Commit Graph

1649 Commits

Author SHA1 Message Date
Peter Maydell c1e0371442 target-arm: ignore ELR_ELx[1] for exception return to 32-bit ARM mode
The architecture requires that for an exception return to AArch32 the
low bits of ELR_ELx are ignored when the PC is set from them:
 * if returning to Thumb mode, ignore ELR_ELx[0]
 * if returning to ARM mode, ignore ELR_ELx[1:0]

We were only squashing bit 0; also squash bit 1 if the SPSR T bit
indicates this is a return to ARM code.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21 14:15:09 +00:00
Peter Maydell e393f339af target-arm: Implement remaining illegal return event checks
We already implement almost all the checks for the illegal
return events from AArch64 state described in the ARM ARM section
D1.11.2. Add the two missing ones:
 * return to EL2 when EL3 is implemented and SCR_EL3.NS is 0
 * return to Non-secure EL1 when EL2 is implemented and HCR_EL2.TGE is 1

(We don't implement external debug, so the case of "debug state exit
from EL0 using AArch64 state to EL0 using AArch32 state" doesn't apply
for QEMU.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21 14:15:09 +00:00
Peter Maydell 3809951bf6 target-arm: Handle exception return from AArch64 to non-EL0 AArch32
Remove the assumptions that the AArch64 exception return code was
making about a return to AArch32 always being a return to EL0.
This includes pulling out the illegal-SPSR checks so we can apply
them for return to 32 bit as well as return to 64-bit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21 14:15:09 +00:00
Peter Maydell 3d6f761713 target-arm: Fix wrong AArch64 entry offset for EL2/EL3 target
The entry offset when taking an exception to AArch64 from a lower
exception level may be 0x400 or 0x600. 0x400 is used if the
implemented exception level immediately lower than the target level
is using AArch64, and 0x600 if it is using AArch32. We were
incorrectly implementing this as checking the exception level
that the exception was taken from. (The two can be different if
for example we take an exception from EL0 to AArch64 EL3; we should
in this case be checking EL2 if EL2 is implemented, and EL1 if
EL2 is not implemented.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21 14:15:08 +00:00
Peter Maydell 904c04de2e target-arm: Pull semihosting handling out to arm_cpu_do_interrupt()
Handling of semihosting calls should depend on the register width
of the calling code, not on that of any higher exception level,
so we need to identify and handle semihosting calls before we
decide whether to deliver the exception as an entry to AArch32
or AArch64. (EXCP_SEMIHOST is also an "internal exception" so
it has no target exception level in the first place.)

This will allow AArch32 EL1 code to use semihosting calls when
running under an AArch64 EL3.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-21 14:15:08 +00:00
Peter Maydell 966f758c49 target-arm: Use a single entry point for AArch64 and AArch32 exceptions
If EL2 or EL3 is present on an AArch64 CPU, then exceptions can be
taken to an exception level which is running AArch32 (if only EL0
and EL1 are present then EL1 must be AArch64 and all exceptions are
taken to AArch64). To support this we need to have a single
implementation of the CPU do_interrupt() method which can handle both
32 and 64 bit exception entry.

Pull the common parts of aarch64_cpu_do_interrupt() and
arm_cpu_do_interrupt() out into a new function which calls
either the AArch32 or AArch64 specific entry code once it has
worked out which one is needed.

We temporarily special-case the handling of EXCP_SEMIHOST to
avoid an assertion in arm_el_is_aa64(); the next patch will
pull all the semihosting handling out to the arm_cpu_do_interrupt()
level (since semihosting semantics depend on the register width
of the calling code, not on that of any higher EL).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21 14:15:08 +00:00
Peter Maydell f3a9b6945c target-arm: Move aarch64_cpu_do_interrupt() to helper.c
Move the aarch64_cpu_do_interrupt() function to helper.c. We want
to be able to call this from code that isn't AArch64-only, and
the move allows us to avoid awkward #ifdeffery at the callsite.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21 14:15:08 +00:00
Peter Maydell 446c81abf8 target-arm: Properly support EL2 and EL3 in arm_el_is_aa64()
Support EL2 and EL3 in arm_el_is_aa64() by implementing the
logic for checking the SCR_EL3 and HCR_EL2 register-width bits
as appropriate to determine the register width of lower exception
levels.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21 14:15:08 +00:00
Peter Maydell 5ce4ff6502 target-arm: Support multiple address spaces in page table walks
If we have a secure address space, use it in page table walks:
when doing the physical accesses to read descriptors, make them
through the correct address space.

(The descriptor reads are the only direct physical accesses
made in target-arm/ for CPUs which might have TrustZone.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21 14:15:07 +00:00
Peter Maydell 0faea0c7e6 target-arm: Implement cpu_get_phys_page_attrs_debug
Implement cpu_get_phys_page_attrs_debug instead of cpu_get_phys_page_debug.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21 14:15:07 +00:00
Peter Maydell 017518c1f6 target-arm: Implement asidx_from_attrs
Implement the asidx_from_attrs CPU method to return the
Secure or NonSecure address space as appropriate.

(The function is inline so we can use it directly in target-arm
code to be added in later patches.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21 14:15:06 +00:00
Peter Maydell 9e273ef217 target-arm: Add QOM property for Secure memory region
Add QOM property to the ARM CPU which boards can use to tell us what
memory region to use for secure accesses. Nonsecure accesses
go via the memory region specified with the base CPU class 'memory'
property.

By default, if no secure region is specified it is the same as the
nonsecure region, and if no nonsecure region is specified we will use
address_space_memory.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21 14:15:06 +00:00
Peter Maydell 74c21bd074 target-arm: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1449505425-32022-3-git-send-email-peter.maydell@linaro.org
2016-01-18 16:33:32 +00:00
Andrew Jones ade0d0c0d3 target-arm: dump-guest-memory: add vfp notes for arm
gdb won't actually dump these with 'info all-registers' since
it first tries to confirm that it should by checking the VFP
hwcap in the .auxv note. Well, we don't generate an .auxv note.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-9-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15 14:55:16 +00:00
Andrew Jones bada8e4470 target-arm: dump-guest-memory: add prfpreg notes for aarch64
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-7-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15 14:55:16 +00:00
Andrew Jones da2b91409f target-arm: support QMP dump-guest-memory
Add the support needed for creating prstatus elf notes. This
allows us to use QMP dump-guest-memory.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 1452542185-10914-6-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: moved setting of cpu::write_elf64_note inside !CONFIG_USER_ONLY
 ifdef to avoid compile failure for linux-user build]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15 14:40:25 +00:00
Alvise Rigo deb2db996c target-arm: Use the right MMU index in arm_regime_using_lpae_format
arm_regime_using_lpae_format checks whether the LPAE extension is used
for stage 1 translation regimes. MMU indexes not exclusively of a stage 1
regime won't work with this method.

In case of ARMMMUIdx_S12NSE0 or ARMMMUIdx_S12NSE1, offset these values
by ARMMMUIdx_S1NSE0 to get the right index indicating a stage 1
translation regime.

Rename also the function to arm_s1_regime_using_lpae_format and update
the comments to reflect the change.

Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
Message-id: 1452854262-19550-1-git-send-email-a.rigo@virtualopensystems.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15 14:10:02 +00:00
Markus Armbruster 9af9e0fed7 error: Strip trailing '\n' from error string arguments (again)
Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they
keep coming back.  Tracked down with the Coccinelle semantic patch
from commit 312fd5f.

Cc: Fam Zheng <famz@redhat.com>
Cc: Peter Crosthwaite <crosthwaitepeter@gmail.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Changchun Ouyang <changchun.ouyang@intel.com>
Cc: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-17-git-send-email-armbru@redhat.com>
2016-01-13 15:16:18 +01:00
Paolo Bonzini 15eafc2e60 kvm: x86: add support for KVM_CAP_SPLIT_IRQCHIP
This patch adds support for split IRQ chip mode. When
KVM_CAP_SPLIT_IRQCHIP is enabled:

    1.) The PIC, PIT, and IOAPIC are implemented in userspace while
    the LAPIC is implemented by KVM.

    2.) The software IOAPIC delivers interrupts to the KVM LAPIC via
    kvm_set_irq. Interrupt delivery is configured via the MSI routing
    table, for which routes are reserved in target-i386/kvm.c then
    configured in hw/intc/ioapic.c

    3.) KVM delivers IOAPIC EOIs via a new exit KVM_EXIT_IOAPIC_EOI,
    which is handled in target-i386/kvm.c and relayed to the software
    IOAPIC via ioapic_eoi_broadcast.

Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:47 +01:00
Alex Bennée 34c45d5302 target-arm: kvm - re-inject guest debug exceptions
If we can't find details for the debug exception in our debug state
then we can assume the exception is due to debugging inside the guest.
To inject the exception into the guest state we re-use the TCG exception
code (do_interrupt).

However while guest debugging is in effect we currently can't handle the
guest using single step as we will keep trapping to back to userspace.
GDB makes heavy use of single-step behind the scenes which effectively
means the guest's ability to debug itself is disabled while it is being
debugged.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-6-git-send-email-alex.bennee@linaro.org
[PMM: Fixed a few typos in comments and commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Alex Bennée e4482ab7e3 target-arm: kvm - add support for HW assisted debug
This adds basic support for HW assisted debug. The ioctl interface to
KVM allows us to pass an implementation defined number of break and
watch point registers. When KVM_GUESTDBG_USE_HW is specified these
debug registers will be installed in place on the world switch into the
guest.

The hardware is actually capable of more advanced matching but it is
unclear if this expressiveness is available via the gdbstub protocol.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-5-git-send-email-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Alex Bennée 26ae593485 target-arm: kvm - support for single step
This adds support for single-step. There isn't much to do on the QEMU
side as after we set-up the request for single step via the debug ioctl
it is all handled within the kernel.

The actual setting of the KVM_GUESTDBG_SINGLESTEP flag is already in the
common code. If the kernel doesn't support guest debug the ioctl will
simply error.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-4-git-send-email-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Alex Bennée 2ecb2027bc target-arm: kvm - implement software breakpoints
These don't involve messing around with debug registers, just setting
the breakpoint instruction in memory. GDB will not use this mechanism if
it can't access the memory to write the breakpoint.

