Add AC_FUNC_MMAP to configure.ac so that HAVE_MMAP will be checked in
objdump.c and mmap is used if available.
* configure.ac (AC_FUNC_MMAP): New.
* config.in: Regenerated.
* configure: Likewise.
On readelf examining a static executable built with current glibc,
we get a silly warning.
Section Headers:
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[ 0] NULL 0000000000000000 000000 000000 00 0 0 0
[ 1] .note.ABI-tag NOTE 0000000000400190 000190 000020 00 A 0 0 4
[ 2] .note.gnu.build-id NOTE 00000000004001b0 0001b0 000024 00 A 0 0 4
readelf: Warning: [ 3]: Link field (0) should index a symtab section.
[ 3] .rela.plt RELA 00000000004001d8 0001d8 000228 18 AI 0 20 8
This .rela.plt section contains only IRELATIVE relocations (which have
symbol index zero), so it isn't appropriate to warn. A zero sh_link
section is deliberately chosen for such a section (see PR10337 and
PR23850).
So this patch disables the SHT_REL* sh_link warning. I've also
removed the .rel.dyn/.rela.dyn section name test to disable the
sh_info warning for SHT_REL* sections. While relocation sections in
an executable need not specify the section they relocate (the
relocation sh_offset field is an address, not a section offset), that
isn't true in a relocatable file where sh_offset is relative to a
section. If .rela.dyn happens to exist in an ET_REL object it must
specify a valid section.
* readelf.c (process_section_headers): Don't warn on a zero
sh_info or sh_link for any reloc section in an executable or
shared library. Do warn for .rel.dyn/.rela.dyn in ET_REL.
run_dump_test proposes an ld action but when trying to make use of it in
a gas test it gave me some Tcl error. It turns out that it references
the check_shared_lib_support procedure and ld_elf_shared_opt variable
both only available in ld-lib.exp. I've thus moved the procedure in
binutils-common.exp and defined the variable needed in the various
default.exp of testsuite that seem to be using run_dump_test.
Since check_shared_lib_support itself references the ld variable not
defined in binutils-common I've defined it from LD in run_dump_test and
fixed LD and LDFLAGS to be defined as expected by run_dump_test in the
various default.exp of testsuite using run_dump_test.
2018-11-01 Thomas Preud'homme <thomas.preudhomme@linaro.org>
binutils/
* testsuite/config/default.exp: Define LD, LDFLAGS and
ld_elf_shared_opt.
* testsuite/lib/binutils-common.exp (check_shared_lib_support): Moved
from ld-lib.exp.
(run_dump_test): Set ld to $LD.
gas/
* testsuite/config/default.exp: Define LD, LDFLAGS and
ld_elf_shared_opt.
ld/
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Moved to
binutils-common.exp.
Third party tools produce 32 bit relocs at index 6 with strange properties.
This change moves the existing 32 bit reloc (R_S12Z_EXT32) to index 7
and introduces a new one (R_S12Z_CW32) at index 6 to try to support code
generated by these tools.
* bfd/elf32-s12z.c (elf_s12z_howto_table) [R_S12Z_CW32]: New member.
* binutils/readelf.c (is_32bit_abs_reloc): Reloc type 7 is also 32 bit.
* include/elf/s12z.h (elf_s12z_reloc_tpe) [RELOC_NUMBER (R_S12Z_CW32)]: New enum.
This patch performs a run-time test that a shared libbfd.so has been
compiled with the same size bfd_vma as that of apps using the library.
On a 32-bit host it is easily possible to have one libbfd.so compiled
to support 64-bit targets (or configured with --enable-64-bit-bfd)
while another only supports 32-bit targets. The two libraries will
have differently sized bfd_vma types, and if the wrong one is loaded
all sorts of weird behaviour might be seen.
bfd/
PR 23534
* init.c (BFD_INIT_MAGIC): Define.
(bfd_init): Return BFD_INIT_MAGIC.
bfd-in2.h: Regenerate.
binutils/
PR 23534
* addr2line.c (main): Exit with fatal error if bfd_init
returns an unexpected value.
* ar.c (main): Likewise.
* dlltool.c (identify_dll_for_implib): Likewise.
* nm.c (main): Likewise.
* objcopy.c (main): Likewise.
* objdump.c (main): Likewise.
* size.c (main): Likewise.
* strings.c (main): Likewise.
* windmc.c (main): Likewise.
* windres.c (main): Likewise.
gas/
PR 23534
* as.c (main): Exit with fatal error if bfd_init returns an
unexpected value.
ld/
PR 23534
* ldmain.c (main): Exit with fatal error if bfd_init returns
an unexpected value.
This is the result of an email thread starting here:
https://sourceware.org/ml/binutils/2018-09/msg00031.html
The main point of the thread is this observation:
* Supposing we had an object file with two globals, SomeGlobal and
SomeOtherGlobal, if one were to do "--globalize-symbol SomeGlobal
--keep-global-symbol SomeOtherGlobal", you might expect that both
SomeGlobal and SomeOtherGlobal are global in the output file... but it
isn't. Because --keep-global-symbol is set and doesn't include
SomeGlobal, SomeGlobal will be demoted to a local symbol. And because
the check to see if we should apply the --globalize-symbol flag checks
"flags" (the original flag set), and not "sym->flags", it decides not
to do anything, so SomeGlobal remains a local symbol. Although this is
a weird edge case, should this be changed so that --keep-global-symbol
implicitly keeps anything also specified via --globalize-symbol? (The
code seems technically correct with respect to the documentation, but
IMO the behavior is counter-intuitive).
binutils* objcopy.c (copy_main): Issue a fata error if the
--keep-global-symbol(s) and the --globalize-symbol(s) options are
used together.
* doc/binutils.texi: Document that the two options are
incompatible.
* testsuite/binutils-all/copy-5.d: New test.
* testsuite/binutils-all/objcopy.exp: Run the new test.
.PARISC.unwind has 32-bit addresses in both 32-bit ELF and 64-bit ELF.
Well, strictly speaking, the 32-bit "start" and "end" fields are
segment relative offsets. (The 64-bit ABI says so, while the 32-bit
ABI says they are addresses but it appears they are segment relative
offsets in practice. Likely the 32-bit ABI lacks an update.)
* readelf.c (hppa_process_unwind): Don't use eh_addr_size to
calculate number of entries.
(slurp_hppa_unwind_table): Don't use eh_addr_size here either.
echo "__thread char *p;" | gcc -c -g -xc - -o thread.o
With current powerpc64le-linux-gcc has this reloc in .debug_info
0000000000000025 0000000d0000004e R_PPC64_DTPREL64 0000000000000000 p + 8000
That stops me looking at .debug_info.
