Since we *might* have user emulation with softmmu,
replace the system emulation check by !user emulation one.
Invert the #ifdef'ry in TCGCPUOps structure for clarity.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-6-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230612223456.33824-5-philmd@linaro.org
Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com>
[PMD: Split from bigger patch: 3/4]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: added a comment about RPI_FIRMWARE_CORE_CLK_RATE
really being SoC-specific]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Linux kernel added a flood check for RX data recently in commit
496a4471b7c3 ("serial: imx: work-around for hardware RX flood"). This
check uses the wake bit in the UART status register 2. The wake bit
indicates that the receiver detected a start bit on the RX line. If the
kernel sees a number of RX interrupts without the wake bit being set, it
treats this as spurious data and resets the UART port. imx_serial does
never set the wake bit and triggers the kernel's flood check.
This patch adds support for the wake bit. wake is set when we receive a
new character (it's not set for break events). It seems that wake is
cleared by the kernel driver, the hardware does not have to clear it
automatically after data was read.
The wake bit can be configured as an interrupt source. Support this
mechanism as well.
Co-developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a new machine xenpvh which creates a IOREQ server to register/connect with
Xen Hypervisor.
Optional: When CONFIG_TPM is enabled, it also creates a tpm-tis-device, adds a
TPM emulator and connects to swtpm running on host machine via chardev socket
and support TPM functionalities for a guest domain.
Extra command line for aarch64 xenpvh QEMU to connect to swtpm:
-chardev socket,id=chrtpm,path=/tmp/myvtpm2/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-machine tpm-base-addr=0x0c000000 \
swtpm implements a TPM software emulator(TPM 1.2 & TPM 2) built on libtpms and
provides access to TPM functionality over socket, chardev and CUSE interface.
Github repo: https://github.com/stefanberger/swtpm
Example for starting swtpm on host machine:
mkdir /tmp/vtpm2
swtpm socket --tpmstate dir=/tmp/vtpm2 \
--ctrl type=unixio,path=/tmp/vtpm2/swtpm-sock &
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This is done to prepare for enabling xenpv support for ARM architecture.
On ARM it is possible to have a functioning xenpv machine with only the
PV backends and no IOREQ server. If the IOREQ server creation fails,
continue to the PV backends initialization.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Paul Durrant <paul@xen.org>
This patch does following:
1. creates arch_handle_ioreq() and arch_xen_set_memory(). This is done in
preparation for moving most of xen-hvm code to an arch-neutral location,
move the x86-specific portion of xen_set_memory to arch_xen_set_memory.
Also, move handle_vmport_ioreq to arch_handle_ioreq.
2. Pure code movement: move common functions to hw/xen/xen-hvm-common.c
Extract common functionalities from hw/i386/xen/xen-hvm.c and move them to
hw/xen/xen-hvm-common.c. These common functions are useful for creating
an IOREQ server.
xen_hvm_init_pc() contains the architecture independent code for creating
and mapping a IOREQ server, connecting memory and IO listeners, initializing
a xen bus and registering backends. Moved this common xen code to a new
function xen_register_ioreq() which can be used by both x86 and ARM machines.
Following functions are moved to hw/xen/xen-hvm-common.c:
xen_vcpu_eport(), xen_vcpu_ioreq(), xen_ram_alloc(), xen_set_memory(),
xen_region_add(), xen_region_del(), xen_io_add(), xen_io_del(),
xen_device_realize(), xen_device_unrealize(),
cpu_get_ioreq_from_shared_memory(), cpu_get_ioreq(), do_inp(),
do_outp(), rw_phys_req_item(), read_phys_req_item(),
write_phys_req_item(), cpu_ioreq_pio(), cpu_ioreq_move(),
cpu_ioreq_config(), handle_ioreq(), handle_buffered_iopage(),
handle_buffered_io(), cpu_handle_ioreq(), xen_main_loop_prepare(),
xen_hvm_change_state_handler(), xen_exit_notifier(),
xen_map_ioreq_server(), destroy_hvm_domain() and
xen_shutdown_fatal_error()
3. Removed static type from below functions:
1. xen_region_add()
2. xen_region_del()
3. xen_io_add()
4. xen_io_del()
5. xen_device_realize()
6. xen_device_unrealize()
7. xen_hvm_change_state_handler()
8. cpu_ioreq_pio()
9. xen_exit_notifier()
4. Replace TARGET_PAGE_SIZE with XC_PAGE_SIZE to match the page side with Xen.
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
* Skip Vector set tail when vta is zero
* Move zc* out of the experimental properties
* Mask the implicitly enabled extensions in isa_string based on priv version
* Rework CPU extension validation and validate MISA changes
* Fixup PMP TLB cacheing errors
* Writing to pmpaddr and MML/MMWP correctly triggers TLB flushes
* Fixup PMP bypass checks
* Deny access if access is partially inside a PMP entry
* Correct OpenTitanState parent type/size
* Fix QEMU crash when NUMA nodes exceed available CPUs
* Fix pointer mask transformation for vector address
* Updates and improvements for Smstateen
* Support disas for Zcm* extensions
* Support disas for Z*inx extensions
* Remove unused decomp_rv32/64 value for vector instructions
* Enable PC-relative translation
* Assume M-mode FW in pflash0 only when "-bios none"
* Support using pflash via -blockdev option
* Add vector registers to log
* Clean up reference of Vector MTYPE
* Remove the check for extra Vector tail elements
* Smepmp: Return error when access permission not allowed in PMP
* Fixes for smsiaddrcfg and smsiaddrcfgh in AIA
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSJFRoACgkQr3yVEwxT
gBMUkg/8Cuhqpx+zy7MeouVkyhEjUuhtCWyr0WVZBJzDkVEOrlY6TyR0hb5/o1Js
LZf6ZMF6JQDN78bmUct8yFBZBGafey5tyonDCsnD7CNQuLPf2NSjTHhu9n5hKFqF
F8Mpn9iFu6k1pr0iF7FbCccVWuDb3P4h2PaM0iFhmf4uz42BCMYdgJThhvv38xlt
jr6A3dcjTpp8yB+iRCuhL2IU2XVee0XBiDUECqRXd0gmtOtqJNST8L+l8YkLy1VO
WUMe8RCO6NMP7BLJ383WwCDeiFTo0mJebZQ0eR/G1xEhy7c8BBMh/CgQmq2F3wDZ
Q0biaeozADgAaCC7aOAHI+1sAoMhOm1v2WhIVmh+XXUqT9856cKwc7DUPBmzb9Sj
N5Zh+t9WCnZG7qpfxvkDF0Y/aRODMHZ1BW5L/ky9yBtyuRwXOJ6VycZTFyRkSwnN
Gd/s9IClDOP1IP5s4TSMGGdelk4lH97x7fZE/2hxn59lp761JtMxbaEceBtqaBh8
zNMTNN/KHs8LeiIBI2ZZ+nQav452Y6XYBivQ7OdsI8xkjnjG9gfgXXjvX1TIh0ow
Hy5ZxtAtjXty49Gmjkx5VcBx4auJcnRDlLTzoZjTxq1te+gEWpw6O1EsEKasVLZe
uN6PxTOxS3nHvRvPgQc1xNUdhDRqBaYsju6b9YmMxz1uefAjGM0=
=fOTc
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230614' of https://github.com/alistair23/qemu into staging
Second RISC-V PR for 8.1
* Skip Vector set tail when vta is zero
* Move zc* out of the experimental properties
* Mask the implicitly enabled extensions in isa_string based on priv version
* Rework CPU extension validation and validate MISA changes
* Fixup PMP TLB cacheing errors
* Writing to pmpaddr and MML/MMWP correctly triggers TLB flushes
* Fixup PMP bypass checks
* Deny access if access is partially inside a PMP entry
* Correct OpenTitanState parent type/size
* Fix QEMU crash when NUMA nodes exceed available CPUs
* Fix pointer mask transformation for vector address
* Updates and improvements for Smstateen
* Support disas for Zcm* extensions
* Support disas for Z*inx extensions
* Remove unused decomp_rv32/64 value for vector instructions
* Enable PC-relative translation
* Assume M-mode FW in pflash0 only when "-bios none"
* Support using pflash via -blockdev option
* Add vector registers to log
* Clean up reference of Vector MTYPE
* Remove the check for extra Vector tail elements
* Smepmp: Return error when access permission not allowed in PMP
* Fixes for smsiaddrcfg and smsiaddrcfgh in AIA
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSJFRoACgkQr3yVEwxT
# gBMUkg/8Cuhqpx+zy7MeouVkyhEjUuhtCWyr0WVZBJzDkVEOrlY6TyR0hb5/o1Js
# LZf6ZMF6JQDN78bmUct8yFBZBGafey5tyonDCsnD7CNQuLPf2NSjTHhu9n5hKFqF
# F8Mpn9iFu6k1pr0iF7FbCccVWuDb3P4h2PaM0iFhmf4uz42BCMYdgJThhvv38xlt
# jr6A3dcjTpp8yB+iRCuhL2IU2XVee0XBiDUECqRXd0gmtOtqJNST8L+l8YkLy1VO
# WUMe8RCO6NMP7BLJ383WwCDeiFTo0mJebZQ0eR/G1xEhy7c8BBMh/CgQmq2F3wDZ
# Q0biaeozADgAaCC7aOAHI+1sAoMhOm1v2WhIVmh+XXUqT9856cKwc7DUPBmzb9Sj
# N5Zh+t9WCnZG7qpfxvkDF0Y/aRODMHZ1BW5L/ky9yBtyuRwXOJ6VycZTFyRkSwnN
# Gd/s9IClDOP1IP5s4TSMGGdelk4lH97x7fZE/2hxn59lp761JtMxbaEceBtqaBh8
# zNMTNN/KHs8LeiIBI2ZZ+nQav452Y6XYBivQ7OdsI8xkjnjG9gfgXXjvX1TIh0ow
# Hy5ZxtAtjXty49Gmjkx5VcBx4auJcnRDlLTzoZjTxq1te+gEWpw6O1EsEKasVLZe
# uN6PxTOxS3nHvRvPgQc1xNUdhDRqBaYsju6b9YmMxz1uefAjGM0=
# =fOTc
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 14 Jun 2023 03:17:14 AM CEST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230614' of https://github.com/alistair23/qemu: (60 commits)
hw/intc: If mmsiaddrcfgh.L == 1, smsiaddrcfg and smsiaddrcfgh are read-only.
target/riscv: Smepmp: Return error when access permission not allowed in PMP
target/riscv/vector_helper.c: Remove the check for extra tail elements
target/riscv/vector_helper.c: clean up reference of MTYPE
target/riscv: Fix initialized value for cur_pmmask
util/log: Add vector registers to log
docs/system: riscv: Add pflash usage details
riscv/virt: Support using pflash via -blockdev option
hw/riscv: virt: Assume M-mode FW in pflash0 only when "-bios none"
target/riscv: Remove pc_succ_insn from DisasContext
target/riscv: Enable PC-relative translation
target/riscv: Use true diff for gen_pc_plus_diff
target/riscv: Change gen_set_pc_imm to gen_update_pc
target/riscv: Change gen_goto_tb to work on displacements
target/riscv: Introduce cur_insn_len into DisasContext
target/riscv: Fix target address to update badaddr
disas/riscv.c: Remove redundant parentheses
disas/riscv.c: Fix lines with over 80 characters
disas/riscv.c: Remove unused decomp_rv32/64 value for vector instructions
disas/riscv.c: Support disas for Z*inx extensions
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
migrate_ignore_shared() is an optimization that avoids copying memory
that is visible and can be mapped on the target. However, a
memory-backend-ram or a memory-backend-memfd block with the RAM_SHARED
flag set is not migrated when migrate_ignore_shared() is true. This is
wrong, because the block has no named backing store, and its contents will
be lost. To fix, ignore shared memory iff it is a named file. Define a
new flag RAM_NAMED_FILE to distinguish this case.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <1686151116-253260-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In preparation for including the number of dirty pages in the
vfio_get_dirty_bitmap() tracepoint, return the number of dirty pages in
cpu_physical_memory_set_dirty_lebitmap() similar to
cpu_physical_memory_sync_dirty_bitmap().
To avoid counting twice when GLOBAL_DIRTY_RATE is enabled, stash the
number of bits set per bitmap quad in a variable (@nbits) and reuse it
there.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230530180556.24441-2-joao.m.martins@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Allows the struct to be embedded directly into device models without additional
allocation.
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230612081238.1742-3-shentey@gmail.com>
[PMD: Update MAINTAINERS entry and use SPDX license identifier]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Exporting ParallelState is a precondition for exporing TYPE_ISA_PARALLEL to be
performed in the next patch.
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230612081238.1742-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Added QEMU option 'vpu' to log vector extension registers such as gpr\fpu.
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230410124451.15929-2-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use pointer to pass more information of target to disasembler,
such as pass cpu.cfg related information in following commits.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
OpenTitanState is the 'machine' (or 'board') state: it isn't
a SysBus device, but inherits from the MachineState type.
Correct the instance size.
Doing so we avoid leaking an OpenTitanState pointer in
opentitan_machine_init().
Fixes: fe0fe4735e ("riscv: Initial commit of OpenTitan machine")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230520054510.68822-6-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Expand the DEFINE_MACHINE() macro, converting the class_init()
handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230520054510.68822-5-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QOM type names are usually defined as TYPE_FOO.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230520054510.68822-4-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This queue includes several assorted fixes for target/ppc emulation and
XIVE2. It also includes an openpic fix, an avocado fix for ppc64
binaries without slipr and a Kconfig change for MAC_NEWWORLD.
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZIR6uhYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFksQsA/jucd+qsZ9mmJ9SYVd4umMnC/4bC
i4CHo/XcHb0DzyBXAQCLxMA+KSTkP+yKv3edra4I5K9qjTW1H+pEOWamh1lvDw==
=EezE
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20230610' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2023-06-10:
This queue includes several assorted fixes for target/ppc emulation and
XIVE2. It also includes an openpic fix, an avocado fix for ppc64
binaries without slipr and a Kconfig change for MAC_NEWWORLD.
# -----BEGIN PGP SIGNATURE-----
#
# iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZIR6uhYcZGFuaWVsaGI0
# MTNAZ21haWwuY29tAAoJEDzZypbeAzFksQsA/jucd+qsZ9mmJ9SYVd4umMnC/4bC
# i4CHo/XcHb0DzyBXAQCLxMA+KSTkP+yKv3edra4I5K9qjTW1H+pEOWamh1lvDw==
# =EezE
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 10 Jun 2023 06:29:30 AM PDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20230610' of https://gitlab.com/danielhb/qemu: (29 commits)
hw/ppc/Kconfig: MAC_NEWWORLD should always select USB_OHCI_PCI
target/ppc: Implement gathering irq statistics
tests/avocado/tuxrun_baselines: Fix ppc64 tests for binaries without slirp
hw/ppc/openpic: Do not open-code ROUND_UP() macro
target/ppc: Decrementer fix BookE semantics
target/ppc: Fix decrementer time underflow and infinite timer loop
target/ppc: Rework store conditional to avoid branch
target/ppc: Remove larx/stcx. memory barrier semantics
target/ppc: Ensure stcx size matches larx
target/ppc: Fix lqarx to set cpu_reserve
target/ppc: Eliminate goto in mmubooke_check_tlb()
target/ppc: Change ppcemb_tlb_check() to return bool
target/ppc: Simplify ppcemb_tlb_search()
target/ppc: Remove some unneded line breaks
target/ppc: Move ppcemb_tlb_search() to mmu_common.c
target/ppc: Remove "ext" parameter of ppcemb_tlb_check()
target/ppc: Remove single use function
target/ppc: PMU implement PERFM interrupts
target/ppc: Support directed privileged doorbell interrupt (SDOOR)
target/ppc: Fix msgclrp interrupt type
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While reviewing, the ROUND_UP() macro is easier to figure out.
