* config/tc-mips.c (load_register): Add leading "0x" to the
output of sprintf_vma().
(macro): Likewise.
gas/testsuite/:
* gas/mips/ldstla-32-1.l: Update to handle leading zeroes.
* gas/mips/ldstla-32-mips3-1.l: Likewise.
2005-05-27 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (struct proc_pending): New.
(unwind): Replace proc_start with proc_pending.
(unwind_diagnostic): Check unwind.proc_pending.sym.
(dot_proc): Replace unwind.proc_start with unwind.proc_pending.sym.
Check if previous proc not closed. Record all entry points.
(dot_endp): Replace unwind.proc_start with unwind.proc_pending.sym.
Set symbol sizes for entry points recorded in dot_proc. Check
arguments for consistency with respective .proc's.
(md_assemble): Replace unwind.proc_start with
unwind.proc_pending.sym.
gas/testsuite/
2005-05-27 Jan Beulich <jbeulich@novell.com>
* gas/ia64/proc.l: Adjust.
2005-05-25 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.d: Account for 32-bit displacements being shown
in hex.
opcodes/
2005-05-25 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (OP_E): In Intel mode, display 32-bit displacements in
hex (but retain it being displayed as signed). Remove redundant
checks. Add handling of displacements for 16-bit addressing in Intel
mode.
2005-05-19 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (dot_endp): Don't use global symbol for unwind
relocations in unwind section.
gas/testsuite/
2005-05-19 Jan Beulich <jbeulich@novell.com>
* gas/ia64/reloc-uw.s: New.
* gas/ia64/reloc-uw.d: New.
* gas/ia64/reloc-uw-ilp32.d: New.
* gas/ia64/ia64.exp: Run new test.
* arm.h: Import complete list of official relocation names
and numbers from AAELF. Define FAKE_RELOCs for old names.
Remove a few old names no longer used anywhere.
bfd:
* elf32-arm.c: Wherever possible, use official reloc names
from AAELF.
(elf32_arm_howto_table, elf32_arm_tls_gd32_howto)
(elf32_arm_tls_ldo32_howto, elf32_arm_tls_ldm32_howto)
(elf32_arm_tls_le32_howto, elf32_arm_tls_ie32_howto)
(elf32_arm_vtinherit_howto, elf32_arm_vtentry_howto)
(elf32_arm_pc11_howto, elf32_arm_thm_pc9_howto, elf32_arm_got_prel)
(elf32_arm_r_howto): Replace with elf32_arm_howto_table_1,
elf32_arm_howto_table_2, and elf32_arm_howto_table_3.
Add many new relocations from AAELF.
(elf32_arm_howto_from_type): Update to match.
(elf32_arm_reloc_map): Add entries for R_ARM_THM_JUMP24,
R_ARM_THM_JUMP11, R_ARM_THM_JUMP19, R_ARM_THM_JUMP8,
R_ARM_THM_JUMP6, R_ARM_GNU_VTINHERIT, and R_ARM_GNU_VTENTRY.
(elf32_arm_reloc_type_lookup): Use elf32_arm_howto_from_type.
(elf32_arm_final_link_relocate): Add support for
R_ARM_THM_JUMP24, R_ARM_THM_JUMP19, R_ARM_THM_JUMP6. Remove
case entries redundant with default.
* reloc.c: Reorganize ARM relocations. Add Thumb
assembler-internal relocations BFD_RELOC_ARM_T32_OFFSET_U8,
BFD_RELOC_ARM_T32_OFFSET_IMM, BFD_RELOC_ARM_T32_IMMEDIATE.
Add visible relocations BFD_RELOC_THUMB_PCREL_BRANCH7,
BFD_RELOC_THUMB_BRANCH20, BFD_RELOC_THUMB_BRANCH25.
Delete unused relocations BFD_RELOC_ARM_GOT12, BFD_RELOC_ARM_COPY.
* bfd-in2.h, libbfd.h: Regenerate.
opcodes:
* arm-dis.c (thumb_opcodes): Add disassembly for V6T2 16-bit
instructions. Adjust disassembly of some opcodes to match
unified syntax.
(thumb32_opcodes): New table.
(print_insn_thumb): Rename print_insn_thumb16; don't handle
two-halfword branches here.
(print_insn_thumb32): New function.
(print_insn): Choose among print_insn_arm, print_insn_thumb16,
and print_insn_thumb32. Be consistent about order of
halfwords when printing 32-bit instructions.
gas:
* hash.c (hash_lookup): Add len parameter. All callers changed.
(hash_find_n): New interface.
* hash.h: Prototype hash_find_n.
* sb.c: Include as.h.
(scrub_from_sb, sb_to_scrub, scrub_position): New statics.
(sb_scrub_and_add_sb): New interface.
* sb.h: Prototype sb_scrub_and_add_sb.
* input-scrub.c (input_scrub_include_sb): Use sb_scrub_and_add_sb.
* config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Remove
reference to BFD_RELOC_ARM_GOT12 which is never generated.
* config/tc-arm.c: Rewrite, adding Thumb-2 support.
gas/testsuite:
* gas/arm/arm.exp: Convert all existing "gas_test" tests to
"run_dump_test" tests. Run more tests unconditionally. Run new tests.
* gas/arm/arch4t.s, gas/arm/arch6zk.s, gas/arm/arm3.s, gas/arm/arm6.s
* gas/arm/arm7dm.s, gas/arm/bignum1.s, gas/arm/float.s
* gas/arm/immed.s, gas/arm/iwmmxt.s, gas/arm/offset.s, gas/arm/thumb.s:
Adjust to work as a dump test.
* gas/arm/arch4t.d, gas/arm/arch6zk.d, gas/arm/arm3.d, gas/arm/arm6.d
* gas/arm/arm7dm.d, gas/arm/bignum1.d, gas/arm/float.d
* gas/arm/immed.d, gas/arm/iwmmxt.d, gas/arm/offset.d, gas/arm/thumb.d:
New files.
* gas/arm/armv1-bad.l, gas/arm/armv1-bad.s: Remove tests for
diagnostics that don't happen in the first pass anymore.
* gas/arm/iwmmxt-bad.l, gas/arm/r15-bad.l, gas/arm/req.l
* gas/arm/vfp-bad.l:
Update expected diagnostics.
* gas/arm/pic.d: Update expected reloc name.
* gas/arm/thumbv6.d: CPY no longer appears in disassembly.
* gas/arm/r15-bad.s: Avoid two-argument mul.
* gas/arm/req.s: Adjust comments.
* gas/arm/maverick.d, gas/arm/maverick.s: Avoid inappropriate
use of PC.
* gas/arm/macro-1.d, gas/arm/macro1.s
* gas/arm/t16-bad.l, gas/arm/t16-bad.s
* gas/arm/tcompat.d, gas/arm/tcompat.s
* gas/arm/tcompat2.d, gas/arm/tcompat2.s
* gas/arm/thumb32.d, gas/arm/thumb32.s
New test pair.
ld/testsuite:
* ld-arm/mixed-app.d: Adjust expected disassembly a little.
2005-05-17 Jan Beulich <jbeulich@novell.com>
* read.c (_find_end_of_line): New.
(find_end_of_line): New.
(HANDLE_CONDITIONAL_ASSEMBLY): Use it.
(read_a_source_file): Use it.
(s_globl): Use it.
(s_macro): Use it.
(get_line_sb): Use it.
(s_errwarn): Replace discard_rest_of_line by ignore_rest_of_line.
(s_comm_internal): Likewise.
(s_lsym): Likewise.
(s_macro): Likewise.
(s_ignore): Use ignore_rest_of_line.
* read.h (find_end_of_line): Prototype.
(discard_rest_of_line): Remove prototype. #define to
ignore_rest_of_line.
gas/testsuite/
2005-05-17 Jan Beulich <jbeulich@novell.com>
* gas/mmix/err-byte1.s: Adjust expected error text on line 10.
* config/tc-v850.c (md_assemble): When creating a fix record the operand in the
tc_fix_data field.
(md_apply_fix3): When applying a resolved fix use the operand's insertion
procedure to store the value, if the operand has been recorded.
* gas/v850/split-lo16.s: Add test for a lo() pseudo reloc corrupting an ld.w
instruction.
* gas/v850/split-lo16.d: Add expected, correct (ie not corrupt) output.
* frags.c (frag_grow): Don't be too greedy in allocating memory.
* config/tc-hppa.c (pa_block): Check arguments to .block[z].
gas/testsuite/
* gas/hppa/parse/block1.s: Use official limit (0x3fffffff) for
.block.
2005-05-09 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (optimize_disp): Discard displacement entirely when zero and
not required by encoding constraints.
gas/testsuite/
2005-05-09 Jan Beulich <jbeulich@novell.com>
* gas/i386/tlsd.[sd]: Adjust to not assume zero displacement will
actually be present in memory addressing.
* gas/i386/tlspic.[sd]: Likewise.
2005-05-06 Jan Beulich <jbeulich@novell.com>
* macro.c (new_formal, del_formal): New.
(do_formals): Use new_formal. Check for and parse qualifier. Warn if
required argument has default value. Stop looking for more formal
when there was a vararg one.
(macro_expand_body): Use new_formal and del_formal.
(macro_expand): Likewise. Initialize local variable err. Don't
return immediately when encountering an error. Warn when keyword
argument already had a value assigned. Eliminate duplicate clearing
of argument value. When current positional argument matches parameter
of vararg type, assign to it all the remaining arguments. Issue error
when required parameter does not have value.
(free_macro): Use del_formal.
(expand_irp): Initialize formal type. Free buffers associated with
formal prior to returning.
* macro.h (struct formal_struct): Add new field 'type' with new
enumeration type 'formal_type'.
* doc/as.texinfo: Document macro parameter qualifiers.
* NEWS: Mention new functionality.
gas/testsuite/
2005-05-06 Jan Beulich <jbeulich@novell.com>
* gas/macros/badarg.s: Add check for bad qualifier specification.
* gas/macros/badarg.l: Adjust.
* gas/macros/vararg.[sd]: New.
* gas/macros/macros.exp: Run new test.
2005-05-06 Jan Beulich <jbeulich@novell.com>
* gas/macros/dot.s: Don't use pseudo-ops in first column.
* gas/macros/dot.l: Match broader range of possible outputs.
* gas/macros/purge.l: Likewise.
* gas/macros/purge.s: Start generated macro names with an underscore.
bfd/
* config.bfd: Use bfd_elf32_i386_vxworks_vec for i?86-*-vxworks.
* configure.in: Add bfd_elf32_i386_vxworks_vec. i386 targets need
elf-vxworks.lo.
* configure: Regenerate.
* Makefile.am (BFD32_BACKENDS): Add elf-vxworks.lo.
(BFD32_BACKENDS_CFILES): Add elf-vxworks.c.
(elf32-i386.lo): Depend on elf-vxworks.h.
(elf-vxworks.lo): New rule.
* Makefile.in: Regenerate.
* elf-bfd.h (elf_backend_data): Update type of
elf_backend_emit_relocs.
(_bfd_elf_link_output_relocs): Update prototype.
* elflink.c (_bfd_elf_link_output_relocs): Always use
bed->elf_backend_emit_relocs when outputting relocations.
* elfxx-target.h (elf_backend_emit_relocs): Default to
_bfd_elf_link_output_relocs.
* targets.c (bfd_elf32_i386_vxworks_vec): Declare.
(_bfd_target_vector): Add bfd_elf32_i386_vxworks_vec.
* elf32-i386.c: Add elf32-i386-vxworks target BFD.
(elf_i386_plt0_entry): Remove padding.
(elf_i386_pic_plt0_entry): Ditto.
(PLTRESOLVE_RELOCS_SHLIB, PLTRESOLVE_RELOCS): Define.
(PLT_NON_JUMP_SLOT_RELOCS): Define.
(elf_i386_link_hash_table): Add srelplt2, hgot, hplt, is_vxworks and
plt0_pad_byte fields.
(elf_i386_link_hash_table_create): Zero them.
(elf_i386_create_dynamic_sections): Create static relocation section.
(allocate_dynrelocs): Allocate space for static PLT relocations.
(elf_i386_size_dynamic_sections): Save shortcuts to PLT and GOT
symbols. Give PLT symbols function type. Don't strip PLT sections
if we have exported symbols from them.
(elf_i386_finish_dynamic_symbol): Fill in VxWorks PLT static
relocation section. Don't mark _GLOBAL_OFFSET_TABLE_ as absolute on
VxWorks.
(elf_i386_finish_dynamic_sections): Allow different pad bytes.
Add relocation for GOT location. Fill in PLT static relocations.
(elf_i386_vxworks_link_hash_table_create): New function.
(elf_i386_vxworks_link_output_symbol_hook): New function.
* elf-vxworks.h: New file.
gas/
* config/tc-i386.h (ELF_TARGET_FORMAT): Define for TE_VXWORKS.
gas/testsuite/
* gas/i386/i386.exp: Don't run divide test on vxworks.
ld/
* Makefile.am: Add eelf_i386_vxworks.
* Makefile.in: Regenerate.
* configure.tgt: Make i?86-*-vxworks use targ_emul=elf_i386_vxworks.
* emulparams/elf_i386_vxworks.sh: New file.
* emulparams/vxworks.sh: New file.
* scripttempl/elf.sc: Add DATA_END_SYMBOLS and ETEXT_NAME.
gas/testsuite/
* lib/gas-defs.exp (regexp_diff): Pass test if last line is "#...".
ld/testsuite/
* lib/ld-lib.exp (regexp_diff): Pass test if last line is "#...".
* ld-elfweak/elfweak.exp: Run size2.d.
* ld-elfwaek/size2.d: New file.
