8ebac3aae9
* ppc-opc.c (ISA_V2): Define and use for relevant BO field tests.
...
(valid_bo_pre_v2, valid_bo_post_v2): New functions, extracted from..
(valid_bo): ..here. When disassembling, accept either 'y' or 'at'
type encoding on second pass.
(powerpc_opcodes): Use ISA_V2 to enable branch insns rather than
POWER4.
* ppc-dis.c (print_insn_powerpc): Delete dialect_orig. Instead
ignore deprecated on second pass.
2011-12-13 08:19:02 +00:00
7102e95e49
gas/:
...
* config/tc-ppc.c (ppc_set_cpu): Cast PPC_OPCODE_xxx to ppc_cpu_t
before inverting.
binutils/:
* ppc-dis.c (powerpc_init_dialect): Cast PPC_OPCODE_xxx to
ppc_cpu_t before inverting.
2010-07-03 08:27:23 +00:00
bdc70b4a03
include/opcode/
...
* ppc.h (PPC_OPCODE_32, PPC_OPCODE_BOOKE64, PPC_OPCODE_CLASSIC): Delete.
Renumber other PPC_OPCODE defines.
gas/
* config/tc-ppc.c (ppc_set_cpu): Remove old opcode flags.
(ppc_setup_opcodes): Likewise. Simplify opcode selection.
opcodes/
* ppc-dis.c (ppc_opts, powerpc_init_dialect): Remove old opcode flags.
* ppc-opc.c (PPC32, POWER32, COM32, CLASSIC): Delete.
(PPC64, MFDEC2): Update.
(NON32, NO371): Define.
(powerpc_opcode): Update to not use old opcode flags, and avoid
-m601 duplicates.
2010-07-03 06:51:56 +00:00
e01d869a3b
gas/
...
* config/tc-ppc.c (md_assemble): Emit APUinfo section for
PPC_OPCODE_E500.
gas/testsuite/
* gas/ppc/e500.s: Add eieio, mbar and lwsync
* gas/ppc/e500.d: Likewise.
include/opcode/
* ppc.h (PPC_OPCODE_E500): Define.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_E500MC from e500 and
e500x2. Add PPC_OPCODE_E500 to e500 and e500x2
* ppc-opc.c (powerpc_opcodes): Deprecate all opcodes on EFS which
touch floating point regs and are enabled by COM, PPC or PPCCOM.
Treat sync as msync on e500. Treat eieio as mbar 1 on e500.
Treat lwsync as msync on e500.
2010-06-14 14:48:05 +00:00
63d0fa4e9e
* ppc-dis.c (ppc_opts): Add PPC_OPCODE_E500MC for "e500mc64".
2010-02-25 01:00:13 +00:00
cdc51b0748
gas/
...
* config/tc-ppc.c (md_show_usage): Add -mpwr4, -mpwr5, -mpwr5x,
-mpwr6 and -mpwr7.
opcodes/
* ppc-dis.c (ppc_opts): Add "pwr4", "pwr5", "pwr5x", "pwr6"
and "pwr7". Move "a2" into alphabetical order.
2010-02-10 19:59:07 +00:00
ce3d2015b2
include/
...
* opcode/ppc.h (PPC_OPCODE_TITAN): Define.
bfd/
* archures.c (bfd_mach_ppc_titan): Define.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add titan entry.
opcodes/
* ppc-dis.c (ppc_opts): Add titan entry.
* ppc-opc.c (TITAN, MULHW): Define.
(powerpc_opcodes): Support AppliedMicro Titan core (APM83xxx).
gas/
* config/tc-ppc.c (md_show_usage): Mention -mtitan. Don't use tabs.
(ppc_mach): Handle titan.
* doc/c-ppc.texi: Mention -mtitan.
gas/testsuite/
* gas/ppc/titan.d, * gas/ppc/titan.s: New test.
* gas/ppc/ppc.exp: Run it.
2010-02-08 01:59:38 +00:00
0dc9305793
bfd/
...
* archures.c: Add bfd_mach_ppc_e500mc64.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add entry for
bfd_mach_ppc_e500mc64.
gas/
* config/tc-ppc.c (md_show_usage): Document -me500mc64.
opcodes/
* ppc-dis.c (ppc_opts): Add entry for "e500mc64".
2010-01-04 02:32:56 +00:00
9fe54b1ca1
gas/
...
* config/tc-ppc.c (md_show_usage): Document -m476.
* doc/c-ppc.texi (PowerPC-Opts): Document -m476.
gas/testsuite/
* gas/ppc/476.s: New test.
* gas/ppc/476.d: Likewise.
* gas/ppc/ppc.exp: Run the 476 test.
include/opcode/
* ppc.h (PPC_OPCODE_476): Define.
opcodes/
* ppc-dis.c (ppc_opts): Add "476" entry.
* ppc-opc.c (PPC476): Define.
(powerpc_opcodes): Update mnemonics where required for 476.
