This is just to avoid having to adjust that calculation later in
multiple places.
Note that including ->ro_mask in get_throughable_mask()'s calculation
is only an apparent (i.e. benign) behavioral change: For r/o fields it
doesn't matter > whether they get passed through - either the same flag
is also set in emu_mask (then there's no change at all) or the field is
r/o in hardware (and hence a write won't change it anyway).
This is a preparatory patch for XSA-131.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
xen_pt_pmcsr_reg_write() needs an adjustment to deal with the RW1C
nature of the not passed through bit 15 (PCI_PM_CTRL_PME_STATUS).
This is a preparatory patch for XSA-131.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
There's no point in xen_pt_pmcsr_reg_{read,write}() each ORing
PCI_PM_CTRL_STATE_MASK and PCI_PM_CTRL_NO_SOFT_RESET into a local
emu_mask variable - we can have the same effect by setting the field
descriptor's emu_mask member suitably right away. Note that
xen_pt_pmcsr_reg_write() is being retained in order to allow later
patches to be less intrusive.
This is a preparatory patch for XSA-131.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Without this the actual XSA-131 fix would cause the enable bit to not
get set anymore (due to the write back getting suppressed there based
on the OR of emu_mask, ro_mask, and res_mask).
Note that the fiddling with the enable bit shouldn't really be done by
qemu, but making this work right (via libxc and the hypervisor) will
require more extensive changes, which can be postponed until after the
security issue got addressed.
This is a preparatory patch for XSA-131.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Limit error messages resulting from bad guest behavior to avoid allowing
the guest to cause the control domain's disk to fill.
The first message in pci_msix_write() can simply be deleted, as this
is indeed bad guest behavior, but such out of bounds writes don't
really need to be logged.
The second one is more problematic, as there guest behavior may only
appear to be wrong: For one, the old logic didn't take the mask-all bit
into account. And then this shouldn't depend on host device state (i.e.
the host may have masked the entry without the guest having done so).
Plus these writes shouldn't be dropped even when an entry is unmasked.
Instead, if they can't be made take effect right away, they should take
effect on the next unmasking or enabling operation - the specification
explicitly describes such caching behavior. Until we can validly drop
the message (implementing such caching/latching behavior), issue the
message just once per MSI-X table entry.
Note that the log message in pci_msix_read() similar to the one being
removed here is not an issue: "addr" being of unsigned type, and the
maximum size of the MSI-X table being 32k, entry_nr simply can't be
negative and hence the conditonal guarding issuing of the message will
never be true.
This is XSA-130.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
It's being used by the hypervisor. For now simply mimic a device not
capable of masking, and fully emulate any accesses a guest may issue
nevertheless as simple reads/writes without side effects.
This is XSA-129.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The old logic didn't work as intended when an access spanned multiple
fields (for example a 32-bit access to the location of the MSI Message
Data field with the high 16 bits not being covered by any known field).
Remove it and derive which fields not to write to from the accessed
fields' emulation masks: When they're all ones, there's no point in
doing any host write.
This fixes a secondary issue at once: We obviously shouldn't make any
host write attempt when already the host read failed.
This is XSA-128.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This new C module will be used by ARM machine files to generate
platform bus node and their dynamic sysbus device tree nodes.
Dynamic sysbus device node addition is done in a machine init
done notifier. arm_register_platform_bus_fdt_creator does the
registration of this latter and is supposed to be called by
ARM machine files that support platform bus and their dynamic
sysbus. Addition of dynamic sysbus nodes is done only if the
user did not provide any dtb.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1433244554-12898-2-git-send-email-eric.auger@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After introduction of kvm_arch_msi_data_to_gsi, kvm_gsi_direct_mapping
now can be set on ARM. Also kvm_msi_via_irqfd_allowed can be set,
depending on kernel irqfd support, hence enabling VIRTIO-PCI with
vhost back-end.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The masked interrupt status register should be the state of the interrupt
after masking.
There should be a logical AND instead of a logical OR between the
interrupt status and the interrupt mask.
Signed-off-by: Victor CLEMENT <victor.clement@openwide.fr>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1433154824-6927-1-git-send-email-victor.clement@openwide.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a GICv2m device to the virt board to enable MSIs on the generic PCI
host controller. We allocate 64 SPIs in the IRQ space for now (this can
be increased/decreased later) and map the GICv2m right after the GIC in
the memory map.
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1432897270-7780-5-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for adding the GICv2m which requires address specifiers
and is a subnode of the gic, we extend the gic DT definition to specify
the #address-cells and #size-cells properties and add an empty ranges
property properties of the DT node, since this is required to add the
v2m node as a child of the gic node.
Note that we must also expand the irq-map to reference the gic with the
right address-cells as a consequence of this change.
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1432897270-7780-4-git-send-email-christoffer.dall@linaro.org
Suggested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARM GICv2m widget is a little device that handles MSI interrupt
writes to a trigger register and ties them to a range of interrupt lines
wires to the GIC. It has a few status/id registers and the interrupt wires,
and that's about it.
A board instantiates the device by setting the base SPI number and
number SPIs for the frame. The base-spi parameter is indexed in the SPI
number space only, so base-spi == 0, means IRQ number 32. When a device
(the PCI host controller) writes to the trigger register, the payload is
the GIC IRQ number, so we have to subtract 32 from that and then index
into our frame of SPIs.
When instantiating a GICv2m device, tell PCI that we have instantiated
something that can deal with MSIs. We rely on the board actually wiring
up the GICv2m to the PCI host controller.
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1432897270-7780-3-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of passing the GIC phandle around between functions, add it to
the VirtBoardInfo just like we do for the clock_phandle. We are about
to add the v2m phandle as well, and it's easier not having to pass
around a bunch of phandles, return multiple values from functions, etc.
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1432897270-7780-2-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All QMP commands use the "new" handler interface (mhandler.cmd_new).
Most HMP commands still use the traditional interface (mhandler.cmd),
but a few use the "new" one. Complicates handle_user_command() for no
gain, so I'm converting these to the traditional interface.
pcie_aer_inject_error's implementation is split into the
hmp_pcie_aer_inject_error() and pcie_aer_inject_error_print(). The
former is a peculiar crossbreed between HMP and QMP handler. On
success, it works like a QMP handler: store QDict through ret_data
parameter, return 0. Printing the QDict is left to
pcie_aer_inject_error_print(). On failure, it works more like an HMP
handler: print error to monitor, return negative number.