All the kernel has to do is ensure the hypervisor traps the breakpoint
exceptions and returns to userspace.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-3-git-send-email-alex.bennee@linaro.org
[PMM: Fixed typo in comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Alex Bennée 29eb3d9a91 target-arm: kvm64 - introduce kvm_arm_init_debug()
As we haven't always had guest debug support we need to probe for it.
Additionally we don't do this in the start-up capability code so we
don't fall over on old kernels.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-2-git-send-email-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:14 +00:00
Sergey Fedorov 7999a5c8f6 target-arm: Fix and improve AA32 singlestep translation completion code
The AArch32 translation completion code for singlestep enabled/active
case was a way more confusing and too repetitive then it needs to be.
Probably that was the cause for a bug to be introduced into it at some
point. The bug was that SWI/HVC/SMC exception would be generated in
condition-failed instruction code path whereas it shouldn't.

This patch rewrites the code in a way similar to the non-singlestep
case.

In the condition-passed/unconditional instruction code path we need to:
 - Write the condexec bits back to the CPU state
 - Advance the singlestep state machine and generate a corresponding
   exception in case of SWI/HVC/SMC
 - Write the PC back to the CPU state if it hasn't already been written
   and generate an appropriate singlestep exception otherwise

In the condition-failed instruction code path we need to:
 - Set a TCG label to jump to it if the condition is failed
 - Write the condexec bits back to the CPU state
 - Write the PC back to the CPU state since it hasn't been written in
   this case
 - Generate an appropriate singlestep exception

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1448474560-22475-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:13 +00:00
Andrew Baumann 30901475b9 target-arm: raise exception on misaligned LDREX operands
Qemu does not generally perform alignment checks. However, the ARM ARM
requires implementation of alignment exceptions for a number of cases
including LDREX, and Windows-on-ARM relies on this.

This change adds plumbing to enable alignment checks on loads using
MO_ALIGN, a do_unaligned_access hook to raise the exception (data
abort), and uses the new aligned loads in LDREX (for all but
single-byte loads).

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1449167808-5656-1-git-send-email-Andrew.Baumann@microsoft.com
[PMM: set WnR bits in syndrome and FSR as appropriate]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:13 +00:00
Peter Maydell e14f0eb12f target-arm/translate-a64.c: Correct unallocated checks for ldst_excl
The checks for the unallocated encodings in the ldst_excl group
(exclusives and load-acquire/store-release) were not correct. This
error meant that in turn we ended up with code attempting to handle
the non-existent case of "non-exclusive load-acquire/store-release
pair". Delete that broken and now unreachable code.

Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
2015-11-24 14:12:15 +00:00
Peter Maydell 6109769a8b target-arm: Don't mask out bits [47:40] in LPAE descriptors for v8
In an LPAE format descriptor in ARMv8 the address field extends
up to bit 47, not just bit 39. Correct the masking so we don't
give incorrect results if the output address size is greater
than 40 bits, as it can be for AArch64.

(Note that we don't yet support the new-in-v8 Address Size fault which
should be generated if any translation table entry or TTBR contains
an address with non-zero bits above the most significant bit of the
maximum output address size.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1448029971-9875-1-git-send-email-peter.maydell@linaro.org
2015-11-24 14:12:15 +00:00
Sergey Fedorov ce8a1b5449 target-arm: Update condexec before arch BP check in AA32 translation
Architectural breakpoint check could raise an exceptions, thus condexec
bits should be updated before calling gen_helper_check_breakpoints().

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1447767527-21268-3-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-19 12:51:08 +00:00
Sergey Fedorov 43bfa4a100 target-arm: Update condexec before CP access check in AA32 translation
Coprocessor access instructions are allowed inside IT block.
gen_helper_access_check_cp_reg() can raise an exceptions thus condexec
bits should be updated before.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1447767527-21268-2-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-19 12:11:42 +00:00
Sergey Fedorov ed6c64489e target-arm: Update PC before calling gen_helper_check_breakpoints()
PC should be updated in the CPU state before calling check_breakpoints()
helper. Otherwise, the helper would not see the correct PC in the CPU
state if it is not at the start of a TB.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1447176222-16401-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-12 16:16:02 +00:00
Sergey Fedorov 577bf80895 target-arm: Clean up DISAS_UPDATE usage in AArch32 translation code
AArch32 translation code does not distinguish between DISAS_UPDATE and
DISAS_JUMP. Thus, we cannot use any of them without first updating PC in
CPU state. Furthermore, it is too complicated to update PC in CPU state
before PC gets updated in disas context. So it is hardly possible to
correctly end TB early if is is not likely to be executed before calling
disas_*_insn(), e.g. just after calling breakpoint check helper.

Modify DISAS_UPDATE and DISAS_JUMP usage in AArch32 translation and
apply to them the same semantic as AArch64 translation does:
 - DISAS_UPDATE: update PC in CPU state when finishing translation
 - DISAS_JUMP:   preserve current PC value in CPU state when finishing
                 translation

This patch fixes a bug in AArch32 breakpoint handling: when
check_breakpoints helper does not generate an exception, ending the TB
early with DISAS_UPDATE couldn't update PC in CPU state and execution
hangs.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1447097859-586-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-10 13:37:33 +00:00
Sergey Fedorov 5c629f4ff4 target-arm: Fix gdb singlestep handling in arm_debug_excp_handler()
Do not raise a CPU exception if no CPU breakpoint has fired, since
singlestep is also done by generating a debug internal exception. This
fixes a bug with singlestepping in gdbstub.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1446726361-18328-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-10 13:37:32 +00:00
Peter Maydell 06e5cf7acd target-arm: Report S/NS status in the CPU debug logs
If this CPU supports EL3, enhance the printing of the current
CPU mode in debug logging to distinguish S from NS modes as
appropriate.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1445883178-576-3-git-send-email-peter.maydell@linaro.org
2015-11-03 13:49:42 +00:00
Peter Maydell 08b8e0f527 target-arm: Bring AArch64 debug CPU display of PSTATE into line with AArch32
The AArch64 debug CPU display of PSTATE as "PSTATE=200003c5 (flags --C-)"
on the end of the same line as the last of the general purpose registers
is unnecessarily different from the AArch32 display of PSR as
"PSR=200001d3 --C- A svc32" on its own line. Update the AArch64
code to put PSTATE in its own line and in the same format, including
printing the exception level (mode).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1445883178-576-2-git-send-email-peter.maydell@linaro.org
2015-11-03 13:49:42 +00:00
Soren Brinkmann 99a99c1fc8 target-arm: Add and use symbolic names for register banks
Add BANK_<cpumode> #defines to index banked registers.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03 13:49:41 +00:00
Richard Henderson 522a0d4e3c target-*: Advance pc after recognizing a breakpoint
Some targets already had this within their logic, but make sure
it's present for all targets.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-28 10:57:16 -07:00
Edgar E. Iglesias 9b539263fa target-arm: Add support for S1 + S2 MMU translations
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-15-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27 15:59:47 +00:00
Edgar E. Iglesias d759a457a1 target-arm: Route S2 MMU faults to EL2
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-14-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27 15:59:47 +00:00
Edgar E. Iglesias a614e69854 target-arm: Add S2 translation to 32bit S1 PTWs
Add support for applying S2 translation to 32bit S1
page-table walks.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-13-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27 15:59:47 +00:00
Edgar E. Iglesias 3778597762 target-arm: Add S2 translation to 64bit S1 PTWs
Add support for applying S2 translation to 64bit S1
page-table walks.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-12-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27 15:59:47 +00:00
Edgar E. Iglesias e14b5a23d8 target-arm: Add ARMMMUFaultInfo
Introduce ARMMMUFaultInfo to propagate MMU Fault information
across the MMU translation code path. This is in preparation for
adding Stage-2 translation.

No functional changes.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-11-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27 15:59:47 +00:00
Edgar E. Iglesias af51f566ec target-arm: Avoid inline for get_phys_addr
Avoid inline for get_phys_addr() to prepare for future recursive use.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-10-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27 15:59:47 +00:00
Edgar E. Iglesias 6ab1a5ee1c target-arm: Add support for S2 page-table protection bits
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-9-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27 15:59:47 +00:00
Edgar E. Iglesias 1853d5a9dc target-arm: Add computation of starting level for S2 PTW
The starting level for S2 pagetable walks is computed
differently from the S1 starting level. Implement the S2
variant.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-8-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27 15:59:47 +00:00
Edgar E. Iglesias 973a543482 target-arm: lpae: Rename granule_sz to stride
Rename granule_sz to stride to better match the reference manuals.

No functional change.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-7-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27 15:59:46 +00:00
Edgar E. Iglesias 4ca6a05175 target-arm: lpae: Replace tsz with computed inputsize
Remove the tsz variable and introduce inputsize.
This simplifies the code a little and makes it easier to
compare with the reference manuals.

No functional change.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-6-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27 15:59:46 +00:00
Edgar E. Iglesias 4ee3809801 target-arm: Add support for AArch32 S2 negative t0sz
Add support for AArch32 S2 negative t0sz. In preparation for
using 40bit IPAs on AArch32.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-5-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27 15:59:46 +00:00
Edgar E. Iglesias 1f4c8c18a5 target-arm: lpae: Move declaration of t0sz and t1sz
Move declaration of t0sz and t1sz to the top of the function
avoiding a mix of code and variable declarations.

No functional change.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-4-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27 15:59:46 +00:00
Edgar E. Iglesias 5c31a10d16 target-arm: lpae: Make t0sz and t1sz signed integers
Make t0sz and t1sz signed integers to match tsz and to make
it easier to implement support for AArch32 negative t0sz.
t1sz is changed for consistensy.

No functional change.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-3-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27 15:59:46 +00:00
Edgar E. Iglesias 59e0553073 target-arm: Add HPFAR_EL2
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27 15:59:46 +00:00
Soren Brinkmann b876452507 target-arm: Add support for SPSR_(ABT|UND|IRQ|FIQ)
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27 12:00:50 +00:00
Peter Maydell 541ebcd401 target-arm/translate.c: Handle non-executable page-straddling Thumb insns
When the memory we're trying to translate code from is not executable we have
to turn this into a guest fault. In order to report the correct PC for this
fault, and to make sure it is not reported until after any other possible
faults for instructions earlier in execution, we must terminate TBs at
the end of a page, in case the next instruction is in a non-executable page.
This is simple for T16, A32 and A64 instructions, which are always aligned
to their size. However T32 instructions may be 32-bits but only 16-aligned,
so they can straddle a page boundary.

