pr19969b.S: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr19969 tests.
This test checks run-time relocation overflow with GOT relocation and
32-bit relocation against the same symbol.
PR ld/19719
* testsuite/ld-x86-64/pr19719.d: New file.
* testsuite/ld-x86-64/pr19719.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr19719.
NOCROSSREFS_TO is similar to the existing NOCROSSREFS command but only
checks one direction of cross referencing.
ld/ChangeLog
* ld.texinfo: Document NOCROSSREFS_TO script command.
* ldlang.h (struct lang_nocrossrefs): Add onlyfirst field.
(lang_add_nocrossref_to): New prototype.
* ldcref.c (check_local_sym_xref): Use onlyfirst to only look for
symbols defined in the first section.
(check_nocrossref): Likewise.
* ldgram.y (NOCROSSREFS_TO): New script command.
* ldlang.c (lang_add_nocrossref): Set onlyfirst to FALSE.
(lang_add_nocrossref_to): New function.
* ldlex.l (NOCROSSREFS_TO): New token.
* NEWS: Mention NOCROSSREFS_TO.
* testsuite/ld-scripts/cross4.t: New file.
* testsuite/ld-scripts/cross5.t: Likewise.
* testsuite/ld-scripts/cross6.t: Likewise.
* testsuite/ld-scripts/cross7.t: Likewise.
* testsuite/ld-scripts/crossref.exp: Run 4 new NOCROSSREFS_TO
tests.
Add support for arc/nps400 cmem instructions, these load and store
instructions are hard-wired to access "0x57f00000 + 16-bit-offset".
Supporting this relocation required some additions to the arc relocation
handling in the bfd library, as well as the standard changes required to
add a new relocation type.
There's a test of the new instructions in the assembler, and a test of
the relocation in the linker.
bfd/ChangeLog:
* reloc.c: Add BFD_RELOC_ARC_NPS_CMEM16 entry.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-arc.c: Add 'opcode/arc.h' include.
(struct arc_relocation_data): Add symbol_name.
(arc_special_overflow_checks): New function.
(arc_do_relocation): Use arc_special_overflow_checks, reindent as
required, add an extra comment.
(elf_arc_relocate_section): Setup symbol_name in reloc_data.
gas/ChangeLog:
* testsuite/gas/arc/nps400-3.d: New file.
* testsuite/gas/arc/nps400-3.s: New file.
include/ChangeLog:
* elf/arc-reloc.def: Add ARC_NPS_CMEM16 reloc.
* opcode/arc.h (NPS_CMEM_HIGH_VALUE): Define.
ld/ChangeLog:
* testsuite/ld-arc/arc.exp: New file.
* testsuite/ld-arc/nps-1.s: New file.
* testsuite/ld-arc/nps-1a.d: New file.
* testsuite/ld-arc/nps-1b.d: New file.
* testsuite/ld-arc/nps-1b.err: New file.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add xldb, xldw, xld, xstb, xstw, and xst
instructions.
* arc-opc.c (insert_nps_cmem_uimm16): New function.
(extract_nps_cmem_uimm16): New function.
(arc_operands): Add NPS_XLDST_UIMM16 operand.
In some cases a variable could be left uninitialised and then an attempt
made to read this variable, resulting in a tcl error. This commit
initialises the variable in all cases.
ld/ChangeLog:
* testsuite/lib/ld-lib.exp (run_dump_test): Initialise
check_ld(terminal).
Since compiler may pass --as-needed to ld by default, link .o file
before .so file in x86-64 tests.
PR ld/19774
* testsuite/ld-x86-64/x86-64.exp: Link tmpdir/pr17689b.o before
tmpdir/pr17689.so, fix gotpcrel1 test and add more --as-needed
tests.
We shouldn't issue an error for read-only segment with dynamic IFUNC
relocations when dynamic relocations are against normal symbols.
bfd/
PR ld/19939
* elf-bfd.h (_bfd_elf_allocate_ifunc_dyn_relocs): Add a pointer
to bfd_boolean.
* elf-ifunc.c (_bfd_elf_allocate_ifunc_dyn_relocs): Updated.
Set *readonly_dynrelocs_against_ifunc_p to TRUE if dynamic reloc
applies to read-only section.
* elf32-i386.c (elf_i386_link_hash_table): Add
readonly_dynrelocs_against_ifunc.
(elf_i386_allocate_dynrelocs): Updated.
(elf_i386_size_dynamic_sections): Issue an error for read-only
segment with dynamic IFUNC relocations only if
readonly_dynrelocs_against_ifunc is TRUE.
* elf64-x86-64.c (elf_x86_64_link_hash_table): Add
readonly_dynrelocs_against_ifunc.
(elf_x86_64_allocate_dynrelocs): Updated.
(elf_x86_64_size_dynamic_sections): Issue an error for read-only
segment with dynamic IFUNC relocations only if
readonly_dynrelocs_against_ifunc is TRUE.
* elfnn-aarch64.c (elfNN_aarch64_allocate_ifunc_dynrelocs):
Updated.
ld/
PR ld/19939
* testsuite/ld-i386/i386.exp: Run PR ld/19939 tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr19939.s: New file.
* testsuite/ld-i386/pr19939a.d: Likewise.
* testsuite/ld-i386/pr19939b.d: Likewise.
* testsuite/ld-x86-64/pr19939.s: Likewise.
* testsuite/ld-x86-64/pr19939a.d: Likewise.
* testsuite/ld-x86-64/pr19939b.d: Likewise.
This aims to bring the linker for big-endian arc targets into line with
the linker for (the default) little endian arc targets.
The bulk of the changes are to extend the target pattern in the test
files from 'arc-*...' to 'arc*-*...' and so match both big and little
endian arc targets.
In the ld/emulparams/ directory the existing scripts checked for a
variable ARC_ENDIAN to switch between big and little endian targets,
however, this variable is never set up.
So, a new script snippet is introduced which sets up ARC_ENDIAN based on
the value of target, this snippet is then included from all of the
existing arc scripts.
The existing big-endian variants of all the scripts, which existed, but
were never used, are deleted in this commit.
ld/ChangeLog:
* emulparams/arc-endianness.sh: New file.
* emulparams/arcebelf.sh: Deleted.
* emulparams/arcebelf_prof.sh: Deleted.
* emulparams/arceblinux.sh: Deleted.
* emulparams/arceblinux_prof.sh: Deleted.
* emulparams/arcelf.sh: Include arc-endinness.sh.
* emulparams/arcelf_prof.sh: Include arc-endinness.sh.
* emulparams/arclinux.sh: Include arc-endinness.sh.
* emulparams/arclinux_prof.sh: Include arc-endinness.sh.
* emulparams/arcv2elf.sh: Include arc-endinness.sh.
* emulparams/arcv2elfx.sh: Include arc-endinness.sh.
* testsuite/ld-elf/compressed1d.d: Update pattern for big and
little endian arc targets.
* testsuite/ld-elf/eh-frame-hdr.d: Likewise.
* testsuite/ld-elf/group1.d: Likewise.
* testsuite/ld-elf/group3b.d: Likewise.
* testsuite/ld-elf/group8a.d: Likewise.
* testsuite/ld-elf/group8b.d: Likewise.
* testsuite/ld-elf/group9a.d: Likewise.
* testsuite/ld-elf/group9b.d: Likewise.
* testsuite/ld-elf/linkonce2.d: Likewise.
* testsuite/ld-elf/pr12851.d: Likewise.
* testsuite/ld-elf/pr12975.d: Likewise.
* testsuite/ld-elf/pr13177.d: Likewise.
* testsuite/ld-elf/pr13195.d: Likewise.
* testsuite/ld-elf/pr17615.d: Likewise.
* testsuite/ld-elf/pr19162.d: Likewise.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/lib/ld-lib.exp: Likewise.
Always turn hidden and internal symbols which have a dynamic index into
local ones. This is required by the the ELF gABI[1]:
"A hidden symbol contained in a relocatable object must be either
removed or converted to STB_LOCAL binding by the link-editor when the
relocatable object is included in an executable file or shared object."
"An internal symbol contained in a relocatable object must be either
removed or converted to STB_LOCAL binding by the link-editor when the
relocatable object is included in an executable file or shared object."
The ELF linker usually respects this requirement, however in the case
where a dynamic symbol has been preallocated due to a reference of the
default export class aka visibility from the object being linked, and
then merged with a hidden or internal symbol definition from within the
same object, then the original export class is carried over to the
output dynamic symbol table, because while merging the generic ELF
linker only converts affected dynamic symbols to local when they are
defined or referenced by the object being linked and a dynamic object
involved in the link both at a time.
The dynamic symbol produced confuses then the dynamic loader at the run
time -- the hidden or internal export class is ignored and the symbol
follows preemption rules as with the default export class.
In the MIPS target it happens when `mips_elf_record_global_got_symbol'
creates a dynamic symbol when a call relocation is encountered.
Additionally if the undefined symbol referred by such a relocation does
specify the intended export class, then a local dynamic symbol is
created instead, which is harmless and allowed, but useless. Normally
no local dynamic symbols are created, except for a single dummy one at
the beginning.
Correct the problem by removing the extra check for a dynamic symbol
being defined or referenced by the object being linked and a dynamic
object involved in the link both at a time. The test cases included
cover the internal and hidden symbol cases, as well as a protected
symbol for a reference, the handling of which is unchanged by this fix.
Both cases described above are covered, that is where an internal or
hidden dynamic symbol is produced and where a local one is.
NB this change affects CRIS results where some symbols in the static
table produced in a final link are now converted from STV_HIDDEN to
STB_LOCAL. This happens whenever the `elf_backend_hide_symbol' handler
is called, so the affected symbols must have been chosen for entering
into the dynamic symbol table, except in these test cases no such symbol
table is produced. In fully linked binaries the static symbol table is
only used for debugging though, so such a change is fine.
References:
[1] "System V Application Binary Interface - DRAFT - 24 April 2001",
The Santa Cruz Operation, Inc., "Symbol Table",
<http://www.sco.com/developers/gabi/2001-04-24/ch4.symtab.html>
bfd/
PR ld/19908
* elflink.c (elf_link_add_object_symbols): Always turn hidden
and internal symbols which have a dynamic index into local
ones.
ld/
PR ld/19908
* testsuite/ld-cris/tls-e-20.d: Adjust for hidden symbol
handling fix.
* testsuite/ld-cris/tls-e-20a.d: Likewise.
* testsuite/ld-cris/tls-e-21.d: Likewise.
* testsuite/ld-cris/tls-e-23.d: Likewise.
* testsuite/ld-cris/tls-e-80.d: Likewise.
* testsuite/ld-cris/tls-gd-3h.d: Likewise.
* testsuite/ld-cris/tls-leie-19.d: Likewise.
* testsuite/ld-mips-elf/export-class-ref-lib.sd: New test.
* testsuite/ld-mips-elf/export-hidden-ref.sd: New test.
* testsuite/ld-mips-elf/export-internal-ref.sd: New test.
* testsuite/ld-mips-elf/export-protected-ref.sd: New test.
* testsuite/ld-mips-elf/export-class-ref-f0.s: New test source.
* testsuite/ld-mips-elf/export-class-ref-f1.s: New test source.
* testsuite/ld-mips-elf/export-class-ref-f2.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
The options warning_output and error_output to the run_dump_test
function were incorrectly checking the return value from the regexp_diff
function, and so, as a result failing tests were showing as a pass.
Fixed in this commit.
ld/ChangeLog:
* testsuite/lib/ld-lib.exp (run_dump_test): Fix check of return
value from regexp_diff.
* testsuite/ld-elf/orphan-5.l: Fix expected output.
* testsuite/ld-elf/orphan-6.l: Likewise.
PR 18452
* ldlang.c (maybe_overlays): New static var.
(lang_size_sections_1): Set it here.
(struct check_sec): New.
(sort_sections_by_lma): Adjust for array of structs.
(sort_sections_by_vma): New function.
(lang_check_section_addresses): Check both LMA and VMA for overlap.
