ARMv8.3 is an architectural extension of ARMv8. Add the
feature macro and -march=armv8.3-a gas command line option
for the ARM target.
https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions
gas/
* config/tc-arm.c (arm_archs): Add "armv8.3-a".
* doc/c-arm.texi (-march): Add "armv8.3-a".
include/
* opcode/arm.h (ARM_EXT2_V8_3A, ARM_AEXT2_V8_3A): New.
(ARM_ARCH_V8_3A): New.
When the assembler finds an instruction which is part of a higher
opcode architecture it bumps the current opcode architecture. For
example:
$ echo "mwait" | as -bump
{standard input}: Assembler messages:
{standard input}:1: Warning: architecture bumped from "v6" to "v9m" on "mwait"
However, when two instructions pertaining to the same opcode
architecture but associated to different SPARC hardware capabilities
are found in the input stream, and no GAS architecture is specified in
the command line, the assembler bangs:
$ echo "mwait; wr %g0,%g1,%mcdper" | as -bump
{standard input}: Assembler messages:
{standard input}:1: Warning: architecture bumped from "v6" to "v9m" on "mwait"
{standard input}:1: Error: Hardware capability "sparc5" not enabled for "wr".
... and it should'nt, as WRMCDPER pertains to the same architecture
level than MWAIT.
This patch fixes this by extending the definition of sparc opcode
architectures to contain a set of hardware capabilities and making the
assembler to take these capabilities into account when updating the
set of allowed hwcaps when an architecture bump is triggered by some
instruction.
This way, hwcaps associated to architecture levels are maintained in
opcodes, while the assembler keeps the flexibiity of defining GAS
architectures including additional hwcaps (like -Asparcfmaf or the
v8plus* variants).
A test covering this failure case is included.
gas/ChangeLog:
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c: Move HWS_* and HWS2_* definitions to
opcodes/sparc-opc.c.
(sparc_arch): Clarify the new role of the hwcap_allowed and
hwcap2_allowed fields.
(sparc_arch_table): Remove HWS_* and HWS2_* instances from
hwcap_allowed and hwcap2_allowed respectively.
(md_parse_option): Include the opcode arch hwcaps when processing
-A.
(sparc_ip): Use the current opcode arch hwcaps to update
hwcap_allowed, as well of the hwcaps of the instruction triggering
the bump.
* testsuite/gas/sparc/hwcaps-bump.s: New file.
* testsuite/gas/sparc/hwcaps-bump.l: Likewise.
* testsuite/gas/sparc/sparc.exp (gas_64_check): Run tests in
hwcaps-bump.
include/ChangeLog:
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/sparc.h (sparc_opcode_arch): New fields hwcaps and
hwcaps2.
opcodes/ChangeLog:
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (HWS_V8): Definition moved from
gas/config/tc-sparc.c.
(HWS_V9): Likewise.
(HWS_VA): Likewise.
(HWS_VB): Likewise.
(HWS_VC): Likewise.
(HWS_VD): Likewise.
(HWS_VE): Likewise.
(HWS_VV): Likewise.
(HWS_VM): Likewise.
(HWS2_VM): Likewise.
(sparc_opcode_archs): Initialize hwcaps and hwcaps2 fields of
existing entries.
Adds Rust symbol demangler. Rust mangles symbols using GNU_V3 style,
adding a hash and various special character subtitutions. This adds
a new rust style to cplus_demangle and adds 3 helper functions
rust_demangle, rust_demangle_sym and rust_is_mangled.
rust-demangle.c was written by David. Mark did the code formatting to
GNU style and integration into the gcc/libiberty build system and
testsuite.
include/ChangeLog:
2016-11-03 David Tolnay <dtolnay@gmail.com>
Mark Wielaard <mark@klomp.org>
* demangle.h (DMGL_RUST): New macro.
(DMGL_STYLE_MASK): Add DMGL_RUST.
(demangling_styles): Add dlang_rust.
(RUST_DEMANGLING_STYLE_STRING): New macro.
(RUST_DEMANGLING): New macro.
(rust_demangle): New prototype.
(rust_is_mangled): Likewise.
(rust_demangle_sym): Likewise.
libiberty/ChangeLog:
2016-11-03 David Tolnay <dtolnay@gmail.com>
Mark Wielaard <mark@klomp.org>
* Makefile.in (CFILES): Add rust-demangle.c.
(REQUIRED_OFILES): Add rust-demangle.o.
* cplus-dem.c (libiberty_demanglers): Add rust_demangling case.
(cplus_demangle): Handle RUST_DEMANGLING.
(rust_demangle): New function.
* rust-demangle.c: New file.
* testsuite/Makefile.in (really-check): Add check-rust-demangle.
(check-rust-demangle): New rule.
* testsuite/rust-demangle-expected: New file.
Add support for FCMLA and FCADD complex arithmetic SIMD instructions.
FCMLA has an indexed element variant where the index range has to be
treated specially because a complex number takes two elements and the
indexed vector size depends on the other operands.
These complex number SIMD instructions are part of ARMv8.3
https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions
include/
2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_IMM_ROT1,
AARCH64_OPND_IMM_ROT2, AARCH64_OPND_IMM_ROT3.
(enum aarch64_op): Add OP_FCMLA_ELEM.
opcodes/
2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
* aarch64-tbl.h (QL_V3SAMEHSD_ROT, QL_ELEMENT_ROT): Define.
(aarch64_feature_simd_v8_3, SIMD_V8_3): Define.
(aarch64_opcode_table): Add fcmla and fcadd.
(AARCH64_OPERANDS): Add IMM_ROT{1,2,3}.
* aarch64-asm.h (aarch64_ins_imm_rotate): Declare.
* aarch64-asm.c (aarch64_ins_imm_rotate): Define.
* aarch64-dis.h (aarch64_ext_imm_rotate): Declare.
* aarch64-dis.c (aarch64_ext_imm_rotate): Define.
* aarch64-opc.h (enum aarch64_field_kind): Add FLD_rotate{1,2,3}.
* aarch64-opc.c (fields): Add FLD_rotate{1,2,3}.
(operand_general_constraint_met_p): Rotate and index range check.
(aarch64_print_operand): Handle rotate operand.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
gas/
2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_IMM_ROT*.
* testsuite/gas/aarch64/advsimd-armv8_3.d: New.
* testsuite/gas/aarch64/advsimd-armv8_3.s: New.
* testsuite/gas/aarch64/illegal-fcmla.s: New.
* testsuite/gas/aarch64/illegal-fcmla.l: New.
* testsuite/gas/aarch64/illegal-fcmla.d: New.
ARMv8.3 can be selected with -march=armv8.3-a command line option.
An overview of the ARMv8.3 architecture extension is at
https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions
gas/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/tc-aarch64.c (aarch64_archs): Add "armv8.3-a".
* doc/c-aarch64.texi (-march): Likewise.
include/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_3): Define.
(AARCH64_ARCH_V8_3): Define.