Correct the condition that checks whether the next instruction will touch
the following page, to ensure that if we're 2 bytes before the boundary
and this insn is T32 then we end the TB.

Reported-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27 12:00:50 +00:00
Peter Maydell 7cd6de3bb1 target-arm: Fix "no 64-bit EL2" assumption in arm_excp_unmasked()
The code in arm_excp_unmasked() suppresses the ability of PSTATE.AIF
to mask exceptions from a lower EL targeting EL2 or EL3 if the
CPU is 64-bit. This is correct for a target of EL3, but not correct
for targeting EL2. Further, we go to some effort to calculate
scr and hcr values which are not used at all for the 64-bit CPU
case.

Rearrange the code to correctly implement the 64-bit CPU logic
and keep the hcr/scr calculations in the 32-bit CPU codepath.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1444327729-4120-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-10-27 12:00:50 +00:00
Peter Maydell 526d5809a0 * KVM page size fix for PPC
* Support for Linux 4.4's new Hyper-V features
 * Eliminate g_slice from areas I maintain
 * checkpatch fix
 * Peter's cpu_reload_memory_map() cleanups
 * More changes to MAINTAINERS
 * Require Python 2.6
 * chardev creation fixes
 * PCI requester id for ARM KVM
 * cleanups and doc fixes
 * Allow customization of the Hyper-V vendor id
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJWJKYWAAoJEL/70l94x66D2yYH/Rw06gj9FFVEhfNODmJozCsK
 zRqRREo+VMo/lIGUSwzI+OCX+yUoivxnsJXchqunK0udPuQ5vZ+mVGyKedg8/SU+
 uqXzXMK7QgJK/w7qNA1n0OacNYSosZz9MpOwPgzSLPRda8FbtVKqPBOugSEs+Ymg
 APtiumz3DGWXUmt+vqRdgdiAvoGkefPODjjPjfSQFukg205KR88tf/b9oN8Z+kDW
 LtGqG9dUNS/60ulLNQdFInn3x5WpuGky5kk57f47QHpInNcN4/CH0BiguvYNkA9A
 aFFEWj5RsK7xkhcwSw6JIaSoWoTdrQVd4mB6+WTZN4tfGIIaoDeI6fp2MFmVpZU=
 =9Tf9
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* KVM page size fix for PPC
* Support for Linux 4.4's new Hyper-V features
* Eliminate g_slice from areas I maintain
* checkpatch fix
* Peter's cpu_reload_memory_map() cleanups
* More changes to MAINTAINERS
* Require Python 2.6
* chardev creation fixes
* PCI requester id for ARM KVM
* cleanups and doc fixes
* Allow customization of the Hyper-V vendor id

# gpg: Signature made Mon 19 Oct 2015 09:13:10 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (49 commits)
  kvm: Allow the Hyper-V vendor ID to be specified
  kvm: Move x86-specific functions into target-i386/kvm.c
  kvm: Pass PCI device pointer to MSI routing functions
  hw/pci: Introduce pci_requester_id()
  kvm: Make KVM_CAP_SIGNAL_MSI globally available
  doc/rcu: fix g_free_rcu() usage example
  qemu-char: cleanup after completed conversion to cd->create
  qemu-char: convert ringbuf backend to data-driven creation
  qemu-char: convert vc backend to data-driven creation
  qemu-char: convert spice backend to data-driven creation
  qemu-char: convert console backend to data-driven creation
  qemu-char: convert stdio backend to data-driven creation
  qemu-char: convert testdev backend to data-driven creation
  qemu-char: convert braille backend to data-driven creation
  qemu-char: convert msmouse backend to data-driven creation
  qemu-char: convert mux backend to data-driven creation
  qemu-char: convert null backend to data-driven creation
  qemu-char: convert pty backend to data-driven creation
  qemu-char: convert UDP backend to data-driven creation
  qemu-char: convert socket backend to data-driven creation
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-19 10:52:39 +01:00
Pavel Fedin dc9f06ca81 kvm: Pass PCI device pointer to MSI routing functions
In-kernel ITS emulation on ARM64 will require to supply requester IDs.
These IDs can now be retrieved from the device pointer using new
pci_requester_id() function.

This patch adds pci_dev pointer to KVM GSI routing functions and makes
callers passing it.

x86 architecture does not use requester IDs, but hw/i386/kvm/pci-assign.c
also made passing PCI device pointer instead of NULL for consistency with
the rest of the code.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-Id: <ce081423ba2394a4efc30f30708fca07656bc500.1444916432.git.p.fedin@samsung.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19 10:13:07 +02:00
Sergey Fedorov 5d98bf8f38 target-arm: Fix CPU breakpoint handling
A QEMU breakpoint match is not definitely an architectural breakpoint
match. If an exception is generated unconditionally during translation,
it is hardly possible to ignore it in the debug exception handler.

Generate a call to a helper to check CPU breakpoints and raise an
exception only if any breakpoint matches architecturally.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-16 14:48:56 +01:00
Sergey Fedorov e63a2d4d9e target-arm: Fix GDB breakpoint handling
GDB breakpoints have higher priority so they have to be checked first.
Should GDB breakpoint match, just return from the debug exception
handler.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-16 14:48:56 +01:00
Sergey Fedorov 81669b8b81 target-arm: implement arm_debug_target_el()
Implement debug exception routing according to ARM ARM D2.3.1 Pseudocode
description of routing debug exceptions.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-16 13:34:02 +01:00
Sergey Fedorov 14cc7b5437 target-arm: Add MDCR_EL2
Add the MDCR_EL2 register. We don't implement any of
the debug-related traps this register controls yet, so
currently it simply reads back as written.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1444383794-16767-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message; moved non-dummy definition from
debug_cp_reginfo to el2_cp_reginfo.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-16 13:13:48 +01:00
Davorin Mista 1424ca8d43 target-arm: Implement AArch64 OSLAR/OSLSR_EL1 sysregs
Added oslar_write function to OSLAR_EL1 sysreg, using a status variable
in ARMCPUState.cp15 struct (oslsr_el1). This variable is also linked
to the newly added read-only OSLSR_EL1 register.

Linux reads from this register during its suspend/resume procedure.

Signed-off-by: Davorin Mista <davorin.mista@aggios.com>
[PMM: folded a long line and tweaked a comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-16 11:14:53 +01:00
Sergey Sorokin 2cde031f5a target-arm: Avoid calling arm_el_is_aa64() function for unimplemented EL
It is incorrect to call arm_el_is_aa64() function for unimplemented EL.
This patch fixes several attempts to do so.

Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
[PMM: Reworked several of the comments to be more verbose.]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-16 11:14:52 +01:00
Sergey Sorokin 6df99dec9e target-arm: Break the TB after ISB to execute self-modified code correctly
If any store instruction writes the code inside the same TB
after this store insn, the execution of the TB must be stopped
to execute new code correctly.
As described in ARMv8 manual D3.4.6 self-modifying code must do an
IC invalidation to be valid, and an ISB after it. So it's enough to end
the TB after ISB instruction on the code translation.
Also this TB break is necessary to take any pending interrupts immediately
after an ISB (as required by ARMv8 ARM D1.14.4).

Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
[PMM: tweaked commit message and comments slightly]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-16 11:14:52 +01:00
Stefan Weil 82c39f6a88 target-arm: Add missing 'static' attribute
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1443213733-9807-1-git-send-email-sw@weilnetz.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-16 11:14:52 +01:00
Markus Armbruster 4c315c2766 qdev: Protect device-list-properties against broken devices
Several devices don't survive object_unref(object_new(T)): they crash
or hang during cleanup, or they leave dangling pointers behind.

This breaks at least device-list-properties, because
qmp_device_list_properties() needs to create a device to find its
properties.  Broken in commit f4eb32b "qmp: show QOM properties in
device-list-properties", v2.1.  Example reproducer:

    $ qemu-system-aarch64 -nodefaults -display none -machine none -S -qmp stdio
    {"QMP": {"version": {"qemu": {"micro": 50, "minor": 4, "major": 2}, "package": ""}, "capabilities": []}}
    { "execute": "qmp_capabilities" }
    {"return": {}}
    { "execute": "device-list-properties", "arguments": { "typename": "pxa2xx-pcmcia" } }
    qemu-system-aarch64: /home/armbru/work/qemu/memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.
    Aborted (core dumped)
    [Exit 134 (SIGABRT)]

Unfortunately, I can't fix the problems in these devices right now.
Instead, add DeviceClass member cannot_destroy_with_object_finalize_yet
to mark them:

* Hang during cleanup (didn't debug, so I can't say why):
  "realview_pci", "versatile_pci".

* Dangling pointer in cpus: most CPUs, plus "allwinner-a10", "digic",
  "fsl,imx25", "fsl,imx31", "xlnx,zynqmp", because they create such
  CPUs

* Assert kvm_enabled(): "host-x86_64-cpu", host-i386-cpu",
  "host-powerpc64-cpu", "host-embedded-powerpc-cpu",
  "host-powerpc-cpu" (the powerpc ones can't currently reach the
  assertion, because the CPUs are only registered when KVM is enabled,
  but the assertion is arguably in the wrong place all the same)

Make qmp_device_list_properties() fail cleanly when the device is so
marked.  This improves device-list-properties from "crashes, hangs or
leaves dangling pointers behind" to "fails".  Not a complete fix, just
a better-than-nothing work-around.  In the above reproducer,
device-list-properties now fails with "Can't list properties of device
'pxa2xx-pcmcia'".

This also protects -device FOO,help, which uses the same machinery
since commit ef52358 "qdev-monitor: include QOM properties in -device
FOO, help output", v2.2.  Example reproducer:

    $ qemu-system-aarch64 -machine none -device pxa2xx-pcmcia,help

Before:

    qemu-system-aarch64: .../memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.

