* wrapper.c: Include config.h before system header files.
* callback.c: Include config.h before system header files.
* cgen-trace.c: Likewise.
* cgen-utils.c: Likewise.
* gentmap.c: Likewise.
* sim-if.c: Include config.h before system header files.
* compile.c: Include config.h before system header files.
* sim-main.h: Likewise.
* gdb-if.c: Include config.h before system header files.
* load.c: Likewise.
* syscalls.c: Likewise.
* trace.c: Likewise.
* interp.c: Include config.h before system header files.
The common code has a sim_core_trans_addr() helper that only the m32r code
uses. Move the inline extern in the m32r code to the proper common header.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Before POSIX standardized strsignal(), old systems would hide the
prototype unless the normal extension defines were enabled. So use
the AC_USE_SYSTEM_EXTENSIONS helper for that.
Then make sure we include string.h ourselves in nrun.c rather than
relying on implicit includes via other sim headers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The sim code gets the logic for SIM_AC_OPTION_WARNINGS from gdb, but
it hasn't been updated in a good long while. Sync with the latest
gdb code.
There is a sim specific change in here: we disable -Werror for now.
This is because all sim code atm contains warnings. Will probably
have to slowly add a white list of targets which can tolerate this
until everyone is updated.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This isn't entirely correct in that it assumes the signal numbering of
the target and host match, but seeing as we already make that assumption
in a few places, this patch doesn't make the situation any worse.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Trying to run `headers` in an out-of-tree build fails atm due to the
relative srcdir paths being used in a location other than where they
were setup to be used from. Get abs_srcdir from configure and use
that instead where applicable.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Building the sim on a sparc-solaris 2.8 machine fails when configured
with no extra sim hardware:
> for hw in ; do \
> echo "extern const struct hw_descriptor
> dv_${hw}_descriptor[];" ; \
> done >> tmp-hw.h
> echo 'const char version[] = "'"`sed q
> /[...]/../../gdb/version.in`"'";'
> >> version.c-tmp
> /bin/sh: -c: line 1: syntax error near unexpected token `;'
> /bin/sh: -c: line 1: `for hw in ; do \'
> make[3]: *** [hw-config.h] Error 2
The same thing happens with the version of bash that we got from
Sun as well (which is very old: 2.03.0(1)-release).
The problems comes from the fact that both shells are buggy, and
reject the following script:
for hw in ; do
[...]
done
The above is what sim/common/Makefile.in tries to execute when
generating hw-config.h.
In order to allow users to build out of the box on these machines,
this patch works around this bug. It does rely on the fact that
none of the tokens in SIM_HW contain whitespaces.
sim/common/ChangeLog:
* Make-common.in (hw-config.h): Work around bug in Solaris 2.8
system bourne shell.
The common sim code provides a useful "get_string" function which reads
a C string out of the target's memory space. So rename and export it
for other people to use.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Lift the code that GDB is using to generate dependencies on the fly and
port it over to the sim. Now people shouldn't have to manually maintain
these in their Makefile's.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Some systems (like OS X) do not have posix_fallocate. Add a configure
check for it before we try to use it. This is less work than trying
to support old systems.
URL: http://sourceware.org/bugzilla/show_bug.cgi?id=13161
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Automake likes to dump macros automatically used into the aclocal.m4
file, but the common/aclocal.m4 naming prevents that. So rename it
to the more normal "acinclude.m4" so the aclocal tool can work.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Now that the sourceware tree generally requires autoconf-2.64, update
the sim tree to require that too.
