CPU_RESOLVING_TYPE is a per-target definition, and is
irrelevant for other targets. Move it to "cpu.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231013140116.255-6-philmd@linaro.org>
Enforce the style described by commit 067109a11c ("docs/devel:
mention the spacing requirement for QOM"):
The first declaration of a storage or class structure should
always be the parent and leave a visual space between that
declaration and the new code. It is also useful to separate
backing for properties (options driven by the user) and internal
state to make navigation easier.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231013140116.255-2-philmd@linaro.org>
Add an API to check if a given CPU is compatible with the current
accelerator.
This will allow query-cpu-model-expansion to work properly in conditions
where QEMU supports both accelerators (TCG and KVM), QEMU is then
launched using TCG, and the API requests information about a KVM only
CPU (e.g. 'host' CPU).
KVM doesn't have such restrictions and, at least in theory, all CPUs
models should work with KVM. We will revisit this API in case we decide
to restrict the amount of KVM CPUs we support.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231018195638.211151-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The query-cpu-model-expansion API is capable of passing extra properties
to a given CPU model and tell callers if this custom configuration is
valid.
The RISC-V version of the API is not quite there yet. The reason is the
realize() flow in the TCG driver, where most of the validation is done
in tcg_cpu_realizefn(). riscv_cpu_finalize_features() is then used to
validate satp_mode for both TCG and KVM CPUs.
Our ARM friends uses a concept of 'finalize_features()', a step done in
the end of realize() where the CPU features are validated. We have a
riscv_cpu_finalize_features() helper that, at this moment, is only
validating satp_mode.
Re-use this existing helper to do all CPU extension validation we
required after at the end of realize(). Make it public to allow APIs to
use it. At this moment only the TCG driver requires a realize() time
validation, thus, to avoid adding accelerator specific helpers in the
API, riscv_cpu_finalize_features() uses
riscv_tcg_cpu_finalize_features() if we are running TCG. The API will
then use riscv_cpu_finalize_features() regardless of the current
accelerator.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231018195638.211151-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This change adds support for inserting virtual interrupts from HS-mode
into VS-mode using hvien and hvip csrs. This also allows for IRQ filtering
from HS-mode.
Also, the spec doesn't mandate the interrupt to be actually supported
in hardware. Which allows HS-mode to assert virtual interrupts to VS-mode
that have no connection to any real interrupt events.
This is defined as part of the AIA specification [0], "6.3.2 Virtual
interrupts for VS level".
[0]: https://github.com/riscv/riscv-aia/releases/download/1.0/riscv-interrupts-1.0.pdf
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231016111736.28721-7-rkanwal@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This change adds support for inserting virtual interrupts from M-mode
into S-mode using mvien and mvip csrs. IRQ filtering is a use case of
this change, i-e M-mode can stop delegating an interrupt to S-mode and
instead enable it in MIE and receive those interrupts in M-mode and then
selectively inject the interrupt using mvien and mvip.
Also, the spec doesn't mandate the interrupt to be actually supported
in hardware. Which allows M-mode to assert virtual interrupts to S-mode
that have no connection to any real interrupt events.
This is defined as part of the AIA specification [0], "5.3 Interrupt
filtering and virtual interrupts for supervisor level".
[0]: https://github.com/riscv/riscv-aia/releases/download/1.0/riscv-interrupts-1.0.pdf
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231016111736.28721-6-rkanwal@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This is to allow virtual interrupts to be inserted into S and VS
modes. Given virtual interrupts will be maintained in separate
mvip and hvip CSRs, riscv_cpu_update_mip will no longer be in the
path and interrupts need to be triggered for these cases from
rmw_hvip64 and rmw_mvip64 functions.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231016111736.28721-5-rkanwal@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At this moment there are eleven CPU extension properties that starts
with capital 'Z': Zifencei, Zicsr, Zihintntl, Zihintpause, Zawrs, Zfa,
Zfh, Zfhmin, Zve32f, Zve64f and Zve64d. All other extensions are named
with lower-case letters.