To convert to the traditional interface, turn
pcie_aer_inject_error_print() into a command handler wrapping around
hmp_pcie_aer_inject_error(). By convention, this command handler
should be called hmp_pcie_aer_inject_error(), so rename the existing
hmp_pcie_aer_inject_error() to do_pcie_aer_inject_error().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
commit 5cb18b3d7b
TPM2 ACPI table support
was missing a file, so build with iasl fails
(build without iasl works since it uses the generated
hex files).
Reported-by: "Daniel P. Berrange" <berrange@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Based on patch by Nikolay Nikolaev:
Vhost-user will implement the multi queue support in a similar way
to what vhost already has - a separate thread for each queue.
To enable the multi queue functionality - a new command line parameter
"queues" is introduced for the vhost-user netdev.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make features 64bit wide everywhere.
On migration a full 64bit guest_features field is sent if one of the
high bits is set, in addition to the lower 32bit guest_features field
which must stay for compatibility reasons. That way we send the lower
32 feature bits twice, but the code is simpler because we don't have
to split and compose the 64bit features into two 32bit fields.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Needed for virtio features which go from 32bit to 64bit with virtio 1.0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
set_host_notifier and set_guest_notifiers supported by virtio-mmio now.
Most code copied from virtio-pci.
This makes it possible to use vhost-net with virtio-mmio,
improving performance by about 30%.
The kvm-arm does not yet support irqfd, need to fix the hard-coded part after
kvm-arm gets irqfd support.
Signed-off-by: Ying-Shiuan Pan <yingshiuan.pan@gmail.com>
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Add encoding for ACPI DefIncrement Opcode.
Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add encoding for ACPI DefShiftRight Opcode.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Add encoding for ACPI DefShiftLeft Opcode.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Add encoding for ACPI DefIndex Opcode.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Add encoding for ACPI DefLLess Opcode.
Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add encoding for ACPI DefAdd Opcode.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Add a TPM2 ACPI table if a TPM 2 is used in the backend.
Also add an SSDT for the TPM 2.
Rename tpm_find() to tpm_get_version() and have this function
return the version of the TPM found, TPMVersion_Unspec if
no TPM is found. Use the version number to build version
specific ACPI tables.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the TPM passthrough backend driver, modify the probing code so
that we can check whether a TPM 1.2 or TPM 2 is being used
and adapt the behavior of the TPM TIS accordingly.
Move the code that tested for a TPM 1.2 into tpm_utils.c
and extend it with test for probing for TPM 2. Have the
function return the version of TPM found.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following the recent upgrade to version 1.3, extend the TPM TIS
interface with capabilities introduced for support of a TPM 2.
TPM TIS for TPM 2 introduced the following extensions beyond the
TPM TIS 1.3 (used for TPM 1.2):
- A new 32bit interface Id register was introduced.
- New flags for the status (STS) register were defined.
- New flags for the capability flags were defined.
Support the above if a TPM TIS 1.3 for TPM 2 is used with a TPM 2
on the backend side. Support the old TPM TIS 1.3 configuration if a
TPM 1.2 is being used. A subsequent patch will then determine which
TPM version is being used in the backend.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GICv3 ITS distinguishes between devices by using hardwired device IDs passed on the bus.
This patch implements passing these IDs in qemu.
SMMU is also known to use stream IDs, therefore this addition can also be useful for
implementing platforms with SMMU.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Changes from v1:
- Added bus number to the stream ID
- Added stream ID not only to MSI-X, but also to plain MSI. Some common code was made into
msi_send_message() function.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
build_append_namestringv() and aml_string() first calculate the
resulting string's length with vsnprintf(NULL, ...), then allocate,
then print for real. Simply use g_strdup_vprintf() or g_vasprintf()
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
It is Very annoying to carry forward an outdatEd coNtroller with a mOdern
Machine type.
Hence, let us not instantiate the FDC when all of the following apply:
- the machine type is pc-q35-2.4 or later,
- "-device isa-fdc" is not passed on the command line (nor in the config
file),
- no "-drive if=floppy,..." is requested.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
The "no_floppy = 1" machine class setting causes "default_floppy" in
main() to become zero. Consequently, default_drive() will not call
drive_add() and drive_new() for IF_FLOPPY, index=0, meaning that no
default floppy drive will be created for the virtual machine. In that
case, board code should also not insist on the creation of the
board-default FDC.
The board-default FDC will still be created if the user requests a floppy
drive with "-drive if=floppy".
Additionally, separate FDCs can be specified manually with "-device
isa-fdc". They allow the
-device isa-fdc,driveA=...
syntax that is more flexible than the one required by the board-default
FDC:
-global isa-fdc.driveA=...
This patch doesn't change the behavior observably, as all Q35 machine
types have "no_floppy = 0".
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Even if board code decides not to request the creation of the FDC (keyed
off board-level factors, to be determined later), we should create the FDC
nevertheless if the user passes '-drive if=floppy' on the command line.
Otherwise '-drive if=floppy' would break without explicit '-device
isa-fdc' on such boards.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This patch introduces no observable change, but it allows the callers of
pc_basic_device_init(), ie. pc_init1() and pc_q35_init(), to request (or
not request) the creation of the FDC explicitly.
At the moment both callers pass constant create_fdctrl=true (hence no
observable change).
Assuming a board passes create_fdctrl=false, "floppy" will be NULL on
output, and (beyond the FDC not being created) that NULL will be passed on
to pc_cmos_init(). Luckily, pc_cmos_init() already handles that case.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
VIRTIO_PCI_QUEUE_MAX is not only used for pci, so rename it be generic.
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduce a virtio-s390 specific device_plugged() function
and doing the number of virtqueue validation inside.
Cc: Alexander Graf <agraf@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces virtio_get_num_queues() which iterates the vqs
array and return the number of virtqueues used by device.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch passes error pointer to transport specific device_plugged()
callback. Through this way, device_plugged() can do some transport
specific check and fail. This will be uesd by following patches that
check the number of virtqueues against the transport limitation.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of adding queues for multiqueue during feature set. This patch
did this in .realize(), this will help the following patches that
count the number of virtqueues used in .device_plugged() callback.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nearly all transports have been offering VIRTIO_F_NOTIFY_ON_EMPTY,
s390-virtio being the exception. There's no reason why it shouldn't
offer it as well, though (handling is done in core anyway), so let's
move it to the common virtio features.
While we're changing it anyway, fix the indentation for the
DEFINE_VIRTIO_COMMON_FEATURES macro.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This was copied from virtio-pci, but it doesn't make much sense for
ccw, as it doesn't have to handle the broken implementations this bit
is supposed to deal with. Remove it.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move host_features from the individual transport proxies into
the virtio device. Transports may continue to add feature bits
during device plugging.
This should it make easier to offer different sets of host features
for virtio-1/transitional support.
