* config/tc-mips.c (append_insn): Make sure DWARF-2 location
information is properly adjusted for branches that get swapped.
gas/testsuite/
* gas/mips/loc-swap.d: New test case for DWARF-2 location with
branch swapping.
* gas/mips/loc-swap-dis.d: Likewise.
* gas/mips/mips16@loc-swap.d: Likewise, MIPS16 version.
* gas/mips/mips16@loc-swap-dis.d: Likewise.
* gas/mips/loc-swap.s: Source for the new tests.
* gas/mips/mips.exp: Run the new tests.
* gas/arm/addthumb2err.d: Test control file.
* gas/arm/addthumb2err.l: Expected error messages.
* config/tc-arm.c (do_t_add_sub): Only allow LSL shifts of less
than 4 in Thumb mode.
* config/tc-mips.c (append_method): New enum.
(can_swap_branch_p, get_append_method): New functions.
(append_insn): Use get_append_method to decide how the instruction
should be added.
* config/tc-alpha.c (alpha_evax_proc_hash): Remove.
(alpha_evax_proc_data): New variable.
(s_alpha_ent): Prevent nested function. Remove has_insert call.
(s_alpha_pdesc): Do not call demand_empty_rest_of_line in case of
error. Do not search in the hash table. Check if match with .ent.
(s_alpha_name): Remove unused variable.
(md_begin): Remove initialization of alpha_evax_proc_hash.
* config/tc-alpha.c (add_to_link_pool): Remove basesym parameter.
Locally declare basesym. Add comments. Do not set literal_pool_size.
(load_expression): Adjust call to add_to_link_pool.
(s_alpha_pdesc): Define pdesc symbol using dot.
Do not set literal_pool_size.
(s_alpha_end): Use NULL instead of 0.
* config/tc-mips.c (fix_24k_record_store_info): If the previous
instruction was a store, and the next instructions are unknown,
assume the worst.
gas/testsuite/
* gas/mips/24k-branch-delay-1.d: Do not allow stores to be put
into delay slots.
* gas/mips/24k-triple-stores-1.d: Put the first nop after the
second store, rather than the first.
* gas/mips/24k-triple-stores-2.d: Likewise.
* gas/mips/24k-triple-stores-4.d: Likewise.
* gas/mips/24k-triple-stores-8.d: Likewise.
* gas/mips/24k-triple-stores-3.d: Remove first nop.
* gas/mips/24k-triple-stores-5.d: Likewise.
* gas/mips/24k-triple-stores-6.d: Likewise.
* gas/mips/24k-triple-stores-7.d: Likewise.
* gas/mips/24k-triple-stores-9.d: Add a nop after the second store.
Expect a nop at the end.
* gas/mips/24k-triple-stores-10.d: Put the first nop after the
second store, rather than the first. Expect a nop at the end.
PR gas/12915
* config/tc-mips.c (append_insn): Only consider hazards between the
pre-noreorder block and ip.
gas/testsuite/
* gas/mips/pr12915.s, gas/mips/pr12915.d: New test.
* gas/mips/mips.exp: Run it.
* gas/config/tc-arm.c (vfp_conv): Add check on range of immediate operand
in vcvt instruction between floating-point and fixed-point.
(operand_parse_code): Add "OP_oI32z".
(parse_operands): OP_oI32z case added.
* gas/testsuite/gas/arm/vcvt-bad.d: New test.
* gas/testsuite/gas/arm/vcvt-bad.l: Likewise.
* gas/testsuite/gas/arm/vcvt-bad.s: Likewise.
* gas/testsuite/gas/arm/vcvt.d: Likewise.
* gas/testsuite/gas/arm/vcvt.s: Likewise.
2011-06-14 Tristan Gingold <gingold@adacore.com>
* config/tc-ppc.h (struct ppc_tc_sy): Complete comment on within.
(tc_new_dot_label): Define.
(ppc_new_dot_label): Declare.
* config/tc-ppc.c (ppc_frob_label): Set within target field.
(ppc_fix_adjustable): Use this field to adjust the reloc.
(ppc_new_dot_label): New function.
gas/testsuite/
2011-06-14 Tristan Gingold <gingold@adacore.com>
* gas/ppc/test1xcoff32.d: Adjust for csect anchor.
* gas/arm/shift-bad.s: New test.
* gas/arm/shift-bad.l: Expcted error output.
* gas/arm/shift-bad.s: New control file.
* config/tc-arm.c (do_shift): Do not allow shift operations at the
end of a register based shift insn.
(do_t_shift): Likewise.
* config/tc-cr16.c (tc_gen_reloc): Remove unused local variable
code.
(check_cinv_options): Remove unused local variables. Make
function void.
(md_assemble): Remove unused local variable.
emitting ELF object.
(md_show_usage): Only mention --pic if the assembler can generate
ELF objects.
* doc/c-cris.texi (CRIS-Opt): Mention that generating ELF is a
prerequisite for --pic being a valid option.
Use throughout in place of #if SUPPORT_FRAME_LINKONCE.