2009-10-02 14:42:42 +00:00
634b50f2a6
gas/
...
* config/tc-ppc.c (md_show_usage): Rename "ppca2" to "a2".
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
gas/testsuite/
* gas/ppc/a2.d: Rename "ppca2" to "a2".
include/opcode/
* ppc.h (PPC_OPCODE_A2): Rename from PPC_OPCODE_PPCA2.
opcodes/
* ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
* ppc-dis.c (ppc_opts): Likewise.
Rename "ppca2" to "a2".
2009-10-01 19:24:48 +00:00
e0d602ecff
gas/
...
* config/tc-ppc.c (md_show_usage): Document -mpcca2.
* doc/c-ppc.texi (PowerPC-Opts): Document -mppca2.
gas/testsuite/
* gas/ppc/a2.s: New.
* gas/ppc/a2.d: Likewise.
* gas/ppc/ppc.exp: Run the a2 dump test.
include/opcode/
* ppc.h (PPC_OPCODE_PPCA2): New.
opcodes/
* ppc-dis.c (ppc_opts): Add "ppca2" entry.
* ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
ici mnemonics.
(ERAT_T): New operand.
(XWC_MASK): New mask.
(XOPL2): New macro.
(PPCA2): Define.
2009-09-21 10:29:07 +00:00
70dc4e324b
opcodes/
...
* ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
due to -many/-Many.
(print_insn_powerpc): Make sure we only deprecate instructions using
the original dialect and not a modified dialect due to -Many handling.
Move the handling of the condition register and default operands to
the end of the if/else if/else chain.
* ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
instructions from newer processors are listed before older ones.
<"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
that have instructions with conflicting opcodes.
2009-04-02 13:30:56 +00:00
69fe9ce501
include/opcode/
...
* ppc.h (ppc_parse_cpu): Declare.
opcodes/
* ppc-dis.c: Include "opintl.h".
(struct ppc_mopt, ppc_opts): New.
(ppc_parse_cpu): New function.
(powerpc_init_dialect): Use it.
(print_ppc_disassembler_options): Dump options from ppc_opts.
Internationalize message.
gas/
* config/tc-ppc.c (parse_cpu): Delete.
(md_parse_option, ppc_machine): Use ppc_parse_cpu.
gas/testsuite/
* gas/ppc/altivec_and_spe.d (objdump): Add -Maltivec.
* gas/ppc/common.d: Adjust for -Mcom not including -Mppc.
2009-03-10 06:53:46 +00:00
066be9f7bd
gas/
...
* config/tc-ppc.c (pre_defined_registers): Add "f32" to "f63",
"f.32" to "f.63", "vs0" to "vs63" and "vs.0" to "vs.63".
(parse_cpu): Extend -mpower7 to accept power7 and isel instructions.
gas/testsuite/
* gas/ppc/e500mc.d ("wait", "waitsrv", "waitimpl"): Add tests.
* gas/ppc/e500mc.s: Likewise.
* gas/ppc/power6.d ("cdtbcd", "cbcdtd", "addg6s"): Add tests.
* gas/ppc/power6.s: Likewise.
* gas/ppc/power7.d ("lfdpx", "mffgpr", "mftgpr"): Remove invalid tests.
("wait", "waitsrv", "waitimpl", "divwe", "divwe.", "divweo", "divweo.",
"divweu", "divweu.", "divweuo", "divweuo.", "bpermd", "popcntw",
"popcntd", "ldbrx", "stdbrx", "lfiwzx", "lfiwzx", "fcfids", "fcfids.",
"fcfidus", "fcfidus.", "fctiwu", "fctiwu.", "fctiwuz", "fctiwuz.",
"fctidu", "fctidu.", "fctiduz", "fctiduz.", "fcfidu", "fcfidu.",
"ftdiv", "ftdiv", "ftsqrt", "ftsqrt", "dcbtt", "dcbtstt", "dcffix",
"dcffix.", "lbarx", "lbarx", "lbarx", "lharx", "lharx", "lharx",
"stbcx.", "sthcx.", "fre", "fre.", "fres", "fres.", "frsqrte",
"frsqrte.", "frsqrtes", "frsqrtes.", "isel"): Add tests.
* gas/ppc/power7.s: Likewise.
* gas/ppc/vsx.d: New test.
* gas/ppc/vsx.s: Likewise.
* gas/ppc/ppc.exp: Run it.
include/opcode/
* ppc.h (PPC_OPCODE_POWER7): New.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
the power7 and the isel instructions.
* ppc-opc.c (insert_xc6, extract_xc6): New static functions.
(insert_dm, extract_dm): Likewise.
(XB6): Update comment to include XX2 form.
(WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
(RemoveXX3DM): Delete.
(powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
"mftgpr">: Deprecate for POWER7.
<"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
"frsqrte.">: Deprecate the three operand form and enable the two
operand form for POWER7 and later.