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the old times, we always had pvpanic in ACPI and a _STA method told
the guest not to use it. Automatic generation dropped the _STA method
as the specification says that missing _STA means enabled and working.
Some guests (Linux) had buggy drivers and this change made them unable
to utilize pvpanic.
A Linux patch is posted as well, but I think it's worth to make pvpanic
useable on old guests at the price of three lines and few bytes of SSDT.
The old _STA method was
Method (_STA, 0, NotSerialized) {
Store (PEST, Local0)
If (LEqual (Local0, Zero)) {
Return (Zero) }
Else {
Return (0x0F) }}
Igor pointed out that we don't need to use a method to return a constant
and that 0xB (don't show in UI) is the common definition now.
Also, the device used to be PEVT. (PEVT as in "panic event"?)
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All pc-i440fx and pc-q35 init functions simply call the corresponding
compat function and then call the main init function. Use a macro to
generate that code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function is not needed anymore, we can simply call pc_init1()
directly.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This looks like a step backwards, but it will allow pc-0.1[0123] and
isapc to follow the same compat+init pattern used by the other
machine-types, allowing us to generate all init function using the same
macro later.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The helper is not needed anymore, as the PC machine classes are
registered using QOM directly.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that we have a DEFINE_PC_MACHINE helper macro that just requires an
initialization function, it is trivial to convert them to register a QOM
machine class directly, instead of using QEMUMachine.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will simplify the DEFINE_PC_MACHINE macro, and will help us to
implement reuse of PC_COMPAT_* macros through class_init function reuse,
in the future.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
By now the new functions will get QEMUMachine as argument, but they will
be later converted to initialize a MachineClass struct directly.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will automatically generate the existing QEMUMachine structs based
on the *_MACHINE_OPTIONS macros, and automatically add registration code
for them.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Define a MACHINE_OPTIONS macro for each PC machine, and move every field
inside the QEMUMachine structs to the macros, except for name, init, and
compat_props.
This also ensures that all MACHINE_OPTIONS inherit the fields from the
next version, so their definitions carry only the changes that exist
between one version and the next one.
Comments about specific cases:
pc-*-2.1:
Existing PC_*_2_1_MACHINE_OPTIONS macros were defined as:
PC_*_MACHINE_OPTIONS,
.default_machine_opts = "firmware=bios-256k.bin"
PC_*_2_2_MACHINE_OPTIONS is:
PC_*_2_3_MACHINE_OPTIONS
which is expanded to:
PC_*_MACHINE_OPTIONS,
.default_machine_opts = "firmware=bios-256k.bin",
.default_display = "std"
The only difference between 2_1 and 2_2 is .default_display, that's why
we didn't reuse PC_*_2_2_MACHINE_OPTIONS. The good news is that having
multiple initializers for a field is allowed by C99, and the last
initializer overrides the previous ones.
So we can reuse the 2_2 macro in 2_1 and define PC_*_2_1_MACHINE_OPTIONS
as:
PC_*_2_2_MACHINE_OPTIONS,
.default_display = NULL
pc-*-1.7:
PC_*_1_7_MACHINE_OPTIONS was defined as:
PC_*_MACHINE_OPTIONS
PC_*_2_0_MACHINE_OPTIONS is defined as:
PC_*_2_1_MACHINE_OPTIONS
which is expanded to:
PC_*_2_2_MACHINE_OPTIONS,
.default_display = NULL
which is expanded to:
PC_*_2_3_MACHINE_OPTIONS,
.default_display = NULL
which is expanded to:
PC_*_MACHINE_OPTIONS,
.default_machine_opts = "firmware=bios-256k.bin",
.default_display = "std",
.default_display = NULL /* overrides the previous line */
So, the only difference between PC_*_1_7_MACHINE_OPTIONS and
PC_*_2_0_MACHINE_OPTIONS is .default_machine_opts (as .default_display
is not explicitly set by PC_*_MACHINE_OPTIONS so it is NULL).
So we can keep the macro reuse pattern and define
PC_*_2_0_MACHINE_OPTIONS as:
PC_*_2_0_MACHINE_OPTIONS,
.default_machine_opts = NULL
pc-*-2.4 (alias and is_default fields):
Set alias and is_default fields inside the 2.4 MACHINE_OPTIONS macro,
and clear it in the 2.3 macro (that reuses the 2.4 macro).
hw_machine:
As all the machines older than v1.0 set hw_version explicitly, we can
safely move the field to the MACHINE_OPTIONS macros without affecting
the other versions that reuse them.
init function:
Some machines had the init function set inside the MACHINE_OPTIONS
macro. Move it to the QEMUMachine declaration, to keep it consistent
with the other machines.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move compat_props from pc-0.10 to the macro, to make it consistent with
the other machines.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VGA and vmware-svga rombar compat properties were added by commit
281a26b15b, but only to pc-0.13 and
pc-0.12. This breaks the PC_COMPAT_* nesting pattern we currently
follow.
The new variables will now be inherited by pc-0.11 and older, but
pc-0.11 and pc-0.10 already have PCI.rombar=0 on compat_props, so they
shouldn't be affected at all.
Cc: Stefan Weil <sw@weilnetz.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The compat property was added by commit
9dbcca5aa1, and the pc-0.12 and older
machine-types were not changed because virtio-9p-pci was introduced on QEMU
0.13 (commit 9f10751365). The only problem is
that this breaks the PC_COMPAT_* nesting pattern we currently use.
So, move the property to PC_COMPAT_0_13. This make pc-0.12 and older inherit
it, but that shouldn't be an issue as QEMU 0.12 didn't have virtio-9p-pci.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current code setting ide-drive.ver and scsi-disk.ver on pc-0.11
breaks the PC_COMPAT_* nesting pattern we currently use.
As those variables are overwritten in pc-0.10 too, they can be inherited
by pc-0.10 with no side-effects at all.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Those properties were introduced by commit
3827cdb1c3. They were not duplicated into
pc-0.13 and older because 0.14 was the first QEMU version supporting
qxl. The only problem is that this breaks the PC_COMPAT_* nesting
pattern we currently use.