* ld-elfwaek/size2a.s: New file.
* ld-elfwaek/size2b.s: New file.
2005-04-26 H.J. Lu <hongjiu.lu@intel.com>
* config/obj-multi.h (FAKE_LABEL_NAME): Defined.
* read.c (pseudo_set): Disallow symbol set to common symbol.
PR 857
* write.c (write_object_file): Report common symbol name when
disallowing local symbol set to common symbol.
(adjust_reloc_syms): Disallow local symbol set to undefined
symbol.
gas/testsuite/
2005-04-26 H.J. Lu <hongjiu.lu@intel.com>
* gas/all/assign.s: Make `x' and `y' global.
2005-04-25 Jan Beulich <jbeulich@novell.com>
* macro.c (macro_expand_body): Replace locals indicator parameters
with actual macro_entry. New local variables macro_line and err.
Don't return when encountering an error, just record the fact.
Detect local symbol name colliding with parameter. Track line number
inside of macro expansion.
(do_formals): Move local variable name to wider scope. Check
parameter of the same name doesn't already exist. In MRI mode, also
check it doesn't collide with the argument count pseudo-parameter).
(define_macro): Add file and line number parameters. Remove local
variable namestr. New local variable error. Initialize macro_entry
members file, line, and name. Don't return when encountering an
error, just record the fact. Use %s in some diagnostics for read.c
to insert the macro name. Free macro_entry on error.
(macro_expand): Pass macro_entry to macro_epand_body. Don't return
when encountering an error, just record the fact.
(expand_irp): Don't return when encountering an error, just record
the fact.
* macro.h (macro_struct): New members name, file, and line.
(define_macro): Add file and line number parameters.
* read.c (s_macro): Pass file and line to define_macro. Tag warning
regarding pseudo-op redefinition with the file/line that macro
definition started at.
gas/testsuite/
2005-04-25 Jan Beulich <jbeulich@novell.com>
* gas/macros/badarg.s: Add tests for collisions between/among macro
parameters and local symbols.
* gas/macros/badarg.l: Adjust.
2005-04-20 Jan Beulich <jbeulich@novell.com>
* gas/elf/struct.s: Adjust to not get into alignment issues.
* gas/elf/struct.d: Adjust for the above and the test's name.
2005-04-18 Jan Beulich <jbeulich@novell.com>
* macro.c (free_token): New, freeing all the memory associated with a
macro.
(do_formals): Move initializers to ...
(define_macro): ... here.
(delete_macro): Convert passed in name to lower case. Warn when
purging macro that doesn't exist. Use hash_jam instead of hash_delete.
gas/testsuite/
2005-04-18 Jan Beulich <jbeulich@novell.com>
* gas/macros/purge.[ls]: New.
* gas/macros/macros.exp: Run new test.
2005-04-15 Jan Beulich <jbeulich@novell.com>
* config/obj-elf.c (obj_elf_struct): New.
(elf_pseudo_table). Use it for .offset and .struct.
gas/testsuite/
2005-04-15 Jan Beulich <jbeulich@novell.com>
* gas/elf/struct.[sd]: New.
* gas/elf/elf.exp: Run new test.
* config/tc-mips.c (IS_ZEXT_32BIT_NUM): New macro.
(normalize_address_expr): New function to sign-extend address
offsets that fit into 32 bits in 32-bit mode.
(macro_build_ldst_constoffset): Use normalize_address_expr()
instead of a handcoded sequence.
(load_register): Likewise. Report oversized numbers in a useful
way.
(macro) [ld_st, ldd_std]: Reject all oversized offsets, not only
for constant addresses. Report oversized numbers in a useful way.
(mips_ip): Use normalize_address_expr() for addresses.
gas/testsuite/:
* gas/mips/ldstla-32.s: Exclude offsets that are now meant to fail
and include more instructions/offsets that are meant to succeed.
Use $4 instead $3 to avoid register dependencies.
* gas/mips/ldstla-32.d: Update accordingly.
* gas/mips/ldstla-32-shared.d: Likewise.
* gas/mips/ldstla-32-mips3.d: New test based on the above, except
for mips3.
* gas/mips/ldstla-32-mips3-shared.d: Similarly, for PIC.
* gas/mips/ldstla-32-mips3.s: Source for the new tests.
* gas/mips/ldstla-32-1.s: New test for offsets that are meant to
fail.
* gas/mips/ldstla-32-mips3-1.s: Likewise, for mips3.
* gas/mips/ldstla-32-1.l: Stderr output for the new test.
* gas/mips/ldstla-32-mips3-1.l: Likewise.
* gas/mips/mips.exp: Run the new tests.
2005-04-11 Jan Beulich <jbeulich@novell.com>
* NEWS: Mention these changes and their effects.
* macro.c (get_token): Use is_name_beginner/is_part_of_name/
is_name_ender.
(check_macro): Likewise.
(buffer_and_nest): Likewise. Permit multiple labels. Don't discard
labels together with the closing pseudo-op.
(macro_expand_body): Adjust comment. Range-check input before use.
Adjust mis-spelled diagnostic. Use is_name_beginner.
* read.c (try_macro): New.
(read_a_source_file): New static variable last_eol. Don't list
macro expansion lines more than once. Call try_macro.
(s_macro): Set section of line_label to absolute instead of undefined.
* doc/as.texinfo: Add information on the caveats of these changes.
gas/testsuite/
2005-04-11 Jan Beulich <jbeulich@novell.com>
* gas/macros/dot.[ls]: New.
* gas/macros/macros.exp: Run new test.
2005-04-01 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (md_apply_fix3): Also handle BFD_RELOC_X86_64_32S.
(tc_gen_reloc): Handle BFD_RELOC_X86_64_32S in the default case.
gas/testsuite/
2005-04-01 Jan Beulich <jbeulich@novell.com>
* gas/i386/x86-64-pcrel.[sd]: New.
* gas/i386/i386.exp: Run new test.
* bfd/bfd-in2.h: Regenerate.
* bfd/elf32-arm.c (elf32_arm_is_target_special_symbol): Rename call to
bfd_elf32_is_arm_mapping_symbol_name.
(elf32_arm_output_symbol_hook): Likewise.
(arm_elf_find_function): Likewise, and include STT_NOTYPE in test for
mapping symbols.
(is_arm_mapping_symbol_name): Function moved from here...
* bfd/cpu-arm.c (bfd_elf32_is_arm_mapping_symbol_name): ...to here,
renamed and made global.
* gas/config/tc-arm.c (mapping_state): Change documentation in function
comment to cross-reference spec instead. Change type of mapping symbols
to BSF_NO_TYPE.
(arm_adjust_symtab): Don't change type of mapping symbols here.
* gas/testsuite/gas/arm/mapping.d: Update expected output.
* ld/testsuite/ld-arm/arm-app-abs32.d: Likewise.
* ld/testsuite/ld-arm/arm-app.d: Likewise.
* ld/testsuite/ld-arm/mixed-app.d: Likewise.
2005-03-29 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run segment and inval-seg for i386. Run
x86-64-segment and x86-64-inval-seg for x86-64.
* gas/i386/intel.d: Expect movw for moving between memory and
segment register.
* gas/i386/naked.d: Likewise.
* gas/i386/opcode.d: Likewise.
* gas/i386/x86-64-opcode.d: Likewise.
* gas/i386/opcode.s: Use movw for moving between memory and
segment register.
* gas/i386/x86-64-opcode.s: Likewise.
* : Likewise.
* gas/i386/inval-seg.l: New.
* gas/i386/inval-seg.s: New.
* gas/i386/segment.l: New.
* gas/i386/segment.s: New.
* gas/i386/x86-64-inval-seg.l: New.
* gas/i386/x86-64-inval-seg.s: New.
* gas/i386/x86-64-segment.l: New.
* gas/i386/x86-64-segment.s: New.
include/opcode/
2005-03-29 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Don't allow the `l' suffix for moving
moving between memory and segment register. Allow movq for
moving between general-purpose register and segment register.
opcodes/
2005-03-29 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (SEG_Fixup): New.
(Sv): New.
(dis386): Use "Sv" for 0x8c and 0x8e.
indicates whether personality routine index N has been output for this
section.
(mapping_state): tc_segment_info_data now struct not enum.
(arm_elf_change_section): Likewise, and marked_pr_dependency is now
handled on section change.
(create_unwind_entry): Previous code to output dependency removed.
(s_arm_unwind_fnend): Output dependency if it hasn't been done already
for this section.
* gas/config/tc-arm.h (TC_SEGMENT_INFO_TYPE): Redefined as struct
arm_segment_info_type.
(arm_segment_info_type): New struct.
* gas/testsuite/gas/arm/unwind.d: Update expected output.
2005-03-17 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (i386_scale): Beautify error message.
(Intel syntax comments): Update.
(struct intel_parser_s): Add fields in_offset, in_bracket, and
next_operand.
(intel_e04_1, intel_e05_1, intel_e05_1, intel_e09_1, intel_e10_1):
Remove declarations.
(intel_bracket_expr): Declare.
(i386_intel_operand): Initialize new intel_parser fields. Wrap most
of the function body in a loop allowing to split an operand into two.
Replace calls to malloc and checks of it returning non-NULL with
calls to xmalloc/xstrdup.
(intel_expr): SHORT no longer handled here. Add comment indicating
comparison ops need implementation.
(intel_e04, intel_e04_1): Combine, replace recursion with loop.
Check right operand of - does not specify a register when parsing
the address of a memory reference.
(intel_e05, intel_e05_1): Combine, replace recursion with loop.
Check operands do not specify a register when parsing the address of
a memory reference.
(intel_e06, intel_e06_1): Likewise.
(intel_e09, intel_e09_1): Combine, replace recursion with loop. Also
handle SHORT as well as unary + and -. Don't accept : except for
segment overrides or in direct far jump/call insns.
(intel_brack_expr): New.
(intel_e10, intel_e10_1): Combine, replace recursion with loop. Use
intel_brack_expr.
(intel_e11): Replace chain of if/else-if by switch, alloing fall-
through in certain cases. Use intel_brack_expr. Add new diagnostics.
Allow symbolic constants as register scale value.
(intel_get_token): Replace call to malloc and check of return value
with call to xmalloc. Change handling for FLAT to match MASM's.
(intel_putback_token): Don't try to back up/free current token if
that is T_NIL.
gas/testsuite/
2005-03-17 Jan Beulich <jbeulich@novell.com>
* gas/i386/intel.d: Add stderr directive.
* gas/i386/intel.e: New.
* gas/i386/intel16.d: Add stderr directive. Adjust for changed
source.
* gas/i386/intel16.e: New.
* gas/i386/intel16.s: Add instances of addressing forms with base
and index specified in reverse order.
* gas/i386/intelbad.l: Adjust for changed source.
* gas/i386/intelbad.s: Add more operand forms to check.
* gas/i386/intelok.d: Remove -r from objdump options. Add stderr
directive. Adjust for changed source.
* gas/i386/intelok.e: New.
* gas/i386/intelok.s: Define MASM constants byte, word, etc. Add
more operand forms to check.
* gas/i386/x86_64.d: Add stderr directive.
* gas/i386/x86_64.e: New.
* gas/i386/x86_64.s: Adjust for parser changes.
* ppc-opc.c (insert_sprg, extract_sprg): New Functions.
(powerpc_operands <SPRG>): Call the above. Bit field is 5 bits.
(SPRG_MASK): Delete.
(XSPRG_MASK): Mask off extra bits now part of sprg field.
(powerpc_opcodes): Asjust mfsprg and mtsprg to suit new mask. Move
mfsprg4..7 after msprg and consolidate.
gas/testsuite
* gas/ppc/booke.s: Add new m[t,f]sprg testcases.
* gas/ppc/booke.d: Likewise.
(MAX_NOPS): Bump to 4.
(mips_fix_vr4130): New variable.
(nops_for_vr4130): New function.
(nops_for_insn): Use MAX_DELAY_NOPS rather than MAX_NOPS. Use
nops_for_vr4130 if working around VR4130 errata.
(OPTION_FIX_VR4130, OPTION_NO_FIX_VR4130): New macros.
(md_longopts): Add -mfix-vr4130 and -mno-fix-vr4130.
(md_parse_option): Handle them.
(md_show_usage): Print them.
* doc/c-mips.texi: Document -mfix-vr4130 and -mno-fix-vr4130.
(MAX_NOPS): Bump to 4.
(mips_fix_vr4130): New variable.
(nops_for_vr4130): New function.
(nops_for_insn): Use MAX_DELAY_NOPS rather than MAX_NOPS. Use
nops_for_vr4130 if working around VR4130 errata.
(OPTION_FIX_VR4130, OPTION_NO_FIX_VR4130): New macros.
(md_longopts): Add -mfix-vr4130 and -mno-fix-vr4130.
(md_parse_option): Handle them.
(md_show_usage): Print them.
* doc/c-mips.texi: Document -mfix-vr4130 and -mno-fix-vr4130.
2005-03-08 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (emit_one_bundle): Track last slot user insn was
emitted to. Add more precise diagnostics for non-fitting insns based
on that. Eliminate now superfluous special casing of MLX. Clear out
slot information when dropping an insn.
gas/testsuite/
2005-03-08 Jan Beulich <jbeulich@novell.com>
* gas/ia64/no-fit.[ls]: New.
* gas/ia64/ia64.exp: Run new test.
2005-03-08 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (parse_section_name): Rename to...
(cross_section): In addition to separating the name from the rest of
the arguments, also carry out the operation.
(dot_xdata): Use cross_section.
(dot_float_cons): Likewise.
(dot_xstringer): Likewise.
(dot_xdata_ua): Likewise.
