qemu_strtosz() & friends reject NaNs, but happily accept infinities.
They shouldn't. Fix that.
The fix makes use of qemu_strtod_finite(). To avoid ugly casts,
change the @end parameter of qemu_strtosz() & friends from char **
to const char **.
Also, add two test cases, testing that "inf" and "NaN" are properly
rejected. While at it, also fixup the function documentation.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-3-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Let's provide a wrapper for strtod().
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-2-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Correct the nr of IRQs to 192.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181129163655.20370-5-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use IRQs 111 - 118 for virtio-mmio. The interrupts we're currently
using 160+ are not available in the Versal GIC.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181129163655.20370-4-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The two thing that should be handled are cipher and ivgen. For ivgen
the solution is just mutex, as iv calculations should not be long in
comparison with encryption/decryption. And for cipher let's just keep
per-thread ciphers.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Just like on other architectures, we should stop the clock while the guest
is not running. This is already properly done for TCG. Right now, doing an
offline migration (stop, migrate, cont) can easily trigger stalls in the
guest.
Even doing a
(hmp) stop
... wait 2 minutes ...
(hmp) cont
will already trigger stalls.
So whenever the guest stops, backup the KVM TOD. When continuing to run
the guest, restore the KVM TOD.
One special case is starting a simple VM: Reading the TOD from KVM to
stop it right away until the guest is actually started means that the
time of any simple VM will already differ to the host time. We can
simply leave the TOD running and the guest won't be able to recognize
it.
For migration, we actually want to keep the TOD stopped until really
starting the guest. To be able to catch most errors, we should however
try to set the TOD in addition to simply storing it. So we can still
catch basic migration problems.
If anything goes wrong while backing up/restoring the TOD, we have to
ignore it (but print a warning). This is then basically a fallback to
old behavior (TOD remains running).
I tested this very basically with an initrd:
1. Start a simple VM. Observed that the TOD is kept running. Old
behavior.
2. Ordinary live migration. Observed that the TOD is temporarily
stopped on the destination when setting the new value and
correctly started when finally starting the guest.
3. Offline live migration. (stop, migrate, cont). Observed that the
TOD will be stopped on the source with the "stop" command. On the
destination, the TOD is temporarily stopped when setting the new
value and correctly started when finally starting the guest via
"cont".
4. Simple stop/cont correctly stops/starts the TOD. (multiple stops
or conts in a row have no effect, so works as expected)
In the future, we might want to send the guest a special kind of time sync
interrupt under some conditions, so it can synchronize its tod to the
host tod. This is interesting for migration scenarios but also when we
get time sync interrupts ourselves. This however will most probably have
to be handled in KVM (e.g. when the tods differ too much) and is not
desired e.g. when debugging the guest (single stepping should not
result in permanent time syncs). I consider something like that an add-on
on top of this basic "don't break the guest" handling.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181130094957.4121-1-david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Out-of-band command execution was introduced in commit cf869d5317.
Unfortunately, we ran into a regression, and had to turn it into an
experimental option for 2.12 (commit be933ffc23).
http://lists.gnu.org/archive/html/qemu-devel/2018-03/msg06231.html
The regression has since been fixed (commit 951702f39c "monitor: bind
dispatch bh to iohandler context"). A thorough re-review of OOB
commands led to a few more issues, which have also been addressed.
This patch partly reverts be933ffc23 (monitor: new parameter "x-oob"),
and makes QMP monitors again offer capability "oob" whenever they can
provide it, i.e. when the monitor's character device is capable of
running in an I/O thread.
Some trivial touch-up in the test code is required to make sure qmp-test
won't break.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20181009062718.1914-4-peterx@redhat.com>
[Conflict with "monitor: check if chardev can switch gcontext for OOB"
resolved, commit message updated]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Clang 3.4 considers duplicate typedef in ppc4xx_i2c.h and
bitbang_i2c.h an error even if they are identical. Move it to a common
place to allow building with this clang version.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The code that used it has already been removed a while ago with commit
dc41aa7d34 ("tcg: Remove GET_TCGV_* and MAKE_TCGV_*").
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since we require GCC version 4.8 or newer now, we can be sure that
the builtin functions are always available on GCC. And for Clang,
we can check the availablility with __has_builtin instead.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When a QMP client sends in-band commands more quickly that we can
process them, we can either queue them without limit (QUEUE), drop
commands when the queue is full (DROP), or suspend receiving commands
when the queue is full (SUSPEND). None of them is ideal:
* QUEUE lets a misbehaving client make QEMU eat memory without bounds.
Not such a hot idea.
* With DROP, the client has to cope with dropped in-band commands. To
inform the client, we send a COMMAND_DROPPED event then. The event is
flawed by design in two ways: it's ambiguous (see commit d621cfe0a1),
and it brings back the "eat memory without bounds" problem.
* With SUSPEND, the client has to manage the flow of in-band commands to
keep the monitor available for out-of-band commands.
We currently DROP. Switch to SUSPEND.
Managing the flow of in-band commands to keep the monitor available for
out-of-band commands isn't really hard: just count the number of
"outstanding" in-band commands (commands sent minus replies received),
and if it exceeds the limit, hold back additional ones until it drops
below the limit again.
Note that we need to be careful pairing the suspend with a resume, or
else the monitor will hang, possibly forever. And here since we need to
make sure both:
(1) popping request from the req queue, and
(2) reading length of the req queue
will be in the same critical section, we let the pop function take the
corresponding queue lock when there is a request, then we release the
lock from the caller.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20181009062718.1914-2-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QEMU_CHAR_FEATURE_GCONTEXT declares the character device can switch
GMainContext.
Assert we don't switch context when the character device doesn't
provide this feature. Character device users must not violate this
restriction. In particular, user configurations that violate them
must be rejected.
Existing frontend that rely on context switching would now assert() if
the backend doesn't allow it (instead of silently producing undesired
events in the default context). Following patches improve the
situation by reporting an error earlier instead, on the frontend side.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181205203737.9011-4-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
-----BEGIN PGP SIGNATURE-----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=+od8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-patches-pull-request' into staging
Trivial patches (2018-12-11)
# gpg: Signature made Tue 11 Dec 2018 18:02:20 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-patches-pull-request: (30 commits)
Fixes i386 xchgq test
maint: Grammar fix to mailmap
MAINTAINERS: Update email address for Fam Zheng
cutils: Assert in-range base for string-to-integer conversions
util: vfio-helpers: use ARRAY_SIZE in qemu_vfio_init_pci()
target: hax: fix errors in comment
MAINTAINERS: Use my work email to review Build and test automation patches
MAINTAINERS: Add a missing entry for the NVDIMM device
MAINTAINERS: Add a missing entry to the QMP section
MAINTAINERS: Add a missing entry to SPICE
MAINTAINERS: Add missing entries for the MPS2 machine
MAINTAINERS: Add missing entries for the Canon DIGIC machine
MAINTAINERS: Add missing entries to the vhost section
MAINTAINERS: Add missing entries to the PC Chipset section
MAINTAINERS: Add a missing entry for the sun4m machines
MAINTAINERS: Add a missing entry for the Old World machines
MAINTAINERS: Add a missing entry for the Xilinx S3A-DSP 1800 machine
MAINTAINERS: Add missing entries for the Jazz machine
MAINTAINERS: Add missing entries for the Xilinx ZynqMP machine
MAINTAINERS: Add a missing entry to the SPARC CPU
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of trying to implement something that isn't well specified,
remove it. (it would be tricky to implement, since a class struct is
memcpy on children types...)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20181204142023.15982-7-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The function is only used by a test, move it there.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20181204142023.15982-6-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
global_props is only used for Xen xen_compat_props. It's a static
array of GlobalProperty, like machine globals in SET_MACHINE_COMPAT().
Let's register the globals the same way, without extra copy allocation.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20181204142023.15982-5-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of accepting any Object*, change user_creatable_complete() to
require a UserCreatable*. Modify the callers to pass the appropriate
argument, removing redundant dynamic cast checks in object creation.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20181204142023.15982-4-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Including all machine types that might have a pcie-root-port.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <154394083644.28192.8501647946108201466.stgit@gimli.home>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
[ehabkost: fixed accidental recursion at spapr_machine_3_1_class_options()]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There's no reason to violate our naming conventions by having a
struct with a different name than its typedef. Messed up since
its introduction in commit 8c85901e, but made more obvious when
commit 3bfe5716 promoted it to typedefs.h.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181115211752.1295571-3-eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This makes their function more clear and prevents conflicts when adding
the actual devices to the machine state, if necessary.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20181107152434.22219-1-minyard@acm.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
If there are no changes, let's use a const pointer.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181023152306.3123-4-david@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We try to detect and drop too large packet (>INT_MAX) in 1592a99470
("net: ignore packet size greater than INT_MAX") during packet
delivering. Unfortunately, this is not sufficient as we may hit
another integer overflow when trying to queue such large packet in
qemu_net_queue_append_iov():
- size of the allocation may overflow on 32bit
- packet->size is integer which may overflow even on 64bit
Fixing this by moving the check to qemu_sendv_packet_async() which is
the entrance of all networking codes and reduce the limit to
NET_BUFSIZE to be more conservative. This works since:
- For the callers that call qemu_sendv_packet_async() directly, they
only care about if zero is returned to determine whether to prevent
the source from producing more packets. A callback will be triggered
if peer can accept more then source could be enabled. This is
usually used by high speed networking implementation like virtio-net
or netmap.
- For the callers that call qemu_sendv_packet() that calls
qemu_sendv_packet_async() indirectly, they often ignore the return
value. In this case qemu will just the drop packets if peer can't
receive.
Qemu will copy the packet if it was queued. So it was safe for both
kinds of the callers to assume the packet was sent.
Since we move the check from qemu_deliver_packet_iov() to
qemu_sendv_packet_async(), it would be safer to make
qemu_deliver_packet_iov() static to prevent any external user in the
future.
This is a revised patch of CVE-2018-17963.
Cc: qemu-stable@nongnu.org
Cc: Li Qiang <liq3ea@163.com>
Fixes: 1592a99470 ("net: ignore packet size greater than INT_MAX")
Reported-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20181204035347.6148-2-jasowang@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because they are supposed to remain const.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GNUTLS takes a paranoid approach when seeing 0 bytes returned by the
underlying OS read() function. It will consider this an error and
return GNUTLS_E_PREMATURE_TERMINATION instead of propagating the 0
return value. It expects apps to arrange for clean termination at
the protocol level and not rely on seeing EOF from a read call to
detect shutdown. This is to harden apps against a malicious 3rd party
causing termination of the sockets layer.
This is unhelpful for the QEMU NBD code which does have a clean
protocol level shutdown, but still relies on seeing 0 from the I/O
channel read in the coroutine handling incoming replies.
The upshot is that when using a plain NBD connection shutdown is
silent, but when using TLS, the client spams the console with
Cannot read from TLS channel: Broken pipe
The NBD connection has, however, called qio_channel_shutdown()
at this point to indicate that it is done with I/O. This gives
the opportunity to optimize the code such that when the channel
has been shutdown in the read direction, the error code
GNUTLS_E_PREMATURE_TERMINATION gets turned into a '0' return
instead of an error.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181119134228.11031-1-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add the spapr cap SPAPR_CAP_NESTED_KVM_HV to be used to control the
availability of nested kvm-hv to the level 1 (L1) guest.
Assuming a hypervisor with support enabled an L1 guest can be allowed to
use the kvm-hv module (and thus run it's own kvm-hv guests) by setting:
-machine pseries,cap-nested-hv=true
or disabled with:
-machine pseries,cap-nested-hv=false
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The spapr-rng device is suboptimal when compared to virtio-rng, so
users might want to disable it in their builds. Thus let's introduce
a proper CONFIG switch to allow us to compile QEMU without this device.
The function spapr_rng_populate_dt is required for linking, so move it
to a different location.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add documentation for the qemu_thread_atexit_add() and
qemu_thread_atexit_remove() functions.
We include a (previously undocumented) constraint that notifiers
may not be called if a thread is exiting because the entire
process is exiting. This is fine for our current use because
the callers use it only for cleaning up resources which go away
on process exit (memory, Win32 fibers), and we will need the
flexibility for the new posix implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181105135538.28025-2-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Emulation of the block limits VPD page called back into scsi-disk.c,
which however expected the request to be for a SCSIDiskState and
accessed a scsi-generic device outside the bounds of its struct
(namely to retrieve s->max_unmap_size and s->max_io_size).
To avoid this, move the emulation code to a separate function that
takes a new SCSIBlockLimits struct and marshals it into the VPD
response format.
Reported-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new flag to mark memory region that are used as non-volatile, by
NVDIMM for example. That bit is propagated down to the flat view, and
reflected in HMP info mtree with a "nv-" prefix on the memory type.
This way, guest_phys_blocks_region_add() can skip the NV memory
regions for dumps and TCG memory clear in a following patch.