So, move the properties to PC_COMPAT_0_14. This makes pc-0.13 and older
inherit them, but that shouldn't be an issue as QEMU 0.13 didn't support
qxl.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Don't add the pseries-2.3 machine yet, but define the corresponding
SPAPR_COMPAT macro to make sure both pseries-2.2 and pseries-2.1 will
inherit HW_COMPAT_2_3.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
SPAPR_COMPAT_2_1 will need to include both HW_COMPAT_2_2 and
HW_COMPAT_2_1, so include HW_COMPAT_2_1 inside SPAPR_COMPAT_2_1 and
HW_COMPAT_2_2 inside SPAPR_COMPAT_2_2.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Once we start adding compat code for pc-2.3, the usage of HW_COMPAT_2_1
in pc-*-2.2 won't be enough, as it also has to include PC_COMPAT_2_3
inside it. To ensure that, define PC_COMPAT_2_3, PC_COMPAT_2_2, and
PC_COMPAT_2_1 macros.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Changing the convention to include commas inside the macros will allow
macros containing empty lists to be defined and used without compilation
errors.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Changing the convention to include commas inside the macros will allow
macros containing empty lists to be defined and used without compilation
errors.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Changing the convention to include commas inside the macros will allow
macros containing empty lists to be defined and used without compilation
errors.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Coding style change only.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is in preparation for using alias property in virtio-balloon-pci
and virtio-balloon-ccw.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
* Support ACPI for ARMv8 systems using the 'virt' board
(and a UEFI boot image, typically)
* avoid buffer overrun in some UNPREDICTABLE ldrd/strd cases
* further work preparing for 64-bit EL2/EL3 support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCAAGBQJVaEn+AAoJEDwlJe0UNgzeqE0P/i3stCseXlDPVXRYBHH32YxJ
mduKnzvJ0uWYODSicmFivA8hyOtu/Q0t1H2V7XvDEy2UZ1jHZ0bZBzm9DieubStH
q5RrbbRVTEBVvO8uBXnu6fMbD/p0TbtyvsA8siTCorkWANq3MVsMbxTnN2jc2QGj
ytB+nUF/lDm7rLBPJyBqblvBZOHMSaH5IzMAjeqwi6zPG4MfGDya48J82MZ+3k9W
OGIRbV4rhFFyqwbu0zIMUYgVA0xyvK/hKQ1CVai/GEu7L7lZlEb6UnmoNQGmTjH/
XtyHYsiVauA4M7POJ5G2c6Q7UsZHEKZJmnGVIkEyC8ZERhflWJ6MT2bNr1TsViUi
8Lannl0dPZpPld0GZt2QVF6uyvR/RtbuX41kDCPW1+nCB1kBXWO6JvuNjb+JQ6Dm
co2+LlIYK5avxUkPxzVkKdqS9HVaQ8yZ+wwKvX+gOthM6pa6uDRZsrhJWX2pFzD/
hK3c1PQPIPWOnZO4adpeOiaRuctqjZlihfh5saXxidfVYm6ZfNxza2hi3j75mKlR
mCo7dlCsFrH4IZniRSe5rCr+QGol3J2ViThmZnBL5OrFBFe2T/GtPCBJrY+1OW2o
99nBmsGd5xbuH3qdZxIjq0/nxtkSmlFJSpH75yi+TmRS9fKcNdK8RWaU52wmFi1/
sIt5E6qKnt03IaZyxJLt
=dFxn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150529' into staging
target-arm:
* Support ACPI for ARMv8 systems using the 'virt' board
(and a UEFI boot image, typically)
* avoid buffer overrun in some UNPREDICTABLE ldrd/strd cases
* further work preparing for 64-bit EL2/EL3 support
# gpg: Signature made Fri May 29 12:14:06 2015 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20150529: (39 commits)
target-arm: Avoid buffer overrun on UNPREDICTABLE ldrd/strd
hw/arm/virt: Enable dynamic generation of ACPI v5.1 tables
ACPI: split CONFIG_ACPI into 4 pieces
hw/arm/virt-acpi-build: Add PCIe controller in ACPI DSDT table
hw/acpi/aml-build: Add Unicode macro
hw/acpi/aml-build: Add aml_dword_io() term
hw/acpi/aml-build: Add aml_create_dword_field() term
hw/acpi/aml-build: Add aml_else() term
hw/acpi/aml-build: Add aml_lnot() term
hw/acpi/aml-build: Add aml_or() term
hw/acpi/aml-build: Add ToUUID macro
hw/acpi/aml-build: Make aml_buffer() definition consistent with the spec
hw/arm/virt-acpi-build: Generate MCFG table
hw/arm/virt-acpi-build: Generate RSDP table
hw/arm/virt-acpi-build: Generate RSDT table
hw/arm/virt-acpi-build: Generate GTDT table
hw/arm/virt-acpi-build: Generate MADT table
hw/arm/virt-acpi-build: Generate FADT table and update ACPI headers
hw/arm/virt-acpi-build: Generation of DSDT table for virt devices
hw/acpi/aml-build: Add aml_interrupt() term
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As core.c, piix4.c, ich9.c and pcihp.c are for x86, add CONFIG_ACPI_X86
to make it only for x86. ARM doesn't support cpu and memory hotplug, add
CONFIG_ACPI_CPU_HOTPLUG and CONFIG_ACPI_MEMORY_HOTPLUG to exclude them
for target-arm.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-24-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add PCIe controller in ACPI DSDT table, so the guest can detect
the PCIe.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1432522520-8068-23-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add ToUUID macro, this is useful for generating PCIe ACPI table.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1432522520-8068-16-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to ACPI spec, DefBuffer can take two parameters: BufferSize
and ByteList. Make it consistent with the spec. Uninitialized buffer
could be requested by passing ByteList as NULL to reserve space.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1432522520-8068-15-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
RSDP points to RSDT which in turn points to other tables.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-13-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
RSDT points to other tables FADT, MADT, GTDT. This code is shared with x86.
Here we still use RSDT as UEFI puts ACPI tables below 4G address space,
and UEFI ignore the RSDT or XSDT.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-12-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ACPI v5.1 defines GTDT for ARM devices as a place to describe timer
related information in the system. The Arch Timer interrupts must
be provided for GTDT.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-11-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MADT describes GIC enabled ARM platforms. The GICC and GICD
subtables are used to define the GIC regions.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-10-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the case of mach virt, it is used to set the Hardware Reduced bit
and enable PSCI SMP booting through HVC. So ignore FACS and FADT
points to DSDT.
Update the header definitions for FADT taking into account the new
additions of ACPI v5.1 in `include/hw/acpi/acpi-defs.h`
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1432522520-8068-9-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
DSDT consists of the usual common table header plus a definition
block in AML encoding which describes all devices in the platform.
After initializing DSDT with header information the namespace is
created which is followed by the device encodings. The devices are
described using the Resource Template for the 32-Bit Fixed Memory
Range and the Extended Interrupt Descriptors.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-8-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add aml_interrupt() for describing device interrupt in resource template.
