When instantiating a user-created PHB on P9/P10, we don't really have
a reason any more to go through an indirection in pnv_chip_add_phb()
in pnv.c, we can go straight to the right function in
pnv_phb4_pec.c. That way, default PHBs and user-created PHBs are all
handled in the same file. This patch also renames pnv_phb4_get_pec()
to pnv_pec_add_phb() to better reflect that it "hooks" a PHB to a PEC.
For P8, the PHBs are parented to the chip directly, so it makes sense
to keep calling pnv_chip_add_phb() in pnv.c, to also be consistent
with where default PHBs are handled. The only change here is that,
since that function is now only used for P8, we can refine the return
type.
So overall, the PnvPHB front-end now has a pnv_phb_user_get_parent()
function which handles the parenting of the user-created PHBs by
calling the right function in the right file based on the processor
version. It's also easily extensible if we ever need to support a
different parent object.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20230302163715.129635-5-fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The function pnv_phb4_get_pec() exposes some internals of the PEC and
PHB logic, yet it was in the higher level hw/ppc/pnv.c file for
historical reasons: P8 implements the PHBs from pnv.c directly, but on
P9/P10, it's done through the CEC model, which has its own file. So
move pnv_phb4_get_pec() to hw/pci-host/pnv_phb4_pec.c, where it fits
naturally.
While at it, replace the PnvPHB4 parameter by the PnvPHB front-end,
since it has all the information needed and simplify it a bit.
No functional changes.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20230302163715.129635-4-fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
So far, we were always exporting all possible PHBs to the device
tree. It works well when using the default config but it potentially
adds non-existing devices when using '-nodefaults' and user-created
PHBs, causing the firmware (skiboot) to report errors when probing
those PHBs. This patch only exports PHBs which have been realized to
the device tree.
Fixes: d786be3fe7 ("ppc/pnv: enable user created pnv-phb for powernv9")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20230302163715.129635-3-fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add an array on the PEC object to keep track of the PHBs which are
instantiated. The array can be sparsely populated when using
user-created PHBs. It will be useful for the next patch to only export
instantiated PHBs in the device tree.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20230302163715.129635-2-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
OBJECT_DECLARE_SIMPLE_TYPE() macro provides the OrIRQState
declaration for free. Besides, the QOM code style is to use
the structure name as typedef, and QEMU style is to use Camel
Case, so rename qemu_or_irq as OrIRQState.
Mechanical change using:
$ sed -i -e 's/qemu_or_irq/OrIRQState/g' $(git grep -l qemu_or_irq)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20230113200138.52869-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw.h only contains the protoype of one function nowadays, hw_error(),
so all files that do not use this function anymore also do not need
to include this header anymore.
Message-Id: <20230216142915.304481-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The name is for the region mapping the PHB xscom registers. It was
apparently a bad cut-and-paste from the per-stack pci xscom area just
above, so we had two regions with the same name.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230127122848.550083-5-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
mv64361_pcihost_map_irq() is a reimplementation of
pci_swizzle_map_irq_fn(). Resolve this redundancy.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20230106113927.8603-1-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
No need to document magic values when the definition names
from "standard-headers/linux/pci_regs.h" are self-explicit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230105173702.56610-1-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
PnvChip is typedef'ed in five places, and PnvPhb4PecState in two.
Keep one, drop the others.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221222104628.659681-5-armbru@redhat.com>
PnvChipClass, PnvChip, Pnv8Chip, Pnv9Chip, and Pnv10Chip are defined
in pnv.h. Many users of the header don't actually need them. One
instance is this inclusion loop: hw/ppc/pnv_homer.h includes
hw/ppc/pnv.h for typedef PnvChip, and vice versa for struct PnvHomer.
Similar structs live in their own headers: PnvHomerClass and PnvHomer
in pnv_homer.h, PnvLpcClass and PnvLpcController in pci_lpc.h,
PnvPsiClass, PnvPsi, Pnv8Psi, Pnv9Psi, Pnv10Psi in pnv_psi.h, ...
