ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
/*
|
|
|
|
* QEMU SDL display driver
|
|
|
|
*
|
|
|
|
* Copyright (c) 2003 Fabrice Bellard
|
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
|
|
* in the Software without restriction, including without limitation the rights
|
|
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
|
|
* furnished to do so, subject to the following conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice shall be included in
|
|
|
|
* all copies or substantial portions of the Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
|
|
* THE SOFTWARE.
|
|
|
|
*/
|
|
|
|
/* Ported SDL 1.2 code to 2.0 by Dave Airlie. */
|
|
|
|
|
2016-01-29 18:49:51 +01:00
|
|
|
#include "qemu/osdep.h"
|
2019-05-23 16:35:07 +02:00
|
|
|
#include "qemu/module.h"
|
2020-08-18 11:59:27 +02:00
|
|
|
#include "qemu/cutils.h"
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
#include "ui/console.h"
|
|
|
|
#include "ui/input.h"
|
2014-11-11 10:21:24 +01:00
|
|
|
#include "ui/sdl2.h"
|
2019-08-12 07:23:59 +02:00
|
|
|
#include "sysemu/runstate.h"
|
2020-12-11 17:52:43 +01:00
|
|
|
#include "sysemu/runstate-action.h"
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
#include "sysemu/sysemu.h"
|
2020-05-16 09:20:09 +02:00
|
|
|
#include "ui/win32-kbd-hook.h"
|
2022-01-08 16:39:46 +01:00
|
|
|
#include "qemu/log.h"
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
|
|
|
|
static int sdl2_num_outputs;
|
2014-11-11 10:21:24 +01:00
|
|
|
static struct sdl2_console *sdl2_console;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
|
|
|
|
static SDL_Surface *guest_sprite_surface;
|
|
|
|
static int gui_grab; /* if true, all keyboard/mouse events are grabbed */
|
2022-05-19 17:56:24 +02:00
|
|
|
static bool alt_grab;
|
|
|
|
static bool ctrl_grab;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
|
|
|
|
static int gui_saved_grab;
|
|
|
|
static int gui_fullscreen;
|
|
|
|
static int gui_grab_code = KMOD_LALT | KMOD_LCTRL;
|
|
|
|
static SDL_Cursor *sdl_cursor_normal;
|
|
|
|
static SDL_Cursor *sdl_cursor_hidden;
|
|
|
|
static int absolute_enabled;
|
|
|
|
static int guest_cursor;
|
|
|
|
static int guest_x, guest_y;
|
|
|
|
static SDL_Cursor *guest_sprite;
|
|
|
|
static Notifier mouse_mode_notifier;
|
|
|
|
|
2016-01-12 20:18:24 +01:00
|
|
|
#define SDL2_REFRESH_INTERVAL_BUSY 10
|
|
|
|
#define SDL2_MAX_IDLE_COUNT (2 * GUI_REFRESH_INTERVAL_DEFAULT \
|
|
|
|
/ SDL2_REFRESH_INTERVAL_BUSY + 1)
|
|
|
|
|
2023-02-15 15:29:29 +01:00
|
|
|
/* introduced in SDL 2.0.10 */
|
|
|
|
#ifndef SDL_HINT_RENDER_BATCHING
|
|
|
|
#define SDL_HINT_RENDER_BATCHING "SDL_RENDER_BATCHING"
|
|
|
|
#endif
|
|
|
|
|
2014-11-11 10:21:24 +01:00
|
|
|
static void sdl_update_caption(struct sdl2_console *scon);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
|
2014-11-11 10:21:24 +01:00
|
|
|
static struct sdl2_console *get_scon_from_window(uint32_t window_id)
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
{
|
|
|
|
int i;
|
|
|
|
for (i = 0; i < sdl2_num_outputs; i++) {
|
|
|
|
if (sdl2_console[i].real_window == SDL_GetWindowFromID(window_id)) {
|
|
|
|
return &sdl2_console[i];
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2014-11-11 13:22:49 +01:00
|
|
|
void sdl2_window_create(struct sdl2_console *scon)
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
{
|
2014-11-11 13:12:02 +01:00
|
|
|
int flags = 0;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
|
2014-11-11 13:12:02 +01:00
|
|
|
if (!scon->surface) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
assert(!scon->real_window);
|
|
|
|
|
|
|
|
if (gui_fullscreen) {
|
|
|
|
flags |= SDL_WINDOW_FULLSCREEN_DESKTOP;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
} else {
|
2014-11-11 13:12:02 +01:00
|
|
|
flags |= SDL_WINDOW_RESIZABLE;
|
|
|
|
}
|
|
|
|
if (scon->hidden) {
|
|
|
|
flags |= SDL_WINDOW_HIDDEN;
|
|
|
|
}
|
2020-10-04 12:42:21 +02:00
|
|
|
#ifdef CONFIG_OPENGL
|
|
|
|
if (scon->opengl) {
|
|
|
|
flags |= SDL_WINDOW_OPENGL;
|
|
|
|
}
|
|
|
|
#endif
|
2014-11-11 13:12:02 +01:00
|
|
|
|
|
|
|
scon->real_window = SDL_CreateWindow("", SDL_WINDOWPOS_UNDEFINED,
|
|
|
|
SDL_WINDOWPOS_UNDEFINED,
|
|
|
|
surface_width(scon->surface),
|
|
|
|
surface_height(scon->surface),
|
|
|
|
flags);
|
2023-02-15 15:29:29 +01:00
|
|
|
if (scon->opengl) {
|
|
|
|
const char *driver = "opengl";
|
|
|
|
|
|
|
|
if (scon->opts->gl == DISPLAYGL_MODE_ES) {
|
|
|
|
driver = "opengles2";
|
|
|
|
}
|
|
|
|
|
|
|
|
SDL_SetHint(SDL_HINT_RENDER_DRIVER, driver);
|
|
|
|
SDL_SetHint(SDL_HINT_RENDER_BATCHING, "1");
|
|
|
|
|
2023-01-24 14:47:18 +01:00
|
|
|
scon->winctx = SDL_GL_CreateContext(scon->real_window);
|
2023-06-12 11:19:59 +02:00
|
|
|
} else {
|
|
|
|
/* The SDL renderer is only used by sdl2-2D, when OpenGL is disabled */
|
|
|
|
scon->real_renderer = SDL_CreateRenderer(scon->real_window, -1, 0);
|
2014-11-11 16:54:45 +01:00
|
|
|
}
|
2014-11-11 13:12:02 +01:00
|
|
|
sdl_update_caption(scon);
|
|
|
|
}
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
|
2014-11-11 13:22:49 +01:00
