The current IRQ state and IRQ mask are handled exactly the same as standard
register accesses, so store these values directly in the regs array rather
than having separate variables for them.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Currently when QEMU tries to migrate the macfb framebuffer it crashes randomly
because the opaque provided by the DeviceClass vmsd property for both devices
is set to MacfbState rather than MacfbNubusState or MacfbSysBusState as
appropriate.
Resolve the issue by adding new VMStateDescriptions for MacfbNubusState and
MacfbSysBusState which embed the existing vmstate_macfb VMStateDescription
within them using VMSTATE_STRUCT.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that the logic related to edge-triggered interrupts is all contained within
the mos6522 device the redundant implementation for the mac99 PMU device can
be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The mos6522 datasheet describes how the control lines IRQs are edge-triggered
according to the configuration in the PCR register. Implement the logic according
to the datasheet so that the interrupt bits in IFR are latched when the edge is
detected, and cleared when reading portA/portB or writing to IFR as necessary.
To maintain bisectibility this change also updates the SCSI, SCSI data, Nubus
and VIA2 60Hz/1Hz clocks in the q800 machine to be negative edge-triggered as
confirmed by the PCR programming in all of Linux, NetBSD and MacOS.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The VIA2 on the Q800 machine is not a separate chip as in older Macs but instead
is integrated into the on-board logic. From analysing the SCSI routines in the
MacOS toolbox ROM (and to a lesser extent NetBSD and Linux) the expectation seems
to be that the SCSI_DATA (DRQ) bit is live on the Q800 and not latched.
Fortunately we can use the recently introduced mos6522 last_irq_levels variable
which tracks the edge-triggered state to return the SCSI_DATA (DRQ) bit live to
the guest OS.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220305150957.5053-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
To detect edge-triggered IRQs it is necessary to store the last state of each
IRQ in a last_irq_levels bitmap.
Note: this is a migration break for machines which use mos6522 instances which
are g3beige/mac99 (PPC) and q800 (m68k).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This displays detailed information about the device registers and timers to aid
debugging problems with timers and interrupts.
Currently the QAPI generators for HumanReadableText don't work correctly if
used in qapi/target-misc.json when a non-specified target is built, so for
now manually add a hmp_info_via() wrapper until direct support for per-device
HMP/QMP commands is implemented.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This helps to follow how the guest is programming the mos6522 when debugging.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220305150957.5053-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Switch from using a legacy approach to the more formal approach for propagating
device reset to the parent.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that the mos6522 IRQs are managed using standard qdev gpios these methods
are no longer required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
For historical reasons each mos6522 instance implements its own setting and
update of the IFR flag bits using methods exposed by MOS6522DeviceClass. As
of today this is no longer required, and it is now possible to implement
the mos6522 IRQs as standard qdev gpios.
Switch over to use qdev gpios for the mos6522 device and update all instances
accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This allows us to easily see how the physical control lines are mapped to the
IFR bit flags.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220305150957.5053-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This allows us to easily see how the physical control lines are mapped to the
IFR bit flags.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
These are intended to make it easier to see how the physical control lines
are wired for each instance.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220305150957.5053-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
vhost-user enabled on non-linux systems
beginning of nvme sriov support
bigger tx queue for vdpa
virtio iommu bypass
FADT flag to detect legacy keyboards
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmImipMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpD5AH/jz73VVDE3dZTtsdEH/f2tuO8uosur9fIjHJ
nCMwBoosdDWmrWjrwxynmG6e+qIcOHEGdTInvS1TY2OTU+elNNTiR57pWiljXRsJ
2kNIXKp4dXaYI/bxmKUzKSoVscyWxL686ND4U8sZhuppSNrWpLmMUNgwqmYjQQLV
yd2JpIKgZYnzShPnJMDtF3ItcCHetY6jeB28WAclKywIEuCTmjulYCTaH5ujroG9
rykMaQIjoe/isdmCcBx05UuMxH61vf5L8pR06N6e3GO9T2/Y/hWuteVoEJaCQvNa
+zIyL2hOjGuMKr+icLo9c42s3yfwWNsRfz87wqdAY47yYSyc1wo=
=3NVe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user enabled on non-linux systems
beginning of nvme sriov support
bigger tx queue for vdpa
virtio iommu bypass
FADT flag to detect legacy keyboards
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 07 Mar 2022 22:43:31 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (47 commits)