Cc: dgilbert@redhat.com
Cc: imammedo@redhat.com
Cc: pbonzini@redhat.com
Cc: guangrong.xiao@linux.intel.com
Cc: mst@redhat.com
Cc: xiaoguangrong.eric@gmail.com
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181003114454.5662-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'q35' machine type implements an Intel Series 3 chipset,
of which there are several variants:
https://www.intel.com/Assets/PDF/datasheet/316966.pdf
The key difference between the 82P35 MCH ('p35', PCI device ID 0x29c0)
and 82Q35 GMCH ('q35', PCI device ID 0x29b0) variants is that the latter
has an integrated graphics adapter. QEMU does not implement integrated
graphics, so uses the PCI ID for the 82P35 chipset, despite calling the
machine type 'q35'. Thus we rename the PCI device ID constant to reflect
reality, to avoid confusing future developers. The new name more closely
matches what pci.ids reports it to be:
$ grep P35 /usr/share/hwdata/pci.ids | grep 29
29c0 82G33/G31/P35/P31 Express DRAM Controller
29c1 82G33/G31/P35/P31 Express PCI Express Root Port
29c4 82G33/G31/P35/P31 Express MEI Controller
29c5 82G33/G31/P35/P31 Express MEI Controller
29c6 82G33/G31/P35/P31 Express PT IDER Controller
29c7 82G33/G31/P35/P31 Express Serial KT Controller
$ grep Q35 /usr/share/hwdata/pci.ids | grep 29
29b0 82Q35 Express DRAM Controller
29b1 82Q35 Express PCI Express Root Port
29b2 82Q35 Express Integrated Graphics Controller
29b3 82Q35 Express Integrated Graphics Controller
29b4 82Q35 Express MEI Controller
29b5 82Q35 Express MEI Controller
29b6 82Q35 Express PT IDER Controller
29b7 82Q35 Express Serial KT Controller
Arguably the QEMU machine type should be named 'p35'. At this point in
time, however, it is not worth the churn for management applications &
documentation to worry about renaming it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180830105757.10577-1-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD IOMMU VAPIC support + fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJb4IrKAAoJECgfDbjSjVRp9xEIAIT25r0SeThU32cl8955dBu3
L2q2e+4du4KcwrC1a65mhBeATFtRthL/cWFHf1rvmwsp1t6ib+uVBH/3ezH1b48o
rhrPjysYGbX+M/gxHv8uBM01JnMnmsaZVJv2iAifkO1fjJ5VCWXqJt89y7VryeUz
LRzN1Zzq84umDXUuqptBKI8MF8ySwqnRHCE6YrbpTAppaJRY8zIyWkQzMd+Ls9m/
Rwuo6QiySD4z5WrnL2hpvUCQw2qDTct9xDNrlGpxL1JVvOgo5Y5VFkF2X9IP7qap
TIC7Y9cfUjGNf8ferYsydgzpyTjFrBMUqqcu65HjUlpACXwwwrLHPScfpT37VJI=
=WPCi
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio: fixes, features
AMD IOMMU VAPIC support + fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 05 Nov 2018 18:24:10 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (33 commits)
vhost-scsi: prevent using uninitialized vqs
piix_pci: fix i440fx data sheet link
piix: use TYPE_FOO constants than string constats
i440fx: use ARRAY_SIZE for pam_regions
pci_bridge: fix typo in comment
hw/pci: Add missing include
hw/pci-bridge/ioh3420: Remove unuseful header
hw/pci-bridge/xio3130: Remove unused functions
tests/bios-tables-test: add 64-bit PCI MMIO aperture round-up test on Q35
bios-tables-test: prepare expected files for mmio64
hw/pci-host/x86: extend the 64-bit PCI hole relative to the fw-assigned base
hw/pci-host/x86: extract get_pci_hole64_start_value() helpers
pci-testdev: add optional memory bar
MAINTAINERS: list "tests/acpi-test-data" files in ACPI/SMBIOS section
x86_iommu/amd: Enable Guest virtual APIC support
x86_iommu/amd: Add interrupt remap support when VAPIC is enabled
i386: acpi: add IVHD device entry for IOAPIC
x86_iommu/amd: Add interrupt remap support when VAPIC is not enabled
x86_iommu/amd: Prepare for interrupt remap support
x86_iommu/amd: make the address space naming consistent with intel-iommu
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Noted while refactoring:
CC mips-softmmu/hw/mips/gt64xxx_pci.o
In file included from include/hw/pci-host/gt64xxx.h:2,
from hw/mips/gt64xxx_pci.c:30:
include/hw/pci/pci_bus.h:23:5: error: unknown type name ‘PCIIOMMUFunc’
PCIIOMMUFunc iommu_fn;
^~~~~~~~~~~~
include/hw/pci/pci_bus.h:27:5: error: unknown type name ‘pci_set_irq_fn’
pci_set_irq_fn set_irq;
^~~~~~~~~~~~~~
include/hw/pci/pci_bus.h:28:5: error: unknown type name ‘pci_map_irq_fn’
pci_map_irq_fn map_irq;
^~~~~~~~~~~~~~
include/hw/pci/pci_bus.h:29:5: error: unknown type name ‘pci_route_irq_fn’
pci_route_irq_fn route_intx_to_irq;
^~~~~~~~~~~~~~~~
include/hw/pci/pci_bus.h:31:24: error: ‘PCI_SLOT_MAX’ undeclared here (not in a function)
PCIDevice *devices[PCI_SLOT_MAX * PCI_FUNC_MAX];
^~~~~~~~~~~~
include/hw/pci/pci_bus.h:31:39: error: ‘PCI_FUNC_MAX’ undeclared here (not in a function)
PCIDevice *devices[PCI_SLOT_MAX * PCI_FUNC_MAX];
^~~~~~~~~~~~
make[1]: *** [rules.mak:69: hw/mips/gt64xxx_pci.o] Error 1
make: *** [Makefile:482: subdir-mips-softmmu] Error 2
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vtd_generate_msi_message() in intel-iommu is used to construct a MSI
Message from IRQ. A similar function will be needed when we add interrupt
remapping support in amd-iommu. Moving the function in common file to
avoid the code duplication. Rename it to x86_iommu_irq_to_msi_message().
There is no logic changes in the code flow.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Suggested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The lookup table for power-of-two sizes was added in commit 540b849261
for the purpose of having convenient shortcuts for these sizes in cases
when the literal number has to be present at compile time, and
expressions as '(1 * KiB)' can not be used. One such case is the
stringification of sizes. Beyond that, it is convenient to use these
shortcuts for all power-of-two sizes, even if they don't have to be
literal numbers.
Despite its convenience, this table introduced 55 lines of "dumb" code,
the purpose and origin of which are obscure without reading the message
of the commit which introduced it. This patch fixes that by adding a
comment to the code itself with a brief explanation for the reasoning
behind this table. This comment includes the short AWK script that
generated the table, so that anyone who's interested could make sure
that the values in it are correct (otherwise these values look as if
they were typed manually).
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds some whitespace into the option help (including indentation)
and puts angle brackets around the type names. Furthermore, the list
name is no longer printed as part of every line, but only once in
advance, and only if the caller did not print a caption already.
This patch also restores the description alignment we had before commit
9cbef9d68e, just at 24 instead of 16 characters like we used to.
This increase is because now we have the type and two spaces of
indentation before the description, and with a usual type name length of
three chracters, this sums up to eight additional characters -- which
means that we now need 24 characters to get the same amount of padding
for most options. Also, 24 is a third of 80, which makes it kind of a
round number in terminal terms.
Finally, this patch amends the reference output of iotest 082 to match
the changes (and thus makes it pass again).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some block drivers have traditionally changed their node to read-only
mode without asking the user. This behaviour has been marked deprecated
since 2.11, expecting users to provide an explicit read-only=on option.
Now that we have auto-read-only=on, enable these drivers to make use of
the option.
This is the only use of bdrv_set_read_only(), so we can make it a bit
more specific and turn it into a bdrv_apply_auto_read_only() that is
more convenient for drivers to use.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a management application builds the block graph node by node, the
protocol layer doesn't inherit its read-only option from the format
layer any more, so it must be set explicitly.
Backing files should work on read-only storage, but at the same time, a
block job like commit should be able to reopen them read-write if they
are on read-write storage. However, without option inheritance, reopen
only changes the read-only option for the root node (typically the
format layer), but not the protocol layer, so reopening fails (the
format layer wants to get write permissions, but the protocol layer is
still read-only).
A simple workaround for the problem in the management tool would be to
open the protocol layer always read-write and to make only the format
layer read-only for backing files. However, sometimes the file is
actually stored on read-only storage and we don't know whether the image
can be opened read-write (for example, for NBD it depends on the server
we're trying to connect to). This adds an option that makes QEMU try to
open the image read-write, but allows it to degrade to a read-only mode
without returning an error.
The documentation for this option is consciously phrased in a way that
allows QEMU to switch to a better model eventually: Instead of trying
when the image is first opened, making the read-only flag dynamic and
changing it automatically whenever the first BLK_PERM_WRITE user is
attached or the last one is detached would be much more useful
behaviour.
Unfortunately, this more useful behaviour is also a lot harder to
implement, and libvirt needs a solution now before it can switch to
-blockdev, so let's start with this easier approach for now.
Instead of adding a new auto-read-only option, turning the existing
read-only into an enum (with a bool alternate for compatibility) was
considered, but it complicated the implementation to the point that it
didn't seem to be worth it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The divdeu instruction was added to ISA 2.06 (Power7).
Exclude this block from older cpus.
Fixes: 27ae5109a2 (softfloat: Specialize udiv_qrnnd for ppc64)
Reported-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a model of Xilinx Versal SoC.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181102131913.1535-2-edgar.iglesias@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wire up nRF51 UART in the corresponding SoC.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Not implemented: CTS/NCTS, PSEL*.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* MSR-based feature support for
MSR_IA32_ARCH_CAPABILITIES bits (Robert Hoo)
* Cascadelake-Server CPU model (Tao Xu)
* Add PKU on Skylake-Server CPU model (Tao Xu)
* Correct cpu_x86_cpuid(0xd) (Sebastian Andrzej Siewior)
* Remove dead code (Peter Maydell)
-----BEGIN PGP SIGNATURE-----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=hWk7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging
x86 queue, 2018-10-30
* MSR-based feature support for
MSR_IA32_ARCH_CAPABILITIES bits (Robert Hoo)
* Cascadelake-Server CPU model (Tao Xu)
* Add PKU on Skylake-Server CPU model (Tao Xu)
* Correct cpu_x86_cpuid(0xd) (Sebastian Andrzej Siewior)
* Remove dead code (Peter Maydell)
# gpg: Signature made Wed 31 Oct 2018 14:05:25 GMT
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-next-pull-request:
i386: Add PKU on Skylake-Server CPU model
i386: Add new model of Cascadelake-Server
x86: define a new MSR based feature word -- FEATURE_WORDS_ARCH_CAPABILITIES
x86: Data structure changes to support MSR based features
kvm: Add support to KVM_GET_MSR_FEATURE_INDEX_LIST and KVM_GET_MSRS system ioctl
target/i386: Remove #ifdeffed-out icebp debugging hack
i386: correct cpu_x86_cpuid(0xd)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is essentially redundant with tlb_c.dirty.
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Especially for guests with large numbers of tlbs, like ARM or PPC,
we may well not use all of them in between flush operations.
Remember which tlbs have been used since the last flush, and
avoid any useless flushing.
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Our only statistic so far was "full" tlb flushes, where all mmu_idx
are flushed at the same time.
Now count "partial" tlb flushes where sets of mmu_idx are flushed,
but the set is not maximal. Account one per mmu_idx flushed, as
that is the unit of work performed.
We don't actually count elided flushes yet, but go ahead and change
the interface presented to the monitor all at once.
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The rest of the tlb victim cache is per-tlb,
the next use index should be as well.
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The set of large pages in the kernel is probably not the same
as the set of large pages in the application. Forcing one
range to cover both will flush more often than necessary.
This allows tlb_flush_page_async_work to flush just the one
mmu_idx implicated, which in turn allows us to remove
tlb_check_page_and_flush_by_mmuidx_async_work.
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Protect it with the tlb_lock instead of using atomics.
The move puts it in or near the same cacheline as the lock;
using the lock means we don't need a second atomic operation
in order to perform the update. Which makes it cheap to also
update pending_flush in tlb_flush_by_mmuidx_async_work.
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is the first of several moves to reduce the size of the
CPU_COMMON_TLB macro and improve some locality of refernce.
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As the release document ref below link (page 13):
https://software.intel.com/sites/default/files/managed/c5/15/\
architecture-instruction-set-extensions-programming-reference.pdf
PKU is supported in Skylake Server (Only Server) and later, and
on Intel(R) Xeon(R) Processor Scalable Family. So PKU is supposed
to be in Skylake-Server CPU model. And PKU's CPUID has been
exposed to QEMU. But PKU can't be find in Skylake-Server CPU
model in the code. So this patch will fix this issue in
Skylake-Server CPU model.
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <5014b57f834dcfa8fd3781504d98dcf063d54fde.1540801392.git.tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add kvm_get_supported_feature_msrs() to get supported MSR feature index list.
Add kvm_arch_get_supported_msr_feature() to get each MSR features value.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1539578845-37944-2-git-send-email-robert.hu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
-----BEGIN PGP SIGNATURE-----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=sHPv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request' into staging
QEMU trivial patches collected between June and October 2018
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
# gpg: Signature made Tue 30 Oct 2018 11:23:01 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request:
milkymist-minimac2: Use qemu_log_mask(GUEST_ERROR) instead of error_report
ppc: move at24c to its own CONFIG_ symbol
hw/intc/gicv3: Remove useless parenthesis around DIV_ROUND_UP macro
hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macro
tests/bios-tables-test: Remove an useless cast
xen: Use the PCI_DEVICE macro
qobject: Catch another straggler for use of qdict_put_str()
configure: Support pkg-config for zlib
tests: Fix typos in comments and help message (found by codespell)
cpu.h: fix a typo in comment
linux-user: fix comment s/atomic_write/atomic_set/
qemu-iotests: make 218 executable
scripts/qemu.py: remove trailing quotes on docstring
scripts/decodetree.py: remove unused imports
docs/devel/testing.rst: add missing newlines after code block
qemu-iotests: fix filename containing checks
tests/tcg/README: fix location for lm32 tests
memory.h: fix typos in comments
vga_int: remove unused function protype
configs/alpha: Remove unused CONFIG_PARALLEL_ISA switch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJb1yMkAAoJENSXKoln91plSrUIAIp8e63jdI/YX8gIp0iEVZmJ
+QDAfgTRc3/zvIFYie4A4mEnEj6c8iwmrvINalxQ+tZDtNcMLU8zI+0bz2YxwgiT
1YbVrhNPJxqx65YOqwEAQ/vjlCC3iVtTP6s6eKpR5MZRBLUWrkuEub6gDWpKxrK0
lfSRXS8Bj2gAOzefxeLIcFhBcV/z8hlRe7wxGpSjmPcJ36G3Bv28nyV+LbfmCsTb
QekIrEUtxlSqNJbb1apZHP1754mKURc43KoH6ZdXWXQWj2RedARltIfVxbprR0bK
huYwwSSl1fD7ltvJW1gXGYKdRABUbvTMeRsheA7YwGXlIjeQLOAnkwc8ZwQkidU=
=A7R3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-october-2018-part-4' into staging
MIPS queue for October 2018, part 4
# gpg: Signature made Mon 29 Oct 2018 15:11:32 GMT
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-october-2018-part-4: (27 commits)
linux-user: Add prctl() PR_SET_FP_MODE and PR_GET_FP_MODE implementations
linux-user: Determine the desired FPU mode from MIPS.abiflags
linux-user: Read and set FP ABI value from MIPS abiflags
linux-user: Extract MIPS abiflags from ELF file
linux-user: Extend image_info struct with MIPS fp_abi and interp_fp_abi fields
elf: Define MIPS_ABI_FP_UNKNOWN macro
target/mips: Amend MXU ASE overview note
target/mips: Move MXU_EN check one level higher
target/mips: Add emulation of MXU instructions S32LDD and S32LDDR
target/mips: Add emulation of MXU instructions Q8MUL and Q8MULSU
target/mips: Add emulation of MXU instruction D16MAC
target/mips: Add emulation of MXU instruction D16MUL
target/mips: Add emulation of MXU instruction S8LDD
target/mips: Move MUL, S32M2I, S32I2M handling out of main MXU switch
target/mips: Add emulation of MXU instructions S32I2M and S32M2I
target/mips: Add emulation of non-MXU MULL within MXU decoding engine
target/mips: Add bit encoding for MXU operand getting pattern 'optn3'
target/mips: Add bit encoding for MXU operand getting pattern 'optn2'
target/mips: Add bit encoding for MXU execute add/sub pattern 'eptn2'
target/mips: Add bit encoding for MXU accumulate add/sub 2-bit pattern 'aptn2'
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch aims to bring the following behavior:
1. We don't load bitmaps, when started in inactive mode. It's the case
of incoming migration. In this case we wait for bitmaps migration
through migration channel (if 'dirty-bitmaps' capability is enabled) or
for invalidation (to load bitmaps from the image).
2. We don't remove persistent bitmaps on inactivation. Instead, we only
remove bitmaps after storing. This is the only way to restore bitmaps,
if we decided to resume source after [failed] migration with
'dirty-bitmaps' capability enabled (which means, that bitmaps were not
stored).