|
|
|
void sdl2_window_destroy(struct sdl2_console *scon)
|
2014-11-11 13:12:02 +01:00
|
|
|
{
|
|
|
|
if (!scon->real_window) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2023-06-12 11:19:59 +02:00
|
|
|
if (scon->winctx) {
|
|
|
|
SDL_GL_DeleteContext(scon->winctx);
|
|
|
|
scon->winctx = NULL;
|
|
|
|
}
|
|
|
|
if (scon->real_renderer) {
|
|
|
|
SDL_DestroyRenderer(scon->real_renderer);
|
|
|
|
scon->real_renderer = NULL;
|
|
|
|
}
|
2014-11-11 13:12:02 +01:00
|
|
|
SDL_DestroyWindow(scon->real_window);
|
|
|
|
scon->real_window = NULL;
|
|
|
|
}
|
|
|
|
|
2014-11-11 13:22:49 +01:00
|
|
|
void sdl2_window_resize(struct sdl2_console *scon)
|
2014-11-11 13:12:02 +01:00
|
|
|
{
|
|
|
|
if (!scon->real_window) {
|
|
|
|
return;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
2014-11-11 13:12:02 +01:00
|
|
|
|
|
|
|
SDL_SetWindowSize(scon->real_window,
|
|
|
|
surface_width(scon->surface),
|
|
|
|
surface_height(scon->surface));
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
|
|
|
|
2014-11-11 16:54:45 +01:00
|
|
|
static void sdl2_redraw(struct sdl2_console *scon)
|
|
|
|
{
|
|
|
|
if (scon->opengl) {
|
|
|
|
#ifdef CONFIG_OPENGL
|
|
|
|
sdl2_gl_redraw(scon);
|
|
|
|
#endif
|
|
|
|
} else {
|
|
|
|
sdl2_2d_redraw(scon);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-11-11 10:21:24 +01:00
|
|
|
static void sdl_update_caption(struct sdl2_console *scon)
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
{
|
|
|
|
char win_title[1024];
|
|
|
|
char icon_title[1024];
|
|
|
|
const char *status = "";
|
|
|
|
|
|
|
|
if (!runstate_is_running()) {
|
|
|
|
status = " [Stopped]";
|
|
|
|
} else if (gui_grab) {
|
|
|
|
if (alt_grab) {
|
2023-10-30 03:41:19 +01:00
|
|
|
#ifdef CONFIG_DARWIN
|
|
|
|
status = " - Press ⌃⌥⇧G to exit grab";
|
|
|
|
#else
|
2018-01-15 16:48:54 +01:00
|
|
|
status = " - Press Ctrl-Alt-Shift-G to exit grab";
|
2023-10-30 03:41:19 +01:00
|
|
|
#endif
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
} else if (ctrl_grab) {
|
2018-01-15 16:48:54 +01:00
|
|
|
status = " - Press Right-Ctrl-G to exit grab";
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
} else {
|
2023-10-30 03:41:19 +01:00
|
|
|
#ifdef CONFIG_DARWIN
|
|
|
|
status = " - Press ⌃⌥G to exit grab";
|
|
|
|
#else
|
2018-01-15 16:48:54 +01:00
|
|
|
status = " - Press Ctrl-Alt-G to exit grab";
|
2023-10-30 03:41:19 +01:00
|
|
|
#endif
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (qemu_name) {
|
|
|
|
snprintf(win_title, sizeof(win_title), "QEMU (%s-%d)%s", qemu_name,
|
|
|
|
scon->idx, status);
|
|
|
|
snprintf(icon_title, sizeof(icon_title), "QEMU (%s)", qemu_name);
|
|
|
|
} else {
|
|
|
|
snprintf(win_title, sizeof(win_title), "QEMU%s", status);
|
|
|
|
snprintf(icon_title, sizeof(icon_title), "QEMU");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (scon->real_window) {
|
|
|
|
SDL_SetWindowTitle(scon->real_window, win_title);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2020-01-31 12:35:21 +01:00
|
|
|
static void sdl_hide_cursor(struct sdl2_console *scon)
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
{
|
2020-01-31 12:35:21 +01:00
|
|
|
if (scon->opts->has_show_cursor && scon->opts->show_cursor) {
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2017-11-12 20:30:27 +01:00
|
|
|
SDL_ShowCursor(SDL_DISABLE);
|
|
|
|
SDL_SetCursor(sdl_cursor_hidden);
|
|
|
|
|
2023-09-21 10:29:34 +02:00
|
|
|
if (!qemu_input_is_absolute(scon->dcl.con)) {
|
2014-04-01 22:37:11 +02:00
|
|
|
SDL_SetRelativeMouseMode(SDL_TRUE);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2020-01-31 12:35:21 +01:00
|
|
|
static void sdl_show_cursor(struct sdl2_console *scon)
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
{
|
2020-01-31 12:35:21 +01:00
|
|
|
if (scon->opts->has_show_cursor && scon->opts->show_cursor) {
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2023-09-21 10:29:34 +02:00
|
|
|
if (!qemu_input_is_absolute(scon->dcl.con)) {
|
2014-04-01 22:37:11 +02:00
|
|
|
SDL_SetRelativeMouseMode(SDL_FALSE);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
2017-11-12 20:30:27 +01:00
|
|
|
|
|
|
|
if (guest_cursor &&
|
2023-09-21 10:29:34 +02:00
|
|
|
(gui_grab || qemu_input_is_absolute(scon->dcl.con) || absolute_enabled)) {
|
2017-11-12 20:30:27 +01:00
|
|
|
SDL_SetCursor(guest_sprite);
|
|
|
|
} else {
|
|
|
|
SDL_SetCursor(sdl_cursor_normal);
|
|
|
|
}
|
|
|
|
|
|
|
|
SDL_ShowCursor(SDL_ENABLE);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
|
|
|
|
2014-11-11 10:21:24 +01:00
|
|
|
static void sdl_grab_start(struct sdl2_console *scon)
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
{
|
2014-05-26 14:05:51 +02:00
|
|
|
QemuConsole *con = scon ? scon->dcl.con : NULL;
|
|
|
|
|
|
|
|
if (!con || !qemu_console_is_graphic(con)) {
|
|
|
|
return;
|
|
|
|
}
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
/*
|
|
|
|
* If the application is not active, do not try to enter grab state. This
|
|
|
|
* prevents 'SDL_WM_GrabInput(SDL_GRAB_ON)' from blocking all the
|
|
|
|
* application (SDL bug).