After:

    Can't list properties of device 'pxa2xx-pcmcia'

Cc: "Andreas Färber" <afaerber@suse.de>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Green <green@moxielogic.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Jia Liu <proljc@gmail.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-ppc@nongnu.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1443689999-12182-10-git-send-email-armbru@redhat.com>
2015-10-09 15:25:57 +02:00
Richard Henderson 4e5e121515 tcg: Remove gen_intermediate_code_pc
It is no longer used, so tidy up everything reached by it.
This includes the gen_opc_* arrays, the search_pc parameter
and the inline gen_intermediate_code_internal functions.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:52 +11:00
Richard Henderson bad729e272 tcg: Pass data argument to restore_state_to_opc
The gen_opc_* arrays are already redundant with the data stored in
the insn_start arguments.  Transition restore_state_to_opc to use
data from the latter.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:51 +11:00
Richard Henderson 190ce7fbc7 tcg: Add TCG_MAX_INSNS
Adjust all translators to respect it.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:50 +11:00
Richard Henderson dc03246cc3 target-*: Drop cpu_gen_code define
This symbol no longer exists.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:50 +11:00
Richard Henderson 52e971d9ff target-arm: Add condexec state to insn_start
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:46 +11:00
Richard Henderson b933066ae0 target-*: Introduce and use cpu_breakpoint_test
Reduce the boilerplate required for each target.  At the same time,
move the test for breakpoint after calling tcg_gen_insn_start.

Note that arm and aarch64 do not use cpu_breakpoint_test, but still
move the inline test down after tcg_gen_insn_start.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:28 +11:00
Richard Henderson 959082fc4a target-*: Increment num_insns immediately after tcg_gen_insn_start
This does tidy the icount test common to all targets.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:27 +11:00
Richard Henderson 667b8e29c5 target-*: Unconditionally emit tcg_gen_insn_start
While we're at it, emit the opcode adjacent to where we currently
record data for search_pc.  This puts gen_io_start et al on the
"correct" side of the marker.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:27 +11:00
Richard Henderson 765b842ade tcg: Rename debug_insn_start to insn_start
With an eye toward making it mandatory.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:26 +11:00
Peter Maydell 9e071429e6 * First batch of MAINTAINERS updates
* IOAPIC fixes (to pass kvm-unit-tests with -machine kernel_irqchip=off)
 * NBD API upgrades from Daniel
 * strtosz fixes from Marc-André
 * improved support for readonly=on on scsi-generic devices
 * new "info ioapic" and "info lapic" monitor commands
 * Peter Crosthwaite's ELF_MACHINE cleanups
 * docs patches from Thomas and Daniel
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJWBSAEAAoJEL/70l94x66DeL4H/21YR4GWCqo30f+W5kx24ZNo
 by8H2kdZmWKRr/La1JlAReki9GCP1U8Q0cYC8V885gHLKcahWS/75UKwNbw0OSyg
 2jj4uREc645TTFAvV5kQ+uAw9F/dchvkXylrVgOoUPipfmYibXY8JLu9AcVnZi6H
 X5Rvpqo4Uhp2cbRG7rYWrwgpNL+VZmKc8LDdqdlXrkjjanhuAYO2E9NBKaE+xJQQ
 FHcpkV92iSZFEZ0CB535BTIdNdDM/ae6bw1As27EF10YBTfneCQNazSeh13pLO2n
 lHit2GZr2VeTSBrPkPsItToY/Gw38duVZK4QM5/wSkHBzyeUJY0ltQrf53veYfk=
 =uc+I
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* First batch of MAINTAINERS updates
* IOAPIC fixes (to pass kvm-unit-tests with -machine kernel_irqchip=off)
* NBD API upgrades from Daniel
* strtosz fixes from Marc-André
* improved support for readonly=on on scsi-generic devices
* new "info ioapic" and "info lapic" monitor commands
* Peter Crosthwaite's ELF_MACHINE cleanups
* docs patches from Thomas and Daniel

# gpg: Signature made Fri 25 Sep 2015 11:20:52 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (52 commits)
  doc: Refresh URLs in the qemu-tech documentation
  docs: describe the QEMU build system structure / design
  typedef: add typedef for QemuOpts
  i386: interrupt poll processing
  i386: partial revert of interrupt poll fix
  ppc: Rename ELF_MACHINE to be PPC specific
  i386: Rename ELF_MACHINE to be x86 specific
  alpha: Remove ELF_MACHINE from cpu.h
  mips: Remove ELF_MACHINE from cpu.h
  sparc: Remove ELF_MACHINE from cpu.h
  s390: Remove ELF_MACHINE from cpu.h
  sh4: Remove ELF_MACHINE from cpu.h
  xtensa: Remove ELF_MACHINE from cpu.h
  tricore: Remove ELF_MACHINE from cpu.h
  or32: Remove ELF_MACHINE from cpu.h
  lm32: Remove ELF_MACHINE from cpu.h
  unicore: Remove ELF_MACHINE from cpu.h
  moxie: Remove ELF_MACHINE from cpu.h
  cris: Remove ELF_MACHINE from cpu.h
  m68k: Remove ELF_MACHINE from cpu.h
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-25 21:52:30 +01:00
Laurent Vivier 352c98e502 arm: clarify the use of muldiv64()
muldiv64() is used to convert microseconds into CPU ticks.

But it is not clear and not commented. This patch uses macro
to clearly identify what is used: time, CPU frequency and ticks.
For an elapsed time and a given frequency, we compute how many ticks
 we have.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-25 14:55:21 +02:00
Peter Crosthwaite b597c3f7da arm: Remove ELF_MACHINE from cpu.h
The only generic code relying on this is linux-user. Linux user
already has a lot of #ifdef TARGET_ customisation so instead, define
ELF_ARCH as either EM_ARM or EM_AARCH64 appropriately.

The armv7m bootloader can just pass EM_ARM directly, as that
is architecture specific code. Note that arm_boot already has its own
logic selecting an arm specific elf machine so this makes V7M more
consistent with arm_boot.

This removes another architecture specific definition from the global
namespace.

Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 12:04:43 +02:00
Pavel Fedin a7bf30342e hw/intc: Initial implementation of vGICv3
This is the initial version of KVM-accelerated GICv3 support.
State load and save are not yet supported, live migration is
not possible.

In order to get correct class name in a simpler way, gicv3_class_name()
function is implemented, similar to gic_class_name().

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Ashok kumar <ashoks@broadcom.com>
Message-id: 69d8f01d14994d7a1a140e96aef59fd332d02293.1441784344.git.p.fedin@samsung.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-24 01:29:37 +01:00
Pavel Fedin 34e85cd917 arm_kvm: Do not assume particular GIC type in kvm_arch_irqchip_create()
This allows us to use different GIC types from v2. There are no kernels
which could advertise KVM_CAP_DEVICE_CTRL without the actual ability to
create GIC with it.

GIC version probe code moved to kvm_arm_vgic_probe() which will be used
later.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Ashok kumar <ashoks@broadcom.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 015f4d9e4a8a50dfbdd734c4730558e24a69c6dc.1441784344.git.p.fedin@samsung.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-24 01:29:37 +01:00
Richard Henderson 42fedbca8f target-arm: Use new revbit functions
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-15 07:45:33 -07:00
Edgar E. Iglesias f0d574d63f target-arm: Add VMPIDR_EL2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-9-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:51 +01:00
Edgar E. Iglesias 06a7e6477c target-arm: Break out mpidr_read_val()
Break out mpidr_read_val() to allow future sharing of the
code that conditionally sets the M and U bits of MPIDR.

No functional changes.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-8-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:51 +01:00
Edgar E. Iglesias 731de9e600 target-arm: Add VPIDR_EL2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-7-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:50 +01:00
Edgar E. Iglesias 0c5fbf3b4c target-arm: Suppress EPD for S2, EL2 and EL3 translations
Stage-2 translations, EL2 and EL3 regimes don't have the
EPD control.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-6-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:50 +01:00
Edgar E. Iglesias 1edee4708a target-arm: Suppress TBI for S2 translations
Stage-2 MMU translations do not have configurable TBI as
the top byte is always 0 (48-bit IPAs).

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-5-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:50 +01:00
Edgar E. Iglesias b698e9cfd2 target-arm: Add VTTBR_EL2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-4-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:50 +01:00
Edgar E. Iglesias 68e9c2fe65 target-arm: Add VTCR_EL2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-3-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed typo in comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:50 +01:00
Richard Henderson 7cb36e18b2 target-arm: Use tcg_gen_extrh_i64_i32
Usually, eliminate an operation from the translator by combining
a shift with an extract.

In the case of gen_set_NZ64, we don't need a boolean value for cpu_ZF,
merely a non-zero value.  Given that we can extract both halves of a
64-bit input in one call, this simplifies the code.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-12-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:49 +01:00
Richard Henderson 8fb0ad8e16 target-arm: Recognize ROR
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-11-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:49 +01:00
Richard Henderson d3a77b42de target-arm: Eliminate unnecessary zero-extend in disas_bitfield
For !SF, this initial ext32u can't be optimized away by the
current TCG code generator.  (It would require backward bit
liveness propagation.)

But since the range of bits for !SF are already constrained by
unallocated_encoding, we'll never reference the high bits anyway.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-10-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:48 +01:00
Richard Henderson 9924e85829 target-arm: Recognize UXTB, UXTH, LSR, LSL
These are all special case aliases of UBFM.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-9-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:48 +01:00
Richard Henderson ef60151bee target-arm: Recognize SXTB, SXTH, SXTW, ASR
These are all special case aliases of SBFM.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-8-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:48 +01:00
Richard Henderson 6e061029d7 target-arm: Implement fcsel with movcond
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-7-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:48 +01:00
Richard Henderson 7dd03d773e target-arm: Implement ccmp branchless
This can allow much of a ccmp to be elided when particular
flags are subsequently dead.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-6-git-send-email-rth@twiddle.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:48 +01:00
Richard Henderson 259cb68491 target-arm: Use setcond and movcond for csel
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-5-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:47 +01:00
Richard Henderson 9305eac09e target-arm: Handle always condition codes within arm_test_cc
Handling this with TCG_COND_ALWAYS will allow these unlikely
cases to be handled without special cases in the rest of the
translator.  The TCG optimizer ought to be able to reduce
these ALWAYS conditions completely.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-4-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:47 +01:00
Richard Henderson 6c2c63d3a0 target-arm: Introduce DisasCompare
Split arm_gen_test_cc into 3 functions, so that it can be reused
for non-branch TCG comparisons.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-3-git-send-email-rth@twiddle.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:47 +01:00
Richard Henderson 78bcaa3e37 target-arm: Share all common TCG temporaries
This is a bug fix for aarch64.  At present, we have branches using
the 32-bit (translate.c) versions of cpu_[NZCV]F, but we set the flags
using the 64-bit (translate-a64.c) versions of cpu_[NZCV]F.  From
the view of the TCG code generator, these are unrelated variables.

