Conversion of docs/devel/qapi-code-gen.txt to ReST left several
dangling references behind. Fix them to point to
docs/devel/qapi-code-gen.rst.
Fixes: f7aa076dbd (docs: convert qapi-code-gen.txt to ReST)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240120095327.666239-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Deletion of docs/interop/qmp-intro.txt left two dangling references
behind. Replace them by references to docs/interop/qmp-spec.rst.
Fixes: 0ec4468f23 (docs/interop: Delete qmp-intro.txt)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240120095327.666239-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240120095327.666239-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We reserved type names ending with 'Kind' because a simple union
'SomeSimpleUnion' generated both a struct type SomeSimpleUnion and an
enum type SomeSimpleUnionKind. Gone since commit 4e99f4b12c (qapi:
Drop simple unions). The commit neglected to update the documentation
not to reserve type names ending with 'Kind'. Do that now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231221145727.835905-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
tcg/s390x: Fix encoding of VRIc, VRSa, VRSc insns
tcg: Clean up error paths in alloc_code_gen_buffer_splitwx_memfd
linux-user/riscv: Adjust vdso signal frame cfa offsets
linux-user: Fixed cpu restore with pc 0 on SIGBUS
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmWvk08dHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+hSQf6A2h1vn0eVk+GaIUP
1WN1xaqvN5DmZm8AcQkdqZxdmMZO+zq592zHcZ4RNWlyq8NU93cPCLpMkw4RltLU
NkHkqXcYIXUx12StJQ4EKuGNyBSu+emkPbkd31KBMM69zDXbugAmPGH7VGn5Mw7R
8D02D8dvsG/iqmvI8L/ZJFjkrbO3A0AaSdb1Ynkwl6vlLLjpWCqoSFtwv+ZMYyWn
q9eLzrJ2pUtoO/CDq3WFnODdAh/QUMHKmgj/4YYvGylPIti7eoM24LXGJWQOeUkX
c0soBB24DEd92jJWjCsYUokcUVQOITOGbNdlhRGrxICNdIapUvVhvLW/IYxeBTlV
s5zl+g==
=rNAP
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20240123' of https://gitlab.com/rth7680/qemu into staging
tcg/arm: Fix SIGILL in tcg_out_qemu_st_direct
tcg/s390x: Fix encoding of VRIc, VRSa, VRSc insns
tcg: Clean up error paths in alloc_code_gen_buffer_splitwx_memfd
linux-user/riscv: Adjust vdso signal frame cfa offsets
linux-user: Fixed cpu restore with pc 0 on SIGBUS
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmWvk08dHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+hSQf6A2h1vn0eVk+GaIUP
# 1WN1xaqvN5DmZm8AcQkdqZxdmMZO+zq592zHcZ4RNWlyq8NU93cPCLpMkw4RltLU
# NkHkqXcYIXUx12StJQ4EKuGNyBSu+emkPbkd31KBMM69zDXbugAmPGH7VGn5Mw7R
# 8D02D8dvsG/iqmvI8L/ZJFjkrbO3A0AaSdb1Ynkwl6vlLLjpWCqoSFtwv+ZMYyWn
# q9eLzrJ2pUtoO/CDq3WFnODdAh/QUMHKmgj/4YYvGylPIti7eoM24LXGJWQOeUkX
# c0soBB24DEd92jJWjCsYUokcUVQOITOGbNdlhRGrxICNdIapUvVhvLW/IYxeBTlV
# s5zl+g==
# =rNAP
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Jan 2024 10:22:07 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20240123' of https://gitlab.com/rth7680/qemu:
tcg/arm: Fix SIGILL in tcg_out_qemu_st_direct
linux-user/elfload: check PR_GET_DUMPABLE before creating coredump
linux-user/elfload: test return value of getrlimit
linux-user/riscv: Adjust vdso signal frame cfa offsets
tcg/s390x: Fix encoding of VRIc, VRSa, VRSc insns
linux-user: Fixed cpu restore with pc 0 on SIGBUS
tcg: Make the cleanup-on-error path unique
tcg: Remove unreachable code
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
They are not used anywhere, so there's no need to keep them around.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240123182247.432642-5-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that uri_resolve_relative() has been removed, this function is not
used in QEMU anymore - and if somebody needs this functionality, they
can simply use g_uri_escape_string() from the glib instead.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240123182247.432642-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These rather complex functions have never been used since they've been
introduced in 2012, so looks like they are not really useful for QEMU.