|
|
|
|
*/
|
|
|
|
if (!(SDL_GetWindowFlags(scon->real_window) & SDL_WINDOW_INPUT_FOCUS)) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
if (guest_cursor) {
|
|
|
|
SDL_SetCursor(guest_sprite);
|
2023-09-21 10:29:34 +02:00
|
|
|
if (!qemu_input_is_absolute(scon->dcl.con) && !absolute_enabled) {
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
SDL_WarpMouseInWindow(scon->real_window, guest_x, guest_y);
|
|
|
|
}
|
|
|
|
} else {
|
2020-01-31 12:35:21 +01:00
|
|
|
sdl_hide_cursor(scon);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
|
|
|
SDL_SetWindowGrab(scon->real_window, SDL_TRUE);
|
|
|
|
gui_grab = 1;
|
2020-05-16 09:20:09 +02:00
|
|
|
win32_kbd_set_grab(true);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
sdl_update_caption(scon);
|
|
|
|
}
|
|
|
|
|
2014-11-11 10:21:24 +01:00
|
|
|
static void sdl_grab_end(struct sdl2_console *scon)
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
{
|
|
|
|
SDL_SetWindowGrab(scon->real_window, SDL_FALSE);
|
|
|
|
gui_grab = 0;
|
2020-05-16 09:20:09 +02:00
|
|
|
win32_kbd_set_grab(false);
|
2020-01-31 12:35:21 +01:00
|
|
|
sdl_show_cursor(scon);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
sdl_update_caption(scon);
|
|
|
|
}
|
|
|
|
|
2014-11-11 10:21:24 +01:00
|
|
|
static void absolute_mouse_grab(struct sdl2_console *scon)
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
{
|
|
|
|
int mouse_x, mouse_y;
|
|
|
|
int scr_w, scr_h;
|
|
|
|
SDL_GetMouseState(&mouse_x, &mouse_y);
|
|
|
|
SDL_GetWindowSize(scon->real_window, &scr_w, &scr_h);
|
|
|
|
if (mouse_x > 0 && mouse_x < scr_w - 1 &&
|
|
|
|
mouse_y > 0 && mouse_y < scr_h - 1) {
|
|
|
|
sdl_grab_start(scon);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sdl_mouse_mode_change(Notifier *notify, void *data)
|
|
|
|
{
|
2023-09-21 10:29:34 +02:00
|
|
|
if (qemu_input_is_absolute(sdl2_console[0].dcl.con)) {
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
if (!absolute_enabled) {
|
|
|
|
absolute_enabled = 1;
|
2018-02-02 13:08:03 +01:00
|
|
|
SDL_SetRelativeMouseMode(SDL_FALSE);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
absolute_mouse_grab(&sdl2_console[0]);
|
|
|
|
}
|
|
|
|
} else if (absolute_enabled) {
|
|
|
|
if (!gui_fullscreen) {
|
|
|
|
sdl_grab_end(&sdl2_console[0]);
|
|
|
|
}
|
|
|
|
absolute_enabled = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-11-11 10:21:24 +01:00
|
|
|
static void sdl_send_mouse_event(struct sdl2_console *scon, int dx, int dy,
|
2014-04-22 00:58:50 +02:00
|
|
|
int x, int y, int state)
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
{
|
qapi: Don't let implicit enum MAX member collide
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.
This patch was mostly generated by applying a temporary patch:
|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
| max_index = c_enum_const(name, 'MAX', prefix)
| ret += mcgen('''
| [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
| max_index=max_index)
then running:
$ cat qapi-{types,event}.c tests/test-qapi-types.c |
sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list
The only things not generated are the changes in scripts/qapi.py.
Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Rebased to current master, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-18 09:52:57 +01:00
|
|
|
static uint32_t bmap[INPUT_BUTTON__MAX] = {
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
[INPUT_BUTTON_LEFT] = SDL_BUTTON(SDL_BUTTON_LEFT),
|
|
|
|
[INPUT_BUTTON_MIDDLE] = SDL_BUTTON(SDL_BUTTON_MIDDLE),
|
|
|
|
[INPUT_BUTTON_RIGHT] = SDL_BUTTON(SDL_BUTTON_RIGHT),
|
2020-12-10 15:33:06 +01:00
|
|
|
[INPUT_BUTTON_SIDE] = SDL_BUTTON(SDL_BUTTON_X1),
|
|
|
|
[INPUT_BUTTON_EXTRA] = SDL_BUTTON(SDL_BUTTON_X2)
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
};
|
|
|
|
static uint32_t prev_state;
|
|
|
|
|
|
|
|
if (prev_state != state) {
|
|
|
|
qemu_input_update_buttons(scon->dcl.con, bmap, prev_state, state);
|
|
|
|
prev_state = state;
|
|
|
|
}
|
|
|
|
|
2023-09-21 10:29:34 +02:00
|
|
|
if (qemu_input_is_absolute(scon->dcl.con)) {
|
2017-11-17 12:22:57 +01:00
|
|
|
qemu_input_queue_abs(scon->dcl.con, INPUT_AXIS_X,
|
|
|
|
x, 0, surface_width(scon->surface));
|
|
|
|
qemu_input_queue_abs(scon->dcl.con, INPUT_AXIS_Y,
|
|
|
|
y, 0, surface_height(scon->surface));
|
2014-04-01 22:37:10 +02:00
|
|
|
} else {
|
|
|
|
if (guest_cursor) {
|
|
|
|
x -= guest_x;
|
|
|
|
y -= guest_y;
|
|
|
|
guest_x += x;
|
|
|
|
guest_y += y;
|
|
|
|
dx = x;
|
|
|
|
dy = y;
|
|
|
|
}
|
|
|
|
qemu_input_queue_rel(scon->dcl.con, INPUT_AXIS_X, dx);
|
|
|
|
qemu_input_queue_rel(scon->dcl.con, INPUT_AXIS_Y, dy);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
|
|
|
qemu_input_event_sync();
|
|
|
|
}
|
|
|
|
|
2014-11-11 10:21:24 +01:00
|
|
|
static void toggle_full_screen(struct sdl2_console *scon)
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
{
|
|
|
|
gui_fullscreen = !gui_fullscreen;
|
|
|
|
if (gui_fullscreen) {
|
2014-11-11 13:12:02 +01:00
|
|
|
SDL_SetWindowFullscreen(scon->real_window,
|
|
|
|
SDL_WINDOW_FULLSCREEN_DESKTOP);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
gui_saved_grab = gui_grab;
|
|
|
|
sdl_grab_start(scon);
|
|
|
|
} else {
|
|
|
|
if (!gui_saved_grab) {
|
|
|
|
sdl_grab_end(scon);
|
|
|
|
}
|
2014-11-11 13:12:02 +01:00
|
|
|
SDL_SetWindowFullscreen(scon->real_window, 0);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
2014-11-11 16:54:45 +01:00
|
|
|
sdl2_redraw(scon);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
|
|
|
|
2017-11-17 12:22:58 +01:00
|
|
|
static int get_mod_state(void)
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
{
|
2017-11-17 12:22:58 +01:00
|
|
|