* testsuite/ld-scripts/rgn-over7.d: Adjust.
PR ld/19803
* ldlang.c (lang_add_gc_name): New function. Adds the provided
symbol name to the list of gc symbols.
(lang_process): Call lang_add_gc_name with entry_symbol_default if
entry_symbol.name is NULL. Use lang_add_gc_name to add the init
and fini function names.
* pe-dll.c (process_def_file_and_drectve): Add exported names to
the gc symbol list.
* testsuite/ld-pe/pr19803.s: Do not export _testval symbol.
* testsuite/ld-pe/pr19803.d: Tweak expected output.
Symbols defined in PIE should be bound locally, the same as -shared
-Bsymbolic.
bfd/
PR ld/19827
* elf32-i386.c (elf_i386_check_relocs): Bind defined symbol
locally in PIE.
(elf_i386_relocate_section): Likewise.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
(elf_x86_64_relocate_section): Likewise.
ld/
PR ld/19827
* testsuite/ld-i386/i386.exp: Run PR ld/19827 tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr19827.rd: New file.
* testsuite/ld-i386/pr19827a.S: Likewise.
* testsuite/ld-i386/pr19827b.S: Likewise.
* testsuite/ld-x86-64/pr19827.rd: Likewise.
* testsuite/ld-x86-64/pr19827a.S: Likewise.
* testsuite/ld-x86-64/pr19827b.S: Likewise.
Since dynamic sections aren't applicable to relocatable file, don't
create dynamic sections for -E/--dynamic-list when relocatable.
bfd/
PR ld/19789
* elflink.c (elf_link_add_object_symbols): Create dynamic sections
for -E/--dynamic-list only when not relocatable.
ld/
PR ld/19789
* testsuite/ld-elf/pr19789.d: New file.
* testsuite/ld-elf/pr19789.s: Likewise.
Increment PLT reference count for locally defined local IFUNC symbols
in shared object since STT_GNU_IFUNC symbol must go through PLT even
if it is locally defined and undefined symbol may turn out to be a
STT_GNU_IFUNC symbol later.
bfd/
PR ld/19784
* elf32-i386.c (elf_i386_check_relocs): Increment PLT reference
count for locally defined local IFUNC symbols in shared object.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
ld/
PR ld/19784
* testsuite/ld-i386/i386.exp: Remove pr19636-2e-nacl test.
* testsuite/ld-i386/pr19636-2e-nacl.d: Moved to ...
* testsuite/ld-i386/pr19636-2e.d: Here. Remove notarget.
* testsuite/ld-ifunc/ifunc.exp: Run PR ld/19784 tests.
* testsuite/ld-ifunc/pass.out: New file.
* testsuite/ld-ifunc/pr19784a.c: Likewise.
* testsuite/ld-ifunc/pr19784b.c: Likewise.
* testsuite/ld-ifunc/pr19784c.c: Likewise.
Since compiler may pass --as-needed to ld by default, link .o file
before .so file in ifunc tests.
PR ld/19774
* testsuite/ld-ifunc/ifunc.exp: Link tmpdir/pr18808a.o before
tmpdir/libpr18808.so. Link tmpdir/pr18841a.o before
tmpdir/libpr18841b.so and tmpdir/libpr18841c.so. Test
--as-needed for pr18841c.
Since compiler may pass --as-needed to ld by default, link .o file
before .so file in i386/x86-64 tests.
PR ld/19774
* testsuite/ld-i386/i386.exp: Link tmpdir/pr18900.o before
tmpdir/pr18900.so and test --as-needed. Link tmpdir/gotpc1.o
before tmpdir/got1d.so and test --as-needed.
* testsuite/ld-x86-64/x86-64.exp: Link tmpdir/pr18900.o before
tmpdir/pr18900.so and test --as-needed.
2016-03-07 Jiong Wang <jiong.wang@arm.com>
bfd/
* elfnn-aarch64.c (elfNN_aarch64_check_relocs): Always create .got section
if the symbol "_GLOBAL_OFFSET_TABLE_" referenced.
ld/
* testsuite/ld-aarch64/implicit_got_section_1.s: New test source file.
* testsuite/ld-aarch64/implicit_got_section_1.d: New test expected result.
* testsuite/ld-aarch64/aarch64-elf.exp: Run new test.
Since compiler may pass --as-needed to ld by default, link
tmpdir/copyreloc-main.o before tmpdir/copyreloc-lib.so.
* testsuite/ld-i386/i386.exp: Link tmpdir/copyreloc-main.o
before tmpdir/copyreloc-lib.so and test --as-needed.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
Common symbol in executable is a definition, which overrides definition
from shared objects. When linker sees a new definition from a shared
object, the new dynamic definition should be overridden by the previous
common symbol in executable.
bfd/
PR ld/19579
* elflink.c (_bfd_elf_merge_symbol): Treat common symbol in
executable as definition if the new definition comes from a
shared library.
ld/
PR ld/19579
* testsuite/ld-elf/pr19579a.c: New file.
* testsuite/ld-elf/pr19579b.c: Likewise.
* testsuite/ld-elf/shared.exp: Run PR ld/19579 test.
ld-elf/pr19162.d fails for hppa-*-* since Dave Anglin's fix for PR 12376
makes the data segment always start on a page boundary.
* testsuite/ld-elf/pr19162.d: Skip hppa-*-*.
PR ld/12365 test is to verify that linker catches the reference to
undefined symbol error caused by a GCC bug. Since the GCC bug has
been fixed in GCC 6, update the test to verify that there is no
reference to undefined symbol in executable
* testsuite/ld-plugin/lto.exp: Update PR ld/12365 test for GCC 6.
For these three relocations, 17 bit signed value should be used, instead of
16 bit. The bitsize field is changed from 16 to 17, this field in aarch64
backend is used for overflow check only.
bfd/
2016-02-26 Renlin Li <renlin.li@arm.com>
* elfnn-aarch64.c (elfNN_aarch64_howto_table): Fix signed overflow
check for MOVW_SABS_G0, MOVW_SABS_G1, MOVW_SABS_G2.
ld/
2016-02-26 Renlin Li <renlin.li@arm.com>
* testsuite/ld-aarch64/aarch64-elf.exp: Run new testcases.
* testsuite/ld-aarch64/emit-relocs-270.d: Update to use new boundary.
* testsuite/ld-aarch64/emit-relocs-271.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-272.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-270-overflow.d: New.
* testsuite/ld-aarch64/emit-relocs-270-overflow.s: New.
* testsuite/ld-aarch64/emit-relocs-271-overflow.d: New.
* testsuite/ld-aarch64/emit-relocs-271-overflow.s: New.
* testsuite/ld-aarch64/emit-relocs-272-overflow.d: New.
* testsuite/ld-aarch64/emit-relocs-272-overflow.s: New.
R_386_GOT32X, R_X86_64_GOTPCRELX and R_X86_64_REX_GOTPCRELX relocations
retrieve the symbol address via its GOT slot. If the symbol address is
known at the link-time, we can use it directly by changing instruction
encoding. Indirect branch can only be converted to PC relative direct
branch. MOV can be changed to LEA or encoded differently with signed
address. The subset of binary operations can be encoded only with
signed address.
If undefined weak symbol is resolved to zero link-time, we can use it
as address. Zero addresss can't used with PC relative direct branch
when PIC is true since the current PC is unknown. In 64-bit, 32-bit
relocation for PC relatiave direct branch to zero may also overflow.
If this optimization causes relocation overflow, --no-relax can be used
to work around it.
bfd/
PR ld/19609
* elf32-i386.c (elf_i386_convert_load): Convert to R_386_32 for
load with locally bound symbols if PIC is false or there is no
base register. Optimize branch to 0 if PIC is false.
(elf_i386_relocate_section): Don't generate dynamic relocations
against undefined weak symbols if PIC is false.
* elf64-x86-64.c (elf_x86_64_convert_load): Disable optimization
if we can't estimate relocation overflow with --no-relax.
Convert to R_X86_64_32S/R_X86_64_32 for load with locally bound
symbols if PIC is false. Optimize branch to 0 if PIC is false.
(elf_x86_64_relocate_section): Don't generate dynamic relocations
against undefined weak symbols if PIC is false.
ld/
PR ld/19609
* testsuite/ld-i386/got1.dd: Updated.
* testsuite/ld-i386/lea1c.d: Likewise.
* testsuite/ld-i386/load1-nacl.d: Likewise.
* testsuite/ld-i386/load1.d: Likewise.
* testsuite/ld-i386/load4b.d: Likewise.
* testsuite/ld-i386/load5b.d: Likewise.
* testsuite/ld-i386/mov1b.d: Likewise.
* testsuite/ld-x86-64/mov1b.d: Likewise.
* testsuite/ld-x86-64/mov1d.d: Likewise.
* testsuite/ld-ifunc/ifunc-21-i386.d: Likewise.
* testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise.
* testsuite/ld-ifunc/ifunc-22-i386.d: Likewise.
* testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise.
* testsuite/ld-x86-64/gotpcrel1.dd: Likewise.
* testsuite/ld-x86-64/lea1a.d: Likewise.
* testsuite/ld-x86-64/lea1b.d: Likewise.
* testsuite/ld-x86-64/lea1c.d: Likewise.
* testsuite/ld-x86-64/lea1d.d: Likewise.
* testsuite/ld-x86-64/lea1e.d: Likewise.
* testsuite/ld-x86-64/lea1f.d: Likewise.
* testsuite/ld-x86-64/mov1b.d: Likewise.
* testsuite/ld-x86-64/mov1d.d: Likewise.
* testsuite/ld-x86-64/pr13082-3b.d: Likewise.
* testsuite/ld-x86-64/pr13082-4b.d: Likewise.
* testsuite/ld-x86-64/lea1.s: Add tests for 32-bit registers.
* testsuite/ld-i386/pr19609-1.s: New file.
* testsuite/ld-i386/pr19609-1a.d: Likewise.
* testsuite/ld-i386/pr19609-1b.d: Likewise.
* testsuite/ld-i386/pr19609-1c.d: Likewise.
* testsuite/ld-i386/pr19609-1d.d: Likewise.
* testsuite/ld-i386/pr19609-1e.d: Likewise.
* testsuite/ld-i386/pr19609-1f.d: Likewise.
* testsuite/ld-i386/pr19609-1g.d: Likewise.
* testsuite/ld-i386/pr19609-1h.d: Likewise.
* testsuite/ld-i386/pr19609-1i.d: Likewise.
* testsuite/ld-i386/pr19609-2.s: Likewise.
* testsuite/ld-i386/pr19609-2a.d: Likewise.
* testsuite/ld-i386/pr19609-2b.d: Likewise.
* testsuite/ld-i386/pr19609-2c.d: Likewise.
* testsuite/ld-i386/undefweak.s: Likewise.
* testsuite/ld-i386/undefweaka.d: Likewise.
* testsuite/ld-i386/undefweakb.d: Likewise.
* testsuite/ld-x86-64/pr13082-3c.d: Likewise.
* testsuite/ld-x86-64/pr13082-3d.d: Likewise.
* testsuite/ld-x86-64/pr19609-1.s: Likewise.
* testsuite/ld-x86-64/pr19609-1a.d: Likewise.
* testsuite/ld-x86-64/pr19609-1b.d: Likewise.
* testsuite/ld-x86-64/pr19609-1c.d: Likewise.
* testsuite/ld-x86-64/pr19609-1d.d: Likewise.
* testsuite/ld-x86-64/pr19609-1e.d: Likewise.
* testsuite/ld-x86-64/pr19609-1f.d: Likewise.
* testsuite/ld-x86-64/pr19609-1g.d: Likewise.
* testsuite/ld-x86-64/pr19609-1h.d: Likewise.
* testsuite/ld-x86-64/pr19609-1i.d: Likewise.
* testsuite/ld-x86-64/pr19609-1j.d: Likewise.
* testsuite/ld-x86-64/pr19609-1k.d: Likewise.
* testsuite/ld-x86-64/pr19609-1l.d: Likewise.
