There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122913.19561-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The helper function did not get updated when we reorganized
the vector register file for SVE. Since then, the neon dregs
are non-sequential and cannot be simply indexed.
At the same time, make the helper function operate on 64-bit
quantities so that we do not have to call it twice.
Fixes: c39c2b9043
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: use aa32_vfp_dreg() rather than opencoding]
Message-id: 20201105171126.88014-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is an aarch64-only function. Move it out of the shared file.
This patch is code movement only.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200302175829.2183-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only remaining use was in op_helper.c. Use PSTATE_SS
directly, and move the commentary so that it is more obvious
what is going on.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200208125816.14954-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CPSR_ERET_MASK was a useless renaming of CPSR_RESERVED.
The function also takes into account bits that the cpu
does not support.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200208125816.14954-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The wfi instruction can be configured to be trapped by a higher exception
level, such as the EL2 hypervisor. When the instruction is trapped, the
program counter should contain the address of the wfi instruction that
caused the exception. The program counter is adjusted for this in the wfi op
helper function.
However, this correction is done to env->pc, which only applies to AArch64
mode. For AArch32, the program counter is stored in env->regs[15]. This
adds an if-else statement to modify the correct program counter location
based on the the current CPU mode.
Signed-off-by: Jeff Kubascik <jeff.kubascik@dornerworks.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
HSTR_EL2 offers a way to trap ranges of CP15 system register
accesses to EL2, and it looks like this register is completely
ignored by QEMU.
To avoid adding extra .accessfn filters all over the place (which
would have a direct performance impact), let's add a new TB flag
that gets set whenever HSTR_EL2 is non-zero and that QEMU translates
a context where this trap has a chance to apply, and only generate
the extra access check if the hypervisor is actively using this feature.
Tested with a hand-crafted KVM guest accessing CBAR.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191201122018.25808-5-maz@kernel.org
[PMM: use is_a64(); fix comment syntax]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Continue setting, but not relying upon, env->hflags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Begin setting, but not relying upon, env->hflags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace x = double_saturate(y) with x = add_saturate(y, y).
There is no need for a separate more specialized helper.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190807045335.1361-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most Arm architectural debug exceptions (eg watchpoints) are ignored
if the configured "debug exception level" is below the current
exception level (so for example EL1 can't arrange to get debug exceptions
for EL2 execution). Exceptions generated by the BRK or BPKT instructions
are a special case -- they must always cause an exception, so if
we're executing above the debug exception level then we
must take them to the current exception level.
This fixes a bug where executing BRK at EL2 could result in an
exception being taken at EL1 (which is strictly forbidden by the
architecture).
Fixes: https://bugs.launchpad.net/qemu/+bug/1838277
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190730132522.27086-1-peter.maydell@linaro.org
These routines are TCG specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701194942.10092-2-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These routines are TCG specific.
The arm_deliver_fault() function is only used within the new
helper. Make it static.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-13-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Those helpers are a software implementation of the ARM v8 memory zeroing
op code. They should be moved to the op helper file, which is going to
eventually be built only when TCG is enabled.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Robert Bradford <robert.bradford@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-10-philmd@redhat.com
[PMD: Rebased]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit 8c06fbdf36 checkpatch.pl enforce a new multiline
comment syntax. Since we'll move this code around, fix its style
first.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-8-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace arm_env_get_cpu with env_archcpu. The combination
CPU(arm_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not need an out-of-line helper for manipulating bits in pstate.
While changing things, share the implementation of gen_ss_advance.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The EL0+UMA check is unique to DAIF. While SPSel had avoided the
check by nature of already checking EL >= 1, the other post v8.0
extensions to MSR (imm) allow EL0 and do not require UMA. Avoid
the unconditional write to pc and use raise_exception_ra to unwind.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is only used by AArch64. Code movement only.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This path uses cpu_loop_exit_restore to unwind current processor state.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since arm_hcr_el2_eff includes a check against
arm_is_secure_below_el3, we can often remove a
nearby check against secure state.