This allows us to drop the long standing SIM_AC_COMMON/common.m4
workaround as autoconf 2.64+ seems to work for me.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The dv-cfi code uses the bool type but doesn't include the stdbool.h
header. I didn't notice for Blackfin targets as the core Blackfin
header will include stdbool.h, but most targets don't do this.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The "devices.h" header is Blackfin-specific, so trying to build dv-cfi
for any other target fails. Include the specific hw headers this file
needs directly.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Seems some fixes were added to the common.m4 file but not the
SIM_AC_COMMON macro. Keep the two in sync since they're supposed
to be the same thing.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The sim_args_command prototype is in sim-options.h, so pull it in
directly rather than assuming a common header does it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Shell code before AC_INIT will be silently culled, and since the common
aclocal.m4 includes inline shell code, the file cannot be included before
AC_INIT. So update the example to show people including the file after
that rather than before to avoid random breakage.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The autoconf guys point out that our usage of AC_PROG_CC in the
SIM_AC_COMMON does not jive with their intended use.
http://www.gnu.org/software/autoconf/manual/autoconf.html#Expanded-Before-Required
So utilize AC_REQUIRE to make the warnings go away and generate
the correct code with different autoconf versions.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Since sim_do_command for many people simply calls sim_args_command, start
a unified version of it. For people who handle their own options, they
could switch to this by using sim_add_option_table instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The current --sysroot parsing attempts to keep from leaking memory by
treating the empty string specially (sine this is the initial value),
but it ends up leaking memory when the arg is an empty string. So if
someone uses --sysroot "", the old value is leaked, as is the new one.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
A semi-recent change which regenerated nltvals.def somehow missed all of
the Blackfin syscalls. So regenerate against the latest tree to get them
back.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
It's useful to be able to trace just the system calls the simulated
program is calling, so add a new --trace-syscall option for ports to
leverage if they choose.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Some Blackfin parts tie a bunch of interrupt lines into a single OR
gate before feeding the result into the SIC. The glue-or device in
the sim provides a nice way of modeling this exact behavior. At the
moment though, it requires the device to be mapped into the address
space so that things could write to it directly. This is not needed
for the Blackfin usage, so make it optional. Now the glue devices
can be used to simply tie interrupt lines together.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The glue device has a bunch of "todos" for the misc bitwise devices.
So implement two for fun -- the glue-or and glue-xor.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
For now, only the sub-command name is completed. No support yet for
completing options to that command. But even this is a huge step as
currently, nothing is completed, and the basic "help sim" is fairly
obtuse as to what exactly the "sim" command accepts.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This simulates a CFI flash. Its pretty configurable via the device
tree. For now, only basic read/write/erase operations are supported
for the Intel command set, but it's easy enough to extend support.
It's certainly enough to trick Das U-Boot into using it for probing,
reading, writing, and erasing.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This can boot Das U-Boot and a Linux kernel. It also supports Linux
userspace FLAT and FDPIC (dynamic and static) ELFs.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The sim keeps track of which allocations are zero-ed internally (via
zalloc) and then calls a helper "zfree" function rather than "free".
But this "zfree" function simply calls "free" itself. Since I can
see no point in this and it is simply useless overhead, punt it.
The only real change is in hw-alloc.c where we remove the zalloc_p
tracking, and sim-utils.c where zfree is delete. The rest of the
changes are a simple `sed` from "zfree" to "free".
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The sim-events code jumps through some hoops to avoid using 64bit math
to manage the current time. One fundamental assumption here is that by
constantly scheduling the sim poll event a short time into the future,
the 64bit difference will always fall into a signed 32bit value. This
does work most of the time, except for when processing the sim poll event
itself.
Normally, sim_events_process() will dequeue the sim poll event, update
the current time (time_from_event) according to the next pending event,
process the sim poll event (which will then requeue the sim poll event),
and then continue on.
The problem here of course is that the current time is updated in that
small window before the sim poll event gets a chance to reschedule itself.
So if the 64bit difference between the current time and the next event
does not fit into the signed 32bit value, time_from_event overflows, and
the internal assert at the end of update_time_from_event() triggers.
Since attempts at tweaking sim_events_process() logic introduced other
subtle bugs (due to tangled assumptions between most pieces of the sim
time keeping code), change the time_from_event to a real 64bit value.