* testsuite/ld-x86-64/pr19609-1m.d: Likewise.
* testsuite/ld-x86-64/pr19609-2.s: Likewise.
* testsuite/ld-x86-64/pr19609-2a.d: Likewise.
* testsuite/ld-x86-64/pr19609-2b.d: Likewise.
* testsuite/ld-x86-64/pr19609-2c.d: Likewise.
* testsuite/ld-x86-64/pr19609-2d.d: Likewise.
* testsuite/ld-x86-64/pr19609-3.s: Likewise.
* testsuite/ld-x86-64/pr19609-3a.d: Likewise.
* testsuite/ld-x86-64/pr19609-3b.d: Likewise.
* testsuite/ld-x86-64/pr19609-4.s: Likewise.
* testsuite/ld-x86-64/pr19609-4a.d: Likewise.
* testsuite/ld-x86-64/pr19609-4b.d: Likewise.
* testsuite/ld-x86-64/pr19609-4c.d: Likewise.
* testsuite/ld-x86-64/pr19609-4d.d: Likewise.
* testsuite/ld-x86-64/pr19609-4e.d: Likewise.
* testsuite/ld-x86-64/pr19609-5.s: Likewise.
* testsuite/ld-x86-64/pr19609-5a.d: Likewise.
* testsuite/ld-x86-64/pr19609-5b.d: Likewise.
* testsuite/ld-x86-64/pr19609-5c.d: Likewise.
* testsuite/ld-x86-64/pr19609-5d.d: Likewise.
* testsuite/ld-x86-64/pr19609-5e.d: Likewise.
* testsuite/ld-x86-64/pr19609-6.s: Likewise.
* testsuite/ld-x86-64/pr19609-6a.d: Likewise.
* testsuite/ld-x86-64/pr19609-6b.d: Likewise.
* testsuite/ld-x86-64/pr19609-6c.d: Likewise.
* testsuite/ld-x86-64/pr19609-6d.d: Likewise.
* testsuite/ld-x86-64/pr19609-7.s: Likewise.
* testsuite/ld-x86-64/pr19609-7a.d: Likewise.
* testsuite/ld-x86-64/pr19609-7b.d: Likewise.
* testsuite/ld-x86-64/pr19609-7c.d: Likewise.
* testsuite/ld-x86-64/pr19609-7d.d: Likewise.
* testsuite/ld-i386/i386.exp: Run undefweak tests and tests for
PR ld/19609.
* testsuite/ld-x86-64/x86-64.exp: Run pr13082-3c, pr13082-3d
and tests for PR ld/19609.
We need to update symbol version for symbols from linker script.
bfd/
PR ld/19698
* elflink.c (bfd_elf_record_link_assignment): Set versioned if
symbol version is unknown.
ld/
PR ld/19698
* testsuite/ld-elf/pr19698.d: New file.
* testsuite/ld-elf/pr19698.s: Likewise.
* testsuite/ld-elf/pr19698.t: Likewise.
Linker assigned symbols should be made dynamic by default only when
creating shared object or relocatable executable.
bfd/
* elflink.c (bfd_elf_record_link_assignment): Check for shared
library, instead of PIC, and don't check PDE when making linker
assigned symbol dynamic.
ld/
* testsuite/ld-frv/fdpic-pie-6.d: Updated.
* testsuite/ld-mips-elf/pie-n32.d: Likewise.
* testsuite/ld-mips-elf/pie-n64.d: Likewise.
* testsuite/ld-mips-elf/pie-o32.d: Likewise.
Since PR ld/19617 tests require share library support, enable them
only for Linux/GNU/Solaris targets.
* testsuite/ld-elf/pr19617a.d: Enable only for *-*-linux*,
*-*-gnu* and *-*-solaris*.
* testsuite/ld-elf/pr19617b.d: Likewise.
* testsuite/ld-elf/pr19617c.d: Likewise.
In embedded environments, including boot loaders, the non-PIC executable
needs to export its symbols to modules loaded in the future. We should
always create dynamic sections for -E/--dynamic-list.
bfd/
PR ld/19617
* elflink.c (elf_link_add_object_symbols): Always create dynamic
sections for -E/--dynamic-list.
ld/
PR ld/19617
* testsuite/ld-elf/pr19617.s: New file.
* testsuite/ld-elf/pr19617a.d: Likewise.
* testsuite/ld-elf/pr19617b.d: Likewise.
* testsuite/ld-elf/pr19617c.d: Likewise.
gas * doc/as.texinfo (.section): Document that numeric values can now
be used for the flags and type fields of the ELF target's .section
directive. Add notes about the restrictions on setting flags and
types.
* config/obj-elf.c (obj_elf_change_section): Allow known sections
to be given processor specific section types. Allow processor and
application specific flags of a section to be set after
definition.
(obj_elf_parse_section_letters): Handle parsing numeric values.
(obj_elf_section_type): Handle parsing numeric values.
(obj_elf_section): Allow numeric type values.
* config/obj-elf.h (obj_elf_change_section): Update prototype.
* testsuite/gas/elf/section10.d: New test.
* testsuite/gas/elf/section10.s: Source file for new test.
* testsuite/gas/elf/elf.exp: Run the new test.
* testsuite/gas/i386/ilp32/x86-64-unwind.d: Remove dependency upon
the description of the flags produced by readelf.
* testsuite/gas/tic6x/scomm-directive-4.d: Likewise.
* NEWS: Mention the new feature.
bfd * elf-bfd.h (struct bfd_elf_special_section): Use unsigned values
for length and type fields. Use a signed value for the
suffix_length field.
binutils* readelf.c (get_section_type_name): Add hex prefix to offsets
printed for LOPROC and LOOS values. Ensure that a result is
always returned for the V850 target, even when an unrecognised
processor specific value is encountered.
(process_section_headers): Display key values in the order in
which they appear to the user. Add the "C (compressed)" value to
the list.
ld * testsuite/ld-i386/pr12718.d: Remove dependency upon the
description of the flags produced by readelf.
* testsuite/ld-i386/pr12921.d: Likewise.
* testsuite/ld-i386/tlsbin-nacl.rd: Likewise.
* testsuite/ld-i386/tlsbin.rd: Likewise.
* testsuite/ld-i386/tlsbindesc-nacl.rd: Likewise.
* testsuite/ld-i386/tlsbindesc.rd: Likewise.
* testsuite/ld-i386/tlsdesc-nacl.rd: Likewise.
* testsuite/ld-i386/tlsdesc.rd: Likewise.
* testsuite/ld-i386/tlsgdesc-nacl.rd: Likewise.
* testsuite/ld-i386/tlsgdesc.rd: Likewise.
* testsuite/ld-i386/tlsnopic-nacl.rd: Likewise.
* testsuite/ld-i386/tlsnopic.rd: Likewise.
* testsuite/ld-i386/tlspic-nacl.rd: Likewise.
* testsuite/ld-i386/tlspic.rd: Likewise.
* testsuite/ld-s390/tlsbin.rd: Likewise.
* testsuite/ld-s390/tlsbin_64.rd: Likewise.
* testsuite/ld-s390/tlspic.rd: Likewise.
* testsuite/ld-s390/tlspic_64.rd: Likewise.
* testsuite/ld-sh/tlsbin-2.d: Likewise.
* testsuite/ld-sh/tlspic-2.d: Likewise.
* testsuite/ld-tic6x/common.d: Likewise.
* testsuite/ld-tic6x/shlib-1.rd: Likewise.
* testsuite/ld-tic6x/shlib-1b.rd: Likewise.
* testsuite/ld-tic6x/shlib-1r.rd: Likewise.
* testsuite/ld-tic6x/shlib-1rb.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1b.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1r.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1rb.rd: Likewise.
* testsuite/ld-tic6x/shlib-noindex.rd: Likewise.
* testsuite/ld-tic6x/static-app-1.rd: Likewise.
* testsuite/ld-tic6x/static-app-1b.rd: Likewise.
* testsuite/ld-tic6x/static-app-1r.rd: Likewise.
* testsuite/ld-tic6x/static-app-1rb.rd: Likewise.
* testsuite/ld-x86-64/ilp32-4-nacl.d: Likewise.
* testsuite/ld-x86-64/ilp32-4.d: Likewise.
* testsuite/ld-x86-64/pr12718.d: Likewise.
* testsuite/ld-x86-64/pr12921.d: Likewise.
* testsuite/ld-x86-64/split-by-file-nacl.rd: Likewise.
* testsuite/ld-x86-64/split-by-file.rd: Likewise.
* testsuite/ld-x86-64/tlsbin-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsbin.rd: Likewise.
* testsuite/ld-x86-64/tlsbindesc-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsbindesc.rd: Likewise.
* testsuite/ld-x86-64/tlsdesc-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsdesc.rd: Likewise.
* testsuite/ld-x86-64/tlsgdesc-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsgdesc.rd: Likewise.
* testsuite/ld-x86-64/tlspic-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlspic.rd: Likewise.
* testsuite/ld-xtensa/tlsbin.rd: Likewise.
* testsuite/ld-xtensa/tlspic.rd: Likewise.
Before binutils 2.26, -Bsymbolic and -Bsymbolic-functions were also
applied to PIE so that "ld -pie -Bsymbolic -E" can be used to export
symbols in PIE with local binding. This patch re-enables -Bsymbolic
and -Bsymbolic-functions for PIE.
PR ld/19615
* ld.texinfo: Document -Bsymbolic and -Bsymbolic-functions for
PIE.
* lexsup.c (parse_args): Enable -Bsymbolic and
-Bsymbolic-functions for PIE.
* testsuite/ld-i386/i386.exp: Run pr19175.
* testsuite/ld-i386/pr19615.d: New file.
* testsuite/ld-i386/pr19615.s: Likewise.
* testsuite/ld-x86-64/pr19615.d: Likewise.
* testsuite/ld-x86-64/pr19615.s: Likewise.
bfd * elfnn-aarch64.c (elfNN_aarch64_relocate_section): Add a more
helpful warning message to explain why certain AArch64 relocs
might overflow.
ld * testsuite/ld-aarch64/reloc-overflow-bad.d: New test.
* testsuite/ld-aarch64/reloc-overflow-1.s: New source file.
* testsuite/ld-aarch64/reloc-overflow-2.s: New source file.
* testsuite/ld-aarch64/aarch64-elf.exp: Run the new test.
bfd * elfnn-aarch64.c (elfNN_aarch64_relocate_section): Add a more
helpful warning message to explain why certain AArch64 relocs
might overflow.
ld * testsuite/ld-aarch64/reloc-overflow-bad.d: New test.
* testsuite/ld-aarch64/reloc-overflow-1.s: New source file.
* testsuite/ld-aarch64/reloc-overflow-2.s: New source file.
* testsuite/ld-aarch64/aarch64-elf.exp: Run the new test.
Don't add DT_NEEDED if a symbol from a library loaded via DT_NEEDED
doesn't match the symbol referenced by regular object.
bfd/
PR ld/19553
* elflink.c (elf_link_add_object_symbols): Don't add DT_NEEDED
if a symbol from a library loaded via DT_NEEDED doesn't match
the symbol referenced by regular object.
ld/testsuite/
PR ld/19553
* testsuite/ld-elf/indirect.exp: Run tests for PR ld/19553.
* testsuite/ld-elf/pr19553.map: New file.
* testsuite/ld-elf/pr19553.map: Likewise.
* testsuite/ld-elf/pr19553a.c: Likewise.
* testsuite/ld-elf/pr19553b.c: Likewise.
* testsuite/ld-elf/pr19553b.out: Likewise.
* testsuite/ld-elf/pr19553c.c: Likewise.
* testsuite/ld-elf/pr19553c.out: Likewise.
* testsuite/ld-elf/pr19553d.c: Likewise.
* testsuite/ld-elf/pr19553d.out: Likewise.
There is no need to check relocation IFUNC symbol if there are no
dynamic symbols.
bfd/
PR ld/19539
* elf32-i386.c (elf_i386_reloc_type_class): Check relocation
against STT_GNU_IFUNC symbol only with dynamic symbols.