The bug is hard to see because we currently only read these variables
from branches, and upon reaching a branch TCG will first spill live
variables and then reload the arguments of the branch.  Since the
32-bit versions were never live until reaching the branch, we'd re-read
the data that had just been spilled from the 64-bit versions.

There is currently no such problem with the cpu_exclusive_* variables,
but there's no point in tempting fate.

Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-2-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:47 +01:00
Benjamin Herrenschmidt 97ed5ccdee tlb: Add "ifetch" argument to cpu_mmu_index()
This is set to true when the index is for an instruction fetch
translation.

The core get_page_addr_code() sets it, as do the SOFTMMU_CODE_ACCESS
acessors.

All targets ignore it for now, and all other callers pass "false".

This will allow targets who wish to split the mmu index between
instruction and data accesses to do so. A subsequent patch will
do just that for PowerPC.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Message-Id: <1439796853-4410-2-git-send-email-benh@kernel.crashing.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-11 08:15:28 -07:00
Veres Lajos 67cc32ebfd typofixes - v4
Signed-off-by: Veres Lajos <vlajos@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11 10:45:43 +03:00
Daniel P. Berrange b6af097528 maint: remove / fix many doubled words
Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11 10:21:38 +03:00
Edgar E. Iglesias c96fc9b52d target-arm: Add AArch64 access to PAR_EL1
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1441311266-8644-4-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-08 17:38:44 +01:00
Edgar E. Iglesias 7a379c7e68 target-arm: Correct opc1 for AT_S12Exx
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1441311266-8644-3-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-08 17:38:44 +01:00
Edgar E. Iglesias dbc29a868c target-arm: Log the target EL when taking exceptions
Log the target EL when taking exceptions. This is useful when
debugging guest SW or QEMU itself while transitioning through
the various ELs.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1441311266-8644-2-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-08 17:38:44 +01:00
Sergey Sorokin cef9ee7067 target-arm: Fix default_exception_el() function for the case when EL3 is not supported
If EL3 is not supported in current configuration,
we should not try to get EL3 bitness.

Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-id: 1441208342-10601-2-git-send-email-afarallax@yandex.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-08 17:38:44 +01:00
Pavel Fedin 0f4a9e45ec target-arm: Refactor CPU affinity handling
Introduces reusable definitions for CPU affinity masks/shifts and gets rid
of hardcoded magic numbers.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-id: 7e6def4d0d91ae64615cdd2035b94d408d0a23c6.1441366248.git.p.fedin@samsung.com
[PMM: folded overlong line]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:31 +01:00
Sergey Sorokin 771842585f target-arm: Fix arm_excp_unmasked() function
There is an error in arm_excp_unmasked() function:
bitwise operator & is used with integer and bool operands
causing an incorrect zeroed result.
The patch fixes it.

Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-id: 1441209238-16881-1-git-send-email-afarallax@yandex.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:30 +01:00
Sergey Sorokin 3a9148d0bd target-arm: Fix AArch32:AArch64 general-purpose register mapping
There is an error in functions aarch64_sync_32_to_64() and
aarch64_sync_64_to_32() with mapping of registers between AArch32 and
AArch64.  This commit fixes the mapping to match the v8 ARM ARM
section D1.20.1 (table D1-77).

Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-id: 1440796451-15276-1-git-send-email-afarallax@yandex.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tidied commit message a bit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:29 +01:00
Peter Crosthwaite 8f6fd322f6 arm: Remove hw_error() usages.
All of these hw_errors are fatal and indicate something wrong with
QEMU implementation.

Convert to g_assert_not_reached.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 169194d09017e5725535d31a1507d454c0043706.1440842587.git.crosthwaite.peter@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:29 +01:00
Peter Crosthwaite f128bf297b arm: cpu: assert() on no-EL2 virt IRQ error condition.
Replace the hw_error() for no-EL2 VIRQ with an assert.

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 93b6acdee6cafe8ff0422a294a5640c3d35f0e17.1440842587.git.crosthwaite.peter@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:29 +01:00
Peter Maydell 8012c84ff9 target-arm: Wire up HLT 0xf000 as the A64 semihosting instruction
For the A64 instruction set, the semihosting call instruction
is 'HLT 0xf000'. Wire this up to call do_arm_semihosting()
if semihosting is enabled.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christopher Covington <christopher.covington@linaro.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-10-git-send-email-peter.maydell@linaro.org
2015-09-07 10:39:28 +01:00
Peter Maydell 7446d35e1d target-arm/arm-semi.c: SYS_EXIT on A64 takes a parameter block
The A64 semihosting API changes the interface for SYS_EXIT so
that instead of taking a single exception type in a register,
it takes a parameter block containing the exception type and
a sub-code. Implement this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-9-git-send-email-peter.maydell@linaro.org
2015-09-07 10:39:28 +01:00
Peter Maydell e9ebfbfcf3 target-arm/arm-semi.c: Implement A64 specific SyncCacheRange call
The A64 semihosting ABI defines a new call SyncCacheRange
for doing a 'clean D-cache and invalidate I-cache' sequence.
Since QEMU doesn't implement caches, we can implement this as a nop.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christopher Covington <christopher.covington@linaro.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-8-git-send-email-peter.maydell@linaro.org
2015-09-07 10:39:28 +01:00
Peter Maydell faacc04161 target-arm/arm-semi.c: Support widening APIs to 64 bits
The 64-bit A64 semihosting API has some pervasive changes from
the 32-bit version:
 * all parameter blocks are arrays of 64-bit values, not 32-bit
 * the semihosting call number is passed in W0
 * the return value is a 64-bit value in X0

Implement the necessary handling for this widening.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christopher Covington <christopher.covington@linaro.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-7-git-send-email-peter.maydell@linaro.org
2015-09-07 10:39:28 +01:00
Peter Maydell bb19cbc95a target-arm/arm-semi.c: Factor out repeated 'return env->regs[0]'
Factor out a repeated pattern in the semihosting code:

    gdb_do_syscall(arm_semi_cb, "system,%s", arg0, (int)arg1+1);
    /* arm_semi_cb sets env->regs[0] to the syscall return value */
    return env->regs[0];

For A64 the return value will go in a different register; pull
the sequence out into its own function that passes the return
value in a static variable rather than overloading regs[0]
for the purpose, so the code will work on both A32/T32 and A64.

Note that the lack-of-synchronization bug noted in the FIXME
comment is not introduced by this commit, but was already present.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christopher Covington <christopher.covington@linaro.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-5-git-send-email-peter.maydell@linaro.org
2015-09-07 10:39:27 +01:00
Christopher Covington 205ace55ff target-arm: Improve semihosting debug prints
Print semihosting debugging information before the
do_arm_semihosting() call so that angel_SWIreason_ReportException,
which causes the function to not return, gets the same debug prints as
other semihosting calls. Also print out the semihosting call number.

Signed-off-by: Christopher Covington <christopher.covington@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-3-git-send-email-peter.maydell@linaro.org
2015-09-07 10:39:27 +01:00
Peter Maydell 857b55adb7 target-arm/arm-semi.c: Fix broken SYS_WRITE0 via gdb
A spurious trailing "\n" in the gdb syscall format string used
for SYS_WRITE0 meant that gdb would reject the remote syscall,
with the effect that the output from the guest was silently dropped.
Remove the newline so that gdb accepts the packet.

Cc: qemu-stable@nongnu.org

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:27 +01:00
Peter Maydell cea66e9121 target-arm: Implement AArch64 TLBI operations on IPAs
Implement the AArch64 TLBI operations which take an intermediate
physical address and invalidate stage 2 translations.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-7-git-send-email-peter.maydell@linaro.org
2015-08-25 16:18:33 +01:00
Peter Maydell 43efaa33fa target-arm: Implement missing EL3 TLB invalidate operations
Implement the remaining stage 1 TLB invalidate operations
visible from EL3.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-6-git-send-email-peter.maydell@linaro.org
2015-08-25 16:18:33 +01:00
Peter Maydell 2bfb9d75d3 target-arm: Implement missing EL2 TLBI operations
Implement the missing TLBI operations that exist only
if EL2 is implemented.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-5-git-send-email-peter.maydell@linaro.org
2015-08-25 16:18:33 +01:00
Peter Maydell fd3ed96922 target-arm: Restrict AArch64 TLB flushes to the MMU indexes they must touch
Now we have the ability to flush the TLB only for specific MMU indexes,
update the AArch64 TLB maintenance instruction implementations to only
flush the parts of the TLB they need to, rather than doing full flushes.

We take the opportunity to remove some duplicate functions (the per-asid
tlb ops work like the non-per-asid ones because we don't support
flushing a TLB only by ASID) and to bring the function names in line
with the architectural TLBI operation names.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-4-git-send-email-peter.maydell@linaro.org
2015-08-25 16:18:33 +01:00
Peter Maydell 83ddf97577 target-arm: Move TLBI ALLE1/ALLE1IS definitions into numeric order
Move the two regdefs for TLBI ALLE1 and TLBI ALLE1IS down so that the
whole set of AArch64 TLBI regdefs is arranged in numeric order.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-3-git-send-email-peter.maydell@linaro.org
2015-08-25 16:18:33 +01:00
Peter Maydell 14db7fe09a target-arm: Implement AArch32 ATS1H* operations
Implement the AArch32 ATS1H* operations which perform
Hyp mode stage 1 translations.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1437751263-21913-6-git-send-email-peter.maydell@linaro.org
2015-08-25 15:45:08 +01:00
Peter Maydell 87562e4f4a target-arm: Enable the AArch32 ATS12NSO ops
Apply the correct conditions in the ats_access() function for
the ATS12NSO* address translation operations:
 * succeed at EL2 or EL3
 * normal UNDEF trap from NS EL1
 * trap to EL3 from S EL1 (only possible if EL3 is AArch64)

(This change means they're now available in our EL3-supporting
CPUs when they would previously always UNDEF.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1437751263-21913-5-git-send-email-peter.maydell@linaro.org
2015-08-25 15:45:08 +01:00
Peter Maydell e76157264d target-arm: Add CP_ACCESS_TRAP_UNCATEGORIZED_EL2, 3
Some coprocessor register access functions need to be able
to report "trap to EL3 with an 'uncategorized' syndrome";
add the necessary CPAccessResult enum and handling for it.