Tests on my system between a 32bit ELF and a 64bit ELF show no practical
difference (it's all lost in the system noise). Basically, I booted a
Linux kernel to userspace and then paniced it; this gave me a constant
sample size of about 18 million insns.
This was noticed when simulating Blackfin Das U-Boot. The simulated core
timer is given the max unsigned timeout value possible on a 32bit processor
(0xffffffff). This timeout value is used directly to schedule a hw event
in the sim future (the IRQ firing). Once the sim poll event is kicked off,
the next pending event is the core timer event which is more than 2^31
ticks in the future, and the sim aborts with:
sim-events.c:435: assertion failed - current_time == sim_events_time (sd)
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
I can't find any history for why the call to hw_tree_delete is commented
out, and the VCS history shows that this goes back to the original import
in 2009. I did find some vague reference to it from 2000 (pretty close
to the original import of code), but no actual details.
Without this call, every new instance of the sim results in all old
previously allocated resources being leaked. With some devices, this
isn't just memory, it's things like open file descriptors or mmaps.
So if there are pending issues with this, I'd rather we get the sims
sorted out rather than continuing to leak this stuff. Especially since
the "let's wait for the sims to fix themselves" hasn't actually happened
in the last 10+ years.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
I find it annoying when using --memory-mapfile that I also need to look
up and manually specify the file size to the following --memory-region
option. So make a length of 0 in the following --memory-region trigger
an auto-sizing of the map to the length of the file being mapped.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The 2nd arg to SIM_AC_OPTION_HARDWARE is described as "a space separated
list of devices that override the defaults" while the 3rd arg is "a space
separated list of extra target specific devices". But the macro doesn't
seem to treat the 2nd arg this way.
Instead, it will always add the default list of devices, and only add the
extra target specific devices if the 2nd arg is not specified. So rework
the logic slightly to handle the 2nd arg as documented.
This shouldn't affect any targets in the tree as no one passes in a non-
empty value as the 2nd arg.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
These functions either call abort() themselves, or call functions which
are already marked noreturn. Either way, they don't return, so mark them
as such so calling code can assume this. This fixes some uninitialized
warnings due to code paths that end in an abort function.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The sim_load_file func creates a buffer with arbitrary data in it (reads
it via the bfd). It then passes it on to a sim_write_fn which expects a
unsigned char buffer. Since sim_load_file itself doesn't care about the
contents, tweak the type to avoid signed mismatch warnings from gcc:
common/sim-load.c: In function ‘sim_load_file’:
common/sim-load.c:143: warning: pointer targets in passing argument 3 of ‘do_write’ differ in signedness
common/sim-load.c:143: note: expected ‘const unsigned char *’ but argument is of type ‘char *’
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
We have malloc (uninitialized buffer), zalloc (zeroed buffer), and
nzalloc (zeroed array). But we don't have a way to allocate an
uninitialized array. Add a HW_NALLOC to fill this gap.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The HW_NZALLOC macro has all caps args for some reason (unlike the other
alloc helpers), and ends up not using the "ME" argument since its copy
and paste source uses "me". Make all the args lowercase to match the
style of all the other args and make it use the correct "me".
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
There are options for listing the current device/hw tree and memory
regions, but no way to find out at run time all the current mappings.