(dot_float_cons_ua): Likewise. Pass float_cons, not stmt_float_cons.
gas/testsuite/
2005-03-08 Jan Beulich <jbeulich@novell.com>
* gas/ia64/xdata.[sd], gas/ia64/xdata-ilp32.d: New.
* gas/ia64/ia64.exp: Run new tests.
* elfxx-mips.c (mips_elf_calculate_relocation): Handle special
'__gnu_local_gp' symbol used by gas -mno-shared.
gas/ChangeLog
* config/tc-mips.c (macro_build_lui): Use '__gnu_local_gp'
instead of '_gp' for -mno-shared optimization.
(s_cpload): Ditto.
(s_abicalls): Document it in the comment.
(md_show_usage): Document the -mno-shared option.
gas/testsuite/ChangeLog
* gas/mips/elf-rel23b.d: Use '__gnu_local_gp' instead of '_gp'
for -mno-shared optimization.
* gas/mips/elf-rel25a.d: Ditto.
ld/testsuite/ChangeLog
* ld-mips-elf/multi-got-no-shared-1.s,
ld-mips-elf/multi-got-no-shared-2.s,
ld-mips-elf/multi-got-no-shared.d: New tests.
* ld-mips-elf/mips-elf.exp: Run them.
(mips_opts): Initialize it.
(HAVE_32BIT_ADDRESSES): Set to true if pointers are 32 bits wide.
(HAVE_64BIT_ADDRESSES): Redefine as !HAVE_32BIT_ADDRESSES.
(HAVE_32BIT_SYMBOLS, HAVE_64BIT_SYMBOLS): New macros.
(load_address): Use HAVE_64BIT_SYMBOLS instead of HAVE_64BIT_ADDRESSES
when deciding whether to use a symbolic %highest/%higher expansion.
(macro): Likewise. Remove o64/n32 linux hack. Always use
ADDRESS_ADD*_INSN for address addition in the expansion of "dla"
and "la". Handle constants separately from symbolic expressions in
the "ld_st:" case, using 64-bit arithmetic if HAVE_64BIT_ADDRESSES
and using load_register to load the high part of the address.
(OPTION_MSYM32, OPTION_NO_MSYM32): New macros.
(OPTION_ELF_BASE): Bump by 2.
(md_longopts): Add entries for -msym32 and -mno-sym32.
(md_parse_option): Handle them.
(usage): Document them.
(s_mipsset): Handle ".set sym32" and ".set nosym32".
(s_cpload, s_cpsetup): Use HAVE_64BIT_SYMBOLS instead of
HAVE_64BIT_ADDRESSES to detect 64-bit values of "_gp".
* doc/c-mips.texi: Document ".set sym32", ".set nosym32",
-msym32 and -mno-sym32.
* gas/sh/pcrel-hms.d: New file. Adjusted form of pcrel-coff.d for the sh-hms
target.
* gas/sh/arch/arch.exp: Expect the same failures for sh-hms port as for the
sh-coff port.
2005-03-02 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (intel_e11): If not followed by T_PTR, treat T_BYTE
etc. like normal symbol references (T_ID).
gas/testsuite/
2005-03-02 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.d: Add -r to objdump options. Adjust expectations.
* gas/i386/intelok.s: Add checks for various special memory operands.
(struct objdump_disasm_info): Add 'reloc' field.
(disassemble_bytes): Fix check for when an insn has a reloc associated with it.
Improve comment explaining why the use of octets is wrong. Set the 'reloc'
field in objdump_disasm_info structure.
(objdump_print_addr): Use new 'reloc' field to lookup the correct address for
the symbol associated with the current instruction's relocation.
(disassemble_info): Initialise 'reloc' field.
gas/arm/inst.d: Allow for ARM ports which decode the reloc associated with
branches and so show the exact symbolic destination address rather than an
offset from the start of the section.
gas/arm/pic.d: Likewise.
information.
* gas/mips/mips16-dwarf2-n32.d: New test to check DWARF2 line
information for MIPS16 for the n32 ABI.
* gas/mips/mips.exp. Run the new test.
* config/tc-mips.c (append_insn): Call dwarf2_emit_insn() before
emitting insn.
gas/testsuite/:
* gas/mips/mips16-dwarf2.d: New test to check DWARF2 line
information for MIPS16.
* gas/mips/mips16-dwarf2.s: Source for the new test.
* gas/mips/mips.exp: Run the new test.
2005-02-17 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (ia64_parse_name): Don't advance 'name' when
parsing inN, locN, outN. Set 'idx' to offset register number starts
at. Don't handle numbers with leading zeroes or beyond 95. Remove
pointless cast.
gas/testsuite/
2005-02-17 Jan Beulich <jbeulich@novell.com>
* gas/ia64/nostkreg.[ds]: New.
* gas/ia64/ia64.exp: Run new test.
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* elf32-mips.c (elf_mips16_howto_table_rel): New array for MIPS16
reloc howtos. Add R_MIPS16_HI16 and R_MIPS16_LO16 relocs and
R_MIPS16_GOT16 and R_MIPS16_CALL16 placeholders.
(elf_mips16_jump_howto): Move into elf_mips16_howto_table_rel.
(elf_mips16_gprel_howto): Likewise. Redefine src_mask and
dst_mask.
(mips16_gprel_reloc): Remove bit shuffling; call
_bfd_mips16_elf_reloc_unshuffle(), _bfd_mips_elf_gprel16_with_gp()
and _bfd_mips16_elf_reloc_shuffle() instead.
(mips16_reloc_map): New reloc map for MIPS16 relocs.
(bfd_elf32_bfd_reloc_type_lookup): Use mips16_reloc_map for MIPS16
relocs.
(mips_elf32_rtype_to_howto): Fetch MIPS16 howtos from
elf_mips16_howto_table_rel.
* elf64-mips.c (mips16_elf64_howto_table_rel): New array for
MIPS16 REL reloc howtos. Add R_MIPS16_HI16 and R_MIPS16_LO16
relocs and R_MIPS16_GOT16 and R_MIPS16_CALL16 placeholders.
(elf_mips16_jump_howto): Move into mips16_elf64_howto_table_rel.
(elf_mips16_gprel_howto): Likewise. Redefine src_mask and
dst_mask.
(mips16_elf64_howto_table_rela): New array for MIPS16 RELA
reloc howtos. Add R_MIPS16_26, R_MIPS16_GPREL, R_MIPS16_HI16 and
R_MIPS16_LO16 relocs and R_MIPS16_GOT16 and R_MIPS16_CALL16
placeholders.
(mips16_gprel_reloc): Remove bit shuffling; call
_bfd_mips16_elf_reloc_unshuffle(), _bfd_mips_elf_gprel16_with_gp()
and _bfd_mips16_elf_reloc_shuffle() instead.
(mips16_reloc_map): New reloc map for MIPS16 relocs.
(bfd_elf64_bfd_reloc_type_lookup): Use mips16_reloc_map for MIPS16
relocs.
(mips_elf64_rtype_to_howto): Fetch MIPS16 howtos from
mips16_elf64_howto_table_rela or mips16_elf64_howto_table_rel.
* elfn32-mips.c (elf_mips16_howto_table_rel): New array for MIPS16
REL reloc howtos. Add R_MIPS16_HI16 and R_MIPS16_LO16 relocs and
R_MIPS16_GOT16 and R_MIPS16_CALL16 placeholders.
(elf_mips16_jump_howto): Move into elf_mips16_howto_table_rel.
(elf_mips16_gprel_howto): Likewise. Redefine src_mask and
dst_mask.
(mips16_gprel_reloc): Remove bit shuffling; call
_bfd_mips16_elf_reloc_unshuffle(), _bfd_mips_elf_gprel16_with_gp()
and _bfd_mips16_elf_reloc_shuffle() instead.
(mips16_reloc_map): New reloc map for MIPS16 relocs.
(bfd_elf32_bfd_reloc_type_lookup): Use mips16_reloc_map for MIPS16
relocs.
(mips_elf_n32_rtype_to_howto): Fetch MIPS16 howtos from
elf_mips16_howto_table_rela or elf_mips16_howto_table_rel.
* elfxx-mips.c (_bfd_mips16_elf_reloc_unshuffle): New function to
handle bit shuffling for MIPS16 relocs.
(_bfd_mips16_elf_reloc_shuffle): Likewise.
(_bfd_mips_elf_lo16_reloc): Use _bfd_mips16_elf_reloc_unshuffle()
and _bfd_mips16_elf_reloc_shuffle().
(_bfd_mips_elf_generic_reloc): Likewise.
(mips_elf_calculate_relocation): Likewise. Handle R_MIPS16_HI16
and R_MIPS16_LO16.
(mips_elf_obtain_contents): Remove bit shuffling.
(mips_elf_perform_relocation): Likewise; call
_bfd_mips16_elf_reloc_unshuffle() and _bfd_mips16_elf_reloc_shuffle()
instead.
(_bfd_mips_elf_relocate_section): Likewise. Handle R_MIPS16_HI16
and R_MIPS16_LO16.
* elfxx-mips.h (_bfd_mips16_elf_reloc_unshuffle): Declare.
(_bfd_mips16_elf_reloc_shuffle): Likewise.
* reloc.c (BFD_RELOC_MIPS16_HI16): New reloc.
(BFD_RELOC_MIPS16_HI16_S): Likewise.
(BFD_RELOC_MIPS16_LO16): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/:
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* config/tc-mips.c (reloc_needs_lo_p): Handle
BFD_RELOC_MIPS16_HI16_S.
(fixup_has_matching_lo_p): Handle BFD_RELOC_MIPS16_LO16.
(append_insn): Add BFD_RELOC_MIPS16_GPREL, BFD_RELOC_MIPS16_HI16_S
and BFD_RELOC_MIPS16_LO16 to relocs to suppress overflow
complaints on.
(mips16_ip): Resolve BFD_RELOC_MIPS16_HI16_S,
BFD_RELOC_MIPS16_HI16 and BFD_RELOC_MIPS16_LO16 for constants.
Call my_getSmallExpression() to parse percent operators.
(percent_op_match, mips_percent_op): Separate definitions.
(mips16_percent_op): Define percent operators for the MIPS16 mode.
(parse_relocation): Handle the MIPS16 mode using
mips16_percent_op.
(md_apply_fix3): Handle BFD_RELOC_MIPS16_HI16,
BFD_RELOC_MIPS16_HI16_S and BFD_RELOC_MIPS16_LO16.
gas/testsuite/:
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* gas/mips/mips16-hilo.d: New test for the R_MIPS16_HI16 and
R_MIPS16_LO16 relocs.
* gas/mips/mips16-hilo-n32.d: Likewise, for the n32 ABI.
* gas/mips/mips16-hilo.s: Source for the new tests.
* gas/mips/mips.exp: Run the new tests.
include/:
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* elf/mips.h (R_MIPS16_GOT16): New reloc code.
(R_MIPS16_CALL16): Likewise.
(R_MIPS16_HI16): Likewise.
(R_MIPS16_LO16): Likewise.
(R_MIPS16_min): New fake reloc code.
(R_MIPS16_max): Likewise.
ld/testsuite/:
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* ld-mips-elf/mips16-hilo.d: New test for the R_MIPS16_HI16 and
R_MIPS16_LO16 relocs.
* ld-mips-elf/mips16-hilo-n32.d: Likewise, for the n32 ABI.
* ld-mips-elf/mips16-hilo.s: Auxiliary source for the new tests.
* ld-mips-elf/mips-elf.exp: Run the new tests.
2005-02-15 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (md_apply_fix3): Call ia64_gen_real_reloc_type
instead of explicitly dealing with the translation; exclude
relocations that are already pcrel, however.
gas/testsuite/
2005-02-15 Jan Beulich <jbeulich@novell.com>
* gas/ia64/pcrel.[ds]: New.
* gas/ia64/ia64.exp: Run new test.
2005-02-15 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c: Include limits.h (if available).
(gr_values[0]): Set path to INT_MAX.
(dot_reg_val): Don't allow changing value of r0. Limit range of
general registers at r127.
(specify_resource): Default resource index is -1. Don't set resource
index (in case IA64_RS_RSE) without setting the specific flag.
(note_register_values): Check operand is O_constant before tracking
input value of moves. Add tracking for dep.z with constant inputs.
(print_dependency): Resource index of specific resource may be zero.
(check_dependencies): Likewise.
gas/testsuite/
2005-02-15 Jan Beulich <jbeulich@novell.com>
* gas/ia64/dv-raw-err.l: Expect specific resource for RAW violation on b0.
* gas/ia64/regval.[ls]: New.
* gas/ia64/ia64.exp: Run new test.
2005-02-15 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (parse_operands): New local variables reg1, reg2,
reg_class. Check operands and emit diagnostics for illegal use of
registers.
gas/testsuite/
2005-02-15 Jan Beulich <jbeulich@novell.com>
* gas/ia64/dv-raw-err.s: Don't use r0 or f0 as output operand.
* gas/ia64/dv-waw-err.s: Likewise.
* gas/ia64/reg-err.[ls]: New.
* gas/ia64/ia64.exp: Run new test.
2005-02-15 Jan Beulich <jbeulich@novell.com>
* elfxx-ia64.c (ia64_howto_table): Correct strings for
R_IA64_DTPMOD64[LM]SB.
gas/
2005-02-15 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (ia64_gen_real_reloc_type): Define and initialize
new variables type, suffix, and width. Handle
BFD_RELOC_IA64_DIR(32|64)[LM]SB in FUNC_LT_FPTR_RELATIVE case.