3. We load bitmaps on open and any invalidation, it's ok for all cases:
- normal open
- migration target invalidation with dirty-bitmaps capability
(bitmaps are migrating through migration channel, the are not
stored, so they should have IN_USE flag set and will be skipped
when loading. However, it would fail if bitmaps are read-only[1])
- migration target invalidation without dirty-bitmaps capability
(normal load of the bitmaps, if migrated with shared storage)
- source invalidation with dirty-bitmaps capability
(skip because IN_USE)
- source invalidation without dirty-bitmaps capability
(bitmaps were dropped, reload them)
[1]: to accurately handle this, migration of read-only bitmaps is
explicitly forbidden in this patch.
New mechanism for not storing bitmaps when migrate with dirty-bitmaps
capability is introduced: migration filed in BdrvDirtyBitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Instead of both frozen and qmp_locked checks, wrap it into one check.
frozen implies the bitmap is split in two (for backup), and shouldn't
be modified. qmp_locked implies it's being used by another operation,
like being exported over NBD. In both cases it means we shouldn't allow
the user to modify it in any meaningful way.
Replace any usages where we check both frozen and qmp_locked with the
new check.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20181002230218.13949-2-jsnow@redhat.com
[w/edits Suggested-By: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>]
Signed-off-by: John Snow <jsnow@redhat.com>
Add backup parameter to bdrv_merge_dirty_bitmap() to be used then with
bdrv_restore_dirty_bitmap() if it needed to restore the bitmap after
merge operation.
This is needed to implement bitmap merge transaction action in further
commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Use more generic names to reuse the function for bitmap merge in the
following commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Add MIPS_ABI_FP_UNKNOWN as QEMU internal value to represent
unknown fp_abi (based on kernel mips/include/asm/elf.h definition)
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJb0iQKAAoJENSXKoln91plUngH/icGvr5sa6JbT/4bDP20Wv7y
gwJ8Ax6kKDU4Z/JbBt+2diXVRrPXCF6xt/dvcaWCnxKyjIZN0i2azHv75jtMEA5t
+khdqqREzTZ8RiEI+u0r+OkSNJ3837O+ahQFdRxjqSDIScC8mcwW8h1md9ThjzbQ
yBhRvNo8QkXGGx9MCWZ7kUGkPnJDQnL0jGiFj0xhtyDSGXfnnOpUgpQKRWu5cQzl
Q7JKFPQgt676kd6UyG7f+xYw/a6uERmMBWp30CfN6bP4bPcdFHdUlgIM60VRAfhA
qYA4led5sWcuqmA96PoZIOc+05/8Q8NkgP+nYbXeMkW8/9QOCPa/30p7QayOpZA=
=F4up
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-oct-2018-part-3' into staging
MIPS queue for October 2018 - part 3
# gpg: Signature made Thu 25 Oct 2018 21:14:02 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-oct-2018-part-3:
target/mips: Add disassembler support for nanoMIPS
target/mips: Implement emulation of nanoMIPS EVA instructions
target/mips: Add nanoMIPS CRC32 instruction pool
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Found by reading the code.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1536150548-2797-1-git-send-email-liq3ea@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add disassembler support for nanoMIPS.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Matthew Fortune <matthew.fortune@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
With the new memory device functions in place, we can factor out
unplugging of memory devices completely.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-16-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
With the new memory device functions in place, we can factor out
plugging of memory devices completely.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-15-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
With all required memory device class functions in place, we can factor
out pre_plug handling of memory devices. Take proper care of errors. We
still have to carry along legacy_align required for pc compatibility
handling.
We will factor out tracing of the address separately in a follow-up
patch.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-14-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To be able to factor out address assignment of memory devices, we will
have to read (get_addr()) and write (set_addr()) the address.
We can't use properties for this purpose, as properties are device
specific. E.g. while the address property for a DIMM is called "addr", it
might be called differently (e.g. "memaddr") for other devices.
Especially virtio based memory devices cannot use "addr" as that is already
reserved and used for the address on the bus (for the proxy device).
Also, it might be possible to have memory devices without address
properties (e.g. internal DIMM-like thingies).
In contrast to get_addr(), we expect that set_addr() can fail.
Keep it simple for now for pc-dimm and simply set the static property, that
will fail once realized.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-13-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There are no remaining users of get_region_size() except
memory_device_get_region_size() itself. We can make
memory_device_get_region_size() work directly on get_memory_region()
instead and drop get_region_size().
In addition, we can now use memory_device_get_region_size() in pc-dimm
code to implement get_plugged_size()"
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-12-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The memory region is necessary for plugging/unplugging a memory device.
The region size (via get_region_size()) is no longer sufficient, as
besides the alignment, also the region itself is required in order to
add it to the device memory region of the machine via
- memory_region_add_subregion
- memory_region_del_subregion
So, to factor out plugging/unplugging of memory devices from pc-dimm
code, we have to factor out access to the memory region first.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-11-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We will factor out get_memory_region() from pc-dimm to memory device code
soon. Once that is done, get_region_size() can be implemented
generically and essentially be replaced by
memory_device_get_region_size (and work only on get_memory_region()).
We have some users of get_memory_region() (spapr and pc-dimm code) that are
only interested in the size. So let's rework them to use
memory_device_get_region_size() first, then we can factor out
get_memory_region() and eventually remove get_region_size() without
touching the same code multiple times.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-10-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Document the functions. Don't document get_region_size(), as we will be
dropping/replacing that one soon.
Use same documentation style as in include/exec/memory.h, but don't
document the parameters, as they are self-explanatory.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-9-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's properly forward the errors, so errors from get_region_size() /
get_plugged_size() can be handled.
Users right now call both functions after the device has been realized,
which is will never fail, so it is fine to continue using error_abort.
While at it, remove a leftover error check (suggested by Igor).
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-8-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We're plugging/unplugging a PCDIMMDevice, so directly pass this type
instead of a more generic DeviceState.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-5-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
-----BEGIN PGP SIGNATURE-----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=kPZX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' into staging
Error reporting patches for 2018-10-22
# gpg: Signature made Mon 22 Oct 2018 13:20:23 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-2018-10-22: (40 commits)
error: Drop bogus "use error_setg() instead" admonitions
vpc: Fail open on bad header checksum
block: Clean up bdrv_img_create()'s error reporting
vl: Simplify call of parse_name()
vl: Fix exit status for -drive format=help
blockdev: Convert drive_new() to Error
vl: Assert drive_new() does not fail in default_drive()
fsdev: Clean up error reporting in qemu_fsdev_add()
spice: Clean up error reporting in add_channel()
tpm: Clean up error reporting in tpm_init_tpmdev()
numa: Clean up error reporting in parse_numa()
vnc: Clean up error reporting in vnc_init_func()
ui: Convert vnc_display_init(), init_keyboard_layout() to Error
ui/keymaps: Fix handling of erroneous include files
vl: Clean up error reporting in device_init_func()
vl: Clean up error reporting in parse_fw_cfg()
vl: Clean up error reporting in mon_init_func()
vl: Clean up error reporting in machine_set_property()
vl: Clean up error reporting in chardev_init_func()
qom: Clean up error reporting in user_creatable_add_opts_foreach()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In several places we use assert(FEATURE), and assume that if FEATURE
is disabled, all following code is removed as unreachable. Which allows
us to compile-out functions that are only present with FEATURE, and
have a link-time failure if the functions remain used.
MinGW does not mark its internal function _assert() as noreturn, so the
compiler cannot see when code is unreachable, which leads to link errors
for this host that are not present elsewhere.
The current build-time failure concerns 62823083b8, but I remember
having seen this same error before. Fix it once and for all for MinGW.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20181022181623.8810-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJbyUxzAAoJEO8Ells5jWIR24kIAKgKwm2Y4DU5vvaFVBzaK0/F
97aUnnXDGQ9FjBC6xG2Eo99fCRCbQ3AGHKlFR/sdPhK/5RaV6Zes7DJuYGlmE5wk
u+nieFDL3d+B3kmoJI2Uy2h2dQEtGwTGvLi+WnjrDteCIDAapiaN1ZWOnN5OvP3a
c903tU1l5oZsgr/4SGONXn86dw6JaWR8VD+GW6yFQgiB4+icGxMJrLTFTG2Ef4RG
5WFwqmFlTddTWWdcGDA+myLVLgakWwkxmFK75doeNDcNBjazZ+V8b0PH2Ph+aGXZ
9AGH2l8W2xPs1TLTJFUbya+2XnRbOTiFl6klVUZvDH3/74nY+kOVtPpljFjiBn0=
=AhoN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Fri 19 Oct 2018 04:16:03 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request: (26 commits)
qemu-options: Fix bad "macaddr" property in the documentation
e1000: indicate dropped packets in HW counters
net: ignore packet size greater than INT_MAX
pcnet: fix possible buffer overflow
rtl8139: fix possible out of bound access
ne2000: fix possible out of bound access in ne2000_receive
clean up callback when del virtqueue
docs: Add COLO status diagram to COLO-FT.txt
COLO: quick failover process by kick COLO thread
COLO: notify net filters about checkpoint/failover event
filter-rewriter: handle checkpoint and failover event
filter: Add handle_event method for NetFilterClass
COLO: flush host dirty ram from cache
savevm: split the process of different stages for loadvm/savevm
qapi: Add new command to query colo status
qapi/migration.json: Rename COLO unknown mode to none mode.
qmp event: Add COLO_EXIT event to notify users while exited COLO
COLO: Flush memory data from ram cache
ram/COLO: Record the dirty pages that SVM received
COLO: Load dirty pages into SVM's RAM cache firstly
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Calling error_report() from within a function that takes an Error **
argument is suspicious. drive_new() calls error_report() even though
it can run within drive_init_func(), which takes an Error ** argument.
drive_init_func()'s caller main(), via qemu_opts_foreach(), is fine
with it, but clean it up anyway:
* Convert drive_new() to Error
* Update add_init_drive() to report the error received from
drive_new()
* Make main() pass &error_fatal through qemu_opts_foreach(),
drive_init_func() to drive_new()
* Make default_drive() pass &error_abort through qemu_opts_foreach(),
drive_init_func() to drive_new()
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181017082702.5581-34-armbru@redhat.com>
Calling error_report() in a function that takes an Error ** argument
is suspicious. tpm_init_tpmdev() does that, and then fails without
setting an error. Its caller main(), via tpm_init() and
qemu_opts_foreach(), is fine with it, but clean it up anyway.
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20181017082702.5581-30-armbru@redhat.com>
Calling error_report() in a function that takes an Error ** argument
is suspicious. parse_numa() does that, and then fails without setting
an error. Its caller main(), via qemu_opts_foreach(), is fine with
it, but clean it up anyway.
While there, give parse_numa() internal linkage.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20181017082702.5581-29-armbru@redhat.com>
The previous commit changed vfio's warning messages from
vfio warning: DEV-NAME: Could not frobnicate
to
warning: vfio DEV-NAME: Could not frobnicate
To match this change, change error messages from
vfio error: DEV-NAME: On fire
to
vfio DEV-NAME: On fire
Note the loss of "error". If we think marking error messages that way
is a good idea, we should mark *all* error messages, i.e. make
error_report() print it.
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <20181017082702.5581-7-armbru@redhat.com>
The vfio code reports warnings like
error_report(WARN_PREFIX "Could not frobnicate", DEV-NAME);
where WARN_PREFIX is defined so the message comes out as
vfio warning: DEV-NAME: Could not frobnicate
This usage predates the introduction of warn_report() & friends in
commit 97f40301f1. It's time to convert to that interface. Since
these functions already prefix the message with "warning: ", replace
WARN_PREFIX by VFIO_MSG_PREFIX, so the messages come out like
warning: vfio DEV-NAME: Could not frobnicate
The next commit will replace ERR_PREFIX.
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-6-armbru@redhat.com>
From include/qapi/error.h:
* Pass an existing error to the caller with the message modified:
* error_propagate(errp, err);
* error_prepend(errp, "Could not frobnicate '%s': ", name);
Fei Li pointed out that doing error_propagate() first doesn't work
well when @errp is &error_fatal or &error_abort: the error_prepend()
is never reached.
Since I doubt fixing the documentation will stop people from getting
it wrong, introduce error_propagate_prepend(), in the hope that it
lures people away from using its constituents in the wrong order.
Update the instructions in error.h accordingly.
Convert existing error_prepend() next to error_propagate to
error_propagate_prepend(). If any of these get reached with
&error_fatal or &error_abort, the error messages improve. I didn't
check whether that's the case anywhere.
Cc: Fei Li <fli@suse.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-2-armbru@redhat.com>
qerror.h contains leftovers from the now-defunct QError API.
There's only a handful of string macros left, and no one is supposed
to add anything else. The check-qerror.sh script was used to make sure
that all definitions on the qerror.c and qerror.h files were sorted
alphabetically. The former was removed three years ago, and the latter
is now in a different location, so the script doesn't even work (as
a matter of fact the alphabetical order was broken last time someone
added a macro -also in 2015- and no one seemed to notice).
There's no point in fixing this script so let's just remove it.
The rogue macro is also moved to its correct location.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20181017151738.20299-1-berto@igalia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add handling of POST_MESSAGE hypercall. For that, add an interface to
regsiter a handler for the messages arrived from the guest on a
particular connection id (IOW set up a message connection in Hyper-V
speak).
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-10-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add handling of SIGNAL_EVENT hypercall. For that, provide an interface
to associate an EventNotifier with an event connection number, so that
it's signaled when the SIGNAL_EVENT hypercall with the matching
connection ID is called by the guest.
Support for using KVM functionality for this will be added in a followup
patch.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-8-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add infrastructure to signal SynIC event flags by atomically setting the
corresponding bit in the event flags page and firing a SINT if
necessary.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-7-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add infrastructure to deliver SynIC messages to the SynIC message page.
Note that KVM may also want to deliver (SynIC timer) messages to the
same message slot.
The problem is that the access to a SynIC message slot is controlled by
the value of its .msg_type field which indicates if the slot is being
owned by the hypervisor (zero) or by the guest (non-zero).
This leaves no room for synchronizing multiple concurrent producers.
The simplest way to deal with this for both KVM and QEMU is to only
deliver messages in the vcpu thread. KVM already does this; this patch
makes it for QEMU, too.
Specifically,
- add a function for posting messages, which only copies the message
into the staging buffer if its free, and schedules a work on the
corresponding vcpu to actually deliver it to the guest slot;
- instead of a sint ack callback, set up the sint route with a message
status callback. This function is called in a bh whenever there are
updates to the message slot status: either the vcpu made definitive
progress delivering the message from the staging buffer (succeeded or
failed) or the guest issued EOM; the status is passed as an argument
to the callback.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-6-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Certain configurations do not allow SynIC to be used in QEMU. In
particular,
- when hyperv_vpindex is off, SINT routes can't be used as they refer to
the destination vCPU by vp_index
- older KVM (which doesn't expose KVM_CAP_HYPERV_SYNIC2) zeroes out
SynIC message and event pages on every msr load, breaking migration
OTOH in-KVM users of SynIC -- SynIC timers -- do work in those
configurations, and we shouldn't stop the guest from using them.
