It no longer depends on CPUArchState, so move it to qom/cpu.c.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
The current ISA mode needs to be saved in bit 0 of the resume address.
If the current instruction happens to be in a branch delay slot, then
the address of the preceding jump instruction should be stored instead.
exception_resume_pc already does both of these tasks, so it is
made available and reused.
MIPS_HFLAG_BMASK in hflags is cleared, otherwise QEMU may treat the
first instruction of the signal handler as a delay slot instruction.
Signed-off-by: Kwok Cheung Yeung <kcy@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Processors supporting the MIPS16 or microMIPS ISAs set bit 0 in target
addresses to indicate that the target is written using a compressed ISA.
During signal handling, when jumping to or returning from a signal
handler, bit 0 of the destination PC is inspected and MIPS_HFLAG_M16 in
hflags cleared or set accordingly. Bit 0 of the PC is then cleared.
Signed-off-by: Kwok Cheung Yeung <kcy@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Deleting these first makes the next patch much easier to read.
This doesn't cause any sort of compilation failure because we
have not yet enabled n32/n64 compilation. This is dead code.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf: (31 commits)
PPC: linux-user: Calculate context pointer explicitly
target-ppc: Error out for -cpu host on unknown PVR
target-ppc: Slim conversion of model definitions to QOM subclasses
PPC: Bring EPR support closer to reality
PPC: KVM: set has-idle in guest device tree
kvm: Update kernel headers
openpic: fix CTPR and de-assertion of interrupts
openpic: move IACK to its own function
openpic: IRQ_check: search the queue a word at a time
openpic: fix sense and priority bits
openpic: add some bounds checking for IRQ numbers
openpic: use standard bitmap operations
Revert "openpic: Accelerate pending irq search"
openpic: always call IRQ_check from IRQ_get_next
openpic/fsl: critical interrupts ignore mask before v4.1
openpic: make ctpr signed
openpic: rework critical interrupt support
openpic: make register names correspond better with hw docs
ppc/booke: fix crit/mcheck/debug exceptions
openpic: lower interrupt when reading the MSI register
...
Unconditional bswap replaced by __get_user/__put_user.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Peter Maydell recommended the change to be more proper. The result was tested
and shows coming up with the same proper value.
Signed-off-by: Samuel Seay <LightningTH@GMail.com>
[agraf: change subject]
Signed-off-by: Alexander Graf <agraf@suse.de>
Removed h2g() macro around the ka->_sa_handler due to the _sa_handler being a
guest memory address.
Changed the __put_user to put_user as it was attempting to put a value at the
stack address but the new address is a guest memory address, __put_user is
for host memory addresses.
Signed-off-by: Samuel Seay <LightningTH@GMail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[agraf: change subject line, reformat commit message]
Signed-off-by: Alexander Graf <agraf@suse.de>
Compare signal numbers in the proper domain.
Convert all of the fields for SIGIO and SIGCHLD.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch cleans up return sentences in the end of void functions.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
err was uninitialized, it's not OK to use |=. Spotted by Clang
compiler.
Fix by implementing the earlier statement which initializes the variable.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
glibc 2.16 will remove the undocumented definition of 'struct siginfo'
from <bits/siginfo.h>.
This change is already present in glibc 2.15.90, so qemu compilation
of certain targets (eg. cris-user) breaks.
This struct was always typedef'd to be the same as 'siginfo_t' which
is what POSIX documents, so use that instead.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Don't use global variables directly but via accessor functions. Rename globals.
Convert macros to functions, add GCC format attributes.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All architectures work the same way, and all check for sas_ss_flags ==
0. The powerpc lines are wrong, and do the check the other way round
(it's a qemu internal check, which is done wrong only for this
architecture, it's more a typo than a bug). It's NOT ppc specific,
it's POSIX standard (sigaltstack) and qemu internal.
I have a test source that I will send in a follow-up (it's longer than
I would have wished, I'm sure that a better test case can be written
if needed)
Signed-off-by: Alex Barcelo <abarcelo@ac.upc.edu>
Signed-off-by: Alexander Graf <agraf@suse.de>
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
* it's -> its (fixed for all files)
* dont -> don't (only fixed in a line which was touched by the previous fix)
* distrub -> disturb (fixed in the same line)
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
sa_flags is uint32_t for mips{,n32,64}, so don't use tswapal().
edited by Riku Voipio: likewise on alpha
Reported-by: Khansa Butt <khansa@kics.edu.pk>
Suggested-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Ehsan Ul Haq <ehsan.ulhaq@kics.edu.pk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
abi_(u)long might be different from target_ulong, so don't use tswapl
but introduce a new tswapal
Signed-off-by: Matthias Braun <matze@braunis.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
This allows a more efficient representation for 64-bit hosts.