And since the static normalize_uri_path() function is also only used by
uri_resolve(), we can remove that function now, too.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240123182247.432642-3-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
uri_string_unescape() basically does the same as the glib function
g_uri_unescape_segment(). So we can get rid of our implementation
completely by simply using the glib function instead.
Suggested-by: Stefan Weil <sw@weilnetz.de>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240123182247.432642-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We're still seeing timeouts in qtests that use a TCG payload with TCI
on a slow k8s runner:
https://gitlab.com/qemu-project/qemu/-/jobs/5990992722
So we should bump the timeout of cdrom-test to see whether that
fixes the issue.
Now, cdrom-test, as bios-tables-test, pxe-test and vmgenid-test use
the boot_sector_test() function for running a TCG payload. That
function already uses an internal timeout of 600 seconds with
the remark that the test could be slow with TCI.
Thus from the outer meson test runner side, we should not use less
than 600 seconds as timeout values for these tests. Let's bump them
on the meson side to 610 seconds so that the tests themselves can
run with their internal 600 seconds timeout and have some additional
seconds on top for reporting the outcome.
Message-ID: <20240124084412.465638-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test-iov code uses usleep() with small values (<= 30) in some
nested loops with many iterations. This causes a small delay on OSes
like Linux that have a precise sleeping mechanism, but on systems
like NetBSD and OpenBSD, each usleep() call takes multiple microseconds,
which then sum up in a total test time of multiple minutes!
Looking at the code, the usleep() does not really seem to be necessary
here - if not enough data could be send, we should simply always use
select() to wait 'til we can send more. Thus remove the usleep() and
re-arrange the code a little bit to make it more clear what is going
on here.
Suggested-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240122153347.71654-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On the slow k8s CI runner, the test sometimes takes more than 240
seconds. See for example this run here where it took ~ 267 seconds:
https://gitlab.com/qemu-project/qemu/-/jobs/5806087027#L4769
Thus we have to bump the timeout here even further to be on the
safe side. Let's use 360 seconds which should hopefully really be
high enough now.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2097
Message-ID: <20240123110353.30658-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When tcg_out_qemu_st_{index,direct} were merged, the direct case for
MO_64 was omitted, causing qemu_st_i64 to be encoded as 0xffffffff due
to underflow when adding h.base and h.index.
Fixes: 1df6d611bd ("tcg/arm: Introduce HostAddress")
Signed-off-by: Joseph Burt <caseorum@gmail.com>
Message-Id: <20240121211439.100829-1-caseorum@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A process can opt-out of coredump creation by calling
prctl(PR_SET_DUMPABLE, 0).
linux-user passes this call from the guest through to the
operating system.
From there it can be read back again to avoid creating coredumps from
qemu-user itself if the guest chose so.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240120-qemu-user-dumpable-v3-2-6aa410c933f1@t-8ch.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Should getrlimit() fail the value of dumpsize.rlimit_cur may not be
initialized. Avoid reading garbage data by checking the return value of
getrlimit.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240120-qemu-user-dumpable-v3-1-6aa410c933f1@t-8ch.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A typo in sizeof_reg put the registers at the wrong offset.
Simplify the expressions to use positive addresses from the
start of uc_mcontext instead of negative addresses from the
end of uc_mcontext.
Reported-by: Vineet Gupta <vineetg@rivosinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While the format names the second vector register 'v3',
it is still in the second position (bits 12-15) and
the argument to RXB must match.