(AARCH64_ARCH_V8_1, AARCH64_ARCH_V8_2): Simplify.
2016-11-04 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (cortex-m33): Declare new processor.
* doc/c-arm.texi (-mcpu ARM command line option): Document new
Cortex-M33 processor.
* NEWS: Mention ARM Cortex-M33 support.
The current handling for arc instructions longer than 32-bits is all
handled as a special case in both the assembler and disassembler.
The problem with this approach is that it leads to code duplication,
selecting a long instruction is exactly the same process as selecting a
short instruction, except over more bits, in both cases we select based
on bit comparison, and initial operand insertion and extraction.
This commit unifies both the long and short instruction worlds,
converting the core opcodes library from being largely 32-bit focused,
to being largely 64-bit focused.
The changes are, on the whole, not too much. There's obviously a lot of
type changes but otherwise the bulk of the code just works. Most of the
actual functional changes are to code that previously handled the longer
48 or 64 bit instructions. The insert/extract handlers for these have
now been brought into line with the short instruction insert/extract
handlers.
All of the special case handling code that was previously added has now
been removed again. Overall, this commit reduces the amount of code in
the arc assembler and disassembler.
gas/ChangeLog:
* config/tc-arc.c (struct arc_insn): Change type of insn field.
(md_number_to_chars_midend): Support 6- and 8-byte values.
(emit_insn0): Update debug output.
(find_opcode_match): Likewise.
(build_fake_opcode_hash_entry): Delete.
(find_special_case_long_opcode): Delete.
(find_special_case): Remove long format special case handling.
(insert_operand): Change instruction type and update debug print
format.
(assemble_insn): Change instruction type, update debug print
formats, and remove unneeded assert.
include/ChangeLog:
* opcode/arc.h (struct arc_opcode): Change type of opcode and mask
fields.
(struct arc_long_opcode): Delete.
(struct arc_operand): Change types for insert and extract
handlers.
opcodes/ChangeLog:
* arc-dis.c (struct arc_operand_iterator): Remove all fields
relating to long instruction processing, add new limm field.
(OPCODE): Rename to...
(OPCODE_32BIT_INSN): ...this.
(OPCODE_AC): Delete.
(skip_this_opcode): Handle different instruction lengths, update
macro name.
(special_flag_p): Update parameter type.
(find_format_from_table): Update for more instruction lengths.
(find_format_long_instructions): Delete.
(find_format): Update for more instruction lengths.
(arc_insn_length): Likewise.
(extract_operand_value): Update for more instruction lengths.
(operand_iterator_next): Remove code relating to long
instructions.
(arc_opcode_to_insn_type): New function.
(print_insn_arc):Update for more instructions lengths.
* arc-ext.c (extInstruction_t): Change argument type.
* arc-ext.h (extInstruction_t): Change argument type.
* arc-fxi.h: Change type unsigned to unsigned long long
extensively throughout.
* arc-nps400-tbl.h: Add long instructions taken from
arc_long_opcodes table in arc-opc.c.
* arc-opc.c: Update parameter types on insert/extract handlers.
(arc_long_opcodes): Delete.
(arc_num_long_opcodes): Delete.
(arc_opcode_len): Update for more instruction lengths.
In preparation to moving to a world where arc instructions can be 2, 4,
6, or 8 bytes long, make some macros 64-bit safe.
There should be no functional change after this commit.
include/ChangeLog:
* opcode/arc.h: Make macros 64-bit safe.
In preparation for moving to a world where arc instructions can be 2, 4,
6, or 8 bytes in length, replace the ARC_SHORT macro (which is either
true of false) with an arc_opcode_len function that returns a length in
bytes.
There should be no functional change after this commit.
gas/ChangeLog:
* config/tc-arc.c (assemble_insn): Replace use of ARC_SHORT with
arc_opcode_len.
include/ChangeLog:
* opcode/arc.h (arc_opcode_len): Declare.
(ARC_SHORT): Delete.
opcodes/ChangeLog:
* arc-dis.c (find_format_from_table): Replace use of ARC_SHORT
with arc_opcode_len.
(find_format_long_instructions): Likewise.
* arc-opc.c (arc_opcode_len): New function.
So that GDB and other projects that share the top level can use them.
Bootstrapped with all default languages + jit on x86-64 Fedora 23.
gcc/ChangeLog:
2016-10-14 Pedro Alves <palves@redhat.com>
* coretypes.h (OVERRIDE, FINAL): Delete, moved to
include/ansidecl.h.
include/ChangeLog:
2016-10-14 Pedro Alves <palves@redhat.com>
* ansidecl.h (GCC_FINAL): Delete.
(OVERRIDE, FINAL): New, moved from gcc/coretypes.h.
The ARC (short) instructions are using a special register number to
indicate is the instruction uses a long immediate (LIMM). In the case
of short instruction, this LIMM indicator depends on the ISA version
used. Thus, for ARCv1 processors, the LIMM indicator is 0x3E, the same
value used in "long" instructions. However, for the ARCv2 processors,
this LIMM indicator is 0x1E.
This patch fixes the LIMM detection for ARCv1 ISA and adds two tests.
gas/
2016-10-13 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/shortlimm_a7.d: New file.
* testsuite/gas/arc/shortlimm_a7.s: Likewise.
* testsuite/gas/arc/shortlimm_hs.d: Likewise.
* testsuite/gas/arc/shortlimm_hs.s: Likewise.
include/
2016-10-13 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (ARC_OPCODE_ARCV2): New define.
opcodes/
2016-10-13 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (find_format_from_table): Discriminate LIMM indicator
usage on ISA basis.
cmp[l][o] get an optional L field only when generating 32-bit code.
dcbf, tlbie and tlbiel keep their optional L field, ditto for R field
of tbegin. cmprb, tsr., wlcr[all] and mtsle all change to a
compulsory L field.
L field of dcbf and wclr is 2 bits.
PR 20641
include/
* opcode/ppc.h (PPC_OPERAND_OPTIONAL32): Define.
opcodes/
* ppc-opc.c (L): Make compulsory.
(LOPT): New, optional form of L.
(HTM_R): Define as LOPT.
(L0, L1): Delete.
(L32OPT): New, optional for 32-bit L.
(L2OPT): New, 2-bit L for dcbf.
(SVC_LEC): Update.
(L2): Define.
(insert_l0, extract_l0, insert_l1, extract_l2): Delete.
(powerpc_opcodes <cmpli, cmpi, cmpl, cmp>): Use L32OPT.
<dcbf>: Use L2OPT.
<tlbiel, tlbie>: Use LOPT.
<wclr, wclrall>: Use L2.
gas/
* config/tc-ppc.c (md_assemble): Handle PPC_OPERAND_OPTIONAL32.
* testsuite/gas/ppc/power8.s: Provide tbegin. operand.
* testsuite/gas/ppc/power9.d: Update cmprb disassembly.