I don't currently know of any registers that need to trap
to EL2 with the 'uncategorized' syndrome, but adding the
_EL2 enum as well is trivial and fills in what would
otherwise be an odd gap in the handling.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1437751263-21913-4-git-send-email-peter.maydell@linaro.org
2015-08-25 15:45:08 +01:00
Peter Maydell 2a47df9532 target-arm: Wire up AArch64 EL2 and EL3 address translation ops
Wire up the AArch64 EL2 and EL3 address translation operations
(AT S12E1*, AT S12E0*, AT S1E2*, AT S1E3*), and correct some
errors in the ats_write64() function in previously unused code
that would have done the wrong kind of lookup for accesses from
EL3 when SCR.NS==0.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1437751263-21913-3-git-send-email-peter.maydell@linaro.org
2015-08-25 15:45:08 +01:00
Peter Maydell d0a2cbceb2 target-arm: there is no TTBR1 for 32-bit EL2 stage 1 translations
For EL2 stage 1 translations, there is no TTBR1. We were already
handling this for 64-bit EL2; add the code to take the 'no TTBR1'
code path for 64-bit EL2 as well.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1437751263-21913-2-git-send-email-peter.maydell@linaro.org
2015-08-25 15:45:08 +01:00
Peter Maydell 834a6c6920 target-arm: Implement missing ACTLR registers
We already implemented ACTLR_EL1; add the missing ACTLR_EL2 and
ACTLR_EL3, for consistency.

Since we don't currently have any CPUs that need the EL2/EL3
versions to reset to non-zero values, implement as RAZ/WI.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1438281398-18746-5-git-send-email-peter.maydell@linaro.org
2015-08-25 15:45:07 +01:00
Peter Maydell 37cd6c2478 target-arm: Implement missing AFSR registers
The AFSR registers are implementation dependent auxiliary fault
status registers. We already implemented a RAZ/WI AFSR0_EL1 and
AFSR_EL1; add the missing AFSR{0,1}_EL{2,3} for consistency.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1438281398-18746-4-git-send-email-peter.maydell@linaro.org
2015-08-25 15:45:07 +01:00
Peter Maydell 2179ef958c target-arm: Implement missing AMAIR registers
The AMAIR registers are for providing auxiliary implementation
defined memory attributes. We already implemented a RAZ/WI
AMAIR_EL1; add the EL2 and EL3 versions for consistency.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1438281398-18746-3-git-send-email-peter.maydell@linaro.org
2015-08-25 15:45:07 +01:00
Peter Maydell 4cfb8ad896 target-arm: Add missing MAIR_EL3 and TPIDR_EL3 registers
Add the AArch64 registers MAIR_EL3 and TPIDR_EL3, which are the only
two which we had implemented the 32-bit Secure equivalents of but
not the 64-bit Secure versions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1438281398-18746-2-git-send-email-peter.maydell@linaro.org
2015-08-25 15:45:07 +01:00
Richard Henderson ecc7b3aa71 tcg: Remove tcg_gen_trunc_i64_i32
Replacing it with tcg_gen_extrl_i64_i32.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24 11:10:54 -07:00
Peter Maydell 9ff9dd3c87 target-arm: Add AArch32 banked register access to secure physical timer
If EL3 is AArch32, then the secure physical timer is accessed via
banking of the registers used for the non-secure physical timer.
Implement this banking.

Note that the access controls for the AArch32 banked registers
remain the same as the physical-timer checks; they are not the
same as the controls on the AArch64 secure timer registers.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1437047249-2357-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-08-13 11:26:22 +01:00
Peter Maydell b4d3978c2f target-arm: Add the AArch64 view of the Secure physical timer
On CPUs with EL3, there are two physical timers, one for Secure and one
for Non-secure. Implement this extra timer and the AArch64 registers
which access it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1437047249-2357-2-git-send-email-peter.maydell@linaro.org
2015-08-13 11:26:22 +01:00
Peter Maydell 49a661910c target-arm: Add debug check for mismatched cpreg resets
It's easy to accidentally define two cpregs which both try
to reset the same underlying state field (for instance a
clash between an AArch64 EL3 definition and an AArch32
banked register definition). if the two definitions disagree
about the reset value then the result is dependent on which
one happened to be reached last in the hashtable enumeration.

Add a consistency check to detect and assert in these cases:
after reset, we run a second pass where we check that the
reset operation doesn't change the value of the register.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1436797559-20835-1-git-send-email-peter.maydell@linaro.org
2015-08-13 11:26:21 +01:00
Pavel Fedin e6fbcbc4e5 Introduce gic_class_name() instead of repeating condition
This small inline returns correct GIC class name depending on whether we
use KVM acceleration or not. Avoids duplicating the condition everywhere.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 4f26901be9b844b563673ce3ad08eeedbb7a7132.1438758065.git.p.fedin@samsung.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13 11:26:21 +01:00
Edgar E. Iglesias b0e66d95e4 target-arm: Add the Hypervisor timer
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1436791864-4582-6-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13 11:26:18 +01:00
Edgar E. Iglesias 0e3eca4c26 target-arm: Pass timeridx as argument to various timer functions
Prepare for adding the Hypervisor timer, no functional change.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1436791864-4582-5-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13 11:26:18 +01:00
Edgar E. Iglesias d57b9ee84f target-arm: Rename and move gt_cnt_reset
Rename gt_cnt_reset to gt_timer_reset as the function really
resets the timers and not the counters. Move the registration
from counter regs to timer regs.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1436791864-4582-4-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13 11:26:18 +01:00
Edgar E. Iglesias 0b6440afb8 target-arm: Add CNTHCTL_EL2
Adds control for trapping selected timer and counter accesses to EL2.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1436791864-4582-3-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13 11:26:18 +01:00
Edgar E. Iglesias edac4d8a16 target-arm: Add CNTVOFF_EL2
Adds support for the virtual timer offset controlled by EL2.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1436791864-4582-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13 11:26:17 +01:00
Christoffer Dall 4b7a6bf402 target-arm: kvm: Differentiate registers based on write-back levels
Some registers like the CNTVCT register should only be written to the
kernel as part of machine initialization or on vmload operations, but
never during runtime, as this can potentially make time go backwards or
create inconsistent time observations between VCPUs.

Introduce a list of registers that should not be written back at runtime
and check this list on syncing the register state to the KVM state.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1437046488-10773-1-git-send-email-christoffer.dall@linaro.org
[PMM: tweaked a few comments, added the new argument to the stub
 write_list_to_kvmstate() in target-arm/kvm-stub.c]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-21 11:18:45 +01:00
Peter Maydell e46e1a74ef target-arm: Fix broken SCTLR_EL3 reset
The SCTLR_EL3 cpreg definition was implicitly resetting the
register state to 0, which is both wrong and clashes with
the reset done via the SCTLR definition (since sctlr[3]
is unioned with sctlr_s). This went unnoticed until recently,
when an unrelated change (commit a903c449b4) happened to
perturb the order of enumeration through the cpregs hashtable for
reset such that the erroneous reset happened after the correct one
rather than before it. Fix this by marking SCTLR_EL3 as an alias,
so its reset is left up to the AArch32 view.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-07-15 17:16:26 +01:00
Peter Crosthwaite 484406200e disas: arm: QOMify target specific disas setup
Move the target_disas() ARM specifics to the QOM disas_set_info hook
and delete the ARM specific code in disas.c.

This has the extra advantage of the more fully featured target_disas()
implementation now applying to monitor_disas().

Currently, target_disas() has multi-endian, thumb and AArch64
support whereas the existing monitor_disas() support only has vanilla
AA32 support.

E.G. Running an AA64 linux kernel the following -d in_asm disas happens
(taget_disas()):

IN:
0x0000000040000000:  580000c0      ldr x0, pc+24 (addr 0x40000018)
0x0000000040000004:  aa1f03e1      mov x1, xzr

However before this patch, disasing the same from the monitor:

(qemu) xp/i 0x40000000
0x0000000040000000:  580000c0      stmdapl  r0, {r6, r7}

After this patch:
(qemu) xp/i 0x40000000
0x0000000040000000:  580000c0      ldr x0, pc+24 (addr 0x40000018)

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09 15:20:41 +02:00
Peter Crosthwaite ea3e984740 cpu-exec: Purge all uses of ENV_GET_CPU()
Remove un-needed usages of ENV_GET_CPU() by converting the APIs to use
CPUState pointers and retrieving the env_ptr as minimally needed.

Scripted conversion for target-* change:

for I in target-*/cpu.h; do
    sed -i \
    's/\(^int cpu_[^_]*_exec(\)[^ ][^ ]* \*s);$/\1CPUState *cpu);/' \
    $I;
done

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09 15:20:40 +02:00
Peter Crosthwaite 4bad9e392e cpu: Change cpu_exec_init() arg to cpu, not env
The callers (most of them in target-foo/cpu.c) to this function all
have the cpu pointer handy. Just pass it to avoid an ENV_GET_CPU() from
core code (in exec.c).

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Anthony Green <green@moxielogic.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09 15:20:40 +02:00
Bharata B Rao 5a790cc4b9 cpu: Add Error argument to cpu_exec_init()
Add an Error argument to cpu_exec_init() to let users collect the
error. This is in preparation to change the CPU enumeration logic
in cpu_exec_init(). With the new enumeration logic, cpu_exec_init()
can fail if cpu_index values corresponding to max_cpus have already
been handed out.

Since all current callers of cpu_exec_init() are from instance_init,
use error_abort Error argument to abort in case of an error.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09 15:20:40 +02:00
Daniel P. Berrange 6f2945cde6 crypto: move built-in AES implementation into crypto/
To prepare for a generic internal cipher API, move the
built-in AES implementation into the crypto/ directory

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-3-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-07 12:04:13 +02:00
Peter Maydell c87e5a61c2 target-arm: Implement YIELD insn to yield in ARM and Thumb translators
Implement the YIELD instruction in the ARM and Thumb translators to
actually yield control back to the top level loop rather than being
a simple no-op. (We already do this for A64.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1435672316-3311-3-git-send-email-peter.maydell@linaro.org
2015-07-06 10:05:44 +01:00
Peter Maydell 049e24a191 target-arm: Split DISAS_YIELD from DISAS_WFE
Currently we use DISAS_WFE for both WFE and YIELD instructions.
This is functionally correct because at the moment both of them
are implemented as "yield this CPU back to the top level loop so
another CPU has a chance to run". However it's rather confusing
that YIELD ends up calling HELPER(wfe), and if we ever want to
implement real behaviour for WFE and SEV it's likely to trip us up.