Move PnvChipClass, PnvChip, Pnv8Chip, Pnv9Chip, and Pnv10Chip to new
pnv_chip.h, and adjust include directives. This breaks the inclusion
loop mentioned above.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221222104628.659681-2-armbru@redhat.com>
The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This argument was added 9 years ago in commit 83d08f2673
("pc: map PCI address space as catchall region for not mapped
addresses") and has never been used since, so remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230105173826.56748-1-philmd@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Declare the TYPE_BONITO_PCI_HOST_BRIDGE QOM type in a
header to be able to access it from board code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230105130710.49264-8-philmd@linaro.org>
To make it easier to differentiate between the Host Bridge
object and its PCI function #0, rename bonito* as bonito_pci*.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230105130710.49264-4-philmd@linaro.org>
To make it easier to differentiate between the Host Bridge
object and its PCI function #0, rename bonito_pcihost* as
bonito_host*.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230105130710.49264-3-philmd@linaro.org>
Convert the TYPE_PCI_BONITO class to use 3-phase reset.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230105130710.49264-2-philmd@linaro.org>
pci_bus_irqs() coupled together the assignment of pci_set_irq_fn and
pci_map_irq_fn to a PCI bus. This coupling gets in the way when the
pci_map_irq_fn is board-specific while the pci_set_irq_fn is device-
specific.
For example, both of QEMU's PIIX south bridge models have different
pci_map_irq_fn implementations which are board-specific rather than
device-specific. These implementations should therefore reside in board
code. The pci_set_irq_fn's, however, should stay in the device models
because they access memory internal to the model.
Factoring out pci_bus_map_irqs() from pci_bus_irqs() allows the
assignments to be decoupled, resolving the problem described above.
Note also how pci_vpb_realize() which gets touched in this commit
assigns different pci_map_irq_fn's depending on the board.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109172347.1830-5-shentey@gmail.com>
[PMD: Factor out in vfu_object_set_bus_irq()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The GT-64120 is a north-bridge, and it is not MIPS specific.
Move it with the other north-bridge devices.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221209151533.69516-8-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in
pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h,
PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and
PCIESlot in pcie_port.h.
Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with
the code that needs them. Adjust include directives.
This also enables the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
and use cast to TYPE_PCI_BRIDGE instead.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221129101341.185621-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Code has not been used practically since its inception (2004)
f2aa58c6f4 UniNorth PCI bridge support
or maybe even earlier, but it was consuming contributors time
as QEMU was being rewritten.
Drop it for now. Whomever would like to actually
use the thing, can make sure it actually works/reintroduce
it back when there is a user.
PS:
I've stumbled upon this when replacing PCIDeviceClass::is_bridge
field with QOM cast to PCI_BRIDGE type. Unused DEC 21154
was the only one trying to use the field with plain PCIDevice.
It's not worth keeping the field around for the sake of the code
that was commented out 'forever'.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221129101341.185621-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert the TYPE_PHB3_MSI class to 3-phase reset, so we can
avoid using the device_class_set_parent_reset() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-8-peter.maydell@linaro.org
The realize method for the TYPE_ICS class uses qemu_register_reset()
to register a reset handler, as a workaround for the fact that
currently objects which directly inherit from TYPE_DEVICE don't get
automatically reset. However, the reset function directly calls
ics_reset(), which is the function that implements the legacy reset
method. This means that only the parent class's data gets reset, and
a subclass which also needs to handle reset, like TYPE_PHB3_MSI, has
to register its own reset function.
Make the TYPE_ICS reset function call device_cold_reset() instead:
this will handle reset for both the parent class and the subclass,
and will work whether the classes are using legacy reset or 3-phase
reset. This allows us to remove the reset function that the subclass
currently has to set up.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-6-peter.maydell@linaro.org
Convert the TYPE_CXL_ROOT_PORT and TYPE_PNV_PHB_ROOT_PORT classes to
3-phase reset, so they don't need to use the deprecated
device_class_set_parent_reset() function any more.
We have to do both in the same commit, because they keep the
parent_reset field in their common parent class's class struct.
Note that pnv_phb_root_port_class_init() was pointlessly setting
dc->reset twice, once by calling device_class_set_parent_reset()
and once directly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-5-peter.maydell@linaro.org
Currently QEMU terminates if you try to hotplug pnv-phb-root-port in
an environment where it is not supported, e.g. if doing this:
echo "device_add pnv-phb-root-port" | \
./qemu-system-ppc64 -monitor stdio -M powernv9
To avoid this problem, the pnv_phb_root_port_realize() function should
not use error_fatal when trying to set the properties which might not
be available.