This patch extends Tag_GNU_Power_ABI_FP to cover long double ABIs,
makes the assembler warn about undefined tag values, and removes
similar warnings from the linker. I think it is better to not
warn in the linker about undefined tag values as future extensions to
the tags then won't result in likely bogus warnings. This is
consistent with the fact that an older linker won't warn on an
entirely new tag.
include/
* elf/ppc.h (Tag_GNU_Power_ABI_FP): Comment.
bfd/
* elf-bfd.h (_bfd_elf_ppc_merge_fp_attributes): Declare.
* elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): New function.
(ppc_elf_merge_obj_attributes): Use it. Don't copy first file
attributes, merge them. Don't warn about undefined tag bits,
or copy unknown values to output.
* elf64-ppc.c (ppc64_elf_merge_private_bfd_data): Call
_bfd_elf_ppc_merge_fp_attributes.
binutils/
* readelf.c (display_power_gnu_attribute): Catch truncated section
for all powerpc attributes. Display long double ABI. Don't
capitalize words, except for names. Show known bits of tag values
when some unknown bits are present. Whitespace fixes.
gas/
* config/tc-ppc.c (ppc_elf_gnu_attribute): New function.
(md_pseudo_table <ELF>): Handle "gnu_attribute".
ld/
* testsuite/ld-powerpc/attr-gnu-4-4.s: Delete.
* testsuite/ld-powerpc/attr-gnu-4-14.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-24.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-34.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-41.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-32.d: Adjust expected warning.
* testsuite/ld-powerpc/attr-gnu-8-23.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-01.d: Adjust expected output.
* testsuite/ld-powerpc/attr-gnu-4-02.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-03.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-10.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-11.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-20.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-22.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-33.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-8-11.d: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Don't run deleted tests.
SVE defines new names for existing NZCV conditions, to reflect the
result of instructions like PTEST. This patch adds support for these
names.
The patch also adds comments to the disassembly output to show the
alternative names of a condition code. For example:
cinv x0, x1, cc
becomes:
cinv x0, x1, cc // cc = lo, ul, last
and:
b.cc f0 <...>
becomes:
b.cc f0 <...> // b.lo, b.ul, b.last
Doing this for the SVE names follows the practice recommended by the
SVE specification and is definitely useful when reading SVE code.
If the feeling is that it's too distracting elsewhere, we could add
an option to turn it off.
include/
* opcode/aarch64.h (aarch64_cond): Bump array size to 4.
opcodes/
* aarch64-dis.c (remove_dot_suffix): New function, split out from...
(print_mnemonic_name): ...here.
(print_comment): New function.
(print_aarch64_insn): Call it.
* aarch64-opc.c (aarch64_conds): Add SVE names.
(aarch64_print_operand): Print alternative condition names in
a comment.
gas/
* config/tc-aarch64.c (opcode_lookup): Search for the end of
a condition name, rather than assuming that it will have exactly
2 characters.
(parse_operands): Likewise.
* testsuite/gas/aarch64/alias.d: Add new condition-code comments
to the expected output.
* testsuite/gas/aarch64/beq_1.d: Likewise.
* testsuite/gas/aarch64/float-fp16.d: Likewise.
* testsuite/gas/aarch64/int-insns.d: Likewise.
* testsuite/gas/aarch64/no-aliases.d: Likewise.
* testsuite/gas/aarch64/programmer-friendly.d: Likewise.
* testsuite/gas/aarch64/reloc-insn.d: Likewise.
* testsuite/gas/aarch64/b_c_1.d, testsuite/gas/aarch64/b_c_1.s:
New test.
ld/
* testsuite/ld-aarch64/emit-relocs-280.d: Match branch comments.
* testsuite/ld-aarch64/weak-undefined.d: Likewise.
The main purpose of the SVE aarch64_insn_classes is to describe how
an index into an aarch64_opnd_qualifier_seq_t is represented in the
instruction encoding. Other instructions usually use flags for this
information, but (a) we're running out of those and (b) the iclass
would otherwise be unused for SVE.
include/
* opcode/aarch64.h (sve_cpy, sve_index, sve_limm, sve_misc)
(sve_movprfx, sve_pred_zm, sve_shift_pred, sve_shift_unpred)
(sve_size_bhs, sve_size_bhsd, sve_size_hsd, sve_size_sd): New
aarch64_insn_classes.
opcodes/
* aarch64-opc.h (FLD_SVE_M_4, FLD_SVE_M_14, FLD_SVE_M_16)
(FLD_SVE_sz, FLD_SVE_tsz, FLD_SVE_tszl_8, FLD_SVE_tszl_19): New
aarch64_field_kinds.
* aarch64-opc.c (fields): Add corresponding entries.
* aarch64-asm.c (aarch64_get_variant): New function.
(aarch64_encode_variant_using_iclass): Likewise.
(aarch64_opcode_encode): Call it.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): New function.
(aarch64_opcode_decode): Call it.
SVE uses some new fields to store W, X and scalar FP registers.
This patch adds corresponding operands.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_Rm): New aarch64_opnd.
(AARCH64_OPND_SVE_Rn_SP, AARCH64_OPND_SVE_VZn, AARCH64_OPND_SVE_Vd)
(AARCH64_OPND_SVE_Vm, AARCH64_OPND_SVE_Vn): Likewise.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE core
and FP register operands.
* aarch64-opc.h (FLD_SVE_Rm, FLD_SVE_Rn, FLD_SVE_Vd, FLD_SVE_Vm)
(FLD_SVE_Vn): New aarch64_field_kinds.
* aarch64-opc.c (fields): Add corresponding entries.
(aarch64_print_operand): Handle the new SVE core and FP register
operands.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm-2.c: Likewise.
* aarch64-dis-2.c: Likewise.
gas/
* config/tc-aarch64.c (parse_operands): Handle the new SVE core
and FP register operands.
This patch adds support for the new SVE floating-point immediate
operands. One operand uses the same 8-bit encoding as base AArch64,
but in a different position. The others use a single bit to select
between two values.
One of the single-bit operands is a choice between 0 and 1, where 0
is not a valid 8-bit encoding. I think the cleanest way of handling
these single-bit immediates is therefore to use the IEEE float encoding
itself as the immediate value and select between the two possible values
when encoding and decoding.
As described in the covering note for the patch that added F_STRICT,
we get better error messages by accepting unsuffixed vector registers
and leaving the qualifier matching code to report an error. This means
that we carry on parsing the other operands, and so can try to parse FP
immediates for invalid instructions like:
fcpy z0, #2.5
In this case there is no suffix to tell us whether the immediate should
be treated as single or double precision. Again, we get better error
messages by picking one (arbitrary) immediate size and reporting an error
for the missing suffix later.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_FPIMM8): New aarch64_opnd.
(AARCH64_OPND_SVE_I1_HALF_ONE, AARCH64_OPND_SVE_I1_HALF_TWO)
(AARCH64_OPND_SVE_I1_ZERO_ONE): Likewise.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE FP
immediate operands.
* aarch64-opc.h (FLD_SVE_i1): New aarch64_field_kind.
* aarch64-opc.c (fields): Add corresponding entry.