Handle BFD_RELOC_IA64_DIR64[LM]SB in FUNC_TP_RELATIVE case. Add
FUNC_DTP_MODULE case. Handle BFD_RELOC_IA64_DIR32[LM]SB in
FUNC_DTP_RELATIVE case. Return incoming relocation type if
BFD_RELOC_IA64_IPLT[LM]SB in FUNC_IPLT_RELOC case. Generate warning
if unable to translate relocation type, using the new variables.
gas/testsuite/
2005-02-15 Jan Beulich <jbeulich@novell.com>
* gas/ia64/reloc.[ds]: New.
* gas/ia64/reloc-bad.[ls]: New.
* gas/ia64/ia64.exp: Run new tests.
2005-02-15 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (ia64_parse_name): Only update next character if
input_line_pointer was advanced.
gas/testsuite/
2005-02-15 Jan Beulich <jbeulich@novell.com>
* gas/ia64/operand-or.d: Pass -xnone to assembler.
2005-02-13 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (dot_rot): Add comment that name strings should
be freed when wiping out previous state. Canonicalize names before
use. Free name string when detecting redefinition.
(dot_pred_rel): Call generic expression parser to process arguments.
Handle O_register case for individual predicates and O_subtract for
ranges.
(ia64_parse_name): Canonicalize name before looking it up in dynamic
register hash.
(ia64_canonicalize_symbol_name): Strip off all trailing # characters.
Warn if multiple found, issue error if resulting symbol name has zero
length.
(dot_alias): Canonicalize name before use.
gas/testsuite/
2005-02-13 Jan Beulich <jbeulich@novell.com>
* gas/ia64/pound.[ls]: New.
* gas/ia64/ia64.exp: Run new test.
2005-02-11 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Mention "-munwind-check=[warning|error]".
* config/tc-ia64.c (md): Add unwind_check.
(unwind_diagnostic): New.
(in_procedure): Call unwind_diagnostic when a directive isn't
in procedure.
(in_prologue): Call unwind_diagnostic when a directive isn't in
prologue.
(in_body): Call unwind_diagnostic when a directive isn't in
body region.
(dot_endp): Set md.unwind_check to error before calling
in_procedure and restore it after. When the name is missing or
couldn't be found, use the one from the last .proc if
md.unwind_check isn't error. Warn if md.unwind_check is
warning.
(md_parse_option): Handle "-munwind-check=[warning|error]".
(md_show_usage): Add "-munwind-check=[warning|error]".
(ia64_init): Set md.unwind_check to warning.
* doc/as.texinfo: Add "-munwind-check=[none|warning|error]".
* doc/c-ia64.texi: Likewise.
gas/testcase
2005-02-11 H.J. Lu <hongjiu.lu@intel.com>
* gas/ia64/ia64.exp: Pass -munwind-check=error for unwind-err
and proc.
BFD_RELOC_UNUSED.
(do_t_push_pop): Likewise.
(md_assemble): Likewise.
(md_apply_fix3): Handle BFD_RELOC_NONE correctly, make BFD_RELOC_UNUSED
same as previous meaning of BFD_RELOC_NONE.
(create_unwind_entry): Output dependency on the required personality
routines.
testsuite/gas/arm/unwind.d: Alter expected output to include dependency
on __aeabi_unwind_cpp_pr[01].
2005-02-09 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.s: Remove comments disabling alternative forms of
fbld, fbstp, and fldcw.
* gas/i386/intelok.d: Expect two instances of fbld, fbstp, and fldcw.
include/opcode/
2005-02-09 Jan Beulich <jbeulich@novell.com>
PR gas/707
* i386.h (i386_optab): Add x_Suf to fbld and fbstp. Add w_Suf and
FloatMF to fldcw, fstcw, fnstcw, and the memory formas of fstsw and
fnstsw.
2005-02-02 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (dot_pred_rel): Update comment. Handle @-prefixed
designators along with quoted ones. Free copy of quoted designator
when done.
gas/testsuite/
2005-02-02 Jan Beulich <jbeulich@novell.com>
* gas/ia64/pred-rel.s: New.
* gas/ia64/ia64.exp: Run new test.
2005-01-31 Jan Beulich <jbeulich@novell.com>
* macro.c (buffer_and_nest): Allow 'from' being NULL; handle anything
that can end with .endr in that case. Make requiring/permitting
pseudo-ops without leading dot closer to the logic in read.c serving
the same purpose.
(expand_irp): Don't pass a mnemonic to buffer_and_nest as it will be
ignored.
gas/testsuite/
2005-01-31 Jan Beulich <jbeulich@novell.com>
* gas/macros/repeat.[ds]: New.
* gas/macros/macros.exp: Run new test.
2005-01-31 Jan Beulich <jbeulich@novell.com>
* macro.c (do_formals): Adjust to no longer accept empty parameter
names.
(define_macro): Adjust to no longer accept empty macro name, garbage
following the parameters, or macros that were previously defined.
* read.c (s_bad_end): Declare.
(potable): Add endm. Handler for endr and endm is s_bad_end.
(s_bad_end): Rename from s_bad_endr. Adjust to handle both .endm
and .endr.
* read.h (s_bad_endr): Remove.
gas/testsuite/
2005-01-31 Jan Beulich <jbeulich@novell.com>
* gas/macros/badarg.[ls]: New.
* gas/macros/end.[ls]: New.
* gas/macros/redef.[ls]: New.
* gas/macros/macros.exp (run_list_test): Copy from elsewhere.
Run new tests.
2005-01-31 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (parse_operands): Parse all specified operands,
immediately discarding (but counting) those exceeding the maximum
possible amount. Track whether output and input operand counts ever
matched, and use this to better indicate which of the operands/
operand types was wrong; specifically don't default to pointing to
the first operand.
gas/testsuite/
2005-01-31 Jan Beulich <jbeulich@novell.com>
* gas/ia64/operands.[ls]: New.
* gas/ia64/ia64.exp: Run new test.
2005-01-31 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (unwind): Remove proc_end (now an automatic
variable in dot_endp). Add body and insn. Make prologue,
prologue_mask, body, and insn bitfields.
(fixup_unw_records): Remove spurious new-lines from end of diagnostic
messages.
(in_procedure, in_prologue, in_body): New.
(dot_fframe, dot_vframe, dot_vframesp, dot_vframepsp, dot_save,
dot_restore, dot_restorereg, dot_restorereg_p, dot_handlerdata,
dot_unwentry, dot_altrp, dot_savemem, dot_saveg, dot_savef, dot_saveb,
dot_savegf, dot_spill, dot_spillreg, dot_spillmem, dot_spillreg_p,
dot_spillmem_p, dot_label_state, dot_copy_state, dot_unwabi,
dot_personality): Use the appropriate one of the above.
(dot_proc): Clear unwind.proc_start; set to current location only if
none of the entry points were valid. Check for non-zero-length entry
point names. Check that entry points aren't defined, yet. Clear
unwind.prologue, unwind.body, and unwind.insn.
(dot_body): Call in_procedure. Check that first directive in procedure
had no insns emitted before. Set unwind.body.
(dot_prologue): Call in_procedure. Check that not already in prologue.
Check that first directive in procedure had no insns emitted before.
Clear unwind.body.
(dot_endp): Call in_procedure. Declare proc_end. Check for non-zero-
length entry point names. Check that entry points became defined.
(md_assemble): Set unwind.insn once unwind.proc_start is defined.
gas/testsuite/
2005-01-31 Jan Beulich <jbeulich@novell.com>
* gas/ia64/proc.[ls]: New.
* gas/ia64/unwind-err.[ls]: New.
* gas/ia64/ia64.exp: Run new tests.
2005-01-31 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (emit_one_bundle): Snapshot manual bundling state
before actually using it. Don't generate an error in manual bundling
mode when looking at an insn requiring slot 2 but not yet at slot 2.
Don't generate an error in manual bundling mode when looking at an
insn required to be last in its group but the required slot hasn't
been reached, yet. Allow conversion from MII to MI;I for bundle
consisting of only 2 insns with the stop between them. Suppress
various meaningless errors resulting from detecting earlier ones.
gas/testsuite/
2005-01-31 Jan Beulich <jbeulich@novell.com>
* gas/ia64/bundling.[ds]: New.
* gas/ia64/label.[ls]: New.
* gas/ia64/last.[ls]: New.
* gas/ia64/slot2.[ls]: New.
* gas/ia64/ia64.exp: Run new tests.
2005-01-31 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (parse_operands): Also handle alloc without first
input being ar.pfs.
gas/testsuite/
2005-01-31 Jan Beulich <jbeulich@novell.com>
* gas/ia64/pseudo.[ds]: New.
* gas/ia64/ia64.exp: Run new test.
opcodes/
2005-01-31 Jan Beulich <jbeulich@novell.com>
* ia64-gen.c (NELEMS): Define.
(shrink): Generate alias with missing second predicate register when
opcode has two outputs and these are both predicates.
* ia64-opc-i.c (FULL17): Define.
(ia64_opcodes_i): Add mov-to-pr alias without second input. Use FULL17
here to generate output template.
(TBITCM, TNATCM): Undefine after use.
* ia64-opc-m.c (ia64_opcodes_i): Add alloc alias without ar.pfs as
first input. Add ld16 aliases without ar.csd as second output. Add
st16 aliases without ar.csd as second input. Add cmpxchg aliases
without ar.ccv as third input. Add cmp8xchg16 aliases without ar.csd/
ar.ccv as third/fourth inputs. Consolidate through...
(CMPXCHG_acq, CMPXCHG_rel, CMPXCHG_1, CMPXCHG_2, CMPXCHG_4, CMPXCHG_8,
CMPXCHGn, CMP8XCHG16, CMPXCHG_ALL): Define.
* ia64-asmtab.c: Regenerate.
2005-01-27 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (emit_one_bundle): Change "?imbf??" to "?ibmfxx".
gas/testsuite/
2005-01-27 Jan Beulich <jbeulich@novell.com>
* gas/ia64/nop_x.[ds]: New.
* gas/ia64/ia64.exp: Run new test.
2005-01-25 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (emit_one_bundle): Add late resolution of move
to/from application registers dynamic insns.
(md_assemble): Defer resolution of move to/from application registers
dynamic insns when they can be issued on either the I- or M-units.
gas/testsuite/
2005-01-25 Jan Beulich <jbeulich@novell.com>
* gas/ia64/dv-waw-err.l: Don't expect ar112 move warning to refer to
M-unit.
* gas/ia64/mov-ar.[ds]: New.
* gas/ia64/ia64.exp: Run new test.
(emit_expr): ...here. Handle the case where X_add_number is
positive and the input value is negative.
(output_big_sleb128): Fix setting of continuation bit. Check whether
the final byte needs to be sign-extended. Fix size-shrinking loop.
(emit_leb128_expr): When generating a signed leb128, see whether the
sign of an O_constant's X_add_number matches the sign of the input
value. Use a bignum if not.
2005-01-12 H.J. Lu <hongjiu.lu@intel.com>
* i386/i386.exp: Run "sib".
* gas/i386/sib.d: New file.
* gas/i386/sib.s: Likewise.
opcodes/
2005-01-12 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (OP_E): Ignore scale when index == 0x4 in SIB.
* v850.h (R_V850_LO16_SPLIT_OFFSET): New reloc.
bfd/
* reloc.c (BFD_RELOC_V850_LO16_SPLIT_OFFSET): New bfd_reloc_code_type.
* elf32-v850.c (v850_elf_howto_table): Add entry for
R_V850_LO16_SPLIT_OFFSET.
(v850_elf_reloc_map): Map it to BFD_RELOC_V850_LO16_SPLIT_OFFSET.
(v850_elf_perform_lo16_relocation): New function, extracted from...
(v850_elf_perform_relocation): ...here. Use it to handle
R_V850_LO16_SPLIT_OFFSET.
(v850_elf_check_relocs, v850_elf_final_link_relocate): Handle
R_V850_LO16_SPLIT_OFFSET.
* libbfd.h, bfd-in2.h: Regenerate.
gas/
* config/tc-v850.c (handle_lo16): New function.
(v850_reloc_prefix): Use it to check lo().
(md_assemble, md_apply_fix3): Handle BFD_RELOC_V850_LO16_SPLIT_OFFSET.
gas/testsuite/
* gas/v850/split-lo16.{s,d}: New test.
* gas/v850/v850.exp: Run it.
ld/testsuite/
* ld-v850: New directory.
2004-12-15 Jan Beulich <jbeulich@novell.com>
* config/obj-elf.c (obj_elf_change_section): Only set type and
attributes on new sections. Emit warning when type of re-declared
section doesn't match.
gas/testsuite/
2004-12-15 Jan Beulich <jbeulich@novell.com>
* gas/elf/section5.[els]: New.
* elfcode.h (elf_slurp_symbol_table): Use bfd_elf_sym_name so that
canonical sections syms have a name.
gas/testsuite/
Update for changed section syms.
ld/testsuite/
Update for changed section syms.
* gas/mips/elf-rel23b.d: New test.
* gas/mips/elf-rel25.s: New test.
* gas/mips/elf-rel25.d: New test.
* gas/mips/elf-rel25a.d: New test.
* gas/mips/mips.exp: Run new tests.
2004-11-25 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (optimize_imm): Adjust immediates to only those
permissible for the selected instruction suffix.
(process_suffix): For DefaultSize instructions, suppressing the
guessing of a 'q' suffix if the instruction doesn't support it is
pointless, because only an 'l' suffix can be guessed in this place.
gas/testsuite/
2004-11-25 Jan Beulich <jbeulich@novell.com>
* gas/i386/x86-64-inval.[sl]: Remove sahf/lahf.
include/opcode/
2004-11-25 Jan Beulich <jbeulich@novell.com>
* i386.h: CpuNo64 mov can't reasonably have a 'q' suffix. Moves
to/from test registers are illegal in 64-bit mode. Add missing
NoRex64 to sidt. fxsave/fxrstor now allow for a 'q' suffix
(previously one had to explicitly encode a rex64 prefix). Re-enable
lahf/sahf in 64-bit mode as at least some Athlon64/Opteron steppings
support it there. Add cmpxchg16b as per Intel's 64-bit documentation.