Fixes: c2f3f78af5 ("ppc/pnv: set root port chassis and slot using Bus properties")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221109122210.115667-1-thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All that is left in mac.h now belongs to the nvram emulation so rename
it accordingly and only include it where it is really used.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <b82449369f718c0e207fe8c332fab550fa0230c0.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
pnv_phb3_root_bus_info and pnv_phb4_root_bus_info are missing the
instance_size initialization. This results in accessing out-of-bound
memory when setting 'chip-id' and 'phb-id', and eventually crashes
glib's malloc functionality with the following message:
"qemu-system-ppc64: GLib: ../glib-2.72.3/glib/gmem.c:131: failed to allocate 3232 bytes"
This issue was noticed only when running qtests with QEMU Windows
32-bit executable. Windows 64-bit, Linux 32/64-bit do not expose
this bug though.
Fixes: 9ae1329ee2 ("ppc/pnv: Add models for POWER8 PHB3 PCIe Host bridge")
Fixes: 4f9924c4d4 ("ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge")
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20220920103159.1865256-29-bmeng.cn@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
User creatable root ports are being parented by the 'peripheral' or the
'peripheral-anon' container. This happens because this is the regular
QOM schema for sysbus devices that are added via the command line.
Let's make this QOM hierarchy similar to what we have with default root
ports, i.e. the root port must be parented by the pnv-root-bus. To do
that we change the qom and bus parent of the root port during
root_port_realize(). The realize() is shared by the default root port
code path, so we can remove the code inside pnv_phb_attach_root_port()
that was adding the root port as a child of the bus as well.
After all that, remove pnv_phb_attach_root_port() and create the root
port explictly in the 'default_enabled()' case of pnv_phb_realize().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220819094748.400578-3-danielhb413@gmail.com>
We have 2 helpers that amends the QOM and parent bus of a given object,
repectively. These 2 helpers are called together, and not by accident.
Due to QOM internals, doing an object_unparent() will result in the
device being removed from its parent bus. This means that changing the
QOM parent requires reassigning the parent bus again.
Create a single helper called pnv_parent_fixup(), documenting some of
the QOM specifics that we're dealing with the unparenting/parenting
mechanics, and handle both the QOM and the parent bus assignment.
Next patch will make use of this function to handle a case where we need
to change the QOM parent while keeping the same parent bus assigned
beforehand.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220819094748.400578-2-danielhb413@gmail.com>
Enable pnv-phb user created devices for powernv9 now that we have
everything in place.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-9-danielhb413@gmail.com>
The bulk of the work was already done by previous patches.
Use defaults_enabled() to determine whether we need to create the
default devices or not.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-7-danielhb413@gmail.com>
pnv_parent_qom_fixup() and pnv_parent_bus_fixup() are versions of the
helpers that were reverted by commit 9c10d86fee "ppc/pnv: Remove
user-created PHB{3,4,5} devices". They are needed to amend the QOM and
bus hierarchies of user created pnv-phbs, matching them with default
pnv-phbs.
A new helper pnv_phb_user_device_init() is created to handle
user-created devices setup. We're going to call it inside
pnv_phb_realize() in case we're realizing an user created device. This
will centralize all user device realated in a single spot, leaving the
realize functions of the phb3/phb4 backends untouched.
Another helper called pnv_chip_add_phb() was added to handle the
particularities of each chip version when adding a new PHB.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-5-danielhb413@gmail.com>
For default root ports we have a way of accessing chassis and slot,
before root_port_realize(), via pnv_phb_attach_root_port(). For the
future user created root ports this won't be the case: we can't use
this helper because we don't have access to the PHB phb-id/chip-id
values.
In earlier patches we've added phb-id and chip-id to pnv-phb-root-bus
objects. We're now able to use the bus to retrieve them. The bus is
reachable for both user created and default devices, so we're changing
all the code paths. This also allow us to validate these changes with
the existing default devices.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-4-danielhb413@gmail.com>
The same rationale provided in the PHB3 bus case applies here.
Note: we could have merged both buses in a single object, like we did
with the root ports, and spare some boilerplate. The reason we opted to
preserve both buses objects is twofold:
- there's not user side advantage in doing so. Unifying the root ports
presents a clear user QOL change when we enable user created devices back.
The buses objects, aside from having a different QOM name, is transparent
to the user;
- we leave a door opened in case we want to increase the root port limit
for phb4/5 later on without having to deal with phb3 code.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-3-danielhb413@gmail.com>
We rely on the phb-id and chip-id, which are PHB properties, to assign
chassis and slot to the root port. For default devices this is no big
deal: the root port is being created under pnv_phb_realize() and the
values are being passed on via the 'index' and 'chip-id' of the
pnv_phb_attach_root_port() helper.