(operand_general_constraint_met_p): Handle the new SVE FP immediate
operands.
(aarch64_print_operand): Likewise.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_float_half_one, ins_sve_float_half_two)
(ins_sve_float_zero_one): New inserters.
* aarch64-asm.c (aarch64_ins_sve_float_half_one): New function.
(aarch64_ins_sve_float_half_two): Likewise.
(aarch64_ins_sve_float_zero_one): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_float_half_one, ext_sve_float_half_two)
(ext_sve_float_zero_one): New extractors.
* aarch64-dis.c (aarch64_ext_sve_float_half_one): New function.
(aarch64_ext_sve_float_half_two): Likewise.
(aarch64_ext_sve_float_zero_one): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (double_precision_operand_p): New function.
(parse_operands): Use it to calculate the dp_p input to
parse_aarch64_imm_float. Handle the new SVE FP immediate operands.
This patch adds the new SVE integer immediate operands. There are
three kinds:
- simple signed and unsigned ranges, but with new widths and positions.
- 13-bit logical immediates. These have the same form as in base AArch64,
but at a different bit position.
In the case of the "MOV Zn.<T>, #<limm>" alias of DUPM, the logical
immediate <limm> is not allowed to be a valid DUP immediate, since DUP
is preferred over DUPM for constants that both instructions can handle.
- a new 9-bit arithmetic immediate, of the form "<imm8>{, LSL #8}".
In some contexts the operand is signed and in others it's unsigned.
As an extension, we allow shifted immediates to be written as a single
integer, e.g. "#256" is equivalent to "#1, LSL #8". We also use the
shiftless form as the preferred disassembly, except for the special
case of "#0, LSL #8" (a redundant encoding of 0).
include/
* opcode/aarch64.h (AARCH64_OPND_SIMM5): New aarch64_opnd.
(AARCH64_OPND_SVE_AIMM, AARCH64_OPND_SVE_ASIMM)
(AARCH64_OPND_SVE_INV_LIMM, AARCH64_OPND_SVE_LIMM)
(AARCH64_OPND_SVE_LIMM_MOV, AARCH64_OPND_SVE_SHLIMM_PRED)
(AARCH64_OPND_SVE_SHLIMM_UNPRED, AARCH64_OPND_SVE_SHRIMM_PRED)
(AARCH64_OPND_SVE_SHRIMM_UNPRED, AARCH64_OPND_SVE_SIMM5)
(AARCH64_OPND_SVE_SIMM5B, AARCH64_OPND_SVE_SIMM6)
(AARCH64_OPND_SVE_SIMM8, AARCH64_OPND_SVE_UIMM3)
(AARCH64_OPND_SVE_UIMM7, AARCH64_OPND_SVE_UIMM8)
(AARCH64_OPND_SVE_UIMM8_53): Likewise.
(aarch64_sve_dupm_mov_immediate_p): Declare.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE
integer immediate operands.
* aarch64-opc.h (FLD_SVE_immN, FLD_SVE_imm3, FLD_SVE_imm5)
(FLD_SVE_imm5b, FLD_SVE_imm7, FLD_SVE_imm8, FLD_SVE_imm9)
(FLD_SVE_immr, FLD_SVE_imms, FLD_SVE_tszh): New aarch64_field_kinds.
* aarch64-opc.c (fields): Add corresponding entries.
(operand_general_constraint_met_p): Handle the new SVE integer
immediate operands.
(aarch64_print_operand): Likewise.
(aarch64_sve_dupm_mov_immediate_p): New function.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_inv_limm, ins_sve_aimm, ins_sve_asimm)
(ins_sve_limm_mov, ins_sve_shlimm, ins_sve_shrimm): New inserters.
* aarch64-asm.c (aarch64_ins_limm_1): New function, split out from...
(aarch64_ins_limm): ...here.
(aarch64_ins_inv_limm): New function.
(aarch64_ins_sve_aimm): Likewise.
(aarch64_ins_sve_asimm): Likewise.
(aarch64_ins_sve_limm_mov): Likewise.
(aarch64_ins_sve_shlimm): Likewise.
(aarch64_ins_sve_shrimm): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_inv_limm, ext_sve_aimm, ext_sve_asimm)
(ext_sve_limm_mov, ext_sve_shlimm, ext_sve_shrimm): New extractors.
* aarch64-dis.c (decode_limm): New function, split out from...
(aarch64_ext_limm): ...here.
(aarch64_ext_inv_limm): New function.
(decode_sve_aimm): Likewise.
(aarch64_ext_sve_aimm): Likewise.
(aarch64_ext_sve_asimm): Likewise.
(aarch64_ext_sve_limm_mov): Likewise.
(aarch64_top_bit): Likewise.
(aarch64_ext_sve_shlimm): Likewise.
(aarch64_ext_sve_shrimm): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (parse_operands): Handle the new SVE integer
immediate operands.
This patch adds support for addresses of the form:
[<base>, #<offset>, MUL VL]
This involves adding a new AARCH64_MOD_MUL_VL modifier, which is
why I split it out from the other addressing modes.
For LD2, LD3 and LD4, the offset must be a multiple of the structure
size, so for LD3 the possible values are 0, 3, 6, .... The patch
therefore extends value_aligned_p to handle non-power-of-2 alignments.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_S4xVL): New aarch64_opnd.
(AARCH64_OPND_SVE_ADDR_RI_S4x2xVL, AARCH64_OPND_SVE_ADDR_RI_S4x3xVL)
(AARCH64_OPND_SVE_ADDR_RI_S4x4xVL, AARCH64_OPND_SVE_ADDR_RI_S6xVL)
(AARCH64_OPND_SVE_ADDR_RI_S9xVL): Likewise.
(AARCH64_MOD_MUL_VL): New aarch64_modifier_kind.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for new MUL VL
operands.
* aarch64-opc.c (aarch64_operand_modifiers): Initialize
the AARCH64_MOD_MUL_VL entry.
(value_aligned_p): Cope with non-power-of-two alignments.
(operand_general_constraint_met_p): Handle the new MUL VL addresses.
(print_immediate_offset_address): Likewise.
(aarch64_print_operand): Likewise.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_addr_ri_s4xvl, ins_sve_addr_ri_s6xvl)
(ins_sve_addr_ri_s9xvl): New inserters.
* aarch64-asm.c (aarch64_ins_sve_addr_ri_s4xvl): New function.
(aarch64_ins_sve_addr_ri_s6xvl): Likewise.
(aarch64_ins_sve_addr_ri_s9xvl): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_addr_ri_s4xvl, ext_sve_addr_ri_s6xvl)
(ext_sve_addr_ri_s9xvl): New extractors.
* aarch64-dis.c (aarch64_ext_sve_addr_reg_mul_vl): New function.
(aarch64_ext_sve_addr_ri_s4xvl): Likewise.
(aarch64_ext_sve_addr_ri_s6xvl): Likewise.