(struct fde_entry): Rename cseg to cur_seg.
(cfi_change_reg_numbers): Remove ATTRIBUTE_UNUSED.
(get_cfi_seg): Likewise. Use if (SUPPORT_FRAME_LINKONCE) rather
that #if SUPPORT_FRAME_LINKONCE.
(cfi_finish): Likewise.
file to conditionally compile code added 2011-04-26.
(cfi_change_reg_numbers): Add ATTRIBUTE_UNUSED on params only used
when SUPPORT_FRAME_LINKONCE.
(get_cfi_seg): Likewise. Reintroduce old code for when not
SUPPORT_FRAME_LINKONCE.
(cfi_finish): Move get_cfi_seg calls out of loop when not
SUPPORT_FRAME_LINKONCE. Avoid unused var warning.
(dwcfi_hash): New static hash variable.
(get_debugseg_name): New.
(alloc_debugseg_item): New.
(make_debug_seg): New.
(dwcfi_hash_insert): New.
(dwcfi_hash_find): New.
(dwcfi_hash_find_or_make): New.
(cfi_insn_data): New member cur_seg.
(cie_entry): Likewise.
(fde_entry): New cseg and handled members.
(alloc_fde_entry): Initialize cseg member.
(alloc_cfi_insn_data): Initialize cur_seg member.
(dot_cfi_sections): Compare for beginning of
section names via strncmp.
(get_cfi_seg): New.
(cfi_finish): Treat link-once sections.
(is_now_linkonce_segment): New local helper.
(output_cie): Ignore cie entries not member of current
segment.
(output_fde): Likewise.
(select_cie_for_fde): Likewise.
(cfi_change_reg_numbers): Add new argument for current segment
and ignore insn elements, if not part of current segment.
* ehopt.c (get_cie_info): Use strncmp for
section name matching.
(heck_eh_frame): Likewise.
* coffcode.h (sec_to_styp_flags): Allow linkonce for
debugging sections.
* scripttempl/pe.sc: Handle .eh_frame($|.)* sections.
* scripttempl/pep.sc: Likewise.
* ld-pe/pe.exp: Add cfi/cfi32 tests.
* ld-pe/cfi.d: New.
* ld-pe/cfi32.d: New.
* ld-pe/cfia.s: New.
* ld-pe/cfib.s: New.
* hash.c (bfd_default_hash_table_size): Make it an unsigned long.
(bfd_hash_table_init_n): Overflow checking.
(bfd_hash_set_default_size): Return current size. Take unsigned long
arg. Add 65537 to hash_size primes.
* bfd-in.h (bfd_hash_set_default_size): Update prototype.
* bfd-in2.h: Regenerate.
gas/
* hash.c (set_gas_hash_table_size): Use bfd_hash_set_default_size.
(hash_new_sized): New function, split out from..
(hash_new): ..here.
ld/
* ld.h (ld_config_type <hash_table_size>): Make it an unsigned long.
* config/tc-s390.c (s390_machine): New prototype.
(md_pseudo_table): New pseudo-op .machine.
(s390_opcode_hash): Initialize to NULL.
(s390_parse_cpu): New function.
(md_parse_option): Use s390_parse_cpu.
(s390_setup_opcodes): New function.
(md_begin): Use s390_setup_opcodes.
(s390_machine): New hook handling the new .machine pseudo.
* doc/c-s390.texi: Document the new pseudo op .machine.
2011-04-14 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* gas/s390/zarch-machine.s: New testcase.
* gas/s390/zarch-machine.d: New testcase output.
* gas/s390/s390.exp: Execute the new testcase.
* tic6x.h (R_C6000_JUMP_SPLOT, R_C6000_EHTYPE,
R_C6000_PCR_H16, R_C6000_PCR_L16): New relocs.
(SHN_TIC6X_SCOMMON): Define.
bfd/
* elf32-tic6x.h (struct elf32_tic6x_params): New.
(elf32_tic6x_setup): Declare.
* elf32-tic6x.c: Include <limits.h>.
(ELF_DYNAMIC_LINKER, DEFAULT_STACK_SIZE, PLT_ENTRY_SIZE): Define.
(struct elf32_tic6x_link_hash_table, struct elf32_link_hash_entry):
New structures.
(elf32_tic6x_link_hash_table, is_tic6x_elf): New macros.
(tic6x_elf_scom_section, tic6x_elf_scom_symbol,
tic6x_elf_scom_symbol_ptr): New static variables.
(elf32_tic6x_howto_table, elf32_tic6x_howto_table_rel,
elf32_tic6x_reloc_map): Add R_C6000_JUMP_SLOT, R_C6000_EHTYPE,
R_C6000_PCR_H16 and R_C6000_PCR_L16.
(elf32_tic6x_link_hash_newfunc, elf32_tic6x_link_hash_table_create,
elf32_tic6x_link_hash_table_free, elf32_tic6x_setup,
elf32_tic6x_using_dsbt, elf32_tic6x_install_rela,
elf32_tic6x_create_dynamic_sections, elf32_tic6x_make_got_dynreloc,
elf32_tic6x_finish_dynamic_symbol, elf32_tic6x_gc_sweep_hook,
elf32_tic6x_adjust_dynamic_symbol): New static functions.