Besides, the comment confirms we want to round up here.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20230523061546.49031-1-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
TIMA addresses are somewhat special and are split in several bit
fields with different meanings. This patch describes it and introduce
macros to more easily access the various fields.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230601121331.487207-5-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
During the last patches, TYPE_PIIX3_XEN_DEVICE turned into a clone of
TYPE_PIIX3_DEVICE. Remove this redundancy.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Chuck Zmudzinski <brchuckz@aol.com>
Message-Id: <20230312120221.99183-7-shentey@gmail.com>
Message-Id: <20230403074124.3925-8-shentey@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
xen_piix3_set_irq() isn't PIIX specific: PIIX is a single PCI device
while xen_piix3_set_irq() maps multiple PCI devices to their respective
IRQs, which is board-specific. Rename xen_piix3_set_irq() to communicate
this.
Also rename XEN_PIIX_NUM_PIRQS to XEN_IOAPIC_NUM_PIRQS since the Xen's
IOAPIC rather than PIIX has this many interrupt routes.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Chuck Zmudzinski <brchuckz@aol.com>
Message-Id: <20230312120221.99183-2-shentey@gmail.com>
Message-Id: <20230403074124.3925-2-shentey@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
In restructuring to allow for internal emulation of Xen functionality,
I broke compatibility for Xen 4.6 and earlier. Fix this by explicitly
removing support for anything older than 4.7.1, which is also ancient
but it does still build, and the compatibility support for it is fairly
unintrusive.
Fixes: 15e283c5b6 ("hw/xen: Add foreignmem operations to allow redirection to internal emulation")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20230412185102.441523-4-dwmw2@infradead.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Only a few important registers are added, especially the SRAM_VER
register.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
R40 has two ethernet controllers named as emac and gmac. The emac is
compatibled with A10, and the GMAC is compatibled with H3.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A64's sd register was similar to H3, and it introduced a new register
named SAMP_DL_REG location at 0x144. The dma descriptor buffer size of
mmc2 is only 8K and the other mmc controllers has 64K.
Also fix allwinner-r40's mmc controller type.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Types of memory that the SDRAM controller supports are DDR2/DDR3
and capacities of up to 2GiB. This commit adds emulation support
of the Allwinner R40 SDRAM controller.
This driver only support 256M, 512M and 1024M memory now.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
TWI(i2c) is designed to be used as an interface between CPU host and the
serial 2-Wire bus. It can support all standard 2-Wire transfer, can be
operated in standard mode(100kbit/s) or fast-mode, supporting data rate
up to 400kbit/s.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
R40 has eight UARTs, support both 16450 and 16550 compatible modes.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CCU provides the registers to program the PLLs and the controls
most of the clock generation, division, distribution, synchronization
and gating.
This commit adds support for the Clock Control Unit which emulates
a simple read/write register interface.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allwinner R40 (sun8i) SoC features a Quad-Core Cortex-A7 ARM CPU,
and a Mali400 MP2 GPU from ARM. It's also known as the Allwinner T3
for In-Car Entertainment usage, A40i and A40pro are variants that
differ in applicable temperatures range (industrial and military).
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect CANFD0 and CANFD1 on the Versal-virt machine and update xlnx-versal-virt
document with CANFD command line examples.
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Xilinx Versal CANFD controller is developed based on SocketCAN, QEMU CAN bus
implementation. Bus connection and socketCAN connection for each CAN module
can be set through command lines.
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Guests can now be debugged through the gdbstub. Support is added for
single-stepping, software breakpoints, hardware breakpoints and
watchpoints. The code has been structured like the KVM counterpart.
While guest debugging is enabled, the guest can still read and write the
DBG*_EL1 registers but they don't have any effect.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-5-fcagnin@quarkslab.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Required for guest debugging. The code has been structured like the KVM
counterpart.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-4-fcagnin@quarkslab.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qatomic_mb_read and qatomic_mb_set were the very first atomic primitives
introduced for QEMU; their semantics are unclear and they provide a false
sense of safety.
The last use of qatomic_mb_read() has been removed, so delete it.
qatomic_mb_set() instead can survive as an optimized
qatomic_set()+smp_mb(), similar to Linux's smp_store_mb(), but
rename it to qatomic_set_mb() to match the order of the two
operations.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If CONFIG_USER_ONLY is ok generically, so is CONFIG_SOFTMMU,
because they are exactly opposite.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Two headers are not required for the rest of the
contents of plugin-gen.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function is only used in translator.c, and uses a
target-specific typedef: abi_ptr.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This finally paves the way for tcg/ to be built once per mode.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since the change to CPUArchState, we have a common typedef
that can always be used.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reduce the header to only bswap.h and cpu_ldst.h.
Move exec/translate-all.h to translator.c.
Reduce tcg.h and tcg-op.h to tcg-op-common.h.
Remove otherwise unused headers.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is used by exactly one host in extraordinary circumstances.
This means that translator.h need not include plugin-gen.h;
translator.c already includes plugin-gen.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
New wrapper around gen_io_start which takes care of the USE_ICOUNT
check, as well as marking the DisasContext to end the TB.
Remove exec/gen-icount.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only usage of gen_tb_start and gen_tb_end are here.
Move the static icount_start_insn variable into a local
within translator_loop. Simplify the two subroutines
by passing in the existing local cflags variable.
Leave only the declaration of gen_io_start in gen-icount.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The last use was removed with 2ac01d6daf.
Fixes: 2ac01d6daf ("translate-all: use a binary search tree to track TBs in TBContext")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is all that is required by tcg/ from exec-all.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This makes TranslationBlock agnostic to the address size of the guest.
Use vaddr for pc, since that's always a virtual address.
Use uint64_t for cs_base, since usage varies between guests.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a step toward making TranslationBlock agnostic
to the address size of the guest.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create tcg/tcg-op-gvec-common.h, moving everything that does not
concern TARGET_LONG_BITS. Adjust tcg-op-gvec.c to use the new header.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The replacement isn't ideal, as the raw count of bits
is not easily synced with exec/cpu-all.h, but it does
remove from tcg.h the target dependency on TARGET_PAGE_BITS_MIN
which is built into TLB_FLAGS_MASK.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This replaces of TCG_GUEST_DEFAULT_MO in tcg-op-ldst.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will enable replacement of TARGET_INSN_START_WORDS in tcg.c.
Split out "tcg/insn-start-words.h" and use it in target/.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create helper-proto-common.h without the target specific portion.
Use that in tcg-op-common.h. Include helper-proto.h in target/arm
and target/hexagon before helper-info.c.inc; all other targets are
already correct in this regard.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create helper-gen-common.h without the target specific portion.
Use that in tcg-op-common.h. Reorg headers in target/arm to
ensure that helper-gen.h is included before helper-info.c.inc.
All other targets are already correct in this regard.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Make tcg_gen_callN a static function. Create tcg_gen_call[0-7]
functions for use by helper-gen.h.inc.
Removes a multiplicty of calls to __stack_chk_fail, saving up
to 143kiB of .text space as measured on an x86_64 host.
Old New Less %Change
8888680 8741816 146864 1.65% qemu-system-aarch64
5911832 5856152 55680 0.94% qemu-system-riscv64
5816728 5767512 49216 0.85% qemu-system-mips64
6707832 6659144 48688 0.73% qemu-system-ppc64
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Removes a multiplicity of calls to __assert_fail, saving up
to 360kiB of .text space as measured on an x86_64 host.
Old New Less %Change
9257272 8888680 368592 3.98% qemu-system-aarch64
6100968 5911832 189136 3.10% qemu-system-riscv64
5839112 5707032 132080 2.26% qemu-system-mips
4447608 4341752 105856 2.38% qemu-system-s390x
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for compiling tcg/ only once, eliminate
the all_helpers array. Instantiate the info structs for
the generic helpers in accel/tcg/, and the structs for
the target-specific helpers in each translate.c.
Since we don't see all of the info structs at startup,
initialize at first use, using g_once_init_* to make
sure we don't race while doing so.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will be required outside of tcg-internal.h soon.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create tcg/tcg-op-common.h, moving everything that does not concern
TARGET_LONG_BITS or TCGv. Adjust tcg/*.c to use the new header
instead of tcg-op.h, in preparation for compiling tcg/ only once.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These two items are the last uses of TARGET_LONG_BITS within tcg.h,
and are more in common with the other "_tl" definitions within that file.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move a use of TARGET_LONG_BITS out of tcg/tcg.h.
Include the new file only where required.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Often, the only thing we need to know about the TCG host
is the register size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect the layout of ArchCPU from TCG compilation.
Pass the relative offset of 'env' and 'neg.tlb.f' as a parameter.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This makes CPUTLBEntry agnostic to the address size of the guest.
When 32-bit addresses are in effect, we can simply read the low
32 bits of the 64-bit field. Similarly when we need to update
the field for setting TLB_NOTDIRTY.
For TCG backends that could in theory be big-endian, but in
practice are not (arm, loongarch, riscv), use QEMU_BUILD_BUG_ON
to document and ensure this is not accidentally missed.
For s390x, which is always big-endian, use HOST_BIG_ENDIAN anyway,
to document the reason for the adjustment.
For sparc64 and ppc64, always perform a 64-bit load, and rely on
the following 32-bit comparison to ignore the high bits.
Rearrange mips and ppc if ladders for clarity.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Removes the only use of TARGET_LONG_BITS from tcg.h, which is to be
target independent. Move the symbol to a define in tcg-op.h, which
will continue to be target dependent. Rather than complicate matters
for the use in tb_gen_code(), expand the definition there.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Fix padding of unaligned vectored requests to match the host alignment
for vectors with 1023 or 1024 buffers
- Refactor and fix bugs in parallels's image check functionality
- Add an option to the qcow2 driver to retain (qcow2-level) allocations
on discard requests from the guest (while still forwarding the discard
to the lower level and marking the range as zero)
-----BEGIN PGP SIGNATURE-----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=GuoL
-----END PGP SIGNATURE-----
Merge tag 'pull-block-2023-06-05' of https://gitlab.com/hreitz/qemu into staging
Block patches
- Fix padding of unaligned vectored requests to match the host alignment
for vectors with 1023 or 1024 buffers
- Refactor and fix bugs in parallels's image check functionality
- Add an option to the qcow2 driver to retain (qcow2-level) allocations
on discard requests from the guest (while still forwarding the discard
to the lower level and marking the range as zero)
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEy2LXoO44KeRfAE00ofpA0JgBnN8FAmR+AT4SHGhyZWl0ekBy
# ZWRoYXQuY29tAAoJEKH6QNCYAZzfnboQAKD6YrreZLoseomRfqOAoApSf6yOdcHk
# 6kfsvzwzjosomsF1Pkzm4851vX5PyDqTdeu0iViM+pxanVO1b494q1P4VcAERqMB
# iZVs68R6M0l6HV9btWFGm+ibHJf4FapdntkIdwog1ka5TIhw5oDWCVNLigjhIoRv
# sM37Bgf14kC3sFTR++0HESsyU1eUP5gJjwJbPZ2IgJBmzYay0is1z5nHA/3VUswu
# 8dKnGQDsv62EtlK7PK8cU2BhLOeNi6Wr3bAb6Wf2QLB5e0qRb7oAkqNx5/UcTznk
# a3XMC1aiWhYvM/+DaYIpQUcIPgA8xQ1KHKeD6WjbGfLgZBqseX0aGWMByUsiY8Bo
# +BPIBnUDrbiPnAKB/XLQfnzlE+s7121/JpEbB7AkZqVFRGuw8Wur4tbc2fzvy8Pw
# x/uQfv3ZPi/2Lf6u7hv/TVHubXi8jucVgx3Ubu5Jeo3901S4/KOQBQ4BQ/GYIGQX
# 38ijSROcEd0eQJ1mTKPEctouxjSZCghNSbrn9DfsL1V3VWqWNKKGCU3hM+RQ1SJT
# 688qvnyYt8QZfTsiDSHR/GfKsufG0DkoqE7c9IhSEPohecAH8Rrc3HcLut7fuwD2
# gCFQhm68CPwwRmBjPCY6Zi1RDzeOyFBSWN31T6t0yTb4OHJ/3/cSZVBJtwwkOVbx
# zwabHDNdY5Kw
# =GuoL
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 05 Jun 2023 08:37:34 AM PDT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* tag 'pull-block-2023-06-05' of https://gitlab.com/hreitz/qemu:
qcow2: add discard-no-unref option
parallels: Incorrect condition in out-of-image check
parallels: Replace qemu_co_mutex_lock by WITH_QEMU_LOCK_GUARD
parallels: Move statistic collection to a separate function
parallels: Move check of leaks to a separate function
parallels: Fix statistics calculation
parallels: Move check of cluster outside image to a separate function
parallels: Move check of unclean image to a separate function
parallels: Use generic infrastructure for BAT writing in parallels_co_check()
parallels: create parallels_set_bat_entry_helper() to assign BAT value
parallels: Fix image_end_offset and data_end after out-of-image check
parallels: Fix high_off calculation in parallels_co_check()
parallels: Out of image offset in BAT leads to image inflation
iotests/iov-padding: New test
util/iov: Remove qemu_iovec_init_extended()
block: Collapse padded I/O vecs exceeding IOV_MAX
util/iov: Make qiov_slice() public
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
bdrv_pad_request() was the main user of qemu_iovec_init_extended().
HEAD^ has removed that use, so we can remove qemu_iovec_init_extended()
now.
The only remaining user is qemu_iovec_init_slice(), which can easily
inline the small part it really needs.
Note that qemu_iovec_init_extended() offered a memcpy() optimization to
initialize the new I/O vector. qemu_iovec_concat_iov(), which is used
to replace its functionality, does not, but calls qemu_iovec_add() for
every single element. If we decide this optimization was important, we
will need to re-implement it in qemu_iovec_concat_iov(), which might
also benefit its pre-existing users.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230411173418.19549-4-hreitz@redhat.com>
We want to inline qemu_iovec_init_extended() in block/io.c for padding
requests, and having access to qiov_slice() is useful for this. As a
public function, it is renamed to qemu_iovec_slice().
(We will need to count the number of I/O vector elements of a slice
there, and then later process this slice. Without qiov_slice(), we
would need to call qemu_iovec_subvec_niov(), and all further
IOV-processing functions may need to skip prefixing elements to
accomodate for a qiov_offset. Because qemu_iovec_subvec_niov()
internally calls qiov_slice(), we can just have the block/io.c code call
qiov_slice() itself, thus get the number of elements, and also create an
iovec array with the superfluous prefixing elements stripped, so the
following processing functions no longer need to skip them.)
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230411173418.19549-2-hreitz@redhat.com>
The function is unused since commit
bdad3654d3 ('hw/arm/nseries: Remove
invalid/unnecessary n8x0_uart_setup()').
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230523195608.125820-3-shentey@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
As per "Loongson 3A5000/3B5000 Processor Reference Manual",
Loongson 3A5000's IPI implementation have 4 mailboxes per
core.
However, in 78464f023b ("hw/loongarch/virt: Modify ipi as
percpu device"), the number of IPI mailboxes was reduced to
one, which mismatches actual hardware.
It won't affect LoongArch based system as LoongArch boot code
only uses the first mailbox, however MIPS based Loongson boot
code uses all 4 mailboxes.
Fixes Coverity CID: 1512452, 1512453
Fixes: 78464f023b ("hw/loongarch/virt: Modify ipi as percpu device")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230521102307.87081-2-jiaxun.yang@flygoat.com>
Signed-off-by: Song Gao <gaosong@loongson.cn>
It's already confusing that we have two very similar functions for
wrapping the parse of a 64-bit unsigned value, differing mainly on
whether they permit leading '-'. Adjust the signature of parse_uint()
and parse_uint_full() to be like all of qemu_strto*(): put the result
parameter last, use the same types (uint64_t and unsigned long long
have the same width, but are not always the same type), and mark
endptr const (this latter change only affects the rare caller of
parse_uint). Adjust all callers in the tree.
While at it, note that since cutils.c already includes:
QEMU_BUILD_BUG_ON(sizeof(int64_t) != sizeof(long long));
we are guaranteed that the result of parse_uint* cannot exceed
UINT64_MAX (or the build would have failed), so we can drop
pre-existing dead comparisons in opts-visitor.c that were never false.