~/build/gas-virgin/powerpc64le-linux/binutils/readelf -wi thread.o
readelf: Warning: unable to apply unsupported reloc type 78 to section .debug_info
Older readelf continued on after the warning, dumping .debug_info.
* readelf.c (apply_relocations): Don't return FALSE for warnings.
binutils/
* dwarf.c (display_debug_lines_decoded): Add display of is_stmt.
* testsuite/binutils-all/dw5.W: Deal with the consequences.
* testsuite/binutils-all/objdump.WL: Deal with the consequences.
We have not only removed all unsupported and obsolete code, but also supported lost of new features,
including better link-time relaxations and TLS implementations. Besides, the files generated by the
newly assembler and linker usually get higher performance and more optimized code size.
ld * emultempl/nds32elf.em (hyper_relax): New variable.
(nds32_elf_create_output_section_statements):
the parameters of bfd_elf32_nds32_set_target_option
(PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --mhyper-relax.
* emultempl/nds32elf.em (nds32_elf_after_open): Updated.
* emultempl/nds32elf.em (tls_desc_trampoline): New variable.
* (nds32_elf_create_output_section_statements): Updated.
* (nds32_elf_after_parse): Disable relaxations when PIC is enable.
* (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --m[no-]tlsdesc-trampoline.
include * elf/nds32.h: Remove the unused target features.
* dis-asm.h (disassemble_init_nds32): Declared.
* elf/nds32.h (E_NDS32_NULL): Removed.
(E_NDS32_HAS_DSP_INST, E_NDS32_HAS_ZOL): New.
* opcode/nds32.h: Ident.
(N32_SUB6, INSN_LW): New macros.
(enum n32_opcodes): Updated.
* elf/nds32.h: Doc fixes.
* elf/nds32.h: Add R_NDS32_LSI.
* elf/nds32.h: Add new relocations for TLS.
gas * config/tc-nds32.c: Remove the unused target features.
(nds32_relax_relocs, md_pseudo_table, nds32_elf_record_fixup_exp,
nds32_set_elf_flags_by_insn, nds32_insert_relax_entry,
nds32_apply_fix): Likewise.
(nds32_no_ex9_begin): Removed.
* config/tc-nds32.c (add_mapping_symbol_for_align,
make_mapping_symbol, add_mapping_symbol): New functions.
* config/tc-nds32.h (enum mstate): New.
(nds32_segment_info_type): Likewise.
* configure.ac (--enable-dsp-ext, --enable-zol-ext): New options.
* config.in: Regenerated.
* configure: Regenerated.
* config/tc-nds32.c (nds32_dx_regs):
Set the value according to the configuration.
(nds32_perf_ext, nds32_perf_ext2, nds32_string_ext, nds32_audio_ext):
Likewise.
(nds32_dsp_ext): New variable. Set the value according to the
configuration.
(nds32_zol_ext): Likewise.
(asm_desc, nds32_pseudo_opcode_table): Make them static.
(nds32_set_elf_flags_by_insn): Updated.
(nds32_check_insn_available): Updated.
(nds32_str_tolower): New function.
* config/tc-nds32.c (relax_table): Updated.
(md_begin): Updated.
(md_assemble): Use XNEW macro to allocate space for `insn.info',
and then remember to free it.
(md_section_align): Cast (-1) to ValueT.
(nds32_get_align): Cast (~0U) to addressT.
(nds32_relax_branch_instructions): Updated.
(md_convert_frag): Add new local variable `final_r_type'.
(invalid_prev_frag): Add new bfd_boolean parameter `relax'.
All callers changed.
* config/tc-nds32.c (struct nds32_relocs_pattern): Add `insn' field.
(struct nds32_hint_map): Add `option_list' field.
(struct suffix_name, suffix_table): Remove the unused `pic' field.
(do_pseudo_b, do_pseudo_bal): Remove the suffix checking.
(do_pseudo_la_internal, do_pseudo_pushpopm): Indent.
(relax_hint_bias, relax_hint_id_current): New static variables.
(reset_bias, relax_hint_begin): New variables.
(nds_itoa): New function.
(CLEAN_REG, GET_OPCODE): New macros.
(struct relax_hint_id): New.
(nds32_relax_hint): For .relax_hint directive, we can use `begin'
and `end' to mark the relax pattern without giving exactly id number.
(nds32_elf_append_relax_relocs): Handle the case that the .relax_hint
directives are attached to pseudo instruction.
(nds32_elf_save_pseudo_pattern): Change the second parameter from
instruction's opcode to byte code.
(nds32_elf_build_relax_relation): Add new bfd_boolean parameter
`pseudo_hint'.
(nds32_lookup_pseudo_opcode): Fix the overflow issue.
(enum nds32_insn_type): Add N32_RELAX_ALU1 and N32_RELAX_16BIT.
(nds32_elf_record_fixup_exp, relax_ls_table, hint_map,
nds32_find_reloc_table, nds32_match_hint_insn, nds32_parse_name):
Updated.
* config/tc-nds32.h (MAX_RELAX_NUM): Extend it to 6.
(enum nds32_relax_hint_type): Merge NDS32_RELAX_HINT_LA and
NDS32_RELAX_HINT_LS into NDS32_RELAX_HINT_LALS. Add
NDS32_RELAX_HINT_LA_PLT, NDS32_RELAX_HINT_LA_GOT and
NDS32_RELAX_HINT_LA_GOTOFF.
* config/tc-nds32.h (relax_ls_table): Add floating load/store
to gp relax pattern.
(hint_map, nds32_find_reloc_table): Likewise.
* configure.ac: Define NDS32_LINUX_TOOLCHAIN.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-nds32.h (enum nds32_ramp): Updated.
(enum nds32_relax_hint_type): Likewise.
* config/tc-nds32.c: Include "errno.h" and "limits.h".
(relax_ls_table): Add TLS relax patterns.
(nds32_elf_append_relax_relocs): Attach BFD_RELOC_NDS32_GROUP on
each instructions of TLS patterns.
(nds32_elf_record_fixup_exp): Updated.
(nds32_apply_fix): Likewise.
(suffix_table): Add TLSDESC suffix.
binutils* testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number
from 215 to 255 for NDS32.
bfd * elf32-nds32.c (nds32_elf_relax_loadstore):
Remove the unused target features.
(bfd_elf32_nds32_set_target_option): Remove the unused parameters.
(nds32_elf_relax_piclo12, nds32_elf_relax_letlslo12,
nds32_elf_relax_letlsadd, nds32_elf_relax_letlsls,
nds32_elf_relax_pltgot_suff, nds32_elf_relax_got_suff
nds32_elf_relax_gotoff_suff, calculate_plt_memory_address,
calculate_plt_offset, calculate_got_memory_address,
nds32_elf_check_dup_relocs): Removed.