(elf32_tic6x_relocate_section): For R_C6000_PCR_S21, convert branches
to weak symbols as required by the ABI.
Handle GOT and DSBT_INDEX relocs, and copy relocs to the output file
as needed when generating DSBT output.
(elf32_tic6x_check_relocs, elf32_tic6x_add_symbol_hook,
elf32_tic6x_symbol_processing, elf32_tic6x_section_from_bfd_section,
elf32_tic6x_allocate_dynrelocs, elf32_tic6x_size_dynamic_sections,
elf32_tic6x_always_size_sections, elf32_tic6x_modify_program_headers,
elf32_tic6x_finish_dynamic_sections, elf32_tic6x_plt_sym_val,
elf32_tic6x_copy_private_data, elf32_tic6x_link_omit_section_dynsym):
New static functions.
(ELF_MAXPAGESIZE): Define to 0x1000.
(bfd_elf32_bfd_copy_private_bfd_data,
bfd_elf32_bfd_link_hash_table_create,
bfd_elf32_bfd_link_hash_table_free, elf_backend_can_refcount,
elf_backend_want_got_plt, elf_backend_want_dynbss,
elf_backend_plt_readonly, elf_backend_got_header_size,
elf_backend_gc_sweep_hook, elf_backend_modify_program_headers,
elf_backend_create_dynamic_sections, elf_backend_adjust_dynamic_symbol,
elf_backend_check_relocs, elf_backend_add_symbol_hook,
elf_backend_symbol_processing, elf_backend_link_output_symbol_hook,
elf_backend_section_from_bfd_section,
elf_backend_finish_dynamic_symbol, elf_backend_always_size_sections,
elf32_tic6x_size_dynamic_sections, elf_backend_finish_dynamic_sections,
elf_backend_omit_section_dynsym, elf_backend_plt_sym_val): Define.
* bfd/reloc.c (BFD_RELOC_C6000_JUMP_SLOT, BFD_RELOC_C6000_EHTYPE,
BFD_RELOC_C6000_PCR_H16, BFD_RELOC_C6000_PCR_S16): Add.
* bfd/bfd-in2.h: Regenerate.
* bfd/libbfd.h: Regenerate.
* config.bfd: Accept tic6x-*-* instead of tic6x-*-elf.
gas/
* config/tc-tic6x.c (sbss_section, scom_section, scom_symbol): New
static variables.
(md_begin): Initialize them.
(s_tic6x_scomm): New static function.
(md_pseudo_table): Add "scomm".
(tc_gen_reloc): Really undo all adjustments made by
bfd_install_relocation.
* doc/c-tic6x.texi: Document the .scomm directive.
gas/testsuite/
* gas/tic6x/scomm-directive-1.s: New test.
* gas/tic6x/scomm-directive-1.d: New test.
* gas/tic6x/scomm-directive-2.s: New test.
* gas/tic6x/scomm-directive-2.d: New test.
* gas/tic6x/scomm-directive-3.s: New test.
* gas/tic6x/scomm-directive-3.d: New test.
* gas/tic6x/scomm-directive-4.s: New test.
* gas/tic6x/scomm-directive-4.d: New test.
* gas/tic6x/scomm-directive-5.s: New test.
* gas/tic6x/scomm-directive-5.d: New test.
* gas/tic6x/scomm-directive-6.s: New test.
* gas/tic6x/scomm-directive-6.d: New test.
* gas/tic6x/scomm-directive-7.s: New test.
* gas/tic6x/scomm-directive-7.d: New test.
* gas/tic6x/scomm-directive-8.s: New test.
* gas/tic6x/scomm-directive-8.d: New test.
ld/
* emulparams/elf32_tic6x_le.sh (BIG_OUTPUT_FORMAT, EXTRA_EM_FILE,
GENERATE_SHLIB_SCRIPT): New defines.
(TEXT_START_ADDR): Define differently depending on target.
(.got): Redefine to include "*(.dsbt)".
(SDATA_START_SYMBOLS): Remove, replace with
(OTHER_GOT_SYMBOLS): New.
(OTHER_BSS_SECTIONS): Define only for ELF targets.
* emultempl/tic6xdsbt.em: New file.
* gen-doc.texi: Set C6X.
* ld.texinfo: Likewise.
(Options specific to C6X uClinux targets): New section.
binutils/
* readelf.c (get_symbol_index_type): Handle SCOM for TIC6X.
(dump_relocations): Likewise.
binutils/testsuite/
* lib/binutils-common.exp (is_elf_format): Accept tic6x*-*-uclinux*.
ld/testsuite/
* ld-scripts/crossref.exp: Add CFLAGS for tic6x*-*-*.
* ld-elf/sec-to-seg.exp: Remove tic6x from list of targets defining
pagesize to 1.