Example error:
- e7 00 00 10 2a 33 verllf %v16,%v0,16
+ e7 00 00 10 2c 33 verllf %v16,%v16,16
Cc: qemu-stable@nongnu.org
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: 22cb37b417 ("tcg/s390x: Implement vector shift operations")
Fixes: 79cada8693 ("tcg/s390x: Implement tcg_out_dup*_vec")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2054
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240117213646.159697-2-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit f4e1168198 (linux-user: Split out host_sig{segv,bus}_handler)
introduced a bug, when returning from host_sigbus_handler the PC is
never set. Thus cpu_loop_exit_restore is called with a zero PC and
we immediate get a SIGSEGV.
Signed-off-by: Robbin Ehn <rehn@rivosinc.com>
Fixes: f4e1168198 ("linux-user: Split out host_sig{segv,bus}_handler")
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Message-Id: <33f27425878fb529b9e39ef22c303f6e0d90525f.camel@rivosinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
By calling `error_setg_errno()` before jumping to the cleanup-on-error
path at the `fail` label, the cleanup path is clearer.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20231219182212.455952-3-sam@rfc1149.net>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The `fail_rx`/`fail` block is only entered while `buf_rx` is equal to
its initial value `MAP_FAILED`. The `munmap(buf_rx, size);` was never
executed.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2030
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20231219182212.455952-2-sam@rfc1149.net>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using fleecing backup like in [0] on a qcow2 image (with metadata
preallocation) can lead to the following assertion failure:
> bdrv_co_do_block_status: Assertion `!(ret & BDRV_BLOCK_ZERO)' failed.
In the reproducer [0], it happens because the BDRV_BLOCK_RECURSE flag
will be set by the qcow2 driver, so the caller will recursively check
the file child. Then the BDRV_BLOCK_ZERO set too. Later up the call
chain, in bdrv_co_do_block_status() for the snapshot-access driver,
the assertion failure will happen, because both flags are set.
To fix it, clear the recurse flag after the recursive check was done.
In detail:
> #0 qcow2_co_block_status
Returns 0x45 = BDRV_BLOCK_RECURSE | BDRV_BLOCK_DATA |
BDRV_BLOCK_OFFSET_VALID.
> #1 bdrv_co_do_block_status
Because of the data flag, bdrv_co_do_block_status() will now also set
BDRV_BLOCK_ALLOCATED. Because of the recurse flag,
bdrv_co_do_block_status() for the bdrv_file child will be called,
which returns 0x16 = BDRV_BLOCK_ALLOCATED | BDRV_BLOCK_OFFSET_VALID |
BDRV_BLOCK_ZERO. Now the return value inherits the zero flag.
Returns 0x57 = BDRV_BLOCK_RECURSE | BDRV_BLOCK_DATA |
BDRV_BLOCK_OFFSET_VALID | BDRV_BLOCK_ALLOCATED | BDRV_BLOCK_ZERO.
> #2 bdrv_co_common_block_status_above
> #3 bdrv_co_block_status_above
> #4 bdrv_co_block_status
> #5 cbw_co_snapshot_block_status
> #6 bdrv_co_snapshot_block_status
> #7 snapshot_access_co_block_status
> #8 bdrv_co_do_block_status
Return value is propagated all the way up to here, where the assertion
failure happens, because BDRV_BLOCK_RECURSE and BDRV_BLOCK_ZERO are
both set.
> #9 bdrv_co_common_block_status_above
> #10 bdrv_co_block_status_above
> #11 block_copy_block_status
> #12 block_copy_dirty_clusters
> #13 block_copy_common
> #14 block_copy_async_co_entry
> #15 coroutine_trampoline
[0]:
> #!/bin/bash
> rm /tmp/disk.qcow2
> ./qemu-img create /tmp/disk.qcow2 -o preallocation=metadata -f qcow2 1G
> ./qemu-img create /tmp/fleecing.qcow2 -f qcow2 1G
> ./qemu-img create /tmp/backup.qcow2 -f qcow2 1G
> ./qemu-system-x86_64 --qmp stdio \
> --blockdev qcow2,node-name=node0,file.driver=file,file.filename=/tmp/disk.qcow2 \
> --blockdev qcow2,node-name=node1,file.driver=file,file.filename=/tmp/fleecing.qcow2 \
> --blockdev qcow2,node-name=node2,file.driver=file,file.filename=/tmp/backup.qcow2 \
> <<EOF
> {"execute": "qmp_capabilities"}
> {"execute": "blockdev-add", "arguments": { "driver": "copy-before-write", "file": "node0", "target": "node1", "node-name": "node3" } }
> {"execute": "blockdev-add", "arguments": { "driver": "snapshot-access", "file": "node3", "node-name": "snap0" } }
> {"execute": "blockdev-backup", "arguments": { "device": "snap0", "target": "node1", "sync": "full", "job-id": "backup0" } }
> EOF
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-id: 20240116154839.401030-1-f.ebner@proxmox.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Coroutine may be pooled even after COROUTINE_TERMINATE if
CONFIG_COROUTINE_POOL is enabled and fake stack should be saved in
such a case to keep AddressSanitizerUseAfterReturn working. Even worse,
I'm seeing stack corruption without fake stack being saved.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240117-asan-v2-1-26f9e1ea6e72@daynix.com>
This is intended to address a coverity finding: CID 1527408.