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-8-eblake@redhat.com>
[eblake: Drop dead code spotted by Markus]
Signed-off-by: Eric Blake <eblake@redhat.com>
The function is unused since previous commit. Drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230517123752.21615-4-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Actually global_state_store() can never fail. Let's get rid of extra
error paths.
To make things clear, use new runstate_get() and use same approach for
global_state_store() and global_state_store_running().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230517123752.21615-3-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It's necessary to restore the state after failed/cancelled migration in
further commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230517123752.21615-2-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now we no longer have dynamic state affecting things we can remove the
additional fields in cpu.h and simplify the TB hash calculation.
For the benchmark:
hyperfine -w 2 -m 20 \
"./arm-softmmu/qemu-system-arm -cpu cortex-a15 \
-machine type=virt,highmem=off \
-display none -m 2048 \
-serial mon:stdio \
-netdev user,id=unet,hostfwd=tcp::2222-:22 \
-device virtio-net-pci,netdev=unet \
-device virtio-scsi-pci \
-blockdev driver=raw,node-name=hd,discard=unmap,file.driver=host_device,file.filename=/dev/zen-disk/debian-bullseye-armhf \
-device scsi-hd,drive=hd -smp 4 \
-kernel /home/alex/lsrc/linux.git/builds/arm/arch/arm/boot/zImage \
-append 'console=ttyAMA0 root=/dev/sda2 systemd.unit=benchmark.service' \
-snapshot"
It has a marginal effect on runtime, before:
Time (mean ± σ): 26.279 s ± 2.438 s [User: 41.113 s, System: 1.843 s]
Range (min … max): 24.420 s … 32.565 s 20 runs
after:
Time (mean ± σ): 24.440 s ± 2.885 s [User: 34.474 s, System: 2.028 s]
Range (min … max): 21.663 s … 29.937 s 20 runs
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1358
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230526165401.574474-10-alex.bennee@linaro.org
Message-Id: <20230524133952.3971948-9-alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is pure duplication now. Both bsd-user and linux-user have
builtin strace support and we can also track syscalls via the plugins
system.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230526165401.574474-2-alex.bennee@linaro.org
Message-Id: <20230524133952.3971948-2-alex.bennee@linaro.org>
[Remove unused variable in do_freebsd_syscall() reported by Richard
Henderson.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
No block driver implements .bdrv_co_io_plug() anymore. Get rid of the
function pointers.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20230530180959.1108766-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stop using the .bdrv_co_io_plug() API because it is not multi-queue
block layer friendly. Use the new blk_io_plug_call() API to batch I/O
submission instead.
Note that a dev_max_batch check is dropped in laio_io_unplug() because
the semantics of unplug_fn() are different from .bdrv_co_unplug():
1. unplug_fn() is only called when the last blk_io_unplug() call occurs,
not every time blk_io_unplug() is called.
2. unplug_fn() is per-thread, not per-BlockDriverState, so there is no
way to get per-BlockDriverState fields like dev_max_batch.
Therefore this condition cannot be moved to laio_unplug_fn(). It is not
obvious that this condition affects performance in practice, so I am
removing it instead of trying to come up with a more complex mechanism
to preserve the condition.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230530180959.1108766-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stop using the .bdrv_co_io_plug() API because it is not multi-queue
block layer friendly. Use the new blk_io_plug_call() API to batch I/O
submission instead.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20230530180959.1108766-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce a new API for thread-local blk_io_plug() that does not
traverse the block graph. The goal is to make blk_io_plug() multi-queue
friendly.
Instead of having block drivers track whether or not we're in a plugged
section, provide an API that allows them to defer a function call until
we're unplugged: blk_io_plug_call(fn, opaque). If blk_io_plug_call() is
called multiple times with the same fn/opaque pair, then fn() is only
called once at the end of the function - resulting in batching.
This patch introduces the API and changes blk_io_plug()/blk_io_unplug().
blk_io_plug()/blk_io_unplug() no longer require a BlockBackend argument
because the plug state is now thread-local.
Later patches convert block drivers to blk_io_plug_call() and then we
can finally remove .bdrv_co_io_plug() once all block drivers have been
converted.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20230530180959.1108766-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- Separate __int128_t type and arithmetic detection
- Support 128-bit load/store in backend for i386, aarch64, ppc64, s390x
- Accelerate atomics via host/include/
Decodetree:
- Add named field syntax
- Move tests to meson
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmR2R10dHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/bsgf/XLi8q+ITyoEAKwG4
6ML7DktLAdIs9Euah9twqe16U0BM0YzpKfymBfVVBKKaIa0524N4ZKIT3h6EeJo+
f+ultqrpsnH+aQh4wc3ZCkEvRdhzhFT8VcoRTunJuJrbL3Y8n2ZSgODUL2a0tahT
Nn+zEPm8rzQanSKQHq5kyNBLpgTUKjc5wKfvy/WwttnFmkTnqzcuEA6nPVOVwOHC
lZBQCByIQWsHfFHUVJFvsFzBQbm0mAiW6FNKzPBkoXon0h/UZUI1lV+xXzgutFs+
zR2O8IZwLYRu2wOWiTF8Nn2qQafkB3Dhwoq3JTEXhOqosOPExbIiWlsZDlPiKRJk
bwmQlg==
=XQMb
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20230530' of https://gitlab.com/rth7680/qemu into staging
Improvements to 128-bit atomics:
- Separate __int128_t type and arithmetic detection
- Support 128-bit load/store in backend for i386, aarch64, ppc64, s390x
- Accelerate atomics via host/include/
Decodetree:
- Add named field syntax
- Move tests to meson
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmR2R10dHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/bsgf/XLi8q+ITyoEAKwG4
# 6ML7DktLAdIs9Euah9twqe16U0BM0YzpKfymBfVVBKKaIa0524N4ZKIT3h6EeJo+
# f+ultqrpsnH+aQh4wc3ZCkEvRdhzhFT8VcoRTunJuJrbL3Y8n2ZSgODUL2a0tahT
# Nn+zEPm8rzQanSKQHq5kyNBLpgTUKjc5wKfvy/WwttnFmkTnqzcuEA6nPVOVwOHC
# lZBQCByIQWsHfFHUVJFvsFzBQbm0mAiW6FNKzPBkoXon0h/UZUI1lV+xXzgutFs+
# zR2O8IZwLYRu2wOWiTF8Nn2qQafkB3Dhwoq3JTEXhOqosOPExbIiWlsZDlPiKRJk
# bwmQlg==
# =XQMb
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 30 May 2023 11:58:37 AM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-tcg-20230530' of https://gitlab.com/rth7680/qemu: (27 commits)
tests/decode: Add tests for various named-field cases
scripts/decodetree: Implement named field support
scripts/decodetree: Implement a topological sort
scripts/decodetree: Pass lvalue-formatter function to str_extract()
docs: Document decodetree named field syntax
tests/decode: Convert tests to meson
decodetree: Do not remove output_file from /dev
decodetree: Diagnose empty pattern group
decodetree: Fix recursion in prop_format and build_tree
decodetree: Add --test-for-error
tcg: Remove TCG_TARGET_TLB_DISPLACEMENT_BITS
accel/tcg: Add aarch64 store_atom_insert_al16
accel/tcg: Add aarch64 lse2 load_atom_extract_al16_or_al8
accel/tcg: Add x86_64 load_atom_extract_al16_or_al8
accel/tcg: Extract store_atom_insert_al16 to host header
accel/tcg: Extract load_atom_extract_al16_or_al8 to host header
tcg/s390x: Support 128-bit load/store
tcg/ppc: Support 128-bit load/store
tcg/aarch64: Support 128-bit load/store
tcg/aarch64: Simplify constraints on qemu_ld/st
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Older versions of clang have missing runtime functions for arithmetic
with -fsanitize=undefined (see 464e3671f9), so we cannot use
__int128_t for implementing Int128. But __int128_t is present,
data movement works, and it can be used for atomic128.
Probe for both CONFIG_INT128_TYPE and CONFIG_INT128, adjust
qemu/int128.h to define Int128Alias if CONFIG_INT128_TYPE,
and adjust the meson probe for atomics to use has_int128_type.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Fix blockdev-create with iothreads
- Remove aio_disable_external() API
-----BEGIN PGP SIGNATURE-----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=yuER
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- Fix blockdev-create with iothreads
- Remove aio_disable_external() API
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmR2JIARHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9brtA/9HVdAdtJxW78J60TE2lTqE9XlqMOEHBZl
# 8GN72trjP2geY/9mVsv/XoFie4ecqFsYjwAWWUuXZwLgAo53jh7oFN7gBH5iGyyD
# +EukYEfjqoykX5BkoK0gbMZZUe5Y4Dr2CNXYw4bNg8kDzj2RLifGA1XhdL3HoiVt
# PHZrhwBR7ddww6gVOnyJrfGL8fMkW/ZNeKRhrTZuSP+63oDOeGTsTumD+YKJzfPs
# p5WlwkuPjcqbO+w32FeVOHVhNI4swkN5svz3fkr8NuflfA7kH6nBQ5wymObbaTLc
# Erx03lrtP1+6nw43V11UnYt6iDMg4EBUQwtzNaKFnk3rMIdjoQYxIM5FTBWL2rYD
# Dg6PhkncXQ1WNWhUaFqpTFLB52XAYsSa4/y2QAGP6nWbqAUAUknQ3exaMvWiq7Z0
# nZeyyhIWvpJIHGCArWRdqqh+zsBdsmUVuPGyZnZgL/cXoJboYiHMyMJSUWE0XxML
# NGrncwxdsBXkVGGwTdHpBT64dcu3ENRgwtraqRLQm+tp5MKNTJB/+Ug2/p1vonHT
# UOoHz//UPskn8sHIyevoHXeu2Ns0uIHzrAXr+7Ay+9UYyIH6a07F4b2BGqkfyi/i
# 8wQsDmJ/idx5C4q1+jS+GuIbpnjIx6nxXwXMqpscUXZmM4Am8OMkiKxQAa1wExGF
# paId+HHwyks=
# =yuER
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 30 May 2023 09:29:52 AM PDT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (32 commits)
aio: remove aio_disable_external() API
virtio: do not set is_external=true on host notifiers
virtio-scsi: implement BlockDevOps->drained_begin()
virtio-blk: implement BlockDevOps->drained_begin()
virtio: make it possible to detach host notifier from any thread
block/fuse: do not set is_external=true on FUSE fd
block/export: don't require AioContext lock around blk_exp_ref/unref()
block/export: rewrite vduse-blk drain code
hw/xen: do not set is_external=true on evtchn fds
xen-block: implement BlockDevOps->drained_begin()
block: drain from main loop thread in bdrv_co_yield_to_drain()
block: add blk_in_drain() API
hw/xen: do not use aio_set_fd_handler(is_external=true) in xen_xenstore
block/export: stop using is_external in vhost-user-blk server
block/export: wait for vhost-user-blk requests when draining
util/vhost-user-server: rename refcount to in_flight counter
virtio-scsi: stop using aio_disable_external() during unplug
virtio-scsi: avoid race between unplug and transport event
hw/qdev: introduce qdev_is_realized() helper
block-backend: split blk_do_set_aio_context()
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All callers now pass is_external=false to aio_set_fd_handler() and
aio_set_event_notifier(). The aio_disable_external() API that
temporarily disables fd handlers that were registered is_external=true
is therefore dead code.
Remove aio_disable_external(), aio_enable_external(), and the
is_external arguments to aio_set_fd_handler() and
aio_set_event_notifier().
The entire test-fdmon-epoll test is removed because its sole purpose was
testing aio_disable_external().
Parts of this patch were generated using the following coccinelle
(https://coccinelle.lip6.fr/) semantic patch:
@@
expression ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque;
@@
- aio_set_fd_handler(ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque)
+ aio_set_fd_handler(ctx, fd, io_read, io_write, io_poll, io_poll_ready, opaque)
@@
expression ctx, notifier, is_external, io_read, io_poll, io_poll_ready;
@@
- aio_set_event_notifier(ctx, notifier, is_external, io_read, io_poll, io_poll_ready)
+ aio_set_event_notifier(ctx, notifier, io_read, io_poll, io_poll_ready)
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230516190238.8401-21-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The virtio-scsi Host Bus Adapter provides access to devices on a SCSI
bus. Those SCSI devices typically have a BlockBackend. When the
BlockBackend enters a drained section, the SCSI device must temporarily
stop submitting new I/O requests.
Implement this behavior by temporarily stopping virtio-scsi virtqueue
processing when one of the SCSI devices enters a drained section. The
new scsi_device_drained_begin() API allows scsi-disk to message the
virtio-scsi HBA.
scsi_device_drained_begin() uses a drain counter so that multiple SCSI
devices can have overlapping drained sections. The HBA only sees one
pair of .drained_begin/end() calls.
After this commit, virtio-scsi no longer depends on hw/virtio's
ioeventfd aio_set_event_notifier(is_external=true). This commit is a
step towards removing the aio_disable_external() API.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230516190238.8401-19-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The FUSE export calls blk_exp_ref/unref() without the AioContext lock.
Instead of fixing the FUSE export, adjust blk_exp_ref/unref() so they
work without the AioContext lock. This way it's less error-prone.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-15-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For simplicity, always run BlockDevOps .drained_begin/end/poll()
callbacks in the main loop thread. This makes it easier to implement the
callbacks and avoids extra locks.
Move the function pointer declarations from the I/O Code section to the
Global State section for BlockDevOps, BdrvChildClass, and BlockDriver.
Narrow IO_OR_GS_CODE() to GLOBAL_STATE_CODE() where appropriate.
The test-bdrv-drain test case calls bdrv_drain() from an IOThread. This
is now only allowed from coroutine context, so update the test case to
run in a coroutine.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-11-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BlockBackend quiesce_counter is greater than zero during drained
sections. Add an API to check whether the BlockBackend is in a drained
section.
The next patch will use this API.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-10-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Each vhost-user-blk request runs in a coroutine. When the BlockBackend
enters a drained section we need to enter a quiescent state. Currently
any in-flight requests race with bdrv_drained_begin() because it is
unaware of vhost-user-blk requests.
When blk_co_preadv/pwritev()/etc returns it wakes the
bdrv_drained_begin() thread but vhost-user-blk request processing has
not yet finished. The request coroutine continues executing while the
main loop thread thinks it is in a drained section.
One example where this is unsafe is for blk_set_aio_context() where
bdrv_drained_begin() is called before .aio_context_detached() and
.aio_context_attach(). If request coroutines are still running after
bdrv_drained_begin(), then the AioContext could change underneath them
and they race with new requests processed in the new AioContext. This
could lead to virtqueue corruption, for example.
(This example is theoretical, I came across this while reading the
code and have not tried to reproduce it.)
It's easy to make bdrv_drained_begin() wait for in-flight requests: add
a .drained_poll() callback that checks the VuServer's in-flight counter.
VuServer just needs an API that returns true when there are requests in
flight. The in-flight counter needs to be atomic.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-7-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The VuServer object has a refcount field and ref/unref APIs. The name is
confusing because it's actually an in-flight request counter instead of
a refcount.
Normally a refcount destroys the object upon reaching zero. The VuServer
counter is used to wake up the vhost-user coroutine when there are no
more requests.
Avoid confusing by renaming refcount and ref/unref to in_flight and
inc/dec.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-6-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a helper function to check whether the device is realized without
requiring the Big QEMU Lock. The next patch adds a second caller. The
goal is to avoid spreading DeviceState field accesses throughout the
code.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All of the functions that currently take a BlockDriverState, BdrvChild
or BlockBackend as their first parameter expect the associated
AioContext to be locked when they are called. In the case of
no_co_wrappers, they are called from bottom halves directly in the main
loop, so no other caller can be expected to take the lock for them. This
can result in assertion failures because a lock that isn't taken is
released in nested event loops.
Looking at the first parameter is already done by co_wrappers to decide
where the coroutine should run, so doing the same in no_co_wrappers is
only consistent. Take the lock in the generated bottom halves to fix the
problem.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230525124713.401149-2-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I noticed that in the latest version, the copyright string is still
2022, even though 2023 is halfway through. This patch fixes that and
fixes the documentation along with it.
Signed-off-by: Enze Li <lienze@kylinos.cn>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230525064345.1152801-1-lienze@kylinos.cn
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As everything is in place, we can use a new system property to
advertise which stage is supported and remove bad_ste from STE
stage2 config.