(aarch64_ext_sve_addr_ri_s9xvl): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (SHIFTED_NONE, SHIFTED_MUL_VL): New
parse_shift_modes.
(parse_shift): Handle SHIFTED_MUL_VL.
(parse_address_main): Add an imm_shift_mode parameter.
(parse_address, parse_sve_address): Update accordingly.
(parse_operands): Handle MUL VL addressing modes.
This patch adds most of the new SVE addressing modes and associated
operands. A follow-on patch adds MUL VL, since handling it separately
makes the changes easier to read.
The patch also introduces a new "operand-dependent data" field to the
operand flags, based closely on the existing one for opcode flags.
For SVE this new field needs only 2 bits, but it could be widened
in future if necessary.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_U6): New aarch64_opnd.
(AARCH64_OPND_SVE_ADDR_RI_U6x2, AARCH64_OPND_SVE_ADDR_RI_U6x4)
(AARCH64_OPND_SVE_ADDR_RI_U6x8, AARCH64_OPND_SVE_ADDR_RR)
(AARCH64_OPND_SVE_ADDR_RR_LSL1, AARCH64_OPND_SVE_ADDR_RR_LSL2)
(AARCH64_OPND_SVE_ADDR_RR_LSL3, AARCH64_OPND_SVE_ADDR_RX)
(AARCH64_OPND_SVE_ADDR_RX_LSL1, AARCH64_OPND_SVE_ADDR_RX_LSL2)
(AARCH64_OPND_SVE_ADDR_RX_LSL3, AARCH64_OPND_SVE_ADDR_RZ)
(AARCH64_OPND_SVE_ADDR_RZ_LSL1, AARCH64_OPND_SVE_ADDR_RZ_LSL2)
(AARCH64_OPND_SVE_ADDR_RZ_LSL3, AARCH64_OPND_SVE_ADDR_RZ_XTW_14)
(AARCH64_OPND_SVE_ADDR_RZ_XTW_22, AARCH64_OPND_SVE_ADDR_RZ_XTW1_14)
(AARCH64_OPND_SVE_ADDR_RZ_XTW1_22, AARCH64_OPND_SVE_ADDR_RZ_XTW2_14)
(AARCH64_OPND_SVE_ADDR_RZ_XTW2_22, AARCH64_OPND_SVE_ADDR_RZ_XTW3_14)
(AARCH64_OPND_SVE_ADDR_RZ_XTW3_22, AARCH64_OPND_SVE_ADDR_ZI_U5)
(AARCH64_OPND_SVE_ADDR_ZI_U5x2, AARCH64_OPND_SVE_ADDR_ZI_U5x4)
(AARCH64_OPND_SVE_ADDR_ZI_U5x8, AARCH64_OPND_SVE_ADDR_ZZ_LSL)
(AARCH64_OPND_SVE_ADDR_ZZ_SXTW, AARCH64_OPND_SVE_ADDR_ZZ_UXTW):
Likewise.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE
address operands.
* aarch64-opc.h (FLD_SVE_imm6, FLD_SVE_msz, FLD_SVE_xs_14)
(FLD_SVE_xs_22): New aarch64_field_kinds.
(OPD_F_OD_MASK, OPD_F_OD_LSB, OPD_F_NO_ZR): New flags.
(get_operand_specific_data): New function.
* aarch64-opc.c (fields): Add entries for FLD_SVE_imm6, FLD_SVE_msz,
FLD_SVE_xs_14 and FLD_SVE_xs_22.
(operand_general_constraint_met_p): Handle the new SVE address
operands.
(sve_reg): New array.
(get_addr_sve_reg_name): New function.
(aarch64_print_operand): Handle the new SVE address operands.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_addr_ri_u6, ins_sve_addr_rr_lsl)
(ins_sve_addr_rz_xtw, ins_sve_addr_zi_u5, ins_sve_addr_zz_lsl)
(ins_sve_addr_zz_sxtw, ins_sve_addr_zz_uxtw): New inserters.
* aarch64-asm.c (aarch64_ins_sve_addr_ri_u6): New function.
(aarch64_ins_sve_addr_rr_lsl): Likewise.
(aarch64_ins_sve_addr_rz_xtw): Likewise.
(aarch64_ins_sve_addr_zi_u5): Likewise.
(aarch64_ins_sve_addr_zz): Likewise.
(aarch64_ins_sve_addr_zz_lsl): Likewise.
(aarch64_ins_sve_addr_zz_sxtw): Likewise.
(aarch64_ins_sve_addr_zz_uxtw): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_addr_ri_u6, ext_sve_addr_rr_lsl)
(ext_sve_addr_rz_xtw, ext_sve_addr_zi_u5, ext_sve_addr_zz_lsl)
(ext_sve_addr_zz_sxtw, ext_sve_addr_zz_uxtw): New extractors.
* aarch64-dis.c (aarch64_ext_sve_add_reg_imm): New function.
(aarch64_ext_sve_addr_ri_u6): Likewise.
(aarch64_ext_sve_addr_rr_lsl): Likewise.
(aarch64_ext_sve_addr_rz_xtw): Likewise.
(aarch64_ext_sve_addr_zi_u5): Likewise.
(aarch64_ext_sve_addr_zz): Likewise.
(aarch64_ext_sve_addr_zz_lsl): Likewise.
(aarch64_ext_sve_addr_zz_sxtw): Likewise.
(aarch64_ext_sve_addr_zz_uxtw): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (REG_TYPE_SVE_BASE, REG_TYPE_SVE_OFFSET): New
register types.
(get_reg_expected_msg): Handle them.
(aarch64_addr_reg_parse): New function, split out from
aarch64_reg_parse_32_64. Handle Z registers too.
(aarch64_reg_parse_32_64): Call it.
(parse_address_main): Add base_qualifier, offset_qualifier,
base_type and offset_type parameters. Handle SVE base and offset
registers.
(parse_address): Update call to parse_address_main.
(parse_sve_address): New function.
(parse_operands): Parse the new SVE address operands.
Some SVE instructions count the number of elements in a given vector
pattern and allow a scale factor of [1, 16] to be applied to the result.
This scale factor is written ", MUL #n", where "MUL" is a new operator.
E.g.:
UQINCD X0, POW2, MUL #2
This patch adds support for this kind of operand.
All existing operators were shifts of some kind, so there was a natural
range of [0, 63] regardless of context. This was then narrowered further
by later checks (e.g. to [0, 31] when used for 32-bit values).
In contrast, MUL doesn't really have a natural context-independent range.
Rather than pick one arbitrarily, it seemed better to make the "shift"
amount a full 64-bit value and leave the range test to the usual
operand-checking code. I've rearranged the fields of aarch64_opnd_info
so that this doesn't increase the size of the structure (although I don't
think its size is critical anyway).
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_PATTERN_SCALED): New
aarch64_opnd.
(AARCH64_MOD_MUL): New aarch64_modifier_kind.
(aarch64_opnd_info): Make shifter.amount an int64_t and
rearrange the fields.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add an entry for
AARCH64_OPND_SVE_PATTERN_SCALED.
