Without EIC, this bit is RES1. So set the bit at reset,
and add it to the readonly fields of CR_STATUS.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-40-richard.henderson@linaro.org>
Copy the existing cpu_index into the space reserved for CR_CPUID.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-39-richard.henderson@linaro.org>
Create an array of masks which detail the writable and readonly
bits for each control register. Apply them when writing to
control registers, including the write to status during eret.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220421151735.31996-38-richard.henderson@linaro.org>
The 4 lower bits, D, PERM, BAD, DBL, are unconditionally set on any
exception with EH=0, or so says Table 42 (Processor Status After
Taking Exception).
We currently do not set PERM or BAD at all, and only set/clear
DBL for tlb miss, and do not clear DBL for any other exception.
It is a bit confusing to set D in tlb_fill and the rest during
do_interrupt, so move the setting of D to do_interrupt as well.
To do this, split EXP_TLBD into two cases, EXCP_TLB_X and EXCP_TLB_D,
which allows us to distinguish them during do_interrupt. Choose
a value for EXCP_TLB_D such that when truncated it produces the
correct value for exception.CAUSE.
Rename EXCP_TLB[RWX] to EXCP_PERM_[RWX], to emphasize that the
exception is permissions related. Rename EXCP_SUPER[AD] to
EXCP_SUPERA_[DX] to emphasize that they are both "supervisor
address" exceptions, data and execute.
Retain the setting of tlbmisc.WE for the fast-tlb-miss path, as it
is being relied upon, but remove it from the permission path.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-37-richard.henderson@linaro.org>
The register is entirely read-only for software, and we do not
implement ECC, so we need not deposit the cause into an existing
value; just create a new value from scratch.
Furthermore, exception.CAUSE is not written for break exceptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-36-richard.henderson@linaro.org>
While some of the plumbing for misaligned data is present, in the form
of nios2_cpu_do_unaligned_access, the hook will not be called because
TARGET_ALIGNED_ONLY is not set in configs/targets/nios2-softmmu.mak.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220421151735.31996-35-richard.henderson@linaro.org>
Performing this early means that we can merge more cases
within the non-logging switch statement.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-34-richard.henderson@linaro.org>
Split out do_exception and do_iic_irq to handle bulk of the interrupt and
exception processing. Parameterize the changes required to cpu state.
The status.EH bit, which protects some data against double-faults,
is only present with the MMU. Several exception cases did not check
for status.EH being set, as required.
The status.IH bit, which had been set by EXCP_IRQ, is exclusive to
the external interrupt controller, which we do not yet implement.
The internal interrupt controller, when the MMU is also present,
sets the status.EH bit.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-33-richard.henderson@linaro.org>
Decode 'break 1' during translation, rather than doing
it again during exception processing.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-32-richard.henderson@linaro.org>
These symbols become available to the debugger.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-31-richard.henderson@linaro.org>
Use FIELD_EX32 and FIELD_DP32 instead of managing the
masking by hand.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-30-richard.henderson@linaro.org>
WE is the architectural name of the field, not WR.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-29-richard.henderson@linaro.org>
Retain the helper macros for single bit fields as aliases to
the longer R_*_MASK names. Use FIELD_EX32 and FIELD_DP32
instead of manually manipulating the fields.
Since we're rewriting the references to CR_TLBACC_IGN_* anyway,
we correct the name of this field to IG, which is its name in
the official CPU documentation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-28-richard.henderson@linaro.org>
Use FIELD_EX32 and FIELD_DP32 instead of manual manipulation
of the fields.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-27-richard.henderson@linaro.org>
Use FIELD_DP32 instead of manual shifting and masking.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-26-richard.henderson@linaro.org>
Add all fields; retain the helper macros for single bit fields.
So far there are no uses of the multi-bit status fields.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-25-richard.henderson@linaro.org>
Do not print control registers for user-only mode.
Rename reserved control registers to "resN", where
N is the control register index.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-24-richard.henderson@linaro.org>
Place the control registers into their own array, env->ctrl[].
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-23-richard.henderson@linaro.org>
This function is unused. The real computation of this value
is located in nios2_cpu_exec_interrupt.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-22-richard.henderson@linaro.org>
Drop the set of estatus in init_thread; it was clearly intended
to be setting the value of CR_STATUS for the application, but we
never actually performed that copy. However, the proper value is
set in nios2_cpu_reset so we don't need to do anything here.
We only initialize SP and EA in init_thread, there's no value in
copying other uninitialized data into ENV.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-21-richard.henderson@linaro.org>
We don't need to reference them often, and when we do it
is just as easy to load/store from cpu_env directly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-20-richard.henderson@linaro.org>
We had failed to copy BSTATUS back to STATUS, and diagnose
supervisor-only. The spec is light on the specifics of the
implementation of bret, but it is an easy assumption that
the restore into STATUS should work the same as eret.
Therefore, reuse the existing helper_eret.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-19-richard.henderson@linaro.org>
The implementation of eret will become much more complex
with the introduction of shadow registers.