<"wait">: Extend to accept optional parameter. Enable for POWER7.
<"waitsrv", "waitimpl">: Add extended opcodes.
<"ldbrx", "stdbrx">: Enable for POWER7.
<"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
<"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
"divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
"divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
"divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
"fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
"fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
"lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
<"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
"stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
"xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
"xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
"xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
"xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
"xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
"xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
"xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
"xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
"xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
"xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
"xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
"xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
"xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
"xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
"xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
"xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
"xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
"xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
"xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
"xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
"xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
"xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
"xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
"xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
"xxspltw", "xxswapd">: Add VSX opcodes.
2009-02-26 22:07:33 +00:00
21169fcfad
opcodes/
...
* ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
* ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
operand form and enable the four operand form for POWER6 and later.
<mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
three operand form for POWER6 and later.
gas/testsuite/
* gas/ppc/power6.s ("mtfsf", "mtfsf.", "mtfsfi", "mtfsfi."): Add tests.
* gas/ppc/power6.d: Likewise.
2009-01-15 04:27:28 +00:00
2f3bb96af7
opcodes/
...
* ppc-dis.c (powerpc_init_dialect): Do not set PPC_OPCODE_BOOKE
for -Mbooke.
(print_ppc_disassembler_options): Update usage.
* ppc-opc.c (DE, DES, DEO, DE_MASK): Remove.
(BOOKE64): Remove.
(PPCCHLK64): Likewise.
(powerpc_opcodes): Remove all BOOKE64 instructions.
gas/
* config/tc-ppc.c (parse_cpu): Remove booke64 support. Update
usage strings.
(ppc_setup_opcodes): Likewise, remove booke64 support.
* doc/c-ppc.texi (PowerPC-Opts): Remove -mbooke32 and -mbooke64.
* doc/as.texinfo (Overview): Likewise.
binutils/
* doc/binutils.texi (objdump): Update booke documentation.
* NEWS: Document user-visible changes to command line options.
2008-12-04 10:29:16 +00:00
9b4e57660d
gas/
...
* config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags.
Handle -mvsx and -mpower7.
(md_show_usage): Document -mpower7 and -mvsx.
* doc/as.texinfo (Target PowerPC): Document -mvsx.
* doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7.
gas/testsuite/
* gas/ppc/power7.d: New.
* gas/ppc/power7.s: Likewise.
* gas/ppc/ppc.exp: Run power7 test.
include/opcode/
* ppc.h (PPC_OPCODE_VSX, PPC_OPERAND_VSR): New.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Handle power7 and vsx options.
(print_insn_powerpc): Prepend 'vs' when printing VSX registers.
(print_ppc_disassembler_options): Document -Mpower7 and -Mvsx.
* ppc-opc.c (insert_xt6): New static function.
(extract_xt6): Likewise.
(insert_xa6): Likewise.
(extract_xa6: Likewise.
(insert_xb6): Likewise.
(extract_xb6): Likewise.
(insert_xb6s): Likewise.
(extract_xb6s): Likewise.
(XS6, XT6, XA6, XB6, XB6S, DM, XX3, XX3DM, XX1_MASK, XX3_MASK,
XX3DM_MASK, PPCVSX): New.
(powerpc_opcodes): Add opcodes "lxvd2x", "lxvd2ux", "stxvd2x",
"stxvd2ux", "xxmrghd", "xxmrgld", "xxpermdi", "xvmovdp", "xvcpsgndp".
2008-08-02 04:38:51 +00:00
081ba1b3c0
include/opcode/
...
* ppc.h (PPC_OPCODE_405): Define.
(PPC_OPERAND_FSL, PPC_OPERAND_FCR, PPC_OPERAND_UDI): Define.
gas/
* config/tc-ppc.c (parse_cpu): Separate handling of -m403/405.
(md_show_usage): Likewise.
opcodes/
* ppc-dis.c (print_insn_powerpc): Disassemble FSL/FCR/UDI fields.
* ppc-opc.c (powerpc_operands): Add Xilinx APU related operands.
(insert_sprg, PPC405): Use PPC_OPCODE_405.
(powerpc_opcodes): Add Xilinx APU related opcodes.
2008-07-30 06:29:22 +00:00
c8187e1509
gas/
...
* config/tc-ppc.c (parse_cpu): Handle -m464.
(md_show_usage): Likewise.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Handle -M464.
(print_ppc_disassembler_options): Likewise.
* ppc-opc.c (PPC464): Define.
(powerpc_opcodes): Add mfdcrux and mtdcrux.
2008-06-25 16:49:03 +00:00
fa452fa683
include/opcode/
...
* ppc.h (ppc_cpu_t): New typedef.
(struct powerpc_opcode <flags>): Use it.
(struct powerpc_operand <insert, extract>): Likewise.
(struct powerpc_macro <flags>): Likewise.
gas/
* config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
(ppc_insert_operand): Likewise.