Split out the yield codepath to use DISAS_YIELD and a new
HELPER(yield) function, and have HELPER(wfe) call HELPER(yield).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1435672316-3311-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2015-07-06 10:05:44 +01:00
Sergey Fedorov 2a6332d968 target-arm: fix write helper for TLBI ALLE1IS
TLBI ALLE1IS is an operation that does invalidate TLB entries on all PEs
in the same Inner Sharable domain, not just on the current CPU. So we
must use tlbiall_is_write() here.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1435676538-31345-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-06 10:05:43 +01:00
Soren Brinkmann b21ab1fc21 target-arm: A64: Print ELR when taking exceptions
When taking an exception print the content of the exception link
register. This is useful especially for synchronous exceptions because
in that case this registers holds the address of the instruction that
generated the exception.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Message-id: 1435036655-16132-1-git-send-email-soren.brinkmann@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-26 14:22:36 +01:00
Liviu Ionescu f3c2bda216 target-arm: default empty semihosting cmdline
If neither explicit semihosting args nor -kernel are used,
make SYS_GET_CMDLINE return an empty string.

Signed-off-by: Liviu Ionescu <ilg@livius.net>
Message-id: AC7B5AFC-06AE-4FAD-9852-B65708E80E09@livius.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-26 14:22:36 +01:00
Markus Armbruster cc7a8ea740 Include qapi/qmp/qerror.h exactly where needed
In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:41 +02:00
Peter Crosthwaite d49190c420 disas: Remove uses of CPU env
disas does not need to access the CPU env for any reason. Change the
APIs to accept CPU pointers instead. Small change pattern needs to be
applied to all target translate.c. This brings us closer to making
disas.o a common-obj and less architecture specific in general.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22 17:40:01 +02:00
Leon Alrae a59d31a1eb semihosting: add --semihosting-config arg sub-argument
Add new "arg" sub-argument to the --semihosting-config allowing the user
to pass multiple input arguments separately. It is required for example
by UHI semihosting to construct argc and argv.

Also, update ARM semihosting to support new option (at the moment it is
the only target which cares about arguments).

If the semihosting is enabled and no semihosting args have been specified,
then fall back to -kernel/-append. The -append string is split on whitespace
before initializing semihosting.argv[1..n]; this is different from what
QEMU MIPS machines' pseudo-bootloaders do (i.e. argv[1] contains the whole
-append), but is more intuitive from UHI user's point of view and Linux
kernel just does not care as it concatenates argv[1..n] into single cmdline
string anyway.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Message-id: 1434643256-16858-3-git-send-email-leon.alrae@imgtec.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 14:17:45 +01:00
Leon Alrae cfe67cef48 semihosting: create SemihostingConfig structure and semihost.h
Remove semihosting_enabled and semihosting_target and replace them with
SemihostingConfig structure containing equivalent fields. The structure
is defined in vl.c where it is actually set.

Also introduce separate header file include/exec/semihost.h allowing to
access semihosting config related stuff from target specific semihosting
code.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1434643256-16858-2-git-send-email-leon.alrae@imgtec.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 14:17:45 +01:00
Peter Crosthwaite d6a6b13ea1 target-arm: Add support for Cortex-R5
Introduce a CPU model for the Cortex R5 processor. ARMv7 with MPU,
and both thumb and ARM div instructions.

Also implement dummy ATCM and BTCM. These CPs are defined for R5 but
don't have a lot of meaning in QEMU yet. Raz them so the guest can
proceed if they are read. The TCM registers will return a size of 0,
indicating no TCM.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: efe213163e6800578494aba864ac30329de4d396.1434501320.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 14:17:45 +01:00
Peter Crosthwaite f6bda88ff8 target-arm: Implement PMSAv7 MPU
Unified MPU only. Uses ARM architecture major revision to switch
between PMSAv5 and v7 when ARM_FEATURE_MPU is set. PMSA v6 remains
unsupported and is asserted against.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: dcb03cda6dd754c5cc6a962fa11f25089811e954.1434501320.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 14:17:45 +01:00
Peter Crosthwaite 6cb0b013a1 target-arm: Add registers for PMSAv7
Define the arm CP registers for PMSAv7 and their accessor functions.
RGNR serves as a shared index that indexes into arrays storing the
DRBAR, DRSR and DRACR registers. DRBAR and friends have to be VMSDd
separately from the CP interface using a new PMSA specific VMSD
subsection.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 172cf135fbd8f5cea413c00e71cc1c3cac704744.1434501320.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 14:17:44 +01:00
Peter Crosthwaite 3281af8114 target-arm/helper.c: define MPUIR register
Define the MPUIR register for MPU supporting ARMv6 and onwards.
Currently we only support unified MPU.

The size of the unified MPU is defined via the number of "dregions".
So just a single config is added to specify this size. (When split MPU
is implemented we will add an extra iregions config).

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 9f248950b803a08c8b3c978931663182f7e882e7.1434501320.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 14:17:44 +01:00
Sergey Fedorov b061a82b8a target-arm: Do not reset sysregs marked as ALIAS
cp_reg_reset() is called from g_hash_table_foreach() which does not
define a specific ordering of the hash table iteration. Thus doing reset
for registers marked as ALIAS would give an ambiguous result when
resetvalue is different for original and alias registers. Exit
cp_reg_reset() early when passed an alias register. Then clean up alias
register definitions from needless resetvalue and resetfn.

In particular, this fixes a bug in the handling of the PMCR register,
which had different resetvalues for its 32 and 64-bit views.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1434554713-10220-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 14:17:44 +01:00
Aurelio C. Remonda ba890a9b25 target-arm: Add the Cortex-M4 CPU
This patch adds the Cortex-M4 CPU. The M4 is basically the same as
the M3, the main differences being the DSP instructions and an
optional FPU.  Only no-FPU cortex-M4 is implemented here, cortex-M4F
is not because the core target-arm code doesn't support the M-profile
FPU model yet.

Signed-off-by: Aurelio C. Remonda <aurelioremonda@gmail.com>
Message-id: 1434461850-4104-1-git-send-email-aurelioremonda@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 14:17:44 +01:00
Peter Maydell 3977ee5d7a target-arm: Correct "preferred return address" for cpreg access exceptions
The architecture defines that when taking an exception trying to
access a coprocessor register, the "preferred return address" for
the exception is the address of the instruction that caused the
exception. Correct an off-by-4 error which meant we were returning
the address after the instruction for traps which happened because
of a failure of a runtime access-check function on an AArch32
register. (Traps caused by translate-time checkable permissions
failures had the correct address, as did traps on AArch64 registers.)

This fixes https://bugs.launchpad.net/qemu/+bug/1463338

Reported-by: Robert Buhren <robert@robertbuhren.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1433861440-30133-1-git-send-email-peter.maydell@linaro.org
2015-06-15 18:06:11 +01:00
Peter Crosthwaite 13689d4364 arm: helper: rename get_phys_addr_mpu
This get_phys_addr is really for pmsav5. Rename it accordingly.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: bf4b019aa87d682a45998105ef8e4d4e97a5e117.1434066412.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 18:06:10 +01:00
Peter Crosthwaite 8f325f568f arm: Add has-mpu property
For processors that support MPUs, add a property to de-feature it. This
is similar to the implementation of the EL3 feature.

The processor definition in init sets ARM_FEATURE_MPU if it can support
an MPU. post_init exposes the property, defaulting to true. If cleared
by the instantiator, ARM_FEATURE_MPU is then removed at realize time.

This is to support R profile processors that may or may-not have an MPU
configured.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 632918cc48786e868ea18aa6bd12f70597994cad.1434066412.git.peter.crosthwaite@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 18:06:10 +01:00
Peter Crosthwaite a8e81b319d arm: Implement uniprocessor with MP config
Add a boolean for indicating uniprocessors with MP extensions. This
drives the U bit in MPIDR. Prepares support for Cortex-R5.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a70a80583df265e0174f01fa1fc92b33ea6d1db5.1434066412.git.peter.crosthwaite@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 18:06:10 +01:00
Peter Crosthwaite b7cc4e82f0 arm: Refactor get_phys_addr FSR return mechanism
Currently, the return code for get_phys_addr is overloaded for both
success/fail and FSR value return. This doesn't handle the case where
there is an error with a 0 FSR. This case exists in PMSAv7.

So rework get_phys_addr and friends to return a success/failure boolean
return code and populate the FSR via a caller provided uint32_t
pointer.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a209e3d8ae00cda55260c970891f520210e26bad.1434066412.git.peter.crosthwaite@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 18:06:10 +01:00
Peter Crosthwaite 8e5d75c950 arm: helper: Factor out CP regs common to [pv]msa
V6+ PMSA and VMSA share some common registers that are currently
in the VMSA definition block. Split them out into a new def that can
be shared to PMSA.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 284db78a43c63c9bfbb60de539672c361bcb6af8.1434066412.git.peter.crosthwaite@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 18:06:10 +01:00
Peter Crosthwaite 5e5cf9e35f arm: Don't add v7mp registers in MPU systems
These registers are VMSA specific so they should be conditional on
VMSA (i.e. !MPU).

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 7bb8843e45f2635c6b7a583c5bb5da51ed4442a0.1434066412.git.peter.crosthwaite@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 18:06:10 +01:00
Peter Crosthwaite 8085ce63c5 arm: Do not define TLBTR in PMSA systems
If doing a PMSA (MPU) system do not define the VMSA specific TLBTR CP.
The def is done separately from VMSA registers group as it is affected
by both the OMAP/STRONGARM RW errata and the MIDR backgrounding.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: b03fea3840207edf633f5c9189400c3dd6a28d14.1434066412.git.peter.crosthwaite@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 18:06:10 +01:00
Aurelio C. Remonda 62b44f059a target-arm: Add the THUMB_DSP feature
Create an ARM_FEATURE_THUMB_DSP controlling the Thumb encodings of
the 85 DSP instructions (these are all Thumb2). This is enabled for
all non-M-profile CPUs with Thumb2 support, as the instructions are
mandatory for R and A profiles. On M profile they are optional and
not present in the Cortex-M3 (though they are in the M4).

The effect of this commit is that we will now treat the DSP
encodings as illegal instructions on M3, when previously we
incorrectly implemented them.