It should be about the same for 32-bit hosts, as we can still
access the individual pieces of the double.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The code is unused since 8 years, so remove it.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The ia64 sys/ucontext.h defines macros 'uc_link', 'uc_sigmask' and
'uc_stack'. Rename the s390 target_ucontext struct members to tuc_*,
bringing them into line with the other targets and fixing a compile
failure on ia64 hosts caused by this clash.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Remove fenab as it is only written, never used. Add a FIXME
comment about the discrepancy between our behaviour and that
of the Linux kernel for this routine.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Move the access of fpu_save into the commented out skeleton code for
restoring FPU registers on SPARC sigreturn, thus silencing a gcc
4.6 "variable set but never used" warning.
(This doesn't affect the calculation of 'err' because in fact
__get_user() can never fail.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Fixes crash in i386 when user emulation base address is non-zero.
21797 rt_sigreturn(8,1082124603,1,0,1082126048,1082126248)Exit reason and status: signal 11
Signed-off-by: Mike McCormack <mj.mccormack@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
This patch removes all references to signal.h when qemu-common.h is included
as they become redundant.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds support for running s390x binaries in the linux-user emulation
code.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add uses of the float32/float64 boxing and unboxing macros so that
the ARM linux-user targets will compile with USE_SOFTFLOAT_STRUCT_TYPES
enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Suppress a gcc array bounds overrun warning when filling in the SPARC
signal frame by adjusting our definition of the structure so that the
fp and callers_pc membes are part of the ins[] array rather than
separate fields; since qemu has no need to access the fields individually
there is no need to follow the kernel's structure field naming exactly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When invoking a signal handler for an ARM target, make sure the IT
bits in the CPSR are cleared. (This would otherwise cause incorrect
execution if the IT state was non-zero when an exception occured.
This bug has been masked previously because we weren't getting the
IT state bits at exception entry right anyway.)
Also use the proper cpsr_read()/cpsr_write() interface to update
the CPSR rather than manipulating CPUState fields directly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Restore the VFP registers from the ucontext on return from a signal
handler in linux-user mode. This means that signal handlers cannot
accidentally corrupt the interrupted code's VFP state, and allows
them to deliberately modify the state via the ucontext structure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
For ARM linux-user mode signal handlers, fill in the ucontext with
VFP register contents in the same way that the kernel does. We only
do this for v2 format sigframe (2.6.12 and above); this is actually
bug-for-bug compatible with the older kernels, which don't save and
restore VFP registers either.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
The padding in the target_ucontext_v2 is defined by the size of
the target's sigset_t type, not the host's. (This bug only causes
problems when we start using the uc_regspace[] array to expose
VFP registers to userspace signal handlers.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Rename the members of target_ucontext so that they don't conflict
with possible host macros for ucontext members. This has already
been done for the other targets.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
There is disagreement between microblaze glibc and the kernel
to what the third arg of signal handlers should point to.
Change QEMU linux-user to match the kernel port. glibc patches
are pending.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
Recalculate Sparc64 CPU flags on interrupts, otherwise some earlier
flags could be stored to pstate.
Refactor PSR/CCR/CWP handling: concentrate the actual
functions to op_helper.c.
Thanks to Igor Kovalenko for reporting.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
ia64 has some strangenesses that need to be workaround:
- it has a __clone2() syscall instead of the using clone() one, with
different arguments, and which is not declared in the usual headers.
- ucontext.uc_sigmask is declared with type long int, while it is
actually of type sigset_t.
- uc_mcontext, uc_sigmask, uc_stack, uc_link are declared using #define,
which clashes with the target_ucontext fields. Change their names to
tuc_*, as already done for some target architectures.
When building with -DNDEBUG, assert(0) will not stop execution
so it must not be used for abnormal termination.
Use cpu_abort() when in CPU context, abort() otherwise.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
As "todo" comment in source code.
And modify restore_sigcontext() to have three args as kernel's does.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move userland PALcode handling into linux-user main loop so that
we can send signals from there. This also makes alpha_palcode.c
system-level only, so don't build it for userland. Add defines
for GENTRAP PALcall mapping to signals.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Force_sig should be always called with TARGET_ signals.
Not that it really matters with SEGV, so this patch is
just for cleanup and improving consistency.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In a bunch of places, 64 is used as value of _NSIG but it's wrong
at least on MIPS were _NSIG is 128.
Based on a patch from Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds signals management for linux-user.
It implements setup_frame() which allows to call the user signal
handler.
setup_rt_frame() is always unimplemented.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
I used the following command to enable debugging:
perl -p -i -e 's/^\/\/#define DEBUG/#define DEBUG/g' * */* */*/*
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When target process is killed with signal (such signal that
should dump core) a coredump file is created. This file is
similar than coredump generated by Linux (there are few exceptions
though).