(ppc_machine): Likewise.
* config/tc-ppc.h: #include "opcode/ppc.h"
(struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
(ppc_cpu): Update extern decl.
opcodes/
* ppc-dis.c (print_insn_powerpc): Update prototye to use new
ppc_cpu_t typedef.
(struct dis_private): New.
(POWERPC_DIALECT): New define.
(powerpc_dialect): Renamed to...
(powerpc_init_dialect): This. Update to use ppc_cpu_t and
struct dis_private.
(print_insn_big_powerpc): Update for using structure in
info->private_data.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Change type of dialect param to ppc_cpu_t.
(skip_optional_operands): Likewise.
(print_insn_powerpc): Likewise. Remove initialization of dialect.
* ppc-opc.c (extract_bat, extract_bba, extract_bdm, extract_bdp,
extract_bo, extract_boe, extract_fxm, extract_mb6, extract_mbe,
extract_nb, extract_nsi, extract_rbs, extract_sh6, extract_spr,
extract_sprg, extract_tbr insert_bat, insert_bba, insert_bdm,
insert_bdp, insert_bo, insert_boe, insert_fxm, insert_mb6, insert_mbe,
insert_nsi, insert_ral, insert_ram, insert_raq, insert_ras, insert_rbs,
insert_sh6, insert_spr, insert_sprg, insert_tbr): Change the dialect
param to be of type ppc_cpu_t. Update prototype.
2008-06-13 20:16:00 +00:00
19a6653ce8
ppc e500mc support
2008-04-14 11:01:38 +00:00
c3d65c1ced
binutils/
...
* doc/binutils.texi (objdump): Document -Mppcps.
gas/
* config/tc-ppc.c (parse_cpu): Handle "750cl".
(pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
(md_show_usage): Document -m750cl.
(md_assemble): Handle two delimiters in succession (eg. `),').
* doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
* testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
* testsuite/gas/ppc/ppc750ps.s: New file.
* testsuite/gas/ppc/ppc750ps.d: Likewise.
include/opcode/
* ppc.h (PPC_OPCODE_PPCPS): New.
opcodes/
* ppc-opc.c (PSW, PSWM, PSQ, PSQM, PSD, MTMSRD_L): New.
(XOPS, XOPS_MASK, XW, XW_MASK): Likewise.
(PPCPS): Likewise.
(powerpc_opcodes): Add all pair singles instructions.
* ppc-dis.c (powerpc_dialect): Handle "ppcps".
(print_ppc_disassembler_options): Document -Mppcps.
2007-08-24 00:56:30 +00:00
9b201bb5e5
Change source files over to GPLv3.
2007-07-05 09:49:03 +00:00
65b650b4c7
* ppc-dis.c (print_insn_powerpc): Don't skip all operands
...
after setting skip_optional.
2007-05-18 01:32:58 +00:00
ea192fa395
* ppc-dis.c (operand_value_powerpc, skip_optional_operands): New.
...
(print_insn_powerpc): Use the new operand_value_powerpc and
skip_optional_operands functions to omit or print all optional
operands as a group.
* ppc-opc.c (BFF, W, XFL_L, XWRA_MASK): New.
(XFL_MASK): Delete L and W bits from the mask.
(mtfsfi, mtfsfi.): Replace use of BF with BFF. Relpace use of XRA_MASK
with XWRA_MASK. Use W.
(mtfsf, mtfsf.): Use XFL_L and W.
2007-05-17 00:52:14 +00:00
b84bf58af1
include/opcode/
...
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 12:25:15 +00:00
64a3a6fcf9
* ppc-dis.c (powerpc_dialect): Handle ppc440.
...
* ppc-dis.c (print_ppc_disassembler_options): Note the -M440 can be used.
2007-02-02 12:37:41 +00:00
ede602d7c8
Add powerpc cell support.
2006-10-24 01:27:29 +00:00
9622b051cf
include/opcode/
...
* ppc.h (PPC_OPCODE_POWER6): Define.
Adjust whitespace.
gas/
* config/tc-ppc.c (parse_cpu): Handle "-mpower6".
(md_show_usage): Document it.
(ppc_setup_opcodes): Test power6 opcode flag bits.
* doc/c-ppc.texi (PowerPC-Opts): Document "-mpower6".
opcodes/
* ppc-dis.c (powerpc_dialect): Handle power6 option.
(print_ppc_disassembler_options): Mention power6.
2006-06-07 05:23:59 +00:00
6edfbbad08
bfd/
...
* elf32-arm.c (elf32_arm_check_relocs): Avoid aliasing warnings from
GCC.
(elf32_arm_size_dynamic_sections): Likewise.
* ecofflink.c (bfd_ecoff_debug_one_external): Likewise.
* elf32-hppa.c (elf32_hppa_check_relocs): Likewise.
* elf32-m32r.c (m32r_elf_check_relocs): Likewise.