hw/acpi/microvm: turn on 8042 bit in FADT boot architecture flags if present
tests/acpi: i386: update FACP table differences
hw/acpi: add indication for i8042 in IA-PC boot flags of the FADT table
tests/acpi: i386: allow FACP acpi table changes
docs: vhost-user: add subsection for non-Linux platforms
configure, meson: allow enabling vhost-user on all POSIX systems
vhost: use wfd on functions setting vring call fd
event_notifier: add event_notifier_get_wfd()
pci: drop COMPAT_PROP_PCP for 2.0 machine types
hw/smbios: Add table 4 parameter, "processor-id"
x86: cleanup unused compat_apic_id_mode
vhost-vsock: detach the virqueue element in case of error
pc: add option to disable PS/2 mouse/keyboard
acpi: pcihp: pcie: set power on cap on parent slot
pci: expose TYPE_XIO3130_DOWNSTREAM name
pci: show id info when pci BDF conflict
hw/misc/pvpanic: Use standard headers instead
headers: Add pvpanic.h
pci-bridge/xio3130_downstream: Fix error handling
pci-bridge/xio3130_upstream: Fix error handling
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# docs/specs/index.rst
* Update Haiku VM to a usable level
* Some other miscellaneous small fixes
-----BEGIN PGP SIGNATURE-----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=SY3w
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2022-03-07' into staging
* Fixes for s390x TCG tests
* Update Haiku VM to a usable level
* Some other miscellaneous small fixes
# gpg: Signature made Mon 07 Mar 2022 18:07:00 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2022-03-07:
Check and report for incomplete 'global' option format
tests/vm: Update haiku test vm to R1/Beta3
tests/avocado: Cancel BootLinux tests in case there is no free port
MAINTAINERS: Update the files in the FreeBSD section
tests/tcg/s390x: Cleanup of mie3 tests.
tests/tcg/s390x: Fix the exrl-trt* tests with Clang
tests/tcg/s390x: Fix mvc, mvo and pack tests with Clang
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* cleanups of qemu_oom_check() and qemu_memalign()
* target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
* target/arm/translate-neon: Simplify align field check for VLD3
* GICv3 ITS: add more trace events
* GICv3 ITS: implement 8-byte accesses properly
* GICv3: fix minor issues with some trace/log messages
* ui/cocoa: Use the standard about panel
* target/arm: Provide cpu property for controling FEAT_LPA2
* hw/arm/virt: Disable LPA2 for -machine virt-6.2
-----BEGIN PGP SIGNATURE-----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=ix0J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220307' into staging
target-arm queue:
* cleanups of qemu_oom_check() and qemu_memalign()
* target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
* target/arm/translate-neon: Simplify align field check for VLD3
* GICv3 ITS: add more trace events
* GICv3 ITS: implement 8-byte accesses properly
* GICv3: fix minor issues with some trace/log messages
* ui/cocoa: Use the standard about panel
* target/arm: Provide cpu property for controling FEAT_LPA2
* hw/arm/virt: Disable LPA2 for -machine virt-6.2
# gpg: Signature made Mon 07 Mar 2022 16:46:06 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20220307:
hw/arm/virt: Disable LPA2 for -machine virt-6.2
target/arm: Provide cpu property for controling FEAT_LPA2
ui/cocoa: Use the standard about panel
hw/intc/arm_gicv3_cpuif: Fix register names in ICV_HPPIR read trace event
hw/intc/arm_gicv3: Fix missing spaces in error log messages
hw/intc/arm_gicv3: Specify valid and impl in MemoryRegionOps
hw/intc/arm_gicv3_its: Add trace events for table reads and writes
hw/intc/arm_gicv3_its: Add trace events for commands
target/arm/translate-neon: Simplify align field check for VLD3
target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
osdep: Move memalign-related functions to their own header
util: Put qemu_vfree() in memalign.c
util: Use meson checks for valloc() and memalign() presence
util: Share qemu_try_memalign() implementation between POSIX and Windows
meson.build: Don't misdetect posix_memalign() on Windows
util: Return valid allocation for qemu_try_memalign() with zero size
util: Unify implementations of qemu_memalign()
util: Make qemu_oom_check() a static function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The second bit of IAPC_BOOT_ARCH in FADT table indicates the presence of
keyboard controller implemented as 8042 or equivalent micro controller. This
change enables this flag for microvms if such a device exists (for example,
when added explicitly from the QEMU commandline). Change
654701e292d98b308b0 ("hw/acpi: add indication for i8042 in IA-PC boot flags of the FADT table")
enabled this flag for i386 q35 based machines. The reason for doing the same
for micro-vms is to make sure we provide the correct tables to the guest OS
uniformly in all cases when an i8042 device is present. When this bit is not
enabled, guest OSes has to find other indirect methods to detect the device
which we would like to avoid.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220304154032.2071585-5-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mea culpa. Dan's patch wound up with the wrong import path because I
re-ordered my most recent pull request and missed that this needed a fix
on rebase.