[rth: Split out of a larger patch for shadow register sets.
Directly exit to the cpu loop from the helper.]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Amir Gonnen <amir.gonnen@neuroblade.ai>
Message-Id: <20220303153906.2024748-3-amir.gonnen@neuroblade.ai>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-18-richard.henderson@linaro.org>
It is cleaner to have a separate name for this variable.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-17-richard.henderson@linaro.org>
Split NUM_CORE_REGS into components that can be used elsewhere.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Amir Gonnen <amir.gonnen@neuroblade.ai>
Message-Id: <20220303153906.2024748-3-amir.gonnen@neuroblade.ai>
[rth: Split out of a larger patch for shadow register sets.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-16-richard.henderson@linaro.org>
Whether the cpu is in user-mode or not is something that we
know at translation-time. We do not need to generate code
after having raised an exception.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-15-richard.henderson@linaro.org>
eret instruction is only allowed in supervisor mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Amir Gonnen <amir.gonnen@neuroblade.ai>
Message-Id: <20220303153906.2024748-2-amir.gonnen@neuroblade.ai>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-14-richard.henderson@linaro.org>
Use the simpler signal interface, which forces us to supply
the missing PC value to si_addr.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220421151735.31996-13-richard.henderson@linaro.org>
Remove the #ifdef !defined(CONFIG_USER_ONLY) that surrounds
the whole file, and move helper.c to nios2_softmmu_ss.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220421151735.31996-12-richard.henderson@linaro.org>
Since f5ef0e518d, we have a real page mapped for kuser,
which means the special casing for SIGSEGV can go away.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220421151735.31996-11-richard.henderson@linaro.org>
Since 7827168471, this function is unused for user-only,
when the TCGCPUOps.do_interrupt hook itself became system-only.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220421151735.31996-10-richard.henderson@linaro.org>
Now that threads and signals have been fixed, re-enable tests.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-9-richard.henderson@linaro.org>
Drop the kernel-specific "pr2" code structure and use
the qemu-specific error return value.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-8-richard.henderson@linaro.org>
There is no sigreturn syscall, only rt_sigreturn.
This function is unused.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-7-richard.henderson@linaro.org>
Honor QEMU_ESIGRETURN and QEMU_ERESTARTSYS.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-6-richard.henderson@linaro.org>
Follow the kernel assembly, which considers all negative
return values to be errors.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-5-richard.henderson@linaro.org>
Syscall 0 is __NR_io_setup for this target; there is nothing
to work around.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: a0a839b65b ("nios2: Add usermode binaries emulation")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-4-richard.henderson@linaro.org>
The child side of clone needs to set the secondary
syscall return value, r7, to indicate syscall success.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-3-richard.henderson@linaro.org>
Note that this advance *should* be done by the translator, as
that's the pc value that's supposed to be generated by hardware.
However, that's a much larger change across sysemu as well.
In the meantime, produce the correct PC for any signals raised
by the trap instruction. Note the special case of TRAP_BRKPT,
which itself is special cased within the kernel.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-2-richard.henderson@linaro.org>
- New @force parameter for blockdev-change-medium
- Improvements to the iotests to help with debugging
- Fix iotest 108 on systems without user_allow_other in fuse.conf
-----BEGIN PGP SIGNATURE-----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=url0
-----END PGP SIGNATURE-----
Merge tag 'pull-block-2022-04-25' of https://gitlab.com/hreitz/qemu into staging
Block patches:
- New @force parameter for blockdev-change-medium
- Improvements to the iotests to help with debugging
- Fix iotest 108 on systems without user_allow_other in fuse.conf
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEy2LXoO44KeRfAE00ofpA0JgBnN8FAmJmqyISHGhyZWl0ekBy
# ZWRoYXQuY29tAAoJEKH6QNCYAZzf7uEP/RKNblyIuFjHkPgaMzWqdGUjHpbRzKBi
# NFgO+ISRCSx/KXYBaanJP94qKLfpACJ1JHDUD3hipeO3kmVGmtF93cKypTQS4qhL
# bGmX+h38AK1omSR2iWRhu4ue4VAPeu9gLoHNYJ5vZlylWD3eHdppN7K2KFf7Aeo5
# /BnhwHiU2IQ7WkLlo5Pdb96+LqZfmCGYJGWO6eWx123+j+bpjLfpmV9+Kjzb1pDc
# FN60OFlp8RozXHKpqh4ZoThtJ+t3sYdlo6yvg1K18Y5JcXTx5d4D24HGo1ZIRxqz
# XgJbi+bSr8hnxCjvdUZlr3IpbjAE5DVbCjtDxyjGnim6vjIwhxCSWM7Bvzw2tm60
# TYNl2zxyIe5831v6Xv/YfYJFqtos/orZf87TSqx/uWrfinbxZ1nN/8zi5z9lC8tg
# S6IlNpKPK0wv33BmLVHcsnMABLY2YiJPx/Ngl0CvAEGvkQdaHzgcYGbmeEMrZTv7
# hVpBb1t+AKmnXYYZdCh4ulfJLUg3R9mXf0oI3otbcpNMwExB6hqcVI23VYC00Ct5
# m3Tb6bddIkBih25l9B7i6FPWfXG+0zu6Q4kIQiXmfNkqKseQ96aDY1aAU/GWoTZH
# MOOPqIhmLRgyYpJ3+am9AseczaMybC4DIfx1VXzjwS/X3YwHvHEbZ7iPR6C0630Z
# yslJbuH4ERl7
# =url0
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 25 Apr 2022 07:07:30 AM PDT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* tag 'pull-block-2022-04-25' of https://gitlab.com/hreitz/qemu:
iotests/108: Fix when missing user_allow_other
iotests: make qemu_io_log() check return codes by default
iotests: remove qemu_io_silent() and qemu_io_silent_check().