* elf64-x86-64.c (elf_x86_64_reloc_type_class): Likewise.
ld/
PR ld/19539
* testsuite/ld-elf/pr19539.d: New file.
* testsuite/ld-elf/pr19539.s: Likewise.
* testsuite/ld-elf/pr19539.t: Likewise.
PR ld/19455
* elf32-arm.c (elf32_arm_create_dynamic_sections): Set the ELF
class of the linker stub bfd.
(elf32_arm_check_relocs): Skip check for pic format after
processing a vxWorks R_ARM_ABS12 reloc.
* elflink.c (bfd_elf_final_link): Check for ELFCLASSNONE when
reporting a class mismatch.
* testsuite/ld-arm/vxworks1-lib.dd: Update for current
disassmebler output.
* testsuite/ld-arm/vxworks1-lib.rd: Likewise.
* testsuite/ld-arm/vxworks1.dd: Likewise.
* testsuite/ld-arm/vxworks1.rd: Likewise.
* testsuite/ld-arm/vxworks1.ld: Set the output format.
As defined at AArch64 ELF Specification (4.6.7 Call and Jump
relocations), symbol with type of non STT_FUNC but in different input
section with relocation place should insert long branch veneer also.
Meanwhile the current long branch veneer infrastructure havn't considered
the situation where the branch destination is "sym_value + rela->addend".
This was OK because we only insert veneer for long call destination is
STT_FUNC symbol for which the addend is always zero. But as we relax the
support to other situations by this patch, we need to handle addend be
non-zero value. For example, for static function, relocation against
"local symbol" are turned into relocation against "section symbol + offset"
where there is a valid addend.
bfd/
* elfnn-aarch64.c (aarch64_type_of_stub): Allow insert long branch
veneer for sym_sec != input_sec.
(elfNN_aarch64_size_stub): Support STT_SECTION symbol.
(elfNN_aarch64_final_link_relocate): Take rela addend into account when
calculation destination.
ld/
* testsuite/ld-aarch64/farcall-section.d: Delete.
* testsuite/ld-aarch64/farcall-section.s: Delete.
* testsuite/ld-aarch64/farcall-b-section.d: New expectation file.
* testsuite/ld-aarch64/farcall-bl-section.d: Likewise.
* testsuite/ld-aarch64/farcall-b-section.s: New testcase.
* testsuite/ld-aarch64/farcall-bl-section.s: Likewise.
* testsuite/ld-aarch64/aarch64-elf.exp: Likewise.
PR 19457
* testsuite/ld-scripts/script.exp (extract_symbol_test): Stop test
early for PE based targets.
* testsuite/ld-scripts/align.t: Use 0x1000 as VMA alignment.
* testsuite/ld-pe/tlssec32.d: Allow for relocatable output.
bfd/ChangeLog:
* elf32-arm.c ((elf32_arm_special_sections): Remove catch of noread
section using '.text.noread' pattern.
gas/ChangeLog:
* config/obj-elf.c (obj_elf_change_section) : Allow arm section with
SHF_ARM_NOREAD section flag.
* config/tc-arm.h (md_elf_section_letter) : Implement this hook to
handle letter 'y'.
(arm_elf_section_letter) : Declare it.
* config/tc-arm.c (arm_elf_section_letter): Handle letter 'y' to set
SHF_ARM_NOREAD section flag.
* doc/c-arm.texi (ARM section attribute 'y'): Document it.
gas/testsuite/ChangeLog:
* gas/arm/section-execute-only.s: New test case.
* gas/arm/section-execute-only.d: Expected output.
ld/testsuite/ChangeLog:
* ld-arm/thumb1-noread-not-present-mixing-two-section.s: Add 'y'
attribute usage.
* ld-arm/thumb1-noread-present-one-section.s: Likewise.
* ld-arm/thumb1-noread-present-two-section.s: Likewise.
* ld-arm/thumb1-input-section-flag-match.s: Likewise.
binutils/ChangeLog:
* readelf.c (get_elf_section_flags): Display y letter for section
with SHF_ARM_NOREAD section flag in readelf section output.
(process_section_headers): Add y letter in readelf section output
key mapping for ARM architecture.
* testsuite/ld-scripts/rgn-at11.s: New file - based on rgn-at10.s
but with 16 byte section alignment.
* testsuite/ld-scripts/rgn-at11.d: Use new source file. Reenable
test for MIPS targets.
Oddly, config.sub converts a duple ending in -elf for these target to
-unknown-none, which means they aren't seen as elf targets by
binutils. So, counter that. This exposes a number of testsuite
issues (ones you would have seen if configuring with a full triple,
say m68hc11-unknown-elf).
binutils/
* testsuite/lib/binutils-common.exp (is_elf_format): Return true
for m68hc11/12 and xgate triples.
gas/
* testsuite/gas/cfi/cfi.exp: Exclude m68hc11/12 from m68k test.
ld/
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Exclude xgate.
* testsuite/ld-elf/endsym.d: xfail m68hc11/12 and xgate.
* testsuite/ld-elf/pr14156a.d: Likewise.
* testsuite/ld-elf/pr14926.d: Don't run for m68hc11/12 and xgate.
* testsuite/ld-elf/sec64k.exp: Likewise.
2016-01-14 Thomas Preud'homme <thomas.preudhomme@arm.com>
ld/
* testsuite/ld-arm/arm-elf.exp (Thumb-Thumb farcall v6-M (no profile)):
Set address of .foo section when linking.
* testsuite/ld-arm/farcall-thumb-thumb-m-no-profile-b.s: Place myfunc
in .foo section.
* testsuite/ld-arm/farcall-thumb-thumb-m-no-profile.d: Adapt expected
output to the above changes.
bfd * elf32-arm.c (elf32_arm_fix_exidx_coverage): Insert cantunwind when
address in first unwind entry does not match start of section.
tests * ld-arm/arm-elf.exp: New test.
* ld-arm/unwind-mix.d: New file.
* ld-arm/unwind-mix1.s: New file.
* ld-arm/unwind-mix2.s: New file.
We have a problem in that in making compatibility checks while merging
private BFD data on the MIPS target we give priority to the attribute
check, which may fail and cause the function to abort early on. The
problem with this is the ABI compatibility aspect recorded in the
attributes is relatively minor compared to aspects recorded in the ELF
file header. However the premature exit causes any more important
compatibility aspect violated to be masked and not reported to the user
once a problem with attributes has been noticed.
So move the attribute check after the ELF file header flag check in
`_bfd_mips_elf_merge_private_bfd_data', and do not return prematurely
there. Take advantage of the resulting grouping of ELF file header
handling together and remove the premature success return point for the
first input object being handled, letting the code later on figure out
output ABI flags even for this object.
Update LD test cases according to messages from ELF file header checks
now preceding ones from attribute checks.
bfd/
* elfxx-mips.c (_bfd_mips_elf_merge_private_bfd_data): Move
attribute check after ELF file header flag check.
ld/
* testsuite/ld-mips-elf/attr-gnu-4-14.d: Update the order of
messages expected according to MIPS BFD private data merge
changes.
* testsuite/ld-mips-elf/attr-gnu-4-24.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-34.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-41.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-42.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-43.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-45.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-46.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-47.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-48.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-49.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-54.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-64.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-74.d: Likewise.
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
ld/testsuite/
* ld-arm/arm-elf.exp: Run new test "Thumb-Thumb farcall v6-M (no
profile)".
* ld-arm/farcall-thumb-thumb-m-no-profile-a.s: New file.
* ld-arm/farcall-thumb-thumb-m-no-profile-b.s: Likewise.
* ld-arm/farcall-thumb-thumb-m-no-profile.d: Likewise.
bfd * elf-bfd.h: Add callback to count additional relocations.
* elf32-arm.c (_arm_elf_section_data): Add new counter.
(insert_cantunwind_after): Increment relocations counter.
(elf32_arm_fix_exidx_coverage): Remove exidx entries and add
terminating CANTUNWIND entry only in final builds.
(elf32_arm_add_relocation): New function.
(elf32_arm_write_section): Add relocations in relocatable builds.
(elf32_arm_count_additional_relocs): New function.
(elf_backend_count_additional_relocs): New define.
* bfd/elflink.c (bfd_elf_final_link): Use callback and adjust size of
.rel section.
* bfd/elfxx-target.h (elf_backend_count_additional_relocs): New define.
ld * emultempl/armelf.em (gld${EMULATION_NAME}_after_allocation): Call
elf32_arm_fix_exidx_coverage for relocatable builds.
ld/testsuite
* ld-arm/arm-elf.exp: New test.
* ld-arm/unwind-rel.d: New file.
* ld-arm/unwind-rel1.s: New file.
* ld-arm/unwind-rel2.s: New file.
* ld-arm/unwind-rel3.s: New file.
include/elf
* arm.h: Add arm SHF_ARM_NOREAD section flag.
bfd * bfd-in2.h: Regenerate.
* section.c: Add SEC_ELF_NOREAD.
* elf32-arm.c (elf32_arm_post_process_headers): Only set
PF_X attribute if a segment only contains section with
SHF_ARM_NOREAD flag.
(elf32_arm_fake_sections): Add SEC_ELF_NOREAD conversion.
(elf32_arm_section_flags): New function to convert SHF_ARM_NOREAD
to bfd flag.
(elf32_arm_lookup_section_flags): New function to allow
INPUT_SECTION_FLAGS directive with SHF_ARM_NOREAD flag.
(elf32_arm_special_sections): Add special sections array
to catch section prefix by '.text.noread' pattern.
ld/testsuite
* ld-arm/arm-elf.exp: New tests.
* ld-arm/thumb1-input-section-flag-match.d: New
* ld-arm/thumb1-input-section-flag-match.s: New
* ld-arm/thumb1-noread-not-present-mixing-two-section.d: New
* ld-arm/thumb1-noread-not-present-mixing-two-section.s: New
* ld-arm/thumb1-noread-present-one-section.d: New
* ld-arm/thumb1-noread-present-one-section.s: New
* ld-arm/thumb1-noread-present-two-section.d: New
* ld-arm/thumb1-noread-present-two-section.s: New
binutils
* readelf.c (get_elf_section_flags): Add support for ARM specific
section flags.
2015-12-16 Mickael Guene <mickael.guene@st.com>
bfd/
* bfd-in2.h: Regenerate.
* reloc.c: Add new relocations.
* libbfd.h (bfd_reloc_code_real_names): Add new relocations
display names.
* elf32-arm.c (elf32_arm_howto_table_1): Add HOWTO for new
relocations.
(elf32_arm_reloc_map): Add bfd/arm mapping for new relocations.
(elf32_arm_final_link_relocate): Implement new relocations
resolution.
gas/
* doc/c-arm.texi: Add documentation about new directives
* config/tc-arm.c (group_reloc_table): Add mapping between gas
syntax and new relocations.
(do_t_add_sub): Keep new relocations for add operand.
(do_t_mov_cmp): Keep new relocations for mov operand.
(insns): Use 'shifter operand with possible group relocation'
operand parse code for movs operand.
(md_apply_fix): Implement mov and add encoding when new
relocations on them.
(tc_gen_reloc): Add new relocations.
(arm_fix_adjustable): Since offset has a limited range ([0:255])
we disable adjust_reloc_syms() for new relocations.
gas/testsuite/
* gas/arm/adds-thumb1-reloc-local.d: New
* gas/arm/adds-thumb1-reloc-local.s: New
* gas/arm/movs-thumb1-reloc-local.d: New
* gas/arm/movs-thumb1-reloc-local.s: New
include/
* elf/arm.h: Add new arm relocations.
ld/testsuite/
* ld-arm/arm-elf.exp (armelftests_common): Add new relocations
tests.