They should be correct now.
* gas/mn10300/relax.s: Add further tests of the relaxing of branch instructions.
* gas/mn10300/relax.d: Add expected relocations.
* elf32-arm.c (PLT_THUMB_STUB_SIZE): Define.
(elf32_arm_plt_thumb_stub): New.
(struct elf32_arm_link_hash_entry): Add plt_thumb_refcount
and plt_got_offset.
(elf32_arm_link_hash_traverse): Fix typo.
(elf32_arm_link_hash_table): Add obfd.
(elf32_arm_link_hash_newfunc): Initialize new fields.
(elf32_arm_copy_indirect_symbol): Copy plt_thumb_refcount.
(elf32_arm_link_hash_table_create): Initialize obfd.
(record_arm_to_thumb_glue): Mark the glue as a local ARM function.
(record_thumb_to_arm_glue): Mark the glue as a local Thumb function.
(bfd_elf32_arm_get_bfd_for_interworking): Verify that the
interworking BFD is not dynamic.
(bfd_elf32_arm_process_before_allocation): Handle R_ARM_PLT32. Do
not emit glue for PLT references.
(elf32_arm_final_link_relocate): Handle Thumb functions. Do not
emit glue for PLT references. Support the Thumb PLT prefix.
(elf32_arm_gc_sweep_hook): Handle R_ARM_THM_PC22 and
plt_thumb_refcount.
(elf32_arm_check_relocs): Likewise.
(elf32_arm_adjust_dynamic_symbol): Handle Thumb functions and
plt_thumb_refcount.
(allocate_dynrelocs): Handle Thumb PLT references.
(elf32_arm_finish_dynamic_symbol): Likewise.
(elf32_arm_symbol_processing): New function.
(elf_backend_symbol_processing): Define.
opcodes/
* arm-dis.c (WORD_ADDRESS): Define.
(print_insn): Use it. Correct big-endian end-of-section handling.
gas/testsuite/
* gas/arm/mapping.d: Expect F markers for Thumb code.
* gas/arm/unwind.d: Update big-endian pattern.
ld/
* emultempl/armelf.em (arm_elf_set_bfd_for_interworking): Don't use
a dynamic object for stubs.
ld/testsuite/
* ld-arm/mixed-app.d, ld-arm/mixed-app.r, ld-arm/mixed-app.s,
ld-arm/mixed-app.sym, ld-arm/mixed-lib.d, ld-arm/mixed-lib.r,
ld-arm/mixed-lib.s, ld-arm/mixed-lib.sym, ld-arm/arm-dyn.ld,
ld-arm/arm-lib.ld: New files.
* ld-arm/arm-app-abs32.d, ld-arm/arm-app-abs32.r, ld-arm/arm-app.d,
ld-arm/arm-app.r, ld-arm/arm-lib-plt32.d, ld-arm/arm-lib-plt32.r,
ld-arm/arm-lib.d, ld-arm/arm-lib.r, ld-arm/arm-static-app.d,
ld-arm/arm-static-app.r: Update for big-endian.
* ld-arm/arm-elf.exp: Run the new tests.
* config/tc-xtensa.c (MAX_IMMED6): Change value to 65.
gas/testsuite/
* gas/xtensa/short_branch_offset.s: New.
* gas/xtensa/short_branch_offset.d: New.
* gas/xtensa/all.exp: Run new test.
2004-11-04 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (set_intel_syntax): Allow % in symbol names when
intel syntax and no register prefix, allow $ in symbol names when
intel syntax.
(set_16bit_gcc_code_flag): Replace literal 'l' by LONG_MNEM_SUFFIX.
(intel_float_operand): Add fourth return value indicating math control
operations. Make classification more precise.
(md_assemble): Complain if memory operand of mov[sz]x has no size
specified.
(parse_insn): Translate word operands to floating point instructions
operating on integers as well as control instructions to short ones
as expected by AT&T syntax. Translate 'd' suffix to short one only for
floating point instructions operating on non-integer operands.
(match_template): Remove fldcw special case. Adjust q-suffix handling
to permit it on fild/fistp/fisttp in AT&T mode.
(process_suffix): Don't guess DefaultSize insns' suffix from
stackop_size for certain floating point control instructions. Guess
suffix for branch and [ls][gi]dt based on flag_code. Split error
messages for Intel and AT&T syntax, and make the condition more strict
for the former. Adjust suppressing of generation of operand size
overrides.
(intel parser): Allow the full set of MASM operators. Add FWORD, TBYTE,
OWORD, and XMMWORD operand size specifiers (TBYTE replaces XWORD). Add
more error checking.
* config/tc-i386.h (BYTE_PTR WORD_PTR DWORD_PTR QWORD_PTR XWORD_PTR
SHORT OFFSET_FLAT FLAT NONE_FOUND): Remove unused defines.
gas/testsuite/
2004-11-04 Jan Beulich <jbeulich@novell.com>
* gas/i386/i386.exp: Execute new tests intelbad and intelok.
* gas/i386/intelbad.[sl]: New test to check for various things not
permitted in Intel mode.
* gas/i386/intel.d, gas/i386/opcode.d, gas/i386/x86-64-opcode.d:
Adjust for change to segment register store.
* gas/i386/intelok.[sd]: New test to check various Intel mode specific
things get handled correctly.
* gas/i386/x86_64.[sd]: Remove unsupported constructs referring to
'high' and 'low' parts of an operand, which the parser previously
accepted while neither telling that it's not supported nor that it
ignored the remainder of the line following these supposed keywords.
include/opcode/
2004-11-04 Jan Beulich <jbeulich@novell.com>
* i386.h (sldx_Suf): Remove.
(FP, l_FP, sl_FP, x_FP): Don't imply IgnoreSize.
(q_FP): Define, implying no REX64.
(x_FP, sl_FP): Imply FloatMF.
(i386_optab): Split reg and mem forms of moving from segment registers
so that the memory forms can ignore the 16-/32-bit operand size
distinction. Adjust a few others for Intel mode. Remove *FP uses from
all non-floating-point instructions. Unite 32- and 64-bit forms of
movsx, movzx, and movd. Adjust floating point operations for the above
changes to the *FP macros. Add DefaultSize to floating point control
insns operating on larger memory ranges. Remove left over comments
hinting at certain insns being Intel-syntax ones where the ones
actually meant are already gone.
opcodes/
2004-11-04 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (Eq, Edqw, indirEp, Gdq, I1): Define.
(indirEb): Remove.
(Mp): Use f_mode rather than none at all.
(t_mode, dq_mode, dqw_mode, f_mode, const_1_mode): Define. t_mode
replaces what previously was x_mode; x_mode now means 128-bit SSE
operands.
(dis386): Make far jumps and calls have an 'l' prefix only in AT&T
mode. movmskpX's, pextrw's, and pmovmskb's first operands are Gdq.
pinsrw's second operand is Edqw.
(grps): 1-bit shifts' and rotates' second operands are I1. cmpxchg8b's
operand is Eq. movntq's and movntdq's first operands are EM. s[gi]dt,
fldenv, frstor, fsave, fstenv all should also have suffixes in Intel
mode when an operand size override is present or always suffixing.
More instructions will need to be added to this group.
(putop): Handle new macro chars 'C' (short/long suffix selector),
'I' (Intel mode override for following macro char), and 'J' (for
adding the 'l' prefix to far branches in AT&T mode). When an
alternative was specified in the template, honor macro character when
specified for Intel mode.
(OP_E): Handle new *_mode values. Correct pointer specifications for
memory operands. Consolidate output of index register.
(OP_G): Handle new *_mode values.
(OP_I): Handle const_1_mode.
(OP_ESreg, OP_DSreg): Generate pointer specifications. Indicate
respective opcode prefix bits have been consumed.
(OP_EM, OP_EX): Provide some default handling for generating pointer
specifications.
* config.bfd: Include 64-bit support for i[3-7]86-*-solaris2*.
* elf64-x86-64.c (elf64_x86_64_section_from_shdr): New function.
(elf_backend_section_from_shdr): Define.
binutils/
* readelf.c (get_x86_64_section_type_name): New function.
(get_section_type_name): Use it.
gas/
* config/tc-i386.c: Include "elf/x86-64.h".
(i386_elf_section_type): New function.
* config/tc-i386.h (md_elf_section_type): Define.
(i386_elf_section_type): New prototype.
gas/testsuite/
* gas/i386/i386.exp: Don't run divide test for targets where '/'
is a comment. Run x86-64-unwind for 64-bit ELF targets.
* gas/i386/x86-64-unwind.d, gas/i386/x86-64-unwind.s: New.
include/
* elf/common.h (PT_SUNW_EH_FRAME): Define.
* elf/x86-64.h (SHT_X86_64_UNWIND): Define.
ld/
* configure.tgt: Include elf_x86_64 for i[3-7]86-*-solaris2*.
* elf32-xtensa.c (elf32xtensa_size_opt): New global variable.
(xtensa_default_isa): Global variable moved here from xtensa-isa.c.
(elf32xtensa_no_literal_movement): New global variable.
(elf_howto_table): Add entries for new relocations.
(elf_xtensa_reloc_type_lookup): Handle new relocations.
(property_table_compare): When addresses are equal, compare sizes and
various property flags.
(property_table_matches): New.
(xtensa_read_table_entries): Extend to read new property tables. Add
output_addr parameter to indicate that output addresses should be used.
Use bfd_get_section_limit.
(elf_xtensa_find_property_entry): New.
(elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry.
(elf_xtensa_check_relocs): Handle new relocations.
(elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new
relocations. Use new xtensa-isa.h functions.
(build_encoding_error_message): Remove encode_result parameter. Add
new target_address parameter used to detect alignment errors.
(elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up
error handling. Use new is_operand_relocation function.
(elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data):
Use underbar macro for error messages. Formatting.
(get_const16_opcode): New.
(get_l32r_opcode): Add a separate flag for initialization.
(get_relocation_opnd): Operand number is no longer explicit in the
relocation. Change to decode the opcode and analyze its operands.
(get_relocation_slot): New.
(get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit.
Use new xtensa-isa.h functions to handle multislot instructions.
(is_l32r_relocation): Add bfd parameter. Use is_operand_relocation.
(get_asm_simplify_size, is_alt_relocation, is_operand_relocation,
insn_decode_len, insn_decode_opcode, check_branch_target_aligned,
check_loop_aligned, check_branch_target_aligned_address, narrowable,
widenable, narrow_instruction, widen_instruction, op_single_fmt_table,
get_single_format, init_op_single_format_table): New.
(elf_xtensa_do_asm_simplify): Add error_message parameter and use it
instead of calling _bfd_error_handler. Use new xtensa-isa.h functions.
(contract_asm_expansion): Add error_message parameter and pass it to
elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation
with R_XTENSA_SLOT0_OP.
(get_expanded_call_opcode): Extend to handle either L32R or CONST16
instructions. Use new xtensa-isa.h functions.
(r_reloc struct): Add new virtual_offset field.
(r_reloc_init): Add contents and content_length parameters. Set
virtual_offset field to zero. Add contents to target_offset field for
partial_inplace relocations.
(r_reloc_is_defined): Check for null.
(print_r_reloc): New debug function.
(source_reloc struct): Replace xtensa_operand field with pair of the
opcode and the operand position. Add is_abs_literal field.
(init_source_reloc): Specify operand by opcode/position pair. Set
is_abs_literal field.
(source_reloc_compare): When target_offsets are equal, compare other
fields to make sorting predictable.
(literal_value struct): Add is_abs_literal field.
(value_map_hash_table struct): Add has_last_loc and last_loc fields.
(init_literal_value): New.
(is_same_value): Replace with ...
(literal_value_equal): ... this function. Add comparisons of
virtual_offset and is_abs_literal fields.
(value_map_hash_table_init): Use bfd_zmalloc. Check for allocation
failure. Initialize has_last_loc field.
(value_map_hash_table_delete): New.
(hash_literal_value): Rename to ...
(literal_value_hash): ... this. Include is_abs_literal flag and
virtual_offset field in the hash value.
(get_cached_value): Rename to ...
(value_map_get_cached_value): ... this. Update calls to
literal_value_hash and literal_value_equal.
(add_value_map): Check for allocation failure. Update calls to
value_map_get_cached_value and literal_value_hash.
(text_action, text_action_list, text_action_t): New types.
(find_fill_action, compute_removed_action_diff, adjust_fill_action,
text_action_add, text_action_add_literal, offset_with_removed_text,
offset_with_removed_text_before_fill, find_insn_action,
print_action_list, print_removed_literals): New.
(offset_with_removed_literals): Delete.
(xtensa_relax_info struct): Add is_relaxable_asm_section, action_list,
fix_array, fix_array_count, allocated_relocs, relocs_count, and
allocated_relocs_count fields.
(init_xtensa_relax_info): Initialize new fields.
(reloc_bfd_fix struct): Add new translated field.
(reloc_bfd_fix_init): Add translated parameter and use it to set the
translated field.
(fix_compare, cache_fix_array): New.
(get_bfd_fix): Remove fix_list parameter and get all relax_info for the
section via get_xtensa_relax_info. Use cache_fix_array to set up
sorted fix_array and use bsearch instead of linear search.
(section_cache_t): New struct.
(init_section_cache, section_cache_section, clear_section_cache): New.
(ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types.