All callers changed.
* elf32-nds32.h: Remove the unused macros and defines.
(elf_nds32_link_hash_table): Remove the unused variable.
(bfd_elf32_nds32_set_target_option): Update prototype.
(nds32_elf_ex9_init): Removed.
* elf32-nds32.c (nds32_convert_32_to_16): Updated.
* elf32-nds32.c (HOWTO2, HOWTO3): Define new HOWTO macros
to initialize array nds32_elf_howto_table in any order
without lots of EMPTY_HOWTO.
(nds32_reloc_map): Updated.
* reloc.c: Add BFD_RELOC_NDS32_LSI.
* bfd-in2.h: Regenerated.
* bfd/libbfd.h: Regenerated.
* elf32-nds32.c (nds32_elf_relax_howto_table): Add R_NDS32_LSI.
(nds32_reloc_map): Likewise.
(nds32_elf_relax_flsi): New function.
(nds32_elf_relax_section): Support floating load/store relaxation.
* elf32-nds32.c (NDS32_GUARD_SEC_P, elf32_nds32_local_gp_offset):
New macro.
(struct elf_nds32_link_hash_entry): New `offset_to_gp' field.
(struct elf_nds32_obj_tdata): New `offset_to_gp' and `hdr_size' fields.
(elf32_nds32_allocate_local_sym_info, nds32_elf_relax_guard,
nds32_elf_is_target_special_symbol, nds32_elf_maybe_function_sym):
New functions.
(nds32_info_to_howto_rel): Add BFD_ASSERT.
(bfd_elf32_bfd_reloc_type_table_lookup, nds32_elf_link_hash_newfunc,
nds32_elf_link_hash_table_create, nds32_elf_relocate_section,
nds32_elf_relax_loadstore, nds32_elf_relax_lo12, nds32_relax_adjust_label,
bfd_elf32_nds32_set_target_option, nds32_fag_mark_relax): Updated.
(nds32_elf_final_sda_base): Improve it to find the better gp value.
(insert_nds32_elf_blank): Must consider `len' when inserting blanks.
* elf32-nds32.h (bfd_elf32_nds32_set_target_option): Update prototype.
(struct elf_nds32_link_hash_table): Add new variable `hyper_relax'.
* elf32-nds32.c (elf32_nds32_allocate_dynrelocs): New function.
(create_got_section): Likewise.
(allocate_dynrelocs, nds32_elf_size_dynamic_sections,
nds32_elf_relocate_section, nds32_elf_finish_dynamic_symbol): Updated.
(nds32_elf_check_relocs): Fix the issue that the shared library may
has TEXTREL entry in the dynamic section.
(nds32_elf_create_dynamic_sections): Enable to call readonly_dynrelocs
since the TEXTREL issue is fixed in the nds32_elf_check_relocs.
(nds32_elf_finish_dynamic_sections): Update and add DT_RELASZ
dynamic entry.
(calculate_offset): Remove the unused parameter `pic_ext_target' and
related codes.
All callers changed.
(elf_backend_dtrel_excludes_plt): Disable it temporarily since it
will cause some errors for our test cases.
* elf32-nds32.c (nds32_elf_merge_private_bfd_data): Allow to link the
generic object.
* reloc.c: Add TLS relocations.
* libbfd.h: Regenerated.
* bfd-in2.h: Regenerated.
* elf32-nds32.h (struct section_id_list_t): New.
(elf32_nds32_lookup_section_id, elf32_nds32_check_relax_group,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model):
New prototypes.
(elf32_nds32_compute_jump_table_size, elf32_nds32_local_tlsdesc_gotent):
New macro.
(nds32_insertion_sort, bfd_elf32_nds32_set_target_option,
elf_nds32_link_hash_table): Updated.
* elf32-nds32.c (enum elf_nds32_tls_type): New.
(struct elf32_nds32_relax_group_t, struct relax_group_list_t): New.
(elf32_nds32_add_dynreloc, patch_tls_desc_to_ie, get_tls_type,
fls, ones32, list_insert, list_insert_sibling, dump_chain,
elf32_nds32_check_relax_group, elf32_nds32_lookup_section_id,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New functions.
(elf_nds32_obj_tdata): Add new fields.
(elf32_nds32_relax_group_ptr, nds32_elf_local_tlsdesc_gotent): New macros.
(nds32_elf_howto_table): Add TLS relocations.
(nds32_reloc_map): Likewise.
(nds32_elf_copy_indirect_symbol, nds32_elf_size_dynamic_sections,
nds32_elf_finish_dynamic_symbol, elf32_nds32_allocate_local_sym_info,
nds32_elf_relocate_section, bfd_elf32_nds32_set_target_option,
nds32_elf_check_relocs, allocate_dynrelocs): Updated.
(nds32_elf_relax_section): Call nds32_elf_unify_tls_model.
(dtpoff_base): Rename it to `gottpof' and then update it.
opcodes * nds32-asm.c (operand_fields): Remove the unused fields.
(nds32_opcodes): Remove the unused instructions.
* nds32-dis.c (nds32_ex9_info): Removed.
(nds32_parse_opcode): Updated.
(print_insn_nds32): Likewise.
* nds32-asm.c (config.h, stdlib.h, string.h): New includes.
(LEX_SET_FIELD, LEX_GET_FIELD): Update defines.
(nds32_asm_init, build_operand_hash_table, build_keyword_hash_table,
build_opcode_hash_table): New functions.
(nds32_keyword_table, nds32_keyword_count_table, nds32_field_table,
nds32_opcode_table): New.
(hw_ktabs): Declare it to a pointer rather than an array.
(build_hash_table): Removed.
* nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT,
SYN_ROPT and upadte HW_GPR and HW_INT.
* nds32-dis.c (keywords): Remove const.
(match_field): New function.
(nds32_parse_opcode): Updated.
* disassemble.c (disassemble_init_for_target):
Add disassemble_init_nds32.
* nds32-dis.c (eum map_type): New.
(nds32_private_data): Likewise.
(get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid,
nds32_add_opcode_hash_table, disassemble_init_nds32): New functions.
(print_insn_nds32): Updated.
* nds32-asm.c (parse_aext_reg): Add new parameter.
(parse_re, parse_re2, parse_aext_reg): Only reduced registers
are allowed to use.
All callers changed.
* nds32-asm.c (keyword_usr, keyword_sr): Updated.
(operand_fields): Add new fields.
(nds32_opcodes): Add new instructions.
(keyword_aridxi_mx): New keyword.
* nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX
and NASM_ATTR_ZOL.
(ALU2_1, ALU2_2, ALU2_3): New macros.