* ld-arm/thumb1-adds.d: New
* ld-arm/thumb1-adds.s: New
* ld-arm/thumb1-movs.d: New
* ld-arm/thumb1-movs.s: New
To support thumb1 execute-only code we need to support four new
relocations (R_ARM_THM_ALU_ABS_G0_NC, R_ARM_THM_ALU_ABS_G1_NC,
R_ARM_THM_ALU_ABS_G2_NC and R_ARM_THM_ALU_ABS_G3_NC).
These relocations allow the static linker to finalize construction
of symbol address.
Typical sequence of code to get address of the symbol foo is then
the following :
movs r3, #:upper8_15:#foo
lsls r3, #8
adds r3, #:upper0_7:#foo
lsls r3, #8
adds r3, #:lower8_15:#foo
lsls r3, #8
adds r3, #:lower0_7:#foo
This will give following sequence of text and relocations after
assembly :
4: 2300 movs r3, #0
4: R_ARM_THM_ALU_ABS_G3_NC foo
6: 021b lsls r3, r3, #8
8: 3300 adds r3, #0
8: R_ARM_THM_ALU_ABS_G2_NC foo
a: 021b lsls r3, r3, #8
c: 3300 adds r3, #0
c: R_ARM_THM_ALU_ABS_G1_NC foo
e: 021b lsls r3, r3, #8
10: 3300 adds r3, #0
10: R_ARM_THM_ALU_ABS_G0_NC foo
Linker can't optimize R_386_GOT32 and R_386_GOT32X relocations if addend
isn't 0. It isn't valid to convert
movl foo@GOT+1(%ecx), %eax
to
leal foo@GOTOFF+1(%ecx), %eax
nor to convert
movq foo@GOTPCREL+1(%rip), %rax
to
leaq foo(%rip), %rax
for x86-64. We should check if addend is 0 before optimizing R_386_GOT32
and R_386_GOT32X relocations. Testcases are added for i386 and x86-64.
bfd/
* elf32-i386.c (elf_i386_convert_load): Skip if addend isn't 0.
(elf_i386_relocate_section): Skip R_386_GOT32X optimization if
addend isn't 0.
ld/testsuite/
* ld-i386/i386.exp: Run mov2a, mov2b and mov3.
* ld-i386/mov2.s: New file.
* ld-i386/mov2a.d: Likewise.
* ld-i386/mov2b.d: Likewise.
* ld-i386/mov3.d: Likewise.
* ld-i386/mov3.s: Likewise.
* ld-x86-64/mov2.s: Likewise.
* ld-x86-64/mov2a.d: Likewise.
* ld-x86-64/mov2b.d: Likewise.
* ld-x86-64/mov2c.d: Likewise.
* ld-x86-64/mov2d.d: Likewise.
* ld-x86-64/x86-64.exp: Run mov2a, mov2b, mov2c and mov2d.
Symbol defined by a linker assignment may have type bfd_link_hash_new
or bfd_link_hash_undefined. And h->def_regular is always set.
elf_i386_convert_load and elf_x86_64_convert_load should check
h->def_regular as well as bfd_link_hash_undefined and bfd_link_hash_new
to see if a symbol is defined by a linker script.
bfd/
PR ld/19319
* elf32-i386.c (elf_i386_convert_load): Check h->def_regular
instead of bfd_link_hash_new.
* elf64-x86-64.c (elf_x86_64_convert_load): Likewise. Skip
relocation overflow for bfd_link_hash_undefined and
bfd_link_hash_new if h->def_regular is set.
ld/testsuite/
PR ld/19319
* ld-i386/i386.exp: Run pr19319 test.
* ld-x86-64/x86-64.exp: Likewise.
* ld-i386/pr19319.dd: New file.
* ld-i386/pr19319a.S: Likewise.
* ld-i386/pr19319b.S: Likewise.
* ld-x86-64/pr19319.dd: Likewise.
* ld-x86-64/pr19319a.S: Likewise.
* ld-x86-64/pr19319b.S: Likewise.
bfd/
* elfxx-mips.c (mips_elf_check_mips16_stubs): Set a stub's output
section to bfd_abs_section_ptr if the stub is discarded.
ld/testsuite/
* ld-mips-elf/mips16-fp-stub-1.s: New.
* ld-mips-elf/mips16-fp-stub-2.s: New.
* ld-mips-elf/mips16-fp-stub.d: New.
* ld-mips-elf/mips-elf.exp: Run new tests.
* ld-mips-elf/mips16-intermix.d: Update expected output.
https://sourceware.org/ml/binutils/2015-10/msg00137.html
bfd * bfd-in2.h: Regenerate.
* bfd-in.h (bfd_arm_stm32l4xx_fix): New enum. Specify how
STM32L4XX instruction scanning should be done.
(bfd_elf32_arm_set_stm32l4xx_fix)
(bfd_elf32_arm_stm32l4xx_erratum_scan)
(bfd_elf32_arm_stm32l4xx_fix_veneer_locations): Add prototypes.
(bfd_elf32_arm_set_target_relocs): Add stm32l4xx fix type argument
to prototype.
* elf32-arm.c (STM32L4XX_ERRATUM_VENEER_SECTION_NAME)
(STM32L4XX_ERRATUM_VENEER_ENTRY_NAME): Define macros.
(elf32_stm32l4xx_erratum_type): New enum.
(elf32_stm32l4xx_erratum_list): New struct. List of veneers or
jumps to veneers.
(_arm_elf_section_data): Add stm32l4xx_erratumcount,
stm32l4xx_erratumlist.
(elf32_arm_link_hash_table): Add stm32l4xx_erratum_glue_size,
stm32l4xx_fix and num_stm32l4xx_fixes fields.
(ctz): New function.
(popcount): New function.
(elf32_arm_link_hash_table_create): Initialize stm32l4xx_fix.
(put_thumb2_insn): New function.
(STM32L4XX_ERRATUM_LDM_VENEER_SIZE): Define. Size of a veneer for
LDM instructions.
(STM32L4XX_ERRATUM_VLDM_VENEER_SIZE): Define. Size of a veneer for
VLDM instructions.
(bfd_elf32_arm_allocate_interworking_sections): Initialise erratum
glue section.
(record_stm32l4xx_erratum_veneer) : New function. Create a single
veneer, and its associated symbols.
(bfd_elf32_arm_add_glue_sections_to_bfd): Add STM32L4XX erratum glue.
(bfd_elf32_arm_set_stm32l4xx_fix): New function. Set the type of
erratum workaround required.
(bfd_elf32_arm_stm32l4xx_fix_veneer_locations): New function. Find
out where veneers and branches to veneers have been placed in
virtual memory after layout.
(is_thumb2_ldmia): New function.
(is_thumb2_ldmdb): Likewise.
(is_thumb2_vldm ): Likewise.
(stm32l4xx_need_create_replacing_stub): New function. Decide if a
veneer must be emitted.
(bfd_elf32_arm_stm32l4xx_erratum_scan): Scan the sections of an
input BFD for potential erratum-triggering insns. Record results.
(bfd_elf32_arm_set_target_relocs): Set stm32l4xx_fix field in
global hash table.
(elf32_arm_size_dynamic_sections): Collect glue information.
(create_instruction_branch_absolute): New function.
(create_instruction_ldmia): Likewise.
(create_instruction_ldmdb): Likewise.
(create_instruction_mov): Likewise.
(create_instruction_sub): Likewise.
(create_instruction_vldmia): Likewise.
(create_instruction_vldmdb): Likewise.
(create_instruction_udf_w): Likewise.
(create_instruction_udf): Likewise.
(push_thumb2_insn32): Likewise.
(push_thumb2_insn16): Likewise.
(stm32l4xx_fill_stub_udf): Likewise.
(stm32l4xx_create_replacing_stub_ldmia): New function. Expands the
replacing stub for ldmia instructions.
(stm32l4xx_create_replacing_stub_ldmdb): Likewise for ldmdb.
(stm32l4xx_create_replacing_stub_vldm): Likewise for vldm.
(stm32l4xx_create_replacing_stub): New function. Dispatches the
stub emission to the appropriate functions.
(elf32_arm_write_section): Output veneers, and branches to veneers.
ld * ld.texinfo: Description of the STM32L4xx erratum workaround.
* emultempl/armelf.em (stm32l4xx_fix): New.
(arm_elf_before_allocation): Choose the type of fix, scan for
erratum.
(gld${EMULATION_NAME}_finish): Fix veneer locations.
(arm_elf_create_output_section_statements): Propagate
stm32l4xx_fix value.
(PARSE_AND_LIST_PROLOGUE): Define OPTION_STM32L4XX_FIX.
(PARSE_AND_LIST_LONGOPTS): Add entry for handling
--fix-stm32l4xx-629360.
(PARSE_AND_LIST_OPTION): Add entry for helping on
--fix-stm32l4xx-629360.
(PARSE_AND_LIST_ARGS_CASES): Treat OPTION_STM32L4XX_FIX.
tests * ld-arm/arm-elf.exp (armelftests_common): Add STM32L4XX
tests.
* ld-arm/stm32l4xx-cannot-fix-far-ldm.d: New.
* ld-arm/stm32l4xx-cannot-fix-far-ldm.s: Likewise.
* ld-arm/stm32l4xx-cannot-fix-it-block.d: Likewise.
* ld-arm/stm32l4xx-cannot-fix-it-block.s: Likewise.
* ld-arm/stm32l4xx-fix-all.d: Likewise.
* ld-arm/stm32l4xx-fix-all.s: Likewise.
* ld-arm/stm32l4xx-fix-it-block.d: Likewise.
* ld-arm/stm32l4xx-fix-it-block.s: Likewise.
* ld-arm/stm32l4xx-fix-ldm.d: Likewise.
* ld-arm/stm32l4xx-fix-ldm.s: Likewise.
* ld-arm/stm32l4xx-fix-vldm.d: Likewise.
* ld-arm/stm32l4xx-fix-vldm.s: Likewise.
Symbol symbol defined by an assignment in a linker script has type
bfd_link_hash_new. elf_i386_convert_load and elf_x86_64_convert_load
should check bfd_link_hash_new to see if a symbol is defined by a linker
script.
bfd/
PR ld/19175
* elf32-i386.c (elf_i386_convert_load): Check bfd_link_hash_new
instead of calling bfd_link_get_defined_symbol.
* elf64-x86-64.c (elf_x86_64_convert_load): Likewise. Skip
relocation overflow for bfd_link_hash_new.
* linker.c (bfd_link_get_defined_symbol): Removed.
* bfd-in2.h: Regenerated.
ld/testsuite/
PR ld/19175
* ld-i386/i386.exp: Run pr19175.
* ld-x86-64/x86-64.exp: Likewise.
* ld-i386/pr19175.d: New file.
* ld-i386/pr19175.s: Likewise.
* ld-i386/pr19175.t: Likewise.
* ld-x86-64/pr19175.d: Likewise.
* ld-x86-64/pr19175.s: Likewise.
* ld-x86-64/pr19175.t: Likewise.
Since __start_XXX and __stop_XXX symbols aren't defined when address
load is being converted, we need to check if there is an XXX output
section to get their section and value. This patch adds a new function,
bfd_link_get_defined_symbol, to search for the XXX output section to
check if __start_XXX and __stop_XXX symbols are defined.
bfd/
PR ld/19171
* elf32-i386.c (elf_i386_convert_load): Call
bfd_link_get_defined_symbol to check if a symbol is defined.
* elf64-x86-64.c (elf_x86_64_convert_load): Call
bfd_link_get_defined_symbol to get defined symbol section and
value.
* linker.c (bfd_link_get_defined_symbol): New function.
* bfd-in2.h: Regenerated.
ld/testsuite/
PR ld/19171
* ld-i386/lea1.s: Add tests for address load of __start_XXX
and __stop_XXX.
* ld-i386/mov1.s: Likewise.
* ld-x86-64/lea1.s: Likewise.
* ld-x86-64/mov1.s: Likewise.
* ld-i386/lea1a.d: Updated.
* ld-i386/lea1b.d: Likewise.
* ld-i386/lea1c.d: Likewise.
* ld-i386/mov1a.d: Likewise.
* ld-i386/mov1b.d: Likewise.