(init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds,
extend_ebb_bounds_forward, extend_ebb_bounds_backward,
insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action):
New.
(retrieve_contents): Use bfd_get_section_limit.
(elf_xtensa_relax_section): Add relocations_analyzed flag. Update call
to compute_removed_literals. Free value_map_hash_table when no longer
needed.
(analyze_relocations): Check is_relaxable_asm_section flag. Call
compute_text_actions for all sections.
(find_relaxable_sections): Mark sections as relaxable if they contain
ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init
call. Increment relax_info src_count field only for appropriate
relocation types. Remove is_literal_section check.
(collect_source_relocs): Use bfd_get_section_limit. Adjust calls to
r_reloc_init and find_associated_l32r_irel. Check
is_relaxable_asm_section flag. Handle L32R instructions with absolute
literals. Pass is_abs_literal flag to init_source_reloc.
(is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for
CONST16 instructions. Adjust calls to r_reloc_init and
pcrel_reloc_fits. Handle weak symbols conservatively.
(find_associated_l32r_irel): Add bfd parameter and pass it to
is_l32r_relocation.
(compute_text_actions, compute_ebb_proposed_actions,
compute_ebb_actions, check_section_ebb_pcrels_fit,
check_section_ebb_reduces, text_action_add_proposed,
compute_fill_extra_space): New.
(remove_literals): Replace with ...
(compute_removed_literals): ... this function. Call
init_section_cache. Use bfd_get_section_limit. Sort internal_relocs.
Call xtensa_read_table_entries to get the property table. Skip
relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new
is_removable_literal, remove_dead_literal, and
identify_literal_placement functions.
(get_irel_at_offset): Rewrite to use bsearch on sorted relocations
instead of linear search.
(is_removable_literal, remove_dead_literal,
identify_literal_placement): New.
(relocations_reach): Update check for literal not referenced by any
PC-relative relocations. Adjust call to pcrel_reloc_fits.
(coalesce_shared_literal, move_shared_literal): New.
(relax_section): Use bfd_get_section_limit. Call
translate_section_fixes. Update calls to r_reloc_init and
offset_with_removed_text. Check new is_relaxable_asm_section flag.
Add call to pin_internal_relocs. Add special handling for
R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset
info to calculate new addend_displacement variable. Replace code for
deleting literals with more general code to perform the actions
determined by the action_list for the section.
(translate_section_fixes, translate_reloc_bfd_fix): New.
(translate_reloc): Check new is_relaxable_asm_section flag. Call
find_removed_literal only if is_operand_relocation. Update call to
offset_with_removed_text. Use new target_offset and removed_bytes
variables.
(move_literal): New.
(relax_property_section): Use bfd_get_section_limit. Set new
is_full_prop_section flag and handle new property tables. Update calls
to r_reloc_init and offset_with_removed_text. Check
is_relaxable_asm_section flag. Handle expansion of zero-sized
unreachable entries, with use of offset_with_removed_text_before_fill.
For relocatable links, combine entries only for literal tables.
(relax_section_symbols): Check is_relaxable_asm_section flag. Update
calls to offset_with_removed_text. Translate st_size field for
function symbols.
(do_fix_for_relocatable_link): Change to return bfd_boolean to indicate
failure. Add contents parameter. Update call to get_bfd_fix. Update
call to r_reloc_init. Call _bfd_error_handler and return FALSE for
R_XTENSA_ASM_EXPAND relocs.
(do_fix_for_final_link): Add input_bfd and contents parameters. Update
call to get_bfd_fix. Include offset from contents for partial_inplace
relocations.
(is_reloc_sym_weak): New.
(pcrel_reloc_fits): Use new xtensa-isa.h functions.
(prop_sec_len): New.
(xtensa_is_property_section): Handle new property sections.
(is_literal_section): Delete.
(internal_reloc_compare): When r_offset matches, compare r_info and
r_addend to make sorting predictable.
(internal_reloc_matches): New.
(xtensa_get_property_section_name): Handle new property sections.
(xtensa_get_property_predef_flags): New.
(xtensa_callback_required_dependence): Use bfd_get_section_limit.
Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init.
* xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c.
(xtisa_errno, xtisa_error_msg): New variables.
(xtensa_isa_errno, xtensa_isa_error_msg): New.
(xtensa_insnbuf_alloc): Add error handling.
(xtensa_insnbuf_to_chars): Add num_chars parameter. Update to
use xtensa_format_decode. Add error handling.
(xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the
instruction length to find the number of bytes to copy.
(xtensa_isa_init): Add error handling. Replace calls to
xtensa_load_isa and xtensa_extend_isa with code to initialize lookup
tables in the xtensa_modules structure.
(xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa,
xtensa_extend_isa): Delete.
(xtensa_isa_free): Change to only free lookup tables.
(opname_lookup_compare): Replace with ...
(xtensa_isa_name_compare): ... this function. Use strcasecmp.
(xtensa_insn_maxlength): Rename to ...
(xtensa_isa_maxlength): ... this.
(xtensa_insn_length): Delete.
(xtensa_insn_length_from_first_byte): Replace with ...
(xtensa_isa_length_from_chars): ... this function.
(xtensa_num_opcodes): Rename to ...
(xtensa_isa_num_opcodes): ... this.
(xtensa_isa_num_pipe_stages, xtensa_isa_num_formats,
xtensa_isa_num_regfiles, xtensa_isa_num_stages,
xtensa_isa_num_sysregs, xtensa_isa_num_interfaces,
xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup,
xtensa_format_decode, xtensa_format_encode, xtensa_format_length,
xtensa_format_num_slots, xtensa_format_slot_nop_opcode,
xtensa_format_get_slot, xtensa_format_set_slot): New functions.
(xtensa_opcode_lookup): Add error handling.
(xtensa_decode_insn): Replace with ...
(xtensa_opcode_decode): ... this function, with new format and
slot parameters. Add error handling.
(xtensa_encode_insn): Replace with ...
(xtensa_opcode_encode): ... this function, which does the encoding via
one of the entries in the "encode_fns" array. Add error handling.
(xtensa_opcode_name): Add error handling.
(xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop,
xtensa_opcode_is_call): New.
(xtensa_num_operands): Replace with ...
(xtensa_opcode_num_operands): ... this function. Add error handling.
(xtensa_opcode_num_stateOperands,
xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses,
xtensa_opcode_funcUnit_use, xtensa_operand_name,
xtensa_operand_is_visible): New.
(xtensa_get_operand, xtensa_operand_kind): Delete.
(xtensa_operand_inout): Add error handling and special-case for
"sout" operands.
(xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to
operate on one slot of an instruction. Added error handling.
(xtensa_operand_encode): Handle default operands with no encoding
functions. Check for success by comparing against decoded value.
Add error handling.
(xtensa_operand_decode): Handle default operands. Return decoded value
through argument pointer. Add error handling.
(xtensa_operand_is_register, xtensa_operand_regfile,
xtensa_operand_num_regs, xtensa_operand_is_known_reg): New.
(xtensa_operand_isPCRelative): Rename to ...
(xtensa_operand_is_PCrelative): ... this. Add error handling.
(xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value
through argument pointer. Add error handling.
(xtensa_stateOperand_state, xtensa_stateOperand_inout,
xtensa_interfaceOperand_interface, xtensa_regfile_lookup,
xtensa_regfile_lookup_shortname, xtensa_regfile_name,
xtensa_regfile_shortname, xtensa_regfile_view_parent,
xtensa_regfile_num_bits, xtensa_regfile_num_entries,
xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits,
xtensa_state_is_exported, xtensa_sysreg_lookup,
xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number,
xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name,
xtensa_interface_num_bits, xtensa_interface_inout,
xtensa_interface_has_side_effect, xtensa_funcUnit_lookup,
xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New.
* xtensa-modules.c: Rewrite to use new data structures.
* reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16,
BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP,
BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP,
BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP,
BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP,
BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP,
BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP,
BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP,
BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP,
BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT,
BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT,
BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT,
BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT,
BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT,
BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT,
BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT,
BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations.
* Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies.
* Makefile.in: Regenerate.
* bfd-in2.h: Likewise.
* libbfd.h: Likewise.
gas ChangeLog
* config/tc-xtensa.c (absolute_literals_supported): New global flag.
(UNREACHABLE_MAX_WIDTH): Define.
(XTENSA_FETCH_WIDTH): Delete.
(cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end,
prefer_const16, prefer_l32r): New global variables.
(LIT4_SECTION_NAME): Define.
(lit4_state struct): Add lit4_seg_name and lit4_seg fields.
(XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.
(frag_flags struct): New.
(xtensa_block_info struct): Move from tc-xtensa.h. Add flags field.
(subseg_map struct): Add cur_total_freq and cur_target_freq fields.
(bitfield, bit_is_set, set_bit, clear_bit): Define.
(MAX_FORMATS): Define.
(op_placement_info struct, op_placement_table): New.
(O_pltrel, O_hi16, O_lo16): Define.
(directiveE enum): Rename directive_generics to directive_transform.
Delete directive_relax. Add directive_schedule,
directive_absolute_literals, and directive_last_directive.
(directive_info): Rename "generics" to "transform". Delete "relax".
Add "schedule" and "absolute-literals".
(directive_state): Adjust entries to match changes in directive_info.
(xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h.
(xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode,
xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New.
(xtensa_j_opcode, xtensa_rsr_opcode): Delete.
(align_only_targets, software_a0_b_retw_interlock,
software_avoid_b_j_loop_end, maybe_has_b_j_loop_end,
software_avoid_short_loop, software_avoid_close_loop_end,
software_avoid_all_short_loops, specific_opcode): Delete.
(warn_unaligned_branch_targets): New.
(workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop,
workaround_close_loop_end, workaround_all_short_loops): Default FALSE.
(option_[no_]link_relax, option_[no_]transform,
option_[no_]absolute_literals, option_warn_unaligned_targets,
option_prefer_l32r, option_prefer_const16, option_target_hardware):
New enum values.
(option_[no_]align_only_targets, option_literal_section_name,
option_text_section_name, option_data_section_name,
option_bss_section_name, option_eb, option_el): Delete.
(md_longopts): Add entries for: [no-]transform, [no-]absolute-literals,
warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax,
and target-hardware. Delete entries for [no-]target-align-only,
literal-section-name, text-section-name, data-section-name, and
bss-section-name.
(md_parse_option): Handle new options and remove old ones. Accept but
ignore [no-]density options. Warn for [no-]generics and [no-]relax
and treat them as [no-]transform.
(md_show_usage): Add new options and remove old ones.
(xtensa_setup_hw_workarounds): New.
(md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add
"long", "short", "loc" and "frequency" entries.
(use_generics): Rename to ...
(use_transform): ... this function. Add past_xtensa_end check.
(use_longcalls): Add past_xtensa_end check.
(code_density_available, can_relax): Delete.
(do_align_targets): New.
(get_directive): Accept dashes in directive names. Warn about
[no-]generics and [no-]relax directives and treat them as
[no-]transform.
(xtensa_begin_directive): Call md_flush_pending_output only for some
directives. Check for directives inside instruction bundles. Warn
about deprecated ".begin literal" usage. Warn and ignore [no-]density
directives. Handle new directives. Check generating_literals flag
for literal_prefix.
(xtensa_end_directive): Check for directives inside instruction
bundles. Warn and ignore [no-]density directives. Handle new
directives. Call xtensa_set_frag_assembly_state.
(xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc,
xtensa_dwarf2_emit_insn): New.
(xtensa_literal_position): Call md_flush_pending_output. Do not check
use_literal_section flag.
(xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute
literals. Use xtensa_elf_cons to parse the expression.
(xtensa_literal_prefix): Do not check use_literal_section. Support
".lit4" sections for absolute literals. Change prefix convention to
replace ".text" (or ".t" in a linkonce section). No need to call
subseg_set.
(xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New.
(expression_end): Handle closing braces and colons.
(PLT_SUFFIX, plt_suffix): Delete.
(expression_maybe_register): Use new xtensa-isa.h functions. Use
xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16
and O_hi16 expressions as well.
(tokenize_arguments): Handle closing braces and colons.
(parse_arguments): Use new xtensa-isa.h functions. Handle "invisible"
operands and paired register syntax.
(get_invisible_operands): New.
(xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use
new xtensa-isa.h functions.
(xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New.
(xg_translate_idioms): Check if inside bundle. Use use_transform.
Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density
instructions. Use xtensa_translate_zero_immed.
(operand_is_immed, operand_is_pcrel_label): Delete.
(get_relaxable_immed): Use new xtensa-isa.h functions.
(get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h
functions.
(xtensa_print_insn_table, print_vliw_insn): New.
(is_direct_call_opcode): Use new xtensa-isa.h functions.
(is_call_opcode, is_loop_opcode, is_conditional_branch_opcode,
is_branch_or_jump_opcode): Delete.
(is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New.
(opnum_to_reloc, reloc_to_opnum): Delete.
(xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new
xtensa-isa.h functions. Operate on one slot of an instruction.
(xtensa_insnbuf_set_immediate_field, is_negatable_branch,
xg_get_insn_size): Delete.
(xg_get_build_instr_size): Use xg_get_single_size.
(xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to
xg_build_widen_table. Use xg_get_single_size.
(xg_get_max_narrow_insn_size): Delete.
(xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size,
xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use
xg_get_single_size.
(xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and
OP_OPERAND_LOW16U. Check xg_valid_literal_expression.
(xg_expand_to_stack, xg_expand_narrow): Update calls to
xg_build_widen_table. Use xg_get_single_size.
(xg_immeds_fit): Use new xtensa-isa.h functions. Update call to
xg_check_operand.
(xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and
treat weak symbols conservatively.
(xg_check_operand): Use new xtensa-isa.h functions.