So add a new --map-info option akin to the --memory-info option which
displays all the current mappings.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
When the sim is configured with profile support disabled, the build fails:
./../common/sim-profile.c: In function 'profile_option_handler':
./../common/sim-profile.c:337:6: warning: implicit declaration of function 'PROFILE_PC_FREQ'
./../common/sim-profile.c:337:6: error: lvalue required as left operand of assignment
./../common/sim-profile.c:351:6: warning: implicit declaration of function 'PROFILE_PC_NR_BUCKETS'
./../common/sim-profile.c:351:6: error: lvalue required as left operand of assignment
./../common/sim-profile.c:381:6: warning: implicit declaration of function 'PROFILE_PC_SHIFT'
./../common/sim-profile.c:381:6: error: lvalue required as left operand of assignment
./../common/sim-profile.c:405:8: warning: implicit declaration of function 'PROFILE_PC_START'
./../common/sim-profile.c:405:8: error: lvalue required as left operand of assignment
./../common/sim-profile.c:406:8: warning: implicit declaration of function 'PROFILE_PC_END'
./../common/sim-profile.c:406:8: error: lvalue required as left operand of assignment
./../common/sim-profile.c: In function 'profile_uninstall':
./../common/sim-profile.c:1299:7: warning: implicit declaration of function 'PROFILE_INSN_COUNT'
./../common/sim-profile.c:1299:37: warning: comparison between pointer and integer
./../common/sim-profile.c:1300:2: warning: passing argument 1 of 'zfree' makes pointer from integer without a cast
../common/sim-utils.h:30:6: note: expected 'void *' but argument is of type 'int'
make[2]: *** [sim-profile.o] Error 1
So add some stubs similar to how some of the other subsystems are
stubbed out so things build correctly.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
When building with device and hw support, the sim-core code generates a
lot of build time warnings such as:
./../common/sim-core.c: In function 'sim_core_map_attach':
./../common/sim-core.c:198:7: warning: passing argument 1 of 'device_error' from incompatible pointer type
../common/sim-core.h:347:6: note: expected 'struct device *' but argument is of type 'struct hw *'
./../common/sim-core.c:235:7: warning: passing argument 1 of 'device_error' from incompatible pointer type
../common/sim-core.h:347:6: note: expected 'struct device *' but argument is of type 'struct hw *'
In reality, these two structures get cast back and forth in the core
code already and so are "compatible". So tweak the three functions
that generate all of these warnings to include the casts automatically.
I know this isn't exactly clean, but the current device/hw ifdef
approach is full of landmines itself and I'm not entirely sure how
to unscrew it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Rather than having to bang out chunks of data one byte at a time over
the socket interface, add a write variant that accepts an arbitrarily
long buffer. This speeds things up considerably when we have many
chars to send out at once.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
gdb/
* ser-tcp.c (net_open): Check error return from socket() call by its
equality to -1 not by it being negative.
(net_close): Likewise.
gdb/gdbserver/
* gdbreplay.c (remote_open): Check error return from socket() call by
its equality to -1 not by it being negative.
* remote-utils.c (remote_open): Likewise.
sim/arm/
* communicate.c (MYread_char): Check error return from accept() call
by its equality to -1 not by it being negative.
(MYread_charwait): Likewise.
* main.c (main): Likewise for both socket() and accept() calls.
sim/common/
* dv-sockser.c (dv_sockser_init): Check error return from socket()
call by its equality to -1 not by it being negative.
(connected_p): Likewise for accept() call.
sim/cris/
* dv-rv.c (hw_rv_init_socket): Check error return from socket() call
by its equality to -1 not by it being negative.
(hw_rv_write): Likewise.
(hw_rv_handle_incoming): Likewise.
(hw_rv_poll_once): Likewise.
* rvdummy.c (setupsocket): Likewise.
(main): Likewise for accept() call as returned from setupsocket().
sim/m32c/
* main.c (setup_tcp_console): Check error return from socket() call
by its equality to -1 not by it being negative.