Fixes: 43912529
Reported-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-id: 20220225170828.3418305-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
_bind_hack() was a quick fix to allow async QMP to call bind(2) prior to
calling listen(2) and accept(2). This wasn't sufficient to fully address
the race condition present in synchronous clients.
With the race condition in legacy.py fixed (see the previous commit),
there are no longer any users of _bind_hack(). Drop it.
Fixes: b0b662bb2b
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-11-jsnow@redhat.com
[Expanded commit message. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
legacy.py provides a synchronous model. iotests frequently uses this
paradigm:
- create QMP client object
- start QEMU process
- await connection from QEMU process
In the switch from sync to async QMP, the QMP client object stopped
calling bind() and listen() during the QMP object creation step, which
creates a race condition if the QEMU process dials in too quickly.
With refactoring out of the way, restore the former behavior of calling
bind() and listen() during __init__() to fix this race condition.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-10-jsnow@redhat.com
[Expanded commit message. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Add start_server() and accept() methods that can be used instead of
start_server_and_accept() to allow more fine-grained control over the
incoming connection process.
(Eagle-eyed reviewers will surely notice that it's a bit weird that
"CONNECTING" is a state that's shared between both the start_server()
and connect() states. That's absolutely true, and it's very true that
checking on the presence of _accepted as an indicator of state is a
hack. That's also very certainly true. But ... this keeps client code an
awful lot simpler, as it doesn't have to care exactly *how* the
connection is being made, just that it *is*. Is it worth disrupting that
simplicity in order to provide a better state guard on `accept()`? Hm.)
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Before we allow the full separation of starting the server and accepting
new connections, make sure that the disconnect cleans up the server and
its new state, too.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Refactor _do_accept() into _do_start_server() and _do_accept(). As of
this commit, the former calls the latter, but in subsequent commits
they'll be split apart.
(So please forgive the misnomer for _do_start_server(); it will live up
to its name shortly, and the docstring will be updated then too. I'm
just cutting down on some churn.)
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
I would really like to keep this under 1000 lines, I promise. Doesn't
look like it's gonna happen.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
As part of disentangling the monolithic nature of _do_accept(), split
out the incoming callback to prepare for factoring out the "wait for a
peer" step. Namely, this means using an event signal we can wait on from
outside of this method.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
These two methods attempted to entirely envelop the logic of
establishing a connection to a peer start to finish. However, we need to
break apart the incoming connection step into more granular steps. We
will no longer be able to reasonably constrain the logic inside of these
helper functions.
So, remove them - with _session_guard(), they no longer serve a real
purpose.
Although the public API doesn't change, the internal API does. Now that
there are no intermediary methods between e.g. connect() and
_do_connect(), there's no hook where the runstate is set. As a result,
the test suite changes a little to cope with the new semantics of
_do_accept() and _do_connect().
Lastly, take some pieces of the now-deleted docstrings and move
them up to the public interface level. They were a little more detailed,
and it won't hurt to keep them.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Previously, I had a method named "accept()" that under-the-hood calls
bind(2), listen(2) *and* accept(2). I meant this as a simplification and
counterpart to the one-shot "connect()" method.
This is confusing to readers who expect accept() to mean *just*
accept(2). Since I need to split apart the "accept()" method into
multiple methods anyway (one of which strongly resembling accept(2)), it
feels pertinent to rename this method *now*.
Rename this all-in-one method "start_server_and_accept()" instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In _new_session, there's a fairly complex except clause that's used to
give semantic errors to callers of accept() and connect(). We need to
create a new two-step replacement for accept(), so factoring out this
piece of logic will be useful.
Bolster the comments and docstring here to try and demystify what's
going on in this fairly delicate piece of Python magic.