* elf32-m68k.c (elf_m68k_check_relocs): Likewise.
* elf32-ppc.c (ppc_elf_check_relocs): Likewise.
* elf32-s390.c (elf_s390_check_relocs): Likewise.
(elf_s390_size_dynamic_sections): Likewise.
* elf32-sh.c (sh_elf_check_relocs): Likewise.
* elf64-ppc.c (ppc64_elf_check_relocs, dec_dynrel_count)
(ppc64_elf_size_dynamic_sections): Likewise.
* elf64-s390.c (elf_s390_check_relocs): Likewise.
(elf_s390_size_dynamic_sections): Likewise.
* elfxx-mips.c (_bfd_mips_elf_finish_dynamic_sections): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_check_relocs): Likewise.
(_bfd_sparc_elf_size_dynamic_sections): Likewise.
* ieee.c (ieee_slurp_section_data): Likewise.
* oasys.c (oasys_slurp_section_data): Likewise.
opcodes/
* ppc-dis.c (struct dis_private): Remove.
(powerpc_dialect): Avoid aliasing warnings.
(print_insn_big_powerpc, print_insn_little_powerpc): Likewise.
2005-10-06 19:21:14 +00:00
36ae0db314
gas/
...
* config/tc-ppc.c (parse_cpu): Add -me300 support.
(md_show_usage): Likewise.
* doc/c-ppc.texi (PowerPC-Opts): Document it.
include/opcode/
* ppc.h (PPC_OPCODE_E300): Define.
opcodes/
* ppc-dis.c (powerpc_dialect): Handle e300.
(print_ppc_disassembler_options): Likewise.
* ppc-opc.c (PPCE300): Define.
(powerpc_opcodes): Mark icbt as available for the e300.
binutils/
* doc/binutils.texi (objdump): Document -M e300.
2005-08-15 15:37:15 +00:00
0fd3a4776c
Kaveh Ghazi's printf format attribute checking patch.
...
bfd:
* elf32-xtensa.c (vsprint_msg): Add format attribute. Fix
format bugs.
* vms.h (_bfd_vms_debug): Add format attribute.
(_bfd_vms_debug, _bfd_hexdump): Fix typos.
binutils:
* bucomm.h (report): Add format attribute.
* dlltool.c (inform): Likewise.
* dllwrap.c (display, inform, warn): Likewise.
* objdump.c (objdump_sprintf): Likewise.
* readelf.c (error, warn): Likewise. Fix format bugs.
gas:
* config/tc-tic30.c (debug): Add format attribute. Fix format
bugs.
include:
* dis-asm.h (fprintf_ftype): Add format attribute.
opcodes:
* arc-dis.c, arm-dis.c, cris-dis.c, crx-dis.c, d10v-dis.c,
d30v-dis.c, fr30-dis.c, h8300-dis.c, h8500-dis.c, i860-dis.c,
ia64-dis.c, ip2k-dis.c, m10200-dis.c, m10300-dis.c,
m88k-dis.c, mcore-dis.c, mips-dis.c, ms1-dis.c, or32-dis.c,
ppc-dis.c, sh64-dis.c, sparc-dis.c, tic4x-dis.c, tic80-dis.c,
v850-dis.c: Fix format bugs.
* ia64-gen.c (fail, warn): Add format attribute.
* or32-opc.c (debug): Likewise.
2005-07-07 19:27:52 +00:00
1ed8e1e4fb
* ppc-dis.c (powerpc_dialect): Handle "-Mpower5".
...
(print_ppc_disassembler_options): Document it.
* ppc-opc.c (SCV_LEV): Define.
(LEV): Allow optional operand.
(POWER5): Define.
(powerpc_opcodes): Extend "sc". Adjust "svc" and "svcl". Add
"hrfid", "popcntb", "fsqrtes", "fsqrtes.", "fre" and "fre.".
2005-05-19 07:00:40 +00:00
f432110413
Update the address and phone number of the FSF
2005-05-07 07:34:31 +00:00
4eb30afc41
* ppc-dis.c (powerpc_dialect): Don't set PPC_OPCODE_ALTIVEC when
...
BOOKE.
2005-03-16 02:38:39 +00:00
fdd12ef3c6
opcodes/
...
* ppc-dis.c (print_insn_powerpc): Don't print tabs. Handle
PPC_OPERANDS_GPR_0.
* ppc-opc.c (RA0): Define.
(RAQ, RAL, RAM, RAS, RSQ, RTQ, RSO): Use PPC_OPERAND_GPR_0.
(RAOPT): Rename from RAO. Update all uses.
(powerpc_opcodes): Use RA0 as appropriate. Add "lsdx", "lsdi",
"stsdx", "stsdi", "lmd" and "stmd" insns.
include/opcode/
* ppc.h (PPC_OPERAND_GPR_0): Define. Bump other operand defines.
gas/testsuite/
Update gas/ppc/.
ld/testsuite/
Update ld-powerpc/.