* ld-tic6x/tic6x.exp: Add support for DSBT shared library/executable
linking tests.
* ld-tic6x/dsbt.ld: New linker script.
* ld-tic6x/dsbt-be.ld: New linker script.
* ld-tic6x/dsbt-overflow.ld: New linker script.
* ld-tic6x/dsbt-inrange.ld: New linker script.
* ld-tic6x/shlib-1.s: New test.
* ld-tic6x/shlib-2.s: New test.
* ld-tic6x/shlib-app-1r.s: New test.
* ld-tic6x/shlib-app-1.s: New test.
* ld-tic6x/shlib-1.sd: New test.
* ld-tic6x/shlib-1.dd: New test.
* ld-tic6x/shlib-app-1.rd: New test.
* ld-tic6x/shlib-app-1rb.rd: New test.
* ld-tic6x/shlib-app-1.sd: New test.
* ld-tic6x/static-app-1rb.od: New test.
* ld-tic6x/shlib-app-1.dd: New test.
* ld-tic6x/shlib-app-1rb.sd: New test.
* ld-tic6x/static-app-1b.od: New test.
* ld-tic6x/static-app-1r.od: New test.
* ld-tic6x/shlib-1rb.rd: New test.
* ld-tic6x/shlib-app-1rb.dd: New test.
* ld-tic6x/shlib-1rb.sd: New test.
* ld-tic6x/shlib-1rb.dd: New test.
* ld-tic6x/shlib-app-1b.od: New test.
* ld-tic6x/tic6x.exp: New test.
* ld-tic6x/static-app-1rb.rd: New test.
* ld-tic6x/shlib-app-1r.od: New test.
* ld-tic6x/static-app-1.od: New test.
* ld-tic6x/static-app-1b.rd: New test.
* ld-tic6x/static-app-1r.rd: New test.
* ld-tic6x/static-app-1rb.sd: New test.
* ld-tic6x/static-app-1b.sd: New test.
* ld-tic6x/static-app-1rb.dd: New test.
* ld-tic6x/static-app-1r.sd: New test.
* ld-tic6x/static-app-1b.dd: New test.
* ld-tic6x/shlib-1b.rd: New test.
* ld-tic6x/static-app-1r.dd: New test.
* ld-tic6x/shlib-app-1b.rd: New test.
* ld-tic6x/shlib-1r.rd: New test.
* ld-tic6x/shlib-app-1r.rd: New test.
* ld-tic6x/shlib-1b.sd: New test.
* ld-tic6x/static-app-1.rd: New test.
* ld-tic6x/shlib-app-1b.sd: New test.
* ld-tic6x/shlib-1r.sd: New test.
* ld-tic6x/shlib-1b.dd: New test.
* ld-tic6x/shlib-app-1r.sd: New test.
* ld-tic6x/shlib-app-1b.dd: New test.
* ld-tic6x/shlib-1r.dd: New test.
* ld-tic6x/static-app-1.sd: New test.
* ld-tic6x/shlib-app-1r.dd: New test.
* ld-tic6x/static-app-1.dd: New test.
* ld-tic6x/shlib-noindex.rd: New test.
* ld-tic6x/shlib-noindex.dd: New test.
* ld-tic6x/shlib-noindex.sd: New test.
* ld-tic6x/got-reloc-local-1.s: New test.
* ld-tic6x/got-reloc-local-2.s: New test.
* ld-tic6x/got-reloc-local-r.d: New test.
* ld-tic6x/got-reloc-global.s: New test.
* ld-tic6x/got-reloc-global-addend-1.d: New test.
* ld-tic6x/got-reloc-global-addend-1.s: New test.
* ld-tic6x/got-reloc-global-addend-2.d: New test.
* ld-tic6x/got-reloc-inrange.d: New test.
* ld-tic6x/got-reloc-overflow.d: New test.
* ld-tic6x/got-reloc-global-addend-2.s: New test.
* ld-tic6x/dsbt-index-error.d: New test.
* ld-tic6x/dsbt-index.d: New test.
* ld-tic6x/dsbt-index.s: New test.
* ld-tic6x/shlib-app-1.od: New test.
* ld-tic6x/shlib-app-1rb.od: New test.
* ld-tic6x/shlib-1.rd: New test.
* ld-tic6x/weak.d: New test.
* ld-tic6x/weak-be.d: New test.
* ld-tic6x/weak.s: New test.
* ld-tic6x/weak-data.d: New test.
* ld-tic6x/common.d: New test.
* ld-tic6x/common.ld: New test.
* ld-tic6x/common.s: New test.
* config/tc-ppc.c (ppc_frob_symbol): Convert stsym symbols value
to offset only if within is set.
(ppc_stabx): Reformat. For stsym stabs, add a check and set
within only for symbols.