(If we were using Python 3.7+, this would be an @asynccontextmanager. We
don't have that very nice piece of magic, however, so this must take an
Awaitable to manage the Exception contexts properly. We pay the price
for platform compatibility.)
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
- Use CPUArchState as an abstract type, defined by each target
(CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code).
-----BEGIN PGP SIGNATURE-----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=bOxK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd/tags/abstract-arch-cpu-20220307' into staging
- Re-org accel/ and softmmu/ to have more target-agnostic objects.
- Use CPUArchState as an abstract type, defined by each target
(CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code).
# gpg: Signature made Sun 06 Mar 2022 23:23:19 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd/tags/abstract-arch-cpu-20220307: (33 commits)
accel/tcg: Remove pointless CPUArchState casts
target/i386: Remove pointless CPUArchState casts
target: Use ArchCPU as interface to target CPU
target: Introduce and use OBJECT_DECLARE_CPU_TYPE() macro
target: Use CPUArchState as interface to target-specific CPU state
target: Use forward declared type instead of structure type
target/hexagon: Add missing 'hw/core/cpu.h' include
target: Include missing 'cpu.h'
Hexagon (target/hexagon) convert to OBJECT_DECLARE_TYPE
target/i386/tcg/sysemu: Include missing 'exec/exec-all.h' header
cpu: Add missing 'exec/exec-all.h' and 'qemu/accel.h' headers
exec/cpu_ldst: Include 'cpu.h' to get target_ulong definition
meson: Display libfdt as disabled when system emulation is disabled
softmmu: Build target-agnostic objects once
softmmu: Add qemu_init_arch_modules()
exec/cpu: Make address_space_init/reloading_memory_map target agnostic
exec/gdbstub: Make gdb_exit() / gdb_set_stop_cpu() target agnostic
misc: Add missing "sysemu/cpu-timers.h" include
misc: Remove unnecessary "sysemu/cpu-timers.h" include
softmmu/cpu-timers: Remove unused 'exec/exec-all.h' header
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The old image did not have python3 yet, and thus was not usable
for compiling QEMU anymore.
Suggested-by: Alexander von Gluck IV <kallisti5@unixzen.com>
Message-Id: <20220216154208.2985103-1-kallisti5@unixzen.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The BootLinux tests are currently failing with an ugly python
stack trace on my RHEL8 system since they cannot get a free port
(likely due to the firewall settings on my system). Let's properly
check the return value of find_free_port() instead and cancel the
test gracefully if it cannot get a free port.
Message-Id: <20220228114325.818294-1-thuth@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- New fleecing backup scheme
- iotest fixes
- Fixes for the curl block driver
- Fix for the preallocate block driver
- IDE fix for zero-length TRIM requests
-----BEGIN PGP SIGNATURE-----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=OH/S
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hreitz-gitlab/tags/pull-block-2022-03-07' into staging
Block patches for 7.0-rc0:
- New fleecing backup scheme
- iotest fixes
- Fixes for the curl block driver
- Fix for the preallocate block driver
- IDE fix for zero-length TRIM requests
# gpg: Signature made Mon 07 Mar 2022 10:33:31 GMT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* remotes/hreitz-gitlab/tags/pull-block-2022-03-07: (23 commits)
iotests/image-fleecing: test push backup with fleecing
iotests/image-fleecing: add test case with bitmap
iotests.py: add qemu_io_pipe_and_status()
iotests/image-fleecing: add test-case for fleecing format node
block: copy-before-write: realize snapshot-access API
block: introduce snapshot-access block driver
block/io: introduce block driver snapshot-access API
block/reqlist: add reqlist_wait_all()
block/dirty-bitmap: introduce bdrv_dirty_bitmap_status()
block/reqlist: reqlist_find_conflict(): use ranges_overlap()
block: intoduce reqlist
block/block-copy: add block_copy_reset()
block/copy-before-write: add bitmap open parameter
block/block-copy: block_copy_state_new(): add bitmap parameter
block/dirty-bitmap: bdrv_merge_dirty_bitmap(): add return value
block/block-copy: move copy_bitmap initialization to block_copy_state_new()
iotests: Write test output to TEST_DIR
tests/qemu-iotests/testrunner: Quote "case not run" lines in TAP mode
tests/qemu-iotests/040: Skip TestCommitWithFilters without 'throttle'
block: fix preallocate filter: don't do unaligned preallocate requests
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a Linux kernel bug present until v5.12 that prevents
booting with FEAT_LPA2 enabled. As a workaround for TCG,
disable this feature for machine versions prior to 7.0.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
There is a Linux kernel bug present until v5.12 that prevents
booting with FEAT_LPA2 enabled. As a workaround for TCG, allow
the feature to be disabled from -cpu max.