These can be used to generating DSDT table for ACPI on ARM.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1432522520-8068-7-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add aml_memory32_fixed() for describing device mmio region in resource
template. These can be used to generating DSDT table for ACPI on ARM.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1432522520-8068-6-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a preliminary framework in virt-acpi-build.c with the main
ACPI build functions. It exposes the generated ACPI contents to
guest over fw_cfg.
The required ACPI v5.1 tables for ARM are:
- RSDP: Initial table that points to XSDT
- RSDT: Points to FADT GTDT MADT tables
- FADT: Generic information about the machine
- GTDT: Generic timer description table
- MADT: Multiple APIC description table
- DSDT: Holds all information about system devices/peripherals, pointed by FADT
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1432522520-8068-5-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To generate ACPI table for PCIe controller, we need the base and size of
the PCIe ranges. Record these ranges in MemMapEntry array, then we could
share and use them for generating ACPI table.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1432522520-8068-4-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move some common definitions to virt.h. These will be used by
generating ACPI tables.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-3-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the virtio-input-hid base class and
virtio-{keyboard,mouse,tablet} subclasses building on the base class.
They are hooked up to the qemu input core and deliver input events
to the guest like all other hid devices (ps/2 kbd, usb tablet, ...).
Using them is as simple as adding "-device virtio-tablet-device" to
your command line, for use all transports except pci. virtio-pci
support comes as separate patch, once virtio-pci got virtio 1.0
support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds virtio-input support to qemu. It brings a abstract
base class providing core support, other classes can build on it to
actually implement input devices.
virtio-input basically sends linux input layer events (evdev) over
virtio.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Skip mm_time updates (in qxl device memory) in case the guest is stopped.
Guest isn't able to look anyway, and it causes problems with migration.
Also make sure the initial state for spice server is stopped.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When the virtio serial is writable, notify the chardev backend
with qemu_chr_accept_input().
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This continues the IOMMU fix from 2.3, where we should not attempt
to remap the CLB or FIS RX buffers if the AHCI device is currently
running.
The same applies to migration: keep our mitts off these registers
unless the device is supposed to be on.
Does not impact backwards compatibility for the AHCI device.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1431470173-30847-2-git-send-email-jsnow@redhat.com
Similarly switch the macio IDE routines over to use the new function and
tidy-up the remaining code as required.
[Maintainer edit: printf format codes adjusted for 32/64bit. --js]
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: John Snow <jsnow@redhat.com>
Message-id: 1425939893-14404-3-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: John Snow <jsnow@redhat.com>
This considerably helps simplify the complexity of the macio read routines and
by switching macio CDROM accesses to use the new code, fixes the issue with
the CDROM device being detected intermittently by Darwin/OS X.
[Maintainer edit: printf format codes adjusted for 32/64bit. --js]
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ailande.co.uk>
Acked-by: John Snow <jsnow@redhat.com>
Message-id: 1425939893-14404-2-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: John Snow <jsnow@redhat.com>
Lift the flag preventing the migration of the ICH9/AHCI devices.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-5-git-send-email-jsnow@redhat.com
The SCSI emulation in the Linux NVMe driver really wants to know
if a device has a volatile write cache. Given that qemu has moved
away from a model where we report the backing store WCE bit to
one where the WCE bit is supposed to be part of the migratable
guest-visible state we always return 1 here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Put the number of serial ports into a local variable in
multi_serial_pci_realize, then increment the port count
(pci->ports) as we initialize the serial port cores.
Now pci->ports always holds the number of successfully
initialized ports and we can use multi_serial_pci_exit
to properly cleanup the already initialized bits in case
of a init failure.
https://bugzilla.redhat.com/show_bug.cgi?id=970551
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Add bootloader support using standard ARM bootloader.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: b829abaf2b70d02b28e79301553cbd74afc416a1.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Zynq MPSoC supports external DDR RAM. Add a RAM at 0 to the model.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 2c25e2a4198402a6477aef2975d5df7c415dd341.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a machine model for the Xilinx ZynqMP SoC EP108 board.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 3896b34c862f370dc0679e4428bf3848d1f9f83c.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are 2x Cadence UARTs in Zynq MP. Add them.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: e30795536f77599fabc1052278d846ccd52322e2.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a new header for Cadence UART to allow using the device with
modern SoC programming conventions. The state struct needs to be
visible to embed the device in SoC containers.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 46a0fbd45b6b205f54c4a8c778deb75c77f8abdf.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clean up some variable names in preparation for migrating the state struct
and type cast macro to a public header. The acronym "UART" on it's own is
not specific enough to be used in a more global namespace so preface with
"cadence". Fix the capitalisation of "uart" in the state type while touching
the typename. Preface macros used by the state struct itself with CADENCE_UART
so they don't conflict in namespace either.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 3812b7426c338beae9e082557f3524a99310ddc6.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are 4x Cadence GEMs in ZynqMP. Add them.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 7d3e68e5495d145255f0ee567046415e3a26d67e.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a new header for Cadence GEM to allow using the device with
modern SoC programming conventions. The state struct needs to be
visible to embed the device in SoC containers.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a98b5df6440c5bff8f813a26bb53ce1cfefb4c4c.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cleanup some variable names in preparation for migrating the state
struct and type cast macro to a public header. The acronym "GEM" on
its own is not specific enough to be used in a more global namespace
so preface with "cadence". Fix the capitalisation of "gem" in the
state type while touching the typename. Also preface the GEM_MAXREG
macro as this will need to migrate to public header.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 8e2b0687b3a7b7a3fde5ba2f3bee6f3b911e84ef.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect the GPIO outputs from the individual CPUs for the timers to the
GIC.
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a7866a4f0c903c91fa3034210b4d2879aa4bfcb9.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the GIC and connect IRQ outputs to the CPUs. The GIC regions are
under-decoded through a 64k address region so implement aliases
accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5853189965728d676106d9e94e76b9bb87981cb5.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With quad Cortex-A53 CPUs.
Use SMC PSCI, with the standard policy of secondaries starting in
power-off.
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a16202a6c7b79e446e5289d38cb18d2ee4b897a0.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
During processing of certain commands such as FD_CMD_READ_ID and
FD_CMD_DRIVE_SPECIFICATION_COMMAND the fifo memory access could
get out of bounds leading to memory corruption with values coming
from the guest.
Fix this by making sure that the index is always bounded by the
allocated memory.
This is CVE-2015-3456.