The current fpu code with externals enabled results in the warnings:
common/sim-fpu.c:2437: warning: missing initializer
common/sim-fpu.c:2437: warning: (near initialization for 'sim_fpu_zero.sign')
common/sim-fpu.c:2440: warning: missing initializer
common/sim-fpu.c:2440: warning: (near initialization for 'sim_fpu_qnan.sign')
So tweak the old style initializers to avoid these.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The common/ code uses sim_cpu rather than SIM_CPU to avoid inter-header
dependency issues, so follow convention to fix building some targets.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The profile code already has options and handling for accepting a file to
write the profile output like the trace code, but it doesn't actually use
it. At the moment, it simply opens the file at the start and closes it at
the end. So add two new local functions the way the trace code is doing
it and have them figure out whether to write the output to stdout or the
specified file. Then convert all existing output in the profile code to
use these helpers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
There is an architecture-info flag for listing possible arch values, but
there is on equivalent for listing possible model values. So add the
equivalent for models.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
A few ports rely on internal dv-sockser state in order to detect whether
a connection has been made (look for 'extern sockser_addr'). Rather than
continuing that tradition, extend the existing status function to return
the socket connection status.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Most the sim write functions declare their source buffer const because
they only ever read from it. The global sim_write() function does not
follow this convention though which causes some warnings when trying to
pass it const strings or buffers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The profile code has a lot of helper macros already, but none yet for the
branch profiling code. So add ones for the basic functions -- taken and
untaken branches.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The sim code has a lot of static initializer for options and devices, but
since they aren't using newer struct style, they have to specify a value
for every option otherwise gcc spits a lot of warnings about "missing
initializer". So add NULL/0 stubs for pointers/values.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The dup_arg_p function is only given const strings, and it maintains a
local table of those const strings. So constify the whole thing to fix
the GCC warnings:
common/sim-options.c: In function 'sim_parse_args':
common/sim-options.c:559: warning: passing argument 1 of 'dup_arg_p'
discards qualifiers from pointer target type
common/sim-options.c: In function 'print_help':
common/sim-options.c:675: warning: passing argument 1 of 'dup_arg_p'
discards qualifiers from pointer target type
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
I've committed the following patch as obvious. The local "prefix"
variable is only assigned const strings, and only passed to printf()
functions, so add "const" to avoid gcc warnings:
common/sim-fpu.c: In function 'sim_fpu_print_status':
common/sim-fpu.c:2508: warning: initialization discards qualifiers
from pointer target type
common/sim-fpu.c:2566: warning: assignment discards qualifiers
from pointer target type
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The local save_data() function takes a pointer to a buffer and only uses it as
the source to the memcpy() function. Since it is given const strings, GCC
likes to spit out warnings:
common/sim-trace.c: In function 'trace_prefix':
common/sim-trace.c:697: warning: passing argument 5 of 'save_data' discards
qualifiers from pointer target type
So I've committed this as obvious.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The sim-options code assigns a const string to "char *" in decoding the
current environment settings, and only uses it to pass to a printf. GCC
outputs the warnings:
common/sim-options.c: In function 'standard_option_handler':
common/sim-options.c:271: warning: assignment discards qualifiers from pointer
target type
common/sim-options.c:272: warning: assignment discards qualifiers from pointer
target type
common/sim-options.c:273: warning: assignment discards qualifiers from pointer
target type
So I've committed this as "obvious".
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The accept() function takes a socklen_t, not an int. Using an int causes:
dv-sockser.c: In function 'connected_p':
dv-sockser.c:273: warning: pointer targets in passing argument 3
of 'accept' differ in signedness
So use the same socklen_t detection code as gdb and convert the accept().
This is the normal "passing a buffer straight to printf makes GCC warn".
While we know this particular case is fine, the trend in this source tree
is to fix this anyways to avoid the warnings.
GCC issues warnings because const strings like "foo" are passed as char*.
sim-watch.c: In function 'watchpoint_type_to_str':
sim-watch.c:120: warning: return discards qualifiers from pointer target type
The trace_option_handler() function only uses cpu_nr when the
SIM_HAVE_ADDR_RANGE define is enabled. So move the decl down
to where the code exists. Otherwise GCC warns:
sim-trace.c: In function 'trace_option_handler':
sim-trace.c:236: warning: unused variable 'cpu_nr'
The device_error() takes a printf style string, so update the prototype
accordingly. The message should be const and it should use an attribute.