The destination registers must be different with BYTEUNPACK insns,
otherwise the hardware throws up an exception. So reject them.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The destination registers must be different with BYTEOP16M insns,
otherwise the hardware throws up an exception. So reject them.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The destination registers must be different with BYTEOP16P insns,
otherwise the hardware throws up an exception. So reject them.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The 16bit acc add insn cannot assign the two results to the same dreg,
so make sure gas rejects attempts to use this insn variant.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The destination registers with vector add/sub insns must be different,
so make sure gas rejects attempt to write these.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
While we were catching a few mismatches in vectorized dsp mult insns,
the error we displayed was misleading. Once we fix that up, we can
convert previously dead code into proper checking for destination
dreg matching.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The destination registers for SEARCH cannot be the same. Same rule
for the source registers for BITMUX.
Signed-off-by: Mike Frsyinger <vapier@gentoo.org>
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* archures.c: Add AVR XMEGA architecture information.
* cpu-avr.c (arch_info_struct): Likewise.
* elf32-avr.c (bfd_elf_avr_final_write_processing): Likewise.
(elf32_avr_object_p): Likewise.
/gas:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (struct avr_opcodes_s): Add opcode field.
(AVR_INSN): Change definition to match.
(avr_opcodes): Likewise, change to match.
(mcu_types): Add XMEGA architecture names and new XMEGA device names.
(md_show_usage): Add XMEGA architecture names.
(avr_operand): Add 'E' constraint for DES instruction of XMEGA devices.
Add support for SPM Z+ instruction.
* doc/c-avr.texi: Add documentation for XMEGA architectures and
devices.
/include/opcode:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* avr.h (AVR_ISA_SPMX,AVR_ISA_DES,AVR_ISA_M256,AVR_ISA_XMEGA):
New instruction set flags.
(AVR_INSN): Add new instructions for SPM Z+, DES for XMEGA.
/ld:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* Makefile.am (ALL_EMULATION_SOURCES): Add AVR XMEGA architectures.
(eavrxmega?.c): Likewise.
* configure.tgt (targ_extra_emuls): Likewise.
* emulparams/avrxmega1.sh: New file.
* emulparams/avrxmega2.sh: Likewise.
* emulparams/avrxmega3.sh: Likewise.
* emulparams/avrxmega4.sh: Likewise.
* emulparams/avrxmega5.sh: Likewise.
* emulparams/avrxmega6.sh: Likewise.
* emulparams/avrxmega7.sh: Likewise.
* emultempl/avrelf.em (avr_elf_${EMULATION_NAME}_before_allocation):
Add avrxmega6, avrxmega7 to list of architectures for no stubs.
/opcodes:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* avr-dis.c (avr_operand): Add opcode_str parameter. Check for
post-increment to support LPM Z+ instruction. Add support for 'E'
constraint for DES instruction.
(print_insn_avr): Adjust calls to avr_operand. Rename variable.
* arm.h (R_ARM_IRELATIVE): New relocation.
bfd/
* reloc.c (BFD_RELOC_ARM_IRELATIVE): New relocation.
* bfd-in2.h: Regenerate.
* elf32-arm.c (elf32_arm_howto_table_2): Rename existing definition
to elf32_arm_howto_table_3 and replace with a single R_ARM_IRELATIVE
entry.
(elf32_arm_howto_from_type): Update accordingly.
(elf32_arm_reloc_map): Map BFD_RELOC_ARM_IRELATIVE to R_ARM_IRELATIVE.
(elf32_arm_reloc_name_lookup): Handle elf32_arm_howto_table_3.
(arm_plt_info): New structure, split out from elf32_arm_link_hash_entry
with an extra noncall_refcount field.
(arm_local_iplt_info): New structure.
(elf_arm_obj_tdata): Add local_iplt.
(elf32_arm_local_iplt): New accessor macro.
(elf32_arm_link_hash_entry): Replace plt_thumb_refcount,
plt_maybe_thumb_refcount and plt_got_offset with an arm_plt_info.
Change tls_type to a bitfield and add is_iplt.
(elf32_arm_link_hash_newfunc): Update accordingly.
(elf32_arm_allocate_local_sym_info): New function.
(elf32_arm_create_local_iplt): Likewise.
(elf32_arm_get_plt_info): Likewise.
(elf32_arm_plt_needs_thumb_stub_p): Likewise.
(elf32_arm_get_local_dynreloc_list): Likewise.
(create_ifunc_sections): Likewise.
(elf32_arm_copy_indirect_symbol): Update after the changes to
elf32_arm_link_hash_entry. Assert the is_iplt has not yet been set.
(arm_type_of_stub): Add an st_type argument. Use elf32_arm_get_plt_info
to get PLT information. Assert that all STT_GNU_IFUNC references
are turned into PLT references.
(arm_build_one_stub): Pass the symbol type to
elf32_arm_final_link_relocate.
(elf32_arm_size_stubs): Pass the symbol type to arm_type_of_stub.
(elf32_arm_allocate_irelocs): New function.
(elf32_arm_add_dynreloc): In static objects, use .rel.iplt for
all R_ARM_IRELATIVE.
(elf32_arm_allocate_plt_entry): New function.
(elf32_arm_populate_plt_entry): Likewise.