Riku Voipio: added support for rlimit
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Implement setup_{,rt_}frame and do_{,rt_}sigreturn for PPC 32-bit. Use
the same TARGET_QEMU_ESIGRETURN hack as for MIPS to avoid clobbering
register state on a sigreturn.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Also fixes a register corruption bug in do_sigreturn. When "returning"
from sigreturn we are actually restoring the virtual cpu state from the
signal frame. This is actually surprisingly hard to observe in practice.
Typically an thread be blocked in a FUTEX_WAIT call when the signal arrives,
so the effect is a spurious syscall success and the introduction of a
subtle race condition.
On x86/arm a syscall modifies a single word sized register, so
do_sigreturn can just return that value. On MIPS a syscall clobbers
multiple registers, so we need additional smarts. My solution is to
invent a magic errno value that means "don't touch CPU state".
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7194 c046a42c-6fe2-441c-8c8c-71466251a162
The proper exit code for dieing from an uncaught signal is -<signal>.
The kernel doesn't allow exit() or _exit() to pass a negative value.
To get the proper exit code we need to actually die from an uncaught signal.
A default signal handler is installed, we send ourself a signal
and we wait for it to arrive.
Patch originates from Scratchbox
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7119 c046a42c-6fe2-441c-8c8c-71466251a162
and process termination in legacy applications. Try to guess which we want
based on the presence of multiple threads.
Also implement locking when modifying the CPU list.
Signed-off-by: Paul Brook <paul@codesourcery.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6735 c046a42c-6fe2-441c-8c8c-71466251a162
This patch fixes:
linux-user/signal.c:1403: warning: no previous prototype for 'do_sigreturn_v1'
linux-user/signal.c:1473: warning: no previous prototype for 'do_sigreturn_v2'
linux-user/signal.c:1511: warning: no previous prototype for 'do_rt_sigreturn_v1'
linux-user/signal.c:1552: warning: no previous prototype for 'do_rt_sigreturn_v2'
by making the appropriate functions static.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6486 c046a42c-6fe2-441c-8c8c-71466251a162
Introduce noreturn attribute and attach it to cpu_loop_exit as well as
interrupt/exception helpers for i386. This avoids a bunch of gcc4
warnings.
[ Note that this patch comes with a workaround to include qemu-common.h
even in cases where is currently causes conflicts with dyngen-exec.h.
I've been told that these conflicts will get resolved in the future
(/me will try to have a look as well - as time permits). ]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6303 c046a42c-6fe2-441c-8c8c-71466251a162
When a SIGSEGV signal is raised in user mode emulation the current
test to know whether the signal is sent by the kernel is wrong :
info->si_code == SI_KERNEL
according to /usr/include/bits/siginfo.h it should be
info->si_code > 0
Signed-off-by: Lionel Landwerlin <lionel.landwerlin@openwide.fr>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6151 c046a42c-6fe2-441c-8c8c-71466251a162
Handle signals in the user-mode GDB stub. Report them to GDB, and
allow it to change or cancel them. Also correct the protocol numbering;
it happens to match Linux numbering for SIGINT and SIGTRAP, but that's
just good fortune.
Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6096 c046a42c-6fe2-441c-8c8c-71466251a162
With this container_of can actually be used without causing build errors.
Reformat container_of.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5234 c046a42c-6fe2-441c-8c8c-71466251a162
Fix a typo in my previous comming (spotted by Laurent Desnouges).
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4877 c046a42c-6fe2-441c-8c8c-71466251a162
* Save $mof across signals.
* Cleaned up frame accesses.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4012 c046a42c-6fe2-441c-8c8c-71466251a162
which included commits to RCS files with non-trunk default branches.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3 c046a42c-6fe2-441c-8c8c-71466251a162
Andreas Färber
Kwok Cheung Yeung
Richard Henderson
Blue Swirl
Samuel Seay
Amos Kong
Richard W.M. Jones
Jia Liu
Alex Barcelo
Stefan Weil
Dong Xu Wang
Anthony Liguori
Matthias Braun
Edgar E. Iglesias
Peter Maydell
Mike McCormack
Alexandre Raymond
Ulrich Hecht
Stefan Weil
Richard Henderson
Edgar E. Iglesias
Aurelien Jarno
takasi-y@ops.dti.ne.jp
Riku Voipio
Arnaud Patard
malc
Laurent Vivier
Paul Brook
Mika Westerberg
Nathan Froyd
pbrook
aurel32
malc
blueswir1
ths
edgar_igl
balrog
bellard
j_mayer