The property added arm-smmuv3.stage can have 3 values:
- "1": Stage-1 only is advertised.
- "2": Stage-2 only is advertised.
If not passed or an unsupported value is passed, it will default to
stage-1.
Advertise VMID16.
Don't try to decode CD, if stage-2 is configured.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20230516203327.2051088-11-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CMD_TLBI_S2_IPA: As S1+S2 is not enabled, for now this can be the
same as CMD_TLBI_NH_VAA.
CMD_TLBI_S12_VMALL: Added new function to invalidate TLB by VMID.
For stage-1 only commands, add a check to throw CERROR_ILL if used
when stage-1 is not supported.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20230516203327.2051088-9-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow TLB to be tagged with VMID.
If stage-1 is only supported, VMID is set to -1 and ignored from STE
and CMD_TLBI_NH* cmds.
Update smmu_iotlb_insert trace event to have vmid.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20230516203327.2051088-8-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Parse stage-2 configuration from STE and populate it in SMMUS2Cfg.
Validity of field values are checked when possible.
Only AA64 tables are supported and Small Translation Tables (STT) are
not supported.
According to SMMUv3 UM(IHI0070E) "5.2 Stream Table Entry": All fields
with an S2 prefix (with the exception of S2VMID) are IGNORED when
stage-2 bypasses translation (Config[1] == 0).
Which means that VMID can be used(for TLB tagging) even if stage-2 is
bypassed, so we parse it unconditionally when S2P exists. Otherwise
it is set to -1.(only S1P)
As stall is not supported, if S2S is set the translation would abort.
For S2R, we reuse the same code used for stage-1 with flag
record_faults. However when nested translation is supported we would
need to separate stage-1 and stage-2 faults.
Fix wrong shift in STE_S2HD, STE_S2HA, STE_S2S.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20230516203327.2051088-6-smostafa@google.com
[PMM: fixed format string]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for adding stage-2 support, rename smmu_ptw_64 to
smmu_ptw_64_s1 and refactor some of the code so it can be reused in
stage-2 page table walk.
Remove AA64 check from PTW as decode_cd already ensures that AA64 is
used, otherwise it faults with C_BAD_CD.
A stage member is added to SMMUPTWEventInfo to differentiate
between stage-1 and stage-2 ptw faults.
Add stage argument to trace_smmu_ptw_level be consistent with other
trace events.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20230516203327.2051088-4-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for adding stage-2 support, add a S2 config
struct(SMMUS2Cfg), composed of the following fields and embedded in
the main SMMUTransCfg:
-tsz: Size of IPA input region (S2T0SZ)
-sl0: Start level of translation (S2SL0)
-affd: AF Fault Disable (S2AFFD)
-record_faults: Record fault events (S2R)
-granule_sz: Granule page shift (based on S2TG)
-vmid: Virtual Machine ID (S2VMID)
-vttb: Address of translation table base (S2TTB)
-eff_ps: Effective PA output range (based on S2PS)
They will be used in the next patches in stage-2 address translation.
The fields in SMMUS2Cfg, are reordered to make the shared and stage-1
fields next to each other, this reordering didn't change the struct
size (104 bytes before and after).
Stage-1 only fields: aa64, asid, tt, ttb, tbi, record_faults, oas.
oas is stage-1 output address size. However, it is used to check
input address in case stage-1 is unimplemented or bypassed according
to SMMUv3 manual IHI0070.E "3.4. Address sizes"
Shared fields: stage, disabled, bypassed, aborted, iotlb_*.
No functional change intended.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20230516203327.2051088-3-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SNVS is supported on both i.MX6 and i.MX6UL and is needed
to support shutdown on the board.
Cc: Peter Maydell <peter.maydell@linaro.org> (odd fixer:SABRELITE / i.MX6)
Cc: Jean-Christophe Dubois <jcd@tribudubois.net> (reviewer:SABRELITE / i.MX6)
Cc: qemu-arm@nongnu.org (open list:SABRELITE / i.MX6)
Cc: qemu-devel@nongnu.org (open list:All patches CC here)
Signed-off-by: Vitaly Cheptsov <cheptsov@ispras.ru>
Message-id: 20230515095015.66860-1-cheptsov@ispras.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This queue includes several assorted fixes for PowerPC SPR
emulation, a change in the default Pegasos2 CPU, the addition
of AIL mode 3 for spapr, a PIC->CPU interrupt fix for prep and
performance enhancements in fpu_helper.c.
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZHOFiRYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFkVZ0BAMV+9RlHKRlldOSPMEWCWo6hmA/U
9SMyJsZPY3OpDbE3AP9XOQR1boqyT5MJXoeOUq1OLlFm6mY7UA300kBZ7wxVCw==
=IGNT
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20230528' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2023-05-28:
This queue includes several assorted fixes for PowerPC SPR
emulation, a change in the default Pegasos2 CPU, the addition
of AIL mode 3 for spapr, a PIC->CPU interrupt fix for prep and
performance enhancements in fpu_helper.c.
# -----BEGIN PGP SIGNATURE-----
#
# iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZHOFiRYcZGFuaWVsaGI0
# MTNAZ21haWwuY29tAAoJEDzZypbeAzFkVZ0BAMV+9RlHKRlldOSPMEWCWo6hmA/U
# 9SMyJsZPY3OpDbE3AP9XOQR1boqyT5MJXoeOUq1OLlFm6mY7UA300kBZ7wxVCw==
# =IGNT
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 28 May 2023 09:47:05 AM PDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20230528' of https://gitlab.com/danielhb/qemu:
ppc/pegasos2: Change default CPU to 7457
target/ppc: Add POWER9 DD2.2 model
target/ppc: Merge COMPUTE_CLASS and COMPUTE_FPRF
pnv_lpc: disable reentrancy detection for lpc-hc
target/ppc: Use SMT4 small core chip type in POWER9/10 PVRs
hw/ppc/prep: Fix wiring of PIC -> CPU interrupt
spapr: Add SPAPR_CAP_AIL_MODE_3 for AIL mode 3 support for H_SET_MODE hcall
target/ppc: Alignment faults do not set DSISR in ISA v3.0 onward
target/ppc: Fix width of some 32-bit SPRs
target/ppc: Fix fallback to MFSS for MFFS* instructions on pre 3.0 ISAs
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
POWER9 DD2.1 and earlier had significant limitations when running KVM,
including lack of "mixed mode" MMU support (ability to run HPT and RPT
mode on threads of the same core), and a translation prefetch issue
which is worked around by disabling "AIL" mode for the guest.
These processors are not widely available, and it's difficult to deal
with all these quirks in qemu +/- KVM, so create a POWER9 DD2.2 CPU
and make it the default POWER9 CPU.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20230515160201.394587-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The behaviour of the Address Translation Mode on Interrupt resource is
not consistently supported by all CPU versions or all KVM versions: KVM
HV does not support mode 2, and does not support mode 3 on POWER7 or
early POWER9 processesors. KVM PR only supports mode 0. TCG supports all
modes (0, 2, 3) on CPUs with support for the corresonding LPCR[AIL] mode.
This leads to inconsistencies in guest behaviour and could cause problems
migrating guests.
This was not noticable for Linux guests for a long time because the
kernel only uses modes 0 and 3, and it used to consider AIL-3 to be
advisory in that it would always keep the AIL-0 vectors around, so it
did not matter whether or not interrupts were delivered according to
the AIL mode. Recent Linux guests depend on AIL mode 3 working as
specified in order to support the SCV facility interrupt. If AIL-3 can
not be provided, then H_SET_MODE must return an error to Linux so it can
disable the SCV facility (failure to do so can lead to userspace being
able to crash the guest kernel).
Add the ail-mode-3 capability to specify that AIL-3 is supported. AIL-0
is implied as the baseline, and AIL-2 is no longer supported by spapr.
AIL-2 is not known to be used by any software, but support in TCG could
be restored with an ail-mode-2 capability quite easily if a regression
is reported.
Modify the H_SET_MODE Address Translation Mode on Interrupt resource
handler to check capabilities and correctly return error if not
supported.
KVM has a cap to advertise support for AIL-3.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230515160216.394612-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add helpers for generating Multi-touch events from the UI backends that
can be sent to the guest through a virtio-multitouch device.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230526112925.38794-6-slp@redhat.com>
Add a virtio-multitouch device to the family of devices emulated by
virtio-input implementing the Multi-touch protocol as descripted here:
https://www.kernel.org/doc/html/latest/input/multi-touch-protocol.html?highlight=multi+touch
This patch just add the device itself, without connecting it to any
backends. The following patches will add a PCI-based multitouch device,
some helpers in "ui" and will enable the GTK3 backend to transpose
multi-touch events from the host to the guest.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230526112925.38794-4-slp@redhat.com>
Although not actually exploitable at the moment, a negative width/height
could make datasize wrap around and potentially lead to buffer overflow.
Since there is no reason a negative width/height is ever appropriate,
modify QEMUCursor struct and cursor_alloc prototype to accept uint16_t.
This protects us against accidentally introducing future bugs.
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reported-by: Jacek Halon <jacek.halon@gmail.com>
Reported-by: Yair Mizrahi <yairh33@gmail.com>
Reported-by: Elsayed El-Refa'ei <e.elrefaei99@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230523163023.608121-1-mcascell@redhat.com>
Since commit abe34282 ("win32: avoid mixing SOCKET and file descriptor
space"), we set HANDLE_FLAG_PROTECT_FROM_CLOSE on the socket FD, to
prevent closing the HANDLE with CloseHandle. This raises an exception
which under gdb is fatal, and qemu exits.
Let's catch the expected error instead.
Note: this appears to work, but the mingw64 macro is not well documented
or tested, and it's not obvious how it is meant to be used.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230515132440.1025315-1-marcandre.lureau@redhat.com>
* purge qatomic_mb_read/set from monitor
* build system fixes
* OHCI fix from gitlab
* provide EPYC-Rome CPU model not susceptible to XSAVES erratum
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRvGpEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOa/Af/WS5/tmIlEYgH7UOPERQXNqf7+Jwj
bA2wgqv3ZoQwcgp5f4EVjfA8ABfpGxLZy6xIdUSbWANb8lDJNuh/nPd/em3rWUAU
LnJGGdo1vF31gfsVQnlzb7hJi3ur+e2f8JqkRVskDCk3a7YY44OCN42JdKWLrN9u
CFf2zYqxMqXHjrYrY0Kx2oTkfGDZrfwUlx0vM4dHb8IEoxaplfDd8lJXQzjO4htr
3nPBPjQ+h08EeC7mObH4XoJE0omzovR10GkBo8K4q952xGOQ041Y/2YY7JwLfx0D
na7IanVo+ZAmvTJZoJFSBwNnXkTMHvDH5+Hc45NSTsDBtz0YJhRxPw/z/A==
=A5Lp
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* hot-unplug fixes for ioport
* purge qatomic_mb_read/set from monitor
* build system fixes
* OHCI fix from gitlab
* provide EPYC-Rome CPU model not susceptible to XSAVES erratum
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRvGpEUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOa/Af/WS5/tmIlEYgH7UOPERQXNqf7+Jwj
# bA2wgqv3ZoQwcgp5f4EVjfA8ABfpGxLZy6xIdUSbWANb8lDJNuh/nPd/em3rWUAU
# LnJGGdo1vF31gfsVQnlzb7hJi3ur+e2f8JqkRVskDCk3a7YY44OCN42JdKWLrN9u
# CFf2zYqxMqXHjrYrY0Kx2oTkfGDZrfwUlx0vM4dHb8IEoxaplfDd8lJXQzjO4htr
# 3nPBPjQ+h08EeC7mObH4XoJE0omzovR10GkBo8K4q952xGOQ041Y/2YY7JwLfx0D
# na7IanVo+ZAmvTJZoJFSBwNnXkTMHvDH5+Hc45NSTsDBtz0YJhRxPw/z/A==
# =A5Lp
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 May 2023 01:21:37 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
monitor: do not use mb_read/mb_set
monitor: extract request dequeuing to a new function
monitor: introduce qmp_dispatcher_co_wake
monitor: cleanup fetching of QMP requests
monitor: cleanup detection of qmp_dispatcher_co shutting down
monitor: do not use mb_read/mb_set for suspend_cnt
monitor: add more *_locked() functions
monitor: allow calling monitor_resume under mon_lock
monitor: use QEMU_LOCK_GUARD a bit more
softmmu/ioport.c: make MemoryRegionPortioList owner of portio_list MemoryRegions
softmmu/ioport.c: QOMify MemoryRegionPortioList
softmmu/ioport.c: allocate MemoryRegionPortioList ports on the heap
usb/ohci: Set pad to 0 after frame update
meson: move -no-pie from linker to compiler
meson: fix rule for qemu-ga installer
meson.build: Fix glib -Wno-unused-function workaround
target/i386: EPYC-Rome model without XSAVES
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow flushing and printing to the monitor while mon->mon_lock is
held. This will help cleaning up the locking of mon->mux_out and
mon->suspend_cnt.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This had been set since the beginning, is never undefined,
and it would seem to be harmful to debugging to do so.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Atomic load/store of 128-byte quantities is now handled
by cpu_{ld,st}16_mmu.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of functions.
The only use of the functions with explicit endianness was in
target/sparc64, and that was only to satisfy the assert: the
correct endianness is already built into memop.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Not only the routines in ldst_atomicity.c.inc need markup,
but also the ones in the headers.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Separates the aarch64-specific portion into its own file.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Separates the aarch64-specific portion into its own file.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add an option for hostmem-file to start the memory object at an offset
into the target file. This is useful if multiple memory objects reside
inside the same target file, such as a device node.
In particular, it's useful to map guest memory directly into /dev/mem
for experimentation.
To make this work consistently, also fix up all places in QEMU that
expect fd offsets to be 0.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20230403221421.60877-1-graf@amazon.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
It is possible to have another VLAN tag even if the packet is already
tagged.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The uses of uint8_t pointers were misleading as they are never accessed
as an array of octets and it even require more strict alignment to
access as struct eth_header.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Section 13.7.15 Receive Length Error Count says:
> Packets over 1522 bytes are oversized if LongPacketEnable is 0b
> (RCTL.LPE). If LongPacketEnable (LPE) is 1b, then an incoming packet
> is considered oversized if it exceeds 16384 bytes.
> These lengths are based on bytes in the received packet from
> <Destination Address> through <CRC>, inclusively.
As QEMU processes packets without CRC, the number of bytes for CRC
need to be subtracted. This change adds some size definitions to be used
to derive the new size thresholds to eth.h.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The old eth_setup_vlan_headers has no user so remove it and rename
eth_setup_vlan_headers_ex.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
igb does not properly ensure the buffer passed to
net_rx_pkt_set_protocols() is contiguous for the entire L2/L3/L4 header.
Allow it to pass scattered data to net_rx_pkt_set_protocols().