SDL_Keymod mod = SDL_GetModState();
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
|
|
|
|
if (alt_grab) {
|
2017-11-17 12:22:58 +01:00
|
|
|
return (mod & (gui_grab_code | KMOD_LSHIFT)) ==
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
(gui_grab_code | KMOD_LSHIFT);
|
|
|
|
} else if (ctrl_grab) {
|
2017-11-17 12:22:58 +01:00
|
|
|
return (mod & KMOD_RCTRL) == KMOD_RCTRL;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
} else {
|
2017-11-17 12:22:58 +01:00
|
|
|
return (mod & gui_grab_code) == gui_grab_code;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
2017-11-17 12:22:58 +01:00
|
|
|
}
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
|
2020-05-16 09:20:09 +02:00
|
|
|
static void *sdl2_win32_get_hwnd(struct sdl2_console *scon)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_WIN32
|
|
|
|
SDL_SysWMinfo info;
|
|
|
|
|
|
|
|
SDL_VERSION(&info.version);
|
|
|
|
if (SDL_GetWindowWMInfo(scon->real_window, &info)) {
|
|
|
|
return info.info.win.window;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2017-11-17 12:22:58 +01:00
|
|
|
static void handle_keydown(SDL_Event *ev)
|
|
|
|
{
|
|
|
|
int win;
|
|
|
|
struct sdl2_console *scon = get_scon_from_window(ev->key.windowID);
|
2018-02-20 16:04:44 +01:00
|
|
|
int gui_key_modifier_pressed = get_mod_state();
|
2019-01-22 10:28:09 +01:00
|
|
|
int gui_keysym = 0;
|
2017-11-17 12:22:58 +01:00
|
|
|
|
2020-04-27 15:24:12 +02:00
|
|
|
if (!scon) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2017-11-17 12:22:58 +01:00
|
|
|
if (!scon->ignore_hotkeys && gui_key_modifier_pressed && !ev->key.repeat) {
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
switch (ev->key.keysym.scancode) {
|
2014-05-27 09:44:39 +02:00
|
|
|
case SDL_SCANCODE_2:
|
|
|
|
case SDL_SCANCODE_3:
|
|
|
|
case SDL_SCANCODE_4:
|
|
|
|
case SDL_SCANCODE_5:
|
|
|
|
case SDL_SCANCODE_6:
|
|
|
|
case SDL_SCANCODE_7:
|
|
|
|
case SDL_SCANCODE_8:
|
|
|
|
case SDL_SCANCODE_9:
|
2016-05-06 20:03:06 +02:00
|
|
|
if (gui_grab) {
|
|
|
|
sdl_grab_end(scon);
|
|
|
|
}
|
|
|
|
|
2014-05-27 09:44:39 +02:00
|
|
|
win = ev->key.keysym.scancode - SDL_SCANCODE_1;
|
|
|
|
if (win < sdl2_num_outputs) {
|
|
|
|
sdl2_console[win].hidden = !sdl2_console[win].hidden;
|
|
|
|
if (sdl2_console[win].real_window) {
|
|
|
|
if (sdl2_console[win].hidden) {
|
|
|
|
SDL_HideWindow(sdl2_console[win].real_window);
|
|
|
|
} else {
|
|
|
|
SDL_ShowWindow(sdl2_console[win].real_window);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
gui_keysym = 1;
|
|
|
|
}
|
|
|
|
break;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
case SDL_SCANCODE_F:
|
|
|
|
toggle_full_screen(scon);
|
|
|
|
gui_keysym = 1;
|
|
|
|
break;
|
2018-01-15 16:48:54 +01:00
|
|
|
case SDL_SCANCODE_G:
|
|
|
|
gui_keysym = 1;
|
|
|
|
if (!gui_grab) {
|
|
|
|
sdl_grab_start(scon);
|
|
|
|
} else if (!gui_fullscreen) {
|
|
|
|
sdl_grab_end(scon);
|
|
|
|
}
|
|
|
|
break;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
case SDL_SCANCODE_U:
|
2018-06-13 19:27:07 +02:00
|
|
|
sdl2_window_resize(scon);
|
2014-11-11 16:54:45 +01:00
|
|
|
if (!scon->opengl) {
|
|
|
|
/* re-create scon->texture */
|
|
|
|
sdl2_2d_switch(&scon->dcl, scon->surface);
|
|
|
|
}
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
gui_keysym = 1;
|
|
|
|
break;
|
2014-11-11 13:12:02 +01:00
|
|
|
#if 0
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
case SDL_SCANCODE_KP_PLUS:
|
|
|
|
case SDL_SCANCODE_KP_MINUS:
|
|
|
|
if (!gui_fullscreen) {
|
|
|
|
int scr_w, scr_h;
|
|
|
|
int width, height;
|
|
|
|
SDL_GetWindowSize(scon->real_window, &scr_w, &scr_h);
|
|
|
|
|
|
|
|
width = MAX(scr_w + (ev->key.keysym.scancode ==
|
|
|
|
SDL_SCANCODE_KP_PLUS ? 50 : -50),
|
|
|
|
160);
|
|
|
|
height = (surface_height(scon->surface) * width) /
|
|
|
|
surface_width(scon->surface);
|
2014-11-11 13:12:02 +01:00
|
|
|
fprintf(stderr, "%s: scale to %dx%d\n",
|
|
|
|
__func__, width, height);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
sdl_scale(scon, width, height);
|
2014-11-11 16:54:45 +01:00
|
|
|
sdl2_redraw(scon);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
gui_keysym = 1;
|
|
|
|
}
|
2014-11-11 13:12:02 +01:00
|
|
|
#endif
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (!gui_keysym) {
|
2014-11-11 10:58:19 +01:00
|
|
|
sdl2_process_key(scon, &ev->key);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void handle_keyup(SDL_Event *ev)
|
|
|
|
{
|
2014-11-11 10:21:24 +01:00
|
|
|
struct sdl2_console *scon = get_scon_from_window(ev->key.windowID);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
|
2020-04-27 15:24:12 +02:00
|
|
|
if (!scon) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2017-11-17 12:22:58 +01:00
|
|
|
scon->ignore_hotkeys = false;
|
2019-01-22 10:28:09 +01:00
|
|
|
sdl2_process_key(scon, &ev->key);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
|
|
|
|
2014-05-26 14:05:51 +02:00
|
|
|
static void handle_textinput(SDL_Event *ev)
|
|
|
|
{
|
2018-06-26 08:40:17 +02:00
|
|
|
struct sdl2_console *scon = get_scon_from_window(ev->text.windowID);
|
2014-05-26 14:05:51 +02:00
|
|
|
QemuConsole *con = scon ? scon->dcl.con : NULL;
|
|
|
|
|
2020-04-27 15:24:12 +02:00
|
|
|
if (!con) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2023-08-30 11:38:18 +02:00
|
|
|
if (QEMU_IS_TEXT_CONSOLE(con)) {
|
2023-08-30 11:38:20 +02:00
|
|
|
qemu_text_console_put_string(QEMU_TEXT_CONSOLE(con), ev->text.text, strlen(ev->text.text));
|
2014-05-26 14:05:51 +02:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
static void handle_mousemotion(SDL_Event *ev)
|
|
|
|
{
|
|
|
|
int max_x, max_y;
|
2018-06-26 08:40:17 +02:00
|
|
|