(elf32_arm_final_link_relocate): Add an st_type parameter.
Set srelgot to null for static objects. Use separate variables
to record which st_value and st_type should be used when generating
a dynamic relocation. Use elf32_arm_get_plt_info to find the
symbol's PLT information, setting has_iplt_entry, splt,
plt_offset and gotplt_offset accordingly. Check whether
STT_GNU_IFUNC symbols should resolve to an .iplt entry, and change
the relocation target accordingly. Broaden assert to include
.iplts. Don't set sreloc for static relocations. Assert that
we only generate dynamic R_ARM_RELATIVE relocations for R_ARM_ABS32
and R_ARM_ABS32_NOI. Generate R_ARM_IRELATIVE relocations instead
of R_ARM_RELATIVE relocations if the target is an STT_GNU_IFUNC
symbol. Pass the symbol type to arm_type_of_stub. Conditionally
resolve GOT references to the .igot.plt entry.
(elf32_arm_relocate_section): Update the call to
elf32_arm_final_link_relocate.
(elf32_arm_gc_sweep_hook): Use elf32_arm_get_plt_info to get PLT
information. Treat R_ARM_REL32 and R_ARM_REL32_NOI as call
relocations in shared libraries and relocatable executables.
Count non-call PLT references. Use elf32_arm_get_local_dynreloc_list
to get the list of dynamic relocations for a local symbol.
(elf32_arm_check_relocs): Always create ifunc sections. Set isym
at the same time as setting h. Use elf32_arm_allocate_local_sym_info
to allocate local symbol information. Treat R_ARM_REL32 and
R_ARM_REL32_NOI as call relocations in shared libraries and
relocatable executables. Record PLT information for local
STT_GNU_IFUNC functions as well as global functions. Count
non-call PLT references. Use elf32_arm_get_local_dynreloc_list
to get the list of dynamic relocations for a local symbol.
(elf32_arm_adjust_dynamic_symbol): Handle STT_GNU_IFUNC symbols.
Don't remove STT_GNU_IFUNC PLTs unless all references have been
removed. Update after the changes to elf32_arm_link_hash_entry.
(allocate_dynrelocs_for_symbol): Decide whether STT_GNU_IFUNC PLT
entries should live in .plt or .iplt. Check whether the .igot.plt
and .got entries can be combined. Use elf32_arm_allocate_plt_entry
to allocate .plt and .(i)got.plt entries. Detect which .got
entries will need R_ARM_IRELATIVE relocations and use
elf32_arm_allocate_irelocs to allocate them. Likewise other
non-.got dynamic relocations.
(elf32_arm_size_dynamic_sections): Allocate .iplt, .igot.plt
and dynamic relocations for local STT_GNU_IFUNC symbols.
Check whether the .igot.plt and .got entries can be combined.
Detect which .got entries will need R_ARM_IRELATIVE relocations
and use elf32_arm_allocate_irelocs to allocate them. Use stashed
section pointers intead of strcmp checks. Handle iplt and igotplt.
(elf32_arm_finish_dynamic_symbol): Use elf32_arm_populate_plt_entry
to fill in .plt, .got.plt and .rel(a).plt entries. Point
STT_GNU_IFUNC symbols at an .iplt entry if non-call relocations
resolve to it.
(elf32_arm_output_plt_map_1): New function, split out from
elf32_arm_output_plt_map. Handle .iplt entries. Use
elf32_arm_plt_needs_thumb_stub_p.
(elf32_arm_output_plt_map): Call it.
(elf32_arm_output_arch_local_syms): Add mapping symbols for
local .iplt entries.
(elf32_arm_swap_symbol_in): Handle Thumb STT_GNU_IFUNC symbols.
(elf32_arm_swap_symbol_out): Likewise.
(elf32_arm_add_symbol_hook): New function.
(elf_backend_add_symbol_hook): Define for all targets.
opcodes/
* arm-dis.c (get_sym_code_type): Treat STT_GNU_IFUNCs as code.
gas/
* config/tc-arm.c (md_pcrel_from_section): Use S_FORCE_RELOC to
determine whether a relocation is needed.
(md_apply_fix, arm_apply_sym_value): Likewise.