* nds32-dis.c (nds32_filter_unknown_insn): Updated.
add_specific_symbols allocates a buffer to hold symbols. It should be
freed only if it is no longer in use.
PR binutils/23633
* objcopy.c (strip_specific_buffer): New.
(strip_unneeded_buffer): Likewise.
(keep_specific_buffer): Likewise.
(localize_specific_buffer): Likewise.
(globalize_specific_buffer): Likewise.
(keepglobal_specific_buffer): Likewise.
(weaken_specific_buffer): Likewise.
(add_specific_symbols): Add an argument to return pointer to
allocated buffer.
(copy_main): Update add_specific_symbols to update pointers to
allocated buffer. Free pointers to allocated buffer before
return.
* objcopy.c (handle_remove_section_option): Don't require a dot
after .rela and .rel to handle a possible relocation section.
* testsuite/binutils-all/remove-relocs-07.s,
* testsuite/binutils-all/remove-relocs-07.d,
* testsuite/binutils-all/remove-relocs-08.d: New tests.
* testsuite/binutils-all/remove-relocs-01.d,
* testsuite/binutils-all/remove-relocs-04.d,
* testsuite/binutils-all/remove-relocs-05.d,
* testsuite/binutils-all/remove-relocs-06.d: Exclude mips64-openbsd.
binutils* testsuite/binutils-all/compress.exp: Rename second "objcopy
zlib-gnu compress debug sections 3" test to "objcopy zlib-gabi
compress debug sections 3" and use gabi object files instead
of gnu object files.
* testsuite/binutils-all/objcopy.exp: Add suffix to the names
of the "ELF group" tests.
* testsuite/binutils-all/readelf.exp (proc readelf_find_size):
Add an iteration parameter and include it in the name of the
test. Update callers to include an iteration count.
gas * testuite/gas/elf/group0a.d: Add extra details to the test
name.
* testuite/gas/elf/group0b.d: Likewise.
* testuite/gas/elf/group1a.d: Likewise.
* testuite/gas/elf/group1b.d: Likewise.
* testuite/gas/elf/group0b.d: Likewise.
* testuite/gas/elf/section9.d: Likewise.
* testuite/gas/i386/ilp32/lns/lns-common-1.d: Likewise.
* testuite/gas/i386/ilp32/lns/lns-duplicate-1.d: Likewise.
ld * testuite/ld/ld-elf/audit.exp: Differentiate the names of the
two "Run with shared with --audit" tests.
* testuite/ld/ld-elf/compress.exp: Differentiate the zlib
compressed debug output test names.
* testuite/ld/ld-i386/tlspie1.d: Add extra details to the test
name.
* testuite/ld/ld-i386/tlspie2.d: Likewise.
* testuite/ld/ld-size/size.exp: Add missing escapes to the end
of lines in the size-3e test.
* testuite/ld/ld-unique/unique.exp: Differentiate the names of
the two "Checking unique PIC object" tests.
* testuite/ld/ld-x86-64/tlspie1.d: Add extra details to the test
name.
This merges the three versions of run_dump_test. Improved warning
handling versus the old gas version shows up a number of tests that
need their disassembly updating:
arm-linuxeabi +FAIL: ARM v1 instructions
arm-linuxeabi +FAIL: Accepted v8-a with ARMv8.1 AdvSIMD.
arm-linuxeabi +FAIL: bl local instructions for v4t.
arm-linuxeabi +FAIL: UDF
and some that now fail due to detecting assembly warnings:
h8300-elf +FAIL: binutils-all/strip-13
h8300-elf +FAIL: binutils-all/strip-14
h8300-elf +FAIL: binutils-all/strip-15
I've generally kept the union of all run_dump_test features, except
that the ld target aliases "cfi" and "shared" have disappeared, as has
the binutils substitution of $srcdir as $scrdir/$subdir.
binutils/
* testsuite/binutils-all/add-symbol.d: Add "section_subst: no".
* testsuite/binutils-all/elfedit.exp: Don't set tempfile or copyfile.
* testsuite/binutils-all/symbols-1.d,
* testsuite/binutils-all/symbols-2.d,
* testsuite/binutils-all/symbols-3.d,
* testsuite/binutils-all/symbols-4.d: Quote '*' and '!'.
* testsuite/binutils-all/add-empty-section.d,
* testsuite/binutils-all/add-section.d,
* testsuite/binutils-all/elfedit.exp,
* testsuite/binutils-all/note-1.d,
* testsuite/binutils-all/pr23633.d: Add $subdir after $srcdir.
* testsuite/config/default.exp (AS, ASFLAGS): Define.
* testsuite/config/hppa.sed: Handle all common symbols.
* testsuite/lib/binutils-common.exp (run_dump_test): New proc,
merged from three other versions.
(slurp_options, file_contents, set_file_contents): Likewise.
(big_or_little_endian, get_standard_section_names): Likewise.
* testsuite/lib/utils-lib.exp (run_dump_test): Delete.
(slurp_options, proc file_contents): Delete.
(get_standard_section_names): Delete.
gas/
* testsuite/config/default.exp: Make tmpdir.
* testsuite/lib/gas-defs.exp (run_dump_test): Delete.
(get_standard_section_names, slurp_options): Delete.
ld/
* testsuite/ld-d10v/reloc-007.d,
* testsuite/ld-d10v/reloc-008.d,
* testsuite/ld-d10v/reloc-015.d,
* testsuite/ld-d10v/reloc-016.d: Remove "error:".
* testsuite/ld-elf/eh-frame-hdr.d,
* testsuite/ld-elf/eh5.d,
* testsuite/ld-gc/personality.d: Replace "cfi" and "shared" in
target list with appropriate proc.
* testsuite/ld-elf/frame.exp: Use check_shared_lib_support rather
than "istarget shared".
* testsuite/lib/ld-lib.exp (proc big_or_little_endian): Delete.
(run_dump_test, slurp_options, file_contents): Delete.
(set_file_contents, istarget): Delete.
We have three copies of run_dump_test in the testsuite. This is a first
step towards consolidating them.
A few tests use objcopy to convert to verilog or srec output, then
check that output is as expected. Those tests can just as easily use
objdump, keeping the set of dump programs (addr2line, nm, objdump,
readelf, size) separate from utilities under test. That in turn makes
auto-detecting the dump program possible in more places.
binutils/
* testsuite/binutils-all/group-7a.d,
* testsuite/binutils-all/group-7b.d,
* testsuite/binutils-all/group-7c.d,
* testsuite/binutils-all/symbols-1.d,
* testsuite/binutils-all/symbols-2.d,
* testsuite/binutils-all/symbols-3.d,
* testsuite/binutils-all/symbols-4.d: Remove DUMPPROG.
gas/
* testsuite/gas/mri/char.d: Don't objcopy to srec, objdump instead.