struct sdl2_console *scon = get_scon_from_window(ev->motion.windowID);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
|
2018-06-26 08:47:29 +02:00
|
|
|
if (!scon || !qemu_console_is_graphic(scon->dcl.con)) {
|
2017-11-17 12:22:56 +01:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2023-09-21 10:29:34 +02:00
|
|
|
if (qemu_input_is_absolute(scon->dcl.con) || absolute_enabled) {
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
int scr_w, scr_h;
|
|
|
|
SDL_GetWindowSize(scon->real_window, &scr_w, &scr_h);
|
|
|
|
max_x = scr_w - 1;
|
|
|
|
max_y = scr_h - 1;
|
2017-11-12 20:30:31 +01:00
|
|
|
if (gui_grab && !gui_fullscreen
|
|
|
|
&& (ev->motion.x == 0 || ev->motion.y == 0 ||
|
|
|
|
ev->motion.x == max_x || ev->motion.y == max_y)) {
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
sdl_grab_end(scon);
|
|
|
|
}
|
|
|
|
if (!gui_grab &&
|
|
|
|
(ev->motion.x > 0 && ev->motion.x < max_x &&
|
|
|
|
ev->motion.y > 0 && ev->motion.y < max_y)) {
|
|
|
|
sdl_grab_start(scon);
|
|
|
|
}
|
|
|
|
}
|
2023-09-21 10:29:34 +02:00
|
|
|
if (gui_grab || qemu_input_is_absolute(scon->dcl.con) || absolute_enabled) {
|
2014-04-22 00:58:50 +02:00
|
|
|
sdl_send_mouse_event(scon, ev->motion.xrel, ev->motion.yrel,
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
ev->motion.x, ev->motion.y, ev->motion.state);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void handle_mousebutton(SDL_Event *ev)
|
|
|
|
{
|
|
|
|
int buttonstate = SDL_GetMouseState(NULL, NULL);
|
|
|
|
SDL_MouseButtonEvent *bev;
|
2018-06-26 08:40:17 +02:00
|
|
|
struct sdl2_console *scon = get_scon_from_window(ev->button.windowID);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
|
2018-06-26 08:47:29 +02:00
|
|
|
if (!scon || !qemu_console_is_graphic(scon->dcl.con)) {
|
2017-11-17 12:22:56 +01:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
bev = &ev->button;
|
2023-09-21 10:29:34 +02:00
|
|
|
if (!gui_grab && !qemu_input_is_absolute(scon->dcl.con)) {
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
if (ev->type == SDL_MOUSEBUTTONUP && bev->button == SDL_BUTTON_LEFT) {
|
|
|
|
/* start grabbing all events */
|
|
|
|
sdl_grab_start(scon);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
if (ev->type == SDL_MOUSEBUTTONDOWN) {
|
|
|
|
buttonstate |= SDL_BUTTON(bev->button);
|
|
|
|
} else {
|
|
|
|
buttonstate &= ~SDL_BUTTON(bev->button);
|
|
|
|
}
|
2014-04-22 00:58:50 +02:00
|
|
|
sdl_send_mouse_event(scon, 0, 0, bev->x, bev->y, buttonstate);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void handle_mousewheel(SDL_Event *ev)
|
|
|
|
{
|
2018-06-26 08:40:17 +02:00
|
|
|
struct sdl2_console *scon = get_scon_from_window(ev->wheel.windowID);
|
2014-04-22 00:58:50 +02:00
|
|
|
SDL_MouseWheelEvent *wev = &ev->wheel;
|
|
|
|
InputButton btn;
|
|
|
|
|
2018-06-26 08:47:29 +02:00
|
|
|
if (!scon || !qemu_console_is_graphic(scon->dcl.con)) {
|
2017-11-17 12:22:56 +01:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2014-04-22 00:58:50 +02:00
|
|
|
if (wev->y > 0) {
|
2016-01-12 12:14:12 +01:00
|
|
|
btn = INPUT_BUTTON_WHEEL_UP;
|
2014-04-22 00:58:50 +02:00
|
|
|
} else if (wev->y < 0) {
|
2016-01-12 12:14:12 +01:00
|
|
|
btn = INPUT_BUTTON_WHEEL_DOWN;
|
2022-01-08 16:39:46 +01:00
|
|
|
} else if (wev->x < 0) {
|
|
|
|
btn = INPUT_BUTTON_WHEEL_RIGHT;
|
|
|
|
} else if (wev->x > 0) {
|
|
|
|
btn = INPUT_BUTTON_WHEEL_LEFT;
|
2014-04-22 00:58:50 +02:00
|
|
|
} else {
|
|
|
|
return;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
2014-04-22 00:58:50 +02:00
|
|
|
|
|
|
|
qemu_input_queue_btn(scon->dcl.con, btn, true);
|
|
|
|
qemu_input_event_sync();
|
|
|
|
qemu_input_queue_btn(scon->dcl.con, btn, false);
|
|
|
|
qemu_input_event_sync();
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
|
|
|
|
2014-12-12 10:52:51 +01:00
|
|
|
static void handle_windowevent(SDL_Event *ev)
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
{
|
2014-12-12 10:52:51 +01:00
|
|
|
struct sdl2_console *scon = get_scon_from_window(ev->window.windowID);
|
2018-02-02 12:10:15 +01:00
|
|
|
bool allow_close = true;
|
2014-12-12 10:52:51 +01:00
|
|
|
|
2015-06-08 11:12:15 +02:00
|
|
|
if (!scon) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
switch (ev->window.event) {
|
|
|
|
case SDL_WINDOWEVENT_RESIZED:
|
2014-03-25 07:50:36 +01:00
|
|
|
{
|
|
|
|
QemuUIInfo info;
|
|
|
|
memset(&info, 0, sizeof(info));
|
|
|
|
info.width = ev->window.data1;
|
|
|
|
info.height = ev->window.data2;
|
2021-04-13 18:39:11 +02:00
|
|
|
dpy_set_ui_info(scon->dcl.con, &info, true);
|
2014-03-25 07:50:36 +01:00
|
|
|
}
|
2014-11-11 16:54:45 +01:00
|
|
|
sdl2_redraw(scon);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
break;
|
|
|
|
case SDL_WINDOWEVENT_EXPOSED:
|
2014-11-11 16:54:45 +01:00
|
|
|
sdl2_redraw(scon);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
break;
|
|
|
|
case SDL_WINDOWEVENT_FOCUS_GAINED:
|
2020-05-16 09:20:09 +02:00
|
|
|
win32_kbd_set_grab(gui_grab);
|
|
|
|
if (qemu_console_is_graphic(scon->dcl.con)) {
|
|
|
|
win32_kbd_set_window(sdl2_win32_get_hwnd(scon));
|
|
|
|
}
|
|
|
|
/* fall through */
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
case SDL_WINDOWEVENT_ENTER:
|
2023-09-21 10:29:34 +02:00
|
|
|
if (!gui_grab && (qemu_input_is_absolute(scon->dcl.con) || absolute_enabled)) {
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
absolute_mouse_grab(scon);
|
|
|
|
}
|
2017-11-17 12:22:58 +01:00
|
|
|
/* If a new console window opened using a hotkey receives the
|
|
|
|
* focus, SDL sends another KEYDOWN event to the new window,
|
|
|
|
* closing the console window immediately after.
|
|
|
|
*
|
|
|
|
* Work around this by ignoring further hotkey events until a
|
|
|
|
* key is released.