This fixes gcc warnings like:
sim-core.c: In function 'sim_core_map_attach':
sim-core.c:200: warning: passing argument 2 of 'device_error' discards qualifiers from pointer target type
sim-core.c:237: warning: passing argument 2 of 'device_error' discards qualifiers from pointer target type
sim-core.c: In function 'sim_core_attach':
sim-core.c:304: warning: passing argument 2 of 'device_error' discards qualifiers from pointer target type
sim-core.c:314: warning: passing argument 2 of 'device_error' discards qualifiers from pointer target type
sim-core.c:335: warning: passing argument 2 of 'device_error' discards qualifiers from pointer target type
sim-core.c:348: warning: passing argument 2 of 'device_error' discards qualifiers from pointer target type
The gdb code always passes down -E <little|big> to the sim core when using
the sim target. But the sim core only recognizes this option when the sim
supports big endian systems. So for little endian simulators, any attempt
to use the sim target fails with:
(gdb) target sim
gdbsim: invalid option -- 'E'
unable to create simulator instance
Since always respecting the option doesn't cause any problems, do just
that. If someone tries to use an invalid endian, they'll get an error
anyways.
The common code sets up an autoconf option --enable-sim-trace which adds
-DTRACE= to CPPFLAGS. This causes warnings in the building of some files
that declare a local TRACE() helper macro. So punt it from hw-ports.c
(since it isn't actually used) and convert hw-properties.c to HW_TRACE().
Including stdbool.h before hw-properties.h results in a build error due
to the hw_add_boolean_property function having an argument named "bool"
in its prototype. The source file has already be renamed to not use
this ("boolean" instead), so match the header to the source.
identifiers for file types rather than encoding internal
implementation details of cgen.sh.
(CGEN_CPU_WRITE,CGEN_CPU_SEM,CGEN_CPU_SEMSW): Ditto.
* cgen.sh: Add support for parallel makes.
Rewrite cpu/decode handling to avoid generating "extrafiles" twice.
2009-05-18 Jon Beniston <jon@beniston.com>
* MAINTAINERS: Add lm32 target.
* Makefile.in: Add lm32 dependencies.
* NEWS: Indicate lm32 is a new target.
* configure.tgt: Add lm32 targets.
* lm32-tdep.c: New file.
gdb/testsuite
2009-05-18 Jon Beniston <jon@beniston.com>
* gdb.asm/asm-source.exp: Add lm32 target.
include/gdb/
2009-05-18 Jon Beniston <jon@beniston.com>
* sim-lm32.h: New file.
sim/
2009-05-18 Jon Beniston <jon@beniston.com>
* MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
* configure.ac: Add lm32 target.
* lm32: New directory.
sim/common
2009-05-18 Jon Beniston <jon@beniston.com>
* gennltvals.sh: Add lm32 target.
* nltvals.def: Add lm32 syscall definitions.
sim/lm32/
2009-05-18 Jon Beniston <jon@beniston.com>
* Makefile.in: New file.
* arch.c: New file.
* arch.h: New file.
* config.in: New file.
* configure: New file.
* configure.ac: New file.
* cpu.c: New file.
* cpu.h: New file.
* cpuall.h: New file.
* decode.c: New file.
* decode.h: New file.
* dv-lm32cpu.c: New file.
* dv-lm32timer.c: New file.
* dv-lm32uart.c: New file.
* lm32.c: New file.
* lm32-sim.h: New file.
* mloop.in: New file.
* model.c: New file.
* sem.c: New file.
* sem-switch.c: New file.
* sim-if.c: New file.
* sim-main.c: New file.
* tconfig.in: New file.
* traps.c: New file.
* user.c: New file.
(MULHI, NEGHI, ABSHI, ADDSI, SUBSI, MULSI, NEGSI, ABSSI, ADDDI)
(SUBDI, MULDI, NEGDI, ABSDI): Cast arguments to the unsigned type
variant; UQI, UHI, USI, UDI, and cast the result to the signed
type, QI, HI, SI, DI.