2004-03-16 00:58:43 +00:00
661bd698e4
* ppc-dis.c (struct dis_private): New.
...
(powerpc_dialect): Make static. Accept -Many in addition to existing
options. Save dialect in dis_private.
(print_insn_big_powerpc): Retrieve dialect from dis_private.
(print_insn_little_powerpc): Likewise.
(print_insn_powerpc): Call powpc_dialect here. Remove unnecessary
efs/altivec check. Try harder to disassemble if given -Many.
* ppc-opc.c (insert_fxm): Expand comment.
(PPC, PPCCOM, PPC32, PPC64, PPCVEC): Remove PPC_OPCODE_ANY.
(POWER, POWER2, PPCPWR2, POWER32, COM, COM32, M601, PWRCOM): Likewise.
(POWER4): Remove PPCCOM.
(PPCONLY): Don't define. Update all occurrences to PPC.
2003-09-04 01:51:37 +00:00
823bbe9d95
* ppc-opc.c (powerpc_opcodes): Combine identical PPC403/BOOKE entries.
...
Move duplicate mnemonic entries together. Use RS instead of RT on
all mt*.
* ppc-dis.c: Convert to ISO C.
2003-09-02 04:15:29 +00:00
8427c42425
* ppc-opc.c: Remove NULL pointer checks. Formatting. Remove
...
extraneous ATTRIBUTE_UNUSED.
* ppc-dis.c (print_insn_powerpc): Always pass a valid address to
operand->extract.
2003-07-07 01:34:04 +00:00
8b4fa15520
* ppc-dis.c (print_insn_powerpc): Correct condition register display.
2002-11-12 04:03:31 +00:00
9ec878e367
* ppc-dis.c (powerpc_dialect): Add missing PPC_OPCODE_CLASSIC.
2002-09-12 03:58:37 +00:00
07dd56a969
Have objdump's --help switch document PPC -M options.
2002-09-04 10:08:08 +00:00
2397604975
2002-08-19 Elena Zannoni <ezannoni@redhat.com>
...
From matthew green <mrg@redhat.com>
* ppc-dis.c (powerpc_dialect): Support `-m500', `-m500x2' and
`-mefs'. Turn off AltiVec for E500 and efs.
(print_insn_powerpc): Don't print an AltiVec instruction if the
dialect is not efs.
* ppc-opc.c (insert_pmrn, extract_pmrn, insert_ev2, extract_ev2,
insert_ev4, extract_ev4, insert_ev8, extract_ev8): New functions
for extracting pmrn/evld/evstd/etc operands.
(CRB, CRFD, CRFS, DC, RD): New instruction fields.
(CT): Make this equal to RD + 1.
(PMRN): New operand.
(RA): Update.
(EVUIMM, EVUIMM_2, EVUIMM_4, EVUIMM_8): New operands.
(WS): Update.
(EVSEL, EVSEL_MASK): New instruction form and mask for EVSEL.
(ISEL, ISEL_MASK): New instruction form and mask for ISEL.
(XISEL, XISEL_MASK): New instruction form and mask for ISEL.
(CTX, CTX_MASK): New instruction form and mask for context cache
instructions.
(UCTX, UCTX_MASK): New instruction form and mask for user context
cache instructions.
(XC, XC_MASK, XUC, XUC_MASK): New instruction forms.
(CLASSIC): New define.
(PPCESPE): New define.
(PPCISEL, , PPCBRLK, PPCPMR, PPCCHLK, PPCRFMI): New
defines for integer select, cache control, branch
locking, power management, cache locking and machine check
APU instructions, respectively.