We want all properties to be named with lower-case letters since it's
consistent with the riscv-isa string that we create in the FDT. Having
these 11 properties to be exceptions can be confusing.
Deprecate all of them. Create their lower-case counterpart to be used as
maintained CPU properties. When trying to use any deprecated property a
warning message will be displayed, recommending users to switch to the
lower-case variant:
./build/qemu-system-riscv64 -M virt -cpu rv64,Zifencei=true --nographic
qemu-system-riscv64: warning: CPU property 'Zifencei' is deprecated. Please use 'zifencei' instead
This will give users some time to change their scripts before we remove
the capital 'Z' properties entirely.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231009112817.8896-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll introduce generic errors that will output a CPU type name via its
RISCVCPU pointer. Create a helper for that.
Use the helper in tcg_cpu_realizefn() instead of hardcoding the 'host'
CPU name.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230926183109.165878-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Priv spec validation is TCG specific. Move it to the TCG accel class.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230925175709.35696-20-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This array will be read by the TCG accel class, allowing it to handle
priv spec verifications on its own. The array will remain here in cpu.c
because it's also used by the riscv,isa string function.
To export it we'll finish it with an empty element since ARRAY_SIZE()
won't work outside of cpu.c. Get rid of its ARRAY_SIZE() usage now to
alleviate the changes for the next patch.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-19-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All code related to MISA TCG properties is also moved.
At this point, all TCG properties handling is done in tcg-cpu.c, all KVM
properties handling is done in kvm-cpu.c.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-18-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
tcg_cpu_instance_init() will be the 'cpu_instance_init' impl for the TCG
accelerator. It'll be called from within riscv_cpu_post_init(), via
accel_cpu_instance_init(), similar to what happens with KVM. In fact, to
preserve behavior, the implementation will be similar to what
riscv_cpu_post_init() already does.
In this patch we'll move riscv_cpu_add_user_properties() and
riscv_init_max_cpu_extensions() and all their dependencies to tcg-cpu.c.
All multi-extension properties code was moved. The 'multi_ext_user_opts'
hash table was also moved to tcg-cpu.c since it's a TCG only structure,
meaning that we won't have to worry about initializing a TCG hash table
when running a KVM CPU anymore.
riscv_cpu_add_user_properties() will remain in cpu.c for now due to how
much code it requires to be moved at the same time. We'll do that in the
next patch.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-16-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll move riscv_init_max_cpu_extensions() to tcg-cpu.c in the next
patch and set_misa() needs to be usable from there.
Rename it to riscv_cpu_set_misa() and make it public.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-15-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_cpu_add_misa_properties() is being used to fill the missing KVM
MISA properties but it is a TCG helper that was adapted to do so. We'll
move it to tcg-cpu.c in the next patches, meaning that KVM needs to fill
the remaining MISA properties on its own.
Do not use riscv_cpu_add_misa_properties(). Let's create a new array
with all available MISA bits we support that can be read by KVM. The
array is zero terminate to allow us to iterate through it without
knowing its size.
Then, inside kvm_riscv_add_cpu_user_properties(), we'll create all KVM
MISA properties as usual and then use this array to add any missing MISA
properties with the riscv_cpu_add_kvm_unavail_prop() helper.
Note that we're creating misa_bits[], and not using the existing
'riscv_single_letter_exts[]', because the latter is tuned for riscv,isa
related functions and it doesn't have all MISA bits we support. Commit
0e2c377023 ("target/riscv: misa to ISA string conversion fix") has the
full context.
While we're at it, move both satp and the multi-letter extension
properties to kvm_riscv_add_cpu_user_properties() as well.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-14-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This function is used for both accelerators. Make it public, and call it
from kvm_riscv_cpu_add_kvm_properties(). This will make it easier to
split KVM specific code for the KVM accelerator class in the next patch.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll introduce the KVM accelerator class with a 'cpu_instance_init'
implementation that is going to be invoked during the common
riscv_cpu_post_init() (via accel_cpu_instance_init()). This
instance_init will execute KVM exclusive code that TCG doesn't care
about, such as adding KVM specific properties, initing registers using a
KVM scratch CPU and so on.