* aarch64-opc.h (FLD_SVE_imm4): New aarch64_field_kind.
* aarch64-opc.c (fields): Add a corresponding entry.
(set_multiplier_out_of_range_error): New function.
(aarch64_operand_modifiers): Add entry for AARCH64_MOD_MUL.
(operand_general_constraint_met_p): Handle
AARCH64_OPND_SVE_PATTERN_SCALED.
(print_register_offset_address): Use PRIi64 to print the
shift amount.
(aarch64_print_operand): Likewise. Handle
AARCH64_OPND_SVE_PATTERN_SCALED.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_scale): New inserter.
* aarch64-asm.c (aarch64_ins_sve_scale): New function.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_scale): New inserter.
* aarch64-dis.c (aarch64_ext_sve_scale): New function.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (SHIFTED_MUL): New parse_shift_mode.
(parse_shift): Handle it. Reject AARCH64_MOD_MUL for all other
shift modes. Skip range tests for AARCH64_MOD_MUL.
(process_omitted_operand): Handle AARCH64_OPND_SVE_PATTERN_SCALED.
(parse_operands): Likewise.
The SVE instructions have two enumerated operands: one to select a
vector pattern and another to select a prefetch operation. The latter
is a cut-down version of the base AArch64 prefetch operation.
Both types of operand can also be specified as raw enum values such as #31.
Reserved values can only be specified this way.
If it hadn't been for the pattern operand, I would have been tempted
to use the existing parsing for prefetch operations and add extra
checks for SVE. However, since the patterns needed new enum parsing
code anyway, it seeemed cleaner to reuse it for the prefetches too.
Because of the small number of enum values, I don't think we'd gain
anything by using hash tables.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_PATTERN): New aarch64_opnd.
(AARCH64_OPND_SVE_PRFOP): Likewise.
(aarch64_sve_pattern_array): Declare.
(aarch64_sve_prfop_array): Likewise.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for
AARCH64_OPND_SVE_PATTERN and AARCH64_OPND_SVE_PRFOP.
* aarch64-opc.h (FLD_SVE_pattern): New aarch64_field_kind.
(FLD_SVE_prfop): Likewise.
* aarch64-opc.c: Include libiberty.h.
(aarch64_sve_pattern_array): New variable.
(aarch64_sve_prfop_array): Likewise.
(fields): Add entries for FLD_SVE_pattern and FLD_SVE_prfop.
(aarch64_print_operand): Handle AARCH64_OPND_SVE_PATTERN and
AARCH64_OPND_SVE_PRFOP.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
gas/
* config/tc-aarch64.c (parse_enum_string): New function.
(po_enum_or_fail): New macro.
(parse_operands): Handle AARCH64_OPND_SVE_PATTERN and
AARCH64_OPND_SVE_PRFOP.
This patch adds qualifiers to represent /z and /m suffixes on
predicate registers.
include/
* opcode/aarch64.h (AARCH64_OPND_QLF_P_Z): New aarch64_opnd_qualifier.
(AARCH64_OPND_QLF_P_M): Likewise.
opcodes/
* aarch64-opc.c (aarch64_opnd_qualifiers): Add entries for
AARCH64_OPND_QLF_P_[ZM].
(aarch64_print_operand): Print /z and /m where appropriate.
gas/
* config/tc-aarch64.c (vector_el_type): Add NT_zero and NT_merge.
(parse_vector_type_for_operand): Assert that the skipped character
is a '.'.
(parse_predication_for_operand): New function.
(parse_typed_reg): Parse /z and /m suffixes for predicate registers.
(vectype_to_qualifier): Handle NT_zero and NT_merge.
This patch adds the Zn and Pn registers, and associated fields and
operands.
include/
* opcode/aarch64.h (AARCH64_OPND_CLASS_SVE_REG): New
aarch64_operand_class.
(AARCH64_OPND_CLASS_PRED_REG): Likewise.
(AARCH64_OPND_SVE_Pd, AARCH64_OPND_SVE_Pg3, AARCH64_OPND_SVE_Pg4_5)
(AARCH64_OPND_SVE_Pg4_10, AARCH64_OPND_SVE_Pg4_16)
(AARCH64_OPND_SVE_Pm, AARCH64_OPND_SVE_Pn, AARCH64_OPND_SVE_Pt)
(AARCH64_OPND_SVE_Za_5, AARCH64_OPND_SVE_Za_16, AARCH64_OPND_SVE_Zd)
(AARCH64_OPND_SVE_Zm_5, AARCH64_OPND_SVE_Zm_16, AARCH64_OPND_SVE_Zn)
(AARCH64_OPND_SVE_Zn_INDEX, AARCH64_OPND_SVE_ZnxN)
(AARCH64_OPND_SVE_Zt, AARCH64_OPND_SVE_ZtxN): New aarch64_opnds.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for new SVE operands.
* aarch64-opc.h (FLD_SVE_Pd, FLD_SVE_Pg3, FLD_SVE_Pg4_5)
(FLD_SVE_Pg4_10, FLD_SVE_Pg4_16, FLD_SVE_Pm, FLD_SVE_Pn, FLD_SVE_Pt)
(FLD_SVE_Za_5, FLD_SVE_Za_16, FLD_SVE_Zd, FLD_SVE_Zm_5, FLD_SVE_Zm_16)
(FLD_SVE_Zn, FLD_SVE_Zt, FLD_SVE_tzsh): New aarch64_field_kinds.
* aarch64-opc.c (fields): Add corresponding entries here.
(operand_general_constraint_met_p): Check that SVE register lists
have the correct length. Check the ranges of SVE index registers.
Check for cases where p8-p15 are used in 3-bit predicate fields.
(aarch64_print_operand): Handle the new SVE operands.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_index, ins_sve_reglist): New inserters.
* aarch64-asm.c (aarch64_ins_sve_index): New function.
(aarch64_ins_sve_reglist): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_index, ext_sve_reglist): New extractors.
* aarch64-dis.c (aarch64_ext_sve_index): New function.
(aarch64_ext_sve_reglist): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (NTA_HASVARWIDTH): New macro.
(AARCH64_REG_TYPES): Add ZN and PN.
(get_reg_expected_msg): Handle them.
(parse_vector_type_for_operand): Add a reg_type parameter.
Skip the width for Zn and Pn registers.
(parse_typed_reg): Extend vector handling to Zn and Pn. Update the
call to parse_vector_type_for_operand. Set HASVARTYPE for Zn and Pn,
expecting the width to be 0.
(parse_vector_reg_list): Restrict error about [BHSD]nn operands to
REG_TYPE_VN.
(vectype_to_qualifier): Use S_[BHSD] qualifiers for NTA_HASVARWIDTH.
(parse_operands): Handle the new Zn and Pn operands.
(REGSET16): New macro, split out from...
(REGSET31): ...here.
(reg_names): Add Zn and Pn entries.
SVE has some instructions in which the same register appears twice
in the assembly string, once as an input and once as an output.