* ld-x86-64/lea1a.d: Likewise.
* ld-x86-64/lea1b.d: Likewise.
* ld-x86-64/lea1c.d: Likewise.
* ld-x86-64/lea1d.d: Likewise.
* ld-x86-64/lea1e.d: Likewise.
* ld-x86-64/lea1f.d: Likewise.
* ld-x86-64/mov1a.d: Likewise.
* ld-x86-64/mov1b.d: Likewise.
* ld-x86-64/mov1c.d: Likewise.
* ld-x86-64/mov1d.d: Likewise.
SEC_KEEP check in elf_gc_sweep was missing in commit:
commit bde6f3eb6d
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Jan 8 01:43:23 2010 +0000
Set SEC_KEEP on section XXX for undefined __start_XXX/__stop_XXX
bfd/
2010-01-07 H.J. Lu <hongjiu.lu@intel.com>
PR ld/11133
* elflink.c (_bfd_elf_gc_mark_hook): Check section XXX for
undefined __start_XXX/__stop_XXX in all input files and set
SEC_KEEP.
This patch adds SEC_KEEP check to elf_gc_sweep.
bfd/
PR ld/19161
* elflink.c (elf_gc_sweep): Always keep sections marked with
SEC_KEEP.
ld/testsuite/
PR ld/19161
* ld-gc/gc.exp: Run pr19161 test.
* ld-gc/pr19161-1.c: New file.
* ld-gc/pr19161-2.c: Likewise.
* ld-gc/pr19161.d: Likewise.
This patch adds support for the R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX relocations proposed in
https://groups.google.com/forum/#!topic/x86-64-abi/n9AWHogmVY0
to gas and ld. It updates gas to generate R_X86_64_GOTPCRELX,
R_X86_64_REX_GOTPCRELX if there is a REX prefix, relocation for memory
operand, foo@GOTPCREL(%rip). With the locally defined symbol, foo, we
convert
mov foo@GOTPCREL(%rip), %reg
to
lea foo(%rip), %reg
and convert
call/jmp *foo@GOTPCREL(%rip)
to
nop call foo/jmp foo nop
When PIC is false, convert
test %reg, foo@GOTPCREL(%rip)
to
test $foo, %reg
and convert
binop foo@GOTPCREL(%rip), %reg
to
binop $foo, %reg
where binop is one of adc, add, and, cmp, or, sbb, sub, xor instructions.
bfd/
* elf64-x86-64.c: Include opcode/i386.h.
(x86_64_elf_howto_table): Add R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX.
(R_X86_64_standard): Replace R_X86_64_PLT32_BND with
R_X86_64_REX_GOTPCRELX.
(x86_64_reloc_map): Add BFD_RELOC_X86_64_GOTPCRELX and
BFD_RELOC_X86_64_REX_GOTPCRELX.
(need_convert_mov_to_lea): Renamed to ...
(need_convert_load): This.
(elf_x86_64_check_relocs): Handle R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX. Replace need_convert_mov_to_lea with
need_convert_load.
(elf_x86_64_gc_sweep_hook): Handle R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX.
(elf_x86_64_size_dynamic_sections): Likewise.
(elf_x86_64_relocate_section): Likewise.
(elf_x86_64_convert_mov_to_lea): Renamed to ...
(elf_x86_64_convert_load): This. Replace need_convert_mov_to_lea
with need_convert_load. Support R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX transformations.
* reloc.c (BFD_RELOC_X86_64_GOTPCRELX): New.
(BFD_RELOC_X86_64_REX_GOTPCRELX): Likewise.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
gas/
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_X86_64_GOTPCRELX and BFD_RELOC_X86_64_REX_GOTPCRELX.
(tc_gen_reloc): Likewise.
(i386_validate_fix): Generate BFD_RELOC_X86_64_GOTPCRELX or
BFD_RELOC_X86_64_REX_GOTPCRELX if fx_tcbit2 is set.
* config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Also return
true for BFD_RELOC_X86_64_GOTPCRELX and
BFD_RELOC_X86_64_REX_GOTPCRELX.
gas/testsuite/
* gas/i386/i386.exp: Run x86-64-gotpcrel.
* gas/i386/x86-64-gotpcrel.d: New file.
* gas/i386/x86-64-gotpcrel.s: Likewise.
* gas/i386/ilp32/x86-64-gotpcrel.d: Likewise.
* gas/i386/x86-64-localpic.d: Replace R_X86_64_GOTPCREL with
R_X86_64_REX_GOTPCRELX.
* gas/i386/ilp32/x86-64-localpic.d: Likewise.
include/elf/
* x86-64.h (R_X86_64_GOTPCRELX): New.
(R_X86_64_REX_GOTPCRELX): Likewise.
ld/testsuite/
* ld-ifunc/ifunc-5r-local-x86-64.d: Replace R_X86_64_GOTPCREL
with R_X86_64_REX_GOTPCRELX.
* ld-x86-64/plt-main1.rd: Likewise.
* ld-x86-64/plt-main3.rd: Likewise.
* ld-x86-64/plt-main4.rd: Likewise.
* ld-x86-64/gotpcrel1.dd: New file.
* ld-x86-64/gotpcrel1.out: Likewise.
* ld-x86-64/gotpcrel1a.S: Likewise.
* ld-x86-64/gotpcrel1b.c: Likewise.
* ld-x86-64/gotpcrel1c.c: Likewise.
* ld-x86-64/gotpcrel1d.S: Likewise.
* ld-x86-64/load1.s: Likewise.
* ld-x86-64/load1a.d: Likewise.
* ld-x86-64/load1b.d: Likewise.
* ld-x86-64/load1c.d: Likewise.
* ld-x86-64/load1d.d: Likewise.
* ld-x86-64/x86-64.exp: Run load1a, load1b, load1c and load1d
tests. Run gotpcrel1 test.
This patch adds support for the R_386_GOT32X relocation proposed in
https://groups.google.com/forum/#!topic/ia32-abi/GbJJskkid4I
to gas and ld. It updates gas to generate R_386_GOT32X relocation for
memory operand, foo@GOT[(%reg)]. We must encode "mov foo@GOT, %eax"
with the 0x8b opcode, instead of the 0xb8 opcode, so that it can be
transformed to "lea foo, %eax". With the locally defined symbol, foo,
we convert
mov foo@GOT[(%reg1)], %reg2
to
lea foo[@GOTOFF(%reg1)], %reg2
and convert
call/jmp *foo@GOT[(%reg)]
to
nop call foo/jmp foo nop
When PIC is false, convert
test %reg1, foo@GOT[(%reg2)]
to
test $foo, %reg1
and convert
binop foo@GOT[(%reg1)], %reg2
to
binop $foo, %reg2
where binop is one of adc, add, and, cmp, or, sbb, sub, xor instructions.
bfd/
* elf32-i386.c: Include opcode/i386.h.
(elf_howto_table): Add R_386_GOT32X.
(R_386_ext2): Replace R_386_IRELATIVE with R_386_GOT32X.
(elf_i386_reloc_type_lookup): Handle BFD_RELOC_386_GOT32X.
(need_convert_mov_to_lea): Renamed to ...
(need_convert_load): This.
(elf_i386_check_relocs): Handle R_386_GOT32X. Replace
need_convert_mov_to_lea with need_convert_load.
(elf_i386_gc_sweep_hook): Handle R_386_GOT32X.
(elf_i386_size_dynamic_sections): Likewise.
(elf_i386_relocate_section): Likewise.
(elf_i386_convert_mov_to_lea): Renamed to ...
(elf_i386_convert_load): This. Replace need_convert_mov_to_lea
with need_convert_load. Support R_386_GOT32X transformations.
* reloc.c (BFD_RELOC_386_GOT32X): New.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
gas/
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_386_GOT32X.
(tc_gen_reloc): Likewise.
(match_template): Force 0x8b encoding for "mov foo@GOT, %eax".
(output_disp): Check for "call/jmp *mem", "mov mem, %reg",
"test %reg, mem" and "binop mem, %reg" where binop is one of
adc, add, and, cmp, or, sbb, sub, xor instructions. Set
fx_tcbit if the REX prefix is generated. Set fx_tcbit2 if
BFD_RELOC_386_GOT32X should be generated.
(i386_validate_fix): Generate BFD_RELOC_386_GOT32X if fx_tcbit2
is set.
gas/testsuite/
* gas/i386/got.d: New file.
* gas/i386/got.s: Likewise.
* gas/i386/i386.exp: Run got.
* gas/i386/localpic.d: Replace R_386_GOT32 with R_386_GOT32X.
* gas/i386/mixed-mode-reloc32.d: Likewise.
* gas/i386/reloc32.d: Likewise.
include/elf/
* i386.h (R_386_GOT32X): New relocation.
ld/testsuite/
* ld-i386/branch1.d: New file.
* ld-i386/branch1.s: Likewise.
* ld-i386/call1.d: Likewise.
* ld-i386/call1.s: Likewise.
* ld-i386/call2.d: Likewise.
* ld-i386/call2.s: Likewise.
* ld-i386/got1.dd: Likewise.
* ld-i386/got1.out: Likewise.
* ld-i386/got1a.S: Likewise.
* ld-i386/got1b.c: Likewise.
* ld-i386/got1c.c: Likewise.
* ld-i386/got1d.S: Likewise.
* ld-i386/jmp1.d: Likewise.
* ld-i386/jmp1.s: Likewise.
* ld-i386/jmp2.d: Likewise.
* ld-i386/jmp2.s: Likewise.
* ld-i386/load1.d: Likewise.
* ld-i386/load1.s: Likewise.
* ld-i386/load2.d: Likewise.
* ld-i386/load2.s: Likewise.
* ld-i386/load3.d: Likewise.
* ld-i386/load3.s: Likewise.
* ld-i386/load4.s: Likewise.
* ld-i386/load4a.d: Likewise.
* ld-i386/load4b.d: Likewise.
* ld-i386/load5.s: Likewise.
* ld-i386/load5a.d: Likewise.
* ld-i386/load5b.d: Likewise.
* ld-i386/load6.d: Likewise.
* ld-i386/load6.s: Likewise.
* ld-i386/i386.exp: Run branch1, call1, call2, jmp1, jmp2,
load1, load2, load3, load4a, load4b, load5a, load5b and load6
tests. Run got1 test.
There is no need to check def_regular when converting mov to lea for
loading address of local symbols since def_regular may be false for
common symbols and SYMBOL_REFERENCES_LOCAL is sufficient.
bfd/
* elf32-i386.c (elf_i386_convert_mov_to_lea): Don't check
def_regular.
* elf64-x86-64.c (elf_x86_64_convert_mov_to_lea): Likewise.
ld/testsuite/
* ld-i386/lea1.s: Add a test for loading address of local common
symbol.
* ld-x86-64/lea1.s: Likewise.
* ld-i386/lea1a.d: Updated.
* ld-i386/lea1b.d: Likewise.
* ld-i386/lea1c.d: Likewise.
* ld-x86-64/lea1a.d: Likewise.
* ld-x86-64/lea1b.d: Likewise.
* ld-x86-64/lea1c.d: Likewise.
* ld-x86-64/lea1d.d: Likewise.
* ld-x86-64/lea1e.d: Likewise.
* ld-x86-64/lea1f.d: Likewise.
Run the test for more than just ELF. Shows that objcopy --extract-symbol
isn't working on PE, mips, mmix and some aout targets.
* config/default.exp (size): New global.
* ld-elf/extract-symbol-1.s,
* ld-elf/extract-symbol-1.ld,
* ld-elf/extract-symbol-1sec.d,
* ld-elf/extract-symbol-1sym.d: Delete.
* ld-scripts/script.exp (extract_symbol_test): New.
We may see an unversioned definition after the default version. We
should skip the unversioned definition in this case.
bfd/
PR ld/19073
* elflink.c (_bfd_elf_add_default_symbol): Skip the unversioned
definition after the default version.
ld/testsuite/
PR ld/19073
* ld-elf/pr19073.map: New file.