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
* Enable the "bios bits" avocado test in the gitlab-CI
* Another minor fix for the redundancy DMA blocker code
-----BEGIN PGP SIGNATURE-----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=m1Px
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-05-22' of https://gitlab.com/thuth/qemu into staging
* First batch of fixes to allow "make check" with "--without-default-devices"
* Enable the "bios bits" avocado test in the gitlab-CI
* Another minor fix for the redundancy DMA blocker code
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmRrVhoRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbUaiRAApPVveet6WPQ7Ag1448LtqHTGiwl8x2Ba
# jQ7FTKhqdTC5O+/BU7IQkvGmErPxCc8WPB7eoowwBVA/4dr8YIIBLKqO4RtP6LXs
# rtUkzsPI9ExW+iJjIMVOmHsp/shlRhuf+Tmlr8OsTObecCeA4Vbxc+RlvYXfCPhM
# 8tOuLO8n6LQY/62fgXSzI5WlLQSzIo3aDSmCeWa1QHkPLf6itvGkwsNBytMJLoUT
# pXZnBNqlXiuyPtloLp+DMfRRkpq8AHB04+Sri7TVPxi7bJL28RMZiaAXpvHSFLz8
# JR2ApRrzBthiLMK1I6A0c2ZGCbVOAi1dhNDNqWCyx8ZBASEJj0XuT/+Qse81sKmG
# zNXr57x0CzWAJ59/taBM2hjUks10rJOmxHJYxS6i1JJR7u1zTuvii7toPMmf35zX
# bM7TYjKpYGa2HneHpw1eOjpTgUYZpgla/pVXZhKqoGdfmseBMlFU424MNl/xDRng
# bxuam3Ku+ClOeQlzXt8aceL/gTApJfvy5FAIAK5yUOQDTs6HjJJL2AfcOzss8kXb
# k6IMHgV1tnLed8B7K4iml2rzvk+RT3CPGvmaNwSAkdh8SnE5/bv1I6s4fHiXMlvC
# mmfvFSoWwdhcsD5r+XOFxfke8sGrOeQIXKefp6UL3hYVV7o2NUe89BytXZCzut/Y
# 6ulR25HHtmI=
# =m1Px
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 22 May 2023 04:46:34 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-05-22' of https://gitlab.com/thuth/qemu:
memory: stricter checks prior to unsetting engaged_in_io
acpi/tests/avocado/bits: enable bios bits avocado tests on gitlab CI pipeline
.gitlab-ci.d/buildtest.yml: Run full "make check" with --without-default-devices
tests/qemu-iotests/172: Run QEMU with -vga none and -nic none
tests/qtest/meson.build: Run the net filter tests only with default devices
tests/qtest: Check for the availability of virtio-ccw devices before using them
tests/qtest/virtio-ccw-test: Remove superfluous tests
tests/qtest/cdrom-test: Fix the test to also work without optional devices
tests/qtest/usb-hcd-uhci-test: Skip test if UHCI controller is not available
tests/qtest/readconfig-test: Check for the availability of USB controllers
hw/sparc64/sun4u: Use MachineClass->default_nic and MachineClass->no_parallel
hw/i386: Ignore the default parallel port if it has not been compiled into QEMU
hw/char/parallel: Move TYPE_ISA_PARALLEL to the header file
hw/sh4: Use MachineClass->default_nic in the sh4 r2d machine
hw/s390x: Use MachineClass->default_nic in the s390x machine
hw/ppc: Use MachineClass->default_nic in the ppc machines
softmmu/vl.c: Disable default NIC if it has not been compiled into the binary
hw: Move the default NIC machine class setting from the x86 to the generic one
softmmu/vl.c: Check for the availability of the VGA device before using it
hw/i386/Kconfig: ISAPC works fine without VGA_ISA
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- qcow2 spec: Rename "zlib" compression to "deflate"
- Honour graph read lock even in the main thread + prerequisite fixes
- aio-posix: do not nest poll handlers (fixes infinite recursion)
- Refactor QMP blockdev transactions
- graph-lock: Disable locking for now
- iotests/245: Check if 'compress' driver is available
-----BEGIN PGP SIGNATURE-----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=edNP
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- qcow2 spec: Rename "zlib" compression to "deflate"
- Honour graph read lock even in the main thread + prerequisite fixes
- aio-posix: do not nest poll handlers (fixes infinite recursion)
- Refactor QMP blockdev transactions
- graph-lock: Disable locking for now
- iotests/245: Check if 'compress' driver is available
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmRnrxURHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9aHyw/9H0xpceVb0kcC5CStOWCcq4PJHzkl/8/m
# c6ABFe0fgEuN2FCiKiCKOt6+V7qaIAw0+YLgPr/LGIsbIBzdxF3Xgd2UyIH6o4dK
# bSaIAaes6ZLTcYGIYEVJtHuwNgvzhjyBlW5qqwTpN0YArKS411eHyQ3wlUkCEVwK
# ZNmDY/MC8jq8r1xfwpPi7CaH6k1I6HhDmyl1PdURW9hmoAKZQZMhEdA5reJrUwZ9
# EhfgbLIaK0kkLLsufJ9YIkd+b/P3mUbH30kekNMOiA0XlnhWm1Djol5pxlnNiflg
# CGh6CAyhJKdXzwV567cSF11NYCsFmiY+c/l0xRIGscujwvO4iD7wFT5xk2geUAKV
# yaox8JA7Le36g7lO2CRadlS24/Ekqnle6q09g2i8s2tZwB4fS286vaZz6QDPmf7W
# VSQp9vuDj6ZcVjMsuo2+LzF3yA2Vqvgd9s032iBAjRDSGLAoOdQZjBJrreypJ0Oi
# pVFwgK+9QNCZBsqVhwVOgElSoK/3Vbl1kqpi30Ikgc0epAn0suM1g2QQPJ2Zt/MJ
# xqMlTv+48OW3vq3ebr8GXqkhvG/u0ku6I1G6ZyCrjOce89osK8QUaovERyi1eOmo
# ouoZ8UJJa6VfEkkmdhq2vF6u/MP4PeZ8MW3pYQy6qEnSOPDKpLnR30Z/s/HZCZcm
# H4QIbfQnzic=
# =edNP
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 19 May 2023 10:17:09 AM PDT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (21 commits)
iotests: Test commit with iothreads and ongoing I/O
nbd/server: Fix drained_poll to wake coroutine in right AioContext
graph-lock: Disable locking for now
tested: add test for nested aio_poll() in poll handlers
aio-posix: do not nest poll handlers
iotests/245: Check if 'compress' driver is available
graph-lock: Honour read locks even in the main thread
blockjob: Adhere to rate limit even when reentered early
test-bdrv-drain: Call bdrv_co_unref() in coroutine context
test-bdrv-drain: Take graph lock more selectively
qemu-img: Take graph lock more selectively
qcow2: Unlock the graph in qcow2_do_open() where necessary
block/export: Fix null pointer dereference in error path
block: Call .bdrv_co_create(_opts) unlocked
docs/interop/qcow2.txt: fix description about "zlib" clusters
blockdev: qmp_transaction: drop extra generic layer
blockdev: use state.bitmap in block-dirty-bitmap-add action
blockdev: transaction: refactor handling transaction properties
blockdev: qmp_transaction: refactor loop to classic for
blockdev: transactions: rename some things
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We are going to require the macro from other files, too, so move
this #define to the header file.
Message-Id: <20230512124033.502654-9-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are going to re-use this setting for other targets, so let's
move this to the main MachineClass.
Message-Id: <20230512124033.502654-4-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
CXL volatile memory support
More memslots for vhost-user on x86 and ARM.
vIOMMU support for vhost-vdpa
pcie-to-pci bridge can now be compiled out
MADT revision bumped to 3
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRniWoPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpN4MH/RqdvHmujrjvjzXbbN/gq87Njp+kQLKEooIE
ZkqdNaVUE6vjCH8iU+chjsxt4VSquSjOL9CWWrYefEIeqCFLWsuXSAY0VDAbY67x
+aes51tTYILVsx7fbb+T5mJKRgVuWW4C5KaGeQ1djSexy42nvplZUJdIJUhZr0t9
dzzOsD+mezHS7Xu2QOzSfl5QQRuOVVJnjJXkqJG/yRvHrZM5aTolatr/X7jNGedm
4oyMsVMaAcQ+dnEQigRJodf/MpFfs9DfNZAH55VwwQWsNT0t0ueD0xigR203jjaE
mJJJipAqetFax2JjC7QMXWf+LR36BnL/0/xH+x/BWb0FI42wr0I=
=ajmR
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes, features, cleanups
CXL volatile memory support
More memslots for vhost-user on x86 and ARM.
vIOMMU support for vhost-vdpa
pcie-to-pci bridge can now be compiled out
MADT revision bumped to 3
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRniWoPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpN4MH/RqdvHmujrjvjzXbbN/gq87Njp+kQLKEooIE
# ZkqdNaVUE6vjCH8iU+chjsxt4VSquSjOL9CWWrYefEIeqCFLWsuXSAY0VDAbY67x
# +aes51tTYILVsx7fbb+T5mJKRgVuWW4C5KaGeQ1djSexy42nvplZUJdIJUhZr0t9
# dzzOsD+mezHS7Xu2QOzSfl5QQRuOVVJnjJXkqJG/yRvHrZM5aTolatr/X7jNGedm
# 4oyMsVMaAcQ+dnEQigRJodf/MpFfs9DfNZAH55VwwQWsNT0t0ueD0xigR203jjaE
# mJJJipAqetFax2JjC7QMXWf+LR36BnL/0/xH+x/BWb0FI42wr0I=
# =ajmR
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 19 May 2023 07:36:26 AM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (40 commits)
hw/i386/pc: No need for rtc_state to be an out-parameter
hw/i386/pc: Create RTC controllers in south bridges
hw/cxl: Introduce cxl_device_get_timestamp() utility function
hw/cxl: rename mailbox return code type from ret_code to CXLRetCode
hw/pci-bridge: make building pcie-to-pci bridge configurable
virtio-pci: add handling of PCI ATS and Device-TLB enable/disable
hw/pci-host/pam: Make init_pam() usage more readable
hw/i386/pc: Initialize ram_memory variable directly
hw/i386/pc_{q35,piix}: Minimize usage of get_system_memory()
hw/i386/pc_{q35,piix}: Reuse MachineClass::desc as SMB product name
hw/i386/pc_q35: Reuse machine parameter
hw/pci-host/q35: Inline sysbus_add_io()
hw/pci-host/i440fx: Inline sysbus_add_io()
vhost-vdpa: Add support for vIOMMU.
vhost-vdpa: Add check for full 64-bit in region delete
vhost_vdpa: fix the input in trace_vhost_vdpa_listener_region_del()
vhost: expose function vhost_dev_has_iommu()
virtio-crypto: fix NULL pointer dereference in virtio_crypto_free_request
virtio-net: not enable vq reset feature unconditionally
vhost-user: Remove acpi-specific memslot limit
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
nbd_drained_poll() generally runs in the main thread, not whatever
iothread the NBD server coroutine is meant to run in, so it can't
directly reenter the coroutines to wake them up.
The code seems to have the right intention, it specifies the correct
AioContext when it calls qemu_aio_coroutine_enter(). However, this
functions doesn't schedule the coroutine to run in that AioContext, but
it assumes it is already called in the home thread of the AioContext.
To fix this, add a new thread-safe qio_channel_wake_read() that can be
called in the main thread to wake up the coroutine in its AioContext,
and use this in nbd_drained_poll().
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230517152834.277483-3-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When jobs are sleeping, for example to enforce a given rate limit, they
can be reentered early, in particular in order to get paused, to update
the rate limit or to get cancelled.
Before this patch, they behave in this case as if they had fully
completed their rate limiting delay. This means that requests are sped
up beyond their limit, violating the constraints that the user gave us.
Change the block jobs to sleep in a loop until the necessary delay is
completed, while still allowing cancelling them immediately as well
pausing (handled by the pause point in job_sleep_ns()) and updating the
rate limit.
This change is also motivated by iotests cases being prone to fail
because drain operations pause and unpause them so often that block jobs
complete earlier than they are supposed to. In particular, the next
commit would fail iotests 030 without this change.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-8-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are functions that modify the graph, so they must be able to take
a writer lock. This is impossible if they already hold the reader lock.
If they need a reader lock for some of their operations, they should
take it internally.
Many of them go through blk_*(), which will always take the lock itself.
Direct calls of bdrv_*() need to take the reader lock. Note that while
locking for bdrv_co_*() calls is checked by TSA, this is not the case
for the mixed_coroutine_fns bdrv_*(). Holding the lock is still required
when they are called from coroutine context like here!
This effectively reverts 4ec8df0183, but adds some internal locking
instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that the RTC is created as part of the southbridges it doesn't need
to be an out-parameter any longer.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230519084734.220480-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Just like in the real hardware (and in PIIX4), create the RTC
controllers in the south bridges.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230519084734.220480-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are new users of this functionality coming shortly so factor
it out from the GET_TIMESTAMP mailbox command handling.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230423162013.4535-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to PCIe Address Translation Services specification 5.1.3.,
ATS Control Register has Enable bit to enable/disable ATS. Guest may
enable/disable PCI ATS and, accordingly, Device-TLB for the VirtIO PCI
device. So, raise/lower a flag and call a trigger function to pass this
event to a device implementation.
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Message-Id: <20230512135122.70403-2-viktor@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Unlike pam_update() which takes the subject -- PAMMemoryRegion -- as
first argument, init_pam() takes it as fifth (!) argument. This makes it
quite hard to figure out what an init_pam() invocation actually
initializes. By moving the subject to the front this should become
clearer.
While at it, lower the DeviceState parameter to Object, also
communicating more clearly that this parameter is just the owner rather
than some (heavy?) dependency.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213162004.2797-8-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Going through pc_memory_init() seems quite complicated for a simple
assignment.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213162004.2797-7-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
1. The vIOMMU support will make vDPA can work in IOMMU mode. This
will fix security issues while using the no-IOMMU mode.
To support this feature we need to add new functions for IOMMU MR adds and
deletes.
Also since the SVQ does not support vIOMMU yet, add the check for IOMMU
in vhost_vdpa_dev_start, if the SVQ and IOMMU enable at the same time
the function will return fail.
2. Skip the iova_max check vhost_vdpa_listener_skipped_section(). While
MR is IOMMU, move this check to vhost_vdpa_iommu_map_notify()
Verified in vp_vdpa and vdpa_sim_net driver
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230510054631.2951812-5-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To support vIOMMU in vdpa, need to exposed the function
vhost_dev_has_iommu, vdpa will use this function to check
if vIOMMU enable.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230510054631.2951812-2-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since it's implementation on v8.0.0-rc0, having the PCI_ERR_UNCOR_MASK
set for machine types < 8.0 will cause migration to fail if the target
QEMU version is < 8.0.0 :
qemu-system-x86_64: get_pci_config_device: Bad config data: i=0x10a read: 40 device: 0 cmask: ff wmask: 0 w1cmask:0
qemu-system-x86_64: Failed to load PCIDevice:config
qemu-system-x86_64: Failed to load e1000e:parent_obj
qemu-system-x86_64: error while loading state for instance 0x0 of device '0000:00:02.0/e1000e'
qemu-system-x86_64: load of migration failed: Invalid argument
The above test migrated a 7.2 machine type from QEMU master to QEMU 7.2.0,
with this cmdline:
./qemu-system-x86_64 -M pc-q35-7.2 [-incoming XXX]
In order to fix this, property x-pcie-err-unc-mask was introduced to
control when PCI_ERR_UNCOR_MASK is enabled. This property is enabled by
default, but is disabled if machine type <= 7.2.
Fixes: 010746ae1d ("hw/pci/aer: Implement PCI_ERR_UNCOR_MASK register")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Message-Id: <20230503002701.854329-1-leobras@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1576
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit enables each CXL Type-3 device to contain one volatile
memory region and one persistent region.
Two new properties have been added to cxl-type3 device initialization:
[volatile-memdev] and [persistent-memdev]
The existing [memdev] property has been deprecated and will default the
memory region to a persistent memory region (although a user may assign
the region to a ram or file backed region). It cannot be used in
combination with the new [persistent-memdev] property.
Partitioning volatile memory from persistent memory is not yet supported.