This patch adds a general mechanism for that.
The patch needs to add new information to the instruction entries.
One option would have been to extend the flags field of the opcode
to 64 bits (since we already rely on 64-bit integers being available
on the host). However, the *_INSN macros mean that it's easy to add
new information as top-level fields without affecting the existing
table entries too much. Going for that option seemed to give slightly
neater code.
include/
* opcode/aarch64.h (aarch64_opcode): Add a tied_operand field.
(AARCH64_OPDE_UNTIED_OPERAND): New aarch64_operand_error_kind.
opcodes/
* aarch64-tbl.h (CORE_INSN, __FP_INSN, SIMD_INSN, CRYP_INSN)
(_CRC_INSN, _LSE_INSN, _LOR_INSN, RDMA_INSN, FP16_INSN, SF16_INSN)
(V8_2_INSN, aarch64_opcode_table): Initialize tied_operand field.
* aarch64-opc.c (aarch64_match_operands_constraint): Check for
tied operands.
gas/
* config/tc-aarch64.c (output_operand_error_record): Handle
AARCH64_OPDE_UNTIED_OPERAND.
SVE predicate operands can appear in three forms:
1. unsuffixed: "Pn"
2. with a predication type: "Pn/[ZM]"
3. with a size suffix: "Pn.[BHSD]"
No variation is allowed: unsuffixed operands cannot have a (redundant)
suffix, and the suffixes can never be dropped. Unsuffixed Pn are used
in LDR and STR, but they are also used for Pg operands in cases where
the result is scalar and where there is therefore no choice to be made
between "merging" and "zeroing". This means that some Pg operands have
suffixes and others don't.
It would be possible to use context-sensitive parsing to handle
this difference. The tc-aarch64.c code would then raise an error
if the wrong kind of suffix is used for a particular instruction.
However, we get much more user-friendly error messages if we parse
all three forms for all SVE instructions and record the suffix as a
qualifier. The normal qualifier matching code can then report cases
where the wrong kind of suffix is used. This is a slight extension
of existing usage, which really only checks for the wrong choice of
suffix within a particular kind of suffix.
The only catch is a that a "NIL" entry in the qualifier list
specifically means "no suffix should be present" (case 1 above).
NIL isn't a wildcard here. It also means that an instruction that
requires all-NIL qualifiers can fail to match (because a suffix was
supplied when it shouldn't have been); this requires a slight change
to find_best_match.
This patch adds an F_STRICT flag to select this behaviour.
The flag will be set for all SVE instructions. The behaviour
for other instructions doesn't change.
include/
* opcode/aarch64.h (F_STRICT): New flag.
opcodes/
* aarch64-opc.c (match_operands_qualifier): Handle F_STRICT.
gas/
* config/tc-aarch64.c (find_best_match): Simplify, allowing an
instruction with all-NIL qualifiers to fail to match.
2016-09-07 Richard Earnshaw <rearnsha@arm.com>
* opcode/arm.h (ARM_ARCH_V8A_CRC): New architecture.
2016-09-07 Richard Earnshaw <rearnsha@arm.com>
* config/tc-arm.c ((arm_cpus): Use ARM_ARCH_V8A_CRC for all
ARMv8-A CPUs except xgene1.
Added support for ARC_SDA_12 reloc.
Fixed ARC_N32_ME.
Added ME (middle-endian) to ARC_SDA_12 reloc.
bfd/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* reloc.c: Fixed type in ARC_SECTOFF relocations. Added ARC_SDA_12
relocation.
* bfd-in2.h: Regenerated from the previous changes.
* libbfd.h: Regenerated from the previous changes.
include/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* elf/arc-reloc.def: Fixed relocation formula for N*, SDA, SDA_12,
SDA_16_LD*, S13_PCREL, N32_ME, SECTOFF_* relocations.
* opcode/arc-func.h (replace_disp12s): Added. Used for SDA_12 relocation.
bfd/
* elf32-arm.c (CMSE_PREFIX): Define macro.
(elf32_arm_stub_cmse_branch_thumb_only): Define stub sequence.
(cmse_branch_thumb_only): Declare stub.
(struct elf32_arm_link_hash_table): Define cmse_stub_sec field.
(elf32_arm_get_plt_info): Add globals parameter. Use it to return
FALSE if there is no PLT.
(arm_type_of_stub): Adapt to new elf32_arm_get_plt_info signature.
(elf32_arm_final_link_relocate): Likewise.
(elf32_arm_gc_sweep_hook): Likewise.
(elf32_arm_gc_mark_extra_sections): Mark sections holding ARMv8-M
secure entry functions.
(arm_stub_is_thumb): Add case for arm_stub_cmse_branch_thumb_only.
(arm_dedicated_stub_output_section_required): Change to a switch case
and add a case for arm_stub_cmse_branch_thumb_only.
(arm_dedicated_stub_output_section_required_alignment): Likewise.
(arm_stub_dedicated_output_section_name): Likewise.
(arm_stub_dedicated_input_section_ptr): Likewise and remove
ATTRIBUTE_UNUSED for htab parameter.
(arm_stub_required_alignment): Likewise.
(arm_stub_sym_claimed): Likewise.
(arm_dedicated_stub_section_padding): Likewise.
(cmse_scan): New function.
(elf32_arm_size_stubs): Call cmse_scan for ARM M profile targets.
Set stub_changed to TRUE if such veneers were created.
(elf32_arm_swap_symbol_in): Add detection code for CMSE special
symbols.
include/
* arm.h (ARM_GET_SYM_CMSE_SPCL): Define macro.
(ARM_SET_SYM_CMSE_SPCL): Likewise.
ld/
* ld.texinfo (Placement of SG veneers): New concept entry.
* testsuite/ld-arm/arm-elf.exp
(Secure gateway veneers: no .gnu.sgstubs section): New test.
(Secure gateway veneers: wrong entry functions): Likewise.
(Secure gateway veneers (ARMv8-M Baseline)): Likewise.
(Secure gateway veneers (ARMv8-M Mainline)): Likewise.
* testsuite/ld-arm/cmse-veneers.s: New file.
* testsuite/ld-arm/cmse-veneers.d: Likewise.
* testsuite/ld-arm/cmse-veneers.rd: Likewise.
* testsuite/ld-arm/cmse-veneers.sd: Likewise.
* testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out: Likewise.
* testsuite/ld-arm/cmse-veneers-wrong-entryfct.out: Likewise.
include * libiberty.h (MAX_ALLOCA_SIZE): New macro.
libiberty * make-relative-prefix.c (make_relative_prefix_1): Fall back to
malloc if alloca argument is greater than MAX_ALLOCA_SIZE.
* cp-demangle.c (cplus_demangle_operators): Add f[lrLR].
(d_expression_1): Handle them.
(d_maybe_print_fold_expression): New.
(d_print_comp_inner): Use it.
(d_index_template_argument): Handle negative index.
* cp-demangle.c (cplus_demangle_operators): Add sP and sZ.