(is_dnrange): Delete.
(xg_assembly_relax): Inline previous calls to tinsn_copy.
(xg_finish_frag): Specify separate relax states for the frag and slot0.
(is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new
xtensa-isa.h functions.
(xg_instruction_matches_option_term, xg_instruction_matches_or_options,
xg_instruction_matches_options): New.
(xg_instruction_matches_rule): Handle O_register expressions. Call
xg_instruction_matches_options.
(transition_rule_cmp): New.
(xg_instruction_match): Update call to xg_build_simplify_table.
(xg_build_token_insn): Record loc fields.
(xg_simplify_insn): Check is_specific_opcode field and
density_supported flag.
(xg_expand_assembly_insn): Skip checking code_density_available. Use
new xtensa-isa.h functions. Call use_transform instead of can_relax.
(xg_assemble_literal): Add error handling for O_big. Call
record_alignment. Handle O_pltrel.
(xg_valid_literal_expression): New.
(xg_assemble_literal_space): Add slot parameter. Remove call to
set_expr_symbol_offset. Add call to record_alignment. Update call to
xg_finish_frag.
(xg_emit_insn): Delete.
(xg_emit_insn_to_buf): Add format parameter. Update calls to
xg_add_opcode_fix and xtensa_insnbuf_to_chars.
(xg_add_opcode_fix): Change opcode parameter to tinsn and add format
and slot parameters. Handle new "alternate" relocations for absolute
literals and CONST16 instructions. Check for bad uses of O_lo16 and
O_hi16. Use new xtensa-isa.h functions.
(xg_assemble_tokens): Delete.
(is_register_writer): Use new xtensa-isa.h functions.
(is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of
old-style RSR from LCOUNT.
(next_frag_opcode): Delete.
(next_frag_opcode_is_loop, next_frag_format_size, frag_format_size,
update_next_frag_state): New.
(update_next_frag_nop_state): Delete.
(next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop.
(xtensa_mark_literal_pool_location): Check use_literal_section flag and
the state of the absolute-literals directive. Add calls to
record_alignment and xtensa_set_frag_assembly_state. Call
xtensa_switch_to_non_abs_literal_fragment instead of
xtensa_switch_to_literal_fragment.
(build_nop): New.
(assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars.
(get_expanded_loop_offset): Change check for undefined opcode to an
assertion.
(xtensa_set_frag_assembly_state, relaxable_section,
xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets,
xtensa_find_unaligned_loops, xg_apply_tentative_value): New.
(md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1.
Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes.
Call init_op_placement_info_table and xtensa_set_frag_assembly_state.
(xtensa_init_fix_data): New.
(xtensa_frob_label): Reset label symbol to the current frag. Check
do_align_targets and generating_literals flag. Propagate frequency
info to new alignment frag. Call xtensa_set_frag_assembly_state.
(xtensa_unrecognized_line): New.
(xtensa_flush_pending_output): Check if inside a bundle. Add a call
to xtensa_set_frag_assembly_state.
(error_reset_cur_vinsn): New.
(md_assemble): Remove check for literal frag. Remove call to
istack_init. Call use_transform instead of use_generics. Parse
explicit instruction format specifiers. Move code for
a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call
error_reset_cur_vinsn on errors. Add call to get_invisible_operands.
Add dwarf2_where call. Remote automatic alignment for ENTRY
instructions. Move call to xtensa_clear_insn_labels to the end.
Rearrange to handle bundles.
(xtensa_cons_fix_new): Delete.
(xtensa_handle_align): New.
(xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove
assignment to is_no_density field.
(md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc
instead of reloc_to_opnum. Handle "alternate" relocations.
(xtensa_force_relocation, xtensa_check_inside_bundle,
xtensa_elf_section_change_hook): New.
(xtensa_symbol_new_hook): Delete.
(xtensa_fix_adjustable): Check for difference of symbols with an
offset. Check for external and weak symbols.
(md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs.
(md_estimate_size_before_relax): Return expansion for the first slot.
(tc_gen_reloc): Handle difference of symbols by producing
XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference
into the output. Handle new XTENSA_SLOT*_OP relocs by storing the
tentative values into the output when linkrelax is set.
(XTENSA_PROP_SEC_NAME): Define.
(xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags.
Create literal tables only if using literal sections. Create new
property tables instead of old instruction tables. Check for unaligned
branch targets and loops.
(finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes,
new_resource_table, clear_resource_table, resize_resource_table,
resources_available, reserve_resources, release_resources,
opcode_funcUnit_use_unit, opcode_funcUnit_use_stage,
resources_conflict, xg_find_narrowest_format, relaxation_requirements,
bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New.
(xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end
flag. Update checks for workaround options. Call
xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns.
(xtensa_cleanup_align_frags): Add special case for branch targets.
Check for and mark unreachable frags.
(xtensa_fix_target_frags): Remove use of align_only_targets flag.
Use RELAX_LOOP_END_BYTES in special case for negatable branch at the
end of a zero-overhead loop body.
(frag_can_negate_branch): Handle instructions with multiple slots.
Use new xtensa-isa.h functions
(xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range,
xtensa_mark_zcl_first_insns): New.
(xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if
transformations are disabled.
(next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle
multislot instructions.
(xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags):
Likewise. Also error if transformations are disabled.
(unrelaxed_frag_max_size): New.
(unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new
xtensa-isa.h functions.
(xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use
xtensa_opcode_is_loop instead of is_loop_opcode.
(get_text_align_power): Replace as_fatal with assertion.
(get_text_align_fill_size): Iterate instead of using modulus when
use_nops is false.
(get_noop_aligned_address): Assert that this is for a machine-dependent
RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop,
xg_get_single_size, and frag_format_size.
(get_widen_aligned_address): Rename to ...
(get_aligned_diff): ... this function. Add max_diff parameter.
Remove handling of rs_align/rs_align_code frags. Use
next_frag_format_size, get_text_align_power, get_text_align_fill_size,
next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff
and pass it back to caller.
(xtensa_relax_frag): Use relax_frag_loop_align. Add code for new
RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN,
RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen.
(relax_frag_text_align): Rename to ...
(relax_frag_loop_align): ... this function. Assume loops can only be
in the first slot of an instruction.
(relax_frag_add_nop): Use assemble_nop instead of constructing an OR
instruction. Remove call to frag_wane.
(relax_frag_narrow): Rename to ...
(relax_frag_for_align): ... this function. Extend to handle
RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with
RELAX_NARROW for the first slot.
(find_address_of_next_align_frag, bytes_to_stretch): New.
(future_alignment_required): Use find_address_of_next_align_frag and
bytes_to_stretch. Look ahead to subsequent frags to make smarter
alignment decisions.
(relax_frag_immed): Add format, slot, and estimate_only parameters.
Check if transformations are enabled for b_j_loop_end workaround.
Use new xtensa-isa.h functions and handle multislot instructions.
Update call to xg_assembly_relax.
(md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE,
RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP
frag types.
(convert_frag_narrow): Add segP, format and slot parameters. Call
convert_frag_immed for branch instructions. Adjust calls to
tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use
xg_get_single_size and xg_get_single_format.
(convert_frag_fill_nop): New.
(convert_frag_immed): Add format and slot parameters. Handle multislot
instructions and use new xtensa-isa.h functions. Update calls to
tinsn_immed_from_frag and xg_assembly_relax. Check if transformations
enabled for b_j_loop_end workaround. Use build_nop instead of
assemble_nop. Check is_specific_opcode flag. Check for unreachable
frags. Use xg_get_single_size. Handle O_pltrel.
(fix_new_exp_in_seg): Remove check for old plt flag.
(convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and
xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check
for loop opcode to an assertion. Mark all frags up to the end of the
loop as not transformable.
(get_last_insn_flags, set_last_insn_flags): Use get_subseg_info.
(get_subseg_info): New.
(xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null
check for dest_seg.
(xtensa_switch_to_literal_fragment): Rewrite to handle absolute
literals and use xtensa_switch_to_non_abs_literal_fragment otherwise.
(xtensa_switch_to_non_abs_literal_fragment): New.
(cache_literal_section): Add is_code parameter and pass it through to
retrieve_literal_seg.
(retrieve_literal_seg): Add is_code parameter and use it to set the
flags on the literal section. Handle case where head parameter is 0.
(get_frag_is_no_transform, set_frag_is_specific_opcode,
set_frag_is_no_transform): New.
(xtensa_create_property_segments): Add end_property_function parameter
and pass it through to add_xt_block_frags. Call bfd_get_section_flags
and skip SEC_DEBUGGING and !SEC_ALLOC sections.
(xtensa_create_xproperty_segments, section_has_xproperty): New.
(add_xt_block_frags): Add end_property_function parameter and call it
if it is non-zero. Call xtensa_frag_flags_init.
(xtensa_frag_flags_is_empty, xtensa_frag_flags_init,
get_frag_property_flags, frag_flags_to_number,
xtensa_frag_flags_combinable, xt_block_aligned_size,
xtensa_xt_block_combine, add_xt_prop_frags,
init_op_placement_info_table, opcode_fits_format_slot,
xg_get_single_size, xg_get_single_format): New.
(istack_push): Inline call to tinsn_copy.
(tinsn_copy): Delete.
(tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and
CONST16 opcodes. Handle O_big, O_illegal, and O_absent.
(tinsn_has_complex_operands): Handle O_hi16 and O_lo16.
(tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h
functions. Handle invisible operands.
(tinsn_to_slotbuf): New.
(tinsn_check_arguments): Use new xtensa-isa.h functions.
(tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn,
vinsn_from_chars, and xg_free_vinsn.
(tinsn_from_insnbuf): New.
(tinsn_immed_from_frag): Add slot parameter and handle multislot
instructions. Handle symbol differences.
(get_num_stack_text_bytes): Use xg_get_single_size.
(xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes,
xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register,
get_expr_register, set_expr_symbol_offset_diff): New.
* config/tc-xtensa.h (MAX_SLOTS): Define.
(xtensa_relax_statesE): Move from tc-xtensa.c. Add
RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS,
RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and
RELAX_NONE types.
(RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c.
(xtensa_frag_type struct): Add is_assembly_state_set,
use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode,
is_align, is_text_align, alignment, and is_first_loop_insn fields.
Replace is_generics and is_relax fields by is_no_transform field.
Delete is_text and is_longcalls fields. Change text_expansion and
literal_expansion to arrays of MAX_SLOTS entries. Add arrays of
per-slot information: literal_frags, slot_subtypes, slot_symbols,
slot_sub_symbols, and slot_offsets. Add fr_prev field.
(xtensa_fix_data struct): New.
(xtensa_symfield_type struct): Delete plt field.
(xtensa_block_info struct): Move definition to tc-xtensa.h. Add
forward declaration here.
(xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec.
(XTENSA_SECTION_RENAME): Undefine.
(TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT,
tc_unrecognized_line, md_do_align, md_elf_section_change_hook,
HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define.
(TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete.
(unit_num_copies_func, opcode_num_units_func,
opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New.
(resource_table struct): New.
* config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10.
(TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype,
literal_space, symbol, sub_symbol, offset, and literal_frag fields.
(tinsn_copy): Delete prototype.
(vliw_insn struct): New.
* config/xtensa-relax.c (insn_pattern_struct): Add options field.
(widen_spec_list): Add option conditions for density and boolean
instructions. Add expansions using CONST16 and conditions for using
CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for
predicted branches.
(simplify_spec_list): Add option conditions for density instructions.
Add entry for NOP instruction.
(append_transition): Add cmp function pointer parameter and use it to
insert the new entry in order.
(operand_function_LOW16U, operand_function_HI16U): New.
(xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle
OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
(enter_opname, split_string): Use xstrdup instead of strdup.
(init_insn_pattern): Initialize new options field.
(clear_req_or_option_list, clear_req_option_list,
clone_req_or_option_list, clone_req_option_list, parse_option_cond):
New.
(parse_insn_pattern): Parse option conditions.
(transition_applies): New.
(build_transition): Use new xtensa-isa.h functions. Fix incorrectly
swapped last arguments in calls to append_constant_value_condition.
Call clone_req_option_list. Add warning about invalid opcode.
Handle LOW16U and HI16U function names.
(build_transition_table): Add cmp parameter and use it in calls to
append_transition. Use new xtensa-isa.h functions. Check
transition_applies before adding entries.
(xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and
pass it through to build_transition_table.
* config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList,
ReqOption, transition_cmp_fn): New types.
(OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
(transition_rule struct): Add options field.
* doc/as.texinfo (Overview): Update Xtensa options.
* doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density,
--[no-]relax, and --[no-]generics options. Update descriptions of
--text-section-literals and --[no-]longcalls. Add
--[no-]absolute-literals and --[no-]transform.
(Xtensa Syntax): Add description of syntax for FLIX instructions.
Remove use of "generic" and "specific" terminology for opcodes.
(Xtensa Registers): Generalize the syntax description to include
user-defined register files.
(Xtensa Automatic Alignment): Update.
(Xtensa Branch Relaxation): Mention limitation of unconditional jumps.
(Xtensa Call Relaxation): Linker can now remove most of the overhead.
(Xtensa Directives): Remove confusing rules about precedence.
(Density Directive, Relax Directive): Delete.
(Schedule Directive): New.
(Generics Directive): Rename to ...
(Transform Directive): ... this node.
(Literal Directive): Update for absolute literals. Missing
literal_position directive is now an error.
(Literal Position Directive): Update for absolute literals.
(Freeregs Directive): Delete.
(Absolute Literals Directive): New.
(Frame Directive): Minor editing.
* Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf):
Update dependencies.