* testsuite/gas/mri/float.d: Likewise.
* testsuite/lib/gas-defs.exp (run_dump_test): Remove support
for objcopy as a dump tool.
ld/
* testsuite/ld-elf/interleave-0.d,
* testsuite/ld-elf/interleave-4.d: Don't objcopy to srec,
objdump instead.
* testsuite/ld-gc/all-debug-sections.d,
* testsuite/ld-scripts/provide-4.d,
* testsuite/ld-scripts/provide-5.d,
* testsuite/ld-scripts/provide-6.d,
* testsuite/ld-scripts/provide-7.d,
* testsuite/ld-scripts/provide-8.d,
* testsuite/ld-scripts/segment-start.d: Remove PROG, specify
nm instead.
* testsuite/lib/ld-lib.exp (run_dump_test): Remove support
for objcopy as a dump tool.
BFD handles ELF relocation sections in an executable differently to
relocation sections in a relocatable object. For a relocatable
object, BFD carries the relocations as data associated with the
section to which they apply; The relocation section doesn't appear as
a separate section. For an executable, dynamic relocation sections do
appear as separate sections. This means that objcopy needs to use
different strategies when dealing with relocations.
When --remove-relocations was added to objcopy with commit
d3e5f6c8f1, objcopy lost the ability to remove dynamic relocation
sections such as .rela.plt from executables using the option
"--remove-section=.rela.plt". This patch reinstates that
functionality.
I thought it best to keep --remove-relocations as is, rather than
extending to handle dynamic relocations as per the patch in the PR,
because executables linked with --emit-relocs may have both dynamic
and non-dynamic relocations. In that case --remove-relocataions=* is
useful to remove all the non-dynamic relocations.
PR binutils/23611
* objcopy.c (handle_remove_section_option): Consider .rela and
.rel sections for stripping directly as well as attached to the
associated section they relocate.
* doc/binutils.texi (remove-relocations): Specify that this
option removes non-dynamic relocation sections.
* testsuite/binutils-all/objcopy.exp
(objcopy_remove_relocations_from_executable): New test.
Since x86 assembler may generate .note.gnu.property section, adjust
binutils tests to handle it.
* testsuite/binutils-all/readelf.s-64: Adjusted for
.note.gnu.property section.
* testsuite/binutils-all/strip-3.d: Also strip
.note.gnu.property section.
Since SHT_FINI_ARRAY and SHT_PREINIT_ARRAY sections are relocatable,
this patch fixes readelf and adds a testcase.
binutils/
* readelf.c (process_section_headers): Treat SHT_FINI_ARRAY and
SHT_PREINIT_ARRAY as relocatable sections.
gas/
* testsuite/gas/elf/elf.exp: Run section14.
* testsuite/gas/elf/section14.d: New file.
* testsuite/gas/elf/section14.s: Likewise.
Since only the GNU_PROPERTY_X86_UINT32_VALID bit may be set in data-only
relocatable objects which don't contain any instructions, linker
shouldn't mask out the GNU_PROPERTY_X86_UINT32_VALID bit when merging
GNU_PROPERTY_X86_XXX bits. Otherwise, linker output doesn't contain
GNU_PROPERTY_X86_XXX property with any data-only relocatable inputs.
This patch keeps the GNU_PROPERTY_X86_UINT32_VALID bit and updates
readelf to print "<None>" if GNU_PROPERTY_X86_XXX property only has
the GNU_PROPERTY_X86_UINT32_VALID bit.
bfd/
* elfxx-x86.c (_bfd_x86_elf_parse_gnu_properties): Don't mask
out the GNU_PROPERTY_X86_UINT32_VALID bit.
binutils/
* readelf.c (decode_x86_isa): Print <None> if bitmask only
contains the GNU_PROPERTY_X86_UINT32_VALID bit.
(decode_x86_feature_1): Likewise.
(decode_x86_feature_2): Likewise.
(print_gnu_property_note): Don't mask out the
GNU_PROPERTY_X86_UINT32_VALID bit.
* testsuite/binutils-all/i386/pr21231b.d: Updated.
* testsuite/binutils-all/x86-64/pr21231b.d: Likewise.
gas/
* testsuite/gas/i386/i386.exp: Run property-1 and
x86-64-property-1.
* testsuite/gas/i386/property-1.d: New file.
* testsuite/gas/i386/property-1.s: Likewise.
* testsuite/gas/i386/x86-64-property-1.d: Likewise.
ld/
* testsuite/ld-i386/i386.exp: Run property-x86-5.
* testsuite/ld-i386/property-x86-5.d: New file.
* testsuite/ld-x86-64/property-x86-5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-5.d: Likewise.
* testsuite/ld-x86-64/property-x86-5a.s: Likewise.
* testsuite/ld-x86-64/property-x86-5b.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run property-x86-5 and
property-x86-5-x32.
The BFD linker with PR ld/23499 may generate shared libraries with
corrupt symbol version info which leads to linker error when the
corrupt shared library is used:
/usr/bin/ld: bin/libKF5Service.so.5.49.0: _edata: invalid version 21 (max 0)
/usr/bin/ld: bin/libKF5Service.so.5.49.0: error adding symbols: bad value
Add check for corrupt symbol version info to objdump:
00000000000af005 g D .data 0000000000000000 <corrupt> _edata
and readelf:
728: 00000000000af005 0 NOTYPE GLOBAL DEFAULT 25 _edata@<corrupt> (5)
bfd/
PR ld/23499
* elf.c (_bfd_elf_get_symbol_version_string): Return
_("<corrupt>") for corrupt symbol version info.
binutils/
PR ld/23499
* readelf.c (get_symbol_version_string): Return _("<corrupt>")
for corrupt symbol version info.
The older linker treats .note.gnu.property section as a generic note
and just concatenates all .note.gnu.property sections from the input
to the output. On CET-enabled OS, the output of the older linker is
marked as CET enabled, but in fact, it is not CET enabled and it crashes
on CET-enabled machines.
This patch defines GNU_PROPERTY_X86_UINT32_VALID. Linker is updated to
set the GNU_PROPERTY_X86_UINT32_VALID bit in GNU property note for
non-relocatable output to differentiate outputs from the older linker.
bfd/
* elfxx-x86.c (_bfd_x86_elf_parse_gnu_properties): Mask out the
GNU_PROPERTY_X86_UINT32_VALID bit.