(d_print_comp_inner): Handle them.
(d_template_args_1): Split out from d_template_args.
(d_args_length): New.
PR c++/70926
* cplus-dem.c: Handle large values and overflow when demangling
length variables.
(demangle_template_value_parm): Read only until end of mangled string.
(do_hpacc_template_literal): Likewise.
(do_type): Handle overflow when demangling array indices.
* cp-demangle.c (cplus_demangle_print_callback): Avoid zero-length
VLAs.
PR c++/70498
* cp-demangle.c (d_expression_1): Formatting fix.
* cplus-dem.c (enum type_kind_t): Add tk_rvalue_reference
constant.
(demangle_template_value_parm): Handle tk_rvalue_reference
type kind.
(do_type): Support 'O' type id (rvalue references).
* testsuite/demangle-expected: Add tests.
PR c++/70498
* cp-demangle.c: Parse numbers as integer instead of long to avoid
overflow after sanity checks. Include <limits.h> if available.
(INT_MAX): Define if necessary.
(d_make_template_param): Takes integer argument instead of long.
(d_make_function_param): Likewise.
(d_append_num): Likewise.
(d_identifier): Likewise.
(d_number): Parse as and return integer.
(d_compact_number): Handle overflow.
(d_source_name): Change variable type to integer for parsed number.
(d_java_resource): Likewise.
(d_special_name): Likewise.
(d_discriminator): Likewise.
(d_unnamed_type): Likewise.
* testsuite/demangle-expected: Add regression test cases.
* configure: Remove SH5 support.
PR c++/69687
* cplus-dem.c: Include <limits.h> if available.
(INT_MAX): Define if necessary.
(remember_type, remember_Ktype, register_Btype, string_need):
Abort if we detect cases where we the size of the allocation would
overflow.
PR c++/70492
* cplus-dem.c (gnu_special): Handle case where consume_count returns
-1.
PR c++/67394
PR c++/70481
* cplus-dem.c (squangle_mop_up): Zero bsize/ksize after freeing
btypevec/ktypevec.
* testsuite/demangle-expected: Add coverage tests.
opcodes * arc-nps400-tbl.h: Change block comments to GNU format.
* arc-dis.c: Add new globals addrtypenames,
addrtypenames_max, and addtypeunknown.
(get_addrtype): New function.
(print_insn_arc): Print colons and address types when
required.
* arc-opc.c: Add MAKE_INSERT_NPS_ADDRTYPE macro and use to
define insert and extract functions for all address types.
(arc_operands): Add operands for colon and all address
types.
* arc-nps-400-tbl.h: Add NPS-400 BMU instructions to opcode table.
* arc-opc.c: Add NPS_BD_TYPE and NPS_BMU_NUM operands,
insert_nps_bd_num_buff and extract_nps_bd_num_buff functions.
* arc-nps-400-tbl.h: Add NPS-400 PMU instructions to opcode table.
* arc-opc.c: Add NPS_PMU_NXT_DST and NPS_PMU_NUM_JOB operands,
insert_nps_pmu_num_job and extract_nps_pmu_num_job functions.
include * opcode/arc.h: Add ARC_OPERAND_ADDRTYPE,
ARC_OPERAND_COLON. Add the arc_nps_address_type enum and
ARC_NUM_ADDRTYPES.
* opcode/arc.h: Add BMU to insn_class_t enum.
* opcode/arc.h: Add PMU to insn_class_t enum.
gas * config/tc-arc.c: Add new global arc_addrtype_hash.
Define O_colon and O_addrtype.
(debug_exp): Add O_colon and O_addrtype.
(tokenize_arguments): Handle colon and address type
tokens.
(declare_addrtype): New function.
(md_begin): Initialise arc_addrtype_hash.
(arc_parse_name): Add lookup of address types.
(assemble_insn): Handle colons and address types by
ignoring them.
* testsuite/gas/arc/nps400-8.s: New file.
* testsuite/gas/arc/nps400-8.d: New file.
* testsuite/gas/arc/nps400-8.s: Add PMU instruction tests.
* testsuite/gas/arc/nps400-8.d: Add expected PMU
instruction output.
FreeBSD's librt uses SIGLIBRT as an internal signal to implement
SIGEV_THREAD sigevent notifications. Similar to SIGLWP or SIGCANCEL
this signal should be passed through to child processes by default.
include/ChangeLog:
* signals.def: Add GDB_SIGNAL_LIBRT.
gdb/ChangeLog:
* common/signals.c (gdb_signal_from_host): Handle SIGLIBRT.
(do_gdb_signal_to_host): Likewise.
* infrun.c (_initialize_infrun): Pass GDB_SIGNAL_LIBRT through to
programs.
* proc-events.c (signal_table): Add entry for SIGLIBRT.
The R_ARC_SDA32 is wrongly described as a ME relocation, fix it. Offset the
__SDATA_BEGIN__ to take advantage of the signed 9-bit field of the
load/store instructions.
include/
2016-07-08 Claudiu Zissulescu <claziss@synopsys.com>
* elf/arc-reloc.def (ARC_SDA32): Don't use ME transformation.
ld/
2016-07-08 Claudiu Zissulescu <claziss@synopsys.com>
* emulparams/arcelf.sh (SDATA_START_SYMBOLS): Add offset.
* testsuite/ld-arc/sda-relocs.dd: New file.
* testsuite/ld-arc/sda-relocs.ld: Likewise.
* testsuite/ld-arc/sda-relocs.rd: Likewise.
* testsuite/ld-arc/sda-relocs.s: Likewise.
* testsuite/ld-arc/arc.exp: Add SDA tests.
TLS relocations did not support multiple TLS modes for the same
symbol in a single object file.
Refactored how GOT and TLS is implemented. Removed code duplications between
local and global symbols conditioning.
bfd/ChangeLog:
2016-06-14 Cupertino Miranda <cmiranda@synopsys.com>
* arc-got.h: Moved got related structures from elf32-arc.c to
this file. More precisely, tls_type_e, tls_got_entries, got_entry.
* (arc_get_local_got_ents,
got_entry_for_type,
new_got_entry_to_list,
tls_type_for_reloc,
symbol_has_entry_of_type,
get_got_entry_list_for_symbol,
arc_got_entry_type_for_reloc,
ADD_SYMBOL_REF_SEC_AND_RELOC,
arc_fill_got_info_for_reloc,
relocate_fix_got_relocs_for_got_info,
create_got_dynrelocs_for_single_entry,
create_got_dynrelocs_for_got_info): Added to file.
* elf32-arc.c: Removed GOT & TLS related structs and functions to
arc-got.h.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
Szabolcs Nagy
Claudiu Zissulescu
Jose E. Marchesi
Alan Modra
David Tolnay
Jason Merrill
Thomas Preud'homme
Graham Markall
Andrew Burgess
Nick Clifton
Pedro Alves
Richard Sandiford
Richard Earnshaw
Cupertino Miranda
Andrew Jenner
John Baldwin
Andre Vieria