Volatile memory is mapped at DPA(0x0), while Persistent memory is mapped
at DPA(vmem->size), per CXL Spec 8.2.9.8.2.0 - Get Partition Info.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421160827.2227-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Hi
Based on latest reviewed parts of migration:
- Disable colo (vladimir)
- Migration atomic counters (juan)
Please apply.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmRmXJUACgkQ9IfvGFhy
1yNRAxAAjDYJELL34Qovt/WE9qKhYJEvIUGTl1IMWJ22YMFnqIFKRdka57dWoU3P
7EK1BHmokEEtzGT7Fe1ecERXsOwQIJDIkDTJ5g8Oc8Jt1iqY1AC8h5T+LghijCar
mbZ6qWHaSjsg2lmek/xc9quymzFGGK36PSyB5WkaLRviKQn4RIkEDpUaWny7nDbA
Q8zJJpBqNFqKfC5/DN0ePa3QQscXQJhey3nxqFd8hYp8RFNIV5UJVW5Lf6ombtK7
atgdWC4ckkfO2z3OsghKeo/UiMFWpPktgBVVMhDLmk+P/E6czc2gfzD6SCvrPKTj
XowI8hro22HVmq9bEY8PtbjMOfpxrAxer+tM2KR/0O9l3UzUacFsi7KGqCJ1/trQ
1tSDjlgyczb8GOgLwwxj8XE+jPHPfVrzCNfDqrBKBNxz6nnZSdZUwhV5mG8FdVtm
oVVV96BIrNXLl/lIxYIFD/Zyvl8/lrSWQdLkEHTzihYQeXaQfyvPVbV/dOLT4sii
YUuGCuEhF+DW/qz43G1krwq5/bfxsiZoQzrMV/Odtf0wYQKkabA3KNBIda/vxBCR
dsLQ7QtmOwKmCzjqw4LUov9vDNYOYr98o7ZqwJ3qeKL4QgFwtEZUFO3VW6UR8fnF
arVXiTn9wVlkTpu4sT5hLm9400iadhX4Fppji7Ce0tUpLbWbghA=
=3x32
-----END PGP SIGNATURE-----
Merge tag 'migration-20230518-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request
Hi
Based on latest reviewed parts of migration:
- Disable colo (vladimir)
- Migration atomic counters (juan)
Please apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmRmXJUACgkQ9IfvGFhy
# 1yNRAxAAjDYJELL34Qovt/WE9qKhYJEvIUGTl1IMWJ22YMFnqIFKRdka57dWoU3P
# 7EK1BHmokEEtzGT7Fe1ecERXsOwQIJDIkDTJ5g8Oc8Jt1iqY1AC8h5T+LghijCar
# mbZ6qWHaSjsg2lmek/xc9quymzFGGK36PSyB5WkaLRviKQn4RIkEDpUaWny7nDbA
# Q8zJJpBqNFqKfC5/DN0ePa3QQscXQJhey3nxqFd8hYp8RFNIV5UJVW5Lf6ombtK7
# atgdWC4ckkfO2z3OsghKeo/UiMFWpPktgBVVMhDLmk+P/E6czc2gfzD6SCvrPKTj
# XowI8hro22HVmq9bEY8PtbjMOfpxrAxer+tM2KR/0O9l3UzUacFsi7KGqCJ1/trQ
# 1tSDjlgyczb8GOgLwwxj8XE+jPHPfVrzCNfDqrBKBNxz6nnZSdZUwhV5mG8FdVtm
# oVVV96BIrNXLl/lIxYIFD/Zyvl8/lrSWQdLkEHTzihYQeXaQfyvPVbV/dOLT4sii
# YUuGCuEhF+DW/qz43G1krwq5/bfxsiZoQzrMV/Odtf0wYQKkabA3KNBIda/vxBCR
# dsLQ7QtmOwKmCzjqw4LUov9vDNYOYr98o7ZqwJ3qeKL4QgFwtEZUFO3VW6UR8fnF
# arVXiTn9wVlkTpu4sT5hLm9400iadhX4Fppji7Ce0tUpLbWbghA=
# =3x32
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 May 2023 10:12:53 AM PDT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [undefined]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20230518-pull-request' of https://gitlab.com/juan.quintela/qemu:
migration: Fix duplicated included in meson.build
migration/multifd: Compute transferred bytes correctly
migration: We don't need the field rate_limit_used anymore
migration: Use migration_transferred_bytes() to calculate rate_limit
migration: Add a trace for migration_transferred_bytes
migration: Move migration_total_bytes() to migration-stats.c
migration: Move rate_limit_max and rate_limit_used to migration_stats
qemu-file: Account for rate_limit usage on qemu_fflush()
migration: Don't use INT64_MAX for unlimited rate
migration: process_incoming_migration_co(): move colo part to colo
migration: split migration_incoming_co
configure: add --disable-colo-proxy option
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These way we can make them atomic and use this functions from any
place. I also moved all functions that use rate_limit to
migration-stats.
Functions got renamed, they are not qemu_file anymore.
qemu_file_rate_limit -> migration_rate_exceeded
qemu_file_set_rate_limit -> migration_rate_set
qemu_file_get_rate_limit -> migration_rate_get
qemu_file_reset_rate_limit -> migration_rate_reset
qemu_file_acct_rate_limit -> migration_rate_account.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let's make better public interface for COLO: instead of
colo_process_incoming_thread and not trivial logic around creating the
thread let's make simple colo_incoming_co(), hiding implementation from
generic code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515130640.46035-4-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In the last stage of live migration or memory slot removal, the
backup bitmap needs to be synchronized when it has been enabled.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20230509022122.20888-3-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The global dirty log synchronization is used when KVM and dirty ring
are enabled. There is a particularity for ARM64 where the backup
bitmap is used to track dirty pages in non-running-vcpu situations.
It means the dirty ring works with the combination of ring buffer
and backup bitmap. The dirty bits in the backup bitmap needs to
collected in the last stage of live migration.
In order to identify the last stage of live migration and pass it
down, an extra parameter is added to the relevant functions and
callbacks. This last stage indicator isn't used until the dirty
ring is enabled in the subsequent patches.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20230509022122.20888-2-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCG will need this declaration, without all of the other
bits that come with cpu-all.h.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect guest tlb parameters from TCG compilation.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect guest page size from TCG compilation.
While this could be done via exec/target_page.h, we want to cache
the value across multiple memory access operations, so we might
as well initialize this early.
The changes within tcg/ are entirely mechanical:
sed -i s/TARGET_PAGE_BITS/s->page_bits/g
sed -i s/TARGET_PAGE_MASK/s->page_mask/g
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For 32-bit hosts, we cannot simply rely on TCGContext.addr_bits,
as we need one or two host registers to represent the guest address.
Create the new opcodes and update all users. Since we have not
yet eliminated TARGET_LONG_BITS, only one of the two opcodes will
ever be used, so we can get away with treating them the same in
the backends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expand from TCGv to TCGTemp inline in the translators,
and validate that the size matches tcg_ctx->addr_type.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expand from TCGv to TCGTemp inline in the translators,
and validate that the size matches tcg_ctx->addr_type.
These inlines will eventually be seen only by target-specific code.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will enable replacement of TARGET_LONG_BITS within tcg/.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we do this inside gen_empty_mem_cb anyway, let's
do this earlier inside tcg expansion.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always pass the target address as uint64_t.
Adjust tcg_out_{ld,st}_helper_args to match.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already pass uint64_t to restore_state_to_opc; this changes all
of the other uses from insn_start through the encoding to decoding.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add opcodes for backend support for 128-bit memory operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Notice when Intel or AMD have guaranteed that vmovdqa is atomic.
The new variable will also be used in generated code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TCG backends may need to defer to a helper to implement
the atomicity required by a given operation. Mirror the
interface used in system mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of functions.
Hoist the qemu_{ld,st}_helpers arrays to tcg.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This field may be used to describe the precise atomicity requirements
of the guest, which may then be used to constrain the methods by which
it may be emulated by the host.
For instance, the AArch64 LDP (32-bit) instruction changes semantics
with ARMv8.4 LSE2, from
MO_64 | MO_ATOM_IFALIGN_PAIR
(64-bits, single-copy atomic only on 4 byte units,
nonatomic if not aligned by 4),
to
MO_64 | MO_ATOM_WITHIN16
(64-bits, single-copy atomic within a 16 byte block)
The former may be implemented with two 4 byte loads, or a single 8 byte
load if that happens to be efficient on the host. The latter may not
be implemented with two 4 byte loads and may also require a helper when
misaligned.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In some spots, it would be helpful to be able to use TARGET_NAME
in common (target independent) code, too. Thus introduce a wrapper
that can be called from common code, too, just like we already
have one for target_words_bigendian().
Message-Id: <20230424160434.331175-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For being able to create a universal QEMU binary one day, core
files like machine-qmp-cmds.c must not contain any "#ifdef TARGET_..."
parts. Thus let's provide the target specific function via a
function pointer in CPUClass instead, as a first step towards
making this file target independent.
Message-Id: <20230424160434.331175-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Kernel commit 292a7d6fca33 ("KVM: s390: pv: fix asynchronous teardown
for small VMs") causes the KVM_PV_ASYNC_CLEANUP_PREPARE ioctl to fail
if the VM is not larger than 2GiB. QEMU would attempt it and fail,
print an error message, and then proceed with a normal teardown.
Avoid attempting to use asynchronous teardown altogether when the VM is
not larger than 2 GiB. This will avoid triggering the error message and
also avoid pointless overhead; normal teardown is fast enough for small
VMs.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Fixes: c3a073c610 ("s390x/pv: Add support for asynchronous teardown for reboot")
Link: https://lore.kernel.org/all/20230421085036.52511-2-imbrenda@linux.ibm.com/
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20230510105531.30623-2-imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Fix inline function parameter in pv.h]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The lifetime of the PCIBridgeWindows instance accessed via the windows pointer
in struct PCIBridge is managed separately from the PCIBridge itself.
Triggered by ./qemu-system-x86_64 -M x-remote -display none -monitor stdio
QEMU monitor: device_add cxl-downstream
In some error handling paths (such as the above due to attaching a cxl-downstream
port anything other than a cxl-upstream port) the g_free() of the PCIBridge
windows in pci_bridge_region_cleanup() is called before the final call of
flatview_uref() in address_space_set_flatview() ultimately from
drain_call_rcu()
At one stage this resulted in a crash, currently can still be observed using
valgrind which records a use after free.
When present, only one instance is allocated. pci_bridge_update_mappings()
can operate directly on an instance rather than creating a new one and
swapping it in. Thus there appears to be no reason to not directly
couple the lifetimes of the two structures by embedding the PCIBridgeWindows
within the PCIBridge removing the need for the problematic separate free.
Patch is same as was posted deep in the discussion.
https://lore.kernel.org/qemu-devel/20230403171232.000020bb@huawei.com/
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421122550.28234-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
All types used are forward-declared in "qemu/typedefs.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230405160454.97436-2-philmd@linaro.org>
[thuth: Add hw/core/cpu.h to migration/dirtyrate.c to fix compile failure]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This pull request contain's Sam Li's zoned storage support in the QEMU block
layer and virtio-blk emulation.
v2:
- Sam fixed the CI failures. CI passes for me now. [Richard]
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmRiWCgACgkQnKSrs4Gr
c8h/7gf+MMm2cGEaf376t8HMwTc6wbXVfbmAlZrge2EXPZfFvEaxj7HClcEraOgV
yJsGWeU6mOw4r68ICJ/4KhrY1cdv+VZym/LsMLMcFUTXFHnyX4pyU3am31FPOI4K
+wrDYJOJhc4DkAESWGgEWiMKpuO/uUEgBmHdW+qPFCl77Yl/eP6H5uNP6nGFn55p
QpS/l8iha7PDkc81EsrjA+e/YI0ubfNSP7+zZElhQ98354CQ0MCfmZ6h9bT+o2bu
R7SBUj80e+2X0a1b9s/2Jz/x8l4TEsl8kr48/Q1usq3GVVkbjEgqsk6wTN13Q/4g
CeIR7E61ZeYzmpb4tLFRIqK2Jw+NEQ==
=Q8xW
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
This pull request contain's Sam Li's zoned storage support in the QEMU block
layer and virtio-blk emulation.
v2:
- Sam fixed the CI failures. CI passes for me now. [Richard]
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmRiWCgACgkQnKSrs4Gr
# c8h/7gf+MMm2cGEaf376t8HMwTc6wbXVfbmAlZrge2EXPZfFvEaxj7HClcEraOgV
# yJsGWeU6mOw4r68ICJ/4KhrY1cdv+VZym/LsMLMcFUTXFHnyX4pyU3am31FPOI4K
# +wrDYJOJhc4DkAESWGgEWiMKpuO/uUEgBmHdW+qPFCl77Yl/eP6H5uNP6nGFn55p
# QpS/l8iha7PDkc81EsrjA+e/YI0ubfNSP7+zZElhQ98354CQ0MCfmZ6h9bT+o2bu
# R7SBUj80e+2X0a1b9s/2Jz/x8l4TEsl8kr48/Q1usq3GVVkbjEgqsk6wTN13Q/4g
# CeIR7E61ZeYzmpb4tLFRIqK2Jw+NEQ==
# =Q8xW
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 15 May 2023 09:04:56 AM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
docs/zoned-storage:add zoned emulation use case
virtio-blk: add some trace events for zoned emulation
block: add accounting for zone append operation
virtio-blk: add zoned storage emulation for zoned devices
block: add some trace events for zone append
qemu-iotests: test zone append operation
block: introduce zone append write for zoned devices
file-posix: add tracking of the zone write pointers
docs/zoned-storage: add zoned device documentation
block: add some trace events for new block layer APIs
iotests: test new zone operations
block: add zoned BlockDriver check to block layer
block/raw-format: add zone operations to pass through requests
block/block-backend: add block layer APIs resembling Linux ZonedBlockDevice ioctls
block/file-posix: introduce helper functions for sysfs attributes
block/block-common: add zoned device structs
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Hi
On this PULL:
- use xxHash for calculate dirty_rate (andrei)
- Create qemu_target_pages_to_MiB() and use them (quintela)
- make dirtyrate target independent (quintela)
- Merge 5 patches from atomic counters series (quintela)
Please apply.
-----BEGIN PGP SIGNATURE-----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=8gfA
-----END PGP SIGNATURE-----
Merge tag 'migration-20230515-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request 20230515
Hi
On this PULL:
- use xxHash for calculate dirty_rate (andrei)
- Create qemu_target_pages_to_MiB() and use them (quintela)
- make dirtyrate target independent (quintela)
- Merge 5 patches from atomic counters series (quintela)
Please apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmRiJoUACgkQ9IfvGFhy
# 1yO1ExAAsSStVAUh/tSgu5fhXydJVkBMO6LOj1k+tA7qylwv4QsqZ/pLNBvY8Zms
# 8/bpYtlvw1LwCSaq01oNA6RhBhkBaZ5x0PUViCY87dsJhu0hEo68Jcp0FkrkW93E
# OiIsp9NU7wpnqd88ZhzjcZ/viWebPw3660V5KY4/8ZZFVxJaKMhG+vW3pGYH8yDR
# TmZK5E5e3t5yiwDRRPrkAw3+e+GDwfwNuOBkk+NBJdL1mOZnIfVwFwxRAXWn/vEM
# f6NdT3aXplsNeKPCN1w9zrLhOJdHeu8IlhWhT/cjTgOKemBJBYzftH6dI/X9D0ix
# ghWAzFSJh1S38gw0mMef1VERJqh7JpAkTq7vT2x7J/0UIbIAru0yRiSrHbNBCcvL
# efsVFtjyseKq70qKN515uoqbK6mlnxP+eECIAUmesUx0bJI9jDWzn+KVc86xUvWy
# +98KDcPuYVxdVp4XHAIsyHYOfTY/tJwG5KI4hYgGP7uxFVr/qus3eBB/Q5BBVPOx
# X0A/760iehfV0V0UmVEt8mC7uDjI0JBouenUHcURAtbsnuGRMCz6s1kLsZYaHuGV
# NhihXq6jnwcvn2nGGnXY44TsgBWesfUrCFZOjJzbaSjGH5UpipC0SECKqh1GKoQP
# kdknvyej5h8egU2QFdS8sCUeXIfwAtHfCamtnui3b3E3iF3TSco=
# =8gfA
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 15 May 2023 05:33:09 AM PDT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [undefined]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20230515-pull-request' of https://gitlab.com/juan.quintela/qemu:
qemu-file: Remove total from qemu_file_total_transferred_*()
qemu-file: Make rate_limit_used an uint64_t
qemu-file: make qemu_file_[sg]et_rate_limit() use an uint64_t
migration: We set the rate_limit by a second
migration: A rate limit value of 0 is valid
migration: Make dirtyrate.c target independent
migration: Teach dirtyrate about qemu_target_page_bits()
migration: Teach dirtyrate about qemu_target_page_size()
Use new created qemu_target_pages_to_MiB()
softmmu: Create qemu_target_pages_to_MiB()
migration/calc-dirty-rate: replaced CRC32 with xxHash
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Taking account of the new zone append write operation for zoned devices,
BLOCK_ACCT_ZONE_APPEND enum is introduced as other I/O request type (read,
write, flush).