(_bfd_x86_elf_link_fixup_gnu_properties): Set the
GNU_PROPERTY_X86_UINT32_VALID bit for non-relocatable output.
binutils/
* readelf.c (print_gnu_property_note): Check the
GNU_PROPERTY_X86_UINT32_VALID bit for invalid GNU property note.
include/
* elf/common.h (GNU_PROPERTY_X86_UINT32_VALID): New.
localentry:1 is a valid encoding, so display it. The patch also bails
out of get_ppc64_symbol_other when st_other bits besides the three
used for localentry offsets are set, to avoid hiding any such values.
* readelf.c (get_ppc64_symbol_other): Return NULL if st_other
field contains unrecognised or reserved values. Handle
localentry:1 value.
Fixes a bogus out of range error:
Number of section headers: 0 (210016)
Section header string table index: 1 <corrupt: out of range>
Caused due to e_shnum remaining as zero rather than being updated to
the value from section_header[0].sh_info at the point where we range
check e_shstrndx.
* readelf.c (process_file_header): Assign updated values from
section_header[0] fields to e_phnum, e_shnum and e_shstrndx
during printing of header. Correct e_shstrndx range check.
Remove unnecessary casts and use %u rather than %ld for
unsigned int header fields. Don't print a random %lx when
reporting an unknown EI_VERSION.
The strip-13 test runs into difficulty using dc.a on some targets.
dc.a writes a power of 2 number of bytes large enough to contain a
target address. On some targets, eg. avr-elf, this can be 2 bytes but
the ELF format used require words of 4 bytes to make up a relocation
entry. There was a hack in the test, duplicating the reloc type into
what is normally the addend to make the test work when little-endian,
but that hack fails for similar big-endian targets.
This patch fixes that problem by arranging to emit 32-bit and 64-bit
ELF relocs using .4byte and .8byte directives, chosen as appropriate
for the ELF size. I've also bumped the reloc number tested to a
higher unused value, and made the number more easily parameterised by
target should that be necessary in the future. Whether REL or RELA
relocs are used is now chosen by a new is_rela readelf test of an
object file, rather than by lists of targets.
* testsuite/lib/binutils-common.exp (is_elf64): Use directory of
input file for readelf.out.
(is_rela): New proc.
* testsuite/binutils-all/objcopy.exp (elf64): Set new variable
from first result of is_elf64 test.
(reloc_format): Set using is_rela.
(strip-13): Pass RELOC and ELF64 to assembler.
(strip-14, strip-15): Use elf64 rather than calling is_elf64 again.
* testsuite/binutils-all/strip-13.d: Run for more targets.
* testsuite/binutils-all/strip-13mips64.s: Use RELOC and set
addend to zero.
* testsuite/binutils-all/strip-13rel.s: Use RELOC and ELF64.
Don't add _NONE reloc.
* testsuite/binutils-all/strip-13rela.s: Likewise.
For GNU_PROPERTY_STACK_SIZE, pr_datasz is the same as align_size, which
is 8 bytes for 64-bit ELF binaries and 4 bytes for 32-bit ELF binaries,
Use align_size as pr_datasz for GNU_PROPERTY_STACK_SIZE to convert
.note.gnu.property section.
bfd/
PR binutils/23494
* elf-properties.c (elf_get_gnu_property_section_size): Always
use align_size as pr_datasz for GNU_PROPERTY_STACK_SIZE.
(elf_write_gnu_properties): Likewise.
binutils/
PR binutils/23494
* testsuite/binutils-all/x86-64/pr23494c.s: New file.
* testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise.
* testsuite/binutils-all/x86-64/pr23494e.d: Likewise.
As indicated by the subject, this patch adds support for the DWARF
expression opcode DW_OP_GNU_variable_value to readelf.
It's pretty much a copy/paste of DW_OP_call_ref with the obvious name
changes for the printf statements. The FIXME comment comes from that
copy/paste.
binutils/ChangeLog:
* dwarf.c (decode_location_expresion): Add case for
DW_OP_GNU_variable_value.
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc.
This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about.
bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY.
(BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise.
* Makefile.in: Regenerated.
* archures.c (enum bfd_architecture): Add bfd_arch_csky and
related bfd_mach defines.
(bfd_csky_arch): Declare.
(bfd_archures_list): Add C-SKY.
* bfd-in.h (elf32_csky_build_stubs): Declare.
(elf32_csky_size_stubs): Declare.
(elf32_csky_next_input_section: Declare.
(elf32_csky_setup_section_lists): Declare.
* bfd-in2.h: Regenerated.
* config.bfd: Add C-SKY.
* configure.ac: Likewise.
* configure: Regenerated.
* cpu-csky.c: New file.
* elf-bfd.h (enum elf_target_id): Add C-SKY.
* elf32-csky.c: New file.
* libbfd.h: Regenerated.
* reloc.c: Add C-SKY relocations.
* targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare.
(_bfd_target_vector): Add C-SKY target vector entries.
binutils* readelf.c: Include elf/csky.h.
(guess_is_rela): Handle EM_CSKY.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
(is_32bit_abs_reloc): Likewise.
include * dis-asm.h (csky_symbol_is_valid): Declare.
* opcode/csky.h: New file.
opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c.
* Makefile.in: Regenerated.
* configure.ac: Add C-SKY.
* configure: Regenerated.
* csky-dis.c: New file.
* csky-opc.h: New file.
* disassemble.c (ARCH_csky): Define.
(disassembler, disassemble_init_for_target): Add case for ARCH_csky.
* disassemble.h (print_insn_csky, csky_get_disassembler): Declare.
gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY.
(TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise.
* Makefile.in: Regenerated.
* config/tc-csky.c: New file.
* config/tc-csky.h: New file.
* config/te-csky_abiv1.h: New file.
* config/te-csky_abiv1_linux.h: New file.
* config/te-csky_abiv2.h: New file.
* config/te-csky_abiv2_linux.h: New file.
* configure.tgt: Add C-SKY.
* doc/Makefile.am (CPU_DOCS): Add entry for C-SKY.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set CSKY feature.
* doc/as.texi (Overview): Add C-SKY options.
(Machine Dependencies): Likewise.
* doc/c-csky.texi: New file.
* testsuite/gas/csky/*: New test cases.
ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations.
(ecskyelf.c, ecskyelf_linux.c): New rules.
* Makefile.in: Regenerated.
* configure.tgt: Add C-SKY.
* emulparams/cskyelf.sh: New file.
* emulparams/cskyelf_linux.sh: New file.
* emultempl/cskyelf.em: New file.
* gen-doc.texi: Add C-SKY.
* ld.texi: Likewise.
(Options specific to C-SKY targets): New section.
* testsuite/ld-csky/*: New tests.
* rdcoff.c (parse_coff_struct_type): Free fields array upon early
exit.
(parse_coff_enum_type): Free names and vals arrays upon early
exit.