The core of the forementioned cpu_instance_init impl is the current
riscv_cpu_add_kvm_properties() that is being used by the common code via
riscv_cpu_add_user_properties() in cpu.c. Move it to kvm.c, together
will all the relevant artifacts, exporting and renaming it to
kvm_riscv_cpu_add_kvm_properties() so cpu.c can keep using it for now.
To make this work we'll need to export riscv_cpu_extensions,
riscv_cpu_vendor_exts and riscv_cpu_experimental_exts from cpu.c as
well. The TCG accelerator will also need to access those in the near
future so this export will benefit us in the long run.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the remaining of riscv_tcg_ops now that we have a working realize()
implementation.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This function is the core of the RISC-V validations for TCG CPUs, and it
has a lot going on.
Functions in cpu.c were made public to allow them to be used by the KVM
accelerator class later on. 'cpu_cfg_ext_get_min_version()' is notably
hard to move it to another file due to its dependency with isa_edata_arr[]
array, thus make it public and use it as is for now.
riscv_cpu_validate_set_extensions() is kept public because it's used by
csr.c in write_misa().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
target/riscv/cpu.c needs to handle all possible accelerators (TCG and
KVM at this moment) during both init() and realize() time. This forces
us to resort to a lot of "if tcg" and "if kvm" throughout the code,
which isn't wrong, but can get cluttered over time. Splitting
acceleration specific code from cpu.c to its own file will help to
declutter the existing code and it will also make it easier to support
KVM/TCG only builds in the future.
We'll start by adding a new subdir called 'tcg' and a new file called
'tcg-cpu.c'. This file will be used to introduce a new accelerator class
for TCG acceleration in RISC-V, allowing us to center all TCG exclusive
code in its file instead of using 'cpu.c' for everything. This design is
inpired by the work Claudio Fontana did in x86 a few years ago in commit
f5cc5a5c1 ("i386: split cpu accelerators from cpu.c, using
AccelCPUClass").
To avoid moving too much code at once we'll start by adding the new file
and TCG AccelCPUClass declaration. The 'class_init' from the accel class
will init 'tcg_ops', relieving the common riscv_cpu_class_init() from
doing it.
'riscv_tcg_ops' is being exported from 'cpu.c' for now to avoid having
to deal with moving code and files around right now. We'll focus on
decoupling the realize() logic first.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V KVM driver uses a CPUCFG() macro that calculates the offset
of a certain field in the struct RISCVCPUConfig. We're going to use this
macro in target/riscv/cpu.c as well in the next patches. Make it public.
Rename it to CPU_CFG_OFFSET() for more clarity while we're at it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230912132423.268494-15-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Retain the separate structure to emphasize its importance.
Enforce CPUArchState always follows CPUState without padding.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Next patch will add KVM specific user properties for both MISA and
multi-letter extensions. For MISA extensions we want to make use of what
is already available in misa_ext_cfgs[] to avoid code repetition.
misa_ext_info_arr[] array will hold name and description for each MISA
extension that misa_ext_cfgs[] is declaring. We'll then use this new
array in KVM code to avoid duplicating strings. Two getters were added
to allow KVM to retrieve the 'name' and 'description' for each MISA
property.
There's nothing holding us back from doing the same with multi-letter
extensions. For now doing just with MISA extensions is enough.
It is worth documenting that even using the __bultin_ctz() directive to
populate the misa_ext_info_arr[] we are forced to assign 'name' and
'description' during runtime in riscv_cpu_add_misa_properties(). The
reason is that some Gitlab runners ('clang-user' and 'tsan-build') will
throw errors like this if we fetch 'name' and 'description' from the
array in the MISA_CFG() macro:
../target/riscv/cpu.c:1624:5: error: initializer element is not a
compile-time constant
MISA_CFG(RVA, true),
^~~~~~~~~~~~~~~~~~~
../target/riscv/cpu.c:1619:53: note: expanded from macro 'MISA_CFG'
{.name = misa_ext_info_arr[MISA_INFO_IDX(_bit)].name, \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
gcc and others compilers/builders were fine with that change. We can't
ignore failures in the Gitlab pipeline though, so code was changed to
make every runner happy.