|
|
|
|
*/
|
|
|
|
scon->ignore_hotkeys = get_mod_state();
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
break;
|
|
|
|
case SDL_WINDOWEVENT_FOCUS_LOST:
|
2020-05-16 09:20:09 +02:00
|
|
|
if (qemu_console_is_graphic(scon->dcl.con)) {
|
|
|
|
win32_kbd_set_window(NULL);
|
|
|
|
}
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
if (gui_grab && !gui_fullscreen) {
|
|
|
|
sdl_grab_end(scon);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case SDL_WINDOWEVENT_RESTORED:
|
2014-11-12 08:01:27 +01:00
|
|
|
update_displaychangelistener(&scon->dcl, GUI_REFRESH_INTERVAL_DEFAULT);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
break;
|
|
|
|
case SDL_WINDOWEVENT_MINIMIZED:
|
2014-11-12 08:01:27 +01:00
|
|
|
update_displaychangelistener(&scon->dcl, 500);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
break;
|
|
|
|
case SDL_WINDOWEVENT_CLOSE:
|
2017-11-12 20:30:26 +01:00
|
|
|
if (qemu_console_is_graphic(scon->dcl.con)) {
|
2018-04-13 15:58:41 +02:00
|
|
|
if (scon->opts->has_window_close && !scon->opts->window_close) {
|
2018-02-02 12:10:15 +01:00
|
|
|
allow_close = false;
|
|
|
|
}
|
|
|
|
if (allow_close) {
|
2020-12-11 17:52:43 +01:00
|
|
|
shutdown_action = SHUTDOWN_ACTION_POWEROFF;
|
2017-11-12 20:30:26 +01:00
|
|
|
qemu_system_shutdown_request(SHUTDOWN_CAUSE_HOST_UI);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
SDL_HideWindow(scon->real_window);
|
|
|
|
scon->hidden = true;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
|
|
|
break;
|
2014-12-12 10:52:52 +01:00
|
|
|
case SDL_WINDOWEVENT_SHOWN:
|
2017-11-12 20:30:25 +01:00
|
|
|
scon->hidden = false;
|
2014-12-12 10:52:52 +01:00
|
|
|
break;
|
|
|
|
case SDL_WINDOWEVENT_HIDDEN:
|
2017-11-12 20:30:25 +01:00
|
|
|
scon->hidden = true;
|
2014-12-12 10:52:52 +01:00
|
|
|
break;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-11-12 08:01:27 +01:00
|
|
|
void sdl2_poll_events(struct sdl2_console *scon)
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
{
|
|
|
|
SDL_Event ev1, *ev = &ev1;
|
2018-02-02 12:10:15 +01:00
|
|
|
bool allow_close = true;
|
2016-01-12 20:18:24 +01:00
|
|
|
int idle = 1;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
|
|
|
|
if (scon->last_vm_running != runstate_is_running()) {
|
|
|
|
scon->last_vm_running = runstate_is_running();
|
|
|
|
sdl_update_caption(scon);
|
|
|
|
}
|
|
|
|
|
|
|
|
while (SDL_PollEvent(ev)) {
|
|
|
|
switch (ev->type) {
|
|
|
|
case SDL_KEYDOWN:
|
2016-01-12 20:18:24 +01:00
|
|
|
idle = 0;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
handle_keydown(ev);
|
|
|
|
break;
|
|
|
|
case SDL_KEYUP:
|
2016-01-12 20:18:24 +01:00
|
|
|
idle = 0;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
handle_keyup(ev);
|
|
|
|
break;
|
2014-05-26 14:05:51 +02:00
|
|
|
case SDL_TEXTINPUT:
|
2016-01-12 20:18:24 +01:00
|
|
|
idle = 0;
|
2014-05-26 14:05:51 +02:00
|
|
|
handle_textinput(ev);
|
|
|
|
break;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
case SDL_QUIT:
|
2018-04-13 15:58:41 +02:00
|
|
|
if (scon->opts->has_window_close && !scon->opts->window_close) {
|
2018-02-02 12:10:15 +01:00
|
|
|
allow_close = false;
|
|
|
|
}
|
|
|
|
if (allow_close) {
|
2020-12-11 17:52:43 +01:00
|
|
|
shutdown_action = SHUTDOWN_ACTION_POWEROFF;
|
2017-05-15 23:41:13 +02:00
|
|
|
qemu_system_shutdown_request(SHUTDOWN_CAUSE_HOST_UI);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
case SDL_MOUSEMOTION:
|
2016-01-12 20:18:24 +01:00
|
|
|
idle = 0;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
handle_mousemotion(ev);
|
|
|
|
break;
|
|
|
|
case SDL_MOUSEBUTTONDOWN:
|
|
|
|
case SDL_MOUSEBUTTONUP:
|
2016-01-12 20:18:24 +01:00
|
|
|
idle = 0;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
handle_mousebutton(ev);
|
|
|
|
break;
|
2014-04-22 00:58:50 +02:00
|
|
|
case SDL_MOUSEWHEEL:
|
2016-01-12 20:18:24 +01:00
|
|
|
idle = 0;
|
2014-04-22 00:58:50 +02:00
|
|
|
handle_mousewheel(ev);
|
|
|
|
break;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
case SDL_WINDOWEVENT:
|
2014-12-12 10:52:51 +01:00
|
|
|
handle_windowevent(ev);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
2016-01-12 20:18:24 +01:00
|
|
|
|
|
|
|
if (idle) {
|
|
|
|
if (scon->idle_counter < SDL2_MAX_IDLE_COUNT) {
|
|
|
|
scon->idle_counter++;
|
|
|
|
if (scon->idle_counter >= SDL2_MAX_IDLE_COUNT) {
|
|
|
|
scon->dcl.update_interval = GUI_REFRESH_INTERVAL_DEFAULT;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
scon->idle_counter = 0;
|
|
|
|
scon->dcl.update_interval = SDL2_REFRESH_INTERVAL_BUSY;
|
|
|
|
}
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
static void sdl_mouse_warp(DisplayChangeListener *dcl,
|
|
|
|
int x, int y, int on)
|
|
|
|
{
|
2014-11-11 10:21:24 +01:00
|
|
|
struct sdl2_console *scon = container_of(dcl, struct sdl2_console, dcl);
|
2017-11-17 12:22:56 +01:00
|
|
|
|
|
|
|
if (!qemu_console_is_graphic(scon->dcl.con)) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
if (on) {
|
|
|
|
if (!guest_cursor) {
|
2020-01-31 12:35:21 +01:00
|
|
|
sdl_show_cursor(scon);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
2023-09-21 10:29:34 +02:00
|
|
|
if (gui_grab || qemu_input_is_absolute(scon->dcl.con) || absolute_enabled) {
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
SDL_SetCursor(guest_sprite);
|
2023-09-21 10:29:34 +02:00
|
|
|