(MULHI, NEGHI, ABSHI, ADDSI, SUBSI, MULSI, NEGSI, ABSSI, ADDDI)
(SUBDI, MULDI, NEGDI, ABSDI): Cast arguments to the unsigned type
variant; UQI, UHI, USI, UDI, and cast the result to the signed
type, QI, HI, SI, DI.
command interpreter to use to run the input file. This is
necessary because otherwise SHELL is taken from the user's
environment, and not from the makefile that invoked this script
and the user might not be running an sh-like shell.
* cris/Makefile.in: Pass -shell parameter to genmloop.sh.
* fr30/Makefile.in: Likewise.
* frv/Makefile.in: Likewise.
* i960/Makefile.in: Likewise.
* iq2000/Makefile.in: Likewise.
* m32r/Makefile.in: Likewise.
* frv/mloop.in: Add missing start of line comment marker.
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* cris/configure: Regenerate.
sim/common:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* aclocal.m4: Include ../../config/acx.m4.
* common.m4: Use ACX_PKGVERSION and ACX_BUGURL.
* configure, config.in: Regenerate.
* Make-common.in (LIB_OBJS): Add version.o.
(version.c, version.o): New rules.
* run.c: Include version.h.
(usage): Add help parameter. Print output either to stdout or
stderr depending on that parameter.
(print_version): New.
(main): Check for --help and --version.
* run-sim.h (sim_target_display_usage): Add help parameter.
* version.h: New.
sim/arm:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
* wrapper.c (sim_target_display_usage): Add help parameter.
sim/cr16:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/d10v:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/erc32:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/frv:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/h8300:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/iq2000:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m32c:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m32r:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m68hc11:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mcore:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mips:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mn10300:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/ppc:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure.ac: Use ACX_PKGVERSION and ACX_BUGURL.
* configure, config.in: Regenerated.
* Makefile.in (LIB_OBJ): Add version.o.
(version.c, version.o): New rules.
* psim.c (psim_usage): Add help parameter. Print the bug URL.
Exit with code 0 for help.
(psim_options): Update calls to psim_usage. Handle --help and
--version.
* psim.h (psim_usage): Update prototype.
* main.c (main): Update psim_usage call.
sim/sh:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/sh64:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/v850:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
(parse_size): Handle a suffix on the size value.
* sim-options.c (standard_options): Mention that the mem-size switch accepts suffixes.
(standard_option_handler): Handle a suffix on the size value.
sim_resume. Expect target signal numbers from sim_stop_reason.
* wrapper.c (gdb/signals.h): Include it.
(SIGTRAP): Don't define.
(SIGBUS): Likewise.
(sim_stop_reason): Use TARGET_SIGNAL_* instead of SIG*.
* sim-reason.c (sim_stop_reason): Use
sim_signal_to_target, not sim_signal_to_host.
* sim-signal.c (sim_signal_to_host): Fix typo.
(sim_signal_to_target): New function.
* interp.c (gdb/signals.h): Include it.
(sim_stop_reason): Use TARGET_SIGNAL_*.
* interf.c: (gdb/signals.h): Include it.
(sim_stop_reason): Use TARGET_SIGNAL_*.
* sim_calls.c (gdb/signals.h): Include it.
(sim_stop_reason): Use TARGET_SIGNAL_*.
* psim.c (cntrl_c_simulation): Use TARGET_SIGNAL_*.
* common/callback.c (PIPE_BUF): Provide default refinition.
(os_lstat): Use stat if lstat is not available on the host.
(os_ftruncate): Return EINVAL if not available on the host.
(os_truncate): Ditto.
* common/configure.ac: Check for lstat, truncate and ftruncate.
* common/configure: Regenerate.
* common/config.in: Regenerate.