To cover both scenarios, introduce an X86CPU property that makes CPU
init code to skip creation of the SynIC object (and thus disables any
SynIC use in QEMU) but keeps the KVM part of the SynIC working.
The property is clear by default but is set via compat logic for older
machine types.
As a result, when hv_synic and a modern machine type are specified, QEMU
will refuse to run unless vp_index is on and the kernel is recent
enough. OTOH with an older machine type QEMU will run fine with
hv_synic=on against an older kernel and/or without vp_index enabled but
will disallow the in-QEMU uses of SynIC (in e.g. VMBus).
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-4-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make Hyper-V SynIC a device which is attached as a child to a CPU. For
now it only makes SynIC visibile in the qom hierarchy, and maintains its
internal fields in sync with the respecitve msrs of the parent cpu (the
fields will be used in followup patches).
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-3-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A significant part of hyperv.c is not actually tied to x86, and can
be moved to hw/.
This will allow to maintain most of Hyper-V and VMBus
target-independent, and to avoid conflicts with inclusion of
arch-specific headers down the road in VMBus implementation.
Also this stuff can now be opt-out with CONFIG_HYPERV.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082041.29380-4-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some parts of the Hyper-V hypervisor-guest interface appear to be
target-independent, so move them into a proper header.
Not that Hyper-V ARM64 emulation is around the corner but it seems more
conveninent to have most of Hyper-V and VMBus target-independent, and
allows to avoid conflicts with inclusion of arch-specific headers down
the road in VMBus implementation.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082041.29380-2-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When [2] was fixed it was agreed that adding and calling post_plug()
callback after device_reset() was low risk approach to hotfix issue
right before release. So it was merged instead of moving already
existing plug() callback after device_reset() is called which would
be more risky and require all plug() callbacks audit.
Looking at the current plug() callbacks, it doesn't seem that moving
plug() callback after device_reset() is breaking anything, so here
goes agreed upon [3] proper fix which essentially reverts [1][2]
and moves plug() callback after device_reset().
This way devices always comes to plug() stage, after it's been fully
initialized (including being reset), which fixes race condition [2]
without need for an extra post_plug() callback.
1. (25e897881 "qdev: add HotplugHandler->post_plug() callback")
2. (8449bcf94 "virtio-scsi: fix hotplug ->reset() vs event race")
3. https://www.mail-archive.com/qemu-devel@nongnu.org/msg549915.html
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1539696820-273275-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Pierre Morel<pmorel@linux.ibm.com>
Acked-by: Pierre Morel<pmorel@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
accel_init_machine sets *(acc->allowed) to true if acc->init_machine(ms)
succeeds. There's no need to have both hvf_allowed and hvf_disabled.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20181018143051.48508-1-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adds EXTERNAL attribute definition to qemu timers subsystem and assigns
it to virtual clock timers, used in slirp (ICMP IPv6) and ui (key queue).
Virtual clock processing in rr mode can use this attribute instead of a
separate clock type.
Fixes: 87f4fe7653
Fixes: 775a412bf8
Fixes: 9888091404
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <e771f96ab94e86b54b9a783c974f2af3009fe5d1.1539764043.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Attributes are simple flags, associated with individual timers for their
whole lifetime. They intended to be used to mark individual timers for
special handling when they fire.
New/init functions family in timer interface updated and refactored (new
'attribute' argument added, timer_list replaced with timer_list_group+type
combinations, comments improved to avoid info duplication). Also existing
aio interface extended with attribute-enabled variants of functions,
which create/initialize timers.
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <f47b81dbce734e9806f9516eba8ca588e6321c2f.1539764043.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
That patch series introduced new virtual clock type for use in external
subsystems. It breaks desired behavior in non-record/replay usage
scenarios due to a small change to existing behavior. Processing of
virtual timers belonging to new clock type is kicked off to the main
loop, which makes these timers asynchronous with vCPU thread and,
in icount mode, with whole guest execution. This breaks expected
determinism in non-record/replay icount mode of emulation where these
"external subsystems" are isolated from the host (i.e. they are
external only to guest core, not to the entire emulation environment).
Example for slirp ("user" backend for network device):
User runs qemu in icount mode with rtc clock=vm without any external
communication interfaces but with "-netdev user,restrict=on". It expects
deterministic execution, because network services are emulated inside
qemu and isolated from host. There are no reasons to get reply from DHCP
server with different delay or something like that.
The next patches revert reimplements the same changes in a better way.
This reverts commit 87f4fe7653.
This reverts commit 775a412bf8.
This reverts commit 9888091404.
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <18b1e7c8f155fe26976f91be06bde98eef6f8751.1539764043.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Filter needs to process the event of checkpoint/failover or
other event passed by COLO frame.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We should not load PVM's state directly into SVM, because there maybe some
errors happen when SVM is receving data, which will break SVM.
We need to ensure receving all data before load the state into SVM. We use
an extra memory to cache these data (PVM's ram). The ram cache in secondary side
is initially the same as SVM/PVM's memory. And in the process of checkpoint,
we cache the dirty pages of PVM into this ram cache firstly, so this ram cache
always the same as PVM's memory at every checkpoint, then we flush this cached ram
to SVM after we receive all PVM's state.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We need to know if migration is going into COLO state for
incoming side before start normal migration.
Instead by using the VMStateDescription to send colo_state
from source side to destination side, we use MIG_CMD_ENABLE_COLO
to indicate whether COLO is enabled or not.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
While do checkpoint, we need to flush all the unhandled packets,
By using the filter notifier mechanism, we can easily to notify
every compare object to do this process, which runs inside
of compare threads as a coroutine.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
GCC7+ will no longer advertise support for 16-byte __atomic operations
if only cmpxchg is supported, as for x86_64. Fortunately, x86_64 still
has support for __sync_compare_and_swap_16 and we can make use of that.
AArch64 does not have, nor ever has had such support, so open-code it.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Isolate the computation of an index from an address into a
helper before we change that function.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[ cota: convert tlb_vaddr_to_host; use atomic_read on addr_write ]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181009175129.17888-2-cota@braap.org>
Currently we rely on atomic operations for cross-CPU invalidations.
There are two cases that these atomics miss: cross-CPU invalidations
can race with either (1) vCPU threads flushing their TLB, which
happens via memset, or (2) vCPUs calling tlb_reset_dirty on their TLB,
which updates .addr_write with a regular store. This results in
undefined behaviour, since we're mixing regular and atomic ops
on concurrent accesses.
Fix it by using tlb_lock, a per-vCPU lock. All updaters of tlb_table
and the corresponding victim cache now hold the lock.
The readers that do not hold tlb_lock must use atomic reads when
reading .addr_write, since this field can be updated by other threads;
the conversion to atomic reads is done in the next patch.
Note that an alternative fix would be to expand the use of atomic ops.
However, in the case of TLB flushes this would have a huge performance
impact, since (1) TLB flushes can happen very frequently and (2) we
currently use a full memory barrier to flush each TLB entry, and a TLB
has many entries. Instead, acquiring the lock is barely slower than a
full memory barrier since it is uncontended, and with a single lock
acquisition we can flush the entire TLB.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181009174557.16125-6-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Paves the way for the addition of a per-TLB lock.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181009174557.16125-4-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When we implemented per-vCPU TCG contexts, we forgot to also
distribute the tcg_time counter, which has remained as a global
accessed without any serialization, leading to potentially missed
counts.
Fix it by distributing the field over the TCG contexts, embedding
it into TCGProfile with a field called "cpu_exec_time", which is more
descriptive than "tcg_time". Add a function to query this value
directly, and for completeness, fill in the field in
tcg_profile_snapshot, even though its callers do not use it.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181010144853.13005-5-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Regarding R5900 CPU, some sources indicate that the Emotion Engine
ISA/ASE was designed by Toshiba and licensed to Sony. Others sources
claim it was a joint effort. It therefore makes sense to refer to
the CPU as "Toshiba/Sony R5900".
Also, remove and "'s" in the line for some other CPU, for the sake
of consistency.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reported-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add Mips_elf_abiflags_v0 structure to elf.h. The source of information
is kernel header arch/mips/include/asm/elf.h.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add MIPS_ABI_FP_XXX constants to elf.h. The source of information
is kernel header arch/mips/include/asm/elf.h.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fix existing and add missing PT_MIPS_XXX constants in elf.h.
This is copied from kernel header arch/mips/include/asm/elf.h.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
We've got three places already that provide a prototype for this
function in a .c file - that's ugly. Let's provide a proper prototype
in a header instead, with a proper description why this function should
not be used in most cases.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Older versions of Clang (before 3.5) and GCC (before 4.1) do not
support the "__attribute__((flatten))" yet. We don't care about
such old versions of GCC anymore, but since Clang 3.4 is still
used in EPEL for RHEL7 / CentOS 7, we should not use this attribute
directly but with a wrapper macro instead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add support for selecting the Memory Region that the GEM
will do DMA to.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181011021931.4249-7-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for extended descriptors with optional 64bit
addressing and timestamping. QEMU will not yet provide
timestamps (always leaving the valid timestamp bit as zero).
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-6-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add macro with max number of DMA descriptor words.
No functional change.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-5-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use uint32_t instead of unsigned to describe 32bit descriptor words.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-4-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the copyright date is set to 2017. Update the date to say
2018.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Up to now the vfio-platform device has been abstract and could not be
instantiated. The integration of a new vfio platform device required
creating a dummy derived device which only set the compatible string.
Following the few vfio-platform device integrations we have seen the
actual requested adaptation happens on device tree node creation
(sysbus-fdt).
Hence remove the abstract setting, and read the list of compatible
values from sysfs if not set by a derived device.
Update the amd-xgbe and calxeda-xgmac drivers to fill in the number of
compatible values, as there can now be more than one.
Note that sysbus-fdt does not support the instantiation of the
vfio-platform device yet.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
[geert: Rebase, set user_creatable=true, use compatible values in sysfs
instead of user-supplied manufacturer/model options, reword]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
So we have a boot display when using a vgpu as primary display.
ramfb depends on a fw_cfg file. fw_cfg files can not be added and
removed at runtime, therefore a ramfb-enabled vfio device can't be
hotplugged.
Add a nohotplug variant of the vfio-pci device (as child class). Add
the ramfb property to the nohotplug variant only. So to enable the vgpu
display with boot support use this:
-device vfio-pci-nohotplug,display=on,ramfb=on,sysfsdev=...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This also makes the default display resolution configurable,
via xres and yres properties. The default is 1024x768.
The old code had a hard-coded resolution of 1600x1200.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181005110837.28209-1-kraxel@redhat.com
GTK2 was deprecated in the 2.12.0 release with:
commit b7715af2b3
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Tue Dec 12 11:34:40 2017 +0000
ui: deprecate use of GTK 2.x in favour of 3.x series
The GTK 3.0 release was made in Feb, 2011:
https://blog.gtk.org/2011/02/10/gtk-3-0-released/
That will soon be 7 years ago, which is enough time to consider
the 3.x series widely supported.
Thus we deprecate the GTK 2.x support, which will allow us to
delete it in the last release of 2018. By this time, GTK 3.x
will be almost 8 years old.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171212113440.16483-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It is thus able to be removed in the 3.1.0 release.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180822131554.3398-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduces a VFIO based AP device. The device is defined via
the QEMU command line by specifying:
-device vfio-ap,sysfsdev=<path-to-mediated-matrix-device>
There may be only one vfio-ap device configured for a guest.
The mediated matrix device is created by the VFIO AP device
driver by writing a UUID to a sysfs attribute file (see
docs/vfio-ap.txt). The mediated matrix device will be named
after the UUID. Symbolic links to the $uuid are created in
many places, so the path to the mediated matrix device $uuid
can be specified in any of the following ways:
/sys/devices/vfio_ap/matrix/$uuid
/sys/devices/vfio_ap/matrix/mdev_supported_types/vfio_ap-passthrough/devices/$uuid
/sys/bus/mdev/devices/$uuid
/sys/bus/mdev/drivers/vfio_mdev/$uuid
When the vfio-ap device is realized, it acquires and opens the
VFIO iommu group to which the mediated matrix device is
bound. This causes a VFIO group notification event to be
signaled. The vfio_ap device driver's group notification
handler will get called at which time the device driver
will configure the the AP devices to which the guest will
be granted access.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20181010170309.12045-6-akrowiak@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[CH: added missing g_free and device category]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Introduces the base object model for virtualizing AP devices.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20181010170309.12045-5-akrowiak@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Update to kvm/next commit dd5bd0a65ff6 ("Merge tag 'kvm-s390-next-4.20-1'
of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD")
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The ISA has a 128/64-bit division instruction, though it assumes the
low 64-bits of the numerator are 0, and so requires a bit more fixup
than a full 128-bit division insn.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The ISA has a 128/64-bit division instruction.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The ISA has a 128/64-bit division instruction.
Tested-by: Emilio G. Cota <cota@braap.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The __udiv_qrnnd primitive that we nicked from gmp requires its
inputs to be normalized. We were not doing that. Because the
inputs are nearly normalized already, finishing that is trivial.
Replace div128to64 with a "proper" udiv_qrnnd, so that this
remains a reusable primitive.
Fixes: cf07323d49
Fixes: https://bugs.launchpad.net/qemu/+bug/1793119
Tested-by: Emilio G. Cota <cota@braap.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Our minimum required compiler for compiling QEMU is GCC 4.1 these days,
so we can drop the support for compilers which do not provide the
__builtin_clz*() functions yet. Since the countLeadingZeros32/64 are
then identical to the clz32/64 functions, and we do not have to sync
the softloat 2 codebase with upstream anymore (softloat 3 is a complete
rewrite) we can simply replace the functions with our QEMU versions.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1538118095-7003-1-git-send-email-thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It has not had users since f83311e476 ("target-m68k: use floatx80
internally", 2017-06-21).