Signed-off-by: Petr Matousek <pmatouse@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Connect FIQ output of the GIC CPU interfaces to the CPUs.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-17-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-3-git-send-email-greg.bellows@linaro.org
[PMM: minor format tweak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support to gic_update() for determining the current IRQ
and FIQ status when interrupt grouping is supported. This
simply requires that instead of always raising IRQ we
check the group of the highest priority pending interrupt
and the GICC_CTLR.FIQEn bit to see whether we should raise
IRQ or FIQ.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1430502643-25909-15-git-send-email-peter.maydell@linaro.org
Grouping (GICv2) and Security Extensions change the behavior of IAR
reads. Acknowledging Group0 interrupts is only allowed from Secure
state and acknowledging Group1 interrupts from Secure state is only
allowed if AckCtl bit is set.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-14-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-14-git-send-email-greg.bellows@linaro.org
[PMM: simplify significantly by reusing the existing
gic_get_current_pending_irq() rather than reimplementing the
same logic here]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Grouping (GICv2) and Security Extensions change the behavior of EOIR
writes. Completing Group0 interrupts is only allowed from Secure state.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-13-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-13-git-send-email-greg.bellows@linaro.org
[PMM: Rather than go to great lengths to ignore the UNPREDICTABLE case
of a Secure EOI of a Group1 (NS) irq with AckCtl == 0, we just let
it fall through; add a comment about it.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Grouping (GICv2) and Security Extensions change the behaviour of reads
of the highest priority pending interrupt register (ICCHPIR/GICC_HPPIR).
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-12-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-12-git-send-email-greg.bellows@linaro.org
[PMM: make utility fn static; coding style fixes; AckCtl has an effect
for GICv2 without security extensions as well; removed checks on enable
bits because these are done when we set current_pending[cpu]]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
GICs with Security Extensions restrict the non-secure view of the
interrupt priority and priority mask registers.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-11-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-15-git-send-email-greg.bellows@linaro.org
[PMM: minor code tweaks; fixed missing masking in gic_set_priority_mask
and gic_set_priority]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For GICs with Security Extensions Non-secure reads have a restricted
view on the current running priority.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-10-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-11-git-send-email-greg.bellows@linaro.org
[PMM: make function static, minor comment tweak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ICCICR/GICC_CTLR is banked in GICv1 implementations with Security
Extensions or in GICv2 in independent from Security Extensions.
This makes it possible to enable forwarding of interrupts from
the CPU interfaces to the connected processors for Group0 and Group1.
We also allow to set additional bits like AckCtl and FIQEn by changing
the type from bool to uint32. Since the field does not only store the
enable bit anymore and since we are touching the vmstate, we use the
opportunity to rename the field to cpu_ctlr.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-9-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-9-git-send-email-greg.bellows@linaro.org
[PMM: rewrote to store state in a single uint32_t rather than
keeping the NS and S banked variants separate; this considerably
simplifies the get/set functions]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This register is banked in GICs with Security Extensions. Storing the
non-secure copy of BPR in the abpr, which is an alias to the non-secure
copy for secure access. ABPR itself is only accessible from secure state
if the GIC implements Security Extensions.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-8-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-10-git-send-email-greg.bellows@linaro.org
[PMM: rewrote to fix style issues and correct handling of GICv2
without security extensions]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ICDDCR/GICD_CTLR is banked if the GIC has the security extensions,
and the S (or only) copy has separate enable bits for Group0 and
Group1 enable if the GIC implements interrupt groups.
EnableGroup0 (Bit [1]) in GICv1 is architecturally IMPDEF. Since this
bit (Enable Non-secure) is present in the integrated GIC of the Cortex-A9
MPCore, we support this bit in our GICv1 implementation too.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-7-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-8-git-send-email-greg.bellows@linaro.org
[PMM: rewritten to store the state in a single s->ctlr uint32,
with the NS register handled as an alias of bit 1 in that value;
added vmstate version bump]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that the GIC base class has state fields for the GICD_IGROUPRn
registers, make kvm_arm_gic_get() and kvm_arm_gic_put() write and
read them. This allows us to remove the check that made us
fail migration if the guest had set any of the group register bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-6-git-send-email-peter.maydell@linaro.org
The Interrupt Group Registers allow the guest to configure interrupts
into one of two groups, where Group0 are higher priority and may
be routed to IRQ or FIQ, and Group1 are lower priority and always
routed to IRQ. (In a GIC with the security extensions Group0 is
Secure interrupts and Group 1 is NonSecure.)
The GICv2 always supports interrupt grouping; the GICv1 does only
if it implements the security extensions.
This patch implements the ability to read and write the registers;
the actual functionality the bits control will be added in a
subsequent patch.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-5-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-7-git-send-email-greg.bellows@linaro.org
[PMM: bring GIC_*_GROUP macros into line with the others, ie a
simple SET/CLEAR/TEST rather than GROUP0/GROUP1;
utility gic_has_groups() function;
minor style fixes;
bump vmstate version]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch the GIC's MMIO callback functions to the read_with_attrs
and write_with_attrs functions which provide MemTxAttrs. This will
allow the GIC to correctly handle secure and nonsecure register
accesses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1430502643-25909-4-git-send-email-peter.maydell@linaro.org
Add a QOM property which allows the GIC Security Extensions to be
enabled. These are an optional part of the GICv1 and GICv2 architecture.
This commit just adds the property and some sanity checks that it
is only enabled on GIC revisions that support it.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-3-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-5-git-send-email-greg.bellows@linaro.org
[PMM: changed property name, added checks that it isn't set for
older GIC revisions or if using the KVM VGIC; reworded commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create the outbound FIQ lines from the GIC to the CPUs; these are
used if the GIC has security extensions or grouping support.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-2-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-2-git-send-email-greg.bellows@linaro.org
[PMM: added FIQ lines to kvm-arm-gic so its interface is the same;
tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only valid BlockBackend to pass to sd_reset() is the one for
the SD card, which is sd->blk. Drop the second argument from this
function in favour of having it just use sd->blk.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1430683444-9797-1-git-send-email-peter.maydell@linaro.org
Consider the following pseudo code to configure SYSTICK (The
recommended programming sequence from "the definitive guide to the
arm cortex-m3"):
SYSTICK Reload Value Register = 0xffff
SYSTICK Current Value Register = 0
SYSTICK Control and Status Register = 0x7
The pseudo code "SYSTICK Current Value Register = 0" leads to invoking
systick_reload(). As a consequence, the systick.tick member is updated
and the systick timer starts to count down when the ENABLE bit of
SYSTICK Control and Status Register is cleared.
The worst case is that: during the system initialization, the reset
value of the SYSTICK Control and Status Register is 0x00000000.
When the code "SYSTICK Current Value Register = 0" is executed, the
systick.tick member is accumulated with "(s->systick.reload + 1) *
systick_scale(s)". The systick_scale() gets the external_ref_clock
scale because the CLKSOURCE bit of the SYSTICK Control and Status
Register is cleared. This is the incorrect behavior because of the
code "SYSTICK Control and Status Register = 0x7". Actually, we want
the processor clock instead of the external reference clock.