* ld-elf/pr19073.rd: Likewise.
* ld-elf/pr19073.s: Likewise.
* ld-elf/shared.exp (build_tests): Add tests for PR ld/19073.
For ELF linker, a common symbol isn't a definition. When we decide if a
symbol should be re-exported, we should check if the symbol isn't
undefined, not if it is a definition.
bfd/
PR ld/18914
* elflink.c (elf_link_add_object_symbols): Don't re-export a
symbol if it isn't undefined.
ld/testsuite/
PR ld/18914
* ld-elf/exclude.exp: Also check exclude_common.
* ld-elf/exclude2.s: Add exclude_common.
bfd/
2015-10-02 Renlin Li <renlin.li@arm.com>
* elfnn-aarch64.c (IS_AARCH64_TLS_RELAX_RELOC): Add
TLSIE_MOVW_GOTTPREL_G1.
(aarch64_tls_transition_without_check): Add
TLSIE_MOVW_GOTTPREL_G1 to TLSLE_MOVW_TPREL_G2
transition for local symbol.
(elfNN_aarch64_tls_relax): Add a argument to pass tp offset.
Add TLSIE_MOVW_GOTTPREL_G1 relaxation.
(elfNN_aarch64_relocate_section): Call elfNN_aarch64_tls_relax
with new argument.
ld/testsuite/
2015-10-02 Renlin Li <renlin.li@arm.com>
* ld-aarch64/aarch64-elf.exp (tls-relax-large-le-ie): Run new test.
* ld-aarch64/tls-relax-large-ie-le.d: New.
* ld-aarch64/tls-relax-large-ie-le.s: New.
bfd/
2015-10-02 Renlin Li <renlin.li@arm.com>
* elfnn-aarch64.c(IS_AARCH64_TLS_RELAX_RELOC):
Add relaxation support for TLSGD_MOVW_G0_NC and TLSGD_MOVW_G1.
(aarch64_tls_transition_without_check): Likewise
(elfNN_aarch64_tls_relax): Likwise.
ld/testsuite/
2015-10-02 Renlin Li <renlin.li@arm.com>
* ld-aarch64/aarch64-elf.exp: run new test
* ld-aarch64/tls-relax-large-gd-ie.d: New.
* ld-aarch64/tls-relax-large-gd-ie.s: New.
* ld-aarch64/tls-relax-large-gd-le.d: New.
* ld-aarch64/tls-relax-large-gd-le.s: New.
Since something like ".long foo - ." may be used as pointer, we make
sure that PLT is used if foo is a function defined in a shared library.
bfd/
PR ld/19031
* elf64-x86-64.c (elf_x86_64_check_relocs): Set
pointer_equality_needed for R_X86_64_PC32 reloc in non-code
sections.
ld/testsuite/
PR ld/19031
* ld-x86-64/x86-64.exp: Run PR ld/19031 test.
* ld-x86-64/pr19031.out: New file.
* ld-x86-64/pr19031a.c: Likewise.
* ld-x86-64/pr19031b.S: Likewise.
* ld-x86-64/pr19031c.c: Likewise.
Since something like ".long foo - ." may be used as pointer, we make
sure that PLT is used if foo is a function defined in a shared library.
bfd/
PR ld/19031
* elf32-i386.c (elf_i386_check_relocs): Set
pointer_equality_needed for R_386_PC32 reloc in non-code
sections.
ld/testsuite/
PR ld/19031
* ld-i386/i386.exp: Run PR ld/19031 test.
* ld/testsuite/ld-i386/pr19031.out: New file.
* ld/testsuite/ld-i386/pr19031a.c: Likewise.
* ld/testsuite/ld-i386/pr19031b.S: Likewise.
* ld/testsuite/ld-i386/pr19031c.c: Likewise.
When we check consistency for merge ELF sections, we should not only
check EI_CLASS, but also compatible e_machine.
bfd/
PR ld/19013
* elflink.c (_bfd_elf_merge_sections): Only merge input bfds
that have the compatible ELF machine code with the output bfd.
ld/testsuite/
PR ld/19013
* ld-x86-64/pr19013-nacl.d: New file.
* ld-x86-64/pr19013-x32.d: Likewise.
* ld-x86-64/pr19013.d: Likewise.
* ld-x86-64/pr19013.s: Likewise.
* ld-x86-64/x86-64.exp: Run PR ld/19013 tests.
In objcopy, copy_object calls copy_section to copy contents of input
section to output section. When --gap-fill= is used, objcopy extends
the size of output sectios to fill gaps between output sections with
gap fills. In this case, we adjust the output section size to skip
gap files to avoid reading beypond the input section buffer before
calling copy_section and restore the output section size after input
sections have been copied.
binutils/
PR binutils/19005
* objcopy.c (copy_object): Adjust the output section size to
skip gap fills between sections when copying from input sections
to output sections.
ld/testsuite/
PR binutils/19005
* ld-elf/pr19005.d: New file.
* ld-elf/pr19005.s: Likewise.
* ld-elf/pr19005.t: Likewise.
gas PR ld/18759
* config/tc-or1k.c (tc_gen_reloc): Correct computation of PC
relative relocs.
* config/tc-or1k.h (GAS_CGEN_PRCEL_R_TYPE): Delete.
bfd * elf32-or1k.c (R_OR1K_32_PCREL): Set pcrel_offset to TRUE.
(R_OR1K_16_PCREL): Likewise.
(R_OR1K_8_PCREL): Likewise.
ld/tests * ld-elf/eh-frame-hdr: Expect to pass on the or1k-linux target.
Since linker now sets the DF_1_PIE bit in the DT_FLAGS_1 tag for PIE,
we need to update MIPS PIE tests for it.
* ld-mips-elf/pie-n32.d: Updated.
* ld-mips-elf/pie-n64.d: Likewise.
* ld-mips-elf/pie-o32.d: Likewise.
Giving linker script symbols defined outside of output sections a
section-relative value early, leads to them being used in expressions
as if they were defined inside an output section. This can mean loss
of the section VMA, and wrong results.
ld/
PR ld/18963
* ldexp.h (struct ldexp_control): Add rel_from_abs.
(ldexp_finalize_syms): Declare.
* ldexp.c (new_rel_from_abs): Keep absolute for expressions
outside of output section statements. Set rel_from_abs.
(make_abs, exp_fold_tree, exp_fold_tree_no_dot): Clear rel_from_abs.
(struct definedness_hash_entry): Add final_sec, and comment.
(update_definedness): Set final_sec.
(set_sym_sections, ldexp_finalize_syms): New functions.
* ldlang.c (lang_process): Call ldexp_finalize_syms.
ld/testsuite
PR ld/18963
* ld-scripts/pr18963.d,
* ld-scripts/pr18963.t: New test.
* ld-scripts/expr.exp: Run it.
* ld-elf/provide-hidden-2.ld: Explicitly make "dot" absolute.
* ld-mips-elf/gp-hidden.sd: Don't care about _gp section.
* ld-mips-elf/no-shared-1-n32.d: Don't care about symbol shown at
start of .data section.
* ld-mips-elf/no-shared-1-n64.d: Likewise.
* ld-mips-elf/no-shared-1-o32.d: Likewise.
Weak defined function is turned into non-weak defined function by
"ld -r -flto" with GCC 5 due to a GCC 5 regression:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67548
Add "ld -r" tests for PR ld/15323 to make sure that any linker change
won't introduce linker regression for PR ld/15323.
* ld-plugin/lto.exp (lto_link_tests): Add a "ld -r" test for
PR ld/15323.
(lto_run_tests): Add a "ld -r" test for PR ld/15323.
The new orphan handling tests added in commit c005eb9 fail on a range of
targets. Some of the failures were fixed in commit e32aa93 but not
all. This commit should address the remaining failures.
Update results to account for orphan sections being placed in different
orders, and for other, target specific sections, being discarded.
ld/testsuite/ChangeLog:
* ld-elf/orphan-7.map: Allow for other discarded sections.
* ld-elf/orphan-8.map: Updated to allow for different section
ordering on different targets.
* ld-elf/orphan.ld: Place .sbss section.
Replace the options --warn-orphan and --no-warn-orphan with a single
option --orphan-handling=MODE, where mode can be place, warn, error, and
discard.
Mode 'place' is the default, and is the current behaviour, placing the
orphan section into a suitable output section.
Mode 'warn' is the same as '--warn-orphan'. The orphan is also placed
using the same algorithm as for 'place'.
Mode 'error' is the same as '--warn-orphan' and '--fatal-warnings'.
Mode 'discard' assigns all output sections to the /DISCARD/ section.
ld/ChangeLog:
* ld.h (enum orphan_handling_enum): New.
(ld_config_type): Remove warn_orphan, add orphan_handling.
* ldemul.c (ldemul_place_orphan): Remove warning about orphan
sections.
* ldlang.c (ldlang_place_orphan): New function.
(lang_place_orphans): Call ldlang_place_orphan.
* ldlex.h (enum option_values): Remove OPTION_WARN_ORPHAN and
OPTION_NO_WARN_ORPHAN, add OPTION_ORPHAN_HANDLING.
* lexsup.c (ld_options): Remove 'warn-orphan' and
'no-warn-orphan', add 'orphan-handling'.
(parse_args): Remove handling for OPTION_WARN_ORPHAN and
OPTION_NO_WARN_ORPHAN, add handling for OPTION_ORPHAN_HANDLING.
* NEWS: Replace text about --warn-orphan with --orphan-handling.
* ld.texinfo (Options): Remove --warn-orphan entry and add
entry on --orphan-handling.
(Orphan Sections): Add reference to relevant command line options.
ld/testsuite/ChangeLog:
* ld-elf/elf.exp: Switch to rely on run_dump_test.
* ld-elf/orphan-5.l: Update expected output.
* ld-elf/orphan-5.d: New file.
* ld-elf/orphan-6.d: New file.
* ld-elf/orphan-6.l: New file.
* ld-elf/orphan-7.d: New file.
* ld-elf/orphan-7.map: New file.
* ld-elf/orphan-8.d: New file.
* ld-elf/orphan-8.map: New file.
We use its PLT entry to initialize function pointer at run-time. If
there is no other usage for the PLT entry, we can generate run-time
function pointer relocations in read-write section, which can be
resolved by dynamic linker, to initialize function pointers. It avoids
the extra indirect branch overhead in PLT.
bfd/
PR ld/18900
* elf32-i386.c (elf_i386_link_hash_entry): Add
func_pointer_refcount.
(elf_i386_link_hash_newfunc): Clear func_pointer_refcount.
(elf_i386_get_local_sym_hash): Likewise.
(elf_i386_copy_indirect_symbol): Also copy
func_pointer_refcount.
(elf_i386_check_relocs): Increment func_pointer_refcount.
(elf_i386_gc_sweep_hook): Decrement func_pointer_refcount.
(elf_i386_allocate_dynrelocs): Don't create the PLT entry if
there are only function pointer relocations which can be
resolved at run-time. Keep dynanamic relocations for run-time
function pointer initialization.
(elf_i386_relocate_section): Copy dynamic function pointer
relocations.
* elf64-x86-64.c (elf_x86_64_link_hash_entry): Add
func_pointer_refcount.
(elf_x86_64_link_hash_newfunc): Clear func_pointer_refcount.
(elf_x86_64_get_local_sym_hash): Likewise.
(elf_x86_64_copy_indirect_symbol): Also copy
func_pointer_refcount.
(elf_x86_64_check_relocs): Increment func_pointer_refcount.
(elf_x86_64_gc_sweep_hook): Decrement func_pointer_refcount.
(elf_x86_64_allocate_dynrelocs): Don't create the PLT entry if
there are only function pointer relocations which can be
resolved at run-time. Keep dynanamic relocations for run-time
function pointer initialization.
(elf_x86_64_relocate_section): Copy dynamic function pointer
relocations.
ld/testsuite/
PR ld/18900
* ld-i386/i386.exp: Run tests for PR ld/18900.
* ld-x86-64/x86-64.exp: Likewise.