Signed-off-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Message-Id: <20240114234453.4114587-1-bcain@quicinc.com>
Now that we are using QEMU decodetree.py, remove the old decoder
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240115221443.365287-4-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Section 10.3 of the Hexagon V73 Programmer's Reference Manual
A duplex is encoded as a 32-bit instruction with bits [15:14] set to 00.
The sub-instructions that comprise a duplex are encoded as 13-bit fields
in the duplex.
Create a decoder for each subinstruction class (a, l1, l2, s1, s2).
Extend gen_trans_funcs.py to handle all instructions rather than
filter by instruction class.
There is a g_assert_not_reached() in decode_insns() in decode.c to
verify we never try to use the old decoder on 16-bit instructions.
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240115221443.365287-3-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
The Decodetree Specification can be found here
https://www.qemu.org/docs/master/devel/decodetree.html
Covers all 32-bit instructions, including HVX
We generate separate decoders for each instruction class. The reason
will be more apparent in the next patch in this series.
We add 2 new scripts
gen_decodetree.py Generate the input to decodetree.py
gen_trans_funcs.py Generate the trans_* functions used by the
output of decodetree.py
Since the functions generated by decodetree.py take DisasContext * as an
argument, we add the argument to a couple of functions that didn't need
it previously. We also set the insn field in DisasContext during decode
because it is used by the trans_* functions.
There is a g_assert_not_reached() in decode_insns() in decode.c to
verify we never try to use the old decoder on 32-bit instructions
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240115221443.365287-2-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
These functions are no longer used after making the generators
object oriented.
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20231210220712.491494-10-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
This is the only remaining use of the is_written function. We will
remove it in the subsequent commit.
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20231210220712.491494-9-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
This patch conflicts with
https://lists.gnu.org/archive/html/qemu-devel/2023-11/msg00729.html
If that series goes in first, we'll rework this patch and vice versa.
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20231210220712.491494-8-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Message-Id: <20231210220712.491494-7-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20231210220712.491494-6-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20231210220712.491494-5-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20231210220712.491494-4-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
The generators are generally a bunch of Python if-then-else
statements based on the regtype and regid. Encapsulate regtype/regid
into a class hierarchy. Clients lookup the register and invoke
methods.
This has several advantages for making the code easier to read,
understand, and maintain
- The class name makes it more clear what the operand does
- All the methods for a given type of operand are together
- Don't need hex_common.bad_register
If a regtype/regid is missing, the lookup in hex_common.get_register
will fail
- We can remove the functions in hex_common that use regtype/regid
(e.g., is_read)
This patch creates the class hierarchy in hex_common and converts
gen_tcg_funcs.py. The other scripts will be converted in subsequent
patches in this series.
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20231210220712.491494-3-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Currently, the register number (MuN) for modifier registers is the
modifier register number rather than the index into hex_gpr. This
patch changes MuN to the hex_gpr index, which is consistent with
the handling of control registers.
Note that HELPER(fcircadd) needs the CS register corresponding to the
modifier register specified in the instruction. We create a TCGv
variable "CS" to hold the value to pass to the helper.