This incorrect behavior defers the generation of the first interrupt.
The patch fixes the above-mentioned issue by setting the systick.tick
member and modifying the systick timer only if the ENABLE bit of
the SYSTICK Control and Status Register is set.
In addition, the Cortex-M3 Devices Generic User Guide mentioned that
"When ENABLE is set to 1, the counter loads the RELOAD value from the
SYST RVR register and then counts down". This patch adheres to the
statement of the user guide.
Signed-off-by: Adrian Huang <adrianhuang0701@gmail.com>
Reviewed-by: Jim Huang <jserv.tw@gmail.com>
[PMM: minor tweak to comment text]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Memory hot-unplug support for pc, MSI-X
mapping update speedup for virtio-pci,
misc refactorings and bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVUFj/AAoJECgfDbjSjVRpteQH+gKoOMKilM6qvgdQS9vduFJ+
lDHNnmfgzWjVMEetiUOc9hImfEEyTyDFrkSI3wf4a8RZ7UnnDKD8hZR1nToySJPd
SuDP/EdtXYtInIMjc1MUUrJEP6qtjjgM+IbikVzHDxCeekrTMFz2w05MZ+V+hxI5
8b8ndPNfjX3ciIRjHKZ2u6hKEemhzxr1yyKTnJVGDN07hmfMbCyLsiWnFfShZwfv
g7USgiXjFfpvU5Q7QWpiCapfAaEpevRqieGzRjSbPy5Frm3XT7v+hWbFnvIJqUPj
5/SMV8I4qtKQe15Qah292HB//oaFM/AvRtHWvQkre3YIqFwyCYimQtjqoRCYC1E=
=x0ub
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, virtio enhancements
Memory hot-unplug support for pc, MSI-X
mapping update speedup for virtio-pci,
misc refactorings and bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon May 11 08:23:43 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
acpi: update expected files for memory unplug
virtio-scsi: Move DEFINE_VIRTIO_SCSI_FEATURES to virtio-scsi
virtio-net: Move DEFINE_VIRTIO_NET_FEATURES to virtio-net
pci: Merge pci_nic_init() into pci_nic_init_nofail()
acpi: add a missing backslash to the \_SB scope.
qmp-event: add event notification for memory hot unplug error
acpi: add hardware implementation for memory hot unplug
acpi: fix "Memory device control fields" register
acpi: extend aml_field() to support UpdateRule
acpi, mem-hotplug: add unplug cb for memory device
acpi, mem-hotplug: add unplug request cb for memory device
acpi, mem-hotplug: add acpi_memory_slot_status() to get MemStatus
docs: update documentation for memory hot unplug
virtio: coding style tweak
pci: remove hard-coded bar size in msix_init_exclusive_bar()
virtio-pci: speedup MSI-X masking and unmasking
virtio: introduce vector to virtqueues mapping
virtio-ccw: using VIRTIO_NO_VECTOR instead of 0 for invalid virtqueue
monitor: check return value of qemu_find_net_clients_except()
monitor: replace the magic number 255 with MAX_QUEUE_NUM
...
Conflicts:
hw/s390x/s390-virtio-bus.c
[PMM: fixed conflict in s390_virtio_scsi_properties and
s390_virtio_net_properties arrays; since the result of the
two conflicting patches is to empty the property arrays
completely, the conflict resolution is to remove them entirely.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1426306173-24884-3-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- two improvements to "info mtere" from Gerd
- KVM support for memory transaction attributes
- one more small step towards unlocked MMIO dispatch
- one piece of the qemu-nbd errno fixes
- trivial-ish patches from Denis and Thomas
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVTLBhAAoJEL/70l94x66DkGIH/jlNJBMBGhlH/lwb1LzxtAMX
OxyDxsiwJpSxsOiZiY3oRz7d6VV6TCrmx5L+1HgG5IzU3WC61Tq6/FK4EXLepZIH
GSYlLtAALWny+2Uwsyh1Z7MMr5yxyhgeORk/l7O8pncmMeysludbEaJqQg8Aa9A2
j0B2pv4tvcl/qhuIFXL1YlbYMVXMsZy5W65D8jq+B6qf3q8kUcdKvgvbUMrxAiSH
JMISo4Z32t9w8SGnhlBa9s4HfN2yOvULRAozzkDBAu4c41cZrw16lvTV8XotamnU
LrG6eQ+2PFeIrcGhuIu7z5Bi4yiRRiThfRLCAvVApVTQYUf7IwvPNa5K1FrP9YU=
=Z/UD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- build bugfix from Fam and new configure check from Emilio
- two improvements to "info mtere" from Gerd
- KVM support for memory transaction attributes
- one more small step towards unlocked MMIO dispatch
- one piece of the qemu-nbd errno fixes
- trivial-ish patches from Denis and Thomas
# gpg: Signature made Fri May 8 13:47:29 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
qemu-nbd: only send a limited number of errno codes on the wire
rules.mak: Force CFLAGS for all objects in DSO
configure: require __thread support
exec: move rcu_read_lock/unlock to address_space_translate callers
kvm: add support for memory transaction attributes
mtree: also print disabled regions
mtree: tag & indent a bit better
apic_common: improve readability of apic_reset_common
kvm: Silence warning from valgrind
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Value from xfer->packet.ep is assigned to ep here, but that
stored value is not used before it is overwritten. Remove it.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
... and the status register should say so.
Fixes "usbus0: controller did not stop" error printed by freebsd.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When x-root property not be configured, will cause segfault
because of null pointer accessing. Add a check for s->root
property avoid segfault.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When we find a IOC bit set on a setup trb and therefore queue an event,
that should not stop events being generated for following data trbs.
So clear the 'reported' flag.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This makes xhci generate multiple short packet events in case of
multi-trb transfers. Which is wrong. We need to fix this in a
different way.
This reverts commit aa6857891d.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The dev->config pointer isn't set until guest
system initializes usb devices (via
usb_desc_set_config). However qemu networking can
go through some motions prior to that, e.g.:
#0 is_rndis (s=0x555557261970) at hw/usb/dev-network.c:653
#1 0x000055555585f723 in usbnet_can_receive (nc=0x55555641e820) at hw/usb/dev-network.c:1315
#2 0x000055555587635e in qemu_can_send_packet (sender=0x5555572660a0) at net/net.c:470
#3 0x0000555555878e34 in net_hub_port_can_receive (nc=0x5555562d7800) at net/hub.c:101
#4 0x000055555587635e in qemu_can_send_packet (sender=0x5555562d7980) at net/net.c:470
#5 0x000055555587dbca in tap_can_send (opaque=0x5555562d7980) at net/tap.c:172
The command to reproduce most reliably was:
qemu-system-i386 -usb -device usb-net,vlan=0 -net tap,vlan=0
This wasn't strictly a problem with tap. Other
networking endpoints (vde, user) could trigger
this problem as well.