* ld-i386/pr18900.out: New file.
* ld-i386/pr18900a.c: Likewise.
* ld-i386/pr18900a.c: Likewise.
* ld-i386/pr18900a.rd: Likewise.
* ld-i386/pr18900b.c: Likewise.
* ld-i386/pr18900b.rd: Likewise.
* ld-i386/pr18900c.c: Likewise.
* ld-x86-64/pr18900.out: Likewise.
* ld-x86-64/pr18900a.c: Likewise.
* ld-x86-64/pr18900a.rd: Likewise.
* ld-x86-64/pr18900b.c: Likewise.
* ld-x86-64/pr18900b.rd: Likewise.
* ld-x86-64/pr18900c.c: Likewise.
* ld-x86-64/mpx3.dd: Updated.
bfd PR ld/18401
* elfxx-mips.c (bfd_mips_isa_ext_mach): New function: Converts an
ISA value to a bfd machine number.
(bfd_mips_isa_ext): Update the ISA level and revision if
necessary. Use mips_mach_extends_p to decide if the ISA extension
needs to be set.
(_bfd_mips_elf_merge_private_bfd_data): Allow the ISA extension to
be inferred from the ABI setting. Set the ISA level from the
maximum of the incoming and outgoing ISA levels.
tests
* ld-mips-elf/mips-elf-flags.exp: Add more ISA conflict tests.
To load an ELF binary with DT_TEXTREL tag, the dynamic linker calls
__mprotect on the read-only segment with PROT_READ|PROT_WRITE before
applying dynamic relocation. It leads to segfault when performing
IFUNC relocations since the read-only segment has no execute permission.
This patch changes x86 linker to issue an error for read-only segment
with dynamic IFUNC relocations. Other backends with IFUNC support
may need a similar change.
bfd/
PR ld/18801
* elf32-i386.c (elf_i386_size_dynamic_sections): Issue an error
for read-only segment with dynamic IFUNC relocations.
* elf64-x86-64.c (elf_x86_64_size_dynamic_sections): Likewise.
ld/testsuite/
PR ld/18801
* ld-i386/i386.exp: Run pr18801.
* ld-x86-64/x86-64.exp: Likewise.
* ld-i386/pr18801.d: New file.
* ld-i386/pr18801.s: Likewise.
* ld-x86-64/pr18801.d: Likewise.
* ld-x86-64/pr18801.s: Likewise.
Since the backend elf_add_symbol_hook isn't called on local symbols,
the EI_OSABI field isn't to ELFOSABI_GNU where are local IFUNC symbols.
This patch changes the x86 backends to set has_gnu_symbols if there are
relocations against IFUNC symbols. Other backends with IFUNC support
may need a similar change.
This patch also changes the type of has_gnu_symbols from bfd_boolean to
enum elf_gnu_symbols.
bfd/
PR ld/18815
* elf-bfd.h (elf_gnu_symbols): New enum.
(elf_obj_tdata): Use elf_gnu_symbols on has_gnu_symbols.
* elf-s390-common.c (elf_s390_add_symbol_hook): Set
has_gnu_symbols to elf_gnu_symbol_any.
* elf32-arm.c (elf32_arm_add_symbol_hook): Likewise.
* elf32-m68k.c (elf_m68k_add_symbol_hook): Likewise.
* elf32-ppc.c (ppc_elf_add_symbol_hook): Likewise.
* elf32-sparc.c (elf32_sparc_add_symbol_hook): Likewise.
* elf64-ppc.c (ppc64_elf_add_symbol_hook): Likewise.
* elf64-sparc.c (elf64_sparc_add_symbol_hook): Likewise.
* lfxx-aarch64.c (_bfd_aarch64_elf_add_symbol_hook): Likewise.
* elf32-i386.c (elf_i386_check_relocs): Update has_gnu_symbols
if there are relocations against IFUNC symbols.
(elf_i386_add_symbol_hook): Don't check STT_GNU_IFUNC here.
* elf64-x86-64. (elf_x86_64_check_relocs): Update has_gnu_symbols
if there are relocations against IFUNC symbols.
(elf_x86_64_add_symbol_hook): Don't check STT_GNU_IFUNC here.
ld/testsuite/
PR ld/18815
* ld-i386/i386.exp: Run pr18815.
* ld-x86-64/x86-64.exp: Likewise.
* ld-i386/pr18815.d: New file.
* ld-i386/pr18815.s: Likewise.
* ld-x86-64/pr18815.d: Likewise.
* ld-x86-64/pr18815.s: Likewise.
This patch fixed those failures on elf configuration by:
* Improve the ILP32 target selector "aarch64_choose_ilp32_emul",
makes it more robust. Target triples copied from configure.tgt
* Updated emit-relocs-86/-overflow.d to use aarch64_choose_ilp32_emul
which is following what have done with emit-relocs-28.
* Those instruction encoding mismatch is because those encoding
contains pc-relative address. As for elf, we may have different
start address. relaxed encodind check, especially for
aarch64-farcall-b/bl-plt, as the main purpose of those check are
ELF text/data layout, we just want to make sure veneer to plt stub
is generated.
2015-08-12 Jiong Wang <jiong.wang@arm.com>
ld/testsuite/
* ld-aarch64/aarch64-elf.exp (aarch64_choose_ilp32_emul): Support all
four triple shapes: aarch64-*-linux*, aarch64-*-elf,
aarch64_be-*-linux*, aarch64_be-*-elf.
* ld-aarch64/emit-relocs-86.d: Use aarch64_choose_ilp32_emul.
* ld-aarch64/emit-relocs-86-overflow.d: Likewise.
* ld-aarch64/ld-aarch64/farcall-b-plt.d: Relax instrucion encoding
check when they reflect address.
* ld-aarch64/ld-aarch64/farcall-bl-plt.d: Likewise.
2015-08-11 Jiong Wang <jiong.wang@arm.com>
bfd/
* bfd/elfnn-aarch64.c (aarch64_type_of_stub): New parameter "sym_sec".
Loose the check for symbol from ABS section.
(elfNN_aarch64_size_stubs): Pass sym_sec.
ld/testsuite/
* ld-aarch64/farcall-b-defsym.s: New test.
* ld-aarch64/farcall-bl-defsym.s: Likewise.
* ld-aarch64/farcall-b-defsym.d: New expectation.
* ld-aarch64/farcall-bl-defsym.d: Likewise.
The hidden versioned symbol can only be merged with the versioned
symbol with the same symbol version. _bfd_elf_merge_symbol should
check the symbol version before merging the new hidden versioned
symbol with the existing symbol. _bfd_elf_link_hash_copy_indirect can't
copy any references to the hidden versioned symbol. We need to
bind a symbol locally when linking executable if it is locally defined,
hidden versioned, not referenced by shared library and not exported.
bfd/
PR ld/18720
* elflink.c (_bfd_elf_merge_symbol): Add a parameter to indicate
if the new symbol matches the existing one. The new hidden
versioned symbol matches the existing symbol if they have the
same symbol version. Update the existing symbol only if they
match.
(_bfd_elf_add_default_symbol): Update call to
_bfd_elf_merge_symbol.
(_bfd_elf_link_assign_sym_version): Don't set the hidden field
here.
(elf_link_add_object_symbols): Override a definition only if the
new symbol matches the existing one.
(_bfd_elf_link_hash_copy_indirect): Don't copy any references to
the hidden versioned symbol.
(elf_link_output_extsym): Bind a symbol locally when linking
executable if it is locally defined, hidden versioned, not
referenced by shared library and not exported. Turn on
VERSYM_HIDDEN only if the hidden vesioned symbol is defined
locally.
ld/testsuite/
PR ld/18720
* ld-elf/indirect.exp: Run tests for PR ld/18720.
* ld-elf/pr18720.out: New file.
* ld-elf/pr18720a.c: Likewise.
* ld-elf/pr18720b.c: Likewise.
* ld-elf/pr18720c.c: Likewise.
When using run_dump_test with the map option to compare the linker map
file produced, no additional dump program should be required. A dump
program can still be given if needed, but leaving it off will no longer
produce an error.
ld/testsuite/ChangeLog:
* ld/ld-lib.exp (run_dump_test): When using the map option, no
program is required.
The run_dump_test mechanism supports options error and warning, which
allow regexp to be specified within the test file, these regexp are
matched against the stderr output from the linker.
Similar dump test style functions for gas and gdb also support file
based matching versions of these options; the patterns are placed into a
file which the test driver then references. It is sometimes clearer,
when the pattern to be matched spans multiple lines if the patterns can
be placed into a separate file.
This patch adds new options error_output and warning_output for the
linker run_dump_test function. These new options take a filename
parameter, this file is then used (with regexp_diff) to compare against
the linker output.
ld/testsuite/ChangeLog:
* ld/ld-lib.exp (run_dump_test): Add error_output and
warning_output options.
Add a new command line option '--require-defined' to the linker. This
option operates identically to the '--undefined' option, except that if
the symbol is not defined in the final output file then the linker will
exit with an error.
When making use of --gc-section, or just when trying to pull in parts of
a library, it is not uncommon for a user to use the '--undefined'
command line option to specify a symbol that the user then expects to be
defined by one of the object files supplied to the link.
However, if for any reason the symbol is not satisfied by an object
provided to the link the user will be left with an undefined symbol in
the output file, instead of a defined symbol.
In some cases the above behaviour is what the user wants, in other cases
though we can do better. The '--require-defined' option tries to fill
this gap. The symbol passed to the '--require-defined' option is
treated exactly as if the symbol was passed to '--undefined', however,
before the linker exits a check is made that all symbols passed to
'--require-defined' are actually defined, if any are not then the link
will fail with an error.
ld/ChangeLog:
* ld.texinfo (Options): Document --require-defined option.
* ldlang.c (struct require_defined_symbol): New structure.
(require_defined_symbol_list): New variable.
(ldlang_add_require_defined): New function.
(ldlang_check_require_defined_symbols): New function.
(lang_process): Check required symbols are defined.
* ldlang.h (ldlang_add_require_defined): Declare.
* ldlex.h (enum option_values): Add OPTION_REQUIRE_DEFINED_SYMBOL.
* lexsup.c (ld_options): Add '--require-defined' entry.
(parse_args): Handle '--require-defined' entry.
* NEWS: Mention new '--require-defined' option.
ld/testsuite/ChangeLog:
* ld-undefined/require-defined-1.d: New file.
* ld-undefined/require-defined-2.d: New file.
* ld-undefined/require-defined-3.d: New file.
* ld-undefined/require-defined-4.d: New file.
* ld-undefined/require-defined-5.d: New file.
* ld-undefined/require-defined.exp: New file.
* ld-undefined/require-defined.s: New file.
We should change the default symbol for the versioned symbol only when
not performing a relocatable link.
bfd/
PR ld/18735
* elflink.c (_bfd_elf_add_default_symbol): Add the default
symbol if not performing a relocatable link.
(elf_link_add_object_symbols): Adjust the default symbol if
not performing a relocatable link.
ld/testsuite/
PR ld/18735
* ld-elf/pr18735.d: New file.
* ld-elf/pr18735.s: Likewise.
noclone attribute was added to GCC 4.5. We should check GCC version
before using it.
* ld-elf/pr18718.c (bar): Use noclone attribute only for GCC
4.5 or newer.
Maciej W. Rozycki
Alan Modra
Nick Clifton
H.J. Lu
Graham Markall
Thomas Preud'homme
Senthil Kumar Selvaraj
Cupertino Miranda
Denis Chertykov
Andreas Krebbel
Christian Groessler
Claudiu Zissulescu
Christophe Lyon
Christophe Monat
Pitchumani Sivanupandi
Jiong Wang
Matthew Fortune
Andrew Burgess
Mickael Guene
Renlin Li
Walfred Tedeschi
Yury Usishchev
Christophe Lyon
Jan Beulich
Marcus Shawcroft
Peter Bergner
Catherine Moore
Laurent Alfonsi
Hans-Peter Nilsson
Simon Dardis
Peter Zotov