In some cases, sort the call to arm_hcr_el2_eff
to the end of a short-circuit logical sequence.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181210150501.7990-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit fixes a case where the CPU would try to go to EL3 when
executing an smc instruction, even though ARM_FEATURE_EL3 is false. This
case is raised when the PSCI conduit is set to smc, but the smc
instruction does not lead to a valid PSCI call.
QEMU crashes with an assertion failure latter on because of incoherent
mmu_idx.
This commit refactors the pre_smc helper by enumerating all the possible
way of handling an scm instruction, and covering the previously missing
case leading to the crash.
The following minimal test would crash before this commit:
.global _start
.text
_start:
ldr x0, =0xdeadbeef ; invalid PSCI call
smc #0
run with the following command line:
aarch64-linux-gnu-gcc -nostdinc -nostdlib -Wl,-Ttext=40000000 \
-o test test.s
qemu-system-aarch64 -M virt,virtualization=on,secure=off \
-cpu cortex-a57 -kernel test
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20181117160213.18995-1-luc.michel@greensocs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hyp mode is an exception to the general rule that each AArch32
mode has its own r13, r14 and SPSR -- it has a banked r13 and
SPSR but shares its r14 with User and System mode. We were
incorrectly implementing it as banked, which meant that on
entry to Hyp mode r14 was 0 rather than the USR/SYS r14.
We provide a new function r14_bank_number() which is like
the existing bank_number() but provides the index into
env->banked_r14[]; bank_number() provides the index to use
for env->banked_r13[] and env->banked_cpsr[].
All the points in the code that were using bank_number()
to index into env->banked_r14[] are updated for consintency:
* switch_mode() -- this is the only place where we fix
an actual bug
* aarch64_sync_32_to_64() and aarch64_sync_64_to_32():
no behavioural change as we already special-cased Hyp R14
* kvm32.c: no behavioural change since the guest can't ever
be in Hyp mode, but conceptually the right thing to do
* msr_banked()/mrs_banked(): we can never get to the case
that accesses banked_r14[] with tgtmode == ARM_CPU_MODE_HYP,
so no behavioural change
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181109173553.22341-2-peter.maydell@linaro.org
Create and use a utility function to extract the EC field
from a syndrome, rather than open-coding the shift.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-9-peter.maydell@linaro.org
At present we assert:
arm_el_is_aa64: Assertion `el >= 1 && el <= 3' failed.
The comment in arm_el_is_aa64 explains why asking about EL0 without
extra information is impossible. Add an extra argument to provide
it from the surrounding context.
Fixes: 0ab5953b00
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181008212205.17752-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check the v8M stack limits when pushing the frame for a
non-secure function call via BLXNS.
In order to be able to generate the exception we need to
promote raise_exception() from being local to op_helper.c
so we can call it from helper.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-8-peter.maydell@linaro.org
Add code to insert calls to a helper function to do the stack
limit checking when we handle these forms of instruction
that write to SP:
* ADD (SP plus immediate)
* ADD (SP plus register)
* SUB (SP minus immediate)
* SUB (SP minus register)
* MOV (register)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-5-peter.maydell@linaro.org
SVE vector length can change when changing EL, or when writing
to one of the ZCR_ELn registers.
For correctness, our implementation requires that predicate bits
that are inaccessible are never set. Which means noticing length
changes and zeroing the appropriate register bits.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The MSR (banked) and MRS (banked) instructions allow accesses to ELR_Hyp
from either Monitor or Hyp mode. Our translate time check
was overly strict and only permitted access from Monitor mode.
The runtime check we do in msr_mrs_banked_exc_checks() had the
correct code in it, but never got there because of the earlier
"currmode == tgtmode" check. Special case ELR_Hyp.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-9-peter.maydell@linaro.org
Whene we raise a synchronous exception, if HCR_EL2.TGE is set then
exceptions targeting NS EL1 must be redirected to EL2. Implement
this in raise_exception() -- all synchronous exceptions go through
this function.