Fixes: https://bugs.launchpad.net/qemu/+bug/1050823
Cc: qemu-stable@nongnu.org
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Let's move operations that are only valid after the backend has been
realized to a ->device_plugged callback, just as virtio-pci does.
Also reorder setting up the host feature bits to the sequence used
by virtio-pci.
While we're at it, also add a ->device_unplugged callback to stop
ioeventfd, just to be on the safe side.
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <1429627016-30656-3-git-send-email-cornelia.huck@de.ibm.com>
virtio-ccw has an odd sequence of realizing devices: first the
device-specific relization (net, block, ...), then the generic
realization. It feels less odd to have the generic realization
callback trigger the device-specific realization instead (and this
also matches what virtio-pci does).
One thing to note: We need to defer initializing the cu model in the
sense id data until after the device-specific realization has been
performed, as we need to refer to the virtio device's device_id.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <1429627016-30656-2-git-send-email-cornelia.huck@de.ibm.com>
The old s390-virtio transport clears the vring used/avail indices in
the shared area on reset. When we enabled event_idx for virtio-blk, we
noticed that this is not enough: We also need to clear the published
used/avail event indices, or reboot will fail.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We used to avoid enabling event_idx for virtio-blk devices via
s390-virtio, but we now have a workaround in place for guests trying
to use the device before setting DRIVER_OK. Therefore, let's add
DEFINE_VIRTIO_COMMON_FEATURES to the base device so all devices get
those common features - and make s390-virtio use the same mechanism
as the other transports do.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Feature updates are not a synchronuous operation for the legacy
s390-virtio transport. This transport syncs the guest feature bits
(those from finalize) on the set_status hypercall. Before that qemu
thinks that features are zero, which means QEMU will misbehave, e.g.
it will not write the event index, even if the guest asks for it.
Let's detect the case where a kick happens before the driver is ready
and force sync the features.
With this workaround, it is now safe to switch to the common feature
bit handling code as used by all other transports.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
A future patch will be using a 'name':{dictionary} entry in the
QAPI schema to specify a default value for an optional argument
(see previous commit message for more details why); but existing
use of inline nested structs conflicts with that goal. This patch
fixes one of only two commands relying on nested types, by
breaking the nesting into an explicit type; it means that the
type is now boxed instead of unboxed in C code, but the QMP wire
format is unaffected by this change.
Prefer the safer g_new0() while making the conversion, and reduce
some long lines.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Once address_space_translate will be called outside the BQL, the returned
MemoryRegion might disappear as soon as the RCU read-side critical section
ends. Avoid this by moving the critical section to the callers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1426684909-95030-3-git-send-email-pbonzini@redhat.com>
Replace call of cpu_is_bsp(s->cpu) which really returns
!!(s->apicbase & MSR_IA32_APICBASE_BSP)
with directly collected value. Due to this the tracepoint
trace_cpu_get_apic_base((uint64_t)s->apicbase);
will not be hit anymore in apic_reset_common.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Andreas Färber <afaerber@suse.de>
CC: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1428414832-3104-1-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows seems to send two separate calls to NVMe controller configuration. The
first sends configuration info and the second the enable bit. I couldn't
enable the Windows 8.1 in-box NVMe driver with base Qemu. I made the
following change to store the configuration data and then handle enable and
NVMe driver works on Windows 8.1.
I am not a Windows expert and I'm not entirely sure this is the correct
approach. I'm offering it for anyone who wishes to use NVMe on Windows 8.1
using Qemu.
I have tested this change with Linux and Windows guests with NVMe devices.
Signed-off-by: Daniel Stekloff <dan@wendan.org>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- some cleanup patches
- sort most of the s390x devices into categories
- support for the new STSI post handler, used to insert vm name and
friends
- support for the new MEM_OP ioctl (including access register mode)
for accessing guest memory
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=z0Lu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20150430' into staging
First pile of s390x patches for 2.4, including:
- some cleanup patches
- sort most of the s390x devices into categories
- support for the new STSI post handler, used to insert vm name and
friends
- support for the new MEM_OP ioctl (including access register mode)
for accessing guest memory
# gpg: Signature made Thu Apr 30 12:56:58 2015 BST using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
* remotes/cohuck/tags/s390x-20150430:
kvm: better advice for failed s390x startup
s390x/kvm: Support access register mode for KVM_S390_MEM_OP ioctl
s390x/mmu: Use ioctl for reading and writing from/to guest memory
s390x/kvm: Put vm name, extended name and UUID into STSI322 SYSIB
linux-headers: update
s390x/mmu: Use access type definitions instead of magic values
s390x/ipl: sort into categories
sclp: sort into categories
s390-virtio: sort into categories
virtio-ccw: sort into categories
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When not assign a -dtb argument, the variable dtb_filename
storage returned from qemu_find_file(), which should be freed
after use. Alternatively we define a local variable filename,
with 'char *' type, free after use.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Coveristy reports that variable prom_buf/params_buf going
out of scope leaks the storage it points to.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Delete set_usb_string(), usb_ep_get_ifnum(), usb_ep_get_max_packet_size()
usb_ep_get_max_streams() and usb_ep_set_pipeline() since they are
not used anymore.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The function ich9_d2pbr_init() is completely unused and
thus can be deleted.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The function is not used anymore and thus can be deleted.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Cc: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
All of them were reported by codespell.
Most typos are in comments, one is in an error message.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Modify DPRINTF to always enable -Wformat checking.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cast 64bit variables to int when used in DPRINTF. They only contain
32bit of data.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Access register mode is one of the modes that control dynamic address
translation. In this mode the address space is specified by values of
the access registers. The effective address-space-control element is
obtained from the result of the access register translation. See
the "Access-Register Introduction" section of the chapter 5 "Program
Execution" in "Principles of Operations" for more details.
When the CPU is in AR mode, the s390_cpu_virt_mem_rw() function must
know which access register number to use for address translation.
This patch does several things:
- add new parameter 'uint8_t ar' to that function
- decode ar number from intercepted instructions
- pass the ar number to s390_cpu_virt_mem_rw(), which in turn passes it
to the KVM_S390_MEM_OP ioctl.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The s390 ipl device has no real home (it's not really a storage device),
so let's sort it into the misc category.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