Since this kernel bug is present in the Fedora 31 image that
we test in avocado, disable lpa2 on the command-line.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This provides standard look and feel for the about panel and reduces
code.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20220227042241.1543-1-akihiko.odaki@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The trace_gicv3_icv_hppir_read trace event takes an integer value
which it uses to form the register name, which should be either
ICV_HPPIR0 or ICV_HPPIR1. We were passing in the 'grp' variable for
this, but that is either GICV3_G0 or GICV3_G1NS, which happen to be 0
and 2, which meant that tracing for the ICV_HPPIR1 register was
incorrectly printed as ICV_HPPIR2.
Use the same approach we do for all the other similar trace events,
and pass in 'ri->crm == 8 ? 0 : 1', deriving the index value
directly from the ARMCPRegInfo struct.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303202341.2232284-6-peter.maydell@linaro.org
We forgot a space in some log messages, so the output ended
up looking like
gicv3_dist_write: invalid guest write at offset 0000000000008000size 8
with a missing space before "size". Add the missing spaces.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303202341.2232284-5-peter.maydell@linaro.org
The GICv3 has some registers that support byte accesses, and some
that support 8-byte accesses. Our TCG implementation implements all
of this, switching on the 'size' argument and handling the registers
that must support reads of that size while logging an error for
attempted accesses to registers that do not support that size access.
However we forgot to tell the core memory subsystem about this by
specifying the .impl and .valid fields in the MemoryRegionOps struct,
so the core was happily simulating 8 byte accesses by combining two 4
byte accesses. This doesn't have much guest-visible effect, since
there aren't many 8 byte registers and they all support being written
in two 4 byte parts.
Set the .impl and .valid fields to say that all sizes from 1 to 8
bytes are both valid and implemented by the device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303202341.2232284-4-peter.maydell@linaro.org
For debugging guest use of the ITS, it can be helpful to trace
when the ITS reads and writes the in-memory tables.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303202341.2232284-3-peter.maydell@linaro.org
When debugging code that's using the ITS, it's helpful to
see tracing of the ITS commands that the guest executes. Add
suitable trace events.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303202341.2232284-2-peter.maydell@linaro.org
For VLD3 (single 3-element structure to one lane), there is no
alignment specification and the alignment bits in the instruction
must be zero. This is bit [4] for the size=0 and size=1 cases, and
bits [5:4] for the size=2 case. We do this check correctly in
VLDST_single(), but we write it a bit oddly: in the 'case 3' code we
check for bit 0 of a->align (bit [4] of the insn), and then we fall
through to the 'case 2' code which checks bit 1 of a->align (bit [5]
of the insn) in the size 2 case. Replace this with just checking "is
a->align non-zero" for VLD3, which lets us drop the fall-through and
put the cases in this switch in numerical order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303113741.2156877-3-peter.maydell@linaro.org
For VLD1/VST1 (single element to one lane) we are only accessing one
register, and so the 'stride' is meaningless. The bits that would
specify stride (insn bit [4] for size=1, bit [6] for size=2) are
specified to be zero in the encoding (which would correspond to a
stride of 1 for VLD2/VLD3/VLD4 etc), and we must UNDEF if they are
not.
We failed to make this check, which meant that we would incorrectly
handle some instruction patterns as loads or stores instead of
UNDEFing them. Enforce that stride == 1 for the nregs == 1 case.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/890
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303113741.2156877-2-peter.maydell@linaro.org
Move the various memalign-related functions out of osdep.h and into
their own header, which we include only where they are used.
While we're doing this, add some brief documentation comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
qemu_vfree() is the companion free function to qemu_memalign(); put
it in memalign.c so the allocation and free functions are together.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220226180723.1706285-9-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instead of assuming that all CONFIG_BSD have valloc() and anything
else is memalign(), explicitly check for those functions in
meson.build and use the "is the function present" define. Tests for
specific functionality are better than which-OS checks; this also
lets us give a helpful error message if somehow there's no usable
function present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-8-peter.maydell@linaro.org