Note that no other bit-width has floatX_trunc_to_int.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- fix several struct definitions so that sparc hosts do not trip over
unaligned accesses
- fence enabling huge pages for pre-3.1 machines
- sysbus init -> realize conversion
- fixes and improvements in tcg (instruction flags and AFP registers)
-----BEGIN PGP SIGNATURE-----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=0e7K
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20181004' into staging
Various s390x updates:
- fix several struct definitions so that sparc hosts do not trip over
unaligned accesses
- fence enabling huge pages for pre-3.1 machines
- sysbus init -> realize conversion
- fixes and improvements in tcg (instruction flags and AFP registers)
# gpg: Signature made Thu 04 Oct 2018 16:22:20 BST
# gpg: using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20181004:
hw/s390x/s390-pci-bus: Convert sysbus init function to realize function
s390x/tcg: refactor specification checking
s390x/tcg: fix FP register pair checks
s390x/tcg: handle privileged instructions via flags
s390x/tcg: check for AFP-register, BFP and DFP data exceptions
s390x/tcg: add instruction flags for floating point instructions
s390x/tcg: support flags for instructions
s390x/tcg: store in the TB flags if AFP is enabled
s390x/tcg: factor out and fix DATA exception injection
s390x: move tcg_s390_program_interrupt() into TCG code and mark it noreturn
target/s390x: exception on non-aligned LPSW(E)
s390x: Fence huge pages prior to 3.1
hw/s390x/ioinst: Fix alignment problem in struct SubchDev
hw/s390x/css: Remove QEMU_PACKED from struct SenseId
hw/s390x/ipl: Fix alignment problems of S390IPLState members
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix bugs in NBD_CMD_CACHE, drop support for oldstyle NBD server,
minor build and doc fixes
- Denis V. Lunev: nbd: fix NBD_CMD_CACHE negitiation... [retitled]
- Vladimir Sementsov-Ogievskiy: 0/2 server: drop old-style negotiation
- Eric Blake: qemu-nbd: Document --tls-creds
- Vladimir Sementsov-Ogievskiy: nbd/server: fix NBD_CMD_CACHE
- Peter Maydell: nbd: Don't take address of fields in packed structs
-----BEGIN PGP SIGNATURE-----
Comment: Public key at http://people.redhat.com/eblake/eblake.gpg
iQEcBAABCAAGBQJbtiF0AAoJEKeha0olJ0NqqgsH/RKL+SPl8S4xslZ8pTcXL2OW
AgMZInxKAe3MDX6NiCYFDWU4/32NNzPluWMh7DGu3mqFQiVySz9oAz2csZ4Fd5nm
NfY6Ewu64HF/REN7dNLfyrbmfzD3PdCUAa2PsasH1wzKArTklyfJH/QeOHbJ60H8
5AjthM/ksFNSAZXp+R+gzr2zGHN1cXwNBn87tKndPYaiIc95azPSZOnQpLLN9gfH
YwxCKk+opeEJNMuXf/PdkksbxqNxHsBCYSAL9NzjzS/+T8GIpHQAZvKGSk6FKDp+
x+KcC2pL7Lmu6iJWGIo5hGSSsBP1aXp0MJ/dUD+jo13LWNwzGFmovNI4pUuEK2A=
=0s7A
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-10-03-v2' into staging
nbd patches for 2018-10-03
Fix bugs in NBD_CMD_CACHE, drop support for oldstyle NBD server,
minor build and doc fixes
- Denis V. Lunev: nbd: fix NBD_CMD_CACHE negitiation... [retitled]
- Vladimir Sementsov-Ogievskiy: 0/2 server: drop old-style negotiation
- Eric Blake: qemu-nbd: Document --tls-creds
- Vladimir Sementsov-Ogievskiy: nbd/server: fix NBD_CMD_CACHE
- Peter Maydell: nbd: Don't take address of fields in packed structs
# gpg: Signature made Thu 04 Oct 2018 15:19:32 BST
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2018-10-03-v2:
nbd: fix NBD_FLAG_SEND_CACHE value
nbd/server: drop old-style negotiation
qemu-nbd: drop old-style negotiation
qemu-nbd: Document --tls-creds
nbd/server: fix NBD_CMD_CACHE
nbd: Don't take address of fields in packed structs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qdev_device_help() is used from command line "-device help", or from
HMP "device_add". If used from command line, print help to stdout
(it is only printed on explicit demand).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
"EMU" actually is "Emulex Corporation", so not a good idea to use that
by default. Lets use the Red Hat vendor id instead, which is in line
with the pci ids which are allocated from Red Hat vendor ids too.
Vendor list is available from http://www.uefi.org/pnp_id_list
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181005091934.12143-1-kraxel@redhat.com
If QEMU is compiled with clang-7 it results in the warning:
hw/display/qxl.c:1884:19: error: misaligned or large atomic operation
may incur significant performance penalty [-Werror,-Watomic-alignment]
old_pending = atomic_fetch_or(&d->ram->int_pending, le_events);
^
This is because the Spice headers forgot to define the QXLRam struct
with the '__aligned__(4)' attribute. clang 7 and newer will thus
warn that the access here to int_pending might not be 4-aligned
(because the QXLRam object d->ram points at might start at a
misaligned address). In fact we set up d->ram in init_qxl_ram() so
it always starts at a 4K boundary, so we know the atomic access here
is OK.
Newer Spice versions (with Spice commit
beda5ec7a6848be20c0cac2a9a8ef2a41e8069c1) will fix the bug;
for older Spice versions, work around it by telling the compiler
explicitly that the alignment is OK using __builtin_assume_aligned().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180927155538.699-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit bc37b06a5 added NBD_CMD_CACHE support, but used the wrong value
for NBD_FLAG_SEND_CACHE flag for negotiation. That commit picked bit 8,
which had already been assigned by the NBD specification to mean
NBD_FLAG_CAN_MULTI_CONN, and which was already implemented in the
Linux kernel as a part of stable userspace-kernel API since 4.10:
"bit 8, NBD_FLAG_CAN_MULTI_CONN: Indicates that the server operates
entirely without cache, or that the cache it uses is shared among all
connections to the given device. In particular, if this flag is
present, then the effects of NBD_CMD_FLUSH and NBD_CMD_FLAG_FUA
MUST be visible across all connections when the server sends its reply
to that command to the client. In the absense of this flag, clients
SHOULD NOT multiplex their commands over more than one connection to
the export.
...
bit 10, NBD_FLAG_SEND_CACHE: documents that the server understands
NBD_CMD_CACHE; however, note that server implementations exist
which support the command without advertising this bit, and
conversely that this bit does not guarantee that the command will
succeed or have an impact."
Consequences:
- a client trying to use NBD_CMD_CACHE per the NBD spec will not
see the feature as available from a qemu 3.0 server (not fatal,
clients already have to be prepared for caching to not exist)
- a client accidentally coded to the qemu 3.0 bit value instead
of following the spec may interpret NBD_CMD_CACHE as being available
when it is not (probably not fatal, the spec says the server should
gracefully fail unknown commands, and that clients of NBD_CMD_CACHE
should be prepared for failure even when the feature is advertised);
such clients are unlikely (perhaps only in unreleased Virtuozzo code),
and will disappear over time
- a client prepared to use multiple connections based on
NBD_FLAG_CAN_MULTI_CONN may cause data corruption when it assumes
that caching is consistent when in reality qemu 3.0 did not have
a consistent cache. Partially mitigated by using read-only
connections (where nothing needs to be flushed, so caching is
indeed consistent) or when using qemu-nbd with the default -e 1
(at most one client at a time); visible only when using -e 2 or
more for a writable export.
Thus the commit fixes negotiation flag in QEMU according to the
specification.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
CC: Valery Vdovin <valery.vdovin@acronis.com>
CC: Eric Blake <eblake@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: qemu-stable@nongnu.org
Message-Id: <20181004100313.4253-1-den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: enhance commit message, add defines for unimplemented flags]
Signed-off-by: Eric Blake <eblake@redhat.com>
As the kernel has no way of disallowing the start of a huge page
backed VM, we can migrate a running huge backed VM to a host that has
no huge page KVM support.
Let's glue huge page support support to the 3.1 machine, so we do not
migrate to a destination host that doesn't have QEMU huge page support
and can stop migration if KVM doesn't indicate support.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20180928093435.198573-1-frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
struct SubchDev embeds several other structures which are marked with
QEMU_PACKED. This causes the compiler to not care for proper alignment
of these structures. When we later pass around pointers to the unaligned
struct members during migration, this causes problems on host architectures
like Sparc that can not do unaligned memory access.
Most of the structs in ioinst.h are naturally aligned, so we can fix
most of the problem by removing the QEMU_PACKED statements (and use
QEMU_BUILD_BUG_MSG() statements instead to make sure that there is no
padding). However, for the struct SCHIB, we have to keep the QEMU_PACKED
since the compiler adds some padding here otherwise. Move this struct
to the beginning of struct SubchDev instead to fix the alignment problem
here, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1538036615-32542-4-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The uint16_t member cu_type of struct SenseId is not naturally aligned,
and since the struct is marked with QEMU_PACKED, this can lead to
unaligned memory accesses - which does not work on architectures like
Sparc. Thus remove the QEMU_PACKED here and rather copy the struct
byte by byte when we do copy_sense_id_to_guest().
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1538036615-32542-3-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
After the previous commit, nbd_client_new's first parameter is always
NULL. Let's drop it with all corresponding old-style negotiation code
path which is unreachable now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181003170228.95973-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: re-wrap short line]
Signed-off-by: Eric Blake <eblake@redhat.com>
This is mostly for readability of the code. Let's make it clear which
callers can create an implicit monitor when the chardev is muxed.
This will also enforce a safer behaviour, as we don't really support
creating monitor anywhere/anytime at the moment. Add an assert() to
make sure the programmer explicitely wanted that behaviour.
There are documented cases, such as: -serial/-parallel/-virtioconsole
and to less extent -debugcon.
Less obvious and questionable ones are -gdb, SLIRP -guestfwd and Xen
console. Add a FIXME note for those, but keep the support for now.
Other qemu_chr_new() callers either have a fixed parameter/filename
string or do not need it, such as -qtest:
* qtest.c: qtest_init()
Afaik, only used by tests/libqtest.c, without mux. I don't think we
support it outside of qemu testing: drop support for implicit mux
monitor (qemu_chr_new() call: no implicit mux now).
* hw/
All with literal @filename argument that doesn't enable mux monitor.
* tests/
All with @filename argument that doesn't enable mux monitor.
On a related note, the list of monitor creation places:
- the chardev creators listed above: all from command line (except
perhaps Xen console?)
- -gdb & hmp gdbserver will create a "GDB monitor command" chardev
that is wired to an HMP monitor.
- -mon command line option
From this short study, I would like to think that a monitor may only
be created in the main thread today, though I remain skeptical :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Fix up conformance to GTK-Doc function comment style, as documented in
https://developer.gnome.org/gtk-doc-manual/stable/documenting_symbols.html.en
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Now that all the users of old_mmio MemoryRegion accessors
have been converted, we can remove the core code support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180824170422.5783-2-peter.maydell@linaro.org>
Based-on: <20180802174042.29234-1-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before this change, memory-backend-file object is valid for Linux hosts
only because hostmem-file.c is compiled only on Linux hosts.
However, other POSIX-based hosts (such as macOS) can support
memory-backend-file object in the same way as on Linux hosts.
This patch makes hostmem-file.c and related functions to be compiled on
all POSIX-based hosts to make available memory-backend-file on them.
Signed-off-by: Hikaru Nishida <hikarupsp@gmail.com>
Message-Id: <20180924123205.29651-1-hikarupsp@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch moves definitions of Windows dump structures to
include/qemu/win_dump_defs.h to keep create_win_dump() prototype separate.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com>
Message-Id: <1535546488-30208-2-git-send-email-viktor.prutyanov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Slirp and VNC modules use virtual clock for processing some events that
are related to the guest execution speed.
But virtual clock-related events are consideres to be deterministic and
are recorded/replayed by icount mechanism. But slirp and VNC lie outside
the recorded guest core (which includes CPU and peripherals).
Therefore slirp and VNC are external for the guest, but should work at
guest speed.
This patch introduces new virtual clock which can be used for external
subsystems for running timers that are synchronized with the guest.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180912082002.3228.82417.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In record/replay icount mode vCPU thread and iothread synchronize
the execution using the checkpoints.
vCPU thread processes the virtual timers and iothread processes all others.
When iothread wants to wake up sleeping vCPU thread, it sends dummy queued
work. Therefore it could be the following sequence of the events in
record mode:
- IO: sending dummy work
- IO: processing timers
- CPU: wakeup
- CPU: clearing dummy work
- CPU: processing virtual timers
But due to the races in replay mode the sequence may change:
- IO: sending dummy work
- CPU: wakeup
- CPU: clearing dummy work
- CPU: sleeping again because nothing to do
- IO: Processing timers
- CPU: zzzz
In this case vCPU will not wake up, because dummy work is not to be set up
again.
This patch tries to wake up the vCPU when it sleeps and the icount warp
checkpoint isn't met. It means that vCPU has something to do, because
there are no other reasons of non-matching warp checkpoint.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
--
v5: improve checking that vCPU is still sleeping
Message-Id: <20180912081945.3228.19776.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously, if the size of initrd >=2G, qemu exits with error:
root@haswell-OptiPlex-9020:/home/lizj# /home/lizhijian/lkp/qemu-colo/x86_64-softmmu/qemu-system-x86_64 -kernel ./vmlinuz-4.16.0-rc4 -initrd large.cgz -nographic
qemu: error reading initrd large.cgz: No such file or directory
root@haswell-OptiPlex-9020:/home/lizj# du -sh large.cgz
2.5G large.cgz
this patch changes the caller side that use this function to calculate
size of initrd file as well.
v2: update error message and int64_t printing format
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-Id: <1536833233-14121-1-git-send-email-lizhijian@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Run some memfd-related checks before registering hostmem-memfd &
various properties. This will help libvirt to figure out what the host
is supposed to be capable of.
qemu_memfd_check() is changed to a less optimized version, since it is
used with various flags, it no longer caches the result.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180906161415.8543-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This introduces read/set accessors for int64_t and uint64_t.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180910232752.31565-3-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180903171831.15446-4-cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity does not see anymore that qemu_mutex_lock is taking a lock.
Hide all the QSP magic so that static analysis works again.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- qcow2 cache option default changes (Linux: 32 MB maximum, limited by
whatever cache size can be made use of with the specific image;
default cache-clean-interval of 10 minutes)
- reopen: Allow specifying unchanged child node references, and changing
a few generic options (discard, detect-zeroes)
- Fix werror/rerror defaults for -device drive=<node-name>
- Test case fixes
-----BEGIN PGP SIGNATURE-----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=ai81
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2 cache option default changes (Linux: 32 MB maximum, limited by
whatever cache size can be made use of with the specific image;
default cache-clean-interval of 10 minutes)
- reopen: Allow specifying unchanged child node references, and changing
a few generic options (discard, detect-zeroes)
- Fix werror/rerror defaults for -device drive=<node-name>
- Test case fixes
# gpg: Signature made Mon 01 Oct 2018 18:17:35 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (23 commits)
tests/test-bdrv-drain: Fix too late qemu_event_reset()
test-replication: Lock AioContext around blk_unref()
qcow2: Fix cache-clean-interval documentation
block-backend: Set werror/rerror defaults in blk_new()
qcow2: Explicit number replaced by a constant
qcow2: Set the default cache-clean-interval to 10 minutes
qcow2: Resize the cache upon image resizing
qcow2: Increase the default upper limit on the L2 cache size
qcow2: Assign the L2 cache relatively to the image size
qcow2: Avoid duplication in setting the refcount cache size
qcow2: Make sizes more humanly readable
include: Add a lookup table of sizes
qcow2: Options' documentation fixes
block: Allow changing 'detect-zeroes' on reopen
block: Allow changing 'discard' on reopen
file-posix: Forbid trying to change unsupported options during reopen
block: Forbid trying to change unsupported options during reopen
block: Allow child references on reopen
block: Don't look for child references in append_open_options()
block: Remove child references from bs->{options,explicit_options}
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adding a lookup table for the powers of two, with the appropriate size
prefixes. This is needed when a size has to be stringified, in which
case something like '(1 * KiB)' would become a literal '(1 * (1L << 10))'
string. Powers of two are used very often for sizes, so such a table
will also make it easier and more intuitive to write them.