As a side effect, misa_ext_cfg[] is no longer a 'const' array because
it must be set during runtime.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As specified in privilege spec:"When MPRV=1, load and store memory
addresses are treated as though the current XLEN were set to MPP’s
XLEN". So the xlen for address may be different from current xlen.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230614032547.35895-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
These fields shouldn't be accessed when KVM is not available.
Restrict the KVM timer migration state. Rename the KVM timer
post_load() handler accordingly, because cpu_post_load() is
too generic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230626232007.8933-3-philmd@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-4-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split RISCVCPUConfig declarations to prepare for passing it to disas.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230523093539.203909-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
write_misa() must use as much common logic as possible. We want to open
code just the bits that are exclusive to the CSR write operation and TCG
internals.
Our validation is done with riscv_cpu_validate_set_extensions(), but we
need a small tweak first. When enabling RVG we're doing:
env->misa_ext |= RVI | RVM | RVA | RVF | RVD;
env->misa_ext_mask = env->misa_ext;
This works fine for realize() time but this can potentially overwrite
env->misa_ext_mask if we reutilize the function for write_misa().
Instead of doing misa_ext_mask = misa_ext, sum up the RVG extensions in
misa_ext_mask as well. This won't change realize() time behavior
(misa_ext_mask will be == misa_ext) and will ensure that write_misa()
won't change misa_ext_mask by accident.
After that, rewrite write_misa() to work as follows:
- mask the write using misa_ext_mask to avoid enabling unsupported
extensions;
- suppress RVC if the next insn isn't aligned;
- disable RVG if any of RVG dependencies are being disabled by the user;
- assign env->misa_ext and run riscv_cpu_validate_set_extensions(). On
error, rollback env->misa_ext to its original value, logging a
GUEST_ERROR to inform the user about the failed write;
- handle RVF and MSTATUS_FS and continue as usual.
Let's keep write_misa() as experimental for now until this logic gains
enough mileage.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230517135714.211809-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All these generic CPUs are using the latest priv available, at this
moment PRIV_VERSION_1_12_0:
- riscv_any_cpu_init()
- rv32_base_cpu_init()
- rv64_base_cpu_init()
- rv128_base_cpu_init()
Create a new PRIV_VERSION_LATEST enum and use it in those cases. I'll
make it easier to update everything at once when a new priv version is
available.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QMP CPU commands are usually implemented by a separated file,
<arch>-qmp-cmds.c, to allow them to be build only for softmmu targets.
This file uses a CPU QOM header with basic QOM declarations for the
arch.
We'll introduce query-cpu-definitions for RISC-V CPUs in the next patch,
but first we need a cpu-qom.h header with the definitions of
TYPE_RISCV_CPU and RISCVCPUClass declarations. These were moved from
cpu.h to the new file, and cpu.h now includes "cpu-qom.h".
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230411183511.189632-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move and rename riscv_cpu_two_stage_lookup, to match
the other mmuidx_* functions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-15-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-15-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implement these instructions via helpers, in expectation
of determining the mmu_idx to use at runtime. This allows
the permission check to also be moved out of line, which
allows HLSX to be removed from TB_FLAGS.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-11-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-11-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Kernel needs to access user mode memory e.g. during syscalls, the window
is usually opened up for a very limited time through MSTATUS.SUM, the
overhead is too much if tlb_flush() gets called for every SUM change.
This patch creates a separate MMU index for S+SUM, so that it's not
necessary to flush tlb anymore when SUM changes. This is similar to how
ARM handles Privileged Access Never (PAN).