(Asynchronous exceptions go via arm_cpu_exec_interrupt(), which
already honours HCR_EL2.TGE when it determines the target EL
in arm_phys_excp_target_el().)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180724115950.17316-4-peter.maydell@linaro.org
Because the design of the PMU requires that the counter values be
converted between their delta and guest-visible forms for mode
filtering, an additional hook which occurs before the EL is changed is
necessary.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Message-id: 1523997485-1905-8-git-send-email-alindsay@codeaurora.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In icount mode, instructions that access io memory spaces in the middle
of the translation block invoke TB recompilation. After recompilation,
such instructions become last in the TB and are allowed to access io
memory spaces.
When the code includes instruction like i386 'xchg eax, 0xffffd080'
which accesses APIC, QEMU goes into an infinite loop of the recompilation.
This instruction includes two memory accesses - one read and one write.
After the first access, APIC calls cpu_report_tpr_access, which restores
the CPU state to get the current eip. But cpu_restore_state_from_tb
resets the cpu->can_do_io flag which makes the second memory access invalid.
Therefore the second memory access causes a recompilation of the block.
Then these operations repeat again and again.
This patch moves resetting cpu->can_do_io flag from
cpu_restore_state_from_tb to cpu_loop_exit* functions.
It also adds a parameter for cpu_restore_state which controls restoring
icount. There is no need to restore icount when we only query CPU state
without breaking the TB. Restoring it in such cases leads to the
incorrect flow of the virtual time.
In most cases new parameter is true (icount should be recalculated).
But there are two cases in i386 and openrisc when the CPU state is only
queried without the need to break the TB. This patch fixes both of
these cases.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180409091320.12504.35329.stgit@pasha-VirtualBox>
[rth: Make can_do_io setting unconditional; move from cpu_exec;
make cpu_loop_exit_{noexc,restore} call cpu_loop_exit.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For debug exceptions due to breakpoints or the BKPT instruction which
are taken to AArch32, the Fault Address Register is architecturally
UNKNOWN. We were using that as license to simply not set
env->exception.vaddress, but this isn't correct, because it will
expose to the guest whatever old value was in that field when
arm_cpu_do_interrupt_aarch32() writes it to the guest IFSR. That old
value might be a FAR for a previous guest EL2 or secure exception, in
which case we shouldn't show it to an EL1 or non-secure exception
handler. It might also be a non-deterministic value, which is bad
for record-and-replay.
Clear env->exception.vaddress before taking breakpoint debug
exceptions, to avoid this minor information leak.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180320134114.30418-5-peter.maydell@linaro.org
Now that we have a helper function specifically for the BRK and
BKPT instructions, we can set the exception.fsr there rather
than in arm_cpu_do_interrupt_aarch32(). This allows us to
use our new arm_debug_exception_fsr() helper.
In particular this fixes a bug where we were hardcoding the
short-form IFSR value, which is wrong if the target exception
level has LPAE enabled.
Fixes: https://bugs.launchpad.net/qemu/+bug/1756927
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180320134114.30418-4-peter.maydell@linaro.org
When a debug exception is taken to AArch32, it appears as a Prefetch
Abort, and the Instruction Fault Status Register (IFSR) must be set.
The IFSR has two possible formats, depending on whether LPAE is in
use. Factor out the code in arm_debug_excp_handler() which picks
an FSR value into its own utility function, update it to use
arm_fi_to_lfsc() and arm_fi_to_sfsc() rather than hard-coded constants,
and use the correct condition to select long or short format.
In particular this fixes a bug where we could select the short
format because we're at EL0 and the EL1 translation regime is
not using LPAE, but then route the debug exception to EL2 because
of MDCR_EL2.TDE and hand EL2 the wrong format FSR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180320134114.30418-3-peter.maydell@linaro.org
The MDCR_EL2.TDE bit allows the exception level targeted by debug
exceptions to be set to EL2 for code executing at EL0. We handle
this in the arm_debug_target_el() function, but this is only used for
hardware breakpoint and watchpoint exceptions, not for the exception
generated when the guest executes an AArch32 BKPT or AArch64 BRK
instruction. We don't have enough information for a translate-time
equivalent of arm_debug_target_el(), so instead make BKPT and BRK
call a special purpose helper which can do the routing, rather than
the generic exception_with_syndrome helper.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180320134114.30418-2-peter.maydell@linaro.org
The MC68040 MMU provides the size of the access that
triggers the page fault.