If we want to implement user created root ports we have a problem. The
user created root port will not be aware of which PHB it belongs to,
unless we're willing to violate QOM best practices and access the PHB
via dev->parent_bus->parent. What we can do is to access the root bus
parent bus.
Since we're already assigning the root port as QOM child of the bus, and
the bus is initiated using PHB properties, let's add phb-id and chip-id
as properties of the bus. This will allow us trivial access to them, for
both user-created and default root ports, without doing anything too
shady with QOM.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-2-danielhb413@gmail.com>
The helper is only used in this file.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-13-danielhb413@gmail.com>
The attribute is unused.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-11-danielhb413@gmail.com>
We support only a single root port, PNV_PHB_ROOT_PORT.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-10-danielhb413@gmail.com>
The unified pnv-phb-root-port can be used instead. The phb4-root-port
device isn't exposed to the user in any official QEMU release so there's
no ABI breakage in removing it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-9-danielhb413@gmail.com>
The unified pnv-phb-root-port can be used in its place. There is no ABI
breakage in doing so because no official QEMU release introduced user
creatable pnv-phb3-root-port devices.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-8-danielhb413@gmail.com>
We have two very similar root-port devices, pnv-phb3-root-port and
pnv-phb4-root-port. Both consist of a wrapper around the PCIESlot device
that, until now, has no additional attributes.
The main difference between the PHB3 and PHB4 root ports is that
pnv-phb4-root-port has the pnv_phb4_root_port_reset() callback. All
other differences can be merged in a single device without too much
trouble.
This patch introduces the unified pnv-phb-root-port that, in time, will
be used as the default root port for the pnv-phb device.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-7-danielhb413@gmail.com>
Change the parent type of the PnvPHB4 device to TYPE_PARENT since the
PCI bus is going to be initialized by the PnvPHB parent. Functions that
needs to access the bus via a PnvPHB4 object can do so via the
phb4->phb_base pointer.
pnv_phb4_pec now creates a PnvPHB object.
The powernv9 machine class will create PnvPHB devices with version '4'.
powernv10 will create using version '5'. Both are using global machine
properties in their class_init() to do that.
These changes will benefit us when adding PnvPHB user creatable devices
for powernv9 and powernv10.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-6-danielhb413@gmail.com>
Similar to what we already did for the PnvPHB3 device, let's add a
helper to init the bus when using a PnvPHB4. This helper will be used by
PnvPHb when PnvPHB4 turns into a backend.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-5-danielhb413@gmail.com>
We need a handful of changes that needs to be done in a single swoop to
turn PnvPHB3 into a PnvPHB backend.
In the PnvPHB3, since the PnvPHB device implements PCIExpressHost and
will hold the PCI bus, change PnvPHB3 parent to TYPE_DEVICE. There are a
couple of instances in pnv_phb3.c that needs to access the PCI bus, so a
phb_base pointer is added to allow access to the parent PnvPHB. The
PnvPHB3 root port will now be connected to a PnvPHB object.
In pnv.c, the powernv8 machine chip8 will now hold an array of PnvPHB
objects. pnv_get_phb3_child() needs to be adapted to return the PnvPHB3
backend from the PnvPHB child. A global property is added in
pnv_machine_power8_class_init() to ensure that all PnvPHBs are created
with phb->version = 3.
After all these changes we're still able to boot a powernv8 machine with
default settings. The real gain will come with user created PnvPHB
devices, coming up next.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-4-danielhb413@gmail.com>
The PnvPHB device is going to be the base device for all other powernv
PHBs. It consists of a device that has the same user API as the other
PHB, namely being a PCIHostBridge and having chip-id and index
properties. It also has a 'backend' pointer that will be initialized
with the PHB implementation that the device is going to use.
The initialization of the PHB backend is done by checking the PHB
version via a 'version' attribute that can be set via a global machine
property. The 'version' field will be used to make adjustments based on
the running version, e.g. PHB3 uses a 'chip' reference while PHB4 uses
'pec'. To init the PnvPHB bus we'll rely on helpers for each version.
The version 3 helper is already added (pnv_phb3_bus_init), the PHB4
helper will be added later on.
For now let's add the basic logic of the PnvPHB object, which consists
mostly of pnv_phb_realize() doing all the work of checking the
phb->version set, initializing the proper backend, passing through its
attributes to the chosen backend, finalizing the backend realize and
adding a root port in the end.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-3-danielhb413@gmail.com>