Result of 'pipe 10' from unixbench boosts from 223656 to 1705006. Many
other syscalls benefit a lot from this too.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fei Wu <fei2.wu@intel.com>
Message-Id: <20230324054154.414846-3-fei2.wu@intel.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-8-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-8-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently it's assumed the 2 low bits of mmu_idx map to privilege mode,
this assumption won't last as we are about to add more mmu_idx. Here an
individual priv field is added into TB_FLAGS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fei Wu <fei2.wu@intel.com>
Message-Id: <20230324054154.414846-2-fei2.wu@intel.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-7-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-7-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Once we mistook the vstart directly from the env->vstart. As env->vstart is not
a constant, we should record it in the tb flags if we want to use
it in translation.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230324143031.1093-5-zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-6-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-6-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Merge with mstatus_{fs,vs}. We might perform a redundant
assignment to one or the other field, but it's a trivial
and saves 4 bits from TB_FLAGS.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-5-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-5-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reuse the MSTATUS_FS and MSTATUS_VS for the tb flags positions is not a
normal way.
It will make it hard to change the tb flags layout. And even worse, if we
want to keep tb flags for a same extension togather without a hole.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230324143031.1093-4-zhiwei_liu@linux.alibaba.com>
[rth: Adjust trans_rvf.c.inc as well; use the typedef]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-4-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-4-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The pointer masking is the only extension that directly use status.
The vector or float extension uses the status in an indirect way.
Replace the pointer masking extension special status fields with
the general status.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230324143031.1093-3-zhiwei_liu@linux.alibaba.com>
[rth: Add a typedef for the enum]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-3-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-3-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Virt enabled state is not a constant, so we should put it into tb flags.
Thus we can use it like a constant condition at translation phase.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230324143031.1093-2-zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-2-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-2-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
PRV_H has no real meaning, but just a reserved privilege mode currently.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230407014743.18779-3-liweiwei@iscas.ac.cn>
[ Changes by AF:
- Convert one missing use of PRV_H
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The function is now a no-op for all cpu_init() callers that are setting
a non-zero misa value in set_misa(), since it's no longer used to sync
cpu->cfg props with env->misa_ext bits. Remove it in those cases.
While we're at it, rename the function to match what it's actually
doing: create user properties to set/remove CPU extensions. Make a note
that it will overwrite env->misa_ext with the defaults set by each user
property.
Update the MISA bits comment in cpu.h as well.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-21-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're still have one RISCVCPUConfig MISA flag, 'ext_g'. We'll remove it
the same way we did with the others: create a "g" RISCVCPUMisaExtConfig
property, remove the old "g" property, remove all instances of 'cfg.ext_g'
and use riscv_has_ext(env, RVG).
The caveat is that we don't have RVG, so add it. RVG will be used right
off the bat in set_misa() of rv64_thead_c906_cpu_init() because the CPU is
enabling G via the now removed 'ext_g' flag.
After this patch, there are no more MISA extensions represented by flags
in RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-20-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "v" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVV. Instances of cpu->cfg.ext_v and similar are
replaced with riscv_has_ext(env, RVV).
Remove the old "v" property and 'ext_v' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-17-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "j" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVJ. Instances of cpu->cfg.ext_j and similar are
replaced with riscv_has_ext(env, RVJ).
Remove the old "j" property and 'ext_j' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-16-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "h" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVH. Instances of cpu->cfg.ext_h and similar are
replaced with riscv_has_ext(env, RVH).
Remove the old "h" property and 'ext_h' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-15-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "u" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVU. Instances of cpu->cfg.ext_u and similar are
replaced with riscv_has_ext(env, RVU).
Remove the old "u" property and 'ext_u' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-14-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "s" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVS. Instances of cpu->cfg.ext_s and similar are
replaced with riscv_has_ext(env, RVS).
Remove the old "s" property and 'ext_s' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "m" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVM. Instances of cpu->cfg.ext_m and similar are
replaced with riscv_has_ext(env, RVM).
Remove the old "m" property and 'ext_m' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "e" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVE. Instances of cpu->cfg.ext_e and similar are
replaced with riscv_has_ext(env, RVE).
Remove the old "e" property and 'ext_e' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