Reviewed-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Message-Id: <20231210220712.491494-2-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Adding -Werror=shadow=compatible-local causes Hexagon not to build
when idef-parser is off. The "label" variable in CHECK_NOSHUF_PRED
shadows a variable in the surrounding code.
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231130183955.54314-1-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
This update includes support for privileged instructions.
Signed-off-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Tested-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Message-Id: <20240114232354.4109231-1-bcain@quicinc.com>
When compiling qemu with system KVM mode for LoongArch, header files
in directory linux-headers/asm-loongarch should be used firstly.
Otherwise it fails to find kvm.h on system with old glibc, since
latest kernel header files are not installed.
This patch adds linux_arch definition for LoongArch system so that
header files in directory linux-headers/asm-loongarch can be included.
Fixes: 714b03c125 ("target/loongarch: Add loongarch kvm into meson build")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240116013952.264474-1-maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The hw/core/cpu.c was split as hw/core/cpu-common.c and
hw/core/cpu-sysemu.c in the commit df4fd7d5c8 ("cpu: Split as
cpu-common / cpu-sysemu").
Update the related entry.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240115094852.3597165-2-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
I will be leaving Nutanix so updating my email in MAINTAINERS to my
personal email for now.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240111192846.111699-1-raphael.norwitz@nutanix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Some ELF files really do have segments of zero size, e.g.:
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
RISCV_ATTRIBUT 0x00000000000025b8 0x0000000000000000 0x0000000000000000
0x000000000000003e 0x0000000000000000 R 0x1
LOAD 0x0000000000001000 0x0000000080200000 0x0000000080200000
0x00000000000001d1 0x00000000000001d1 R E 0x1000
LOAD 0x00000000000011d1 0x00000000802001d1 0x00000000802001d1
0x0000000000000e37 0x0000000000000e37 RW 0x1000
LOAD 0x0000000000000120 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x1000
The current logic does not check for this condition, resulting in
the incorrect assignment of 'lowaddr' as zero.
There is already a piece of codes inside the segment traversal loop
that checks for zero-sized loadable segments for not creating empty
ROM blobs. Let's move this check to the beginning of the loop to
cover both scenarios.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240116155049.390301-1-bmeng@tinylab.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Even though the BLAST command isn't fully implemented in QEMU, the DMA_STAT_BCMBLT
bit should be set after the command has been issued to indicate that the command
has completed.
This fixes an issue with the DC390 DOS driver which issues the BLAST command as
part of its normal error recovery routine at startup, and otherwise sits in a
tight loop waiting for DMA_STAT_BCMBLT to be set before continuing.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20240112131529.515642-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The setting of DMA_STAT_DONE at the end of a DMA transfer can be configured to
generate an interrupt, however the Linux driver manually checks for DMA_STAT_DONE
being set and if it is, considers that a DMA transfer has completed.
If DMA_STAT_DONE is set but the ESP device isn't indicating an interrupt then
the Linux driver considers this to be a spurious interrupt. However this can
occur in QEMU as there is a delay between the end of DMA transfer where
DMA_STAT_DONE is set, and the ESP device raising its completion interrupt.
This appears to be an incorrect assumption in the Linux driver as the ESP and
PCI DMA interrupt sources are separate (and may not be raised exactly
together), however we can work around this by synchronising the setting of
DMA_STAT_DONE at the end of a DMA transfer with the ESP completion interrupt.
In conjunction with the previous commit Linux is now able to correctly boot
from an am53c974 PCI SCSI device on the hppa C3700 machine without emitting
"iget: checksum invalid" and "Spurious irq, sreg=10" errors.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20240112131529.515642-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The am53c974/dc390 PCI interrupt has two separate sources: the first is from the
internal ESP device, and the second is from the PCI DMA transfer logic.
Update the ESP interrupt handler so that it sets DMA_STAT_SCSIINT rather than
driving the PCI IRQ directly, and introduce a new esp_pci_update_irq() function
to generate the correct PCI IRQ level. In particular this fixes spurious interrupts
being generated by setting DMA_STAT_DONE at the end of a transfer if DMA_CMD_INTE_D
isn't set in the DMA_CMD register.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20240112131529.515642-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