if (!qemu_input_is_absolute(scon->dcl.con) && !absolute_enabled) {
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
SDL_WarpMouseInWindow(scon->real_window, x, y);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
} else if (gui_grab) {
|
2020-01-31 12:35:21 +01:00
|
|
|
sdl_hide_cursor(scon);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
|
|
|
guest_cursor = on;
|
|
|
|
guest_x = x, guest_y = y;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sdl_mouse_define(DisplayChangeListener *dcl,
|
|
|
|
QEMUCursor *c)
|
|
|
|
{
|
|
|
|
|
|
|
|
if (guest_sprite) {
|
|
|
|
SDL_FreeCursor(guest_sprite);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (guest_sprite_surface) {
|
|
|
|
SDL_FreeSurface(guest_sprite_surface);
|
|
|
|
}
|
|
|
|
|
|
|
|
guest_sprite_surface =
|
|
|
|
SDL_CreateRGBSurfaceFrom(c->data, c->width, c->height, 32, c->width * 4,
|
|
|
|
0xff0000, 0x00ff00, 0xff, 0xff000000);
|
|
|
|
|
|
|
|
if (!guest_sprite_surface) {
|
|
|
|
fprintf(stderr, "Failed to make rgb surface from %p\n", c);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
guest_sprite = SDL_CreateColorCursor(guest_sprite_surface,
|
|
|
|
c->hot_x, c->hot_y);
|
|
|
|
if (!guest_sprite) {
|
|
|
|
fprintf(stderr, "Failed to make color cursor from %p\n", c);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
if (guest_cursor &&
|
2023-09-21 10:29:34 +02:00
|
|
|
(gui_grab || qemu_input_is_absolute(dcl->con) || absolute_enabled)) {
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
SDL_SetCursor(guest_sprite);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sdl_cleanup(void)
|
|
|
|
{
|
|
|
|
if (guest_sprite) {
|
|
|
|
SDL_FreeCursor(guest_sprite);
|
|
|
|
}
|
|
|
|
SDL_QuitSubSystem(SDL_INIT_VIDEO);
|
|
|
|
}
|
|
|
|
|
2014-11-11 11:09:26 +01:00
|
|
|
static const DisplayChangeListenerOps dcl_2d_ops = {
|
2015-01-09 09:27:09 +01:00
|
|
|
.dpy_name = "sdl2-2d",
|
|
|
|
.dpy_gfx_update = sdl2_2d_update,
|
|
|
|
.dpy_gfx_switch = sdl2_2d_switch,
|
|
|
|
.dpy_gfx_check_format = sdl2_2d_check_format,
|
|
|
|
.dpy_refresh = sdl2_2d_refresh,
|
|
|
|
.dpy_mouse_set = sdl_mouse_warp,
|
|
|
|
.dpy_cursor_define = sdl_mouse_define,
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
};
|
|
|
|
|
2014-11-11 16:54:45 +01:00
|
|
|
#ifdef CONFIG_OPENGL
|
|
|
|
static const DisplayChangeListenerOps dcl_gl_ops = {
|
|
|
|
.dpy_name = "sdl2-gl",
|
|
|
|
.dpy_gfx_update = sdl2_gl_update,
|
|
|
|
.dpy_gfx_switch = sdl2_gl_switch,
|
|
|
|
.dpy_gfx_check_format = console_gl_check_format,
|
|
|
|
.dpy_refresh = sdl2_gl_refresh,
|
|
|
|
.dpy_mouse_set = sdl_mouse_warp,
|
|
|
|
.dpy_cursor_define = sdl_mouse_define,
|
2014-11-19 14:56:46 +01:00
|
|
|
|
2017-02-21 10:37:20 +01:00
|
|
|
.dpy_gl_scanout_disable = sdl2_gl_scanout_disable,
|
2017-02-21 10:37:16 +01:00
|
|
|
.dpy_gl_scanout_texture = sdl2_gl_scanout_texture,
|
2014-11-19 14:56:46 +01:00
|
|
|
.dpy_gl_update = sdl2_gl_scanout_flush,
|
2014-11-11 16:54:45 +01:00
|
|
|
};
|
2021-10-09 21:48:46 +02:00
|
|
|
|
2022-02-16 16:33:37 +01:00
|
|
|
static bool
|
|
|
|
sdl2_gl_is_compatible_dcl(DisplayGLCtx *dgc,
|
|
|
|
DisplayChangeListener *dcl)
|
|
|
|
{
|
|
|
|
return dcl->ops == &dcl_gl_ops;
|
|
|
|
}
|
|
|
|
|
2021-10-09 21:48:46 +02:00
|
|
|
static const DisplayGLCtxOps gl_ctx_ops = {
|
2022-02-16 16:33:37 +01:00
|
|
|
.dpy_gl_ctx_is_compatible_dcl = sdl2_gl_is_compatible_dcl,
|
2021-10-09 21:48:46 +02:00
|
|
|
.dpy_gl_ctx_create = sdl2_gl_create_context,
|
|
|
|
.dpy_gl_ctx_destroy = sdl2_gl_destroy_context,
|
|
|
|
.dpy_gl_ctx_make_current = sdl2_gl_make_context_current,
|
|
|
|
};
|
2014-11-11 16:54:45 +01:00
|
|
|
#endif
|
|
|
|
|
2018-03-01 11:05:36 +01:00
|
|
|
static void sdl2_display_early_init(DisplayOptions *o)
|
2014-11-11 16:54:45 +01:00
|
|
|
{
|
2018-02-02 12:10:15 +01:00
|
|
|
assert(o->type == DISPLAY_TYPE_SDL);
|
|
|
|
if (o->has_gl && o->gl) {
|
2014-11-11 16:54:45 +01:00
|
|
|
#ifdef CONFIG_OPENGL
|
|
|
|
display_opengl = 1;
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2018-03-01 11:05:36 +01:00
|
|
|
static void sdl2_display_init(DisplayState *ds, DisplayOptions *o)
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
{
|
|
|
|
uint8_t data = 0;
|
|
|
|
int i;
|
2016-12-21 01:38:06 +01:00
|
|
|
SDL_SysWMinfo info;
|
2019-01-10 13:00:47 +01:00
|
|
|
SDL_Surface *icon = NULL;
|
2020-08-18 11:59:27 +02:00
|
|
|
char *dir;
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
|
2018-02-02 12:10:15 +01:00
|
|
|
assert(o->type == DISPLAY_TYPE_SDL);
|
|
|
|
|
2023-02-15 15:27:46 +01:00
|
|
|
if (SDL_GetHintBoolean("QEMU_ENABLE_SDL_LOGGING", SDL_FALSE)) {
|
|
|
|
SDL_LogSetAllPriority(SDL_LOG_PRIORITY_VERBOSE);
|
|
|
|
}
|
|
|
|
|
2018-08-08 11:46:42 +02:00
|
|
|
if (SDL_Init(SDL_INIT_VIDEO)) {
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
fprintf(stderr, "Could not initialize SDL(%s) - exiting\n",
|
|
|
|
SDL_GetError());
|
|
|
|
exit(1);
|
|
|
|
}
|
2018-10-24 16:37:48 +02:00
|
|
|
#ifdef SDL_HINT_VIDEO_X11_NET_WM_BYPASS_COMPOSITOR /* only available since SDL 2.0.8 */
|
|
|
|
SDL_SetHint(SDL_HINT_VIDEO_X11_NET_WM_BYPASS_COMPOSITOR, "0");
|
|
|
|
#endif
|
2023-04-18 08:28:23 +02:00
|
|
|
#ifndef CONFIG_WIN32
|
2023-08-23 08:53:14 +02:00
|
|
|
/* QEMU uses its own low level keyboard hook procedure on Windows */
|
2014-11-11 12:02:50 +01:00
|
|
|