* Makefile.in: Regenerate.
gas/testsuite ChangeLog
* gas/xtensa/all.exp: Adjust expected error message for j_too_far.
Change entry_align test to expect an error.
* gas/xtensa/entry_misalign2.s: Use no-transform instead of
no-generics directives.
include ChangeLog
* xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS,
XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New.
(XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete.
* xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete.
(config_sturct struct): Delete.
(XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE,
XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN,
XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP,
XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL,
XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define.
(xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New.
(xtensa_insn_decode_fn): Rename to ...
(xtensa_opcode_decode_fn): ... this.
(xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn,
xtensa_undo_reloc_fn): Update.
(xtensa_encoding_template_fn): Delete.
(xtensa_opcode_encode_fn, xtensa_format_decode_fn,
xtensa_length_decode_fn): New.
(xtensa_format_internal, xtensa_slot_internal): New types.
(xtensa_operand_internal): Delete operand_kind, inout, isPCRelative,
get_field, and set_field fields. Add name, field_id, regfile,
num_regs, and flags fields.
(xtensa_arg_internal): New type.
(xtensa_iclass_internal): Change operands field to array of
xtensa_arg_internal. Add num_stateOperands, stateOperands,
num_interfaceOperands, and interfaceOperands fields.
(xtensa_opcode_internal): Delete length, template, and iclass fields.
Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses.
(opname_lookup_entry): Delete.
(xtensa_regfile_internal, xtensa_interface_internal,
xtensa_funcUnit_internal, xtensa_state_internal,
xtensa_sysreg_internal, xtensa_lookup_entry): New.
(xtensa_isa_internal): Replace opcode_table field with opcodes field.
Change type of opname_lookup_table. Delete num_modules,
module_opcode_base, module_decode_fn, config, and has_density fields.
Add num_formats, formats, format_decode_fn, length_decode_fn,
num_slots, slots, num_fields, num_operands, operands, num_iclasses,
iclasses, num_regfiles, regfiles, num_states, states,
state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table,
max_sysreg_num, sysreg_table, num_interfaces, interfaces,
interface_lookup_table, num_funcUnits, funcUnits and
funcUnit_lookup_table fields.
(xtensa_isa_module, xtensa_isa_modules): Delete.
(xtensa_isa_name_compare): New prototype.
(xtisa_errno, xtisa_error_msg): New.
* xtensa-isa.h (XTENSA_ISA_VERSION): Define.
(xtensa_isa): Change type.
(xtensa_operand): Delete.
(xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg,
xtensa_interface, xtensa_funcUnit, xtensa_isa_status,
xtensa_funcUnit_use): New types.
(libisa_module_specifier): Delete.
(xtensa_isa_errno, xtensa_isa_error_msg): New prototypes.
(xtensa_insnbuf_free, xtensa_insnbuf_to_chars,
xtensa_insnbuf_from_chars): Update prototypes.
(xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa,
xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn,
xtensa_encode_insn, xtensa_insn_length,
xtensa_insn_length_from_first_byte, xtensa_num_operands,
xtensa_operand_kind, xtensa_encode_result,
xtensa_operand_isPCRelative): Delete.
(xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field,
xtensa_operand_set_field, xtensa_operand_encode,
xtensa_operand_decode, xtensa_operand_do_reloc,
xtensa_operand_undo_reloc): Update prototypes.
(xtensa_isa_maxlength, xtensa_isa_length_from_chars,
xtensa_isa_num_pipe_stages, xtensa_isa_num_formats,
xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states,
xtensa_isa_num_sysregs, xtensa_isa_num_interfaces,
xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup,
xtensa_format_decode, xtensa_format_encode, xtensa_format_length,
xtensa_format_num_slots, xtensa_format_slot_nop_opcode,
xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode,
xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump,
xtensa_opcode_is_loop, xtensa_opcode_is_call,
xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands,
xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses,
xtensa_opcode_funcUnit_use, xtensa_operand_name,
xtensa_operand_is_visible, xtensa_operand_is_register,
xtensa_operand_regfile, xtensa_operand_num_regs,
xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative,
xtensa_stateOperand_state, xtensa_stateOperand_inout,
xtensa_interfaceOperand_interface, xtensa_regfile_lookup,
xtensa_regfile_lookup_shortname, xtensa_regfile_name,
xtensa_regfile_shortname, xtensa_regfile_view_parent,
xtensa_regfile_num_bits, xtensa_regfile_num_entries,
xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits,
xtensa_state_is_exported, xtensa_sysreg_lookup,
xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number,
xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name,
xtensa_interface_num_bits, xtensa_interface_inout,
xtensa_interface_has_side_effect, xtensa_funcUnit_lookup,
xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes.
* elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32,
R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations.
(XTENSA_PROP_SEC_NAME): Define.
(property_table_entry): Add flags field.
(XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.
ld ChangeLog
* ld.texinfo (Xtensa): Describe new linker relaxation to optimize
assembler-generated longcall sequences. Describe new --size-opt
option.
* emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section.
* emultempl/xtensaelf.em (remove_section,
replace_insn_sec_with_prop_sec, replace_instruction_table_sections,
elf_xtensa_after_open): New.
(OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT,
OPTION_NO_LITERAL_MOVEMENT): Define.
(elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals.
(PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement.
(PARSE_AND_LIST_OPTIONS): Add --size-opt.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT,
OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT.
(LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open.
* scripttempl/elfxtensa.sc: Update with changes from elf.sc.
* Makefile.am (eelf32xtensa.c): Update dependencies.
* Makefile.in: Regenerate.
ld/testsuite ChangeLog
* ld-xtensa/lcall1.s: Use .literal directive.
* ld-xtensa/lcall2.s: Align function entry.
* ld-xtensa/coalesce2.s: Likewise.
opcodes ChangeLog
* xtensa-dis.c (state_names): Delete.
(fetch_data): Use xtensa_isa_maxlength.
(print_xtensa_operand): Replace operand parameter with opcode/operand
pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions.
(print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot
instruction bundles. Use xmalloc instead of malloc.
to build the second and third fixups for a composite relocation.
(macro_read_relocs): New function.
(macro_build): Use it.
(s_cpsetup): Pass all three composite relocation codes to macro_build.
Simplify fragging code accordingly.
(s_gpdword): Use fix_new rather than fix_new_exp for the second part
of the composite relocation. Set fx_tcbit in both fixups.
* gas/i386/secrel.s: Pad .rdata out to 16 byte boundary.
* gas/i386/secrel.d: Adjust to suit.
ld/testsuite/
* ld-pe/secrel1.s: Pad .rdata out to 16 byte boundary.
* ld-pe/secrel.d: Adjust to suit.
* frv.cpu (cfmovs): Change UNIT attribute to FMALL.
opcodes/
* frv-desc.[ch], frv-opc.[ch]: Regenerated.
gas/testsuite/
* gas/frv/fr550-pack1.[sd]: New test.
* gas/frv/allinsn.exp: Run it.
altmac2.[sd]: ... to here.
excl.s: New.
gas.exp: Suppress both tests for a few targets known to break. Run the new
(split out) test only when the target doesn't use '!' as a comment character.
* gas/sh/basic.exp: Don't do sh2a test for sh5.
* gas/sh/sh2a.d: Match elf32-sh* format too.
[ld/testsuite]
* ld-sh/sh64/crange3-cmpct.rd: Update.
* ld-sh/sh64/crange3-media.rd: Update.
* mips-opc.c (mips_builtin_opcodes): Move coprocessor 2
move/branch operations to the bottom so that VR5400 multimedia
instructions take precedence in disassembly.
gas/testsuite/
* gas/mips/vr5400.d: Update for a correct disassembly of
"racm.ob".
* mips-opc.c (mips_builtin_opcodes): Remove the MIPS32
ISA-specific "break" encoding.
gas/testsuite/
* gas/mips/mips32.s: Adjust for the unified "break" syntax. Add
another "break" case. Update the comment accordingly.
* gas/mips/set-arch.s: Likewise.
* gas/mips/mips32.d: Adjust for the new output.
* gas/mips/set-arch.d: Likewise.
(reloc_needs_lo_p): Only return true if HAVE_IN_PLACE_ADDENDS.
(mips_frob_file): Rework so that only a single pass through the
relocs is needed. Allow %lo()s to have higher offsets than their
corresponding %hi()s or %got()s.
testsuite/
* gas/mips/elf{,el}-rel.d: Adjust so that the earliest %hi() matches
the earliest %lo().
* gas/mips/elf-rel11.d: Don't expect the relocs to be reordered.
* gas/mips/elf-rel20.[sd]: New test.
* gas/mips/mips.exp: Run it.
Actually add these files:
2004-05-28 Andrew Stubbs <andrew.stubbs@superh.com>
* testsuite/gas/sh/arch: New directory.
* testsuite/gas/sh/arch/arch.exp: New test script.
* testsuite/gas/sh/arch/arch_expected.txt: New file.
* testsuite/gas/sh/arch/sh.s: New file.
* testsuite/gas/sh/arch/sh2.s: New file.
* testsuite/gas/sh/arch/sh-dsp.s: New file.
* testsuite/gas/sh/arch/sh2e.s: New file.
* testsuite/gas/sh/arch/sh3-nommu.s: New file.
* testsuite/gas/sh/arch/sh3.s: New file.
* testsuite/gas/sh/arch/sh3-dsp.s: New file.
* testsuite/gas/sh/arch/sh3e.s: New file.
* testsuite/gas/sh/arch/sh4-nommu-nofpu.s: New file.
* testsuite/gas/sh/arch/sh4-nofpu.s: New file.
* testsuite/gas/sh/arch/sh4.s: New file.
* testsuite/gas/sh/arch/sh4a-nofpu.s: New file.
* testsuite/gas/sh/arch/sh4al-dsp.s: New file.
ld/testsuite:
Actually add these files:
2004-05-28 Andrew Stubbs <andrew.stubbs@superh.com>
* testsuite/ld-sh/arch/arch.exp: New test script.
* testsuite/ld-sh/arch/arch_expected.txt: New file.
* testsuite/ld-sh/arch/sh.s: New file.
* testsuite/ld-sh/arch/sh2.s: New file.
* testsuite/ld-sh/arch/sh-dsp.s: New file.
* testsuite/ld-sh/arch/sh2e.s: New file.
* testsuite/ld-sh/arch/sh3-nommu.s: New file.
* testsuite/ld-sh/arch/sh3.s: New file.
* testsuite/ld-sh/arch/sh3-dsp.s: New file.
* testsuite/ld-sh/arch/sh3e.s: New file.
* testsuite/ld-sh/arch/sh4-nommu-nofpu.s: New file.
* testsuite/ld-sh/arch/sh4-nofpu.s: New file.
* testsuite/ld-sh/arch/sh4.s: New file.
* testsuite/ld-sh/arch/sh4a-nofpu.s: New file.
* testsuite/ld-sh/arch/sh4al-dsp.s: New file.
* testsuite/ld-sh/arch/sh4a.s: New file.
* i386.h (i386_optab): Remove fildd, fistpd and fisttpd.
opcodes/
* i386-dis.c (x_mode): Comment.
(two_source_ops): File scope.
(float_mem): Correct fisttpll and fistpll.
(float_mem_mode): New table.
(dofloat): Use it.
(OP_E): Correct intel mode PTR output.
(ptr_reg): Use open_char and close_char.
(PNI_Fixup): Handle possible suffix on sidt. Use op1out etc. for
operands. Set two_source_ops.
gas/testsuite/
* gas/i386/prescott.s: Remove fisttpd and fisttpq.
* gas/i386/prescott.d: Update.
* ia64-gen.c (in_iclass): Handle more postinc st
and ld variants.
* ia64-asmtab.c: Rebuilt.
gas/testsuite/
* gas/ia64/dv-raw-err.s: Add some new postinc tests.
* gas/ia64/dv-raw-err.l: Updated.
2004-04-30 H.J. Lu <hongjiu.lu@intel.com>
* config/obj-elf.c (get_section): New function.
(obj_elf_change_section): Support multiple sections with same
name.
gas/testsuite/
2004-04-30 H.J. Lu <hongjiu.lu@intel.com>
* gas/elf/elf.exp: Remove group1, add group1a and group1b for
section group.
* gas/elf/group1a.d: New file.
* gas/elf/group1b.d: Likewise.
* gas/elf/group1.e: Removed.
* elf32-sh.c (sh_elf_plt_sym_val): New function.
(elf_backend_plt_sym_val): Define.
opcodes/
* sh-dis.c (print_insn_sh): Print the value in constant pool
as a symbol if it looks like a symbol.
gas/testsuite/
* gas/sh/pcrel2.d: Update.
* gas/sh/tlsd.d: Update.
* gas/sh/tlsnopic.d: Update.
* gas/sh/tlspic.d: Update.
ld/testsuite/
* ld-sh/tlsbin-1.d: Update
* ld-sh/tlspic-1.d: Update.
(load_address, macro): Use load_delay_nop() to build a nop
which can be omitted with gpr_interlocks.
* gas/mips/lb-xgot-ilocks.d: Remove nops in load delay slot.
* gas/mips/mips-abi32-pic.d: Likewise.
* gas/mips/mips-abi32-pic2.d: Likewise.
* gas/mips/mips-gp32-fp32-pic.d: Likewise.
* gas/mips/mips-gp32-fp64-pic.d: Likewise.
* gas/mips/mips-gp64-fp32-pic.d: Likewise.
* gas/mips/mips-gp64-fp64-pic.d: Likewise.
* gas/mips/relax-swap1-mips2.d: Likewise.
* gas/mips/lb-svr4pic-ilocks.d: New test.
* gas/mips/mips.exp: Run it.
Zack Weinberg