Signed-off-by: Aurelio C. Remonda <aurelioremonda@gmail.com>
Message-id: 1434311355-26554-1-git-send-email-aurelioremonda@gmail.com
[PMM: added clz/crc32/crc32c and default case to the early-decode switch;
 minor format/spacing fixups; reworded commit message a bit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 18:06:09 +01:00
Pavel Fedin eb5e1d3c85 target-arm: Use the kernel's idea of MPIDR if we're using KVM
When we're using KVM, the kernel's internal idea of the MPIDR
affinity fields must match the values we tell it for the guest
vcpu cluster configuration in the device tree. Since at the moment
the kernel doesn't support letting userspace tell it the correct
affinity fields to use, we must read the kernel's view and
reflect that back in the device tree.

Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com>
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-id: 02f601d0a1e6$90c7d630$b2578290$@samsung.com
[PMM: Use a local #define rather than a global variable for
 the TCG ARM_CPUS_PER_CLUSTER setting. Tweak a comment. Update the
 commit message.]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 18:06:09 +01:00
Sergey Fedorov ac00c79ff6 target-arm: add AArch32 MIDR aliases in ARMv8
According to ARMv8 ARM, there are additional aliases to MIDR system register in
AArch32 state. So add them to the list.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1433321048-23793-3-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 18:06:08 +01:00
Sergey Fedorov 13b72b2b9a target-arm: Fix REVIDR reset value
According to ARM Cortex-A53/A57 TRM, REVIDR reset value should be zero. So let
REVIDR reset value be specified by CPU model and correct it for Cortex-A53/A57.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1433321048-23793-2-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 18:06:08 +01:00
Shannon Zhao 7525465e6d target-arm/kvm64: Add cortex-a53 cpu support
Since commit e353102(target-arm: cpu64: Add support for Cortex-A53) has
added Cortex-A53 cpu support for target-arm, this patch just enables it
for kvm-arm.

Here adding XGENE_POTENZA just makes the enum continuous.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1433207452-4512-2-git-send-email-shannon.zhao@linaro.org
[PMM: Don't add the CPU types to cpus_to_try[]; this array only
 lists old CPUs which were supported in pre-PREFERRED_TARGET kernels]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 18:06:08 +01:00
Alex Bennée a79e0218e0 target-arm/cpu.h: remove pending_exception
This isn't used by any of the code. In fact it looks like it was never
used as it came in with ARMv7 support.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1434020015-8868-1-git-send-email-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 18:06:08 +01:00
Sergey Fedorov 4e42a6ca37 target-arm: use extended address bits from supersection short descriptor
Since ARMv7 with LPAE support, a supersection short translation table
descriptor has had extended base address fields which hold bits 39:32 of
translated address. These fields are IMPDEF in ARMv6 and ARMv7 without
LPAE support.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1433235718-30485-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 18:06:07 +01:00
Peter Maydell fc1891c74a target-arm: Handle "extended small page" descriptors correctly
The old ARMv5-style page table format includes a kind of second level
descriptor named the "extended small page" format, whose primary purpose
is to allow specification of the TEX memory attribute bits on a 4K page.
This exists on ARMv6 and also (as an implementation extension) on XScale
CPUs; it's UNPREDICTABLE on v5.

We were mishandling this in two ways:
 (1) we weren't implementing it for v6 (probably never noticed because
Linux will use the new-style v6 page table format there)
 (2) we were not correctly setting the page_size, which is 4K, not 1K

The latter bug went unnoticed for years because the only thing which
the page_size affects is which TLB entries get flushed when the guest
does a TLB invalidate on an address in the page, and prior to commit
2f0d8631b7 we were doing a full TLB flush very frequently due to Linux's
habit of writing the SCTLR pointlessly a lot.

(We can assume that after commit 2f0d8631b7 the bug went unnoticed
for a year because nobody's actually using the Zaurus/XScale emulation...)

Report the correct page size for these descriptors, and permit them
on ARMv6 CPUs. This fixes a problem where a kernel image for Zaurus
can boot the kernel OK but gets random segfaults when it tries to
run userspace programs.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1432844085-16441-1-git-send-email-peter.maydell@linaro.org
2015-06-15 18:06:07 +01:00
Juan Quintela 5cd8cadae8 migration: Use normal VMStateDescriptions for Subsections
We create optional sections with this patch.  But we already have
optional subsections.  Instead of having two mechanism that do the
same, we can just generalize it.

For subsections we just change:

- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
  it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
  VMStateDescription

Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12 06:53:57 +02:00
Peter Maydell 4771cd01da target-arm: Remove v8_ prefix from names of non-v8-specific cpreg arrays
The ARMCPRegInfo arrays v8_el3_no_el2_cp_reginfo and v8_el2_cp_reginfo
are actually used on non-v8 CPUs as well. Remove the incorrect v8_
prefix from their names.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1433182716-6400-1-git-send-email-peter.maydell@linaro.org
2015-06-02 15:32:43 +01:00
Eric Auger 1850b6b7d0 kvm: introduce kvm_arch_msi_data_to_gsi
On ARM the MSI data corresponds to the shared peripheral interrupt (SPI)
ID. This latter equals to the SPI index + 32. to retrieve the SPI index,
matching the gsi, an architecture specific function is introduced.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Markus Armbruster 57b6d95eb4 Revert "target-arm: Avoid g_hash_table_get_keys()"
Since we now require GLib 2.22+ (commit f40685c), we don't have to
work around lack of g_hash_table_get_keys() anymore.

This reverts commit 82a3a11897.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1432749090-4698-1-git-send-email-armbru@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias 8742d49d6f target-arm: Add TLBI_VAE2{IS}
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-11-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias 51da90140b target-arm: Add TLBI_ALLE2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-10-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias bdb9e2d66a target-arm: Add TLBI_ALLE1{IS}
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-9-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias a57633c08f target-arm: Add TTBR0_EL2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-8-git-send-email-edgar.iglesias@gmail.com
[PMM: Switch to preferred opc1/crm order for 64-bit AArch32 cpregs;
 drop unneeded use of vmsa_ttbr_writefn]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias ff05f37bab target-arm: Add TPIDR_EL2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-7-git-send-email-edgar.iglesias@gmail.com
[PMM: reordered fields into preferred opc0/opc1/crn/crm/opc2 order]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias b9cb5323bb target-arm: Add SCTLR_EL2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-6-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias 06ec4c8c9f target-arm: Add TCR_EL2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-5-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias 95f949ac3d target-arm: Add MAIR_EL2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-4-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias a903c449b4 target-arm: Break down TLB_LOCKDOWN
Break down the overly broad wildcard definition of TLB_LOCKDOWN
down to v7 level.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-3-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias 3fc827d591 target-arm: Correct check for non-EL3
This fixes a compile warning from clang 3.5 (the assertion
could never fire).

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-2-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: John Snow <jsnow@redhat.com>
[PMM: added note in commit message that this is fixing a build warning]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 13:22:29 +01:00
Peter Maydell 3960c336ad target-arm: Avoid buffer overrun on UNPREDICTABLE ldrd/strd
A LDRD or STRD where rd is not an even number is UNPREDICTABLE.
We were letting this fall through, which is OK unless rd is 15,
in which case we would attempt to do a load_reg or store_reg
to a nonexistent r16 for the second half of the double-word.
Catch the odd-numbered-rd cases and UNDEF them instead.

To do this we rearrange the structure of the code a little
so we can put the UNDEF catches at the top before we've
allocated TCG temporaries.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1431348973-21315-1-git-send-email-peter.maydell@linaro.org
2015-05-29 11:29:00 +01:00
Greg Bellows b1eced713d target-arm: Add WFx instruction trap support
Add support for trapping WFI and WFE instructions to the proper EL when
SCTLR/SCR/HCR settings apply.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
[PMM: removed unnecessary tweaking of syn_wfx() prototype;
 use raise_exception();
 don't trap on WFE (and add comment explaining why not);
 remove unnecessary ARM_FEATURE checks;
 trap to EL3, not EL1, if in S-EL0 and SCTLR check fires]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29 11:28:53 +01:00
Peter Maydell 84549b6dcf target-arm: Don't halt on WFI unless we don't have any work
Just NOP the WFI instruction if we have work to do.
This doesn't make much difference currently (though it does avoid
jumping out to the top level loop and immediately restarting),
but the distinction between "halt" and "don't halt" will become
more important when the decision to halt requires us to trap
to a higher exception level instead.

Suggested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29 11:28:53 +01:00
Peter Maydell 647f767ba3 target-arm: Move TB flags down to fill gap
Deleting the now-unused ARM_TBFLAG_CPACR_FPEN left a gap in the
bit usage; move the following ARM_TBFLAG_XSCALE_CPAR and
ARM_TBFLAG_NS_SHIFT down 3 bits to fill the gap.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29 11:28:53 +01:00
Greg Bellows 9dbbc748d6 target-arm: Extend FP checks to use an EL
Extend the ARM disassemble context to take a target exception EL instead of a
boolean enable. This change reverses the polarity of the check making a value
of 0 indicate floating point enabled (no exception).

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
[PMM: Use a common TB flag field for AArch32 and AArch64;
 CPTR_EL2 exists in v7; CPTR_EL2 should trap for EL2 accesses;
 CPTR_EL2 should not trap for secure accesses; CPTR_EL3
 should trap for EL3 accesses; CPACR traps for secure
 accesses should trap to EL3 if EL3 is AArch32]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29 11:28:53 +01:00
Peter Maydell 3cf6a0fced target-arm: Make singlestate TB flags common between AArch32/64
Currently we keep the TB flags PSTATE_SS and SS_ACTIVE in different
bit positions for AArch64 and AArch32. Replace these separate
definitions with a single common flag in the upper part of the
flags word.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29 11:28:52 +01:00
Greg Bellows c6f191642a target-arm: Add AArch64 CPTR registers
Adds CPTR_EL2/3 system registers definitions and access function.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
[PMM: merge CPTR_EL2 and HCPTR definitions into a single
 def using STATE_BOTH;
 don't use readfn/writefn to implement RAZ/WI registers;
 don't use accessfn for the no-EL2 CPTR_EL2;
 fix cpacr_access logic to catch EL2 accesses to CPACR being
 trapped to EL3;
 use new CP_ACCESS_TRAP_EL[23] rather than setting
 exception.target_el directly]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29 11:28:52 +01:00