* rddbg.c (read_section_stabs_debugging_info): Free shandle and
strings and stabs arrays upon early exit.
* readelf.c (get_32bit_section_headers): Free shdrs structure upon
early exit.
(get_64bit_section_headers): Likewise.
(get_32bit_elf_symbols): Generate an error if multiple symbol
table index sections are associated with the same symbol section.
(get_64bit_elf_symbols): Likewise.
(process_dynamic_section): Generate an error if there are multiple
dynamic symbol table sections, multiple dynamic string tables or
multiple dynamic symbol information sections.
binutils/
* MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
ISA maintenance.
gdb/
* MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
ISA maintenance.
sim/
* MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
ISA maintenance.
* objcopy.c (add_specific_symbols): Free buffer on exit.
(add_redefine_syms_file): Close file handle on exit.
(copy_object): Close file handle on early exit.
Free buffer on early exit.
Free gaps buffers once they are no longer needed.
* dwarf.c (display_debug_frames): Free allocated memory on exit.
(load_separate_debug_info): Free allocate memory on early exit.
The MMI instruction set has been implemented in many Loongson
processors. There is a lot of software optimized for MMI. This patch
splits MMI from loongson2f/3a, and adds GAS and disassembler options for
MMI instructions.
2018-07-20 Chenghua Xu <paul.hua.gm@gmail.com>
Maciej W. Rozycki <macro@mips.com>
bfd/
* elfxx-mips.c (print_mips_ases): Add MMI extension.
binutils/
* readelf.c (print_mips_ases): Add MMI extension.
gas/
* NEWS: Mention MultiMedia extensions Instructions (MMI)
support.
* config/tc-mips.c (options): Add OPTION_LOONGSON_MMI and
OPTION_NO_LOONGSON_MMI.
(md_longopts): Likewise.
(mips_ases): Define availability for MMI.
(mips_convert_ase_flags): Map ASE_LOONGSON_MMI to
AFL_ASE_LOONGSON_MMI.
(mips_cpu_info_table): Add ASE_LOONGSON_MMI for loongson2f/3a.
(md_show_usage): Add help for -mloongson-mmi and
-mno-loongson-mmi.
* doc/as.texi: Document -mloongson-mmi, -mno-loongson-mmi.
* doc/c-mips.texi: Document -mloongson-mmi, -mno-loongson-mmi,
.set loongson-mmi and .set noloongson-mmi.
* testsuite/gas/mips/loongson-2f.d: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-2f.s: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.s: Here.
* testsuite/gas/mips/loongson-3a.d: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-3a.s: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.s: Here.
* testsuite/gas/mips/mips.exp: Run loongson-2f-mmi and
loongson-3a-mmi tests.
include/
* elf/mips.h (AFL_ASE_MMI): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_MMI.
* opcode/mips.h (ASE_LOONGSON_MMI): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add MMI to loongson2f and
loongson3a descriptors.
(parse_mips_ase_option): Handle -M loongson-mmi option.
(print_mips_disassembler_options): Document -M loongson-mmi.
* mips-opc.c (LMMI): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI
instructions.
Binutils documentation uses a mix of spelling for the compound word
"command-line X". According to [1]:
"Sometimes compound words are written separately (nail polish),
sometimes with a hyphen (short-sighted) and sometimes as one word
(eyelashes). Often new compounds are written as two separate words and,
as they become more familiar, they are either connected with a hyphen
(-) or made into one word."
I think command-line X is common enough in our industry that the two
workds command and line should be connected. Since command-line is more
common than commandline, I propose to update binutils documentation to
consistently use "command-line" when this is used as an adjective to a
noun (eg. command-line argument, command-line switch, command-line
option and command-line flag). I've left occurences of "the command
line" as is. I've also left gdb, sim and readline alone and have only
touched public documentation (texi and NEWS files).
[1]
http://dictionary.cambridge.org/grammar/british-grammar/word-formation/compounds
2018-07-02 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* doc/bfdint.texi: Use command-line consistently when used in a
compount word.
* doc/bfdsumm.texi: Likewise.
binutils/
* NEWS: Use command-line consistently when used in a compount word.
* doc/binutils.texi: Likewise and fix trailing whitespace on same
line.
gas/
* NEWS: Use command-line consistently when used in a compount word.
* doc/as.texi: Likewise.
* doc/c-aarch64.texi: Likewise.
* doc/c-alpha.texi: Likewise.
* doc/c-arc.texi: Likewise.
* doc/c-arm.texi: Likewise.
* doc/c-avr.texi: Likewise.
* doc/c-bfin.texi: Likewise.
* doc/c-cris.texi: Likewise.
* doc/c-epiphany.texi: Likewise.
* doc/c-i386.texi: Likewise.
* doc/c-ia64.texi: Likewise.
* doc/c-lm32.texi: Likewise.
* doc/c-m32r.texi: Likewise.
* doc/c-m68k.texi: Likewise.
* doc/c-mips.texi: Likewise.
* doc/c-mmix.texi: Likewise.
* doc/c-msp430.texi: Likewise.
* doc/c-mt.texi: Likewise.
* doc/c-nios2.texi: Likewise.
* doc/c-ppc.texi: Likewise.
* doc/c-pru.texi: Likewise.
* doc/c-rl78.texi: Likewise.
* doc/c-rx.texi: Likewise.
* doc/c-tic6x.texi: Likewise.
* doc/c-v850.texi: Likewise.
* doc/c-vax.texi: Likewise.
* doc/c-visium.texi: Likewise.
* doc/c-xstormy16.texi: Likewise.
* doc/c-xtensa.texi: Likewise.
* doc/c-z80.texi: Likewise.
* doc/c-z8k.texi: Likewise.
* doc/internals.texi: Likewise.
gprof/
* gprof.texi: Use command-line consistently when used in a compount
word.
ld/
* NEWS: Use command-line consistently when used in a compount word.
* ld.texinfo: Likewise.
* ldint.texinfo: Likewise.
This adds a syntax table for dwarf-mode to dwarf-mode.el. I noticed
the need for this when trying to use mark-sexp (C-M-SPC) on a hex
number -- it copied the trailing ">" as well, which isn't desirable.
I've also bumped the version number to make this simpler to install
via the Emacs package system.
Tested locally. I'm checking this in.
binutils/ChangeLog
2018-06-25 Tom Tromey <tom@tromey.com>
* dwarf-mode.el (dwarf-mode-syntax-table): New variable.
Bump version number.
Also make the automake strictness "foreign". My regeneration of the
three doc/Makefile.in files already had --foreign in the automake
invocation, so this just makes it explicit.
bfd/
* doc/Makefile.am (AUTOMAKE_OPTIONS): Add "foreign".