ld/testsuite/
* ld-arm/ifunc-1.s, ld-arm/ifunc-1.dd, ld-arm/ifunc-1.gd,
ld-arm/ifunc-1.rd, ld-arm/ifunc-2.s, ld-arm/ifunc-2.dd,
ld-arm/ifunc-2.gd, ld-arm/ifunc-2.rd, ld-arm/ifunc-3.s,
ld-arm/ifunc-3.dd, ld-arm/ifunc-3.gd, ld-arm/ifunc-3.rd,
ld-arm/ifunc-4.s, ld-arm/ifunc-4.dd, ld-arm/ifunc-4.gd,
ld-arm/ifunc-4.rd, ld-arm/ifunc-5.s, ld-arm/ifunc-5.dd,
ld-arm/ifunc-5.gd, ld-arm/ifunc-5.rd, ld-arm/ifunc-6.s,
ld-arm/ifunc-6.dd, ld-arm/ifunc-6.gd, ld-arm/ifunc-6.rd,
ld-arm/ifunc-7.s, ld-arm/ifunc-7.dd, ld-arm/ifunc-7.gd,
ld-arm/ifunc-7.rd, ld-arm/ifunc-8.s, ld-arm/ifunc-8.dd,
ld-arm/ifunc-8.gd, ld-arm/ifunc-8.rd, ld-arm/ifunc-9.s,
ld-arm/ifunc-9.dd, ld-arm/ifunc-9.gd, ld-arm/ifunc-9.rd,
ld-arm/ifunc-10.s, ld-arm/ifunc-10.dd, ld-arm/ifunc-10.gd,
ld-arm/ifunc-10.rd, ld-arm/ifunc-11.s, ld-arm/ifunc-11.dd,
ld-arm/ifunc-11.gd, ld-arm/ifunc-11.rd, ld-arm/ifunc-12.s,
ld-arm/ifunc-12.dd, ld-arm/ifunc-12.gd, ld-arm/ifunc-12.rd,
ld-arm/ifunc-13.s, ld-arm/ifunc-13.dd, ld-arm/ifunc-13.gd,
ld-arm/ifunc-13.rd, ld-arm/ifunc-14.s, ld-arm/ifunc-14.dd,
ld-arm/ifunc-14.gd, ld-arm/ifunc-14.rd, ld-arm/ifunc-15.s,
ld-arm/ifunc-15.dd, ld-arm/ifunc-15.gd, ld-arm/ifunc-15.rd,
ld-arm/ifunc-16.s, ld-arm/ifunc-16.dd, ld-arm/ifunc-16.gd,
ld-arm/ifunc-16.rd, ld-arm/ifunc-dynamic.ld,
ld-arm/ifunc-static.ld: New tests.
* ld-arm/farcall-group.d, ld-arm/farcall-group-size2.d,
ld-arm/farcall-mixed-lib-v4t.d, ld-arm/farcall-mixed-lib.d: Update
for new stub hashes.
* ld-arm/arm-elf.exp: Run them.
* internal.h (elf_internal_sym): Add st_target_internal.
* arm.h (arm_st_branch_type): New enum.
(ARM_SYM_BRANCH_TYPE): New macro.
bfd/
* elf-bfd.h (elf_link_hash_entry): Add target_internal.
* elf.c (swap_out_syms): Set st_target_internal for each
Elf_Internal_Sym.
* elfcode.h (elf_swap_symbol_in): Likewise.
* elf32-i370.c (i370_elf_finish_dynamic_sections): Likewise.
* elf32-sh-symbian.c (sh_symbian_relocate_section): Likewise.
* elf64-sparc.c (elf64_sparc_output_arch_syms): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_size_dynamic_sections): Likewise.
* elflink.c (elf_link_output_extsym): Likewise.
(bfd_elf_final_link): Likewise.
(elf_link_add_object_symbols): Copy st_target_internal
to the hash table if we see a definition.
(_bfd_elf_copy_link_hash_symbol_type): Copy target_internal.
* elf32-arm.c (elf32_arm_stub_hash_entry): Replace st_type with
a branch_type field.
(a8_erratum_fix, a8_erratum_reloc): Likewise.
(arm_type_of_stub): Replace actual_st_type with an
actual_branch_type parameter.
(arm_build_one_stub): Use branch types rather than st_types to
determine the type of branch.
(cortex_a8_erratum_scan): Likewise.
(elf32_arm_size_stubs): Likewise.
(bfd_elf32_arm_process_before_allocation): Likewise.
(allocate_dynrelocs_for_symbol): Likewise.
(elf32_arm_finish_dynamic_sections): Likewise.
(elf32_arm_final_link_relocate): Replace sym_flags parameter with
a branch_type parameter.
(elf32_arm_relocate_section): Update call accordingly.
(elf32_arm_adjust_dynamic_symbol): Don't check STT_ARM_TFUNC.
(elf32_arm_output_map_sym): Initialize st_target_internal.
(elf32_arm_output_stub_sym): Likewise.
(elf32_arm_symbol_processing): Delete.
(elf32_arm_swap_symbol_in): Convert STT_ARM_TFUNCs into STT_FUNCs.
Use st_target_internal to record the branch type.
(elf32_arm_swap_symbol_out): Use st_target_internal to test for
Thumb functions.
(elf32_arm_is_function_type): Delete.
(elf_backend_symbol_processing): Likewise.
(elf_backend_is_function_type): Likewise.
gas/
* config/tc-arm.c (arm_adjust_symtab): Set the branch type
for Thumb symbols.
ld/
* emultempl/armelf.em (gld${EMULATION_NAME}_finish): Check
eh->target_internal.
opcodes/
* arm-dis.c (get_sym_code_type): Don't check for STT_ARM_TFUNC.
Use branch types instead.