2005-02-28 Jim Blandy <jimb@redhat.com>
* aclocal.m4 (SIM_AC_OPTION_WARNINGS): Don't include
-Wuninitialized in the default list of build warnings if CFLAGS is
set, and doesn't include -O. (Using -Wuninitialized without
optimization produces a warning, which interferes with compilation
with -Werror.)
sim/ChangeLog:
2005-02-28 Jim Blandy <jimb@redhat.com>
* d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
Regenerated, after change to common/aclocal.m4.
2005-02-09 Jim Blandy <jimb@redhat.com>
* cgen-sim.scm (load-files): Don't load fixup.scm. (See
corresponding change in the sim/common directory.)
sim/common/ChangeLog:
2005-02-09 Jim Blandy <jimb@redhat.com>
* Make-common.in (CGEN): Load guile.scm, and include a trailing
'-s' argument.
(CGEN_FLAGS_TO_PASS): Include single quotes around the reference
to $(CGEN), to ensure that the command substitution happens where
the variable is referenced in the submake, not when the submake's
arguments are expanded.
(cgen.sh): Be prepared for the 'cgen' argument to contain spaces.
(arch, cpu, decode, cpu-decode, defs, desc): Place the name of the
application Scheme script directly after ${cgen}; don't precede it
with a -s.
* callback.c [HAVE_LIMITS_H]: Include limits.h.
Include libiberty.h.
(os_close, os_read, os_write, os_fstat, os_ftruncate): Support fd
being either end of a pipe.
(os_pipe, os_pipe_empty, os_pipe_nonempty): New functions.
(os_shutdown): Clear pipe state.
(default_callback): Initialize new members.
(cb_store_target_endian): Renamed from store, new first parameter
host_callback *cb, drop last parameter big_p. Take endianness
from cb.
(cb_host_to_target_stat): Change to use cb_store_target_endian.
Remove variable big_p.
* nrun.c (main): Initialize default_callback.target_endian.
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: mn10300/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: d10v/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: erc32/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: frv/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: h8300/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: m32r/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: mcore/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: mips/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: v850/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: common/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* common.m4: New file, based on of aclocal.m4.
Index: arm/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
* sim-options.c (STANDARD_OPTIONS): New member OPTION_SYSROOT.
(standard_options): Support --sysroot=<path>.
(standard_option_handler): Handle OPTION_SYSROOT.
* syscall.c (simulator_sysroot): Define, initialized empty.
(get_path): Prepend simulator_sysroot to absolute file path.
[HAVE_STRING_H]: Include string.h.
[!HAVE_STRING_H && HAVE_STRINGS_H]: Include strings.h.
* nrun.c [HAVE_UNISTD_H]: Include unistd.h.
(main): If simulator_sysroot is not empty, chdir there.
* sim-config.h (simulator_sysroot): Declare.
st_dev, st_ino, st_mode, st_nlink, st_uid, st_gid, st_rdev,
st_size, st_blksize, st_blocks, st_atime, st_mtime and st_ctime.
* aclocal.m4 (SIM_CHECK_MEMBER, SIM_CHECK_MEMBERS_1)
(SIM_CHECK_MEMBERS): New macros.
* callback.c (cb_host_to_target_stat): Use temporary macro ST_x
for struct stat member test and write. Add ST_x calls for each
struct stat member tested in configure.in. Wrap each ST_x call in
#ifdef of configure macro for that member.
* configure, config.in: Regenerate.
add sub-dependencies for other sim files that they include.
(sim_main_headers): Use sim-*_h rules.
(sim-load.o): Depend on sim-basics_h, not sim_main_headers.
2004-07-26 Andrew Cagney <cagney@gnu.org>
Problem from Olaf Hering <olh@suse.de>.
* Makefile.in (install-man, installdirs): Add DESTDIR prefix.
Index: ppc/ChangeLog
2004-07-26 Andrew Cagney <cagney@gnu.org>
Problem from Olaf Hering <olh@suse.de>.
* Makefile.in (install, installdirs): Add DESTDIR.
Joel Brobecker