* doc/Makefile.in: Regenerate.
binutils/
* doc/Makefile.am (AUTOMAKE_OPTIONS): Add "foreign".
* doc/Makefile.in: Regenerate.
gas/
* doc/Makefile.am (AUTOMAKE_OPTIONS): Add "foreign".
* doc/Makefile.in: Regenerate.
zlib/
* Makefile.in: Regenerate.
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* readelf.c (is_16bit_abs_reloc): Handle R_RISCV_SET16.
(is_8bit_abs_reloc): New function.
(is_6bit_abs_reloc): New function.
(is_6bit_inplace_sub_reloc): New function.
(apply_relocations): Use them. Handle 6-bit relocations.
Add support for the Global INValidate Application Specific Extension
for Release 6 of the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 187-191
bfd/
* elfxx-mips.c (print_mips_ases): Add GINV extension.
binutils/
* readelf.c (print_mips_ases): Add GINV extension.
gas/
* NEWS: Mention MIPS Global INValidate ASE support.
* config/tc-mips.c (options): Add OPTION_GINV and OPTION_NO_GINV.
(md_longopts): Likewise.
(mips_ases): Define availability for GINV.
(mips_convert_ase_flags): Map ASE_GINV to AFL_ASE_GINV.
(md_show_usage): Add help for -mginv and -mno-ginv.
* doc/as.texinfo: Document -mginv, -mno-ginv.
* doc/c-mips.texi: Document -mginv, -mno-ginv, .set ginv and
.set noginv.
* testsuite/gas/mips/ase-errors-1.s: Add error checks for GINV
ASE.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/ase-errors-1.l: Likewise.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ginv.d: New test.
* testsuite/gas/mips/ginv-err.d: New test.
* testsuite/gas/mips/ginv-err.l: New test stderr output.
* testsuite/gas/mips/ginv.s: New test source.
* testsuite/gas/mips/ginv-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
* elf/mips.h (AFL_ASE_GINV, AFL_ASE_RESERVED1): New macros.
(AFL_ASE_MASK): Update to include AFL_ASE_GINV.
* opcode/mips.h: Document "+\" operand format.
(ASE_GINV): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add GINV to mips32r6 and
mips64r6 descriptors.
(parse_mips_ase_option): Handle -Mginv option.
(print_mips_disassembler_options): Document -Mginv.
* mips-opc.c (decode_mips_operand) <+\>: New operand format.
(GINV): New macro.
(mips_opcodes): Define ginvi and ginvt.
Check VER_FLG_BASE instead of assuming that the first symbol version is
base version.
bfd/
PR binutils/23267
* elf.c (_bfd_elf_get_symbol_version_string): Check if the first
symbol version is base version.
binutils/
PR binutils/23267
* readelf.c (get_symbol_version_string): Check if the first
symbol version is base version.
Add support for the CRC Application Specific Extension for Release 6 of
the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 143-148
[2] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 165-170
ChangeLog:
bfd/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elfxx-mips.c (print_mips_ases): Add CRC.
binutils/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* readelf.c (print_mips_ases): Add CRC.
gas/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
Maciej W. Rozycki <macro@mips.com>
* config/tc-mips.c (options): Add OPTION_CRC and OPTION_NO_CRC.
(md_longopts): Likewise.
(md_show_usage): Add help for -mcrc and -mno-crc.
(mips_ases): Define availability for CRC and CRC64.
(mips_convert_ase_flags): Map ASE_CRC to AFL_ASE_CRC.
* doc/as.texinfo: Document -mcrc, -mno-crc.
* doc/c-mips.texi: Document -mcrc, -mno-crc, .set crc and
.set no-crc.
* testsuite/gas/mips/ase-errors-1.l: Add error checks for CRC
ASE.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ase-errors-1.s: Likewise.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/crc.d: New test.
* testsuite/gas/mips/crc64.d: New test.
* testsuite/gas/mips/crc-err.d: New test.
* testsuite/gas/mips/crc64-err.d: New test.
* testsuite/gas/mips/crc-err.l: New test stderr output.
* testsuite/gas/mips/crc64-err.l: New test stderr output.
* testsuite/gas/mips/crc.s: New test source.
* testsuite/gas/mips/crc64.s: New test source.
* testsuite/gas/mips/crc-err.s: New test source.
* testsuite/gas/mips/crc64-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elf/mips.h (AFL_ASE_CRC): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_CRC.
* opcode/mips.h (ASE_CRC): New macro.
* opcode/mips.h (ASE_CRC64): Likewise.
opcodes/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* mips-dis.c (mips_arch_choices): Add CRC and CRC64 ASEs.
* mips-opc.c (CRC, CRC64): New macros.
(mips_builtin_opcodes): Define crc32b, crc32h, crc32w,
crc32cb, crc32ch and crc32cw for CRC. Define crc32d and
crc32cd for CRC64.
Bump version number to 2.30.52 since _bfd_link_hide_symbol has been added
to bfd_target.
bfd/
* version.m4: Bump version to 2.30.52
* configure: Regenerated.
binutils/
* configure: Regenerated.
gas/
* configure: Regenerated.
gprof/
* configure: Regenerated.
ld/
* configure: Regenerated.
opcodes/
* configure: Regenerated.
Setting CC_FOR_TARGET from the environment CC was just plain wrong,
and no doubt the reason these tests were only run natively.
* testsuite/binutils-all/compress.exp (test_gnu_debuglink): Don't
set CC_FOR_TARGET. Run test non-native.
* testsuite/binutils-all/objdump.exp (test_build_id_debuglink):
Likewise.
(test_follow_debuglink): Run test non-native.
PR 23107
* ar.c (display_offsets): New variable.
(usage): Add description of 'O' operator.
(decode_option): Handle 'O' operator.
(print_descr): Pass display_offsets to print_arelt_descr.
* arsup.c: Update call to printy_arelt_descr.
* objdump.c: Likewise.
* bucomm.c (print_arelt_descr): If offsets parameter is true then
display offset of archive element within the archive.
* bucomm.h: Update prototype for print_arelt_descr.
* doc/binutils.texi: Update description of ar command.
* NEWS: Mention the new feature.
* testsuite/binutils-all/ar.exp: Add text of new feature.
H.J. Lu
Alan Modra
Thomas Preud'homme
John Darrington
Nick Clifton
Andreas Schwab
Chenghua Xu
L. Simon
Kevin Buettner
Claudiu Zissulescu
claziss
Andrew Jenner
Maciej W. Rozycki
DJ Delorie
Pedro Franco de Carvalho
Francois H. Theron
Thomas Preud'homme
Tom Tromey
Simon Marchi
Faraz Shahbazker
Scott Egerton
Ant Bikeneev