This table is generatred using the following AWK script:
BEGIN {
suffix="KMGTPE";
for(i=10; i<64; i++) {
val=2**i;
s=substr(suffix, int(i/10), 1);
n=2**(i%10);
pad=21-int(log(n)/log(10));
printf("#define S_%d%siB %*d\n", n, s, pad, val);
}
}
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
'detect-zeroes' is one of the basic BlockdevOptions available for all
drivers, but it's not handled by bdrv_reopen_prepare(), so any attempt
to change it results in an error:
(qemu) qemu-io virtio0 "reopen -o detect-zeroes=on"
Cannot change the option 'detect-zeroes'
Since there's no reason why we shouldn't allow changing it and the
implementation is simple let's just do it.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Create a io region for an EDID data block.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180925075646.25114-4-kraxel@redhat.com
Helper function to figure the size of a edid blob, by checking how many
extensions are present. Both the base edid blob and the extensions are
128 bytes in size.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-3-kraxel@redhat.com
EDID is a metadata format to describe monitors. On physical hardware
the monitor has an eeprom with that data block which can be read over
i2c bus.
On a linux system you can usually find the EDID data block in
/sys/class/drm/$card/$connector/edid. xorg ships a edid-decode utility
which you can use to turn the blob into readable form.
I think it would be a good idea to use EDID for virtual displays too.
Needs changes in both qemu and guest kms drivers. This patch is the
first step, it adds an generator for EDID blobs to qemu. Comes with a
qemu-edid test tool included.
With EDID we can pass more information to the guest. Names and serial
numbers, so the guests display configuration has no boring "Unknown
Monitor". List of video modes. Display resolution, pretty important
in case we want add HiDPI support some day.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-2-kraxel@redhat.com
seqlock_read_begin takes a const param since c04649eeea
("seqlock: constify seqlock_read_begin", 2018-08-23), so
we can constify the entire lookup.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Accessing the HT from an iterator results almost always
in a deadlock. Given that only one qht-internal function
uses this argument, drop it from the interface.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This currently has no users, but the use case is so common that I
think we must support it.
Note that without the appended we cannot safely remove a set of
elements; a 2-step approach (i.e. qht_iter first, keep track of
the to-be-deleted elements, and then a bunch of qht_remove calls)
would be racy, since between the iteration and the removals other
threads might insert additional elements.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Deprecate the "enforce-config-section" machine parameter
- Re-enable the wdt_ib700, endianness and vmxnet3 qtests
- Some trivial fixes and doc update patches that crossed my way
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=dXgp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2018-09-25' into staging
- Deprecate the usage of a network backend via "name" instead of "id"
- Deprecate the "enforce-config-section" machine parameter
- Re-enable the wdt_ib700, endianness and vmxnet3 qtests
- Some trivial fixes and doc update patches that crossed my way
# gpg: Signature made Tue 25 Sep 2018 16:58:42 BST
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>"
# gpg: aka "Thomas Huth <thuth@redhat.com>"
# gpg: aka "Thomas Huth <huth@tuxfamily.org>"
# gpg: aka "Thomas Huth <th.huth@posteo.de>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2018-09-25:
Revert "check: Move VMXNET3 test to common"
Revert "check: Move endianess test to common"
Revert "check: Move wdt_ib700 test to common"
tests/migration: Speed up the test on ppc64
hw/qdev-core: Fix description of instance_init
qdev: fix a typo in comment
docs: Fix some typos (most found by codespell)
trivial: Make bios files and source files non-executable
memfd: fix possible usage of the uninitialized file descriptor
hw/core/machine: Officially deprecate the enforce-config-section parameter
net/slirp: Deprecate the [hub_id name] parameter tuple
net: Deprecate the "name" parameter of -net
Makefile: Add missing dependency for qemu-deprecated.texi
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Drain fixes
- node-name parameters for block-commit
- Refactor block jobs to use transactional callbacks for exiting
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbqlBsAAoJEPQH2wBh1c9ABCQIAJ4adAAlr65kmcktHrOeQc6A
7VwSSCUa9B8BJS+/H3V8XF3eX1fa016cRQCHfH/ua3Wqavw00qcuS8Bz/ggc6qls
S1kNSSGhemvtf6ebTCN++HCxEg8g1RjsdnxaTiNWrYLKadX5kjLGofU1eAM2J/re
k5YsyB01X4RHS2L0eAUbYGgNFs+UJEU4p0aKGBPHsOj1LIYEzFhDTVNJ8OjNUG9R
mcMXFiYmQpJTV0hlIqL+pOtRvlR9YOKgkO8dmFkRe+z82f+GA+EZhLfpACxc7ilQ
HS4V2NMVucZ7G8gGudg9mqvd3u/AV5BiUtIGd0iIQ9pU9fUuPVPl977i5WHewoM=
=3TQt
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/xanclic/tags/pull-block-2018-09-25' into staging
Block layer patches:
- Drain fixes
- node-name parameters for block-commit
- Refactor block jobs to use transactional callbacks for exiting
# gpg: Signature made Tue 25 Sep 2018 16:12:44 BST
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/xanclic/tags/pull-block-2018-09-25: (42 commits)
test-bdrv-drain: Test draining job source child and parent
block: Use a single global AioWait
test-bdrv-drain: Fix outdated comments
test-bdrv-drain: AIO_WAIT_WHILE() in job .commit/.abort
job: Avoid deadlocks in job_completed_txn_abort()
test-bdrv-drain: Test nested poll in bdrv_drain_poll_top_level()
block: Remove aio_poll() in bdrv_drain_poll variants
blockjob: Lie better in child_job_drained_poll()
block-backend: Decrease in_flight only after callback
block-backend: Fix potential double blk_delete()
block-backend: Add .drained_poll callback
block: Add missing locking in bdrv_co_drain_bh_cb()
test-bdrv-drain: Test AIO_WAIT_WHILE() in completion callback
job: Use AIO_WAIT_WHILE() in job_finish_sync()
test-blockjob: Acquire AioContext around job_cancel_sync()
test-bdrv-drain: Drain with block jobs in an I/O thread
aio-wait: Increase num_waiters even in home thread
blockjob: Wake up BDS when job becomes idle
job: Fix missing locking due to mismerge
job: Fix nested aio_poll() hanging in job_txn_apply
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The part of the documentation of DeviceClass that talks about instance_init
is partly wrong: instance_init() functions must not abort or exit, since
the function is also called during introspection of the device already.
So if a device calls exit() during its instance_init() function, QEMU
terminates unexpectedly if somebody tries to just have a look at the
interfaces from the device with "device_add xyz,help" or with the
"device-list-properties" QOM command. This should never happen.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The code looks better, it removes duplicated lines and it will ease
the introduction of common properties for the Aspeed machines.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180921161939.822-4-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In file included from /home/thuth/devel/qemu/hw/timer/aspeed_timer.c:16:
/home/thuth/devel/qemu/include/hw/misc/aspeed_scu.h:37:3: error:
redefinition of typedef 'AspeedSCUState' is a C11 feature
[-Werror,-Wtypedef-redefinition]
} AspeedSCUState;
^
/home/thuth/devel/qemu/include/hw/timer/aspeed_timer.h:27:31: note:
previous definition is here
typedef struct AspeedSCUState AspeedSCUState;
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180921161939.822-2-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GICv2's QEMU interface (sysbus MMIO regions, IRQs,
etc) is now quite complicated with the addition of the
virtualization extensions. Add a comment in the header
file which documents it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180823103818.31189-1-peter.maydell@linaro.org
When draining a block node, we recurse to its parent and for subtree
drains also to its children. A single AIO_WAIT_WHILE() is then used to
wait for bdrv_drain_poll() to become true, which depends on all of the
nodes we recursed to. However, if the respective child or parent becomes
quiescent and calls bdrv_wakeup(), only the AioWait of the child/parent
is checked, while AIO_WAIT_WHILE() depends on the AioWait of the
original node.
Fix this by using a single AioWait for all callers of AIO_WAIT_WHILE().
This may mean that the draining thread gets a few more unnecessary
wakeups because an unrelated operation got completed, but we already
wake it up when something _could_ have changed rather than only if it
has certainly changed.
Apart from that, drain is a slow path anyway. In theory it would be
possible to use wakeups more selectively and still correctly, but the
gains are likely not worth the additional complexity. In fact, this
patch is a nice simplification for some places in the code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Block jobs claim in .drained_poll() that they are in a quiescent state
as soon as job->deferred_to_main_loop is true. This is obviously wrong,
they still have a completion BH to run. We only get away with this
because commit 91af091f92 added an unconditional aio_poll(false) to the
drain functions, but this is bypassing the regular drain mechanisms.
However, just removing this and telling that the job is still active
doesn't work either: The completion callbacks themselves call drain
functions (directly, or indirectly with bdrv_reopen), so they would
deadlock then.
As a better lie, tell that the job is active as long as the BH is
pending, but falsely call it quiescent from the point in the BH when the
completion callback is called. At this point, nested drain calls won't
deadlock because they ignore the job, and outer drains will wait for the
job to really reach a quiescent state because the callback is already
running.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
bdrv_do_drained_begin/end() assume that they are called with the
AioContext lock of bs held. If we call drain functions from a coroutine
with the AioContext lock held, we yield and schedule a BH to move out of
coroutine context. This means that the lock for the home context of the
coroutine is released and must be re-acquired in the bottom half.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
All callers in QEMU proper hold the AioContext lock when calling
job_finish_sync(). test-blockjob should do the same when it calls the
function indirectly through job_cancel_sync().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Even if AIO_WAIT_WHILE() is called in the home context of the
AioContext, we still want to allow the condition to change depending on
other threads as long as they kick the AioWait. Specfically block jobs
can be running in an I/O thread and should then be able to kick a drain
in the main loop context.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
In the context of draining a BDS, the .drained_poll callback of block
jobs is called. If this returns true (i.e. there is still some activity
pending), the drain operation may call aio_poll() with blocking=true to
wait for completion.
As soon as the pending activity is completed and the job finally arrives
in a quiescent state (i.e. its coroutine either yields with busy=false
or terminates), the block job must notify the aio_poll() loop to wake
up, otherwise we get a deadlock if both are running in different
threads.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Now that all of the jobs use the component finalization callbacks,
there's no use for the heavy-hammer .exit callback anymore.
job_exit becomes a glorified type shim so that we can call
job_completed from aio_bh_schedule_oneshot.
Move these three functions down into job.c to eliminate a
forward reference.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180906130225.5118-12-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add support for taking and passing forward job creation flags.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180906130225.5118-4-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add support for taking and passing forward job creation flags.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180906130225.5118-3-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add support for taking and passing forward job creation flags.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180906130225.5118-2-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The nRF51 is a Cortex-M0 microcontroller with an on-board radio module,
plus other common ARM SoC peripherals.
http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf
This defines a basic model of the CPU and memory, with no peripherals
implemented at this stage.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-id: 20180831220920.27113-3-joel@jms.id.au
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: wrapped a few long lines]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here are the accumulated ppc target patches for the last several
weeks. Highlights are:
* A number of 40p / PReP cleanups
* Preliminary irq rework on the pseries machine towards the new
XIVE interrupt controller
There are a few patches which make small changes to generic device and
arm code as prerequisites to the 40p interrupt routing cleanup. They
have acks from the relevant maintainers.
-----BEGIN PGP SIGNATURE-----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=A62f
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180925' into staging
ppc patch queue 2018-09-25
Here are the accumulated ppc target patches for the last several
weeks. Highlights are:
* A number of 40p / PReP cleanups
* Preliminary irq rework on the pseries machine towards the new
XIVE interrupt controller
There are a few patches which make small changes to generic device and
arm code as prerequisites to the 40p interrupt routing cleanup. They
have acks from the relevant maintainers.
# gpg: Signature made Tue 25 Sep 2018 08:00:06 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.1-20180925:
40p: add fixed IRQ routing for LSI SCSI device
lsi53c895a: add optional external IRQ via qdev
scsi: remove unused lsi53c895a_create() and lsi53c810_create() functions
scsi: move lsi53c8xx_create() callers to lsi53c8xx_handle_legacy_cmdline()
scsi: add lsi53c8xx_handle_legacy_cmdline() function
sm501: Adjust endianness of pixel value in rectangle fill
spapr_pci: add an extra 'nr_msis' argument to spapr_populate_pci_dt
spapr: increase the size of the IRQ number space
spapr: introduce a spapr_irq class 'nr_msis' attribute
40p: use OR gate to wire up raven PCI interrupts
raven: some minor IRQ-related tidy-ups
hw/ppc: on 40p machine, change default firmware to OpenBIOS
target/ppc/cpu-models: Re-group the 970 CPUs together again
Record history of ppcemb target in common.json
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that these functions are no longer required they can be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is the function that will soon be used to replace lsi53c895a_create() and
lsi53c810_create().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
So that we don't have to call qdev_get_machine() to get the machine
class and the sPAPRIrq backend holding the number of MSIs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The new layout using static IRQ number does not leave much space to
the dynamic MSI range, only 0x100 IRQ numbers. Increase the total
number of IRQS for newer machines and introduce a legacy XICS backend
for pre-3.1 machines to maintain compatibility.
For the old backend, provide a 'nr_msis' value covering the full IRQ
number space as it does not use the bitmap allocator to allocate MSI
interrupt numbers.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The number of MSI interrupts a sPAPR machine can allocate is in direct
relation with the number of interrupts of the sPAPRIrq backend. Define
statically this value at the sPAPRIrq class level and use it for the
"ibm,pe-total-#msi" property of the sPAPR PHB.
According to the PAPR specs, "ibm,pe-total-#msi" defines the maximum
number of MSIs that are available to the PE. We choose to advertise
the maximum number of MSIs that are available to the machine for
simplicity of the model and to avoid segmenting the MSI interrupt pool
which can be easily shared. If the pool limit is reached, it can be
extended dynamically.
Finally, remove XICS_IRQS_SPAPR which is now unused.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Here's another pull request for qemu-3.1. No real theme here, just an
assortment of various fixes. Probably the most notable thing is the
removal of the ppcemb target which has been deprecated for some time
now.
-----BEGIN PGP SIGNATURE-----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=WnE4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180907' into staging
ppc patch queue 2018-09-07
Here's another pull request for qemu-3.1. No real theme here, just an
assortment of various fixes. Probably the most notable thing is the
removal of the ppcemb target which has been deprecated for some time
now.