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051916.178322-3-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A zone append command is a write operation that specifies the first
logical block of a zone as the write position. When writing to a zoned
block device using zone append, the byte offset of the call may point at
any position within the zone to which the data is being appended. Upon
completion the device will respond with the position where the data has
been written in the zone.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508051510.177850-3-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since Linux doesn't have a user API to issue zone append operations to
zoned devices from user space, the file-posix driver is modified to add
zone append emulation using regular writes. To do this, the file-posix
driver tracks the wp location of all zones of the device. It uses an
array of uint64_t. The most significant bit of each wp location indicates
if the zone type is conventional zones.
The zones wp can be changed due to the following operations issued:
- zone reset: change the wp to the start offset of that zone
- zone finish: change to the end location of that zone
- write to a zone
- zone append
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051510.177850-2-faithilikerun@gmail.com
[Fix errno propagation from handle_aiocb_zone_mgmt()
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Putting zoned/non-zoned BlockDrivers on top of each other is not
allowed.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-6-faithilikerun@gmail.com
Message-id: 20230324090605.28361-6-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org> and clarify that the check is about zoned
BlockDrivers.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add zoned device option to host_device BlockDriver. It will be presented only
for zoned host block devices. By adding zone management operations to the
host_block_device BlockDriver, users can use the new block layer APIs
including Report Zone and four zone management operations
(open, close, finish, reset, reset_all).
Qemu-io uses the new APIs to perform zoned storage commands of the device:
zone_report(zrp), zone_open(zo), zone_close(zc), zone_reset(zrs),
zone_finish(zf).
For example, to test zone_report, use following command:
$ ./build/qemu-io --image-opts -n driver=host_device, filename=/dev/nullb0
-c "zrp offset nr_zones"
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-4-faithilikerun@gmail.com
Message-id: 20230324090605.28361-4-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org> and remove spurious ret = -errno in
raw_co_zone_mgmt().
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use get_sysfs_str_val() to get the string value of device
zoned model. Then get_sysfs_zoned_model() can convert it to
BlockZoneModel type of QEMU.
Use get_sysfs_long_val() to get the long value of zoned device
information.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-3-faithilikerun@gmail.com
Message-id: 20230324090605.28361-3-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-2-faithilikerun@gmail.com
Message-id: 20230324090605.28361-2-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add separate macro EXTIOI_CPUS for extioi interrupt controller, extioi
only supports 4 cpu. And set macro LOONGARCH_MAX_CPUS as 256 so that
loongarch virt machine supports more cpus.
Interrupts from external devices can only be routed cpu 0-3 because
of extioi limits, cpu internal interrupt such as timer/ipi can be
triggered on all cpus.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230512100421.1867848-3-gaosong@loongson.cn>
ipi is used to communicate between cpus, this patch modified
loongarch ipi device as percpu device, so that there are
2 MemoryRegions with ipi device, rather than 2*cpus
MemoryRegions, which may be large than QDEV_MAX_MMIO if
more cpus are added on loongarch virt machine.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230512100421.1867848-2-gaosong@loongson.cn>
Function that convert a number of target_pages into its size in MiB.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230511141208.17779-2-quintela@redhat.com>
Instead of playing with offsetof in various places, use
MMUAccessType to index an array. This is easily defined
instead of the previous dummy padding array in the union.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses have now been expunged.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expose qemu_cpu_list_lock globally so that we can use
WITH_QEMU_LOCK_GUARD and QEMU_LOCK_GUARD to simplify a few code paths
now and in future.
Signed-off-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427020925.51003-2-quic_jiles@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503072331.1747057-83-richard.henderson@linaro.org>
Use uint64_t for the pc, and size_t for the size.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503072331.1747057-81-richard.henderson@linaro.org>
colo_checkpoint_notify() is mostly used in colo.c. Outside we use it
once when x-checkpoint-delay migration parameter is set. So, let's
simplify the external API to only that function - notify COLO that
parameter was set. This make external API more robust and hides
implementation details from external callers. Also this helps us to
make COLO module optional in further patch (i.e. we are going to add
possibility not build the COLO module).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20230428194928.1426370-3-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_refresh_limits() need to hold a reader lock for the graph because
it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-21-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_recurse_can_replace() need to hold a reader lock for the graph
because it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-20-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_query_block_graph_info() need to hold a reader lock for the graph
because it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-19-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of amend
callbacks in BlockDriver need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-17-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_debug_event() need to hold a reader lock for the graph.
Unfortunately we cannot use a co_wrapper_bdrv_rdlock (i.e. make the
coroutine wrapper a no_coroutine_fn), because the function is called
(using the BLKDBG_EVENT macro) by mixed functions that run both in
coroutine and non-coroutine context (for example many of the functions
in qcow2-cluster.c and qcow2-refcount.c).
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-16-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_get_info() need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-15-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_get_allocated_file_size() need to hold a reader lock for the
graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230504115750.54437-14-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drivers were a bit confused about whether .bdrv_open can run in a
coroutine and whether or not it holds a graph lock.
It cannot keep a graph lock from the caller across the whole function
because it both changes the graph (requires a writer lock) and does I/O
(requires a reader lock). Therefore, it should take these locks
internally as needed.
The functions used to be called in coroutine context during image
creation. This was buggy for other reasons, and as of commit 32192301,
all block drivers go through no_co_wrappers. So it is not called in
coroutine context any more.
Fix qcow2 and qed to work with the correct assumptions: The graph lock
needs to be taken internally instead of just assuming it's already
there, and the coroutine path is dead code that can be removed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-9-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
GRAPH_RDLOCK_GUARD() and GRAPH_RDLOCK_GUARD_MAINLOOP() only take a
reader lock for the graph, so the correct annotation for them to use is
TSA_ASSERT_SHARED rather than TSA_ASSERT.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230504115750.54437-8-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For some functions, it is part of their interface to be called without
holding the graph lock. Add a new macro to document this.
The macro expands to TSA_EXCLUDES(), which is a relatively weak check
because it passes in cases where the compiler just doesn't know if the
lock is held. Function pointers can't be checked at all. Therefore, its
primary purpose is documentation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-7-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These functions must not be called in coroutine context, because they
need write access to the graph.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Migration code can call bdrv_activate() in coroutine context, whereas
other callers call it outside of coroutines. As it calls other code that
is not supposed to run in coroutines, standardise on running outside of
coroutines.
This adds a no_co_wrapper to switch to the main loop before calling
bdrv_activate().
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no need for the AioContext lock in aio_wait_bh_oneshot().
It's easy to remove the lock from existing callers and then switch from
AIO_WAIT_WHILE() to AIO_WAIT_WHILE_UNLOCKED() in aio_wait_bh_oneshot().
Document that the AioContext lock should not be held across
aio_wait_bh_oneshot(). Holding a lock across aio_poll() can cause
deadlock so we don't want callers to do that.
This is a step towards getting rid of the AioContext lock.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230404153307.458883-1-stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After the recent introduction of many new coroutine callbacks,
a couple calls from non-coroutine_fn to coroutine_fn have sneaked
in; fix them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230406101752.242125-1-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit cf60ccc330 ("cutils: Introduce bundle mechanism") abandoned
compatibility with Windows older than 8 - we should reflect this
in our _WIN32_WINNT and set it to the value that corresponds to
Windows 8.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230504081351.125140-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While the old type was correct in the ideal sense, some ABIs require
the argument to be zero-extended. Using uint32_t for all such values
is a decent compromise.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove the old interfaces with the implicit MemOp argument.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230502135741.1158035-10-richard.henderson@linaro.org>
Add signature and signature-granularity properties in spike to specify the target
signatrue file and the line size for signature data.
Recgonize the signature section between begin_signature and end_signature symbols
when loading elf of ACT tests. Then dump signature data in signature section just
before the ACT tests exit.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230405095720.75848-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At least RISC-V has the need to be able to perform a read
using execute permissions, outside of translation.
Add helpers to facilitate this.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-9-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-9-richard.henderson@linaro.org>
Clang 14, with --enable-tcg-interpreter errors with
include/qemu/int128.h:487:16: error: alignment of field 'i' (128 bits)
does not match the alignment of the first field in transparent union;
transparent_union attribute ignored [-Werror,-Wignored-attributes]
__int128_t i;
^
include/qemu/int128.h:486:12: note: alignment of first field is 64 bits
Int128 s;
^
1 error generated.
By placing the __uint128_t member first, this is avoided.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230501204625.277361-1-richard.henderson@linaro.org>
Add tcg expander and helper functions for rotate right
vector with scalar operand.
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Message-Id: <20230428144757.57530-10-lawrence.hunter@codethink.co.uk>
[rth: Split out of larger patch; mask rotation count.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add tcg expander and helper functions for and-compliment
vector with scalar operand.
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Message-Id: <20230428144757.57530-10-lawrence.hunter@codethink.co.uk>
[rth: Split out of larger patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is for use in the RISC-V vclz and vctz instructions (implemented in
proceeding commit).
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230428144757.57530-11-lawrence.hunter@codethink.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rotates have been fixed up to only allow for reasonable rotate amounts
(ie, no rotates >7 on an 8b value etc.) This fixes a problem with riscv
vector rotate instructions.
Signed-off-by: Dickon Hood <dickon.hood@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230428144757.57530-9-lawrence.hunter@codethink.co.uk>
[rth: Mask shifts in both directions.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The arm boot.c code includes a utility function write_bootloader()
which assists in writing a boot-code fragment into guest memory,
including handling endianness and fixing it up with entry point
addresses and similar things. This is useful not just for the boot.c
code but also in board model code, so rename it to
arm_write_bootloader() and make it globally visible.
Since we are making it public, make its API a little neater: move the
AddressSpace* argument to be next to the hwaddr argument, and allow
the fixupcontext array to be const, since we never modify it in this
function.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230424152717.1333930-2-peter.maydell@linaro.org
[PMM: Split out from another patch by Cédric, added doc comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'singlestep' HMP command is confusing, because it doesn't
actually have anything to do with single-stepping the CPU. What it
does do is force TCG emulation to put one guest instruction in each
TB, which can be useful in some situations.
Create a new HMP command 'one-insn-per-tb', so we can document that
'singlestep' is just a deprecated synonym for it, and eventually
perhaps drop it.
We aren't obliged to do deprecate-and-drop for HMP commands,
but it's easy enough to do so, so we do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-9-peter.maydell@linaro.org
The only place left that looks at the old 'singlestep' global
variable is the TCG curr_cflags() function. Replace the old global
with a new 'one_insn_per_tb' which is defined in tcg-all.c and
declared in accel/tcg/internal.h. This keeps it restricted to the
TCG code, unlike 'singlestep' which was available to every file in
the system and defined in multiple different places for softmmu vs
linux-user vs bsd-user.
While we're making this change, use qatomic_read() and qatomic_set()
on the accesses to the new global, because TCG will read it without
holding a lock.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-4-peter.maydell@linaro.org
This query copies the kernel command line into the message buffer. It
was previously stubbed out to return empty, this commit makes it reflect
the arguments specified with `-append`.
I observed the following peculiarities on my Pi 3B+:
- If the buffer is shorter than the string, the response header gives
the full length, but no data is actually copied.
- No NUL terminator is added: even if the buffer is long enough to fit
one, the buffer's original contents are preserved past the string's
end.
- The VC firmware adds the following extra parameters beside the
user-supplied ones (via /boot/cmdline.txt): `video`, `vc_mem.mem_base`
and `vc_mem.mem_size`. This is currently not implemented in qemu.
Signed-off-by: Daniel Bertalan <dani@danielbertalan.dev>
Message-id: 20230425103250.56653-1-dani@danielbertalan.dev
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added comment about NUL and short-buffer behaviour]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Update kernel headers to 6.3rc5
* Suppress GCC13 false positive in aio_bh_poll()
* Add new x86 feature bits
* Coverity fixes
* More steps towards removing qatomic_mb_set/read
* Fix reduced-phys-bits value for AMD SEV
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNC0IUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNo0wgArWNGKZpbmQ0e5L6ajMvaaPmg4mVL
a2SJGU0TwTp0fUgZr14z2iwzIpSqQrsqhzTIAzOTs0OICDBPBuNvnRucMa+SVQGO
Tc89YAwBVDo66dAKhWi+WR9tx7sTFCso0nbsBfczzdnwAw3g1MJ87Ueqc5tlPGBK
E7YSAD6l4UuogoN5BLU7bSsG/X7bwcyzeUXRB4ik+Z9abWd4DH9qiROnBKLMmBLK
nAi47h8b8MltWORpO+wf6HtkMKi37SAzl9VLHVuHcRhIdY/JhWCRhYSo0HXhgX66
JLVkyxFpIndT0dUW/xnqATGez92FRZyTxHbxbAcWM0SoC1jOVfUXB+7Gdw==
=vxou
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Fix compilation issues under Debian 10
* Update kernel headers to 6.3rc5
* Suppress GCC13 false positive in aio_bh_poll()
* Add new x86 feature bits
* Coverity fixes
* More steps towards removing qatomic_mb_set/read
* Fix reduced-phys-bits value for AMD SEV
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNC0IUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNo0wgArWNGKZpbmQ0e5L6ajMvaaPmg4mVL
# a2SJGU0TwTp0fUgZr14z2iwzIpSqQrsqhzTIAzOTs0OICDBPBuNvnRucMa+SVQGO
# Tc89YAwBVDo66dAKhWi+WR9tx7sTFCso0nbsBfczzdnwAw3g1MJ87Ueqc5tlPGBK
# E7YSAD6l4UuogoN5BLU7bSsG/X7bwcyzeUXRB4ik+Z9abWd4DH9qiROnBKLMmBLK
# nAi47h8b8MltWORpO+wf6HtkMKi37SAzl9VLHVuHcRhIdY/JhWCRhYSo0HXhgX66
# JLVkyxFpIndT0dUW/xnqATGez92FRZyTxHbxbAcWM0SoC1jOVfUXB+7Gdw==
# =vxou
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 29 Apr 2023 01:19:14 PM BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
cpus-common: stop using mb_set/mb_read
async: Suppress GCC13 false positive in aio_bh_poll()
tests: vhost-user-test: release mutex on protocol violation
Update linux headers to v6.3rc5
update-linux-headers.sh: Add missing kernel headers.