(efsabs, efsnabs, efsneg, efsadd, efssub, efsmul,
efsdiv, efscmpgt, efscmplt, efscmpeq, efststgt, efststlt,
efststeq, efscfui, efsctuiz, efscfsi, efscfuf, efscfsf,
efsctui, efsctsi, efsctsiz, efsctuf, efsctsf,
evaddw, evaddiw, evsubfw, evsubifw, evabs, evneg, evextsb,
evextsh, evrndw, evcntlzw, evcntlsw, brinc, evand, evandc, evor,
evorc, evxor, eveqv, evnand, evnor, evrlw, evrlwi, evslw, evslwi,
evsrws, evsrwu, evsrwis, evsrwiu, evsplati, evsplatfi, evmergehi,
evmergelo, evmergehilo, evmergelohi, evcmpgts, evcmpgtu, evcmplts,
evcmpltu, evcmpeq, evsel, evldd, evlddx, evldw, evldwx, evldh,
evldhx, evlwhe, evlwhex, evlwhou, evlwhoux, evlwhos, evlwhosx,
evlwwsplat, evlwwsplatx, evlwhsplat, evlwhsplatx, evlhhesplat,
evlhhesplatx, evlhousplat, evlhousplatx, evlhossplat, evlhossplatx,
evstdd, evstddx, evstdw, evstdwx, evstdh, evstdhx, evstwwe,
evstwwex, evstwwo, evstwwox, evstwhe, evstwhex, evstwho, evstwhox,
evfsabs, evfsnabs, evfsneg, evfsadd, evfssub, evfsmul, evfsdiv,
evfscmpgt, evfscmplt, evfscmpeq, evfststgt, evfststlt, evfststeq,
evfscfui, evfsctuiz, evfscfsi, evfscfuf, evfscfsf, evfsctui,
evfsctsi, evfsctsiz, evfsctuf, evfsctsf, evsabs, evsnabs, evsneg,
evsadd, evssub, evsmul, evsdiv, evscmpgt, evsgmplt, evsgmpeq,
evststgt, evststlt, evststeq, evscfui, evscfsi, evscfuf, evscfsf,
evsctui, evsctuiz, evsctsi, evsctsiz, evsctuf, evsctsf, evmhossf,
evmhossfa, evmhosmf, evmhosmfa, evmhosmi, evmhosmia, evmhoumi,
evmhoumia, evmhessf, evmhessfa, evmhesmf, evmhesmfa, evmhesmi,
evmhesmia, evmheumi, evmheumia, evmhossfaaw, evmhossiaaw,
evmhosmfaaw, evmhosmiaaw, evmhousiaaw, evmhoumiaaw, evmhessfaaw,
evmhessiaaw, evmhesmfaaw, evmhesmiaaw, evmheusiaaw, evmheumiaaw,
evmhossfanw, evmhossianw, evmhosmfanw, evmhosmianw, evmhousianw,
evmhoumianw, evmhessfanw, evmhessianw, evmhesmfanw, evmhesmianw,
evmheusianw, evmheumianw, evmhogsmfaa, evmhogsmiaa, evmhogumiaa,
evmhegsmfaa, evmhegsmiaa, evmhegumiaa, evmhogsmfan, evmhogsmian,
evmhogumian, evmhegsmfan, evmhegsmian, evmhegumian, evmwhssf,
evmwhssfa, evmwhssfaa, evmwhssmaa, evmwhsmfaa, evmwhsmiaa,
evmwhusiaa, evmwhumiaa, evmwhssfan, evmwhssian, evmwhsmfan,
evmwhsmian, evmwhusian, evmwhumian, evmwhgssfaa, evmwhgsmfaa,
evmwhgsmiaa, evmwhgumiaa, evmwhgssfan, evmwhgsmfan, evmwhgsmian,
evmwhgumian, evmwhsmf, evmwhsmfa, evmshsmi, evmshsmia, evmshumi,
evmshumia, evmmlssf, evmmlssfa, evmwlsmf, evmwlsmfa, evmwlumi,
evmwlumia, evmwlssfaaw, evmwlssiaaw, evmwlsmfaaw, evmwlsmiaaw,
evmwlusiaaw, evmwlumiaaw, evmwissfanw, evmwissianw, evmwlsmfanw,
evmwlsmianw, evmwlusianw, evmwlumianw, evmwssf, evmwssfa,
evmwsmf, evmwsmfa, evmwsmi, evmwsmia, evmwumi, evmwumia,
evmwssfaa, evmwsmfaa, evmwsmiaa, evmwumiaa, evmwssfan, evmwsmfan,
evmwsmian, evmwumian, evaddssiaaw, evaddsmiaaw, evaddusiaaw,
evaddumiaaw, evsubfssiaaw, evsubfsmiaaw, evsubfusiaaw,
evsubfumiaaw, evmra, evdivws, evdivws): New e500x2 Core Complex
instructions.
(rfmci): New machine check APU instruction.
(isel): New integer select APU instructino.
(icbtls, icbtlse, icblc, icblce, dcbtls, dcbtlse, dcbtstls,
dcbtstlse, dcblc, dcblce): New cache control APU instructions.
(mtspefscr, mfspefscr): New instructions.
(mfpmr, mtpmr): New performance monitor APU instructions.
(savecontext): New context cache APU instructions.
(bblels, bbelr): New branch locking APU instructions.
(bblels, bbelr): New instructions.
(mftbl, mftbu, mftb): Set as CLASSIC instructions. Add BOOKE alias.
2002-08-19 20:59:10 +00:00
94efba1253
* ppc-dis.c (powerpc_dialect): Handle power4 option.
...
* ppc-opc.c (insert_bdm): Correct description of "at" branch
hints. Test PPC_OPCODE_POWER4 to determine branch hint flavour.
(extract_bdm, insert_bdp, extract_bdp, valid_bo): Likewise.
(BOFM64, BOFP64, BOTM64, BOFP64): Rename to BOFM4, BOFP4 etc.
(BODNZM64, BODNZP64, BODZM64, BODZP64): Likewise.
(PPCCOM32, PPCCOM64): Delete.
(NOPOWER4, POWER4): Define.