# gpg: Signature made Fri 07 Sep 2018 08:30:02 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.1-20180907:
target-ppc: Extend HWCAP2 bits for ISA 3.0
target/ppc/kvm: set vcpu as online/offline
Fix a deadlock case in the CPU hotplug flow
spapr: Correct reference count on spapr-cpu-core
mac_newworld: implement custom FWPathProvider
uninorth: add ofw-addr property to allow correct fw path generation
mac_oldworld: implement custom FWPathProvider
grackle: set device fw_name and address for correct fw path generation
macio: add addr property to macio IDE object
macio: add macio bus to help with fw path generation
macio: move MACIOIDEState type declarations to macio.h
spapr_pci: fix potential NULL pointer dereference
spapr: fix leak of rev array
ppc: Remove deprecated ppcemb target
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAluQU38ACgkQIeENKd+X
cFRAXQgAlhNcwby+Jsk8sbLajMWXEtww9FIv+XESldPOJHmJyCkNDVZX8MuMM7+f
8NraD3YGDJvXP/BEcmyE5yPC6mx+OIi8ufzqP0rUML1x4+Tpxp8nZ7sBH197RtGg
eImPA6oKvg4wyfNOrZ+hGa8HF/iMT03TqeKggUPf3dVAs8LV2iUwBIzrRLB4IhIN
yFnhbcw8cW04tWUhYg4+viDY2k0q7fMrJZkASD/RjGMBjubJkwWvSYOdMIEWSpcG
2qLT5SohzUzHyKPONsoBKjSIP+nKgtyYR6IJh40FDd5S5RRMHe/n3q9jChIkHMma
x1eSNvVd41++QlBKqDeAlA+gbdK/uw==
=FJn/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-pullreq-20180905' into staging
A misc collection of RISC-V related patches for 3.1.
# gpg: Signature made Wed 05 Sep 2018 23:06:55 BST
# gpg: using RSA key 21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-pullreq-20180905:
riscv: remove define cpu_init()
hw/riscv/spike: Set the soc device tree node as a simple-bus
hw/riscv/virtio: Set the soc device tree node as a simple-bus
target/riscv: call gen_goto_tb on DISAS_TOO_MANY
target/riscv: optimize indirect branches
target/riscv: optimize cross-page direct jumps in softmmu
RISC-V: Simplify riscv_cpu_local_irqs_pending
RISC-V: Use atomic_cmpxchg to update PLIC bitmaps
RISC-V: Improve page table walker spec compliance
RISC-V: Update address bits to support sv39 and sv48
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
{error,warn}_report_once() are a special case of the new functions
and can simply switch to them.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20180830145902.27376-3-cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Dispense with unlikely() to keep the macros as simple as possible]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add two functions to print an error/warning report once depending
on a passed-in condition variable and flip it if printed. This is
useful if you want to print a message not once-globally, but e.g.
once-per-device.
Inspired by warn_once() in hw/vfio/ccw.c, which has been replaced
with warn_report_once_cond().
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20180830145902.27376-2-cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Function comments reworded]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Factor "bus_reserve", "io_reserve", "mem_reserve", "pref32_reserve"
and "pref64_reserve" fields of the "GenPCIERootPort" structure out
to "PCIResReserve" structure, so that other PCI bridges can
reuse it to add resource reserve capability.
Signed-off-by: Jing Liu <jing2.liu@linux.intel.com>
Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The PLIC previously used a mutex to protect against concurrent
access to the claimed and pending bitfields. Instead of using
a mutex, we update the bitfields using atomic_cmpxchg.
Rename sifive_plic_num_irqs_pending to sifive_plic_irqs_pending
and add an early out if any interrupts are pending as the
count of pending interrupts is not used.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
No functional change, just preparation for a followup patch
which needs a VirtIOGPU pointer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20180829122101.29852-2-kraxel@redhat.com>
Now that the job infrastructure is handling the job_completed call for
all implemented jobs, we can remove the interface that allowed jobs to
schedule their own completion.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180830015734.19765-10-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Jobs are now expected to return their retcode on the stack, from the
.run callback, so we can remove that argument.
job_cancel does not need to set -ECANCELED because job_completed will
update the return code itself if the job was canceled.
While we're here, make job_completed static to job.c and remove it from
job.h; move the documentation of return code to the .run() callback and
to the job->ret property, accordingly.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20180830015734.19765-9-jsnow@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
All jobs do the same thing when they leave their running loop:
- Store the return code in a structure
- wait to receive this structure in the main thread
- signal job completion via job_completed
Few jobs do anything beyond exactly this. Consolidate this exit
logic for a net reduction in SLOC.
More seriously, when we utilize job_defer_to_main_loop_bh to call
a function that calls job_completed, job_finalize_single will run
in a context where it has recursively taken the aio_context lock,
which can cause hangs if it puts down a reference that causes a flush.
You can observe this in practice by looking at mirror_exit's careful
placement of job_completed and bdrv_unref calls.
If we centralize job exiting, we can signal job completion from outside
of the aio_context, which should allow for job cleanup code to run with
only one lock, which makes cleanup callbacks less tricky to write.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180830015734.19765-4-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Jobs presently use both an Error object in the case of the create job,
and char strings in the case of generic errors elsewhere.
Unify the two paths as just j->err, and remove the extra argument from
job_completed. The integer error code for job_completed is kept for now,
to be removed shortly in a separate patch.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20180830015734.19765-3-jsnow@redhat.com
[mreitz: Dropped a superfluous g_strdup()]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Presently we codify the entry point for a job as the "start" callback,
but a more apt name would be "run" to clarify the idea that when this
function returns we consider the job to have "finished," except for
any cleanup which occurs in separate callbacks later.
As part of this clarification, change the signature to include an error
object and a return code. The error ptr is not yet used, and the return
code while captured, will be overwritten by actions in the job_completed
function.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180830015734.19765-2-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
These options likely do not work as expected as soon as the user
tries to use more than one network interface at once. The parameters
have been marked as deprecated since QEMU v2.6, so users had plenty
of time to move their scripts to the new syntax. Time to remove the
old parameters now.
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit 93f874fe9d.
Now with virtio-vga being resetted properly the
crash workaround is not needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180821111313.27792-3-kraxel@redhat.com
We must call the reset functions for both virtio-gpu
and vga to properly reset the combo device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180821111313.27792-2-kraxel@redhat.com
This contains the offset of the IDE controller within the macio address space
and is required to allow the address to be included within the fw path.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As the in-built IDE controller is attached to the macio bus then we should also
model this the same in QEMU to aid fw path generation.
Note that all existing macio devices are moved onto the new macio bus so that
the qdev tree accurately reflects the real hardware.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The generated qapi_event_send_FOO() take an Error ** argument. They
can't actually fail, because all they do with the argument is passing it
to functions that can't fail: the QObject output visitor, and the
@qmp_emit callback, which is either monitor_qapi_event_queue() or
event_test_emit().
Drop the argument, and pass &error_abort to the QObject output visitor
and @qmp_emit instead.
Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815133747.25032-4-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten, update to qapi-code-gen.txt corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There is no known available OS for ppc around anymore that uses page
sizes below 4k, so it does not make much sense that we keep wasting
our time on building and testing the ppcemb-softmmu target. It has
been deprecated since two releases, and nobody complained, so let's
remove this now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
vhost-user-gpu will share the same code to open a DRM node.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180713130916.4153-20-marcandre.lureau@redhat.com>
[ kraxel: buildfix: util/drm.o must be CONFIG_OPENGL not CONFIG_LINUX ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are many error_report()s that can be used in frequently called
functions, especially on IO paths. That can be unideal in that
malicious guest can try to trigger the error tons of time which might
use up the log space on the host (e.g., libvirt can capture the stderr
of QEMU and put it persistently onto disk). In VT-d emulation code, we
have trace_vtd_error() tracer. AFAIU all those places can be replaced
by something like error_report() but trace points are mostly used to
avoid the DDOS attack that mentioned above. However using trace points
mean that errors are not dumped if trace not enabled.
It's not a big deal in most modern server managements since we have
things like logrotate to maintain the logs and make sure the quota is
expected. However it'll still be nice that we just provide another way
to restrict message generations. In most cases, this kind of
error_report()s will only provide valid information on the first message
sent, and all the rest of similar messages will be mostly talking about
the same thing. This patch introduces *_report_once() helpers to allow
a message to be dumped only once during one QEMU process's life cycle.
It will make sure: (1) it's on by deffault, so we can even get something
without turning the trace on and reproducing, and (2) it won't be
affected by DDOS attack.
To implement it, I stole the printk_once() macro from Linux.
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815095328.32414-2-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Whitespace adjusted, comments improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbgCm7AAoJENSXKoln91plhJYH/jRqbCaUd04nGuyjOaYUajTL
brz3JD0XN2jD6NnDYUpuiNzawSojNzSklMA0u9AJiG+cpNK+gqW4fX+CYeX7ApjK
99+SXSejxnK3IJUNblQDD/hdCv9Dc1r12R7c80lm+aqJwi4C8hfULTbfrse/QdyA
KIHKl+c3uaWTPG2qC3mpPW/QS+IRPgRRwF/7GILuiagNmMcXyuMd2fQuePnf1rvD
ztTdtNJ0zfdFK1jlLa7D9Xe36RpS1uBinF429dNwXWM/+i1shvxc3Enzb4qEQNYe
ZeVxTomP/nO1elLZYdVUwdQYr6vmnvb1/mtTT6nq0NvHeLGjMZMqOBWGuAtdXoo=
=a8Jv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-aug-2018' into staging
MIPS queue August 2018 v6
# gpg: Signature made Fri 24 Aug 2018 16:52:27 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-aug-2018: (45 commits)
target/mips: Add definition of nanoMIPS I7200 CPU
mips_malta: Fix semihosting argument passing for nanoMIPS bare metal
mips_malta: Add setting up GT64120 BARs to the nanoMIPS bootloader
mips_malta: Add basic nanoMIPS boot code for Malta board
elf: Don't check FCR31_NAN2008 bit for nanoMIPS
elf: On elf loading, treat both EM_MIPS and EM_NANOMIPS as legal for MIPS
elf: Relax MIPS' elf_check_arch() to accept EM_NANOMIPS too
elf: Add EM_NANOMIPS value as a valid one for e_machine field
target/mips: Fix ERET/ERETNC behavior related to ADEL exception
target/mips: Add updating BadInstr and BadInstrX for nanoMIPS
target/mips: Add availability control via bit NMS
target/mips: Add emulation of DSP ASE for nanoMIPS - part 6
target/mips: Add emulation of DSP ASE for nanoMIPS - part 5
target/mips: Add emulation of DSP ASE for nanoMIPS - part 4
target/mips: Add emulation of DSP ASE for nanoMIPS - part 3
target/mips: Add emulation of DSP ASE for nanoMIPS - part 2
target/mips: Add emulation of DSP ASE for nanoMIPS - part 1
target/mips: Implement MT ASE support for nanoMIPS
target/mips: Fix pre-nanoMIPS MT ASE instructions availability control
target/mips: Add emulation of nanoMIPS 32-bit branch instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The JSON parser has three public headers, json-lexer.h, json-parser.h,
json-streamer.h. They all contain stuff that is of no interest
outside qobject/json-*.c.
Collect the public interface in include/qapi/qmp/json-parser.h, and
everything else in qobject/json-parser-int.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-54-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-53-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-52-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-51-armbru@redhat.com>
json_message_process_token() accumulates tokens until it got the
sequence of tokens that comprise a single JSON value (it counts curly
braces and square brackets to decide). It feeds those token sequences
to json_parser_parse(). If a non-empty sequence of tokens remains at
the end of the parse, it's silently ignored. check-qjson.c cases
unterminated_array(), unterminated_array_comma(), unterminated_dict(),
unterminated_dict_comma() demonstrate this bug.
Fix as follows. Introduce a JSON_END_OF_INPUT token. When the
streamer receives it, it feeds the accumulated tokens to
json_parser_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-46-armbru@redhat.com>
The callback to consume JSON values takes QObject *json, Error *err.
If both are null, the callback is supposed to make up an error by
itself. This sucks.
qjson.c's consume_json() neglects to do so, which makes
qobject_from_json() null instead of failing. I consider that a bug.
The culprit is json_message_process_token(): it passes two null
pointers when it runs into a lexical error or a limit violation. Fix
it to pass a proper Error object then. Update the callbacks:
* monitor.c's handle_qmp_command(): the code to make up an error is
now dead, drop it.
* qga/main.c's process_event(): lumps the "both null" case together
with the "not a JSON object" case. The former is now gone. The
error message "Invalid JSON syntax" is misleading for the latter.
Improve it to "Input must be a JSON object".
* qobject/qjson.c's consume_json(): no update; check-qjson
demonstrates qobject_from_json() now sets an error on lexical
errors, but still doesn't on some other errors.
* tests/libqtest.c's qmp_response(): the Error object is now reliable,
so use it to improve the error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-40-armbru@redhat.com>
The JSON parser optionally supports interpolation. The lexer
recognizes interpolation tokens unconditionally. The parser rejects
them when interpolation is disabled, in parse_interpolation().
However, it neglects to set an error then, which can make
json_parser_parse() fail without setting an error.
Move the check for unwanted interpolation from the parser's
parse_interpolation() into the lexer's finite state machine. When
interpolation is disabled, '%' is now handled like any other
unexpected character.
The next commit will improve how such lexical errors are handled.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-39-armbru@redhat.com>
The JSON parser optionally supports interpolation. The code calls it
"escape". Awkward, because it uses the same term for escape sequences
within strings. The latter usage is consistent with RFC 8259 "The
JavaScript Object Notation (JSON) Data Interchange Format" and ISO C.
Call the former "interpolation" instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-38-armbru@redhat.com>
The classical way to structure parser and lexer is to have the client
call the parser to get an abstract syntax tree, the parser call the
lexer to get the next token, and the lexer call some function to get
input characters.
Another way to structure them would be to have the client feed
characters to the lexer, the lexer feed tokens to the parser, and the
parser feed abstract syntax trees to some callback provided by the
client. This way is more easily integrated into an event loop that
dispatches input characters as they arrive.
Our JSON parser is kind of between the two. The lexer feeds tokens to
a "streamer" instead of a real parser. The streamer accumulates
tokens until it got the sequence of tokens that comprise a single JSON
value (it counts curly braces and square brackets to decide). It
feeds those token sequences to a callback provided by the client. The
callback passes each token sequence to the parser, and gets back an
abstract syntax tree.
I figure it was done that way to make a straightforward recursive
descent parser possible. "Get next token" becomes "pop the first
token off the token sequence". Drawback: we need to store a complete
token sequence. Each token eats 13 + input characters + malloc
overhead bytes.
Observations:
1. This is not the only way to use recursive descent. If we replaced
"get next token" by a coroutine yield, we could do without a
streamer.
2. The lexer reports errors by passing a JSON_ERROR token to the
streamer. This communicates the offending input characters and
their location, but no more.
3. The streamer reports errors by passing a null token sequence to the
callback. The (already poor) lexical error information is thrown
away.
4. Having the callback receive a token sequence duplicates the code to
convert token sequence to abstract syntax tree in every callback.
5. Known bug: the streamer silently drops incomplete token sequences.
This commit rectifies 4. by lifting the call of the parser from the
callbacks into the streamer. Later commits will address 3. and 5.
The lifting removes a bug from qjson.c's parse_json(): it passed a
pointer to a non-null Error * in certain cases, as demonstrated by
check-qjson.c.
json_parser_parse() is now unused. It's a stupid wrapper around
json_parser_parse_err(). Drop it, and rename json_parser_parse_err()
to json_parser_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-35-armbru@redhat.com>
json_lexer_init() takes the function to process a token as an
argument. It's always json_message_process_token(). Makes the code
harder to understand for no actual gain. Drop the indirection.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-34-armbru@redhat.com>
The lexer always returns 0 when char feeding. Furthermore, none of the
caller care about the return value.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180326150916.9602-10-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180823164025.12553-32-armbru@redhat.com>
We reject bytes that can't occur in valid UTF-8 (\xC0..\xC1,
\xF5..\xFF in the lexer. That's insufficient; there's plenty of
invalid UTF-8 not containing these bytes, as demonstrated by
check-qjson:
* Malformed sequences
- Unexpected continuation bytes
- Missing continuation bytes after start bytes other than
\xC0..\xC1, \xF5..\xFD.