Fix libvhost-user.c compilation.
target/i386: Add support for PREFETCHIT0/1 in CPUID enumeration
target/i386: Add support for AVX-NE-CONVERT in CPUID enumeration
target/i386: Add support for AVX-VNNI-INT8 in CPUID enumeration
target/i386: Add support for AVX-IFMA in CPUID enumeration
target/i386: Add support for AMX-FP16 in CPUID enumeration
target/i386: Add support for CMPCCXADD in CPUID enumeration
i386/cpu: Update how the EBX register of CPUID 0x8000001F is set
i386/sev: Update checks and information related to reduced-phys-bits
qemu-options.hx: Update the reduced-phys-bits documentation
qapi, i386/sev: Change the reduced-phys-bits value from 5 to 1
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Devices can pass their MemoryReentrancyGuard (from their DeviceState),
when creating new BHes. Then, the async API will toggle the guard
before/after calling the BH call-back. This prevents bh->mmio reentrancy
issues.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20230427211013.2994127-3-alxndr@bu.edu>
[thuth: Fix "line over 90 characters" checkpatch.pl error]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
- Protect BlockBackend.queued_requests with its own lock
- Switch to AIO_WAIT_WHILE_UNLOCKED() where possible
- AioContext removal: LinuxAioState/LuringState/ThreadPool
- Add more coroutine_fn annotations, use bdrv/blk_co_*
- Fix crash when execute hmp_commit
-----BEGIN PGP SIGNATURE-----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=mpYX
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- Protect BlockBackend.queued_requests with its own lock
- Switch to AIO_WAIT_WHILE_UNLOCKED() where possible
- AioContext removal: LinuxAioState/LuringState/ThreadPool
- Add more coroutine_fn annotations, use bdrv/blk_co_*
- Fix crash when execute hmp_commit
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmRH0b0RHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9Y0yw/6A/vzA4TGgFUP3WIvH/sQri4/V3gyR+PT
# u3hOQUCYZ99nioTpKV91TSuUPuU/Mdspy/0NKM+K92yIXqxa9172A2zLOsGOu21l
# qKpse+nBf1zqEgB8YzUHyCBdetPz916C/f9RS26SNUCW85GCHYGHA3u7nKvWLMyV
# oKIoTlA8QOglOuEKlRoYh7hCFm7ET51NOSEftm8GsYbsW/I2Vzl8a1SHN1lHufjd
# We3+898zUrmFqNMp6Rjdhn+yZmmoGzoZqV4YQi83z7xjiv+Ms4VHVVW7X8d20xRX
# 5BLFiLHAuZ/1d26HyVhgBUr7KHyf94odocz8BylWKXGl5SXMCZun1Td1vgVKlGK+
# GRxzB2cWGWqzC2UmqSTc0Z0aIWbXukKwvcX76uBKsQZ+kB2A7jFobxHiaoQEDJ8B
# WRNEMH2+CqCAu9rsrNRinnJKhT2nXcr9F9YfwRIlagdAePGWin+EUW8huf14dDBm
# Z2Y34aKW4RQibF8xirMHeRBbOLmcq2VpKLKwNfBHUDgZB8iuD7bLn4n9nwWXMG1w
# zgNsTybkv46vLPamTpEaUoNTHfuRDTAuE7Z7lkcc7jF41Z0V1DC/DCCWcL/0LvhP
# GIxFdkYug3hetdF2U/OZhUoEfxvkqcuBnrr55LFzqheKEllQpPwPpt7UF0aH8bg3
# i/YpjHsf3xU=
# =mpYX
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 25 Apr 2023 02:12:29 PM BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (25 commits)
block/monitor: Fix crash when executing HMP commit
vmdk: make vmdk_is_cid_valid a coroutine_fn
qcow2: mark various functions as coroutine_fn and GRAPH_RDLOCK
tests: mark more coroutine_fns
qemu-pr-helper: mark more coroutine_fns
9pfs: mark more coroutine_fns
nbd: mark more coroutine_fns, do not use co_wrappers
mirror: make mirror_flush a coroutine_fn, do not use co_wrappers
blkdebug: add missing coroutine_fn annotation
vvfat: mark various functions as coroutine_fn
thread-pool: avoid passing the pool parameter every time
thread-pool: use ThreadPool from the running thread
io_uring: use LuringState from the running thread
linux-aio: use LinuxAioState from the running thread
block: add missing coroutine_fn to bdrv_sum_allocated_file_size()
include/block: fixup typos
monitor: convert monitor_cleanup() to AIO_WAIT_WHILE_UNLOCKED()
hmp: convert handle_hmp_command() to AIO_WAIT_WHILE_UNLOCKED()
block: convert bdrv_drain_all_begin() to AIO_WAIT_WHILE_UNLOCKED()
block: convert bdrv_graph_wrlock() to AIO_WAIT_WHILE_UNLOCKED()
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
thread_pool_submit_aio() is always called on a pool taken from
qemu_get_current_aio_context(), and that is the only intended
use: each pool runs only in the same thread that is submitting
work to it, it can't run anywhere else.
Therefore simplify the thread_pool_submit* API and remove the
ThreadPool function parameter.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-5-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use qemu_get_current_aio_context() where possible, since we always
submit work to the current thread anyways.
We want to also be sure that the thread submitting the work is
the same as the one processing the pool, to avoid adding
synchronization to the pool list.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-4-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove usage of aio_context_acquire by always submitting asynchronous
AIO to the current thread's LuringState.
In order to prevent mistakes from the caller side, avoid passing LuringState
in luring_io_{plug/unplug} and luring_co_submit, and document the functions
to make clear that they work in the current thread's AioContext.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-3-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove usage of aio_context_acquire by always submitting asynchronous
AIO to the current thread's LinuxAioState.
In order to prevent mistakes from the caller side, avoid passing LinuxAioState
in laio_io_{plug/unplug} and laio_co_submit, and document the functions
to make clear that they work in the current thread's AioContext.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-2-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fixup a few minor typos
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20230313003744.55476-1-wilfred.mallawa@opensource.wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mostly just fixes, cleanups all over the place.
Some optimizations.
More control over slot_reserved_mask.
More feature bits supported for SVQ.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRHQvAPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpQc0H/RD+RXy7IAnmhkdCyjj0hM8pftPTwCJfrSCW
DLHP4c5jiKO5ngUoAv3YJdM77TBCXlJn6gceeKBrzhGUTtJ7dTLC+Udeq/jW43EF
/E2ldLLbTNFyUqW8yX7D+EVio7Jy4zXTHpczKCF5vO7MaVWS/b3QdCpmjXpEHLNb
janv24vQHHgmRwK96uIdIauJJT8aqYW0arn1po8anxuFS8ok9Tf8LTEF5uBHokJP
MriTwMaqMgRK+4rzh+b6wc7QC5GqIr44gFrsfFYuNOUY0+BizvGvUAtMt+B/XZwt
OF4RSShUh2bhsQoYwgvShfEsR/vWwOl3yMAhcsB+wMgMzMG8MUQ=
=e8DF
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes, features, cleanups
Mostly just fixes, cleanups all over the place.
Some optimizations.
More control over slot_reserved_mask.
More feature bits supported for SVQ.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRHQvAPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpQc0H/RD+RXy7IAnmhkdCyjj0hM8pftPTwCJfrSCW
# DLHP4c5jiKO5ngUoAv3YJdM77TBCXlJn6gceeKBrzhGUTtJ7dTLC+Udeq/jW43EF
# /E2ldLLbTNFyUqW8yX7D+EVio7Jy4zXTHpczKCF5vO7MaVWS/b3QdCpmjXpEHLNb
# janv24vQHHgmRwK96uIdIauJJT8aqYW0arn1po8anxuFS8ok9Tf8LTEF5uBHokJP
# MriTwMaqMgRK+4rzh+b6wc7QC5GqIr44gFrsfFYuNOUY0+BizvGvUAtMt+B/XZwt
# OF4RSShUh2bhsQoYwgvShfEsR/vWwOl3yMAhcsB+wMgMzMG8MUQ=
# =e8DF
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 25 Apr 2023 04:03:12 AM BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (31 commits)
hw/pci-bridge: Make PCIe and CXL PXB Devices inherit from TYPE_PXB_DEV
hw/pci-bridge: pci_expander_bridge fix type in pxb_cxl_dev_reset()
docs/specs: Convert pci-testdev.txt to rst
docs/specs: Convert pci-serial.txt to rst
docs/specs/pci-ids: Convert from txt to rST
acpi: pcihp: allow repeating hot-unplug requests
virtio: i2c: Check notifier helpers for VIRTIO_CONFIG_IRQ_IDX
docs: Remove obsolete descriptions of SR-IOV support
intel_iommu: refine iotlb hash calculation
docs/cxl: Fix sentence
MAINTAINERS: Add Eugenio Pérez as vhost-shadow-virtqueue reviewer
tests: bios-tables-test: replace memset with initializer
hw/acpi: limit warning on acpi table size to pc machines older than version 2.3
Add my old and new work email mapping and use work email to support acpi
vhost-user-blk-server: notify client about disk resize
pci: avoid accessing slot_reserved_mask directly outside of pci.c
hw: Add compat machines for 8.1
hw/i386/amd_iommu: Factor amdvi_pci_realize out of amdvi_sysbus_realize
hw/i386/amd_iommu: Set PCI static/const fields via PCIDeviceClass
hw/i386/amd_iommu: Move capab_offset from AMDVIState to AMDVIPCIState
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Previously, PXB_CXL_DEVICE, PXB_PCIE_DEVICE and PXB_DEVICE all
have PCI_DEVICE as their direct parent but share a common state
struct PXBDev. convert_to_pxb() is used to get the PXBDev
instance from which ever of these types it is called on.
This patch switches to an explicit hierarchy based on shared
functionality. To allow use of OBJECT_DECLARE_SIMPLE_TYPE()
whilst minimizing code changes, all types are renamed to have
the postfix _DEV rather than _DEVICE. The new heirarchy
has PXB_CXL_DEV with parent PXB_PCIE_DEV which in turn
has parent PXB_DEV which continues to have parent PCI_DEVICE.
This allows simple use of PXB_DEV() etc rather than a custom function
+ removal of duplicated properties and moving the CXL specific
elements out of struct PXBDev.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230420142750.6950-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
i440fx machine versions 2.3 and newer supports dynamic ram
resizing. See commit a1666142db ("acpi-build: make ROMs RAM blocks resizeable") .
Currently supported all q35 machine types (versions 2.4 and newer) supports
resizable RAM/ROM blocks.Therefore the warning generated when the ACPI table
size exceeds a pre-defined value does not apply to those machine versions.
Add a check limiting the warning message to only those machines that does not
support expandable ram blocks (that is, i440fx machines with version 2.2
and older).
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230329045726.14028-1-anisinha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is only used there, so we can make it static.
Once there, remove spice.h that it is not used.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
fix David Edmonson ui/qemu-spice.h unintended removal
This new helper fetches file system type for a fd. Only Linux is
implemented so far. Currently only tmpfs and hugetlbfs are defined,
but it can grow as needed.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmRBLgoACgkQda1lgCoL
QhEPyQf/WfEg8k2hDLExobsSgup1IsnT+mHHTBOZVJvq2efg2YXUTHA56fmD9X6d
crqTq68L5oaMES5iYEZhA7EAgfk3RvxDQGrlXBByPzrc6SSwEHHMR4Zzi5zrbCoW
t6TmaKQrlQqYwkhhsbyqnG46bj0ugCDagkBLfJdVl96fjkYgTspcDxaNwqwy/DPn
GTmQlvdRY09D1nylIdtcLBIfsM+sIkRslyngbUEIy+Bx8EWRy2a8Qw0BdY9g1XoE
e0CaRaFMpju1KOIjq0YSIzt0LSQDFfPc1IlUAC0ZALhNmp+PPNtr4E7+4kFfO2ym
1sT2w25ho8dYDdm/m8tIauCdGoHw4A==
=ML27
-----END PGP SIGNATURE-----
Merge tag 'pull-tpm-2023-04-20-1' of https://github.com/stefanberger/qemu-tpm into staging
Merge tpm 2023/04/20 v1
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmRBLgoACgkQda1lgCoL
# QhEPyQf/WfEg8k2hDLExobsSgup1IsnT+mHHTBOZVJvq2efg2YXUTHA56fmD9X6d
# crqTq68L5oaMES5iYEZhA7EAgfk3RvxDQGrlXBByPzrc6SSwEHHMR4Zzi5zrbCoW
# t6TmaKQrlQqYwkhhsbyqnG46bj0ugCDagkBLfJdVl96fjkYgTspcDxaNwqwy/DPn
# GTmQlvdRY09D1nylIdtcLBIfsM+sIkRslyngbUEIy+Bx8EWRy2a8Qw0BdY9g1XoE
# e0CaRaFMpju1KOIjq0YSIzt0LSQDFfPc1IlUAC0ZALhNmp+PPNtr4E7+4kFfO2ym
# 1sT2w25ho8dYDdm/m8tIauCdGoHw4A==
# =ML27
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 01:20:26 PM BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* tag 'pull-tpm-2023-04-20-1' of https://github.com/stefanberger/qemu-tpm:
qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller
qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it
qtest: Add functions for accessing devices on Aspeed I2C controller
tests/avocado/aspeed: Add TPM TIS I2C test
tpm: Add support for TPM device over I2C bus
tpm: Extend common APIs to support TPM TIS I2C
docs: Add support for TPM devices over I2C bus
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Allow setting a chardev input file on the command line
* Fix .travis.yml to work with non-public Travis instances, too
* Move a lot of code from specifc_ss into softmmu_ss
* Add a test case for TPM TIS I2C connected to Aspeed I2C controller
* Update tests/vm/freebsd to version 13
* Some more misc minor fixes here and there
-----BEGIN PGP SIGNATURE-----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=8ZFL
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-04-20' of https://gitlab.com/thuth/qemu into staging
* Compat machines for version 8.1
* Allow setting a chardev input file on the command line
* Fix .travis.yml to work with non-public Travis instances, too
* Move a lot of code from specifc_ss into softmmu_ss
* Add a test case for TPM TIS I2C connected to Aspeed I2C controller
* Update tests/vm/freebsd to version 13
* Some more misc minor fixes here and there
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmRBDtMRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXfjw//UYytlyZsDOLAMfFNGQViMmVf29KbrDRe
# doDh4Nl1oZLNKm9C5XlQExhsRbLm6Hi9nyQvSCJs4CvZ1jBY6U7GfgMNIaozXWb3
# 4gQyJb9ACe/z8bQmPUVF2sdW1QZ9zpf8LWpCOTGUZiI2Tevzkz7b/F5ZxiQiseG6
# dXe8UIwdZhG4jz2+6viqjHiGlKoBkegGYoJthcwnR07aRz2woiNr7rKRiJEiv2G7
# UfMVB96uLkpEhaDoohz440/rjviazO1nt6HDvgEajXT1X5P/8phT9IvT7olAZXZH
# R2Qm6YyYcSWavoPms3AryAWG8FjomcyBjuebfAVW5/x+fl/401sn9quBMoZrYPEX
# dfzF64vVokdXNQEH6+qc95PdB6/+d0CZPY8ilMRtAttf2sMw7IgqhG3zDLbj9t6R
# dns2/DY9zu2pp07IEAXn/iVbW4rl2HADUQncr6B/cPy++lYiFvv7LX8OE+YWOsk0
# gvxzYx6rRhr5j7xT1sP30pLwsG3mX7qRDfba1Bt19CzSbu7UGN+w+S1xclgZDoqE
# 0AZIeVUuqqNTEoBLoa2xHUDGs9NjeI2+qIh0R5csS/bqDscLXj0cOluvJO48n4Rt
# +SGQSCSmU/lxn6EbBz4tw3orlp0clBH9fEaSg9lYxuUTYvQOpdYS7u4d63VQFvzp
# dwQ9LRDFNsA=
# =8ZFL
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 11:07:15 AM BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-04-20' of https://gitlab.com/thuth/qemu: (23 commits)
tests/vm/freebsd: Update to FreeBSD 13.2
qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller
qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it
qtest: Add functions for accessing devices on Aspeed I2C controller
MAINTAINERS: Add Juan Quintela to developer guides review
cpu: Remove parameter of list_cpus()
hw/core: Move numa.c into the target independent source set
softmmu: Move dirtylimit.c into the target independent source set
hw/display: Compile vga.c as target-independent code
softmmu: Make qtest.c target independent
include/exec: Provide the tswap() functions for target independent code, too
softmmu/qtest: Move the target-specific pseries RTAS code out of qtest.c
hw/char: Move two more files from specific_ss to softmmu_ss
target/i386: Set family/model/stepping of the "max" CPU according to LM bit
tests/migration: Only run auto_converge in slow mode
travis.yml: Add missing 'flex', 'bison' packages to 'GCC (user)' job
travis.yml: Add missing clang-10 package to the 'Clang (disable-tcg)' job
chardev: Allow setting file chardev input file on the command line
qtest: Don't assert on "-qtest chardev:myid"
test: Fix test-crypto-secret when compiling without keyring support
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch provides accessor functions as replacements for direct
access to slot_reserved_mask according to the comment at the top
of include/hw/pci/pci_bus.h which advises that data structures for
PCIBus should not be directly accessed but instead be accessed using
accessor functions in pci.h.
Three accessor functions can conveniently replace all direct accesses
of slot_reserved_mask. With this patch, the new accessor functions are
used in hw/sparc64/sun4u.c and hw/xen/xen_pt.c and pci_bus.h is removed
from the included header files of the same two files.
No functional change intended.
Signed-off-by: Chuck Zmudzinski <brchuckz@aol.com>
Message-Id: <b1b7f134883cbc83e455abbe5ee225c71aa0e8d0.1678888385.git.brchuckz@aol.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [sun4u]
Add 8.1 machine types for arm/i440fx/m68k/q35/s390x/spapr.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20230314173009.152667-1-cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