(print_insn): Likewise.
gas/
2011-03-05 H.J. Lu <hongjiu.lu@intel.com>
* config/obj-elf.c (elf_frob_symbol): Mention symbol name in
non-constant .size expression.
gas/testsuite/
2011-03-05 H.J. Lu <hongjiu.lu@intel.com>
* gas/elf/bad-size.err: Updated.
gas/
2011-03-04 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (x86_cie_stack_alignment): New.
(md_begin): Set x86_cie_data_alignment if it isn't set. Set
x86_cie_stack_alignment.
(i386_target_format): Set x86_cie_data_alignment to -4 for x32.
(tc_x86_frame_initial_instructions): Use x86_cie_stack_alignment
instead of x86_cie_data_alignment on SP and RA.
gas/testsuite/
2011-03-04 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/ilp32/cfi/cfi-x86_64.d: Updated.
* config/tc-mips.c (append_insn): Disable branch relaxation for
DSP instructions.
gas/testsuite/
* gas/mips/relax-bposge.l: New test for DSP branch relaxation.
* gas/mips/relax-bposge.s: Source for the new test.
* gas/mips/mips.exp: Run the new test.
* config/tc-mips.c (RELAX_BRANCH_ENCODE): Encode the temporary
register to use.
(RELAX_BRANCH_UNCOND): Adjust accordingly.
(RELAX_BRANCH_LIKELY): Likewise.
(RELAX_BRANCH_LINK): Likewise.
(RELAX_BRANCH_TOOFAR): Likewise.
(RELAX_BRANCH_AT): New macro.
(append_insn): Encode the temporary register to use in standard
MIPS branch relaxation.
(relaxed_branch_length): Update according to changes to
RELAX_BRANCH_ENCODE.
(md_convert_frag): Use the encoded register as the temporary.
gas/testsuite/
* gas/mips/relax-at.d: New test for branch relaxation with .set
at.
* gas/mips/relax.s: Update to support the new test.
* gas/mips/relax.l: Update accordingly.
* gas/mips/relax.d: Update for multi-arch invocation.
* gas/mips/mips.exp: Run the new test. Adjust to run "relax"
across all applicable architectures.
* config/tc-mips.c (mips_fix_adjustable): On REL targets also
reject PC-relative relocations.
gas/testsuite/
* gas/mips/branch-misc-2.d: Adjust for relocation change.
* gas/mips/branch-misc-2pic.d: Likewise.
* gas/mips/branch-misc-4.d: New test for PC-relative relocation
overflow.
* gas/mips/branch-misc-4-64.d: Likewise.
* gas/mips/branch-misc-4.s: Source for the new tests.
* testsuite/gas/mips/mips.exp: Run the new tests.
Add "op" parameter. Report operator and operand segments in error
message, not operand symbols.
(resolve_symbol_value): Always set segment for equated symbols, not
just when finalizing. Adjust report_op_error calls.
The BYTEOP2M insn was part of the initial Blackfin designs, but never made
it into any actual silicon. So punt support for it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The mmod field is decoded in a few places (gas/opcodes/sim), so move it to
a common place to avoid duplication.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
A bunch of Blackfin-specific directives were lacking info on what they
actually do, so fill in the blanks. Further, the byte2/byte4 descriptions
were swapped.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options.
(Overview <Target PowerPC options>): Add a number of missing options.
* doc/c-ppc.texi: Likewise. Add markup for use in manpage generation.
value when reporting the inability to write to the output file.
* config/tc-rx.c (rx_handle_align): Do not insert NOPs into align
frag that has a non-zero fill value.
* gas/all/align.d: Skip for the RX.
* gas/elf/group1a.d: Likewise.
* gas/elf/groupautoa.d: Likewise.
* gas/elf/elf.exp: Do not run section5 test for the RX port.
* gas/elf/section4.d: Likewise.
* gas/elf/section7.d: Likewise.
* gas/macros/semi.s: Fill with a non-zero pattern.
* gas/macros/semi.d: Expect non-zero fill value.
* gas/rx/bcnd.d: Update expected disassembly.
* gas/rx/bra.d: Likewise.
* gas/rx/macros.inc: Add reg1 macro.
* gas/rx/max.sm: Use reg1 macro to avoid generating illegal NOP
instruction.
* gas/rx/mov.sm: Likewise.
* gas/rx/max.d: Update expected disassembly.
* gas/rx/mov.d: Likewise.
* gas/rx/rx-asm-good.s: Use Renesas section names.
* gas/rx/rx-asm-good.d: Update expected disassembly.
Maciej W. Rozycki
Thomas Schwinge
Nick Clifton
Richard Sandiford
Tristan Gingold
Matthew Gretton-Dann
H.J. Lu
Alan Modra
Richard Earnshaw
Nathan Sidwell
Paul Brook
Andreas Krebbel
Bernd Schmidt
Hans-Peter Nilsson
Quentin Neill
Catherine Moore
Julian Brown
Kai Tietz
Joseph Myers
Richard Henderson
Mike Frysinger
Eric B. Weddington
Michael Snyder
Ralf Wildenhues
DJ Delorie