SDL_SetHint(SDL_HINT_GRAB_KEYBOARD, "1");
|
2023-04-18 08:28:23 +02:00
|
|
|
#endif
|
2023-04-17 21:21:38 +02:00
|
|
|
#ifdef SDL_HINT_ALLOW_ALT_TAB_WHILE_GRABBED
|
|
|
|
SDL_SetHint(SDL_HINT_ALLOW_ALT_TAB_WHILE_GRABBED, "0");
|
|
|
|
#endif
|
2023-04-17 21:21:39 +02:00
|
|
|
SDL_SetHint(SDL_HINT_WINDOWS_NO_CLOSE_ON_ALT_F4, "1");
|
2016-12-21 01:38:06 +01:00
|
|
|
memset(&info, 0, sizeof(info));
|
|
|
|
SDL_VERSION(&info.version);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
|
2018-07-09 20:44:10 +02:00
|
|
|
gui_fullscreen = o->has_full_screen && o->full_screen;
|
|
|
|
|
2022-05-19 17:56:24 +02:00
|
|
|
if (o->u.sdl.has_grab_mod) {
|
|
|
|
if (o->u.sdl.grab_mod == HOT_KEY_MOD_LSHIFT_LCTRL_LALT) {
|
|
|
|
alt_grab = true;
|
|
|
|
} else if (o->u.sdl.grab_mod == HOT_KEY_MOD_RCTRL) {
|
|
|
|
ctrl_grab = true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
for (i = 0;; i++) {
|
|
|
|
QemuConsole *con = qemu_console_lookup_by_index(i);
|
2014-05-26 14:05:51 +02:00
|
|
|
if (!con) {
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
sdl2_num_outputs = i;
|
2016-06-01 16:08:36 +02:00
|
|
|
if (sdl2_num_outputs == 0) {
|
|
|
|
return;
|
|
|
|
}
|
2014-11-11 10:21:24 +01:00
|
|
|
sdl2_console = g_new0(struct sdl2_console, sdl2_num_outputs);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
for (i = 0; i < sdl2_num_outputs; i++) {
|
|
|
|
QemuConsole *con = qemu_console_lookup_by_index(i);
|
2017-06-21 14:22:34 +02:00
|
|
|
assert(con != NULL);
|
2018-09-12 13:43:00 +02:00
|
|
|
if (!qemu_console_is_graphic(con) &&
|
|
|
|
qemu_console_get_index(con) != 0) {
|
2014-05-26 14:05:51 +02:00
|
|
|
sdl2_console[i].hidden = true;
|
|
|
|
}
|
2014-11-11 16:54:45 +01:00
|
|
|
sdl2_console[i].idx = i;
|
2018-05-15 07:45:01 +02:00
|
|
|
sdl2_console[i].opts = o;
|
2014-11-11 16:54:45 +01:00
|
|
|
#ifdef CONFIG_OPENGL
|
|
|
|
sdl2_console[i].opengl = display_opengl;
|
|
|
|
sdl2_console[i].dcl.ops = display_opengl ? &dcl_gl_ops : &dcl_2d_ops;
|
2021-10-09 21:48:46 +02:00
|
|
|
sdl2_console[i].dgc.ops = display_opengl ? &gl_ctx_ops : NULL;
|
2014-11-11 16:54:45 +01:00
|
|
|
#else
|
|
|
|
sdl2_console[i].opengl = 0;
|
2014-11-11 11:09:26 +01:00
|
|
|
sdl2_console[i].dcl.ops = &dcl_2d_ops;
|
2014-11-11 16:54:45 +01:00
|
|
|
#endif
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
sdl2_console[i].dcl.con = con;
|
2019-01-22 10:28:09 +01:00
|
|
|
sdl2_console[i].kbd = qkbd_state_init(con);
|
2021-01-25 12:10:36 +01:00
|
|
|
if (display_opengl) {
|
2021-10-09 21:48:46 +02:00
|
|
|
qemu_console_set_display_gl_ctx(con, &sdl2_console[i].dgc);
|
2021-01-25 12:10:36 +01:00
|
|
|
}
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
register_displaychangelistener(&sdl2_console[i].dcl);
|
2016-12-21 01:38:06 +01:00
|
|
|
|
2017-01-13 09:14:45 +01:00
|
|
|
#if defined(SDL_VIDEO_DRIVER_WINDOWS) || defined(SDL_VIDEO_DRIVER_X11)
|
2016-12-21 01:38:06 +01:00
|
|
|
if (SDL_GetWindowWMInfo(sdl2_console[i].real_window, &info)) {
|
2017-01-13 09:14:45 +01:00
|
|
|
#if defined(SDL_VIDEO_DRIVER_WINDOWS)
|
|
|
|
qemu_console_set_window_id(con, (uintptr_t)info.info.win.window);
|
|
|
|
#elif defined(SDL_VIDEO_DRIVER_X11)
|
2016-12-21 01:38:06 +01:00
|
|
|
qemu_console_set_window_id(con, info.info.x11.window);
|
2017-01-13 09:14:45 +01:00
|
|
|
#endif
|
2016-12-21 01:38:06 +01:00
|
|
|
}
|
2017-01-13 09:14:45 +01:00
|
|
|
#endif
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
|
|
|
|
2019-01-10 13:00:47 +01:00
|
|
|
#ifdef CONFIG_SDL_IMAGE
|
2020-08-18 11:59:27 +02:00
|
|
|
dir = get_relocated_path(CONFIG_QEMU_ICONDIR "/hicolor/128x128/apps/qemu.png");
|
|
|
|
icon = IMG_Load(dir);
|
2019-01-10 13:00:47 +01:00
|
|
|
#else
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
/* Load a 32x32x4 image. White pixels are transparent. */
|
2020-08-18 11:59:27 +02:00
|
|
|
dir = get_relocated_path(CONFIG_QEMU_ICONDIR "/hicolor/32x32/apps/qemu.bmp");
|
|
|
|
icon = SDL_LoadBMP(dir);
|
2019-01-10 13:00:47 +01:00
|
|
|
if (icon) {
|
|
|
|
uint32_t colorkey = SDL_MapRGB(icon->format, 255, 255, 255);
|
|
|
|
SDL_SetColorKey(icon, SDL_TRUE, colorkey);
|
|
|
|
}
|
|
|
|
#endif
|
2020-08-18 11:59:27 +02:00
|
|
|
g_free(dir);
|
2019-01-10 13:00:47 +01:00
|
|
|
if (icon) {
|
|
|
|
SDL_SetWindowIcon(sdl2_console[0].real_window, icon);
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
mouse_mode_notifier.notify = sdl_mouse_mode_change;
|
|
|
|
qemu_add_mouse_mode_change_notifier(&mouse_mode_notifier);
|
|
|
|
|
|
|
|
sdl_cursor_hidden = SDL_CreateCursor(&data, &data, 8, 1, 0, 0);
|
|
|
|
sdl_cursor_normal = SDL_GetCursor();
|
|
|
|
|
2020-05-16 09:20:10 +02:00
|
|
|
if (gui_fullscreen) {
|
|
|
|
sdl_grab_start(&sdl2_console[0]);
|
|
|
|
}
|
|
|
|
|
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-10 05:05:51 +01:00
|
|
|
atexit(sdl_cleanup);
|
|
|
|
}
|
2018-03-01 11:05:36 +01:00
|
|
|
|
|
|
|
static QemuDisplay qemu_display_sdl2 = {
|
|
|
|
.type = DISPLAY_TYPE_SDL,
|
|
|
|
.early_init = sdl2_display_early_init,
|
|
|
|
.init = sdl2_display_init,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void register_sdl1(void)
|
|
|
|
{
|
|
|
|
qemu_display_register(&qemu_display_sdl2);
|
|
|
|
}
|
|
|
|
|
|
|
|
type_init(register_sdl1);
|
2021-06-24 12:38:13 +02:00
|
|
|
|
|
|
|
#ifdef CONFIG_OPENGL
|
|
|
|
module_dep("ui-opengl");
|
|
|
|
#endif
|