iotests: remove qemu_io_pipe_and_status()
iotests/image-fleecing: switch to qemu_io()
iotests/migration-permissions: use assertRaises() for qemu_io() negative test
iotests: rebase qemu_io() on top of qemu_tool()
iotests: create generic qemu_tool() function
iotests/040: Fix TestCommitWithFilters test
iotests/040: Don't check image pattern on zero-length image
iotests: Don't check qemu_io() output for specific error strings
iotests/163: Fix broken qemu-io invocation
iotests: replace calls to log(qemu_io(...)) with qemu_io_log()
block: add 'force' parameter to 'blockdev-change-medium' command
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
FUSE exports' allow-other option defaults to "auto", which means that it
will try passing allow_other as a mount option, and fall back to not
using it when an error occurs. We make no effort to hide fusermount's
error message (because it would be difficult, and because users might
want to know about the fallback occurring), and so when allow_other does
not work (primarily when /etc/fuse.conf does not contain
user_allow_other), this error message will appear and break the
reference output.
We do not need allow_other here, though, so we can just pass
allow-other=off to fix that.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220421142435.569600-1-hreitz@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Just like qemu_img_log(), upgrade qemu_io_log() to enforce a return code
of zero by default.
Tests that use qemu_io_log(): 242 245 255 274 303 307 nbd-reconnect-on-open
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-13-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Like qemu-img, qemu-io returning 0 should be the norm and not the
exception. Remove all calls to qemu_io_silent that just assert the
return code is zero (That's every last call, as it turns out), and
replace them with a normal qemu_io() call.
qemu_io_silent_check() appeared to have been unused already.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-12-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
I know we just added it, sorry. This is done in favor of qemu_io() which
*also* returns the console output and status, but with more robust error
handling on failure.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-11-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This test expects failure ... but only sometimes. When? Why?
It's for reads of a region not defined by a bitmap. Adjust the test to
be more explicit about what it expects to fail and why.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-10-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Modify this test to use assertRaises for its negative testing of
qemu_io. If the exception raised does not match the one we tell it to
expect, we get *that* exception unhandled. If we get no exception, we
get a unittest assertion failure and the provided emsg printed to
screen.
If we get the CalledProcessError exception but the output is not what we
expect, we re-raise the original CalledProcessError.
Tidy.
(Note: Yes, you can reference "with" objects after that block ends; it
just means that ctx.__exit__(...) will have been called on it. It does
not *actually* go out of scope. unittests expects you to want to inspect
the Exception object, so they leave it defined post-exit.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-9-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
reimplement qemu_img() in terms of qemu_tool() in preparation for doing
the same with qemu_io().
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-7-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Without this change, asserting that qemu_io always returns 0 causes this
test to fail in a way we happened not to be catching previously:
qemu.utils.VerboseProcessError: Command
'('/home/jsnow/src/qemu/bin/git/tests/qemu-iotests/../../qemu-io',
'--cache', 'writeback', '--aio', 'threads', '-f', 'qcow2', '-c',
'read -P 4 3M 1M',
'/home/jsnow/src/qemu/bin/git/tests/qemu-iotests/scratch/3.img')'
returned non-zero exit status 1.
┏━ output ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
┃ qemu-io: can't open device
┃ /home/jsnow/src/qemu/bin/git/tests/qemu-iotests/scratch/3.img:
┃ Could not open backing file: Could not open backing file: Throttle
┃ group 'tg' does not exist
┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The commit jobs changes the backing file string stored in the image file
header belonging to the node above the commit’s top node to point to the
commit target (the base node). QEMU tries to be as accurate as
possible, and so in these test cases will include the filter that is
part of the block graph in that backing file string (by virtue of making
it a json:{} description of the post-commit subgraph). This makes
little sense outside of QEMU, though: Specifically, the throttle node in
that subgraph will dearly miss its supposedly associated throttle group
object.
When starting the commit job, we can specify a custom backing file
string to write into said image file, so let’s use that feature to write
the plain filename of the backing chain’s next actual image file there.
Explicitly provide the backing file so that opening the file outside of
QEMU (Where we will not have throttle groups) will succeed.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220418211504.943969-6-jsnow@redhat.com>
Richard Henderson
Amir Gonnen
Hanna Reitz
John Snow