* Overlong sequences with start bytes other than \xC0..\xC1,
\xF5..\xFD.
* Invalid code points
Fixing this in the lexer would be bothersome. Fixing it in the parser
is straightforward, so do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-23-armbru@redhat.com>
Modify load_elf32()/load_elf64() to treat EM_NANOMIPS as legal as
EM_MIPS is.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Value 249 is registered as valid for usage for nanoMIPS executables.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
-----BEGIN PGP SIGNATURE-----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=GExd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20180822-1' into staging
migration/next for 20180822
# gpg: Signature made Wed 22 Aug 2018 12:07:59 BST
# gpg: using RSA key F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration/20180822-1:
migration: hold the lock only if it is really needed
migration: move handle of zero page to the thread
migration: drop the return value of do_compress_ram_page
migration: introduce save_zero_page_to_file
migration: fix counting normal page for compression
migration: do not wait for free thread
migration: poll the cm event for destination qemu
tests/migration-test: Silence the kvm_hv message by default
migration: implement the shutdown for RDMA QIOChannel
migration: poll the cm event while wait RDMA work request completion
migration: invoke qio_channel_yield only when qemu_in_coroutine()
migration: implement io_set_aio_fd_handler function for RDMA QIOChannel
migration: Stop rdma yielding during incoming postcopy
migration: implement bi-directional RDMA QIOChannel
migration: create a dedicated connection for rdma return path
migration: disable RDMA WRITE after postcopy started
migrate/cpu-throttle: Add max-cpu-throttle migration parameter
docs/migration: Clarify pre_load in subsections
migration: Correctly handle subsections with no 'needed' function
qapi/migration.json: fix the description for "query-migrate" output
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=2bke
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/check/20180822' into staging
check/next for 20180822
# gpg: Signature made Wed 22 Aug 2018 09:03:40 BST
# gpg: using RSA key F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/check/20180822:
check: Only test tpm devices when they are compiled in
check: Only test usb-ehci when it is compiled in
check: Only test usb-uhci devices when they are compiled in
check: Only test usb-ohci when it is compiled in
check: Only test nvme when it is compiled in
check: Only test pvpanic when it is compiled in
check: Only test wdt_ib700 when it is compiled in
check: Only test sdhci when it is compiled in
check: Only test i82801b11 when it is compiled in
check: Only test ioh3420 when it is compiled in
check: Only test ipack when it is compiled in
check: Only test hda when it is compiled in
check: Only test ac97 when it is compiled in
check: Only test es1370 when it is compiled in
check: Only test rtl8139 when it is compiled in
check: Only test pcnet when it is compiled in
check: Only test eepro100 when it is compiled in
check: Only test ne2000 when it is compiled in
check: Only test vmxnet3 when it is compiled in
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Validate the config settings that the guest tries to set.
The wiki page documentation is not really accurate here:
generally rather than failing requests to set bad parameters,
the hardware will just clip them to something sensible.
Validate the most important parameters: sizes and
the viewport offsets. This prevents the framebuffer
code from trying to read out-of-range memory.
In the property handling code, we validate the new parameters every
time we encounter a tag that sets them. This means we validate the
config multiple times if the request includes multiple config-setting
tags, but the code would require significant restructuring to do a
validation only once but still return the clipped settings for
get-parameter tags and the buffer allocation tag.
Validation of settings made via the older bcm2835_fb_mbox_push()
function will be done in the next commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-8-peter.maydell@linaro.org
The raspi framebuffir in bcm2835_fb supports the definition
of a virtual "viewport", which is smaller than the full
physical framebuffer size and at an adjustable offset within
it. Only the viewport area is sent to the screen. This allows
the guest to do things like double buffering, or scrolling
by adjusting the viewport origin. Currently QEMU doesn't
implement this at all.
Add support for this feature:
* the property mailbox code needs to distinguish the
virtual width/height from the physical width/height
* the framebuffer code needs to do something with the
virtual width/height/origin information
Note that the wiki documentation on the semantics of the
virtual and physical height and width has it the wrong way
around -- the virtual size is the size of the allocated
buffer, and the physical size is the size of the display,
so the virtual size is always the same as or larger than
the physical.
If the viewport size is set smaller than the physical
screen size, we ignore the viewport settings completely
and just display the physical screen area.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-7-peter.maydell@linaro.org
Abstract out the calculation of the pitch and size of the
framebuffer into functions that operate on the BCM2835FBConfig
struct -- these are about to get a little more complicated
when we add support for virtual and physical sizes differing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-6-peter.maydell@linaro.org
The bcm2835_fb's initial resolution and other parameters are set
via QOM properties. We should reset to those initial values on
device reset, which means we need to save the QOM property
values somewhere that they are not overwritten by guest
changes to the framebuffer configuration.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-5-peter.maydell@linaro.org
The BCM2835FBState struct has a 'pitch' field which is a
cached copy of xres * (bpp >> 3), and a 'size' field which is
a cached copy of pitch * yres. However we don't actually do
anything with these fields; delete them. We retain the
now-unused slots in the VMState struct for migration
compatibility.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-4-peter.maydell@linaro.org
Refactor the fb property setting code so that rather than
using a set of pointers to local variables to track
whether a config value has been updated in the current
mbox and if so what its new value is, we just copy
all the current settings of the fb at the start, and
then update that copy as we go along, before asking
the fb to switch to it at the end.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-3-peter.maydell@linaro.org
The handling of framebuffer properties in the bcm2835_property code
is a bit clumsy, because for each of the many fb related properties
we try to track the value we're about to set and whether we're going
to be setting a value, and then we hand all the new values off
to the framebuffer via a function which takes them all as separate
arguments. It would be simpler if the property code could easily
copy all the framebuffer's current settings, update them with
the new specified values and then ask the framebuffer to switch
to the new set.
As the first part of this refactoring, pull all the fb config
settings fields in BCM2835FBState out into their own struct.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-2-peter.maydell@linaro.org
Create a new include file for the pl022's device struct,
type macros, etc, so that it can be instantiated using
the "embedded struct" coding style.
While we're adding the new file to MAINTAINERS, add
also the .c file, which was missing an entry.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180820141116.9118-16-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The IoTKit doesn't have any MSCs itself but it does need
some wiring to connect the external signals from MSCs
in the outer board model up to the registers and the
NVIC IRQ line.
We also need to expose a MemoryRegion corresponding to
the AHB bus, so that MSCs in the outer board model can
use that as their downstream port. (In the FPGA this is
the "AHB Slave Expansion" ports shown in the block
diagram in the AN505 documentation.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180820141116.9118-14-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The IoTKit does not have any Master Security Contollers itself,
but it does provide registers in the secure privilege control
block which allow control of MSCs in the external system.
Add support for these registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180820141116.9118-13-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement a model of the TrustZone Master Securtiy Controller,
as documented in the Arm CoreLink SIE-200 System IP for
Embedded TRM (DDI0571G):
https://developer.arm.com/products/architecture/m-profile/docs/ddi0571/g
The MSC is intended to sit in front of a device which can
be a bus master (eg a DMA controller) and programmably gate
its transactions. This allows a bus-mastering device to be
controlled by non-secure code but still restricted from
making accesses to addresses which are secure-only.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180820141116.9118-12-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Wire up the system control element's register banks
(sysctl and sysinfo).
This is the last of the previously completely unimplemented
components in the IoTKit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-11-peter.maydell@linaro.org
Implement the IoTKit system control element's system information
block; this is just a pair of read-only version/config registers,
plus the usual PID/CID ID registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-10-peter.maydell@linaro.org
The Arm IoTKit includes a system control element which
provides a block of read-only ID registers and a block
of read-write control registers. Implement a minimal
version of this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-9-peter.maydell@linaro.org
The IoTKit has a CMSDK timer device that runs on the S32KCLK.
Create this and wire it up.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-8-peter.maydell@linaro.org
The IoTKit includes three different instances of the
CMSDK APB watchdog; create and wire them up.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-7-peter.maydell@linaro.org
Now we have a model of the CMSDK dual timer, we can wire it
up in the IoTKit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-5-peter.maydell@linaro.org
The Arm Cortex-M System Design Kit includes a "dual-input timer module"
which combines two programmable down-counters. Implement a model
of this device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-4-peter.maydell@linaro.org
In the MPS2 FPGAIO, PSCNTR is a free-running downcounter with
a reload value configured via the PRESCALE register, and
COUNTER counts up by 1 every time PSCNTR reaches zero.
Implement these counters.
We can just increment the counters migration subsection's
version ID because we only added it in the previous commit,
so no released QEMU versions will be using it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-3-peter.maydell@linaro.org
The MPS2 FPGAIO block includes some simple free-running counters.
Implement these.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-2-peter.maydell@linaro.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814002653.12828-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814002653.12828-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some scanouts during boot are top-down without it.
y0_top is set from VHOST_USER_GPU_DMABUF_SCANOUT code path in the last
patch of this series.
In current QEMU code base, only vfio/display uses dmabuf API. But the
VFIO query interface doesn't provide or need that detail so far.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180713130916.4153-5-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlt+5OYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPtxwf8CQM/F+0L+EKeYfYcVgVZsDhhOkLj
Pm61q0bZsWKLby5jCqIDYw7Z/vodJnSS1DO0slIRoXxvQ9DwlkbBnBy/aG/E9U0q
WF1vbCezibDIt7sGcsu9F5zXU9eqe+E6dZfxFrv8FQSOFVxn34TfeJagWLCtzg0d
LnVTF/e4zJD8IQiM7w6lJQxua3fz13ssPEg2KnMkguDhACMwvZ/K/cA2AJkHRMhY
sroPMwLHlrF1NOoeCIrWxYUmSGCRCAy1DmiPGiiSs0yBq/dL0UkAa5Eu6HMQ7rgI
zUff3JDmzEjixUSIEbpVRN+yPCN0/ACSOpJUrKLDxXbc4nZ+PBQ04YpyPQ==
=UZiV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* x86 TCG fixes for 64-bit call gates (Andrew)
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)
# gpg: Signature made Thu 23 Aug 2018 17:46:30 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
KVM: cleanup unnecessary #ifdef KVM_CAP_...
target/i386: update MPX flags when CPL changes
i2c: pm_smbus: Add the ability to force block transfer enable
i2c: pm_smbus: Don't delay host status register busy bit when interrupts are enabled
i2c: pm_smbus: Add interrupt handling
i2c: pm_smbus: Add block transfer capability
i2c: pm_smbus: Make the I2C block read command read-only
i2c: pm_smbus: Fix the semantics of block I2C transfers
i2c: pm_smbus: Clean up some style issues
pc-dimm: assign and verify the "addr" property during pre_plug
pc: drop memory region alignment check for 0
util/oslib-win32: indicate alignment for qemu_anon_ram_alloc()
pc-dimm: assign and verify the "slot" property during pre_plug
ipmi: Use proper struct reference for BT vmstate
vhost-scsi: expose 't10_pi' property for VIRTIO_SCSI_F_T10_PI
vhost-scsi: unify vhost-scsi get_features implementations
vhost-user-scsi: move host_features into VHostSCSICommon
cpus: allow cpu_get_ticks out of BQL
cpus: protect TimerState writes with a spinlock
seqlock: add QemuLockable support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PIIX4 hardware has block transfer buffer always enabled in
the hardware, but the i801 does not. Add a parameter to pm_smbus_init
to force on the block transfer so the PIIX4 handler can enable this
by default, as it was disabled by default before.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1534796770-10295-9-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the necessary code so that interrupts actually work from
the pm_smbus device.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1534796770-10295-7-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There was no block transfer code in pm_smbus.c, and it is needed
for some devices. So add it.
This adds both byte-by-byte block transfers and buffered block
transfers.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1534796770-10295-5-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The I2C block transfer commands was not implemented correctly, it
read a length byte and such like it was an smbus transfer.
So fix the smbus_read_block() and smbus_write_block() functions
so they can properly handle I2C transfers, and normal SMBus
transfers (for upcoming changes). Pass in a transfer size and
a bool to know whether to use the size byte (like SMBus) or use
the length given (like I2C).
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1534796770-10295-3-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can assign and verify the address before realizing and trying to plug.
reading/writing the address property should never fail for DIMMs, so let's
reduce error handling a bit by using &error_abort. Getting access to the
memory region now might however fail. So forward errors from
get_memory_region() properly.
As all memory devices should use the alignment of the underlying memory
region for guest physical address asignment, do detection of the
alignment in pc_dimm_pre_plug(), but allow pc.c to overwrite the
alignment for compatibility handling.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180801133444.11269-5-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can assign and verify the slot before realizing and trying to plug.
reading/writing the slot property should never fail, so let's reduce
error handling a bit by using &error_abort.
To do this during pre_plug, add and use (x86, ppc) pc_dimm_pre_plug().
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180801133444.11269-2-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for having vhost-scsi also make use of host_features,
move it from struct VHostUserSCSI into struct VHostSCSICommon.
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Message-Id: <20180808195235.5843-2-gedwards@ddn.com>
Reviewed-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Iterating over the list without using atomics is undefined behaviour,
since the list can be modified concurrently by other threads (e.g.
every time a new thread is created in user-mode).
Fix it by implementing the CPU list as an RCU QTAILQ. This requires
a little bit of extra work to traverse list in reverse order (see
previous patch), but other than that the conversion is trivial.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-12-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's unnecessary because the pointer isn't dereferenced.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-3-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To avoid undefined behaviour.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-2-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Hildenbrand
Edgar E. Iglesias
Mao Zhongyi
Peter Maydell
Vladimir Sementsov-Ogievskiy
Peter Xu
BALATON Zoltan
Thomas Huth
Marc-André Lureau
Alex Williamson
Eric Blake
Corey Minyard
Gerd Hoffmann
Li Qiang
Jason Wang
Daniel P. Berrangé
Suraj Jitindar Singh
Paolo Bonzini
Philippe Mathieu-Daudé
Singh, Brijesh
Leonid Bloch
Max Reitz
Kevin Wolf
Richard Henderson
Julia Suvorova
Tao Xu
Robert Hoo
John Snow
Stefan Markovic
Li Qiang
Aleksandar Markovic
Markus Armbruster
Fei Li
Alberto Garcia
Roman Kagan
Igor Mammedov
Roman Bolshakov
Peng Hao
Artem Pisarenko
Zhang Chen
Emilio G. Cota
Fredrik Noring
John Arbuckle
Eric Auger
Tony Krowiak
Cornelia Huck
Denis V. Lunev
Janosch Frank
Hikaru Nishida
Viktor Prutyanov
Pavel Dovgalyuk
Li Zhijian
Cédric Le Goater
Joel Stanley
Mark Cave-Ayland
Jing Liu
Michael Clark
Aleksandar Rikalo
Greg Edwards