(powerpc_opcodes): Replace occurences of PPCCOM32 with NOPOWER4,
and PPCCOM4 with POWER4 so that "at" style branch hint opcodes
are enabled for power4 rather than ppc64.
2002-02-25 03:43:46 +00:00
9a0ccb2478
* ppc-opc.c (powerpc_dialect): Fix comment; BookE is not Motorola
...
specific.
2002-02-19 15:20:26 +00:00
802a735ed9
binutils/ChangeLog
...
* doc/binutils.texi (objdump): Document ppc -M options.
gas/ChangeLog
* config/tc-ppc.c (ppc_insert_operand): Pass (ppc_cpu | ppc_size)
to operand->insert.
(md_assemble): Likewise.
gas/testsuite/ChangeLog
* gas/ppc/booke.d: Modify reloc and target matches for powerpc64.
include/opcode/ChangeLog
* ppc.h (struct powerpc_operand <insert, extract>): Add dialect param.
opcodes/ChangeLog
* ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
(insert_bat, extract_bat, insert_bba, extract_bba,
insert_bd, extract_bd, insert_bdm, extract_bdm,
insert_bdp, extract_bdp, valid_bo,
insert_bo, extract_bo, insert_boe, extract_boe,
insert_ds, extract_ds, insert_de, extract_de,
insert_des, extract_des, insert_li, extract_li,
insert_mbe, extract_mbe, insert_mb6, extract_mb6,
insert_nb, extract_nb, insert_nsi, extract_nsi,
insert_ral, insert_ram, insert_ras,
insert_rbs, extract_rbs, insert_sh6, extract_sh6,
insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
(extract_bd, extract_bdm, extract_bdp,
extract_ds, extract_des,
extract_li, extract_nsi): Implement sign extension without conditional.
(insert_bdm, extract_bdm,
insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
(extract_bdm, extract_bdp): Correct 32 bit validation.
(AT1_MASK, AT2_MASK): Define.
(BBOAT_MASK): Define.
(BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
(BOFM64, BOFP64, BOTM64, BOTP64): Define.
(BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
(PPCCOM32, PPCCOM64): Define.
(powerpc_opcodes): Modify existing 32 bit insns with branch hints
and add new patterns to implement 64 bit branches with hints. Move
booke instructions so they match before ppc64.
* ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
64 bit default targets, and parse "32" and "64" in options.
Formatting fixes.
(print_insn_powerpc): Pass dialect to operand->extract.
2001-11-15 01:08:53 +00:00
418c174284
[gas/ChangeLog]
...
* config/tc-ppc.c (md_parse_option): New -m7410, -m7450 and -m7455
flags, equivalent to -m7400. New -maltivec to enable AltiVec
instructions. New -mbook64 and -mbooke/-mbooke32 flags to enable
64-bit and 32-bit BookE support, respectively. Change -m403 and
-m405 to set PPC403 option.
(md_show_usage): Adjust for new options.
* doc/all.texi: Set PPC.
* doc/as.texinfo: Add PPC support and pull in c-ppc.texi.
* doc/c-ppc.texi: New file.
* doc/Makefile.am (CPU_DOCS): Add c-ppc.texi.
* doc/Makefile.in: Regenerate.
[gas/testsuite/ChangeLog]
* gas/ppc/booke.s: New test for Motorola BookE.
* gas/ppc/booke.d: New file.
* gas/ppc/ppc.exp: Test booke.s.
[include/opcode/ChangeLog]
* ppc.h (PPC_OPCODE_BOOKE, PPC_OPCODE_403): New opcode flags for
BookE and PowerPC403 instructions.
[opcodes/ChangeLog]
* ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
instruction field instruction/extraction functions for new BookE
DE form instructions.
(CT): New macro for CT field in an X form instruction.
(DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
instructions.
(PPC64): Don't include PPC_OPCODE_PPC.
(403): New opcode macro for PPC403 processors.
(BOOKE): New opcode macro for BookE processors.
(bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
(bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
(dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
(stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
(mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
(subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
(subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
(addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
(lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
(stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
(tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
(lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
(stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
(lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
* ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
for a disassembler option of `booke', `booke32' or `booke64' to enable
BookE support in the disassembler.
2001-10-13 01:59:09 +00:00
060d22b0d0
Fix typos in ChangeLogs; fix dates in copyright notices
2001-03-13 22:58:38 +00:00
786e2c0f62
* ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
...
vector unit operands.
(VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
unit instruction formats.
(PPCVEC): New macro, mask for vector instructions.
(powerpc_operands): Add table entries for above operand types.
(powerpc_opcodes): Add table entries for vector instructions.
* ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
(print_insn_little_powerpc): Likewise.
(print_insn_powerpc): Prepend 'v' when printing vector registers.
2000-05-03 22:25:08 +00:00
0d8dfecfe9
More portability patches. Include sysdep.h everywhere.
2000-04-14 04:16:58 +00:00
Alan Modra