This size is set in the Special Status Word which
is written in the stack frame of the access fault
exception.
So we need the size in m68k_cpu_unassigned_access() and
m68k_cpu_handle_mmu_fault().
To be able to do that, this patch modifies the prototype of
handle_mmu_fault handler, tlb_fill() and probe_write().
do_unassigned_access() already includes a size parameter.
This patch also updates handle_mmu_fault handlers and
tlb_fill() of all targets (only parameter, no code change).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
Rather than passing a regno to the helper, pass pointers to the
vector register directly. This eliminates the need to pass in
the environment pointer and reduces the number of places that
directly access env->vfp.regs[].
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-5-richard.henderson@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of ignoring the response from address_space_ld*()
(indicating an attempt to read a page table descriptor from
an invalid physical address), use it to report the failure
correctly.
Since this is another couple of locations where we need to
decide the value of the ARMMMUFaultInfo ea bit based on a
MemTxResult, we factor out that operation into a helper
function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
cpu_restore_state officially supports being passed an address it can't
resolve the state for. As a result the checks in the helpers are
superfluous and can be removed. This makes the code consistent with
other users of cpu_restore_state.
Of course this does nothing to address what to do if cpu_restore_state
can't resolve the state but so far it seems this is handled elsewhere.
The change was made with included coccinelle script.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[rth: Fixed up comment indentation. Added second hunk to script to
combine cpu_restore_state and cpu_loop_exit.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All of the callers of get_phys_addr() and arm_tlb_fill() now ignore
the FSR values they return, so we can just remove the argument
entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-12-git-send-email-peter.maydell@linaro.org
Now that ARMMMUFaultInfo is guaranteed to have enough information
to construct a fault status code, we can pass it in to the
deliver_fault() function and let it generate the correct type
of FSR for the destination, rather than relying on the value
provided by get_phys_addr().
I don't think there are any cases the old code was getting
wrong, but this is more obviously correct.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-10-git-send-email-peter.maydell@linaro.org
WFI/E are often, but not always, 4 bytes long. When they are, we need to
set ARM_EL_IL_SHIFT in the syndrome register.
Pass the instruction length to HELPER(wfi), use it to decrement pc
appropriately and to pass an is_16bit flag to syn_wfx, which sets
ARM_EL_IL_SHIFT if needed.
Set dc->insn in both arm_tr_translate_insn and thumb_tr_translate_insn.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: alpine.DEB.2.10.1710241055160.574@sstabellini-ThinkPad-X260
[PMM: move setting of dc->insn for Thumb so it is correct for 32 bit insns]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thereby decoupling the resulting translated code from the current state
of the system.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This properly forwards SMC events to EL2 when PSCI is provided by QEMU
itself and, thus, ARM_FEATURE_EL3 is off.
Found and tested with the Jailhouse hypervisor. Solution based on
suggestions by Peter Maydell.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 4f243068-aaea-776f-d18f-f9e05e7be9cd@siemens.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For M profile we must clear the exclusive monitor on reset, exception
entry and exception exit. We weren't doing any of these things; fix
this bug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505137930-13255-3-git-send-email-peter.maydell@linaro.org
Implement the new do_transaction_failed hook for ARM, which should
cause the CPU to take a prefetch abort or data abort.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1504626814-23124-4-git-send-email-peter.maydell@linaro.org
Chetan Pant
Richard Henderson
Jeff Kubascik
Marc Zyngier
Peter Maydell
Philippe Mathieu-Daudé
Samuel Ortiz
Luc Michel
Aaron Lindsay
Pavel Dovgalyuk
Laurent Vivier
Alex Bennée
Stefano Stabellini
Emilio G. Cota
Jan Kiszka